A Water-Stable Luminescent Metal-Organic Framework for Rapid and Visible Sensing of Organophosphorus Pesticides

Dual-readout fluorescence 'turn-on' lateral flow immunoassay for sensitive detection of imidacloprid

Although imidacloprid (IMI) is a widely used, highly efficient, and broad-spectrum insecticide, it poses a serious threat to pollinators such as bees, which can significantly impact crop harvests. Therefore, there is an urgent need to develop a sensitive, portable, and economical method for detecting IMI. This study establishes a novel dual-readout fluorescence 'turn-on' mode lateral flow immunoassay (LFIA) based on the inner filter effect (IFE) for the detection of IMI. The assay combines hollow gold nanoparticles (HAuNPs) and ultra-bright red luminescent bovine serum albumin (BSA)-stabilised gold nanoclusters (BSA-AuNCs) as quencher/donor pairs. HAuNPs effectively quenched the red-emitting fluorescence of BSA-AuNCs due to the higher IFE efficiency resulting from the spectral overlap. The dual-readout immunosensor exhibited fluorescence and colorimetric responses for IMI within 16 min, with limits of detection (LOD) of 7.8 and 47.8 pg/mL for fluorescence and colorimetric modes, respectively. The fluorescence mode thus attained an approximately six-fold decrease in detection limits compared with conventional gold nanoparticle-based LFIA (AuNPs-LFIA). The dual-readout fluorescence 'turn-on' immunosensor showed a good recovery range of 82.40-113.80 % for detecting IMI in real samples, with a relative standard deviation (RSD) below 11.88 %. Thus, the developed immunosensor may be used as a rapid and highly sensitive tool for the detection of hazardous substances in practical applications.

Pesticide residues and their detection techniques in foods using sensors- a review

The use of pesticides in agricultural produce is continuously increasing and it raises the question of whether the food is safe or not. Only 0.1% of the sprayed pesticide reaches its target and the rest acts as a contaminant in soil and the environment, thus contaminating the future foods as well. The pesticide residue management is gaining attention as pesticide poisoning account for more than 3.5% of total deaths. The use of pesticides needs to be checked and applied in a controlled manner. Easy and rapid methods for the quantification of pesticides in foods need to be developed. In the present review, details about pesticides have been described in the first part. Secondly, the techniques and recent developments for the detection of pesticides have been summarized and finally, the emerging challenges and future perspectives for pesticide handling has been discussed with special emphasis on the use of Nano-sensors for pesticide detection.

Supplementary Information

The online version contains supplementary material available at 10.1007/s13197-024-06116-8.

Redox interference-free bimodal paraoxon sensing enabled by an aggregation-induced emission nanozyme catalytically hydrolyzing phosphoesters specifically

In view of the current serious situation of organophosphorus pesticides (OPs) residue contamination, developing rapid and accurate OPs sensors is a matter of urgency. Redox-nanozyme based colorimetric sensors have been widely researched and utilized in OPs residue determination, but overcoming the interference of external redox substances and the effect of single-signal modes on detection performance is still a challenge. Here we fabricated a Zr-based metal-organic framework (MOF) featuring specific phosphatase-like activity and strong aggregation-induced emission (AIE) fluorescence for redox interference-free bimodal pesticide sensing. In the MOF, the activity-tunable Zr4+ node offered high hydrolytic activity and affinity toward P-O containing substrates, and the rigid framework structure effectively enhanced the fluorescence emission of the ligand 1,1,2,2-tetra(4-carboxylphenyl)ethylene. The developed AIEzyme could efficiently catalyze the hydrolysis of paraoxon to yellow p-nitrophenol, which further reduced the intrinsic AIE fluorescence of AIEzyme through internal filtration effect. Thereby, a natural enzyme-free dual-mode colorimetric/fluorescence approach was established for paraoxon detection with no interference from redox substances, and a smartphone-assisted portable platform was further developed to enable the facile, rapid, and high-performance sensing of the pesticide in complex practical matrices.

Synthesis of highly sensitive and multi-response Eu-MOF, fluorescence sensing properties and anti-counterfeiting applications

A new Europium metal-organic framework (Eu-MOF), namely [Eu(dpa) (H2O)]·0.5(bpy)·4H2O}n (H4dpa = 5-(3,4-dicarboxyphenoxy) isophenic acid, bpy = protonated 4,4'-bipyridine) was synthesized and structurally characterized by elemental analyses, infrared spectroscopy, and X-ray single-crystal diffraction analyses. Eu-MOF shows a three-dimensional network structure based on EuIII ions and (dpa)4- ligands via µ4: η1, η2, η2, η2 coordination mode. Fluorescence analysis shows that Eu-MOF has excellent fluorescence sensing characteristics, which can efficiently and sensitively detect various pollutants in water: the limit of detection (LOD) of ratiometric fluorescence detection of ANI in water was 42.9 nM, which was better than the single-peak detection limit. In addition, the peak detection limits of Eu-MOF for Flu, ORN and NB were 120 nM, 27 nM and 94 nM, respectively. In addition, XPS, LUMO orbital energy level, fluorescence lifetime, ultraviolet absorption and other principles are used to explore the mechanism of fluorescence quenching. Surprisingly, Eu-MOF not only has excellent anti- counterfeiting ability and stability, can be used as anti-counterfeiting material in life, but also has good selectivity to Flu. Eu-MOF has obvious fluorescence quenching effect on Flu on paper under ultraviolet light, which can be used for rapid in situ imaging test paper of pesticide residues.

