Nanosilica: Recent Progress in Synthesis, Functionalization, Biocompatibility, and Biomedical Applications

Engineering spin coherence in core-shell diamond nanocrystals

Fluorescent diamond nanocrystals can host spin qubit sensors capable of probing the physical properties of biological systems with nanoscale spatial resolution. Sub-100 nm diamond nanosensors can readily be delivered into intact cells and even living organisms. However, applications beyond current proof-of-principle experiments require a substantial increase in sensitivity, which is limited by surface induced charge instability and electron-spin dephasing. In this work, we utilize engineered core-shell structures to achieve a drastic increase in qubit coherence times (T2) from 1.1 to 35 μs in bare nanodiamonds to upward of 52 to 87 μs. We use electron-paramagnetic-resonance results to present a band bending model and connect silica encapsulation to the removal of deleterious mid-gap surface states that are negatively affecting the qubit's spin properties. Combined with a 1.9-fold increase in particle luminescence these advances correspond to up to two-order-of-magnitude reduction in integration time. Probing qubit dynamics at a single particle level further reveals that the noise characteristics fundamentally change from a bath with spins that rearrange their spatial configuration during the course of an experiment to a more dilute static bath. The observed results shed light on the underlying mechanisms governing fluorescence and spin properties in diamond nanocrystals and offer an effective noise mitigation strategy based on engineered core-shell structures.

Thermal-activated Polydopamine bilayer film exhibits dual-mode synergistic antibacterial properties for enhanced salmon preservation

Foodborne pathogens threaten food safety and human health, prompting the need for innovative preservation solutions. Polydopamine endowed with photothermal properties represents a novel material for the inhibition of foodborne pathogens. This study develops a bilayer antibacterial film using polydopamine-berberine nanoparticles (PDA-BBR), leveraging dual-mode synergistic antibacterial effects through chemical and photothermal mechanisms. The film, incorporating starch and polylactic acid layers, was prepared via solvent casting and characterized for mechanical properties, water vapor permeability (WVP), and antibacterial efficacy. The results revealed that the 2.0 % PDA-BBR film achieved a tensile strength of 4.00 MPa, a WVP of 2.30 × 10-11 g/m·s·Pa, and over 95 % inhibition against Escherichia coli and Staphylococcus aureus. Moreover, the film preserved salmon quality by maintaining texture, lowering total volatile basic nitrogen to 16.19 mg/100 g, and inhibiting spoilage during 9 days of storage at 4 °C. These findings highlight PDA-BBR film as a promising food preservation approach with enhanced antibacterial and preservation performance.

Self-Assembly Oligomeric Anthocyanin-Based Core-Shell Structure of Nanoparticles Enhances the Delivery and Efficacy of Berberine in Osteoarthritis

Osteoarthritis (OA) is a degenerative joint disease that significantly contributes to functional disability, primarily due to inflammation and cell apoptosis. Berberine (BBR) has demonstrated notable anti-inflammatory and antiapoptotic effects in the treatment of OA. However, despite its promising pharmacological properties, the naturally occurring hydrophobic properties and limited solubility in water restrict the efficacy of BBR. Therefore, excipients are required to modify BBR. Oligomeric proanthocyanidins (OPAs) are dimers, trimers, and tetramers of proanthocyanidins (PAs). The unique interface properties of the OPAs underscore their potential as drug carriers. OPAs as natural carriers enhance medication effectiveness and significantly reduce the incidence of side effects. Herein, we developed natural self-assembled nanoparticles between BBR and the OPAs (BBR-OPAs NPs). By adopting the unification of medicines and excipients, the OPAs-based drug delivery system serves as an effective carrier and exerts therapeutic effects in OA treatment. The formation of BBR-OPAs NPs has been core-shell structure, as confirmed by transmission electron microscopy (TEM), 2D NOESY spectroscopy, and molecular dynamics (MD) simulation. The BBR-OPAs NPs exhibited good long-acting release capability due to their strong noncovalent interactions, making them competitive candidates for treating OA. Microcomputed tomography (micro-CT) scanning and histological evaluation further confirmed the efficacy of BBR-OPAs NPs in treating OA. In vivo assessments demonstrated that BBR-OPAs NPs inhibited inflammation and apoptosis, thereby preventing the progression of OA. Furthermore, treatment with BBR-OPAs NPs can inhibit synovial inflammation and protect chondrocytes. OPAs show broad prospects as drug delivery carriers and exhibit great potential in the treatment of OA.

A Comprehensive Review on the Role of Nanosilica as a Toughening Agent for Enhanced Epoxy Composites for Aerospace Applications

This review provides a thorough review on nanosilica as a strengthening component in epoxy composites, with a specific emphasis on its suitability for use in aerospace applications. The study commences by examining the distinctive characteristics of nanosilica, encompassing its methods of synthesis as well as its efficacy in augmenting the mechanical and thermal properties of epoxy-based composites. A substantial part of the review focuses on assessing the efficiency of nanosilica-reinforced glass fiber composite laminates, particularly in the field of aerospace structural applications. The issue of low toughness in epoxy composites, specifically the occurrence of crack growth and propagation when subjected to stress, is tackled through the investigation of different toughening techniques. These techniques involve the addition of nanosilica and liquid rubber tougheners such as ETBN. In addition, this review presents the techniques used to distribute nanosilica particles within epoxy resins and offers a detailed examination of the mechanical testing and characterization methods employed for these nanocomposites. The study determines that nanosilica, owing to its substantial surface area and mechanical durability, greatly improves the resilience and overall mechanical efficacy of epoxy composites, rendering it a highly promising material for the aerospace sector. This study suggests that addition of nanosilica in epoxy-based composites until 5% by weight gives the best possible outcomes with respect to increment in mechanical properties like modulus, strength, and toughness.

Synthesis and characterization of piperine-modified mesoporous silica nanoparticles for biomedical applications

Mesoporous silica nanoparticles (MSNs) have displayed high-potential prospects in biomedical use, especially for drug delivery due to large surface area, tunable pore size and simple surface functionalization. The objective behind the present research is to synthesize and profile piperine-modified MSNs for their preparation due to antioxidative anticarcinogenic, anti-inflammatory properties of the alkaloid chosen as a modifier. In the study, silica piperine nanoparticles (SPN) were fabricated based on a modified Stöber method. Characterization techniques including SEM, TEM, AFM, FTIR, XRD, and DSC showed significant differences of incorporated piperine in the production process to plain MSN properties. Piperine was observed to inhibit nanoparticles' growth so that they became smaller, heterogeneous, with a changed morphology and surface chemistry. As a strong confirmation of covalent incorporation, spectroscopic data showed the presence of electrons in the piperine's functional group that were exchanged into some silanol groups and removed excessive surface energy. The antioxidant activity of SPNs revealed that the silica matrix, and moreover bioactive piperine combination resulted to significant increase in enhanced antioxidant potential. In general, the results of this study offer meaningful lessons about the utilization and manipulation of piperine to suit MSN in a bid to optimize them for biomedical uses such as drug delivery applications where its antioxidant characteristics may bring therapeutic benefits. This holistic characterization and standardization of piperine-modified MSNs sets the solid stage for further project practice and advance adjustment in aluminosilicate nanostructures designed for biomedical application.

