One-Step Curable, Covalently Immobilized Coating for Clinically Relevant Surfaces That Can Kill Bacteria, Fungi, and Influenza Virus

Activating Thermoplastic Polyurethane Surfaces with Poly(ethylene glycol)-Based Recombinant Human α-Defensin 5 Monolayers for Antibiofilm Activity

Addressing multidrug-resistant microbial infections linked to implantable biomedical devices is an urgent need. In recent years, there has been an active exploration of different surface coatings to prevent and combat drug-resistant microbes. In this research, we present a facile chemical modification of thermoplastic polyurethane (TPU) surfaces with poly(ethylene glycol)-based recombinant human α-defensin 5 (HD5) protein with antimicrobial activity. TPU is one of the most relevant materials used for medical devices with good mechanical properties but also good chemical resistance, which makes it difficult to modify. The chemical modification of TPU surfaces is achieved via a three-step procedure based on (i) TPU activation using hexamethylene diisocyanate (HDI); (ii) interfacial reaction with poly(ethylene glycol) (PEG) derivatives; and finally, (iii) a facile click reaction between the PEG-maleimide terminated assembled monolayers on the TPU and the cysteine (-thiol) termination of the recently designed recombinant human α-defensin 5 (HD5) protein. The obtained PEG based HD5 assembled monolayers on TPU were characterized using a surface science multitechnique approach including scanning electron microscopy, atomic force microscopy, contact angle, and X-ray photoelectron spectroscopy. The modified TPU surfaces with the HD5 protein derivative exhibit broad-spectrum antibacterial properties reducing biofilm formation against Pseudomonas aeruginosa (Gram-negative), methicillin-resistant Staphylococcus aureus (MRSA) (Gram-positive) and methicillin-resistant Staphylococcus epidermidis (MRSE) (Gram-positive). These findings underscore the substantial potential of protein-modified TPU surfaces for applications in combating bacterial infections associated with implantable materials and devices.

Antimicrobial nanocomposite coatings for rapid intervention against catheter-associated urinary tract infections

Catheter-associated urinary tract infections (CAUTIs) pose a significant challenge in hospital settings. Current solutions available on the market involve incorporating antimicrobials and antiseptics into catheters. However, challenges such as uncontrolled release leading to undesirable toxicity, as well as the prevalence of antimicrobial resistance reduce the effectiveness of these solutions. Additionally, conventional antibiotics fail to effectively eradicate entrenched bacteria and metabolically suppressed bacteria present in the biofilm, necessitating the exploration of alternative strategies. Here, we introduce a novel polymer-nanocomposite coating that imparts rapid antimicrobial and anti-biofilm properties to coated urinary catheters. We have coated silicone-based urinary catheters with an organo-soluble antimicrobial polymer nanocomposite (APN), containing hydrophobic quaternized polyethyleneimine and zinc oxide nanoparticles, in a single step coating process. The coated surfaces exhibited rapid eradication of drug-resistant bacteria within 10-15 min, including E. coli, K. pneumoniae, MRSA, and S. epidermidis, as well as drug-resistant C. albicans fungi. APN coated catheters exhibited potent bactericidal activity against uropathogenic strains of E. coli, even when incubated in human urine. Furthermore, the stability of the coating and retention of antimicrobial activity was validated even after multiple washes. More importantly, this coating deterred biofilm formation on the catheter surface, and displayed rapid inactivation of metabolically repressed stationary phase and persister cells. The ability of the coated surfaces to disrupt bacterial membranes and induce the generation of intracellular reactive oxygen species (ROS) was assessed through different techniques, such as electron microscopy imaging, flow cytometry as well as fluorescence spectroscopy and microscopy. The surface coatings were found to be biocompatible in an in vivo mice model. Our simple one-step coating approach for catheters holds significant potential owing to its ability to tackle multidrug resistant bacteria and fungi, and the challenge of biofilm formation. This work brings us one step closer to enhancing patient care and safety in hospitals.

Antimicrobial Efficacy of a Vegetable Oil Plasticizer in PVC Matrices

The growing prevalence of bacterial and viral infections, highlighted by the recent COVID-19 pandemic, urgently calls for new antimicrobial strategies. To this end, we have synthesized and characterized a novel fatty acid epoxy-ester plasticizer for polymers, named GDE. GDE is not only sustainable and user-friendly but also demonstrates superior plasticizing properties, while its epoxy components improve the heat stability of PVC-based matrices. A key feature of GDE is its ability to confer antimicrobial properties to surfaces. Indeed, upon contact, this material can effectively kill enveloped viruses, such as herpes simplex virus type 1 (HSV-1) and the β-coronavirus prototype HCoV-OC43, but it is ineffective against nonenveloped viruses like human adenovirus (HAdV). Further analysis using transmission electron microscopy (TEM) on HSV-1 virions exposed to GDE showed significant structural damage, indicating that GDE can interfere with the viral envelope, potentially causing leakage. Moreover, GDE demonstrates antibacterial activity, albeit to a lesser extent, against notorious pathogens such as Staphylococcus aureus and Escherichia coli. Overall, this newly developed plasticizer shows significant potential as an antimicrobial agent suitable for use in both community and healthcare settings to curb the spread of infections caused by microorganisms contaminating physical surfaces.