Fluorescent Ionic Liquid Aggregates: A Self-Assembled Approach for Pesticide Detection and Catalysis

The unregulated use of pesticides, industrial discharge of heavy metals, waste, and agricultural runoff may contaminate surface water and groundwater, consequently threatening ecosystems and human health. Thus, the sensitive detection and degradation of pesticides are essential for safety. In this context, herein, we have developed benzimidazolium-based fluorescent surfactant assemblies TA-1/SDS and TA-2/SDBS, which exhibit aggregation-induced emission enhancement in an aqueous medium. The aggregates (TA-1/SDS and TA-2/SDBS) displayed a turn-on emission response upon interaction with carbendazim and azamethiphos with limits of detection 7.5 and 7.8 nM, respectively. The FE-SEM and AFM studies revealed that TA-1/SDS and TA-2/SDBS undergo self-assembly with the addition of AZA and CBZ, resulting in the formation of dendritic structures. In addition to the quantification of AZA and CBZ, TA-1/SDS and TA-2/SDBS have also been evaluated to degrade both pesticides and validated using 31P NMR spectroscopy and LC-MS spectrometry.

CLICK-FLISA Based on Metal-Organic Frameworks for Simultaneous Detection of Fumonisin B1 (FB1) and Zearalenone (ZEN) in Maize

Mycotoxins are secondary products produced primarily by fungi and are pathogens of animals and cereals, not only affecting agriculture and the food industry but also causing great economic losses. The development of rapid and sensitive methods for the detection of mycotoxins in food is of great significance for livelihood issues. This study employed an amino-functionalized zirconium luminescent metal-organic framework (LOF) (i.e., UiO-66-NH2). Click chemistry was utilized to assemble UiO-66-NH2 in a controlled manner, generating LOF assemblies to serve as probes for fluorescence-linked immunoassays. The proposed fluoroimmunoassay method for Zearalenone (ZEN) and Fumonisin B1 (FB1) detection based on the UiO-66-NH2 assembled probe (CLICK-FLISA) afforded a linear response range of 1-20 μmol/L for ZEN, 20 μmol/L for FB1, and a very low detection limit (0.048-0.065 μmol/L for ZEN; 0.048-0.065 μmol/L for FB1). These satisfying results demonstrate promising applications for on-site quick testing in practical sample analysis. Moreover, the amino functionalization may also serve as a modification strategy to design luminescent sensors for other food contaminants.

Morphology Control of Zr-Based Luminescent Metal-Organic Frameworks for Aflatoxin B1 Detection

Metal-organic frameworks (MOFs) have gained significant prominence as sensing materials owing to their unique properties. However, understanding the correlation between the morphology, properties, and sensing performance in these MOF-based sensors remains a challenge, limiting their applications and potential for improvement. In this study, Zr-MOF was chosen as an ideal model to explore the impact of the MOF morphology on the sensing performance, given its remarkable stability and structural variability. Three luminescent MOFs (namely rod-like Zr-LMOF, prismoid-like Zr-LMOF, and ellipsoid-like Zr-LMOF) were synthesized by adjusting the quantities of the benzoic acid and the reaction time. More importantly, the sensing performance of these Zr-LMOFs in response to aflatoxin B1 (AFB1) was thoroughly examined. Notably, the ellipsoid-like Zr-LMOF exhibited significantly higher sensitivity compared to other Zr-LMOFs, attributed to its large specific surface area and pore volume. Additionally, an in-depth investigation into the detection mechanism of AFB1 by Zr-LMOFs was conducted. Building upon these insights, a ratiometric fluorescence sensor was developed by coordinating Eu3+ with ellipsoid-like Zr-LMOF, achieving a remarkably lower detection limit of 2.82 nM for AFB1. This study contributes to an improved comprehension of the relationship between the MOF morphology and the sensing characteristics while presenting an effective approach for AFB1 detection.

A Dual-Mode Fluorescent Nanoprobe for the Detection and Visual Screening of Pathogenic Bacterial Spores

Bacterial vegetative cells turn into metabolically dormant spores in certain environmental situations. Once suitable conditions trigger the germination of spores belonging to the pathogenic bacterial category, public safety and environmental hygiene will be threatened, and lives will even be endangered when encountering fatal ones. Instant identification of pathogenic bacterial spores remains a challenging task, since most current approaches belonging to complicated biological methods unsuitable for onsite sensing or emerging alternative chemical techniques are still inseparable from professional instruments. Here we developed a polychromatic fluorescent nanoprobe for ratiometric detection and visual inspection of the pathogenic bacterial spore biomarker, dipicolinic acid (DPA), realizing rapidly accurate screening of pathogenic bacterial spores such as Bacillus anthracis spores. The nanoprobe is made of aminoclay-coated silicon nanoparticles and functionalized with europium ions, exhibiting selective and sensitive response toward DPA and Bacillus subtilis spores (simulants for Bacillus anthracis spores) with excellent linearity. The proposed sensing strategy allowing spore determination of as few as 0.3 × 105 CFU/mL within 10 s was further applied to real environmental sample detection with good accuracy and reliability. Visual quantitative determination can be achieved by analyzing the RGB values of the corresponding test solution color via a color recognition APP on a smartphone. Different test samples can be photographed at the same time, hence the efficient accomplishment of examining bulk samples within minutes. Potentially employed in various on-site sensing occasions, this strategy may develop into a powerful means for distinguishing hazardous pathogens to facilitate timely and proper actions of dealing with multifarious security issues.

Highlights in Interface of Wastewater Treatment by Utilizing Metal Organic Frameworks: Purification and Adsorption Kinetics

Polluted water has become a concern for the scientific community as it causes many severe threats to living beings. Detection or removal of contaminants present in wastewater and attaining purity of water that can be used for various purposes are a primary responsibility. Different treatment methods have already been used for the purification of sewage. There is a need for low-cost, highly selective, and reusable materials that can efficiently remove pollutants or purify contaminated water. In this regard, MOFs have shown significant potential for applications such as supercapacitors, drug delivery, gas storage, pollutant adsorption, etc. The outstanding structural diversity, substantial surface areas, and adjustable pore sizes of MOFs make them superior candidates for wastewater treatment. This Review provides an overview of the interaction science and engineering (kinetic and thermodynamic aspects with interactions) underpinning MOFs for water purification. First, fundamental strategies for the synthesis methods of MOFs, different categories, and their applicability in wastewater treatment are summarized, followed by a detailed explanation of various interaction mechanisms. Finally, current challenges and future outlooks for research on MOF materials toward the adsorption of hazardous components are discussed. A new avenue for modifying their structural characteristics for the adsorption and separation of hazardous materials, which will undoubtedly direct future work, is also summarized.

