Enhanced Adhesion and Cohesion of Bioinspired Dry/Wet Pressure-Sensitive Adhesives

Mussel Foot Protein-Inspired Adhesive Tapes with Tunable Underwater Adhesion

Instant and strong adhesion to underwater adherends is a big challenge due to the continuous interference of water. Mussel foot protein-bioinspired catechol-based adhesives have garnered great interest in addressing this issue. Herein, a novel self-made catecholic compound with a long aliphatic chain was utilized to prepare thin (∼0.07 mm) and optically transparent (>80%) wet/underwater adhesive tapes by UV-initiated polymerization. Its adhesion activity was water-triggered, fast (<1 min), and strong (adhesion strength to porcine skin: ∼1.99 MPa; interfacial toughness: ∼610 J/m2, burst pressure: ∼1950 mmHg). The effect of the catechol/phenol group and positively charged moiety on the wet/underwater adhesion to abiotic/biotic substrates was investigated. On the wet/underwater adherends, the tape with catechol groups presented much higher interfacial toughness, adhesion strength, and burst pressure than the analogous tape with phenol groups. The tape with both the catechol group and cationic polyelectrolyte chitosan had a more impressive improvement in its adhesion to wet/underwater biological tissues than to abiotic substrates. Therefore, catechol and a positive moiety in the tape would synergistically enhance its wet/underwater adhesion to various substrates, especially to biological tissues. The instant, strong, and noncytotoxic tape may provide applications in underwater adhesion for sealing and wound closure.

Recyclable surgical, consumer, and industrial adhesives of poly(α-lipoic acid)

Polymer adhesives play an important role in many medical, consumer, and industrial products. Polymers of α-lipoic acid (αLA) have the potential to fulfill the need for versatile and environmentally friendly adhesives, but their performance is plagued by spontaneous depolymerization. We report a family of stabilized αLA polymer adhesives that can be tailored for a variety of medical or nonmedical uses and sustainably sourced and recycled in a closed-loop manner. Minor changes in monomer composition afforded a pressure-sensitive adhesive that functions well in dry and wet conditions, as well as a structural adhesive with strength equivalent to that of conventional epoxies. αLA surgical superglue successfully sealed murine amniotic sac ruptures, increasing fetal survival from 0 to 100%.

Mussel-Inspired Polymer-Based Composites for Efficient Thermal Management in Dry and Underwater Environments

To address the escalating power consumption of processors in data centers and the growing emphasis on environmental sustainability, the prospective shift from traditional air-cooling to immersion liquid cooling necessitates multiple functional integrations in polymer-based thermal conductive materials. Here, drawing inspiration from mussels, we showed a copolymer, poly(dimethylsiloxane-co-dopamine methacrylate) (PDMS-DMA), with a variety of reversible molecular interactions and simply combined with liquid metal (EGaIn) can yield a flexible, waterproof, and electrically insulating thermal conductive composite. The obtained PDMS-DMA/EGaIn composites demonstrate a harmonious blend of attributes, including a low modulus (75.8 kPa), high thermal conductivity of 6.9 W m-1 K-1, and rapid room-temperature self-healing capabilities, capable of complete repair within 20 min, even under water. Based on its electrically insulating and water resistance properties, PDMS-DMA/EGaIn emerges as a promising candidate for efficient and stable heat transfer in both air and underwater thermal management. Consequently, this water-resistant polymer-based composite holds significance for application in thermal protective layers for future immersion liquid cooling systems.

Versatile Underwater Pressure Sensitive Adhesive: UV Curing Synthesis and Substrate-Independent Adhesion

The demand for underwater pressure sensitive adhesives (PSAs) is rapidly increasing in fields such as underwater engineering and biomedicine. However, the achievement of underwater adhesion of PSAs remains a challenge because of the hydration layer that hinders the interaction between the adhesive and the substrate. Herein, a new type of underwater PSA was synthesized by the copolymerization of hydrophobic unsaturated poly(1,2-butylene oxide) (UPBO) and hydrophilic itaconic acid monomers using solvent-free ultraviolet curing. The PSA has demonstrated substrate-independent underwater adhesion strengths ranging from 108 to 141 kPa on both hydrophilic (glass, wood, steel) and hydrophobic (PET, PMMA, PTFE) substrates. The underwater adhesion performance of PSA remains stable during 30 adhesion-detachment cycles and incubation in water for 20 days. Notably, PSA shows cytocompatibility, antimicrobial, and degradable properties and can be used for rapid hemostasis of skin wounds. Experimental characterizations confirm that the process of underwater adhesion is achieved by hydrophobic alkyl side chains of the PBO chain segments, which repel water at the adhesive-substrate interface. This study should provide both practical and facile design strategies for multifunctional underwater PSAs that can be used in a variety of applications.

Polarity-Induced Reactive Wetting: Spreading and Retracting Sessile Water Drops

Wetting is typically defined by the relative liquid to solid surface tension/energy, which are composed of polar and nonpolar subcontributions. Current studies often assume that they remain invariant, that is, surfaces are wetting-inert. Complex wetting scenarios, such as adaptive or reactive wetting processes, may involve time-dependent variations in interfacial energies. To maximize differences in energetic states, we employ low-energy perfluoroalkyls integrated with high-energy silica-based polar moieties grown on low-energy polydimethylsiloxane. To this end, we tune the hydrophilic-like wettability on these perfluoroalkyl-silica-polydimethylsiloxane surfaces. Drop contact behaviors range from invariantly hydrophobic at ca. 110° to rapidly spreading at ca. 0° within 5 s. Unintuitively, these vapor-grown surfaces transit toward greater hydrophilicity with increasing perfluoroalkyl deposition. Notably, this occurs as sequential silica-and-perfluoroalkyl deposition also leaves behind embedded polar moieties. We highlight how surfaces having such chemical heterogeneity are inherently wetting-reactive. By creating an abrupt wetting transition composed of reactive and inert domains, we introduce spatial dependency. Drops contacting the transition spread before retracting, occurring over the time scale of a few seconds. This phenomenon contradicts current understanding, exhibiting a uniquely (1) decreasing advancing contact angle and (2) increasing receding contact angle. To explain the behavior, we model such time- and space- dependent reactive wetting using first order kinetics. In doing so, we explore how reactive and recovery mechanisms govern the characteristic time scales of spreading and retracting sessile drops.