Multifunctional Suture Coating for Combating Surgical Site Infections and Mitigating Associated Complications

Despite advancements in preventive measures and hospital protocols, surgical site infections (SSIs) remain a significant concern following surgeries. Sutures, commonly used for wound closure, can serve as a platform for microbial adherence and contamination, leading to extensive debridement and recurrent antibiotic therapy. The emergence of drug resistance and the formation of biofilms on sutures have further complicated the management of SSIs. Drug-eluting sutures incorporating biocides like triclosan have limitations due to uncontrolled release and associated toxicity. Therefore, there is a need for alternative approaches to impart antimicrobial properties to sutures. In this study, we present a one-step covalent cross-linking method to coat surgical sutures with an antimicrobial small molecule, quaternary benzophenone-based antimicrobial (QSM). Additionally, the sutures are dip-coated with ibuprofen, a nonsteroidal anti-inflammatory drug with analgesic properties. The coated sutures maintained their morphological and tensile properties after in vivo implantation. The antimicrobial coating demonstrated efficacy against a broad-spectrum pathogens, including drug-resistant bacteria and fungi. The optimized formulation retained its biodegradability in vivo. Furthermore, the coated sutures exhibited ∼3 log reduction in methicillin-resistant Staphylococcus aureus (MRSA) burden in a subcutaneous implantation mouse model. Overall, this multifunctional coating provides antimicrobial properties to surgical sutures while preserving their mechanical integrity and biodegradability. These coated sutures have the potential to address the challenge of SSIs and contribute to improved surgical outcomes.

Novel Antibacterial Materials and Coatings-A Perspective by the Editors

The fight between humans and bacteria has escalated to a new level.

Engineering Photo-Crosslinked Antimicrobial Coating to Tackle Catheter-Associated Infections In Vivo

Microbial colonization on urinary and intravascular catheter surfaces results in steeply rising cases of catheter-associated infections as well as blood stream infections. Currently marketed efforts include impregnation and loading of antimicrobials and antiseptics that leach out into the local environment and inactivate microbes. However, they suffer from uncontrolled release, induction of resistance, and undesired toxicity. Here, in this manuscript, we have developed a photocurable, covalent coating on catheters using quaternary benzophenone-based amide (QSM-1). The coating was found to be active against drug-resistant bacteria and fungi. The coating inactivated stationary and persister cells of superbug MRSA and inhibited the formation of biofilms with retained activity against broad-spectrum bacteria when challenged in realistic urinary conditions. The coating was seen to be biocompatible in vitro and in vivo. Remarkably, the coated catheters showed reduced fouling and >99.9% reduction in bacterial burden when implanted in vivo in a mice model of subcutaneous implantation. We conceive the possibility of application of QSM-1-coated catheters in the healthcare settings to tackle the notorious catheter-associated nosocomial infections.

Preparation and Functionalization of Polymers with Antibacterial Properties-Review of the Recent Developments

The presence of antibiotic-resistant bacteria in our environment is a matter of growing concern. Consumption of contaminated drinking water or contaminated fruit or vegetables can provoke ailments and even diseases, mainly in the digestive system. In this work, we present the latest data on the ability to remove bacteria from potable water and wastewater. The article discusses the mechanisms of the antibacterial activity of polymers, consisting of the electrostatic interaction between bacterial cells and the surface of natural and synthetic polymers functionalized with metal cations (polydopamine modified with silver nanoparticles, starch modified with quaternary ammonium or halogenated benzene). The synergistic effect of polymers (N-alkylaminated chitosan, silver doped polyoxometalate, modified poly(aspartic acid)) with antibiotics has also been described, allowing for precise targeting of drugs to infected cells as a preventive measure against the excessive spread of antibiotics, leading to drug resistance among bacteria. Cationic polymers, polymers obtained from essential oils (EOs), or natural polymers modified with organic acids are promising materials in the removal of harmful bacteria. Antimicrobial polymers are successfully used as biocides due to their acceptable toxicity, low production costs, chemical stability, and high adsorption capacity thanks to multi-point attachment to microorganisms. New achievements in the field of polymer surface modification in order to impart antimicrobial properties were summarized.

Preliminary Study of the Bactericide Properties of Biodegradable Polymers (PLA) with Metal Additives for 3D Printing Applications

Plastic is a highly used material in various sectors. Due to its plentiful availability in the environment, microorganism surface contamination is a risk. The aim of this work is to achieve bactericidal capacity in plastics that reduces the microorganism’s colonization risk and, consequently, reduces the chances of having an infection with E. coli and Listeria monocytogenes bacteria. Using polylactic acid (PLA) as the polymeric matrix, mixtures in concentrations of metal additive of ions of silver (Ag) R148 and S254 in 1% and 2% have been studied and manufactured. The materials are developed on an industrial scale through a process that proceeds as follows: (I) a mixture of polymer and additive in a double-screw compounder to obtain the compound in different concentrations, (II) the manufacture of filaments with a single-screw extruder, (III) 3D printing parts. Therefore, materials are evaluated in the form of powder, pellets and printed pieces to ensure their antibacterial effectiveness throughout the manufacturing process. The results of the research show antibacterial effectiveness for E. coli and Listeria monocytogenes of metal additives and polymeric compounds for all manufacturing phases on an industrial scale, with the effectiveness for additive R148 predominating at a concentration of 2%, demonstrating its microbial efficacy on surfaces with potential application in medicine.