Metal-Organic Frameworks Based Sensor Platforms for Rapid Detection of Contaminants in Wastewater

Metal-organic frameworks (MOFs) are a type of multifunctional material with organic-inorganic doped metal complexes that have a lot of unsaturated metal sites and a consistent network structure. MOFs work has great performance for enhancing the mass transfer, signal, and sensitivity as well as analyte enrichment. This study highlights the recent advancements of MOFs-based sensors for pollutant detection in a water environment and summarizes the effect of various synthetic materials on the performance of MOFs-based sensors. The related challenges and optimization techniques have been discussed. Then the research results of various MOFs sensors in the detection of wastewater pollutants are analyzed. Finally, the challenges facing MOFs-based water sensor development and the outlook for future research are discussed.

Exfoliation of a Coordination Polymer Based on a Linear π-Conjugated Ligand into an Ultrathin Nanosheet for Glyphosate Sensing

Owing to the large-scale consumption of pesticides and their potential threats to the environment and human health, the development of sensing materials for pesticides has attracted considerable attention in recent years. In this work, a novel Cd(II)-based coordination polymer (CP) with the formula [Cd(H2O)2(L)]·DMF (Cd-1, DMF = N,N-dimethylformamide, H2L = 4,4'-[(2,5-dimethoxy-1,4-phenylene)di-2,1-ethenediyl]bis-benzoic acid) was synthesized under solvothermal conditions. Structural analysis revealed that coordination between central Cd2+ cations and the ligand L2- formed two-dimensional (2D) networks, which were further assembled by noncovalent hydrogen bonds into a three-dimensional (3D) supramolecular framework. Through ultrasonic treatment in isopropyl alcohol, Cd-1 was exfoliated to afford an ultrathin CP-based 2D nanosheet (Cd-1-NS) with a thickness of less than 1.8 nm. Compared to the bulk materials, the prepared Cd-1-NS exhibited enhanced fluorescence emission properties and superior sensing performance toward glyphosate (Glyph) in water with high selectivity, sensitivity, anti-interference, fast response, and good recyclability via the turn-off effect. The limit of detection (LOD) of Cd-1-NS for Glyph was as low as 41 nM (7 ppb) in the low-concentration range of 0-2.4 μM. In addition, the Cd-1-NS also showed excellent practicability and reliability for the detection of Glyph in real samples, including lake water, tap water, cabbage, and watermelon skin, and could realize the rapid visualized sensing of Glyph residues on the surfaces of vegetables and fruits.

Fluorescent and smartphone imaging detection of tetracycline residues based on luminescent europium ion-functionalized the regular octahedral UiO-66-NH2

Antibiotic residues cause extensive damage to food security, thus arousing serious concerns. Hence, rapid and sensitive detection of antibiotic residues is crucial to food safety. This study aimed to propose a portable, visual, intelligent and rapid method for tetracycline detection. We developed a ratiometric fluorescent sensor based on the Eu3+-functionalized regular octahedral UiO-66-NH2 material. The developed sensor could quantify tetracycline in the concentration range of 0.5-200 μM with a detection limit as low as 0.2 μM under the optimum conditions. Furthermore, the analytical results obtained using the designed sensor in the actual samples were basically consistent with those obtained using high-performance liquid chromatography. Based on these achievements, a smartphone application-integrated fluorescent testing paper was designed for facile, intelligent, and visual detection of tetracycline. The integrated portable sensor not only saved cost and time for testing but also provided a forward-looking approach to fast, sensitive detection of antibiotic residues.

A Recent Advancement in Food Quality Assessment: Using MOF-Based Sensors: Challenges and Future Aspects

Monitoring food safety is crucial and significantly impacts the ecosystem and human health. To adequately address food safety problems, a collaborative effort needed from government, industry, and consumers. Modern sensing technologies with outstanding performance are needed to meet the growing demands for quick and accurate food safety monitoring. Recently, emerging sensors for regulating food safety have been extensively explored. Along with the development in sensing technology, the metal-organic frameworks (MOF)-based sensors gained more attention due to their excellent sensing, catalytic, and adsorption properties. This review summarizes the current advancements and applications of MOFs-based sensors, including colorimetric, electrochemical, luminescent, surface-enhanced Raman scattering, and electrochemiluminescent sensors. and also focused on the applications of MOF-based sensors for the monitoring of toxins such as heavy metals, pesticide residues, mycotoxins, pathogens, and illegal food additives from food samples. Future trends, as well as current developments in MOF-based materials.

Noble metal-free SERS: mechanisms and applications

Surface-enhanced Raman scattering (SERS) is a very important tool in vibrational spectroscopy. The coupling of nanomaterials induces local surface plasmon resonance (LSPR), which contributes greatly to SERS. Due to its remarkable sensitivity in trace detection, SERS has gained prominence in the fields of catalysis, biosensors, drug tracking, and optoelectronic devices. SERS activity is believed to be closely related to the LSPR and charge transfer (CT) of the material. Noble metal nanostructures have been commonly used as SERS-active substrates due to their strong local electric fields and relatively mature preparation, application, and enhancement mechanisms. In recent years, SERS research based on semiconductor materials has attracted significant attention because semiconductor materials have advantages such as repeatable preparation, simple pretreatment, stable SERS spectra and superior biocompatibility, stability, and reproducibility. Semiconductor-based SERS has the potential to enrich SERS theory and applications. Thus, the development of semiconductor materials will introduce a new epoch for SERS-based research. In this review, we outline the two main kinds of semiconductor SERS-active substrates: inorganic and organic semiconductor SERS-active substrates. We also provide an overview of the SERS mechanism for different kinds of materials and SERS-based applications.