Sol-Gel Synthesis of Phosphorylcholine Zwitterion-Decorated Silica Gels

Zwitterion-functionalized silica particles are desirable as antifouling, highly hydrated, biocompatible materials. Existing methods to covalently attach zwitterionic groups to the silica particle surface generally require significant synthesis and purification procedures, and these have largely tended to focus on sulfobetaine-type zwitterionic moieties. This work describes a simple, one-pot, acid-catalyzed sol-gel synthesis approach to create phosphorylcholine (PC)-type zwitterionic silica gels via the condensation of hydroxyl groups on L-α-glycerophosphorylcholine (GPC) with silanol groups generated during the sol-gel reaction. The approach was successfully employed to create both PC-modified xerogels and ionogels (ionic liquid electrolyte-rich silica-supported gels). Silica gel particle morphologies and surfaces were characterized using scanning electron microscopy (SEM) with energy dispersive X-ray spectroscopy (EDS). EDS data revealed the presence of approximately 2-3 wt % phosphorus (from GPC) on all silica surfaces after thoroughly washing them postreaction. PC-functionalized ionogels displayed shear-thinning behavior and an approximately 2 to 4-fold increase in shear viscosity versus the control ionogel synthesized without GPC, while thermal analysis indicated that all ionogels yielded similar total silica content (5-7 wt %). This study indicates the promise of a simple, one-pot method for generating PC-decorated silica gels and presents future design possibilities for other novel materials leveraging zwitterionic molecules that possess hydroxyl groups.

Bioharvesting and improvement of nano-silica yield from bagasse by irradiated Curvularia spicifera

BACKGROUND

Sugarcane bagasse is an organic waste material abundant in silica. Silica is a very significant inorganic substance that is widely employed in a variety of industrial applications.This study displays an eco-friendly and inexpensive biotransformation process producing silica nanoparticles (SNPs) using a primarily reported Curvularias picifera strain under solid-state fermentation (SSF) on bagasse as a starting material. The produced SNps were characterized by XRD, DLS, Zeta sizer, FT-IR, SEM, and TEM analyses. The silica bioleaching ability of C. spicifera was further amended by exposure to gamma irradiation at a dose of 750 Gy. The biotransformation process was additionally optimized by applying response surface methodology (RSM).

RESULT

According to screening experiments, the selected promising fungal isolate was identified as Curvularia spicifera AUMC 15532. The SNPs fabrication was significantly enhanced by gamma irradiation (optimal dose 750 Gy) and response surface methodology for the first time. The attained SNps' size ranged from 30.6-130.4 nm depending on the biotransformation conditions employed in the statistical model, which is available for numerous applications. The XRD shows the amorphous nature of the fabricated SNPs, whereas the FTIR analysis revealed the three characteristic bands of SNPs. The outcomes of the response surface optimization demonstrated that the model exhibited an adequate degree of precision, as evidenced by the higher R2 value (0.9511) and adjusted R2 value (0.8940), which confirmed the model's close correspondence with the experimental data. A gamma irradiation dose of 750 Gy was optimal for a significant increase in the silica bioleaching activity by C. spicifera fermented bagasse (71.4% increase compared to the non-irradiated strain).

Synthesis of anisotropic silica nanoparticles by organic amine with diverse structures

Herein, we synthesized anisotropic silica nanoparticles (AISNPs) with organic amines with different structures. Monoamines and diamines with distance between amine groups shorter thanca.4 Å have been observed to facilitate the formation of isotropic silica nanoparticles (ISNPs). AISNPs were synthesized with diamines with distance between amine groups longer thanca.4 Å and linear structures of triamines. Non-linear structures with amine groups positioned in a triangular configuration and the cage-like structure of tetra-amines directed the formation of ISNPs. It has been speculated that the formation of AISNPs would be due to the spherical primary particles connecting by organic amines with two or more amine groups with distances between them longer thanca.4 Å. On the contrary, the formation of ISNPs would be attributed to the adsorption of two amine groups on the same primary particles, or to steric hindrance that prevent their connection.

Exploring Gluconamide-Modified Silica Nanoparticles of Different Sizes as Effective Carriers for Antimicrobial Photodynamic Therapy

Antimicrobial resistance (AMR), a consequence of the ability of microorganisms, especially bacteria, to develop resistance against conventional antibiotics, hampering the treatment of common infections, is recognized as one of the most imperative health threats of this century. Antibacterial photodynamic therapy (aPDT) has emerged as a promising alternative strategy, utilizing photosensitizers activated by light to generate reactive oxygen species (ROS) that kill pathogens without inducing resistance. In this work, we synthesized silica nanoparticles (NPs) of different sizes (20 nm, 80 nm, and 250 nm) functionalized with the photosensitizer Rose Bengal (RB) and a gluconamide ligand, which targets Gram-negative bacteria, to assess their potential in aPDT. Comprehensive characterization, including dynamic light scattering (DLS) and photophysical analysis, confirmed the stability and effective singlet oxygen production of the functionalized nanoparticles. Although the surface loading density of Rose Bengal was constant at the nanoparticle external surface, RB loading (in mg/g nanoparticle) was size-dependent, decreasing with increasing nanoparticle diameter. Further, the spherical geometry of nanoparticles favored smaller nanoparticles for antibacterial PDT, as this maximizes the surface contact area with the bacteria wall, with the smallest (20 nm) and intermediate (80 nm) particles being more promising. Bacterial assays in E. coli revealed minimal dark toxicity and significant light-activated phototoxicity for the RB-loaded nanoparticles. The addition of gluconamide notably enhanced phototoxic activity, particularly in the smallest nanoparticles (RB-G-20@SiNP), which demonstrated the highest phototoxicity-to-cytotoxicity ratio. These findings indicate that small, gluconamide-functionalized silica nanoparticles are highly effective for targeted aPDT, offering a robust strategy to combat AMR.

A Descriptive Review on the Potential Use of Diatom Biosilica as a Powerful Functional Biomaterial: A Natural Drug Delivery System

Although various chemically synthesized materials are essential in medicine, food, and agriculture, they can exert unexpected side effects on the environment and human health by releasing certain toxic chemicals. Therefore, eco-friendly and biocompatible biomaterials based on natural resources are being actively explored. Recently, biosilica derived from diatoms has attracted attention in various biomedical fields, including drug delivery systems (DDS), due to its uniform porous nano-pattern, hierarchical structure, and abundant silanol functional groups. Importantly, the structural characteristics of diatom biosilica improve the solubility of poorly soluble substances and enable sustained release of loaded drugs. Additionally, diatom biosilica predominantly comprises SiO2, has high biocompatibility, and can easily hybridize with other DDS platforms, including hydrogels and cationic DDS, owing to its strong negative charge and abundant silanol groups. This review explores the potential applications of various diatom biosilica-based DDS in various biomedical fields, with a particular focus on hybrid DDS utilizing them.

Pickering Emulsions Biocatalysis: Recent Developments and Emerging Trends

Biocatalysis within biphasic systems is gaining significant attention in the field of synthetic chemistry, primarily for its ability to solve the problem of incompatible solubilities between biocatalysts and organic compounds. By forming an emulsion from these two-phase systems, a larger surface area is created, which greatly improves the mass transfer of substrates to the biocatalysts. Among the various types of emulsions, Pickering emulsions stand out due to their excellent stability, compatibility with biological substances, and the ease with which they can be formed and separated. This makes them ideal for reusing both the emulsifiers and the biocatalysts. This review explores the latest developments in biocatalysis using Pickering emulsions. It covers the structural features, methods of creation, innovations in flow biocatalysis, and the role of interfaces in these processes. Additionally, the challenges and future directions are discussed in combining chemical and biological catalysts within Pickering emulsion frameworks to advance synthetic methodologies.