Bio-inspired synthesis of amino acids modified sulfated cellulose nanofibrils into multivalent viral inhibitors via the Mannich reaction

Virus cross-infection via surfaces poses a serious threat to public health. Inspired by natural sulfated polysaccharides and antiviral peptides, we prepared multivalent virus blocking nanomaterials by introducing amino acids to sulfated cellulose nanofibrils (SCNFs) via the Mannich reaction. The antiviral activity of the resulting amino acid-modified sulfated nanocellulose was significantly improved. Specifically, 1 h treatment with arginine modified SCNFs at a concentration of 0.1 g/mL led to a complete inactivation of the phage-X174 (reduction by more than three orders of magnitude). Atomic force microscope showed that amino acid-modified sulfated nanofibrils can bind phage-X174 to form linear clusters, thus preventing the virus from infecting the host. When we coated wrapping paper and the inside of a face-mask with our amino acid-modified SCNFs, phage-X174 was completely deactivated on the coated surfaces, demonstrating the potential of our approach for use in the packaging and personal protective equipment industries. This work provides an environmentally friendly and cost-efficient approach to fabricating multivalent nanomaterials for antiviral applications.

Nano-antivirals: A comprehensive review

Nanoparticles can be used as inhibitory agents against various microorganisms, including bacteria, algae, archaea, fungi, and a huge class of viruses. The mechanism of action includes inhibiting the function of the cell membrane/stopping the synthesis of the cell membrane, disturbing the transduction of energy, producing toxic reactive oxygen species (ROS), and inhibiting or reducing RNA and DNA production. Various nanomaterials, including different metallic, silicon, and carbon-based nanomaterials and nanoarchitectures, have been successfully used against different viruses. Recent research strongly agrees that these nanoarchitecture-based virucidal materials (nano-antivirals) have shown activity in the solid state. Therefore, they are very useful in the development of several products, such as fabric and high-touch surfaces. This review thoroughly and critically identifies recently developed nano-antivirals and their products, nano-antiviral deposition methods on various substrates, and possible mechanisms of action. By considering the commercial viability of nano-antivirals, recommendations are made to develop scalable and sustainable nano-antiviral products with contact-killing properties.

Surface antimicrobial functionalization with polymers: fabrication, mechanisms and applications

Undesirable adhesion of microbes such as bacteria, fungi and viruses onto surfaces affects many industries such as marine, food, textile, and healthcare. In particular in healthcare and food packaging, the effects of unwanted microbial contamination can be life-threatening. With the current global COVID-19 pandemic, interest in the development of surfaces with superior anti-viral and anti-bacterial activities has multiplied. Polymers carrying anti-microbial properties are extensively used to functionalize material surfaces to inactivate infection-causing and biocide-resistant microbes including COVID-19. This review aims to introduce the fabrication of polymer-based antimicrobial surfaces through physical and chemical modifications, followed by the discussion of the inactivation mechanisms of conventional biocidal agents and new-generation antimicrobial macromolecules in polymer-modified antimicrobial surfaces. The advanced applications of polymer-based antimicrobial surfaces on personal protective equipment against COVID-19, food packaging materials, biomedical devices, marine vessels and textiles are also summarized to express the research trend in academia and industry.

Rapid and Highly Sensitive Method for Evaluating Surface Coatings against an Enveloped RNA Virus

The COVID-19 pandemic has increased public health vigilance worldwide. The coronavirus (SARS-CoV-2) can spread via aerosols, and droplet-borne viruses remain viable on nonliving surfaces for long duration. Hence, effective antiviral coatings are highly useful in eliminating viral persistence on nonliving surfaces. Although innovative antiviral coatings have been designed, conventional procedures for antiviral assays are generally laborious, time-consuming, and have a high limit of detection. In the present study, we report a rapid and highly sensitive method for evaluating antiviral coatings by measuring the luciferase activity derived from recombinant Sendai virus (SeV). The physicochemical characteristics of SeV, which has a single-stranded RNA genome encapsulated within a lipid envelope, allow us to exploit it as an indicator of the physicochemical potential of coating materials against enveloped RNA viruses in general. We demonstrate that SeV-based assay systems allow for the rapid and quantitative evaluation of the surface coatings composed of iodine solubilized in polyvinyl acetate. Additionally, we have investigated the effect of mucins, the dominant protein component of saliva, on the antiviral activity of surface coatings. The presence of mucins in the SeV suspension considerably rescues luciferase activity at the viral-surface interface, presumably due to mucin-mediated viral protection. Our findings provide insights into a procedure capable of the rapid evaluation and optimization of surface coatings, and suggest an important role of the mucin in the valid evaluation of antiviral agents.

Permanent, Antimicrobial Coating to Rapidly Kill and Prevent Transmission of Bacteria, Fungi, Influenza, and SARS-CoV-2

Microbial adhesion and contamination on shared surfaces can lead to life-threatening infections with serious impacts on public health, economy, and clinical practices. The traditional use of chemical disinfectants for sanitization of surfaces, however, comes with its share of health risks, such as hazardous effects on the eyes, skin, and respiratory tract, carcinogenicity, as well as environmental toxicity. To address this, we have developed a nonleaching quaternary small molecule (QSM)-based sprayable coating which can be fabricated on a wide range of surfaces such as nylon, polyethylene, surgical mask, paper, acrylate, and rubber in a one-step, photocuring technique. This contact-active coating killed pathogenic bacteria and fungi including drug-resistant strains of Staphylococcus aureus and Candida albicans within 15-30 min of contact. QSM coatings withstood multiple washes, highlighting their durability. Interestingly, the coated surfaces exhibited rapid killing of pathogens, leading to the prevention of their transmission upon contact. The coating showed membrane disruption of bacterial cells in fluorescence and electron microscopic investigations. Along with bacteria and fungi, QSM-coated surfaces also showed the complete killing of high loads of influenza (H1N1) and SARS-CoV-2 viruses within 30 min of exposure. To our knowledge, this is the first report of a coating for multipurpose materials applied in high-touch public places, hospital equipment, and clinical consumables, rapidly killing drug-resistant bacteria, fungi, influenza virus, and SARS-CoV-2.