Comprehensive Review of Geotechnical Engineering Properties of Recycled Polyethylene Terephthalate Fibers and Strips for Soil Stabilization

The waste management of plastic has become a pressing environmental issue, with polyethylene terephthalate (PET) being one of the major contributors. To address this challenge, the utilization of recycled PET fibers and strips in geotechnical engineering applications for soil stabilization has gained considerable attention. This review aims to provide a comprehensive study of the geotechnical engineering properties of recycled-PET-reinforced soils. The review examines various factors influencing the performance of PET-reinforced soils, including PET percent content, fiber length, and aspect ratio. It evaluates the mechanical properties, like shear strength, compressibility, bearing capacity, hydraulic behavior, and durability of recycled-PET-reinforced soils. The findings reveal PET reinforcement enhances shear strength, reduces settlement, and increases the bearing capacity and stability of the soil. However, it is observed that the incorporation of recycled PET fibers and strips does not lead to a significant impact on the dry density of the soil. Finally, an environmental and cost comparison analysis of recycled PET fibers and strips was conducted. This review serves as a valuable resource for researchers, engineers, and practitioners involved in the field, offering insights into the geotechnical properties of PET-reinforced soils and outlining future research directions to maximize their effectiveness and sustainability.

Review of biomimetic ordered microstructures in advancing synergistic integration of adhesion and microfluidics

Many ordered arrangements are observable in the natural world, serving not only as pleasing aesthetics but also as functional improvements. These structured arrangements streamline cohesion while also facilitating the spontaneous drainage of liquids in microfluidics, resulting in effective separation and signal enhancement. Nevertheless, there is a substantial challenge when handling microstructured chips with microfluidic detection and adhesion. The arrangement of the adhesive interface's microstructure affects the liquid flow in the microfluidic chip, impacting the detection's sensitivity and accuracy. Additionally, the liquid in the microfluidic chip corrodes the adhesive material and structure, reducing the adhesion strength due to the hydration layer between the material and the contact interface. Therefore, this review explores the application of ordered structures in the integration of adhesion and microfluidics. We discussed the standard preparation method, appropriate materials, and the application of ordered structures in biomimetic adhesion and microfluidics. Furthermore, the paper discusses the major challenges in this field and provides opinions on its future developments.

Robust, Sprayable, and Multifunctional Hydrogel Coating through a Polycation Reinforced (PCR) Surface Bridging Strategy

The sprayable hydrogel coatings that can establish robust adhesion onto diverse materials and devices hold enormous potential; however, a significant challenge persists due to monomer hydration, which impedes even coverage during spraying and induces inadequate adhesion post-gelation. Herein, a polycation-reinforced (PCR) surface bridging strategy is presented to achieve tough and sprayable hydrogel coatings onto diverse materials. The polycations offer superior wettability and instant electrostatic interactions with plasma-treated substrates, facilitating an effective spraying application. This PCR-based hydrogel coatings demonstrate tough adhesion performance to inert PTFE and silicone, including remarkable shear strength (161 ± 49 kPa for PTFE), interfacial toughness (198 ± 27 J m-2 for PTFE), and notable tolerance to cyclic tension (10 000 cycles, 200% strain, silicone). Meanwhile, this method can be applied to various hydrogel formulations, offering diverse functionalities, including underwater adhesion, lubrication, and drug delivery. Furthermore, the PCR concept enables the conformal construction of durable hydrogel coatings onto sophisticated medical devices like cardiovascular stents. Given its simplicity and adaptability, this approach paves an avenue for incorporating hydrogels onto solid surfaces and potentially promotes untapped applications.

Selectively Positioned Catechol Moiety Supports Ultrashort Self-Assembling Peptide Hydrogel Adhesion for Coral Restoration

Coral reef survival is threatened globally. One way to restore this delicate ecosystem is to enhance coral growth by the controlled propagation of coral fragments. To be sustainable, this technique requires the use of biocompatible underwater adhesives. Hydrogels based on rationally designed ultrashort self-assembling peptides (USP) are of great interest for various biological and environmental applications, due to their biocompatibility and tunable mechanical properties. Implementing superior adhesion properties to the USP hydrogel compounds is crucial in both water and high ionic strength solutions and is relevant in medical and marine environmental applications such as coral regeneration. Some marine animals secrete large quantities of the aminoacids dopa and lysine to enhance their adhesion to wet surfaces. Therefore, the addition of catechol moieties to the USP sequence containing lysine (IIZK) should improve the adhesive properties of USP hydrogels. However, it is challenging to place the catechol moiety (Do) within the USP sequence at an optimal position without compromising the hydrogel self-assembly process and mechanical properties. Here, we demonstrate that, among three USP hydrogels, DoIIZK is the least adhesive and that the adhesiveness of the IIZDoK hydrogel is compromised by its poor mechanical properties. The best adhesion outcome was achieved using the IIZKDo hydrogel, the only one to show equally sound adhesive and mechanical properties. A mechanistic understanding of this outcome is presented here. This property was confirmed by the successful gluing of coral fragments by means of IIZKDo hydrogel that are still thriving after more than three years since the deployment. The validated biocompatibility of this underwater hydrogel glue suggests that it could be advantageously implemented for other applications, such as surgical interventions.

Controllable adhesion behavior in underwater environments

Microstructure adhesive pads can effectively manipulate objects in underwater environments. Current adhesive pads can achieve adhesion and separation with rigid substrates underwater; however, challenges remain in the control of adhesion and detachment of flexible materials. Additionally, underwater object manipulation necessitates considerable pre-pressure and is sensitive to water temperature fluctuations, potentially causing object damage and complicating adhesion and detachment processes. Thus, we present a novel, controllable adhesive pad inspired by the functional attributes of microwedge adhesive pads, combined with a mussel-inspired copolymer (MAPMC). In the context of underwater applications for flexible materials, the use of a microstructure adhesion pad with microwedge characteristics (MAPMCs) is a proficient approach to adhesion and detachment operations. This innovative method relies on the precise manipulation of the microwedge structure's collapse and recovery during its operation, which serves as the foundation for its efficacy in such environments. MAPMCs exhibit self-recovering elasticity, water flow interaction, and tunable underwater adhesion and detachment. Numerical simulations elucidate the synergistic effects of MAPMCs, highlighting the advantages of the microwedge structure for controllable, non-damaging adhesion and separation processes. The integration of MAPMCs into a gripping mechanism allows for the handling of diverse objects in underwater environments. Furthermore, by merging MAPMCs and a gripper within a linked system, our approach enables automatic, non-damaging adhesion, manipulation, and release of a soft jellyfish model. The experimental results indicate the potential applicability of MACMPs in underwater operations.