Kinetic detection of hydrogen peroxide in single horseradish peroxidase-concentrated silica particle using confocal fluorescence microspectroscopic measurement

In the present study, we propose a scheme for detecting H2O2 by using horseradish peroxidase (HRP) adsorbed onto single silica particles and fluorescence microspectroscopy. When the silica particles were immersed in an HRP solution, the HRP concentration in the silica particles increased by a factor of 690 compared to that in the bulk aqueous solution because HRP was adsorbed on the silica surface. When a single particle containing HRP was added to a mixed solution of H2O2 and Amplex Red, fluorescence from resorufin, which was produced by the reaction of HRP, H2O2, and Amplex Red, was observed. The fluorescence from the resorufin in the particles increased after a single particle was added to the solution, and the release of resorufin was observed. As the concentration of H2O2 (CH2O2) decreased, the time it takes for fluorescence intensity to reach its maximum was shorter. The detection limit for H2O2 in the present system was 980 nM. The reaction behavior of a single silica particle was evaluated using a spherical diffusion model, which explains the approximate concentration change of resorufin in the silica particle. The proposed method has the advantages of simple sample preparation and detection, low sample consumption, and a short detection time.

Synthetic silica fibers of different length, diameter and shape: synthesis and interaction with rat (NR8383) and human (THP-1) macrophages in vitro, including chemotaxis and gene expression profile

BACKGROUND

Inhalation of biopersistent fibers like asbestos can cause strong chronic inflammatory effects, often resulting in fibrosis or even cancer. The interplay between fiber shape, fiber size and the resulting biological effects is still poorly understood due to the lack of reference materials.

RESULTS

We investigated how length, diameter, aspect ratio, and shape of synthetic silica fibers influence inflammatory effects at doses up to 250 µg cm-2. Silica nanofibers were prepared with different diameter and shape. Straight (length ca. 6 to 8 µm, thickness ca. 0.25 to 0.35 µm, aspect ratio ca. 17:1 to 32:1) and curly fibers (length ca. 9 µm, thickness ca. 0.13 µm, radius of curvature ca. 0.5 µm, aspect ratio ca. 70:1) were dispersed in water with no apparent change in the fiber shape during up to 28 days. Upon immersion in aqueous saline (DPBS), the fibers released about 5 wt% silica after 7 days irrespectively of their shape. The uptake of the fibers by macrophages (human THP-1 and rat NR8383) was studied by scanning electron microscopy and confocal laser scanning microscopy. Some fibers were completely taken up whereas others were only partially internalized, leading to visual damage of the cell wall. The biological effects were assessed by determining cell toxicity, particle-induced chemotaxis, and the induction of gene expression of inflammatory mediators.

CONCLUSIONS

Straight fibers were only slightly cytotoxic and caused weak cell migration, regardless of their thickness, while the curly fibers were more toxic and caused significantly stronger chemotaxis. Curly fibers also had the strongest effect on the expression of cytokines and chemokines. This may be due to the different aspect ratio or its twisted shape.

In-Bath 3D Printing of Anisotropic Shape-Memory Cryogels Functionalized with Bone-Bioactive Nanoparticles

Cryogels exhibit unique shape memory with full recovery and structural stability features after multiple injections. These constructs also possess enhanced cell permeability and nutrient diffusion when compared to typical bulk hydrogels. Volumetric processing of cryogels functionalized with nanosized units has potential to widen their biomedical applications, however this has remained challenging and relatively underexplored. In this study, we report a novel methodology that combines suspension 3D printing with directional freezing for the fabrication of nanocomposite cryogels with configurable anisotropy. When compared to conventional bulk or freeze-dried hydrogels, nanocomposite cryogel formulations exhibit excellent shape recovery (>95%) and higher pore connectivity. Suspension printing, assisted with a prechilled metal grid, was optimized to induce anisotropy. The addition of calcium- and phosphate-doped mesoporous silica nanoparticles into the cryogel matrix enhanced bioactivity toward orthopedic applications without hindering the printing process. Notably, the nanocomposite 3D printed cryogels exhibit injectable shape memory while also featuring a lamellar topography. The fabrication of these constructs was highly reproducible and exhibited potential for a cell-delivery injectable cryogel with no cytotoxicity to human-derived adipose stem cells. Hence, in this work, it was possible to combine a gravity defying 3D printed methodology with injectable and controlled anisotropic macroporous structures containing bioactive nanoparticles. This methodology ameliorates highly tunable injectable 3D printed anisotropic nanocomposite cryogels with a user-programmable degree of structural complexity.

Highly-ordered assembled organic fluorescent materials for high-resolution bio-sensing: a review

Organic fluorescent materials (OFMs) play a crucial role in the development of biosensors, enabling the extraction of biochemical information within cells and organisms, extending to the human body. Concurrently, OFM biosensors contribute significantly to the progress of modern medical and biological research. However, the practical applications of OFM biosensors face challenges, including issues related to low resolution, dispersivity, and stability. To overcome these challenges, scientists have introduced interactive elements to enhance the order of OFMs. Highly-ordered assembled OFMs represent a novel material type applied to biosensors. In comparison to conventional fluorescent materials, highly-ordered assembled OFMs typically exhibit robust anti-diffusion properties, high imaging contrast, and excellent stability. This approach has emerged as a promising method for effectively tracking bio-signals, particularly in the non-invasive monitoring of chronic diseases. This review introduces several highly-ordered assembled OFMs used in biosensors and also discusses various interactions that are responsible for their assembly, such as hydrogen bonding, π-π interaction, dipole-dipole interaction, and ion electrostatic interaction. Furthermore, it delves into the various applications of these biosensors while addressing the drawbacks that currently limit their commercial application. This review aims to provide a theoretical foundation for designing high-performance, highly-ordered assembled OFM biosensors suitable for practical applications. Additionally, it sheds light on the evolving trends in OFM biosensors and their application fields, offering valuable insights into the future of this dynamic research area.

Stimuli-responsive biodegradable silica nanoparticles: From native structure designs to biological applications

Due to their inherent advantages, silica nanoparticles (SiNPs) have greatly potential applications as bioactive materials in biosensors/biomedicine. However, the long-term and nonspecific accumulation in healthy tissues may give rise to toxicity, thereby impeding their widespread clinical application. Hence, it is imperative and noteworthy to develop biodegradable and clearable SiNPs for biomedical purposes. Recently, the design of multi-stimuli responsive SiNPs to improve degradation efficiency under specific pathological conditions has increased their clinical trial potential as theranostic nanoplatform. This review comprehensively summaries the rational design and recent progress of biodegradable SiNPs under various internal and external stimuli for rapid in vivo degradation and clearance. In addition, the factors that affect the biodegradation of SiNPs are also discussed. We believe that this systematic review will offer profound stimulus and timely guide for further research in the field of SiNP-based nanosensors/nanomedicine.

A Critical Review Examining the Characteristics of Modified Concretes with Different Nanomaterials

The movement of the construction industry towards sustainable development has drawn attention to the revision of concrete. In addition to reducing pollution, the use of nano-materials should lead to the provision of higher quality concrete in terms of regulatory items (workability, resistance characteristics, durability characteristics, microstructure). The present study investigates 15 key characteristics of concrete modified with nano-CaCO3, nano-clay, nano-TiO2, and nano-SiO2. The results of the study showed that nanomaterials significantly have a positive effect on the hydration mechanism and the production of more C-S-H gel. The evaluation of resistance characteristics also indicates the promising results of these valuable materials. The durability characteristics of nano-containing concrete showed significant improvement despite high dispersion. Concrete in coastal areas (such as bridges or platforms), concrete exposed to radiation (such as hospitals), concrete exposed to impact load (such as nuclear power plants), and concrete containing recycled aggregate (such as bricks, tiles, ceramics) can be effectively improved by using nanomaterials. It is hoped that the current review paper can provide an effective image and idea for future applied studies by other researchers.