Easy Fabrication of a Polymeric Transparent Sheet to Combat Microbial Infection

Surges in infectious diseases and their transmission in households and commercial and healthcare settings have increased the use of polymeric materials as protective covers. Despite ongoing efforts, conventional polymeric materials still pose the threat of surface-associated transmission of pathogens due to the fact that they lack antimicrobial properties. Here, we have developed an easy-to-fabricate polymeric sheet [quaternary polymeric transparent sheet (QPTS)] that shows an excellent antimicrobial property and is also transparent in nature, increasing its practical applications in a wide range of surfaces. The sheet was fabricated by combining cationic amphiphilic water-soluble polyethylenimine derivative (QPEINH-C₆) and poly(vinyl alcohol) (PVA). The optimum composition (QPTS-3) exhibited a complete reduction of bacterial and fungal infection (∼3-4 log reduction) within 15 min. QPTS-3 also exhibited activity against antibiotic-insusceptible metabolically inactive bacterial cells. The sheet prevented the growth of MRSA biofilm even after 72 h of incubation, which was confirmed through electron microscopy on the QPTS sheet. Most importantly, ∼99.9% of the influenza viral load was reduced completely within 30 min of exposure of the sheet. Apart from the antimicrobial property, the sheet successfully retained its transparency (∼88%) and maintained a significant mechanical strength (∼15 N), highlighting its potential applications in commercial and healthcare settings.

Temperature-triggered fluorocopolymer aggregate coating switching from antibacterial to antifouling and superhydrophobic hemostasis

The multifunction antibacterial hemostatic materials can reduce blood loss, infection and wound complications, which probably decrease morbidity and health care costs. However, the contradictory relationship between antibacterial ability and biocompatibility, and the unnecessary blood loss restricts the practical application of hydrophilic cationic antibacterial hemostatic materials. Herein, a multifunctional temperature-triggered antibacterial hemostatic fluorocopolymer aggregate coating was developed. After self-assembly and quaternization process, the quaternized poly(N,N-dimethylaminoethylmethacrylate)-b-poly(1H,1H,2H,2H-heptadecafluorodecyl acrylate) block copolymers (PDMA-b-PFOEMA) aggregate coating consisting of fluoropolymer and quaternary ammonium salt were built. The synergistic effect on fluorinated block with low surface energy and quaternary ammonium salt block with bactericide activity severs the way of initial bacterial attachment and proliferation, while the migration of fluorinated block greatly promotes the biocompatibility and anti-adhesion performance in response to the switch from room temperature to physiological temperature. Furthermore, the fluorocopolymer aggregate coating with hydrophobic properties possessed the property of rapid coagulation, low blood loss, minor secondary bleeding and least bacteria infiltration. The multifunctional temperature-triggered fluorocopolymer aggregate coating with antifouling, antibacterial and hemostatic properties may have a great potential in the biomedical application.

Advances in Nanomaterial-Based Platforms to Combat COVID-19: Diagnostics, Preventions, Therapeutics, and Vaccine Developments

The COVID-19 pandemic caused by the SARS-CoV-2, a ribonucleic acid (RNA) virus that emerged less than two years ago but has caused nearly 6.1 million deaths to date. Recently developed variants of the SARS-CoV-2 virus have been shown to be more potent and expanded at a faster rate. Until now, there is no specific and effective treatment for SARS-CoV-2 in terms of reliable and sustainable recovery. Precaution, prevention, and vaccinations are the only ways to keep the pandemic situation under control. Medical and scientific professionals are now focusing on the repurposing of previous technology and trying to develop more fruitful methodologies to detect the presence of viruses, treat the patients, precautionary items, and vaccine developments. Nanomedicine or nanobased platforms can play a crucial role in these fronts. Researchers are working on many effective approaches by nanosized particles to combat SARS-CoV-2. The role of a nanobased platform to combat SARS-CoV-2 is extremely diverse (i.e., mark to personal protective suit, rapid diagnostic tool to targeted treatment, and vaccine developments). Although there are many theoretical possibilities of a nanobased platform to combat SARS-CoV-2, until now there is an inadequate number of research targeting SARS-CoV-2 to explore such scenarios. This unique mini-review aims to compile and elaborate on the recent advances of nanobased approaches from prevention, diagnostics, treatment to vaccine developments against SARS-CoV-2, and associated challenges.