Synthetic Pressure Sensitive Adhesives for Biomedical Applications

Pressure sensitive adhesives are components of everyday products found in homes, offices, industries, and hospitals. Serving the general purpose of fissure repair and object fixation, pressure sensitive adhesives indiscriminately bind surfaces, as long as contact pressure is administered at application. With that being said, the chemical and material properties of the adhesive formulation define the strength of a pressure sensitive adhesive to a particular surface. Given our increased understanding of the viscoelastic material requirements as well as the intermolecular interactions at the binding interface required for functional adhesives, pressure sensitive adhesives are now being explored for greater use. New polymer formulations impart functionality and degradability for both internal and external applications. This review highlights the structure-property relationships between polymer architecture and pressure sensitive adhesion, specifically for medicine. We discuss the rational, molecular-level design of synthetic polymers for durable, removable, and biocompatible adhesion to wet surfaces like tissue. Finally, we examine prevalent challenges in biomedical wound closure and the new, innovative strategies being employed to address them. We conclude by summarizing the progress of current research, identifying additional clinical opportunities, and discussing future prospects.

Mechanistic insights into the effect of drug content on adhesive properties of transdermal patch containing lidocaine

This study aims to shed light on the relationship between drug content and adhesive properties in drug-in-adhesive transdermal patch, and to elucidate molecular mechanisms from the perspective of polymer chain mobility. Lidocaine was selected as model drug. Two acrylate pressure sensitive adhesives (PSAs) with different polymer chain mobility were synthesized. Tack adhesion, shear adhesion and peel adhesion of PSAs with 0, 5%, 10%, 15% and 20% w/w lidocaine contents were tested. Polymer chain mobility was determined by rheology and modulated differential scanning calorimetry experiments. Drug-PSA interaction was analyzed by FT-IR. The effect of drug content on free volume of PSA were determined by positron annihilation lifetime spectroscopy and molecular dynamics simulation. It was found that the polymer chain mobility of PSA was increased with increasing drug content. Due to the variation of polymer chain mobility, tack adhesion increased, and shear adhesion decreased. It was proved that interactions between polymer chains were destroyed by drug-PSA interactions, free volume between polymer chains was expanded, resulting in the increase of polymer chain mobility. We can conclude that the effect of drug content on polymer chain mobility should be considered, when designing a transdermal drug delivery system with controlled and satisfactory adhesion.

Enhanced Adhesion of Electrospun Polycaprolactone Nanofibers to Plasma-Modified Polypropylene Fabric

Excellent adhesion of electrospun nanofiber (NF) to textile support is crucial for a broad range of their bioapplications, e.g., wound dressing development. We compared the effect of several low- and atmospheric pressure plasma modifications on the adhesion between two parts of composite—polycaprolactone (PCL) nanofibrous mat (functional part) and polypropylene (PP) spunbond fabric (support). The support fabrics were modified before electrospinning by low-pressure plasma oxygen treatment or amine plasma polymer thin film or treated by atmospheric pressure plasma slit jet (PSJ) in argon or argon/nitrogen. The adhesion was evaluated by tensile test and loop test adapted for thin NF mat measurement and the trends obtained by both tests largely agreed. Although all modifications improved the adhesion significantly (at least twice for PSJ treatments), low-pressure oxygen treatment showed to be the most effective as it strengthened adhesion by a factor of six. The adhesion improvement was ascribed to the synergic effect of high treatment homogeneity with the right ratio of surface functional groups and sufficient wettability. The low-pressure modified fabric also stayed long-term hydrophilic (ten months), even though surfaces usually return to a non-wettable state (hydrophobic recovery). In contrast to XPS, highly surface-sensitive water contact angle measurement proved suitable for monitoring subtle surface changes.

Study of Applying Naturally Occurring Mineral Materials for Silicone Pressure-Sensitive Adhesives

Silicones are commonly used as adhesives when high-quality materials are required due to harsh environmental conditions such as high temperature, humidity, etc. To ensure high resistance to environmental conditions, including high temperatures, modifications of silicone adhesives are made using fillers. The characteristics of a modified silicone-based pressure-sensitive adhesive with filler are the focus of this work. Functionalized palygorskite was prepared in this investigation by grafting 3-mercaptopropyltrimethoxysilane (MPTMS) onto palygorskite (palygorskite-MPTMS). The palygorskite was functionalized using MPTMS under dried conditions. FTIR/ATR spectroscopy, thermogravimetric analysis, and elemental analysis were all used to characterize the obtained palygorskite-MPTMS. MPTMS loading onto palygorskite was also proposed. The results demonstrated that palygorskite's initial calcination favors the grafting of functional groups on its surface. New self-adhesive tapes based on palygorskite-modified silicone resins have been obtained. This functionalized filler allows for the improvement of the compatibility of palygorskite with specific resins for application in heat-resistant silicone pressure-sensitive adhesives. The new self-adhesive materials showed increased thermal resistance while maintaining good self-adhesive properties.

Injectable Intrinsic Photothermal Hydrogel Bioadhesive with On-Demand Removability for Wound Closure and MRSA-Infected Wound Healing

Photothermal hydrogel adhesives have yielded promising results for wound closure and infected wound treatment in recent years. However, photothermal hydrogel bioadhesives with on-demand removability without additional nanomaterials-based photothermal agents have rarely been reported in the literature. In this work, an injectable intrinsic photothermal hydrogel bioadhesive with an on-demand removal trait is developed through dynamic cross-linking of gelatin (Gel), tannic acid (TA) quinone, and borax for closing skin incisions and accelerating methicillin-resistant Staphylococcus aureus (MRSA) infected wound healing. The TA quinone containing polyphenol and quinone groups with multifunctional adhesiveness and intrinsic photothermal performance confer the hydrogel adhesive with near-infrared (NIR) responsive antibacterial activity. The cross-linking of pH-sensitive boronic ester (polyphenol-B) and Schiff base bonds endow the hydrogel with great self-healing capacity and on-demand removability. Moreover, the hydrogel possesses good biocompatibility, injectability, and hemostasis. The in vivo experiment in a rat cutaneous incision model and full-thickness MRSA-infected wound model indicate that the smart hydrogel can close wounds efficiently and treat infected ones, demonstrating its superiority in noninvasive treatment of cutaneous incisions and enhancing infected full-thickness wound healing.