A polyglutamic acid/tannic acid-based nano drug delivery system: Antibacterial, immunoregulation and sustained therapeutic strategies for oral ulcers

Oral ulcers are a common inflammatory mucosal ulcer, and the moist and dynamic environment in the oral cavity makes topical pharmacological treatment of oral ulcers challenging. Herein, oral ulcer tissue adhesion nanoparticles were prepared by using esterification reaction between polyglutamic acid and tannic acid, and at the same time doxycycline hydrochloride was loaded into the nanoparticles. The obtained slow drug release effect of the drug-loaded nanoparticles reduced the toxicity of the drug, and by penetrating into the fine crevice region of the wound tissue and adhering to it, they could in-situ release the carried drug more effectively and thus have shown significant antibacterial effects. In addition, tannic acid in the system conferred adhesion, antioxidant and immune regulation activities to the nanocarriers. A rat oral ulcer model based on fluorescent labeling was established to investigate the retention of nanoparticles at the ulcer, and the results showed that the retention rate of drug-loaded nanoparticles at the ulcer was 17 times higher than that of pure drug. Due to the antibacterial and immune regulation effects of the drug-loaded nanoparticles, the healing of oral ulcer wounds was greatly accelerated. Such application of doxycycline hydrochloride loaded polyglutamic acid/tannic acid nanoparticles is a novel and effective treatment strategy for oral ulcer.

Investigation of Thermal, Mechanical and Shape Memory Properties of 3D-Printed Functionally Graded Nanocomposite Materials

In this study, a 3D-printed photocurable resin was developed by incorporating graphene nanoplatelets functionalised with melamine to investigate the thermal, mechanical, fracture and shape memory behaviours. The objective of this work was to produce a printed functionally graded nanocomposite material that has a smart temperature-responsive structure; presents good thermal stability, strength and fracture toughness; and can demonstrate shape-changing motions, such as sequential transformations, over time. The functionalised graphene nanoplatelets were examined via thermogravimetric analysis, Fourier transform infrared spectroscopy, Raman spectroscopy and ultraviolet-visible spectroscopy. Thermogravimetric analysis showed that the degradation temperature of the nanocomposite containing 0.1 wt% of functionalised graphene nanoplatelets at the weight loss of 5% was 304 °C, greater than that of the neat one by 29%. Dynamic mechanical analysis results showed property enhancements of the storage modulus and glass transition temperature. Fracture toughness, tensile strength and impact resistance were improved by 18%, 35% and 78%, respectively. The shape memory tests were performed to obtain the temperature-time recovery behaviour of the 3D-printed structures. The addition of functionalised graphene nanoplatelets demonstrated an enhancement in the shape recovery ratios. Generally, the five subsequent cycles were notably stable with a high recovery ratio of 97-100% for the flat shape and circular shape of the M-GNP specimens. On the other hand, these values were between 91% and 94% for the corresponding neat specimens.

Synthetic Opals or Versatile Nanotools-A One-Step Synthesis of Uniform Spherical Silica Particles

Synthetic opals, a composition of homogeneous silica spheres in the mesoscale size range, have attracted the attention of scientists due to their favorable chemical and physical properties. Their chemical inertness and stability, biocompatibility, homogeneity, elevated specific surface area, and ease of functionalization of their surfaces make them a versatile nanotool. In the present study, the Stöber process was used to investigate the effect of parameters, such as reagent concentration and synthesis temperature, on the resulting silica particle size and structure. The optimal conditions for successfully obtaining homogeneous particles in the mesoscale range with high reproducibility were investigated. Several synthesis procedures and their dependence on the reaction temperature were presented to allow the selection of the assumed diameter of silica spheres. The numerous samples obtained were examined for size, homogeneity, structure, and specific surface area. On the basis of specific surface area measurements and nuclear magnetic resonance studies, the internal hierarchical structure of the spherical silica was confirmed as consisting of a solid core and layers of secondary spheres covered by a solid shell. Structural studies (X-ray Spectroscopy, X-ray Absorption Near-Edge Structure, and nuclear magnetic resonance), together with infrared vibrational spectroscopy, showed no dependence of the structure of the obtained mesospheres on the concentration of reagents and the size of the obtained particles.

A novel and economical approach for the synthesis of short rod-shaped mesoporous silica nanoparticles from coal fly ash waste by Bacillus circulans MTCC 6811

Coal fly ash (CFA) is an industrial byproduct produced during the production of electricity in thermal power plants from the burning of pulverized coal. It is considered hazardous due to the presence of toxic heavy metals while it is also considered valuable due to the presence of value-added minerals like silicates, alumina, and iron oxides. Silica nanoparticles' demands and application have increased drastically in the last decade due to their mesoporous nature, high surface area to volume ratio, etc. Here in the present research work, short rod-shaped, mesoporous silica nanoparticles (MSN) have been synthesized from coal fly ash by using Bacillus circulans MTCC 6811 in two steps. Firstly, CFA was kept with the bacterial culture for bioleaching for 25 days in an incubator shaker at 120 rpm. Secondly, the dissolved silica in the medium was precipitated with the 4 M sodium hydroxide to obtain a short rod-shaped MSN. The purification of the synthesized silica particle was done by treating them with 1 M HCl at 120 °C, for 90 min. The synthesized short rod-shaped MSN were characterized by UV-vis spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), Particle size analyzer (PSA), Field emission scanning electron microscopy (FESEM), and transmission electron microscope. The microscopic techniques revealed the short rod-shaped mesoporous silica nanoparticles (MSN) for the final nano-silica, whose size varies from 40 to 80 nm, with an average size of 36 ± 5 nm. The XRD shows the crystalline nature of the synthesized MSN having a crystallite size of 36 nm. The FTIR showed the three characteristic bands in the range of 400-1100 cm-1, indicating the purity of the sample. The energy dispersive X-ray (EDX) showed 53.04 wt% oxygen and 43.42% Si along with 3.54% carbon in the final MSN. The particle size analyzer revealed that the average particle size is 368.7 nm in radius and the polydispersity index (PDI) is 0.667. Such a novel and economical approach could be helpful in the synthesis of silica in high yield with high purity from coal fly ash and other similar waste.

Preparation of Janus fluorescent probe based on an asymmetrical silica and its application in glucose and alpha-fetoprotein detection

Janus particles have been considered suitable for biomedicine owing to their asymmetric structure and unique properties. Although Janus particles have been applied in biosensing for dual-mode sensing, there are almost no reports for the detection of multiple indicators. In fact, many patients require different diagnoses, such as the examination of hepatogenic diseases in diabetics. Here, a Janus particle based on SiO₂ was synthesized using a Pickering emulsion method. A novel strategy for detecting glucose and alpha-fetoprotein (AFP) based on different principles using this Janus particle was then constructed as a detection platform. Composed of adjustable dendritic silica loaded with gold nanoclusters (Au NCs) and glucose oxidase (GOx) and spherical SiO₂ coupled with AFP antibody, this Janus fluorescent probe achieved the double detection of glucose and AFP. With the protection of dendritic silica, the enzyme temperature stability was enhanced. Moreover, the low limit of detection for glucose (0.5 μM in PBS and 2.5 μM in serum) and AFP (0.5 ng mL^-1) illustrated the feasibility of the application of the Janus material in integrated detection. This work not only supported the use of a Janus fluorescent probe as a detection platform toward glucose and AFP but also showed the potential of Janus particles in integrated detection in the future.