Exploring Various Photochemical Processes in Optical Sensing of Pesticides by Luminescent Nanomaterials: A Concise Discussion on Challenges and Recent Advancements

Food safety is a burning global issue in this present era. The prevalence of harmful food additives and contaminants in everyday food is a significant cause for concern as they can adversely affect human health. More particularly, among the different food contaminants, the use of excessive pesticides in agricultural products is severely hazardous. So, the optical detection of residual pesticides is an effective strategy to counter the hazardous effect and ensure food safety. In this perspective, nanomaterials have played a leading role in defending the open threat against food safety instigated by the reckless use of pesticides. Now, nanomaterial-based optical detection of pesticides has reached full pace and needs an inclusive discussion. This Review covers the advancement of photoprocess-based optical detection of pesticides categorically using nanomaterials. Here, we have thoroughly dissected the photoprocesses (aggregation and aggregation-induced emission (AIE), charge transfer and intramolecular charge transfer (ICT), electron transfer and photoinduced electron transfer (PET), fluorescence resonance energy transfer (FRET), hydrogen bonding, and inner filter effect) and categorically demarcated their significant role in the optical detection of pesticides by luminescent nanomaterials over the last few years.

Sensitive fluorescent detection of phosmet and chlortetracycline in animal-derived food samples based on a water-stable Cd(II) chain-based zwitterionic metal-organic framework

The residues of pesticides and antibiotics have always been a major concern in agriculture and food safety. In order to provide a new method for the rapid detection of organophosphorus pesticides and antibiotics, a novel Cd(II) chain-based zwitterionic metal-organic framework MOF 1 with high sensitivity fluorescence sensing performance was successfully synthesized. A series of researches showed that the water- and pH-stable bifunctional MOF 1 has a great ability to detect phosmet (PSM) and chlortetracycline (CTC) in water through fluorescence quenching effect, with high detection sensitivity, low detection limits (0.0124 μM and 0.0131 μM), short response time (40 s) and reusability. Practical application results revealed that MOF 1 could detect PSM and CTC in milk, beef, chicken and egg samples, with satisfactory recoveries (95.2%-103.7%). As a novel fluorescence probe, MOF 1, is known the first case that can detect PSM in animal-derived samples, and the first dual-function material capable of detecting PSM and CTC. Mechanism studies displayed that competitive absorption and photoinduced electron transfer clearly authenticate the high quenching performance of the material.

Highly sensitive fluorescent quantification of carbendazim by two-dimensional Tb-MOF nanosheets for food safety

Carbendazim (CBZ), a well-known benzimidazole pesticide, is utilized in agriculture to prevent and cure plant diseases caused by fungi. Residual CBZ in food poses serious threat to human health. Herein, a fluorescent two-dimensional terbium-based metal-organic framework (2D Tb-MOF) nanosheet sensor was developed for the rapid and ultrasensitive detection of CBZ. The 2D Tb-MOF nanosheets, prepared with Tb³⁺ ions and 5-borono-1,3-benzenedicarboxylic acid (BBDC) as the precursors, exhibited excellent optical properties. Upon the addition of CBZ, the fluorescence of Tb-MOF nanosheets was quenched because of the inner filter effect (IFE) and dynamic quenching. The fluorescence sensor offered two linear ranges of 0.06-4 and 4-40 µg/mL with a low detection limit of 17.95 ng/mL. Furthermore, the proposed sensing platform was successfully applied to assay CBZ in apples and tea, and satisfactory results were obtained. This study provides an effective alternative strategy for the qualitative and quantitative determination of CBZ to ensure food safety.

Lanthanide bimetallic MOF-based fluorescent sensor for sensitive and visual detection of sulfamerazine and malachite

A lanthanide terbium/europium metal-organic framework (Tb_0.6Eu_0.4-MOF) was prepared by one-step solvothermal method at room temperature. A series of characterizations including scanning electron microscopy, powder X-ray diffraction spectra, Fourier transform infrared spectra and X-ray photoelectron spectroscopy were carried out to clarify the physical characteristics of the synthesized material. The data clarified that the prepared Tb_0.6Eu_0.4-MOF possessed rod-like morphology with a width of 1-2 μm, and had good crystal structure, good stability, response speed and excitation-independent emission feature. The bunchy Tb_0.6Eu_0.4-MOF was then used to construct fluorescent sensors for rapid identification of malachite green and sulfamerazine. It was revealed that the detection mechanism was inner filter effect. The effects of different parameters such as excitation wavelength and incubation times were investigated on the fluorescence analysis performance. The data clarified that the optimal excitation wavelength and incubation time was 240 nm and 3 min, respectively. The detection platform exhibited the high sensitivity and selectivity toward malachite green in the linear range of 2-180 μM and determined limit of detection was 1.12 μM. Besides, the proposed sensor allowed sensitive detection of sulfamerazine in the linear range of 2-140 μM with a low detection limit of 0.1 μM. Meaningfully, a smartphone application was designed to assist the proposed sensor to realize visual, intelligent and rapid detection of malachite green and sulfamerazine. Furthermore, the practical application of the proposed sensor has been also verified by high performance liquid chromatography, showing good accuracy, sensitivity and satisfactory recoveries. The results suggested that the Tb_0.6Eu_0.4-MOF-based ratiometric fluorescent sensor had the potential to become a promising technique for rapid detection of malachite green or sulfamerazine with smartphone application. Therefore, the prepared Tb_0.6Eu_0.4-MOF is one kind of efficient and cost-effective potential materials for developing fluorescent sensor for rapid, sensitive and selective detection of sulfamerazine and malachite.