Povidone-iodine enhanced underwater tape

Realizing rapid and stable bonding under humid conditions has remained a challenge in adhesion science and wound dressing. In this study, polyacrylate-based underwater tape with water-enhanced adhesion and antimicrobial performance was designed and synthesized. Good underwater adhesion performance is achieved through the reasonable selection of comonomers, among which 4-hydroxybutyl acrylate (4-HBA) and isobornyl acrylate (IBOA) provide rich hydrogen bond interactions and a rigid side chain stable structure, respectively. The former effectively increases the interface strength between the tape and the substrate, while the latter ensures that the tape can maintain a good cohesion strength under water. Besides, povidone iodine (PVP-I₂) as a reinforcing filler and germicidal factor endows the tape with tunable mechanical properties and impressive antimicrobial abilities. This work provides a facile approach to prepare a wet adhesive for medical and industrial fields which can be used as wound dressing and underwater adhesive materials.

Influence of Nanoclay on the Thermo-Mechanical Properties of Silicone Pressure-Sensitive Adhesives

This research was carried on newly obtained innovative materials-self-adhesive one-sided tapes based on silicone pressure-sensitive adhesives. In order to obtain tapes, the stable adhesive composition was subjected to physical modification by incorporating into it various amounts of selected silicon fillers. The produced pressure-sensitive adhesives were tested for viscosity and thermogravimetric analysis, as well as the manufactured tapes; i.e., peel adhesion, tack, cohesion at room and elevated temperature, SAFT test (shear adhesive failure temperature), and shrinkage. The prepared self-adhesive tapes retained their self-adhesive properties at a level close to the initial level while increasing the thermal resistance by 70-75 °C, reaching the level of 220-225 °C. The new self-adhesive materials have application potential and can be used as a material for special applications in the field of electrical engineering and heavy industry.

Bridging wounds: tissue adhesives' essential mechanisms, synthesis and characterization, bioinspired adhesives and future perspectives

Bioadhesives act as a bridge in wound closure by forming an effective interface to protect against liquid and gas leakage and aid the stoppage of bleeding. To their credit, tissue adhesives have made an indelible impact on almost all wound-related surgeries. Their unique properties include minimal damage to tissues, low chance of infection, ease of use and short wound-closure time. In contrast, classic closures, like suturing and stapling, exhibit potential additional complications with long operation times and undesirable inflammatory responses. Although tremendous progress has been made in the development of tissue adhesives, they are not yet ideal. Therefore, highlighting and summarizing existing adhesive designs and synthesis, and comparing the different products will contribute to future development. This review first provides a summary of current commercial traditional tissue adhesives. Then, based on adhesion interaction mechanisms, the tissue adhesives are categorized into three main types: adhesive patches that bind molecularly with tissue, tissue-stitching adhesives based on pre-polymer or precursor solutions, and bioinspired or biomimetic tissue adhesives. Their specific adhesion mechanisms, properties and related applications are discussed. The adhesion mechanisms of commercial traditional adhesives as well as their limitations and shortcomings are also reviewed. Finally, we also discuss the future perspectives of tissue adhesives.

Fe(III)-coordinated N-[tris(hydroxymethyl)methyl]acrylamide-modified acrylic pressure-sensitive adhesives with enhanced adhesion and cohesion for efficient transdermal application

Pressure-sensitive adhesives are critical to the product's safety, efficacy, and quality in transdermal drug delivery systems. However, many defects of transdermal patches (e.g., insufficient adhesion, patch displacement, and "dark ring" phenomenon) remain. Herein, the N-[tris(hydroxymethyl)methyl]acrylamide (NAT)-modified acrylic pressure-sensitive adhesive coordinated with Fe(III) (AA-NAT/Fe³⁺) was creatively proposed. Results demonstrated that the adhesiveness and cohesiveness of the optimized AA-NAT/Fe³⁺ were higher by 1.8- and 9.7-fold, respectively, than those of commercially available DURO-TAK® 87-4098 due to the hydrogen bonding interaction of NAT-skin interface and coordination of NAT-Fe³⁺. Moreover, compared with that of DURO-TAK® 87-4098, the adhesion time of AA-NAT/Fe³⁺ on the human forearm was remarkably prolonged, and no "dark ring" phenomenon was observed for AA-NAT/Fe³⁺ after removal. After clonidine (CLO) was loaded into AA-NAT/Fe³⁺, controlled drug release and a drug transdermal behavior were endowed for CLO@AA-NAT/Fe³⁺in vitro and in vivo. AA-NAT/Fe³⁺ still maintained superiority in adhesion and cohesion properties after CLO loading. These observations would contribute to the development of pressure-sensitive adhesives with outstanding adhesion and cohesion for transdermal patches. STATEMENT OF SIGNIFICANCE: This N-[tris(hydroxymethyl)methyl]acrylamide-modified acrylic pressure-sensitive adhesive coordinated with Fe(III) has enhanced adhesion and cohesion properties, which provide a simple but effective strategy to solve the problems (e.g., insufficient adhesion, patch displacement, and "dark ring" phenomenon) in existing transdermal patches.

Electrically switched underwater capillary adhesion

Developing underwater adhesives that can rapidly and reversibly switch the adhesion in wet conditions is important in various industrial and biomedical applications. Despite extensive progresses, the manifestation of underwater adhesion with rapid reversibility remains a big challenge. Here, we report a simple strategy that achieves strong underwater adhesion between two surfaces as well as rapid and reversible detachment in on-demand manner. Our approach leverages on the design of patterned hybrid wettability on surfaces that selectively creates a spatially confined integral air shell to preserve the water bridge in underwater environment. The overall adhesion strength can be multiplied by introducing multiple air shells and rapidly broken by disturbing the integrity of the protective air shell in response to the applied voltage on two surfaces. Our design can be constructed on the flexible substrate with hybrid wettability, which can be applied to non-conductive substrates and adapted to more complicated morphologies, extending the choice of underlying materials.