An easy-to-use antimicrobial hydrogel effectively kills bacteria, fungi, and influenza virus

Various drug resistant pathogens such as bacteria, fungi and viruses enter a host through different routes, which can lead to health-related problems and even fatalities. Propagation of these infectious microbes majorly occurs through the mucosal openings or upon topical contact. To curb their transmission or to cure infections associated with these pathogens, herein we describe the development of an antimicrobial hydrogel, based on a water soluble quaternary lipophilic polyethyleneimine derivative (QPEINH-C₆). The cationic polymer QPEINH-C₆ exhibited antibacterial activity against drug-resistant Gram-positive bacteria (MIC = 10-62 μg mL^-1) and Gram-negative bacteria (MIC = 117-123 μg mL^-1). The derivative showed killing of human pathogenic fungi (MIC = 58-67 μg mL^-1), including their clinical isolates. The rapid bactericidal and fungicidal nature were confirmed from the fast inactivation kinetics of bacterial cells (methicillin resistant S. aureus and vancomycin resistant S. aureus) within 3-6 hours and C. albicans within 1 h with ∼5-6 log reduction in the microbial burden. This antibacterial and antifungal cationic polymer was then used to construct an antimicrobial shear-thinning hydrogel (Bacfuvir), through non-covalent crosslinking with biocompatible gellan and polyvinyl alcohol (PVA). This hydrogel displayed ∼5-7 log reduction of numerous multidrug-resistant bacteria and their stationary phase cells which are insusceptible to conventional antibiotics. In addition, >99.9 % viable bacterial burden was reduced from preformed biofilm matrices of drug-resistant bacteria. Alongside, fluconazole-resistant C. albicans strains were killed completely within 15-60 min upon exposure to Bacfuvir gel. Most importantly, MRSA and C. albicans cells were reduced (3-4 log) in polymicrobial biofilms after hydrogel treatment. The hydrogel exhibited 99.9 % reduction of influenza viruses in a rapid manner. Due to the biocompatibility of Bacfuvir gel on topical application in a murine model and easy administration owing to its shear-thinning behaviour, this hydrogel can markedly contribute to mitigating drug-resistant bacterial, fungal and viral infections in healthcare settings.

Polymeric Biomaterials for Prevention and Therapeutic Intervention of Microbial Infections

The escalating emergence of multidrug-resistant (MDR) pathogens and their ability to colonize into biofilms on a multitude of surfaces have struck global health as a nightmare. The stagnation in the development of antibiotics and the deterioration of clinical pipelines have incited an invigorating search for smart and innovative alternatives in the scientific community. Further, a steep rise in the usage of biomedical devices and implants has resulted in an accelerated occurrence of infections. Toward the goal of mitigation of the aforementioned challenges, antimicrobial polymers have stood out as an astounding option. In this perspective, we highlight our contribution to the field of polymeric biomaterials for tackling antimicrobial resistance (AMR) and infections. Polymers inspired from antimicrobial peptides (AMPs) have been utilized as therapeutic interventions to curb MDR infections and also to rejuvenate obsolete antibiotics. Further, cationic polymers have been used to impart antimicrobial properties to different biomedical surfaces. These cationic polymer-coated surfaces can inactivate pathogens upon contact as well as prevent their biofilm formation. In addition, antimicrobial hydrogels, which are prepared from either inherently antimicrobial polymers or biocide-loaded polymeric hydrogel matrices, have also been engineered. With a brief overview of the progress in the field, detailed elaboration of the polymeric biomaterials for prevention and therapeutic intervention of microbial infections developed by our group is presented. Finally, the challenges in the field of antimicrobial polymers with discussion on the proceedings of polymeric research to alleviate these challenges are discussed.

Network polymers incorporating lipid-bilayer disrupting polymers: towards antiviral functionality

Polymer based solid-state materials capable of disrupting lipid-bilayers are developed. The materials are mechanically robust and capable of outperforming a 10% small-molecule surfactant and modify filter materials.

Layer-by-layer construction of zwitterionic/biguanide polymers on silicone rubber as antifouling/bactericidal coating

Biofilm formation on biomedical devices is the major cause of devices associated infections. Traditional antibiotics treatments on biofilm associated infections is increasing the risk of multidrug resistance. Thus, developing antibiotics-free...

Quaternized Polydopamine Coatings for Anchoring Molecularly Dispersed Broad-Spectrum Antimicrobial Silver Salts

Because of the broad-spectrum antimicrobial efficacy, silver-based coatings have emerged as the popular choice to apply over frequently touched surfaces for mitigating the spread of nosocomial infections. Despite the advancements through various coating strategies, clustering of the active component remains a bottleneck in achieving the molecular-scale dispersion of silver. To circumvent this, the current study takes advantage of the recent findings of quaternary ammonium moieties forming molecular complexes with silver salts that differ from the simple adduct between the individual components. Here we demonstrate the quaternization of oxidatively cross-linked polydopamine coatings over magnetite nanoparticles to anchor ionic silver at a molecular-scale dispersion. The silver-derivatized materials exhibit remarkable broad-spectrum antimicrobial properties against representative microbes like E. coli, S. aureus, and A. niger. Also, the study reveals the materials' antibiofilm efficacy (∼80-90%) against both bacteria. Further recyclability studies have proven the sustained bactericidal properties up to five cycles. The surface derivatization strategy has then been extended to cover glass slips that have also shown the retention of the bactericidal properties even after wiping 20 times with artificial sweat. The biocompatibility of the materials has been ascertained with treated water against the mouse fibroblast and human embryonic kidney cell lines. The current study offers insights in developing coatings with molecular-scale dispersion of ionic silver to achieve broad-spectrum antimicrobial properties in an atom-economical and sustainable manner.