Impact of historical legacy pesticides on achieving legislative goals in Europe

Pesticides are widely used in agriculture to optimise food production. However, the movement of pesticides into water bodies negatively impacts aquatic environments. The European Union (EU) aims to make food systems fair, healthy and environmentally friendly through its current Farm to Fork strategy. As part of this strategy, the EU plans to reduce the overall use and risk of chemical pesticides by 50 % by 2030. The attainment of this target may be compromised by the prevalence of legacy pesticides arising from historical applications to land, which can persist in the environment for several decades. The current EU Farm to Fork policy overlooks the potential challenges of legacy pesticides and requirements for their remediation. In this review, the current knowledge regarding pesticide use in Europe, as well as pathways of pesticide movement to waterways, are investigated. The issues of legacy pesticides, including exceedances, are examined, and existing and emerging methods of pesticide remediation, particularly of legacy pesticides, are discussed. The fact that some legacy pesticides can be detected in water samples, more than twenty-five years after they were prohibited, highlights the need for improved EU strategies and policies aimed at targeting legacy pesticides in order to meet future targets.

Tb3+-Based Off-On Fluorescent Platform for Multicolor and Dosage-Sensitive Visualization of Bacterial Spore Marker

Developing a novel strategy for the sensitive and rapid detection of pathogenic bacterial spores in field or on-site settings will be helpful in minimizing their potential threats to human health, environmental safety, and food safety. In this study, Tb³⁺ was combined with glutathione (GSH)-modified copper nanoclusters (CuNCs), and an aggregation-induced emission (AIE) fluorescent probe based on Tb-GSH-CuNCs was fabricated for dipicolinic acid (DPA, a pathogenic bacterial spore marker) sensing. Making use of the competitive binding of Tb³⁺ between GSH-CuNCs and DPA, a multicolor sensing of DPA was facilely realized without introducing fluorescent materials as the reference. Due to an "off-on" response mechanism of the AIE fluorescent probe, this multicolor response to DPA exhibited a feature of rich color gradients and highly discriminative color change, allowing a dosage-sensitive visual quantification of DPA. The DPA with a concentration even as low as 0.5 μM can still be identified by the naked eye. Moreover, together with a smartphone app, which can extract the R (red), G (green), and B (blue) values from the probe system, a portable platform can be established for sensitive DPA quantification in the range of 0.5-70 μM, showing great potential for the practical monitoring of DPA in field or on-site settings.

Multifunctional Cd-CP for fluorescence sensing of Cr(VI), MnO4-, acetylacetone and ascorbic acid in aqueous solutions

The development of multifunctional fluorescent chemosensors for the detection of multiple targets remains challenging but of great importance. In this paper, one novel coordination polymer (CP), denoted as [Cd₂(edda)(phen)₂]∙H₂O (compound 1, H₄edda = 5,5' (ethane-1,2-diylbis(oxy)) diisophthalic acid, phen = 1,10-phenanthroline) is successfully designed and prepared under hydrothermal conditions. Structural analysis indicates that compound 1 possesses a one-dimensional (1D) double chain structure, then self-assembles into a three-dimensional (3D) supramolecular framework via π…π interactions between phen molecules. Interestingly, compound 1 is found to be tolerant in wide range of acidic to alkaline aqueous solutions (pH = 2-13). Fluorescent spectral investigations reveal that compound 1 exhibits highly selective and sensitive fluorescence responses toward MnO₄^-, Cr(VI) ions, acetylacetone (acac) and ascorbic acid (AA) by fluorescence quenching in the aqueous phase. The detection limits are in the very low range, reaching μM level for the detection of MnO₄^-, Cr(VI) ions, nM for AA and ppm for acac detection. The distinguished multi-responsive performance suggests compound 1 to be a potential multifunctional probe. Furthermore, the possible quenching mechanisms have also been systematically investigated in this work.

Improved charge-transfer resonance in graphene oxide/ZrO2 substrates for plasmonic-free SERS determination of methyl parathion

This work reports a sensitive SERS substrate based on graphene oxide (GO) and quantum-sized ZrO₂ nanoparticles (GO/ZrO₂) for label-free determination of the organophosphate pesticide methyl parathion (MP). The enhanced light-matter interactions and the consequent SERS effect in these substrates resulted from the effective charge transfer (CT) mechanism attributed to synergistic contributions of three main factors: i) the strong molecular adherence of the MP molecules and the ZrO₂ surface which allows the first layer-effect, ii) the relatively abundant surface defects in low dimensional ZrO₂ semiconductor NPs, which act as intermediate electronic states that reduce the large bandgap barrier, and iii) the hindered charge recombination derived from the transference of the photoinduced holes to the GO layer. This mechanism allowed an enhancement factor of 8.78 × 10⁴ for GO/ZrO₂-based substrates, which is more than 5-fold higher than the enhancement observed for platforms without GO. A detection limit of 0.12 μM was achieved with an outstanding repeatability (variation ≤4.5%) and a linear range up to 10 μM, which is sensitive enough to determine the maximal MP concentration permissible in drinking water according to international regulations. Furthermore, recovery rates between 97.4 and 102.1% were determined in irrigation water runoffs, strawberry and black tea extracts, demonstrating the reliability of the hybrid GO/ZrO₂ substrate for the organophosphate pesticides quantification in samples related to agri-food sectors and environmental monitoring.

Zn-MOFs composites loaded with silver nanoparticles are used for fluorescence sensing pesticides, Trp, EDA and photocatalytic degradation of organic dyes

The abuse of pesticides, antibiotics, organic solvents, etc., not only deteriorates the ecological environment, but even affects the normal development of organisms, posing a serious threat to global public health.Efficient and sensitive detection of pesticides, antibiotics, organic solvents and so on are very important, but also a challenge to scientists. By depositing Ag nanoparticles on the surface of Zn-MOF (1: {[Zn₂(bta)(bpy)(H₂O)₂]·2H₂O}_n), a new type of composite material (Ag@1) was successfully synthesized and analyzed by TEM, EDS, XPS, XRD, IR and other characterization methods. Ag@1 can serve as multi-response fluorescence sensor to detect pesticides (fluazinam (FLU) and emamectin benzoate (EMB)), Tryptophan (Trp) and Ethylenediamine (EDA). In particular, Ag@1 showed "turn-off" fluorescence sensing for FLU and EDA, and "turn-on" fluorescence sensing for EMB and Trp. It is worth mentioning that we further explored its analysis of FLU and Trp in real water samples and fetal bovine serum. The recoveries are satisfactory, 97.95 % - 102.39 % and 96.69 % - 101.85 %, respectively. In addition, the photocatalytic performance of Ag@1 was found to be excellent, the degradation rate of methylene blue (MB) reached 86 %, and its degradation mechanism was discussed.