Antifreezing and Nondrying Sensors of Ionic Hydrogels with a Double-Layer Structure for Highly Sensitive Motion Monitoring

Freezing and dehydration together with interfacial failure are capable of causing the functional reduction of hydrogels for sensing applications. Herein, we develop a multifunctional bilayer that consists of a mussel-inspired adhesive layer and a functionally ionic layer that is composed of sodium p-styrene sulfonate (SSS) and an ionic liquid of [BMIM]Cl. The adhesive layer enables the strong adhesion of the bilayer to the surface of the skin. The introduction of ionic elements of SSS-[BMIM]Cl not only provides the bilayer with sensing adaptability in a wide temperature range of -25 to 75 °C, but also endows it with elastic, stretchable, self-healing, and conductive features. These mechanical properties are utilized to assemble a wearable sensor that has unprecedented sensitivity and reusability in monitoring human motions, including stretching, pulsing, frowning, and speaking. It is thus expected that the concept in this work would provide a promising route to design soft sensing devices that can work in a wide temperature range.

Dynamic reversible adhesives based on crosslinking network via Schiff base and Michael addition

It is of practical interest to obtain polymers with complex material properties in a simplified synthetic manner for a broader range of practical applications. In this work, we constructed a dynamic reversible adhesive based on branched polyamine (PA) and p-formylphenyl acrylate (FPA) by simultaneously performing Michael addition reaction and Schiff base reaction. Branched polyamines provide a large number of amino groups as reaction sites that can react with both carbon-carbon double bonds and aldehyde groups. This enables the branched polymeric adhesive system to have a large number of Schiff base bonds within it, an important property of Schiff base bonds is that they are dynamically reversible. This allows us to prepare adhesives with hyperbranched crosslinking networks and recycling properties, and we have verified that FPA-PA adhesives do not exhibit significant fatigue after multiple recycling through the gluing-destruction-gluing process. The resulting FPA-PA adhesives produce tough bonding on multi-substrates such as steel, aluminum, glass, PVC, PTFE, birch and moso bamboo, which exhibited by lap shear strength of 2.4 MPa, 1.7 MPa, 1.4 MPa, 1.3 MPa, 0.4 MPa, 1.6 MPa, and 1.8 MPa, respectively. The feasibility of the synthesis idea of simultaneous Michael addition reaction and Schiff base reaction was demonstrated, as well as the excellent performance and great application potential of FPA-PA adhesives to be recyclable on multi-substrates.

Systematic Approach to Mimic Phenolic Natural Polymers for Biofabrication

In nature, phenolic biopolymers are utilized as functional tools and molecular crosslinkers to control the mechanical properties of biomaterials. Of particular interest are phenolic proteins/polysaccharides from living organisms, which are rich in catechol and/or gallol groups. Their strong underwater adhesion is attributed to the representative phenolic molecule, catechol, which stimulates intermolecular and intramolecular crosslinking induced by oxidative polymerization. Significant efforts have been made to understand the underlying chemistries, and researchers have developed functional biomaterials by mimicking the systems. Owing to their unique biocompatibility and ability to transform their mechanical properties, phenolic polymers have revolutionized biotechnologies. In this review, we highlight the bottom-up approaches for mimicking polyphenolic materials in nature and recent advances in related biomedical applications. We expect that this review will contribute to the rational design and synthesis of polyphenolic functional biomaterials and facilitate the production of related applications.

Molecular Engineering Super-Robust Dry/Wet Adhesive with Strong Interface Bonding and Excellent Mechanical Tolerance

Despite the fact that synthetic adhesives have achieved great progress, achieving robust dry/wet adhesion under harsh operating environments is still challenging. Herein, inspired from the extraordinary adhesion mechanism of nature mussel protein adhesive, the balanced design concept of co-adhesion and interfacial adhesion is proposed to prepare one kind of novel copolymer adhesive of [poly(dopamine methacrylamide-co-methoxethyl acrylate-co-adamantane-1-carboxylic acid 2-(2-methyl-acryloyloxy)-ethyl ester)] [p(DMA-co-MEA-co-AD)], named as super-robust adhesive (SRAD). The SRAD exhibits ultra-high interface bonding strengths in air (∼7.66 MPa) and underwater (∼2.78 MPa) against an iron substrate. Especially, a greatly tough and stable adhesion strength (∼2.11 MPa) can be achieved after immersing the bonded sample in water for half a year. Furthermore, the SRAD demonstrates surprising wet bonding robustness/tolerance even encountering harsh conditions such as fluid shearing, dynamic loading, and cyclic mechanical fretting. The great advantages of SRAD, such as strong interface bonding, stable wet adhesion underwater, and good mechanical tolerance, makes it demonstrate huge application potential in engineering sealants and underwater adhesion.

Surface Force Measurements of Mussel-Inspired Pressure-Sensitive Adhesives

Translating fundamental studies of marine mussel adhesion into practical mussel-inspired wet adhesives remains an important technological challenge. To adhere, mussels secrete adhesive proteins rich in the catecholic amino acid 3,4-dihydroxyphenylalanine (Dopa) and positively charged lysine. Consequently, numerous synthetic adhesives incorporating catecholic and cationic functionalities have been designed. However, despite widespread research, uncertainties remain about the optimal design of synthetic mussel-inspired adhesives. Here, we present a study of the adhesion of mussel-inspired pressure-sensitive adhesives. We explore the effects of catechol content, molecular architecture, and solvent quality on pressure-sensitive adhesive (PSA) adhesion and cohesion measured in a surface forces apparatus. Our findings demonstrate that the influence of catechol content depends on the choice of solvent and that adhesive performance is dictated by film composition rather than molecular architecture. Our results also highlight the importance of electrostatic and hydrophobic interactions for adhesion and cohesion in aqueous environments. Together, our findings contribute to an improved understanding of the interplay between materials chemistry, environmental conditions, and adhesive performance to facilitate the design of bioinspired wet adhesives.