Multi-leveled Nanosilicate Implants Can Facilitate Near-Perfect Bone Healing

Several studies have shown that nanosilicate-reinforced scaffolds are suitable for bone regeneration. However, hydrogels are inherently too soft for load-bearing bone defects of critical sizes, and hard scaffolds typically do not provide a suitable three-dimensional (3D) microenvironment for cells to thrive, grow, and differentiate naturally. In this study, we bypass these long-standing challenges by fabricating a cell-free multi-level implant consisting of a porous and hard bone-like framework capable of providing load-bearing support and a softer native-like phase that has been reinforced with nanosilicates. The system was tested with rat bone marrow mesenchymal stem cells in vitro and as a cell-free system in a critical-sized rat bone defect. Overall, our combinatorial and multi-level implant design displayed remarkable osteoconductivity in vitro without differentiation factors, expressing significant levels of osteogenic markers compared to unmodified groups. Moreover, after 8 weeks of implantation, histological and immunohistochemical assays indicated that the cell-free scaffolds enhanced bone repair up to approximately 84% following a near-complete defect healing. Overall, our results suggest that the proposed nanosilicate bioceramic implant could herald a new age in the field of orthopedics.

Organic Semiconducting Nanoparticles for Biosensor: A Review

Highly bio-compatible organic semiconductors are widely used as biosensors, but their long-term stability can be compromised due to photo-degradation and structural instability. To address this issue, scientists have developed organic semiconductor nanoparticles (OSNs) by incorporating organic semiconductors into a stable framework or self-assembled structure. OSNs have shown excellent performance and can be used as high-resolution biosensors in modern medical and biological research. They have been used for a wide range of applications, such as detecting small biological molecules, nucleic acids, and enzyme levels, as well as vascular imaging, tumor localization, and more. In particular, OSNs can simulate fine particulate matters (PM_2.5, indicating particulate matter with an aerodynamic diameter less than or equal to 2.5 μm) and can be used to study the biodistribution, clearance pathways, and health effects of such particles. However, there are still some problems that need to be solved, such as toxicity, metabolic mechanism, and fluorescence intensity. In this review, based on the structure and design strategies of OSNs, we introduce various types of OSNs-based biosensors with functional groups used as biosensors and discuss their applications in both in vitro and in vivo tracking. Finally, we also discuss the design strategies and potential future trends of OSNs-based biosensors. This review provides a theoretical scaffold for the design of high-performance OSNs-based biosensors and highlights important trends and future directions for their development and application.

Biological Use of Nanostructured Silica-Based Materials Functionalized with Metallodrugs: The Spanish Perspective

Since the pioneering work of Vallet-Regí's group on the design and synthesis of mesoporous silica-based materials with therapeutic applications, during the last 15 years, the potential use of mesoporous silica nanostructured materials as drug delivery vehicles has been extensively explored. The versatility of these materials allows the design of a wide variety of platforms that can incorporate numerous agents of interest (fluorophores, proteins, drugs, etc.) in a single scaffold. However, the use of these systems loaded with metallodrugs as cytotoxic agents against different diseases and with distinct therapeutic targets has been studied to a much lesser extent. This review will focus on the work carried out in this field, highlighting both the pioneering and recent contributions of Spanish groups that have synthesized a wide variety of systems based on titanium, tin, ruthenium, copper and silver complexes supported onto nanostructured silica. In addition, this article will also discuss the importance of the structural features of the systems for evaluating and modulating their therapeutic properties. Finally, the most interesting results obtained in the study of the potential therapeutic application of these metallodrug-functionalized silica-based materials against cancer and bacteria will be described, paying special attention to preclinical trials in vivo.

Hierarchy of hybrid materials. Part-II: The place of organics-on-inorganics in it, their composition and applications

Hybrid materials or hybrids incorporating organic and inorganic constituents are emerging as a very potent and promising class of materials due to the diverse but complementary nature of their properties. This complementarity leads to a perfect synergy of properties of the desired materials and products as well as to an extensive range of their application areas. Recently, we have overviewed and classified hybrid materials describing inorganics-in-organics in Part-I (Saveleva, et al., Front. Chem., 2019, 7, 179). Here, we extend that work in Part-II describing organics-on-inorganics, i.e., inorganic materials modified by organic moieties, their structure and functionalities. Inorganic constituents comprise of colloids/nanoparticles and flat surfaces/matrices comprise of metallic (noble metal, metal oxide, metal-organic framework, magnetic nanoparticles, alloy) and non-metallic (minerals, clays, carbons, and ceramics) materials; while organic additives can include molecules (polymers, fluorescence dyes, surfactants), biomolecules (proteins, carbohydtrates, antibodies and nucleic acids) and even higher-level organisms such as cells, bacteria, and microorganisms. Similarly to what was described in Part-I, we look at similar and dissimilar properties of organic-inorganic materials summarizing those bringing complementarity and composition. A broad range of applications of these hybrid materials is also presented whose development is spurred by engaging different scientific research communities.

Silica nanoparticle remodeling under mild conditions: versatile one step conversion of mesoporous to hollow nanoparticles with simultaneous payload loading

A binary mixture of mesoporous silica nanoparticles plus organic polyammonium additive (dye or drug) is cleanly converted upon mild heating into hollow nanoparticles. The remodeled nanoparticle shell is an organized nanoscale assembly of globular additive/silica subunits and cancer cell assays show that a loaded drug additive is bioavailable.

Tuning Mesoporous Silica Nanoparticles in Novel Avenues of Cancer Therapy

The global menace of cancer has led to an increased death toll in recent years. The constant evolution of cancer therapeutics with novel delivery systems has paved the way for translation of innovative therapeutics from bench to bedside. This review explains the significance of mesoporous silica nanoparticles (MSNs) as delivery vehicles with particular emphasis on cancer therapy, including novel opportunities for biomimetic therapeutics and vaccine delivery. Parameters governing MSN synthesis, therapeutic agent loading characteristics, along with tuning of MSN toward cancer cell specificity have been explained. The advent of MSN in nanotheranostics and its potential in forming nanocomposites for imaging purposes have been illustrated. Additionally, various hurdles encountered during the bench to bedside translation have been explained along with potential avenues to circumvent them. This also opens up new horizons in drug delivery, which could be useful to researchers in the years to come.

New insight into brain disease therapy: nanomedicines-crossing blood-brain barrier and extracellular space for drug delivery

INTRODUCTION

Brain diseases including brain tumor, Alzheimer's disease, Parkinson's disease, etc. are difficult to treat. The blood-brain barrier (BBB) is a major obstacle for drug delivery into the brain. Although nano-package and receptor-mediated delivery of nanomedicine markedly increases BBB penetration, it yet did not extensively improve clinical cure rate. Recently, brain extracellular space (ECS) and interstitial fluid (ISF) drainage in ECS have been found to determine whether a drug dissolved in ISF can reach its target cells. Notably, an increase in tortuosity of ECS associated with slower ISF drainage induced by the accumulated harmful substances, such as: amyloid-beta (Aβ), α-synuclein, and metabolic wastes, causes drug delivery failure.

AREAS COVERED

The methods of nano-package and receptor-mediated drug delivery and the penetration efficacy of nanomedicines across BBB and ECS are assessed.

EXPERT OPINION

Invasive delivering drug via ECS and noninvasive near-infrared photo-sensitive nanomedicines may provide a promising benefit to patients with brain disease.