Water stable MOFs as emerging class of porous materials for potential environmental applications

Metal-organic frameworks (MOFs) are extensively recognized for their wide applications in a variety of fields such as water purification, adsorption, sensing, catalysis and drug delivery. The fundamental characteristics of the majority of MOFs, such as their structure and shape, are known to be sensitively impacted by water or moisture. As a result, a thorough evaluation of the stability of MOFs in respect to factors linked to these property changes is required. It is quite rare for MOFs in their early stages to have strong water-stability, which is necessary for the commercialization and development of wider applications of this interesting material. Also, numerous applications in presence of water have progressed considerably as a "proof of concept" stage in the past and a growing number of water-stable MOFs (WSMOFs) have been discovered in recent years. This review discusses the variables and processes that affect the aqueous stability of several MOFs, including imidazolate and carboxylate frameworks. Accordingly, this article will assist researchers in accurately evaluating how water affects the stability of MOFs so that effective techniques can be identified for the advancement of water-stable metal-organic frameworks (WSMOFs) and for their effective applications toward a variety of fields.

Metal-organic frameworks for food contaminant adsorption and detection

Metal-organic framework materials (MOFs) have been widely used in food contamination adsorption and detection due to their large specific surface area, specific pore structure and flexible post-modification. MOFs with specific pore size can be targeted for selective adsorption of some contaminants and can be used as pretreatment and pre-concentration steps to purify samples and enrich target analytes for food contamination detection to improve the detection efficiency. In addition, MOFs, as a new functional material, play an important role in developing new rapid detection methods that are simple, portable, inexpensive and with high sensitivity and accuracy. The aim of this paper is to summarize the latest and insightful research results on MOFs for the adsorption and detection of food contaminants. By summarizing Zn-based, Cu-based and Zr-based MOFs with low cost, easily available raw materials and convenient synthesis conditions, we describe their principles and discuss their applications in chemical and biological contaminant adsorption and sensing detection in terms of stability, adsorption capacity and sensitivity. Finally, we present the limitations and challenges of MOFs in food detection, hoping to provide some ideas for future development.

Recent advances in determination applications of emerging films based on nanomaterials

Sensitive and facile detection of analytes is crucial in various fields such as agriculture production, food safety, clinical diagnosis and therapy, and environmental monitoring. However, the synergy of complicated sample pretreatment and detection is an urgent challenge. By integrating the inherent porosity, processability and flexibility of films and the diversified merits of nanomaterials, nanomaterial-based films have evolved as preferred candidates to meet the above challenge. Recent years have witnessed the flourishment of films-based detection technologies due to their unique porous structures and integrated physical/chemical merits, which favors the separation/collection and detection of analytes in a rapid, efficient and facile way. In particular, films based on nanomaterials consisting of 0D metal-organic framework particles, 1D nanofibers and carbon nanotubes, and 2D graphene and analogs have drawn increasing attention due to incorporating new properties from nanomaterials. This paper summarizes the progress of the fabrication of emerging films based on nanomaterials and their detection applications in recent five years, focusing on typical electrochemical and optical methods. Some new interesting applications, such as point-of-care testing, wearable devices and detection chips, are proposed and emphasized. This review will provide insights into the integration and processability of films based on nanomaterials, thus stimulate further contributions towards films based on nanomaterials for high-performance analytical-chemistry-related applications.

Adsorption and removal of organophosphorus pesticides from Chinese cabbages and green onions by using metal organic frameworks based on the mussel-inspired adhesive interface

Based on the mussel-inspired adhesive interface (Fe3O4-g-C3N4@PDA), a novel bionic metal-organic framework (Fe3O4-g-C3N4-PDA@MIL-101) was successfully prepared. The composite featured a high specific surface area and a multi-microchannel structure, as well as strong thermochemical stability. The structural property of Fe3O4-g-C3N4-PDA@MIL-101(Fe) was characterized, and the results indicated that Fe3O4, PDA, and MIL-101(Fe) were uniformly coated on the g-C3N4 surface. The adsorption and desorption of organophosphorus pesticides with Fe3O4-g-C3N4-PDA@MIL-101(Fe) were evaluated by batch experiments. This composite showed high adsorption efficiency and selective removal of coralox, phosalone, and chlorpyrifos. Under the optimal conditions, three organophosphorus pesticides were adsorbed from Chinese cabbage and green onion samples with Fe3O4-g-C3N4-PDA@MIL-101(Fe). The analytical method exhibited high sensitivity (LOD, 0.19-2.34 μg/L; LOQ, 0.65-7.82 μg/L), excellent practicality, and good stability, suggesting that Fe3O4-g-C3N4-PDA@MIL-101 was an ideal candidate magnetic adsorbent for the removal of organophosphorus pesticides in Chinese cabbage and green onion samples.

Facile synthesis of dual-ligand terbium-organic gels as ratiometric fluorescence probes for efficient mercury detection

Mercury (Hg) pollution can negatively impact ecosystems, and there is a need for simple Hg²⁺ monitoring platforms. Here, a dual-ligand fluorescence probe based on terbium-organic gels (Tb-L_0.2P_0.8 MOGs) was constructed for efficient Hg²⁺ detection. Tb-L_0.2P_0.8 MOGs were developed through a facile room-temperature gelation method, showing two emission peaks derived from luminol and Tb³⁺ at 424 nm and 544 nm, respectively. The aggregation-induced emission (AIE) effect between luminol and Tb³⁺ led to luminol with blue fluorescence. However, Hg²⁺ could dramatically quench the fluorescence signal of luminol at 424 nm because of the intense coordination interaction of Hg²⁺ with luminol and photo-induced electron transfer (PET). The Phen ligand could sensitize the luminescence of Tb³⁺ and offer a reference fluorescence, thus resulting in a unique ratiometric fluorescence response toward Hg²⁺. This novel nanoprobe had excellent linearity with Hg²⁺ concentrations range of 0.1-30 μM; the detection limit was 3.6 nM. The analysis of real samples showed the potential application of MOGs for measuring Hg²⁺ in porphyra and tap water. Mixed ligands were introduced for high-efficiency strategies to improve the analytical performance by regulating the emission behavior of MOGs.