Bio-based and bio-inspired adhesives from animals and plants for biomedical applications

With the "many-headed" slime mold Physarum polycelphalum having been voted the unicellular organism of the year 2021 by the German Society of Protozoology, we are reminded that a large part of nature's huge variety of life forms is easily overlooked - both by the general public and researchers alike. Indeed, whereas several animals such as mussels or spiders have already inspired many scientists to create novel materials with glue-like properties, there is much more to discover in the flora and fauna. Here, we provide an overview of naturally occurring slimy substances with adhesive properties and categorize them in terms of the main chemical motifs that convey their stickiness, i.e., carbohydrate-, protein-, and glycoprotein-based biological glues. Furthermore, we highlight selected recent developments in the area of material design and functionalization that aim at making use of such biological compounds for novel applications in medicine - either by conjugating adhesive motifs found in nature to biological or synthetic macromolecules or by synthetically creating (multi-)functional materials, which combine adhesive properties with additional, problem-specific (and sometimes tunable) features.

Adhesion Optimization between Incompatible Polymers through Interfacial Engineering

Additive manufacturing technologies such as fused filament fabrication (FFF) open many possibilities in terms of product functionality, including the possibility to integrate a sensor in FFF parts to perform structural health monitoring. In this context, embedding fiber Bragg grating (FBG) sensors into 3D-printed polymeric structures for strain or temperature measurements has attracted increasing attention in recent years. Indeed, offering structural health monitoring functionality can optimize the maintenance cost and increase security compared with conventional materials. However, the transmission of strain and temperature between the polymeric matrix and the FBG polymer jacket requires optimal bonding between them. In this work, the two polymers of interest are polyimide (PI) and poly(lactic acid) (PLA) for the FBG jacket and printed polymer, respectively. The current study investigates the influence of different surface treatment methods on the adhesion between a PI film and a plate of PLA, with PLA and PI being incompatible polymers. The adhesion promotion applied to the PI surface relies on cleaning, plasma activation, roughness modification, or the use of adhesive nanocoating. Bilayer samples of PI-PLA are processed by welding PLA against the treated PI by heating, whereas the adhesion between PI and PLA is measured by peel testing. It is observed that the highest adhesion between PI and PLA is achieved by a combination of mechanical abrasion increasing roughness and the use of polydopamine as an adhesive. This finding is discussed based on a synergetic effect between mechanical interlocking and chemical interaction between the two counterfaces.

Design principles for creating synthetic underwater adhesives

Water and adhesives have a conflicting relationship as demonstrated by the failure of most man-made adhesives in underwater environments. However, living creatures routinely adhere to substrates underwater. For example, sandcastle worms create protective reefs underwater by secreting a cocktail of protein glue that binds mineral particles together, and mussels attach themselves to rocks near tide-swept sea shores using byssal threads formed from their extracellular secretions. Over the past few decades, the physicochemical examination of biological underwater adhesives has begun to decipher the mysteries behind underwater adhesion. These naturally occurring adhesives have inspired the creation of several synthetic materials that can stick underwater - a task that was once thought to be "impossible". This review provides a comprehensive overview of the progress in the science of underwater adhesion over the past few decades. In this review, we introduce the basic thermodynamics processes and kinetic parameters involved in adhesion. Second, we describe the challenges brought by water when adhering underwater. Third, we explore the adhesive mechanisms showcased by mussels and sandcastle worms to overcome the challenges brought by water. We then present a detailed review of synthetic underwater adhesives that have been reported to date. Finally, we discuss some potential applications of underwater adhesives and the current challenges in the field by using a tandem analysis of the reported chemical structures and their adhesive strength. This review is aimed to inspire and facilitate the design of novel synthetic underwater adhesives, that will, in turn expand our understanding of the physical and chemical parameters that influence underwater adhesion.

Calcium Peroxide Nanoparticles-Embedded Coatings on Anti-Inflammatory TiO2 Nanotubes for Bacteria Elimination and Inflammatory Environment Amelioration

Implant-associated bacterial infections significantly impair the integration between titanium and soft tissues. Traditional antibacterial modifications of titanium implants are able to eliminate bacteria, but the resulting pro-inflammatory reactions are usually ignored, which still poses potential risks to human bodies. Here, a dual drug-loading system on titanium has been developed via the adhesion of a catechol motif-modified methacrylated gelatin hydrogel onto TiO₂ nanotubes. Then synthesized CaO₂ nanoparticles (NPs) are embedded into the hydrogel, and interleukin-4 (IL-4) is loaded into the nanotubes to achieve both antibacterial and anti-inflammatory properties. The dual drug-loading system can eliminate Staphylococcus aureus (S. aureus) rapidly, attributed to the H₂ O₂ release from CaO₂ NPs. The potential cytotoxicity of CaO₂ NPs is also remarkably reduced after being embedded into the hydrogel. More importantly, with the gradual release of IL-4, the dual drug-loading system is capable of modulating pro-inflammatory reactions by inducing M2 phenotype polarization of macrophages. In a subcutaneous infection model, the S. aureus contamination is effectively resolved after 2 days, and the resulting pro-inflammatory reactions are also inhibited after 7 days. Finally, the damaged tissue is significantly recovered. Taken together, the dual drug-loading system exhibits great therapeutic potential in effectively killing pathogens and inhibiting the resulting pro-inflammatory reactions.

Bioinspired Underwater Adhesives

Underwater adhesives are in high demand in both commercial and industrial sectors. Compared with adhesives used in dry (air) environments, adhesives used for wet or submerged surfaces in aqueous environments have specific challenges in development and performance. In this review, focus is on adhesives demonstrating macroscopic adhesion to wet/underwater substrates. The current strategies are first introduced for different types of underwater adhesives, and then an overview is provided of the development and performance of underwater adhesives based on different mechanisms and strategies. Finally, the possible research directions and prospects of underwater adhesives are discussed.