L-arginine-containing mesoporous silica nanoparticles embedded in dental adhesive (Arg@MSN@DAdh) for targeting cariogenic bacteria

Dental caries is the major biofilm-mediated oral disease in the world. The main treatment to restore caries lesions consists of the use of adhesive resin composites due to their good properties. However, the progressive degradation of the adhesive in the medium term makes possible the proliferation of cariogenic bacteria allowing secondary caries to emerge. In this study, a dental adhesive incorporating a drug delivery system based on L-arginine-containing mesoporous silica nanoparticles (MSNs) was used to release this essential amino acid as a source of basicity to neutralize the harmful acidic conditions that mediate the development of dental secondary caries. The in vitro and bacterial culture experiments proved that L-arginine was released in a sustained way from MSNs and diffused out from the dental adhesive, effectively contributing to the reduction of the bacterial strains Streptococcus mutans and Lactobacillus casei. Furthermore, the mechanical and bonding properties of the dental adhesive did not change significantly after the incorporation of L-arginine-containing MSNs. These results are yielding glimmers of promise for the cost-effective prevention of secondary caries.

N-Rich, Polyphenolic Porous Organic Polymer and Its In Vitro Anticancer Activity on Colorectal Cancer

N-rich organic materials bearing polyphenolic moieties in their building networks and nanoscale porosities are very demanding in the context of designing efficient biomaterials or drug carriers for the cancer treatment. Here, we report the synthesis of a new triazine-based secondary-amine- and imine-linked polyphenolic porous organic polymer material TrzTFPPOP and explored its potential for in vitro anticancer activity on the human colorectal carcinoma (HCT 116) cell line. This functionalized (-OH, -NH-, -C=N-) organic material displayed an exceptionally high BET surface area of 2140 m2 g-1 along with hierarchical porosity (micropores and mesopores), and it induced apoptotic changes leading to high efficiency in colon cancer cell destruction via p53-regulated DNA damage pathway. The IC30, IC50, and IC70 values obtained from the MTT assay are 1.24, 3.25, and 5.25 μg/mL, respectively.

Surface Modifiers on Composite Particles for Direct Compaction

Direct compaction (DC) is considered to be the most effective method of tablet production. However, only a small number of the active pharmaceutical ingredients (APIs) can be successfully manufactured into tablets using DC since most APIs lack adequate functional properties to meet DC requirements. The use of suitable modifiers and appropriate co-processing technologies can provide a promising approach for the preparation of composite particles with high functional properties. The purpose of this review is to provide an overview and classification of different modifiers and their multiple combinations that may improve API tableting properties or prepare composite excipients with appropriate co-processed technology, as well as discuss the corresponding modification mechanism. Moreover, it provides solutions for selecting appropriate modifiers and co-processing technologies to prepare composite particles with improved properties.

A review on functional nanoarchitectonics nanocomposites based on octahedral metal atom clusters (Nb6, Mo6, Ta6, W6, Re6): inorganic 0D and 2D powders and films

This review is dedicated to various functional nanoarchitectonic nanocomposites based on molecular octahedral metal atom clusters (Nb₆, Mo₆, Ta₆, W₆, Re₆). Powder and film nanocomposites with two-dimensional, one-dimensional and zero-dimensional morphologies are presented, as well as film matrices from organic polymers to inorganic layered oxides. The high potential and synergetic effects of these nanocomposites for biotechnology applications, photovoltaic, solar control, catalytic, photonic and sensor applications are demonstrated. This review also provides a basic level of understanding how nanocomposites are characterized and processed using different techniques and methods. The main objective of this review would be to provide guiding significance for the design of new high-performance nanocomposites based on transition metal atom clusters.

Engineering mesoporous silica nanoparticles for drug delivery: where are we after two decades?

The present review details a chronological description of the events that took place during the development of mesoporous materials, their different synthetic routes and their use as drug delivery systems. The outstanding textural properties of these materials quickly inspired their translation to the nanoscale dimension leading to mesoporous silica nanoparticles (MSNs). The different aspects of introducing pharmaceutical agents into the pores of these nanocarriers, together with their possible biodistribution and clearance routes, would be described here. The development of smart nanocarriers that are able to release a high local concentration of the therapeutic cargo on-demand after the application of certain stimuli would be reviewed here, together with their ability to deliver the therapeutic cargo to precise locations in the body. The huge progress in the design and development of MSNs for biomedical applications, including the potential treatment of different diseases, during the last 20 years will be collated here, together with the required work that still needs to be done to achieve the clinical translation of these materials. This review was conceived to stand out from past reports since it aims to tell the story of the development of mesoporous materials and their use as drug delivery systems by some of the story makers, who could be considered to be among the pioneers in this area.

Study on Corrosion Resistance and Biological Properties of the Double Glow Plasma Nb-Zr Biological Implantation Alloying Layers

In order to improve the corrosion resistance of implant materials and understand the corrosion mechanisms, we prepared a biomedical Nb-Zr alloying layer on 316L stainless steel using double-layer glow plasma surface-alloying technology and investigated the effects of gas pressures on its surface structure, mechanical properties, and corrosion behavior. In particular, the surface states of the substrate and alloying layers were investigated using 3D confocal micrographs, the water contact angle, and UV reflectance, which aims to study the effect of the surface quality on corrosion resistance and discuss the corrosion mechanisms. The results show that the working pressure has an effect on the current density, the sputtering amount of the alloying elements, and the diffusion process of the alloying elements during glow discharge. The Nb-Zr alloying layer prepared under a pressure of 40 Pa had a uniform and dense surface structure, and the distribution was island-like. A Nb-Zr alloying layer with a thickness of 15 μm was successfully obtained, including the diffusion layer and the deposition layer. Simultaneously, the elements Nb and Zr were gradually distributed along the depth, and a high Nb concentration formed in the Nb-Zr alloying layer. The solid solution formed by Zr in the Nb layer significantly improved the microhardness and corrosion resistance of the substrate. The Nb-Zr alloying layer prepared under a pressure of 40 Pa had the lowest corrosion current density and excellent corrosion resistance, which originated from the passive film formed by the Nb-Zr alloying layer that could inhibit the invasion of corrosive ions and improve the corrosion resistance. In addition, the Nb-Zr alloying layer could promote cell proliferation during long-term use and had good biocompatibility. Our study provides an efficient, high-quality processing method for the surface modification of biomedical metallic materials to form thicker Nb-Zr alloying layers as a cost-effective alternative to bulk Nb-based alloys.

Mesoporous nanosilica: A thromboprotective nanomaterial for biomedical applications

Nanosilica is widely employed in various biomedical applications because of their tailorable physiochemical properties and excellent biocompatibility. In the present study, we have evaluated interaction of nanosilica with important coagulation components, such as platelets, a highly sensitive cell found in the blood, and coagulation proteins. Mesoporous silica nanoparticles (MSNs) were prepared using sol-gel process and characterized by FESEM and TEM to find out the size and shape of the particles. Different platelet functional parameters including platelet adhesion, aggregation, activation, secretion, clot formation and clot retraction-based studies have been carried out to investigate the impact of synthesized nanosilica on the blood coagulation system. Besides, ROS generation and increase in intracellular calcium was also monitored as they play a pivotal role in regulating platelet functions. The complete detailed study revealed that MSNs neither has stimulatory action towards platelets nor do they show any effective interaction with coagulation proteins.