Natural Benzo/Acetophenones as Leads for New Synthetic Acetophenone Hybrids Containing a 1,2,3-Triazole Ring as Potential Antifouling Agents

Marine biofouling is a natural process that represents major economic, environmental, and health concerns. Some booster biocides have been used in biofouling control, however, they were found to accumulate in environmental compartments, showing negative effects on marine organisms. Therefore, it is urgent to develop new eco-friendly alternatives. Phenyl ketones, such as benzophenones and acetophenones, have been described as modulators of several biological activities, including antifouling activity (AF). In this work, acetophenones were combined with other chemical substrates through a 1,2,3-triazole ring, a strategy commonly used in Medicinal Chemistry. In our approach, a library of 14 new acetophenone–triazole hybrids was obtained through the copper(I)-catalyzed alkyne-azide cycloaddition “click” reaction. All of the synthesized compounds were evaluated against the settlement of a representative macrofouling species, Mytilus galloprovincialis, as well as on biofilm-forming marine microorganisms, including bacteria and fungi. The growth of the microalgae Navicula sp. was also evaluated after exposure to the most promising compounds. While compounds 6a, 7a, and 9a caused significant inhibition of the settlement of mussel larvae, compounds 3b, 4b, and 7b were able to inhibit Roseobacter litoralis bacterial biofilm growth. Interestingly, acetophenone 7a displayed activity against both mussel larvae and the microalgae Navicula sp., suggesting a complementary action of this compound against macro- and microfouling species. The most potent compounds (6a, 7a, and 9a) also showed to be less toxic to the non-target species Artemia salina than the biocide Econea^®. Regarding both AF potency and ecotoxicity activity evaluation, acetophenones 7a and 9a were put forward in this work as promising eco-friendly AF agents.

Towards antiviral polymer composites to combat COVID-19 transmission

Polymer matrix composite materials have the capacity to aid the indirect transmission of viral diseases. Published research shows that respiratory viruses, including severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2 or COVID-19), can attach to polymer substrata as a result of being contacted by airborne droplets resulting from infected people sneezing or coughing in close proximity. Polymer matrix composites are used to produce a wide range of products that are "high-touch" surfaces, such as sporting goods, laptop computers and household fittings, and these surfaces can be readily contaminated by pathogens. This article reviews published research on the retention of SARS-CoV-2 and other virus types on plastics. The factors controlling the viral retention time on plastic surfaces are examined and the implications for viral retention on polymer composite materials are discussed. Potential strategies that can be used to impart antiviral properties to polymer composite surfaces are evaluated. These strategies include modification of the surface composition with biocidal agents (e.g., antiviral polymers and nanoparticles) and surface nanotexturing. The potential application of these surface modification strategies in the creation of antiviral polymer composite surfaces is discussed, which opens up an exciting new field of research for composite materials.

Chemical design principles of next-generation antiviral surface coatings

The ongoing coronavirus disease 2019 (COVID-19) pandemic has accelerated efforts to develop high-performance antiviral surface coatings while highlighting the need to build a strong mechanistic understanding of the chemical design principles that underpin antiviral surface coatings. Herein, we critically summarize the latest efforts to develop antiviral surface coatings that exhibit virus-inactivating functions through disrupting lipid envelopes or protein capsids. Particular attention is focused on how cutting-edge advances in material science are being applied to engineer antiviral surface coatings with tailored molecular-level properties to inhibit membrane-enveloped and non-enveloped viruses. Key topics covered include surfaces functionalized with organic and inorganic compounds and nanoparticles to inhibit viruses, and self-cleaning surfaces that incorporate photocatalysts and triplet photosensitizers. Application examples to stop COVID-19 are also introduced and demonstrate how the integration of chemical design principles and advanced material fabrication strategies are leading to next-generation surface coatings that can help thwart viral pandemics and other infectious disease threats.

Molecular and micro-scale heterogeneities in Raman modes of a relaxing polymer glass

We have used Raman spectroscopy to study relaxation dynamics at two different length scales, molecular level and micro-scale in order to probe the presence of cooperative rearranging regions in a polymer glass. Response to slow thermal cycles and fast quench through the glass transition temperature (T_g) is analyzed for film and unprocessed forms of polyvinyl acetate (PVAc). In PVAc film, enhanced disorder and molecular mobility lead to peak broadening by about a factor of 10 compared to unprocessed PVAc. Thermal cycles (10 K min^-1) produce hysteresis in integrated Raman peak intensity (loop areaAINTI).AINTIvalues of film are two orders of magnitude more than unprocessed, indicating more configurational mosaics with higher interfacial energy dissipations. Ageing after 60 K min^-1quench manifests as heterogeneous molecular dynamics of film Raman modes with significant peak-width variations, differentiating high mobility and low mobility modes. Two-dimensional mapping of film Raman modes after quench reveal micro-scale clusters of average size ≈250 molecules having fractal boundaries with fractal dimensiond_f= 1.5, resemblingd_fof percolation clusters below percolation threshold. During thermal cycling and relaxation after a quench, cooperative segmental dynamics with large correlations between skeletal C-C stretch and side branch modes is observed. The observations are analyzed in the context of the random first order transition theory of glasses, which attributes heterogeneous relaxations in glasses to the presence of clusters of variable configurational states.