Pressure-Sensitive Adhesive with Enhanced and Phototunable Underwater Adhesion

Pressure-sensitive adhesives (PSAs) are extensively used in diverse applications such as semiconductor manufacturing, labeling, and healthcare because of their quick and viscoelasticity-driven physical adhesion to dry surfaces. However, most of the existing PSAs normally fail to maintain or even establish adhesion under harsh conditions, particularly underwater, due to the lack of robust chemical functionalities for chemistry-based adhesion. Meanwhile, these PSAs are incapable of altering the adhesion in response to external stimuli, limiting their employment in applications requiring dynamic adhesion. Here, we develop a chemically functionalized PSA (f-PSA) with enhanced and phototunable underwater adhesion by incorporating an underwater adhesion enhancer (i.e., mussel-inspired catechol) and a photoresponsive functionality (i.e., anthracene) into a standard acrylic PSA matrix. The synergistic coupling of viscoelasticity-driven physical adhesion originating from the matrix with catechol-enabled chemical adhesion secures sufficient interfacial molecular interactions and leads to enhanced underwater adhesion. The efficient dimerization of anthracene via light-triggered cycloaddition facilely mediates the viscoelastic property of f-PSA, rendering the phototunable adhesion. We envision that this f-PSA can open up more opportunities for applications such as underwater manipulation, transfer printing, and medical adhesives.

A Universal and Reversible Wet Adhesive via Straightforward Aqueous Self-Assembly of Polyethylenimine and Polyoxometalate

The excellent adhesion of mussels under wet conditions has inspired the development of numerous catechol-based wet adhesives. Nevertheless, the performance of catechol-based wet adhesive suffers from the sensitivity toward temperature, pH, or oxidation stimuli. Therefore, it is of great significance to develop non-catechol-based wet adhesives to fully recapitulate nature's dynamic function. Herein, a novel type of non-catechol-based wet adhesive is reported, which is readily formed by self-assembly of commercially available branched polyethylenimine and phosphotungstic acid in aqueous solution through the combination of electrostatic interaction and hydrogen bonding. This wet adhesive shows reversible, tunable, and strong adhesion on diverse substrates and further exhibits high efficacy in promoting biological wound healing. During the healing of the wound, the as-prepared wet adhesive also possesses inherent antimicrobial properties, thus avoiding inflammations and infections due to microorganism accumulation.

How latex film formation and adhesion at the nanoscale correlate to performance of pressure sensitive adhesives with cellulose nanocrystals

Emulsion polymerized latex-based pressure-sensitive adhesives (PSAs) are more environmentally benign because they are synthesized in water but often underperform compared to their solution polymerized counterparts. Studies have shown a simultaneous improvement in the tack, and peel and shear strength of various acrylic PSAs upon the addition of cellulose nanocrystals (CNCs). This work uses atomic force microscopy (AFM) to examine the role of CNCs in (i) the coalescence of hydrophobic 2-ethyl hexyl acrylate/n-butyl acrylate/methyl methacrylate (EHA/BA/MMA) latex films and (ii) as adhesion modifiers over multiple length scales. Thin films with varying solids content and CNC loading were prepared by spin coating. AFM revealed that CNCs lowered the solids content threshold for latex particle coalescence during film formation. This improved the cohesive strength of the films, which was directly reflected in the increased shear strength of the EHA/BA/MMA PSAs with increasing CNC loading. Colloidal probe AFM indicated that the nano-adhesion of thicker continuous latex films increased with CNC loading when measured over small contact areas where the effect of surface roughness was negligible. Conversely, the beneficial effects of the CNCs on macroscopic PSA tack and peel strength were outweighed by the effects of increased surface roughness with increasing CNC loading over larger surface areas. This highlights that CNCs can improve both cohesive and adhesive PSA properties; however, the effects are most pronounced when the CNCs interact favourably with the latex polymer and are uniformly dispersed throughout the adhesive film. This article is part of the theme issue 'Bio-derived and bioinspired sustainable advanced materials for emerging technologies (part 1)'.

Robust Antiwater and Anti-oil-fouling Double-Sided Tape Enabled by SiO2 Reinforcement and a Liquefied Surface

Realizing simultaneous antiwater and anti-oil-fouling adhesion is extremely challenging owing to the solvated overlayer on the surface of substrates. Herein, we develop a supertough polyacrylate-based tape bearing SiO₂ as a reinforcing filler and a solvent to liquefy the surface. The SiO₂ reinforcement enhances the cohesion strength, while the liquefied surface not only expels the solvated overlayer but also improves the interfacial wettability and interaction. This material design imparts the double-sided tape with admirable antiwater and anti-oil-fouling adhesion performance, which far exceeds that of commercial tapes, as well as high transparency and long-term stability. In addition, we carry out an in-depth study on the adhesive mechanism for the tape and clarify the role of the solvent and the interaction between SiO₂ and a polymer matrix. This work provides a novel strategy for designing antiwater and anti-oil-fouling adhesives with wide applications in various fields such as leakage repair, antiseep, underwater adhesion, building materials, and biological adhesives.

Biomimetic Microstructured Hydrogels with Thermal-Triggered Switchable Underwater Adhesion and Stable Antiswelling Property

The design of hydrogels with switchable adhesion and stable antiswelling property in a wet environment has remained a challenge. Here, we report a biomimetic hydrogel that can adhere and detach on-demand on various material surfaces, which is realized by thermal-triggered switchable shape transformation on hexagonal micropillar patterned hydrogels. The hydrogels are cross-linked by two cross-linkers of poly(ethylene glycol) dimethacrylate and 2-ureidoethyl methacrylate, which guarantee the strong mechanical property and stable antiswelling property in a wet environment. The hydrogels can maintain stable water content in solutions with variable pH, temperature, and salt concentration, and the change in volume does not exceed 2%. In addition, due to the dynamical hydrogen bonds and dipole-dipole interaction in the hydrogels, the hydrogels exhibit a thermal-triggered shape-memory effect. The hydrogel can recover shape more than 80% in 15 s. Furthermore, inspired by the surface structure of tree-frog footpads, the hexagonal micropillar patterned hydrogels exhibit improved underwater adhesion strength. The underwater adhesion strength of hexagonal micropillar patterned hydrogels is seven times more than that of flat hydrogels. Based on the shape-memory effect of hydrogels, the adhesion strength can be altered by a thermal stimulus. The adhesion strength of the microstructures recovered from the hydrogel surface decreased to 15.4% of the initial adhesion strength. The switchable underwater adhesion of hydrogels can be applied in the fields of transfer printing, medical adhesives, mobile robots, etc.