Design and development of biomimetic electrospun sulphonated polyether ether ketone nanofibrous scaffold for bone tissue regeneration applications: in vitro and in vivo study

Bone defect restoration remains challenging in orthopedic medical practices. In this study an attempt is carried out to probe the use of new biomimetic SPEEK (sulfonated polyether ether ketone) based nanofibrous scaffold to deliver amine functionalized hydroxyapatite nanoparticles loaded resveratrol for its potent functionality in osteogenic differentiation. SPEEK polymer with reactive functional group SO₃H was synthesized through process of sulphonation reaction. Amine functionalized nanoparticles with protonated amino groups revamp the molecular interaction by the formation of hydrogen bonds that in turn intensify the bioactivity of the nanofibrous scaffold. Osteoconductive functionalized nanohydroxyapatite enhances the cell proliferation and osteogenicity with improved cell attachment and spreading. The results of FT-IR, XRD, Carbon-Silica NMR and EDX analysis confirmed the amine functionalization of the hydroxyapatite nanoparticles. Surface morphological analysis of the fabricated nanofibers through SEM and AFM analysis shows vastly interconnected porous structure that mimics the bone extracellular matrix, which enhances the cell compatibility. Cell adhesion and live dead assay of the nanoscaffolds express less cytotoxicity. Mineralization and alkaline phosphatase assay establish the osteogenic differentiation of the nanofibrous scaffold. The in vitro biocompatibility studies reveal that the fabricated scaffold was osteo-compatible with MG63 cell lines. Hemocompatibility study further proved that the designed biomimetic nanofibrous scaffold was highly suitable for bone tissue engineering. The results of in vivo analysis in zebrafish model for the fabricated nanofibers demonstrated significant increase in the caudal fin regeneration indicating mineralization of osteoblast. Thus, the commending results obtained instigate the potentiality of the composite nanofibrous scaffold as an effective biomimetic substrate for bone tissue regeneration.

Integrated therapy platform of exosomal system: hybrid inorganic/organic nanoparticles with exosomes for cancer treatment

Recent studies have found that exosomes or extracellular vehicles (EVs) are associated with cancer metastasis, disease progression, diagnosis, and treatment, leading to a rapidly emerging area of exocrine vesicle research. Relying on the superior targeting function and bio-compatibility of exosomes, researchers have been able to deliver drugs to cancer stem cells deep within tumors in mouse models. Despite significant efforts made in this relatively new field of exosome research, progress has been held back by challenges such as inefficient separation methods, difficulties in characterization/tracking, and a lack of specific biomarkers. Therefore, current researches are devoted to combining nanomaterials with exosomes to improve these shortcomings. Adding inorganic/organic nanoparticles such as artificial liposomes and iron oxide can bring more drug options and various fluorescent or magnetic diagnostic possibilities to the exosome system. Moreover, the applications of exosomes need to be further evaluated under actual physiological conditions. This review article highlights the potential of exosome-biomimetic nanoparticles for their use as drug carriers to improve the efficacy of anticancer therapy.

Multifunctional Role of Silica in Pharmaceutical Formulations

Due to the high surface area, adjustable surface and pore structures, and excellent biocompatibility, nano- and micro-sized silica have certainly attracted the attention of many researchers in the medical fields. This review focuses on the multifunctional roles of silica in different pharmaceutical formulations including solid preparations, liquid drugs, and advanced drug delivery systems. For traditional solid preparations, it can improve compactibility and flowability, promote disintegration, adjust hygroscopicity, and prevent excessive adhesion. As for liquid drugs and preparations, like volatile oil, ethers, vitamins, and self-emulsifying drug delivery systems, silica with adjustable pore structures is a good adsorbent for solidification. Also, silica with various particle sizes, surface characteristics, pore structure, and surface modification controlled by different synthesis methods has gained wide attention owing to its unparalleled advantages for drug delivery and disease diagnosis. We also collate the latest pharmaceutical applications of silica sorted out by formulations. Finally, we point out the thorny issues for application and survey future trends pertaining to silica in an effort to provide a comprehensive overview of its future development in the medical fields. Graphical Abstract.

A Model for the Structure of Adsorbed Layers at Solid/Liquid Interfaces

Understanding the structure of adsorbed layers, including their composition (the mole fraction of sorbate, x_A) and thickness (d_al), is of great significance for revealing the nature of adsorption and guiding its applications. Many techniques have been used to estimate the structure of adsorbed layers of organics at solid/liquid interfaces. However, there is still a lack of feasible thermodynamic models to describe the correlation between the structure (more precisely, x_A and d_al) and the equilibrium adsorption amount (Γ_e). Herein, a thermodynamic model, called the dynamic bonding equilibrium (DBE) model, was developed on the basis of the adsorption equilibrium thermodynamics with an assumption that, at adsorption equilibrium, the sorbate and solvent within the adsorbed layer both exist in different bonding states. The DBE model relates x_A and d_al with Γ_e and thus can predict or describe the structure (x_A and d_al) of adsorbed layers from Γ_e. Its rationale was confirmed by the literature-reported adsorption data of organics, including surfactants, proteins, and polymers, on hydrophilic and hydrophobic surfaces in water. This work provides a feasible approach for obtaining information about the structure of adsorbed layers at solid/liquid interfaces.

Biogenic Nanosilica Synthesis Employing Agro-Waste Rice Straw and Its Application Study in Photocatalytic Degradation of Cationic Dye

The current study aims towards a holistic utilization of agro-waste rice straw (RS) to synthesize nanosilica (SiNPs) employing the sol–gel method. The effect of ashing temperature was evaluated for the synthesis process. X-ray diffraction demonstrated a broad spectrum at 21.22° for SiNPs obtained using RSA-600, signifying its amorphous nature, whereas crystalline SiNPs were synthesized using RSA-900. The EDX and FTIR spectra confirmed the significant peaks of Si and O for amorphous SiNPs, confirming their purity over crystalline SiNPs. FE-SEM and TEM micrographs indicated the spheroid morphology of the SiNPs with an average size of 27.47 nm (amorphous SiNPs) and 52.79 nm (crystalline SiNPs). Amorphous SiNPs possessed a high surface area of 226.11 m2/g over crystalline SiNPs (84.45 m2/g). The results obtained attest that the amorphous SiNPs possessed better attributes than crystalline SiNPs, omitting the need to incorporate high temperature. Photocatalytic degradation of methylene blue using SiNPs reflected that 66.26% of the dye was degraded in the first 10 min. The degradation study showed first-order kinetics with a half-life of 6.79 min. The cost-effective and environmentally friendly process offers a sustainable route to meet the increasing demand for SiNPs in industrial sectors. The study proposes a sustainable solution to stubble burning, intending towards zero waste generation, bioeconomy, and achieving the Sustainable Development Goals (SDGs), namely SDG 13(Climate Action), SDG 3(Good health and well-being), SDG 7(use of crop residues in industrial sectors) and SDG 8 (employment generation).

The Influence of Silica Nanoparticles on the Thermal and Mechanical Properties of Crosslinked Hybrid Composites

This paper presents the synthesis and physicochemical characterization of a new hybrid composite. Its main goals are evaluating the structure and studying the thermal and mechanical properties of the crosslinked polymeric materials based on varying chemical properties of the compounds. As an organic crosslinking monomer, bisphenol A glycerolate diacrylate (BPA.GDA) was used. Trimethoxyvinylsilane (TMVS) and N-vinyl-2-pyrrolidone (NVP) were used as comonomers and active diluents. The inorganic fraction was the silica in the form of nanoparticles (_NANOSiO₂). The hybrid composites were obtained by the bulk polymerization method using the UV initiator Irqacure 651 with a constant weight ratio of the tetrafunctional monomer BPA.GDA to TMVS or NVP (7:3 wt.%) and different wt.% of silica nanoparticles (0, 1, 3%). The proper course of polymerization was confirmed by the ATR/FTIR spectroscopy and SEM EDAX analysis. In the composites spectra the signals correspond to the C=O groups from NVP at 1672–1675 cm⁻¹, and the vibrations of Si–O–C and Si–O–Si groups at 1053–1100 cm⁻¹ from TMVS and _NANOSiO₂ are visible. Thermal stabilities of the obtained composites were studied by a differential scanning calorimetry DSC. Compared to NVP the samples with TMVS degraded in one stage (422.6–425.3 °C). The NVP-derived materials decomposed in three stages (three endothermic effects on the DSC curves). The addition of _NANOSiO₂ increases the temperature of composites maximum degradation insignificantly. Additionally, the Shore D hardness test was carried out with original metrological measurements of changes in diameter after indentation in relation to the type of material. The accuracy analysis of the obtained test results was based on a comparative analysis of graphical curves obtained from experimental tests. The values of the changes course of similarity in the examined factors, represented by those of characteristic coefficients were determined based on the Fréchet’s theory.