Self-luminescent europium based metal organic frameworks nanorods as a novel electrochemiluminescence chromophore for sensitive ulinastatin detection in biological samples

In this work, we developed a novel electrochemiluminescence (ECL) biosensor for ulinastatin (UTI) detection based on self-luminescent metal-organic framework (L-MOF) nanomaterials. The L-MOFs could be simply prepared by one-pot methods using Eu³⁺ and 4,4',4″-s-triazine-1,3,5-triyltri-m-aminobenzoic acid (H₃TATAB) as the metallic center and organic ligand, respectively. The Eu-TATAB exhibited high efficiency and stable ECL performance when using K₂S₂O₈ as coreactant. For the established biosensor, Eu-TATAB was both used as the ECL chromophore and protein carrier due to its outstanding biocompatibility and large superficial area, which could load sufficient antibodies to link with antigen in the biosensor for subsequent detection. The established sandwich ECL biosensor showed a wide linear range of 0.1 ng mL^-1 - 10⁵ ng mL^-1 and a low limit of detection of 9.7 pg mL^-1 for UTI detection. In addition, the developed ECL biosensor could also be successfully applied to the real UTI sample determination in serum. The reported biosensor strategy could provide a guide for developing more other novel and promising high-performance ECL nanomaterials, and also be used as a potential method for ultrasensitive UTI detection in disease research.

Dye-Encapsulated Lanthanide-Based Metal-Organic Frameworks as a Dual-Emission Sensitization Platform for Alachlor Sensing

As an important factor affecting global agricultural output, pesticides have a significant impact on the ecosystem. It is an urgent task to accurately and conveniently detect pesticide residues after their application. Herein, a fluorescent dye@MOF platform was designed via the encapsulation of rhodamine B (RhB) into the MOF structure (named RhB@HNU-48), which can significantly enhance the sensing sensitivity of alachlor with an ultralow detection limit of 0.59 ppb. The improved sensitivity of RhB@HNU-48 to pesticides was attributed to the host-guest interactions that affect the excitation and emission spectra of the composites. Based on the sensing capability of RhB@HNU-48, a logic gate was built to evaluate the safety level of alachlor residues in rivers and soil. The preparation of photofunctionalized MOF composites through modulation of host-guest interactions offers a promising strategy for the construction of desired sensors for agricultural residues.

Smart MOF-on-MOF Hydrogel as a Simple Rod-shaped Core for Visual Detection and Effective Removal of Pesticides

The immoderate use of pesticides in the modern agricultural industry has led to the pollution of water resources and ultimately threatens the human body. Herein, two metal-organic frameworks (MOFs), namely {[Zn(tpt)₂ ·2H₂ O]}_n (Zn1) and {[Zn₂ (tpt)₂ (bdc)]}_n (Zn2), (Htpt = 5-[4(1H-1,2,4-triazol-1-yl)]phenyl-2H-tetrazole), respectively, are constructed as smart materials for visual and on-site detection of pesticides and their removal from water. The exposed nitrogen-rich sites and high chemical stability make Zn2 a self-assembly core to further fabricate MOF-on-MOF-sodium alginate (ZIF-8-on-Zn2@SA) composite by wrapping ZIF-8 on the outside surface. Inheriting the excellent fluorescent emission of Zn2, the rod-like ZIF-8-on-Zn2@SA module exhibits naked-eye detection of thiophanate-methyl (TM) in real fruits and vegetables with a broad linear range (10-100 × 10^-6  m), a low limit of detection (LOD = 0.14 × 10^-6  m), and satisfactory recoveries (98.30-102.70%). In addition, carbendazim (CBZ), the metabolite of TM after usage in crops, can be efficiently removed from water by the ZIF-8-on-Zn2@SA (q_max  = 161.8 mg g^-1 ) with a high correlation coefficient (R²  > 0.99). Therefore, the portable ZIF-8-on-Zn2@SA sensing platform presents a promising candidate for monitoring and removal of pesticides, especially suitable for regions with serious pesticide environmental pollution.

Metal-Organic Frameworks in Agriculture

Agrochemicals, which are crucial to meet the world food qualitative and quantitative demand, are compounds used to kill pests (insects, fungi, rodents, or unwanted plants). Regrettably, there are some important issues associated with their widespread and extensive use (e.g., contamination, bioaccumulation, and development of pest resistance); thus, a reduced and more controlled use of agrochemicals and thorough detection in food, water, soil, and fields are necessary. In this regard, the development of new functional materials for the efficient application, detection, and removal of agrochemicals is a priority. Metal-organic frameworks (MOFs) with exceptional sorptive, recognition capabilities, and catalytical properties have very recently shown their potential in agriculture. This Review emphasizes the recent advances in the use of MOFs in agriculture through three main views: environmental remediation, controlled agrochemical release, and detection of agrochemicals.

Non-biological fluorescent chemosensors for pesticides detection

The ongoing poisoning of agricultural products has pushed the security problem to become an important issue. Among them, exceeding the standard rate of pesticide residues is the main factor influencing the quality and security of agricultural products. Moreover, the abuse of pesticides has introduced a large amount of residues in soil and drinking water, which will enter the food chain to the human body, leading to neurological disorders and cancer. Therefore, great efforts have been devoted to developing fluorescent sensors for detecting pesticide in a facile, quickly, sensitive, selective, accurate manner, which exhibit greater advantages than some traditional methods. In this review, we mainly focus on summarizing the non-biological fluorescent probes for organic pesticides detection with the detection limit of micromole to nanomole, including organic functional small molecules, calixarenes and pillararenes, metal organic framework systems, and nanomaterials. Meanwhile, we described the different sensing mechanisms for pesticides detection of these mentioned fluorescent sensors, the detection limit of each pesticide, the application in detecting actual samples, as well as their respective advantages and development prospects associated with present non-biological fluorescent sensors.