Light-Activated Adhesion and Debonding of Underwater Pressure-Sensitive Adhesives

Pressure-sensitive adhesives (PSAs) such as sticky notes and labels are a ubiquitous part of modern society. PSAs with a wide range of peel adhesion strength are designed by tailoring the bulk and surface properties of the adhesive. However, designing an adhesive with strong initial adhesion but showing an on-demand decrease in adhesion has been an enduring challenge in the design of PSAs. To address this challenge, we designed alkoxyphenacyl-based polyurethane (APPU) PSAs that show a photoactivated increase and decrease in peel strength. With increasing time of light exposure, the failure mode of our PSAs shifted from cohesive to adhesive failure, providing residue-free removal with up to 83% decrease in peel strength. The APPU-PSAs also adhere to substrates submerged underwater and show a similar photoinduced decrease in adhesion strength.

Bioinspired pressure-sensitive adhesive: evaluation of the effect of dopamine methacrylamide comonomer as a general property modifier using molecular dynamics simulation

The use of catechol-containing comonomers as a general property enhancer to achieve unique properties has received particular attention for designing bioinspired polymeric materials. In this study, molecular dynamics simulation was used to investigate the role of dopamine methacrylamide (DMA) and N-phenethyl methacrylamide (PMA) comonomers in chain conformation and their effects on the mechanical properties and adhesion of poly(n-butyl acrylate-co-acrylic acid) copolymer. Addition of 4% by weight of DMA comonomer in the terpolymer structure reduces the gyration radius of the poly(n-butyl acrylate-co-acrylic acid) copolymer. This reduction is due to the formation of intramolecular hydrogen bond interactions. A further increase in the DMA up to 12.2% by weight increases the radius of gyration by 5%. The effect of PMA on the gyration radius of the poly(n-butyl acrylate-co-acrylic acid) copolymer is more extensive, compared to DMA. While DMA enhances both van der Waals and electrostatic components of the cohesive energy density through increasing π–π interactions and hydrogen bond formations, PMA only improves the van der Waals component. Assessment of mechanical properties revealed that the addition of DMA comonomer resulted in a transition from brittle to tough behavior in poly(n-butyl acrylate-co-acrylic acid) pressure-sensitive adhesive. Ductility index improvement by DMA is higher than that by PMA. DMA comonomers accumulate on the silica surface resulting in the terpolymer chains approaching the dry silica surface from the hydroxyl groups of the catechol. Accumulation of DMA only enhances the cohesive energy and does not improve the adhesive energy.

The use of catechol-containing comonomers as a general property enhancer to achieve unique properties has received particular attention for designing bioinspired polymeric materials.

Bio-Based Hotmelt Adhesives with Well-Adhesion in Water

We suggest a simple idea of bio-based adhesives with strong adhesion even under water. The adhesives simply prepared via polycondensation of 3,4-dihydroxyhydrocinnamic acid (DHHCA) and lactic acid (LA) in one pot polymerization. Poly(DHHCA-co-LA) has a hyperbranched structure and demonstrated strong dry and wet adhesion strength on diverse material surfaces. We found that their adhesion strength depended on the concentration of DHHCA. Poly(DHHCA-co-LA) with the lowest concentration of DHHCA showed the highest adhesion strength in water with a value of 2.7 MPa between glasses, while with the highest concentration of DHHCA it exhibited the highest dry adhesion strength with a value of 3.5 MPa, which was comparable to commercial instant super glue. Compared to underwater glues reported previously, our adhesives were able to spread rapidly under water with a low viscosity and worked strongly. Poly(DHHCA-co-LA) also showed long-term stability and kept wet adhesion strength of 2.2 MPa after steeping in water for 1 month at room temperature (initial strength was 2.4 MPa). In this paper, Poly(DHHCA-co-LA) with strong dry and wet adhesion properties and long-term stability was demonstrated for various kinds of applications, especially for wet conditions.

A Modular Strategy for Functional Pressure Sensitive Adhesives

A modular approach to synthesizing functional pressure sensitive adhesives (PSAs) was introduced, wherein a modifiable acrylic PSA copolymer was synthesized by copolymerizing common PSA monomers with 6 mol % glycidyl methacrylate, allowing for subsequent functional group modification via the pendant epoxide functionality. This postmodification technique has the advantage of allowing the installation of a variety of functional groups relevant to adhesion, without variation of molecular weight. Because comparisons of cohesive and adhesive performance of candidate PSAs can be complicated by molecular weight differences, this strategy simplifies direct comparisons of the effects of functional groups on performance. As a proof of concept, a mussel-inspired catecholic PSA was synthesized by postreaction of the epoxide scaffold polymer with a thiol-modified catechol, allowing the effect of catechol on underlying structure-property relationships to be determined without variation in molecular weight. The mechanical performance of catecholic PSA was compared to relevant control PSAs by using industry-standard 180° peel and static shear tests, revealing an increase in peel strength achieved through catechol modification. Moreover, we observed an unexpected enhancement in PSA cohesive strength attributed to oxidation of catechol, which cannot be attributed to differences in molecular weight, a common source of changes in PSA cohesive strength.

Tough Underwater Super-tape Composed of Semi-interpenetrating Polymer Networks with a Water-Repelling Liquid Surface

Despite recent advances in bioinspired underwater adhesives, achieving tough, fast, and stable adhesion in aqueous environments is still challenging. Here, an underwater super-tape with semi-interpenetrating polymer networks (SIPNs) and a water-repelling liquid surface is synthesized. In the SIPN, the linear chains easily diffuse to adapt to the adherends, and the cross-linked chains provide the super-tape with high dimensional stability. Meanwhile, both the linear and cross-linked chains bear many catechol groups, which can not only vigorously interact with the adherends but also form numerous hydrogen bonds serving as sacrificial bonds in the SIPN. Thus, the super-tape shows both high interfacial adhesion and cohesive energy. Moreover, the super-tape is covered with a water-repelling liquid surface by spraying it with traces of a hydrophobic solvent. It is demonstrated that the hydrophobic solvent absorbed on the surface of the super-tape can remove water between the tape and adherends, enabling their intimate contact to form a strong interaction. As such, the super-tape shows excellent instant adhesion property under water, and the adhesive strength and toughness increase with time and reach their maximum values at around 5 h. The maximum debonding energy of the super-tape reaches 3933 J m^-2, which is much higher than those of existing double-sided tapes.

Nanocomposite adhesive hydrogels: from design to application

Hydrogels may exhibit strong adhesion upon embedding nanoparticles into them forming strong/weak bonds (via the multiple physical or chemical interactions).