High-performance antiviral nano-systems as a shield to inhibit viral infections: SARS-CoV-2 as a model case study

Despite significant accomplishments in developing efficient rapid sensing systems and nano-therapeutics of higher efficacy, the recent coronavirus disease (COVID-19) pandemic is not under control successfully because the severe acute respiratory syndrome virus (SARS-CoV-2, original and mutated) transmits easily from human to -human and causes life-threatening respiratory disorders. Thus, it has become crucial to avoid this transmission through precautions and keep premises hygienic using high-performance anti-viral nanomaterials to trap and eradicate SARS-CoV-2. Such an antiviral nano-system has successfully demonstrated useful significant contribution in COVID-19 pandemic/endemic management effectively. However, their projection with potential sustainable prospects still requires considerable attention and efforts. With this aim, the presented review highlights various severe life-threatening viral infections and the role of multi-functional anti-viral nanostructures with manipulative properties investigated as an efficient precative shielding agent against viral infection progression. The salient features of such various nanostructures, antiviral mechanisms, and high impact multi-dimensional roles are systematically discussed in this review. Additionally, the challenges associated with the projection of alternative approaches also support the demand and significance of this selected scientific topic. The outcomes of this review will certainly be useful to motivate scholars of various expertise who are planning future research in the field of investigating sustainable and affordable high-performance nano-systems of desired antiviral performance to manage not only COVID-19 infection but other targeted viral infections as well.

Recent breakthroughs of antibacterial and antiviral protective polymeric materials during COVID-19 pandemic and after pandemic: Coating, packaging, and textile applications

The global epidemic owing to COVID-19 has generated awareness to ensuring best practices for avoiding the microorganism spread. Indeed, because of the increase in infections caused by bacteria and viruses such as SARS-CoV-2, the global demand for antimicrobial materials is growing. New technologies by using polymeric systems are of great interest. Virus transmission by contaminated surfaces leads to the spread of infectious diseases, so antimicrobial coatings are significant in this regard. Moreover, antimicrobial food packaging is beneficial to prevent the spread of microorganisms during food processing and transportation. Furthermore, antimicrobial textiles show an effective role. We aim to provide a review of prepared antimicrobial polymeric materials for use in coating, food packaging, and textile during the COVID-19 pandemic and after pandemic.

Effective and biocompatible antibacterial surfaces via facile synthesis and surface modification of peptide polymers

It is an urgent need to tackle drug-resistance microbial infections that are associated with implantable biomedical devices. Host defense peptide-mimicking polymers have been actively explored in recent years to fight against drug-resistant microbes. Our recent report on lithium hexamethyldisilazide-initiated superfast polymerization on amino acid N-carboxyanhydrides enables the quick synthesis of host defense peptide-mimicking peptide polymers. Here we reported a facile and cost-effective thermoplastic polyurethane (TPU) surface modification of peptide polymer (DLL: BLG = 90 : 10) using plasma surface activation and substitution reaction between thiol and bromide groups. The peptide polymer-modified TPU surfaces exhibited board-spectrum antibacterial property as well as effective contact-killing ability in vitro. Furthermore, the peptide polymer-modified TPU surfaces showed excellent biocompatibility, displaying no hemolysis and cytotoxicity. In vivo study using methicillin-resistant Staphylococcus aureus (MRSA) for subcutaneous implantation infectious model showed that peptide polymer-modified TPU surfaces revealed obvious suppression of infection and great histocompatibility, compared to bare TPU surfaces. We further explored the antimicrobial mechanism of the peptide polymer-modified TPU surfaces, which revealed a surface contact-killing mechanism by disrupting the bacterial membrane. These results demonstrated great potential of the peptide-modified TPU surfaces for practical application to combat bacterial infections that are associated with implantable materials and devices.

•

A convenient surface modification of peptide polymer 90 : 10 DLL : BLG to enable material surfaces antibacterial properties.

•

The modified thermoplastic polyurethane (TPU) surfaces show board-spectrum antibacterial performance and excellent biocompatibility both in vitro and in vivo.

•

The contact-killing surfaces demonstrate great potential for practical application to combat bacterial infections associated with implantable materials and devices.

Recent Progress in Bile Acid-Based Antimicrobials

With the emergence of drug-resistant bacteria and the formation of biofilms by bacteria and fungi, microbial infections gradually threaten global health. Natural antimicrobial peptides (AMPs) have low susceptibility for developing resistance due to the membrane targeted mechanism, but instability and high manufacturing cost limit their applications in clinic. Bile acids, a group of steroids in the human body, with high stability, biocompatibility, and inherent facial amphiphilic structure similar to the characteristics of AMPs, have been applied to the biological field, such as drug delivery systems, self-healing hydrogels, antimicrobials, and so on. In this review, we mainly focus on the different classes of bile acid-based antimicrobials in recent years. Various designs and methods for the preparation of unimolecular antimicrobials with bile acid skeletons are first introduced, including coupling of primary amine, quaternary ammonium, and amino acid units with bile acid skeletons. Some representative oligomeric antimicrobials, including dimers of bile acids, are summarized. Finally, macromolecular antimicrobials bearing some positive charges at the main chain or side chain and interaction mechanisms of these bile acid-based antimicrobials are discussed.