Carrageenan-based nano-hybrid materials for the mitigation of hazardous environmental pollutants

Fast industrialization and population growth are associated with the increased release of hazardous contaminants in the environment. These hazardous substances, including pharmaceutical, biomedical, personal-care products, heavy metals, endocrine-disrupters, and colorants, pollute the ecosystem by disturbing nature's balance. Nanotechnology has paved new horizons in biochemical engineering by designing novel approaches of integrating nanoscale science with biotechnology to construct improved quality materials for target uptake of pollutants. Recently, nanostructured materials have emerged as research and development frontiers owing to their excellent properties. The tailored designing of nanohybrids constructs with physicochemical alteration enables the nano-bioadsorbent with high target specificity and efficiency. The development of eco-friendly, biodegradable, cost-efficient, and biopolymer-based nanohybrid constructs is gaining attention to remove hazardous environmental pollutants. κ-carrageenan biopolymer is frequently used with different nanomaterials to design nanohybrid bio-adsorbents to remove various contaminants. Herein, the potentialities of carrageenan-based nanohybrid constructs in environmental remediation have been summarized. Different nanostructures, e.g., silica, non-magnetic/magnetic, carbon nanotubes/nanorods, nanoclay/nanomembrane, metal organic frameworks, graphene oxide, and other nanomaterials have been described in combination with carrageenan biopolymers focusing on environmental remediation.

Preparation and Machine-Learning Methods of Nacre-like Composites from the Self-Assembly of Magnetic Colloids Exposed to Rotating Magnetic Fields

Composite materials designed by nature, such as nacre, can display unique mechanical properties and have therefore been often mimicked by scientists. In this work, we prepared composite materials mimicking the nacre structure in two steps. First, we synthesized a silica gel skeleton with a layered structure using a bottom-up approach by modifying a sol-gel synthesis. Magnetic colloids were added to the sol solution, and a rotating magnetic field was applied during the sol-gel transition. When exposed to a rotating magnetic field, magnetic colloids organize in layers parallel to the plane of rotation of the field and template the growing silica phase, resulting in a layered anisotropic silica network mimicking the nacre's inorganic phase. Heat treatment has been applied to further harden the silica monoliths. The final nacre-inspired composite is created by filling the porous structure with a monomer, leading to a soft elastomer upon polymerization. Compression tests of the platelet-structured composite show that the mechanical properties of the nacre-like composite material far exceed those of nonstructured composite materials with an identical chemical composition. Increased toughness and a nearly 10-fold increase in Young's modulus were achieved. The natural brittleness and low elastic deformation of silica monoliths could be overcome by mimicking the natural architecture of nacre. Pattern recognition obtained with a classification of machine learning algorithms was applied to achieve a better understanding of the physical and chemical parameters that have the highest impact on the mechanical properties of the monoliths. Multivariate statistical analysis was performed to show that the structural control and the heat treatment have a very strong influence on the mechanical properties of the monoliths.

Silica Microspheres-in-Pores Composite Monoliths with Fluorescence and Potential for Water Remediation

Water pollution is a severe worldwide issue. Constructing advanced porous composite materials has been an efficient route to water remediation via adsorption. In this study, a unique microspheres-in-pores monolithic structure was fabricated. An emulsion-templated polymer monolith was first prepared and silica microspheres were subsequently formed in the porous polymer. A silica precursor was modified with a fluorescent dye and co-condensed with other precursors to fabricate porous composites with fluorescent properties, which were enhanced by the presence of Ag nanoparticles in the polymer matrix. This unique material showed good promise in water remediation by removing organic dyes and heavy metal ions from wastewater via a flowing filter or monolithic column separation.

Functionalized silica nanoparticles: classification, synthetic approaches and recent advances in adsorption applications

Nanotechnology is rapidly sweeping through all the vital fields of science and technology such as electronics, aerospace, defense, medicine, and catalysis. It involves the design, synthesis, characterization, and applications of materials and devices on the nanometer scale. At the nanoscale, physical and chemical properties differ from the properties of the individual atoms and molecules of bulk matter. In particular, the design and development of silica nanomaterials have captivated the attention of several researchers worldwide. The applications of hybrid silicas are still limited by the lack of control on the morphology and particle size. The ability to control both the size and morphology of the materials and to obtain nano-sized silica particles has broadened the spectrum of applications of mesoporous organosilicas and/or has improved their performances. On the other hand, adsorption is a widely used technique for the separation and removal of pollutants (metal ions, dyes, organics,...) from wastewater. Silica nanoparticles have specific advantages over other materials for adsorption applications due to their unique structural characteristics: a stable structure, a high specific surface area, an adjustable pore structure, the presence of silanol groups on the surface which allow easy modification, less environmental harm, simple synthesis, low cost, etc. Silica nanoparticles are potential adsorbents for pollutants. We present herein an overview of the different types of silica nanoparticles going from the definitions to properties, synthetic approaches and the mention of potential applications. We focus mainly on the recent advances in the adsorption of different target substances (metal ions, dyes and other organics).

Charged membranes based on spider silk-inspired nanofibers for comprehensive and continuous purification of wastewater

Creating a facile and efficient porous membrane for the comprehensive treatment of both insoluble and soluble pollutants from water is of great significance, yet remains challenging. Here, we present a facile strategy to prepare charged nanofibrous membranes assembled from spider silk-like humped SiO₂/polyamide 66 (PA66)/polyaniline (PANI) nanofibers by combing Plateau-Rayleigh instability-induced assembly andin situsynthesis. The obtained nanofibrous membranes possess micro/nanostructured surfaces with promising superhydrophilic and underwater superoleophobic property, which are attributed to the synergy of hierarchical roughness and hydrophilic matrix. Combined with the superwettability and the integrated property of submicron pore size, high porosity, and good pore interconnectivity, the membranes can separate various oil-in-water emulsions with a remarkable permeation flux of 5403 l m^-2h^-1and a high separation efficiency (total organic carbon content <5 mg l^-1). Moreover, attributed to the Laplace pressure difference and positive potential of the spindle-knotted nanofibers, the biomimetic nanofibrous membranes could remove the filter cake during separation. In addition, the membrane exhibits a remarkable adsorption-reduction capacity of hexavalent chromium. The synthesis of such attractive nanomaterials may provide new insights into the development of multifunctional separation materials for environmental applications.

Solid-phase extraction methods for nucleic acid separation. A review

The separation and purification of biomacromolecules such as nucleic acid is a perpetual topic in separation processes and bioengineering (fine chemicals, biopharmaceutical engineering, diagnostics, and biological characterization). In principle, the solid-phase extraction for nucleic acid exhibits efficient phase separation, low pollution risk, and small sample demand, compared to the conventional liquid-phase extraction. Herein, solid-phase extraction methods are systematically reviewed to outline research progress and explore additional solid-phase sorbents and devices for novel, flexible, and high-efficiency nucleic acid separation processes. The functional materials capture nucleic acid, magnetic and magnetic-free solid-phase extraction methods, separation device design and optimization, and high-throughput automatable applications based on high-performance solid-phase extraction are summarized. Finally, the current challenges and promising topics are discussed.