ESIPT Active Assemblies for 'On-On' Detection, Cell Imaging and Hampering Cellular Activity of 2, 6-dichloro-4-nitroaniline

NIR-emissive ESIPT active PBI-keto/enol assemblies have been developed for the detection of 2, 6-dichloro-4-nitroaniline (DCN). These assemblies show 'on-on' optical response towards DCN due to combined ESIPT-AIEE phenomenon with a detection limit of 1.65 nM. The potential of PBI-keto/enol assemblies to detect DCN has also been explored in grapes juice/grape residue, and soil for six consecutive days. Further, the biological applications of PBI-keto/enol assemblies to detect DCN in blood serum and to image DCN in live cells and to restrict the DCN induced cell death has been demonstrated in MG-63 cell lines.

Highly sensitive fluorescent sensing platform for imidacloprid and thiamethoxam by aggregation-induced emission of the Zr(Ⅳ) metal - organic framework

A novel luminescent UiO-66-NH₂ (UN) demonstrated great potentials to sense imidacloprid (IM) and thiamethoxam (TH) pesticides with high sensitivity and desirable selectivity. The UN exhibits superb luminescence emission properties, which have been found to enhance the aggregation-induced emission (AIE) of IM and TH. The enhanced AIE of IM and TH on UN has been applied for the sensitive sensing of IM and TH, and a limit of detection (LOD) of IM was estimated to be 5.57 μg/L. LOD of TH was found to be 0.98 μg/L, respectively. Interestingly, the other neonicotinoid pesticides showed a low interference response in recognition of IM and TH. More importantly, we have further demonstrated that the UN are successfully used to sense IM and TH in real samples of fruit juice with a high recovery of 85-116%, and relative standard deviation (RSD) were from 3.42% to 16.07%.

Fabrication of a 2D metal-organic framework (MOF) nanosheet colloidal system and investigation of its fluorescence response to pesticide molecules

Pesticides, as a type of toxic chemicals widely used for a long time, not only pollute the environment but also affect people's health and cause serious harm to the human body, soil and environment. Therefore, it is very necessary to exploit a portable and environmentally friendly method to detect pesticides with high sensitivity. Herein, a new luminescent metal-organic framework ([Zn(TPYBDC)·H₂O]_n, TPYBDC^2- = 4'-(pyridin-4-yl)-[2,2':6',2''-terpyridine]-4,4''-dicarboxylate) with 2D coordination layers has been designed and assembled using 4'-(pyridin-4-yl)-[2,2':6',2''-terpyridine]-4,4''-dicarboxylic acid as the ligand. The as-synthesized Zn-LMOF was exfoliated to ultrathin 2D nanosheets (4-5 nm) to form a luminescence colloidal sensor by destroying the weak interaction between the coordination layers such as H-bonding between the matrix H₂O and the coordination carboxyl oxygen, and the π-π interactions among the interlayer conjugated aromatic rings. Investigation of its recognition and detection ability towards chemical pesticides shows that it can sensitively detect pesticides such as imidacloprid, nitenpyram and dinotefuran via fluorescence quenching effect with very low detection limit (LOD). Using imidacloprid as a typical case, a LOD value of 0.562 μM and recoveries for the simulated agricultural environmental samples in the range of 94-115% suggests that the as-fabricated 2D Zn-MOF nanosheet colloidal sensor (Zn-LMOF probe) is a most promising candidate for sensing chemical pesticides.

Functional Hybrid Micro/Nanoentities Promote Agro-Food Safety Inspection

The rapid development of nanomaterials has provided a good theoretical basis and technical support to solve the problems of food safety inspection. The combination of functionalized composite nanomaterials and well-known detection methods is gradually applied to detect hazardous substances, such as chemical residues and toxins, in agricultural food products. This review concentrates on the latest agro-food safety inspection techniques and methodologies constructed with the assistance of new hybrid micro/nanoentities, such as molecular imprinting polymers integrated with quantum dots (MIPs@QDs), molecular imprinting polymers integrated with upconversion luminescent nanoparticles (MIPs@UCNPs), upconversion luminescent nanoparticles combined with metal-organic frameworks (UCNPs@MOFs), magnetic metal-organic frameworks (MOFs@Fe₃O₄), magnetic covalent-organic frameworks (Fe₃O₄@COFs), covalent-organic frameworks doped with quantum dots (COFs@QDs), nanobody-involved immunoassay for fast inspection, etc. The presented summary and discussion favor a relevant outlook for further integrating various disciplines, like material science, nanotechnology, and analytical methodology, for addressing new challenges that emerge in agro-food research fields.

A single nucleotide polymorphism electrochemical sensor based on DNA-functionalized Cd-MOFs-74 as cascade signal amplification probes

An ultrasensitive electrochemical sensor has been constructed for the detection of single nucleotide polymorphisms (SNPs) based on DNA-functionalized Cd-MOFs-74 as cascade signal amplification probe under enzyme-free conditions. Interestingly, the introduction of an auxiliary probe did not disturb the detection of SNP targets, but could bind more Cd-MOFs-74 signal elements to enhance the different pulse voltammetry electrochemical signal 2~3 times as compared to sensing system without auxiliary probe, which obviously improves the sensitivity of the proposed sensor. Experimental results taking p53 tumor suppressor gene as SNP model demonstrated that the proposed method can be employed to sensitively and selectively detect target p53 gene fragment with a linear response ranging from 0.01 to 30 pmol/L (detection limit of 6.3 fmol/L) under enzyme-free conditions. Utilizing this strategy, the ultrasensitive SNP electrochemical sensor is a promising tool for the determination  of SNPs in biomedicine. Graphical Abstract.