Biomaterials-based formulations and surfaces to combat viral infectious diseases

Rapidly growing viral infections are potent risks to public health worldwide. Accessible virus-specific antiviral vaccines and drugs are therapeutically inert to emerging viruses, such as Zika, Ebola, and severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). Therefore, discovering ways to prevent and control viral infections is among the foremost medical challenge of our time. Recently, innovative technologies are emerging that involve the development of new biomaterial-based formulations and surfaces endowed with broad-spectrum antiviral properties. Here, we review emerging biomaterials technologies for controlling viral infections. Relevant advances in biomaterials employed with nanotechnology to inactivate viruses or to inhibit virus replication and further their translation in safe and effective antiviral formulations in clinical trials are discussed. We have included antiviral approaches based on both organic and inorganic nanoparticles (NPs), which offer many advantages over molecular medicine. An insight into the development of immunomodulatory scaffolds in designing new platforms for personalized vaccines is also considered. Substantial research on natural products and herbal medicines and their potential in novel antiviral drugs are discussed. Furthermore, to control contagious viral infections, i.e., to reduce the viral load on surfaces, current strategies focusing on biomimetic anti-adhesive surfaces through nanostructured topography and hydrophobic surface modification techniques are introduced. Biomaterial surfaces functionalized with antimicrobial polymers and nanoparticles against viral infections are also discussed. We recognize the importance of research on antiviral biomaterials and present potential strategies for future directions in applying these biomaterial-based approaches to control viral infections and SARS-CoV-2.

Polymeric paint coated common-touch surfaces that can kill bacteria, fungi and influenza virus

In the current situation of COVID-19 pandemic, the role of surfaces in transmitting pathogens is clearer than ever. Herein, we report an organo-soluble, quaternary antimicrobial paint (QAP) based on polyethyleneimine (PEI) which was coated on a wide range of surfaces such as polyvinylchloride (PVC), nylon, rubber, aluminum. The coating completely killed drug-resistant bacteria. It showed rapid bactericidal properties with complete killing in 45 min of exposure and lowered bacterial adherence, asserting self-sterilizing nature. The coating exhibited complete killing of stationary phase cells of bacteria. The coating killed drug-resistant C. albicans strains. Importantly, QAP coating showed complete killing of influenza virus (H1N1).

Quaternary Lipophilic Chitosan and Gelatin Cross-Linked Antibacterial Hydrogel Effectively Kills Multidrug-Resistant Bacteria with Minimal Toxicity toward Mammalian Cells

Wounds or tissue openings in the skin are susceptible to bacterial attack, which can deteriorate and slow down the healing process. In this regard, antimicrobial gels are valuable as they mitigate the infection spread and assist in the healing. Despite the success, commercially available release-active antimicrobial gels suffer from narrow-spectrum activity, resistance induction, reservoir exhaustion, and in some cases may be associated with toxicity. To circumvent these limitations, herein, we have developed new quaternary lipophilic chitosan derivatives (QuaChi) synthesized by modifying the primary alcohol of the sugar moieties without altering the free amino groups of glucosamines. Compared to protonated chitosan, the synthesized derivatives exhibited improved water solubility and enhanced antibacterial activity against multidrug-resistant Gram-positive and Gram-negative bacteria including clinical isolates. The enhanced antibacterial activity was evident from the bacterial membrane depolarization leading to rapid inactivation of ∼10⁵-10⁶ bacterial cells within 2 h. The applicability of the chitosan derivatives was further demonstrated by developing antibacterial hydrogels by cross-linking the free amino groups of QuaChi with biocompatible gelatin through amide linkages. The hydrogel showed ∼5-7 log reduction of various multidrug-resistant bacteria including the stationary-phase cells within 6 h. Scanning electron microscopy revealed the loss of integrity of the bacterial structure when treated with the hydrogel, whereas mammalian cells (human embryonic kidney-293 (HEK-293)), when exposed to the hydrogel, appeared to be healthy with retained morphology. Collectively, these findings suggest that the developed hydrogel formulation can find potential applications to combat notorious drug-resistant bacterial infections in the healthcare settings.

Self-Adaptive Antibacterial Coating for Universal Polymeric Substrates Based on a Micrometer-Scale Hierarchical Polymer Brush System

Surface-tethered hierarchical polymer brushes find wide applications in the development of antibacterial surfaces due to the well-defined spatial distribution and the separate but complementary properties of different blocks. Existing methods to achieve such polymer brushes mainly focused on inorganic material substrates, precluding their practical applications on common medical devices. In this work, a hierarchical polymer brush system is proposed and facilely constructed on polymeric substrates via light living graft polymerization. The polymer brush system with micrometer-scale thickness exhibits a unique hierarchical architecture consisting of a poly(hydroxyethyl methacrylate) (PHEMA) outer layer and an anionic inner layer loading with cationic antimicrobial peptide (AMP) via electrostatic attraction. The surface of this system inhibits the initial adhesion of bacteria by the PHEMA hydration outer layer under neutral pH conditions; when bacteria adhere and proliferate on this surface, the bacterially induced acidification triggers the cleavage of labile amide bonds within the inner layer to expose the positively charged amines and vigorously release melittin (MLT), allowing the surface to timely kill the adhering bacteria. The hierarchical surface employs multiple antibacterial mechanisms to combat bacterial infection and shows high sensitiveness and responsiveness to pathogens. A new paradigm is supplied by this modular hierarchical polymer brushes system for the progress of intelligent surfaces on universal polymer substrates, showing great potential to a promising strategy for preventing infection related to medical devices.