Catalytic Zirconium/Hafnium-Based Metal–Organic Frameworks

Metal-Organic Framework-Supported Mono Bipyridyl-Iron Hydroxyl Catalyst for Selective Benzene Hydroxylation into Phenol

Direct hydroxylation of benzene to phenol is more appealing in the industry for the economic and environmentally friendly phenol synthesis than the conventional cumene process. We have developed a UiO-metal-organic framework (MOF)-supported mono bipyridyl-Iron(II) hydroxyl catalyst [bpy-UiO-Fe(OH)2] for the selective benzene hydroxylation into phenol using H2O2 as the oxidant. The heterogeneous bpy-UiO-Fe(OH)2 catalyst showed high activity and remarkable phenol selectivity of 99%, giving the phenol mass-specific activity up to 1261 mmolPhOHgFe-1 h-1 at 60 °C. Bpy-UiO-Fe(OH)2 is significantly more active and selective than its homogeneous counterpart, bipyridine-Fe(OH)2. This enhanced catalytic activity of bpy-UiO-Fe(OH)2 over its homogeneous control is attributed to the active site isolation of the bpy-Fe(OH)2 moiety by the solid MOF that prevents intermolecular decomposition. Moreover, the exceptional selectivity of bpy-UiO-Fe(OH)2 in benzene to phenol conversion is originated via shape-selective catalysis, where the confined reaction space within the porous UiO-MOF prevents the formation of larger overoxidized products such as hydroquinone or benzoquinone, leading to the formation of only smaller-sized phenol after monohydroxylation of benzene. Spectroscopic and controlled experiments and theoretical calculations elucidated the reaction pathway, in which the in situ generated •OH radical mediated by bpy-UiO-FeII(OH)2 is the key species for benzene hydroxylation. This work underscores the significance of MOF-supported earth-abundant metal catalysts for sustainable production of fine chemicals.

Selective monoborylation of methane by metal-organic framework confined mononuclear pyridylimine-iridium(I) hydride

Chemoselective monoborylation of methane in high yield is a grand challenge. We have developed a metal-organic framework confined pyridylimine-iridium hydride catalyst, which is efficient in methane C-H borylation using bis(pinacolato)diboron to afford methyl boronic acid pinacol ester in 98% GC-yield at 130 °C with a TON of 196. Mechanistic investigation suggests the oxidative addition of methane to IrIII(Bpin)2(H) species to form IrV(Bpin)2(CH3)(H)2 as the turnover limiting step.

Ferrocene-functionalized zirconium-oxo clusters for achieving high-performance thermocatalytic redox reactions

The Zr(IV) ions are easily hydrolyzed to form oxides, which severely limits the discovery of new structures and applications of Zr-based compounds. In this work, three ferrocene (Fc)-functionalized Zr-oxo clusters (ZrOCs), Zr9Fc6, Zr10Fc6 and Zr12Fc8 were synthesized through inhibiting the hydrolysis of Zr(IV) ions, which show increased nuclearity and regular structural variation. More importantly, these Fc-functionalized ZrOCs were used as heterogeneous catalysts for the transfer hydrogenation of levulinic acid (LA) and phenol oxidation reactions for the first time, and displayed outstanding catalytic activity. In particular, Zr12Fc8 with the largest number of Zr active sites and Fc groups can achieve > 95% yield for LA-to-γ-valerolactone within 4 h (130 °C) and > 98% yield for 2,3,6-trimethylphenol-to-2,3,5-trimethyl-p-benzoquinone within 30 min (80 °C), showing the best catalytic performance. Catalytic characterization combined with theory calculations reveal that in the Fc-functionalized ZrOCs, the Zr active sites could serve as substrate adsorption sites, while the Fc groups could act as hydrogen transfer reagent or Fenton reagent, and thus achieve effectively intramolecular metal-ligand synergistic catalysis. This work develops functionalized ZrOCs as catalysts for thermal-triggered redox reactions.

Copper single-site engineering in MOF-808 membranes for improved water treatment

MOF-808, a metal-organic framework containing Zr6O8 clusters, can serve as a secure anchoring point for stabilizing copper single-sites with redox activity, thus making it a promising candidate for catalytic applications. In this study, we target the incorporation of Cu-MOF-808 into a mixed-matrix membrane for the degradation of tyrosol, an emerging endocrine-disrupting compound commonly found in water sources, through Fenton reactions, developing innovative technologies for water treatment. We successfully demonstrate the effectiveness of this approach by preparing catalytic membranes with minimal metal leaching, which is one of the primary challenges in developing copper-based Fenton heterogeneous catalysts. Furthermore, we utilized advanced synchrotron characterization techniques, combining X-ray absorption spectroscopy and pair distribution function analysis of X-ray total scattering, to provide evidence of the atomic structure of the catalytic copper sites within the membranes. Additionally, we observed the presence of weak interactions between the MOF-808 and the organic polymer, potentially explaining their enhanced stability.

Isoreticular Metal-Organic Frameworks Confined Mononuclear Ru-Hydrides Enable Highly Efficient Shape-Selective Hydrogenolysis of Polyolefins

Upcycling nonbiodegradable plastics such as polyolefins is paramount due to their ever-increasing demand and landfills after usage. Catalytic hydrogenolysis is highly appealing to convert polyolefins into targeted value-added products under mild reaction conditions compared with other methods, such as high-temperature incineration and pyrolysis. We have developed three isoreticular zirconium UiO-metal-organic frameworks (UiO-MOFs) node-supported ruthenium dihydrides (UiO-RuH2), which are efficient heterogeneous catalysts for hydrogenolysis of polyethylene at 200 °C, affording liquid hydrocarbons with a narrow distribution and excellent selectivity via shape-selective catalysis. UiO-66-RuH2 catalyzed hydrogenolysis of single-use low-density polyethylene (LDPE) produced a C12 centered narrow bell-shaped distribution of C8-C16 alkanes in >80% yield and 90% selectivity in the liquid phase. By tuning the pore sizes of the isoreticular UiO-RuH2 MOF catalysts, the distribution of the products could be systematically altered, affording different fuel-grade liquid hydrocarbons from LDPE in high yields. Our spectroscopic and theoretical studies and control experiments reveal that UiO-RuH2 catalysts enable highly efficient upcycling of plastic wastes under mild conditions owing to their unique combination of coordinatively unsaturated single-site Ru-active sites, uniform and tunable pores, well-defined porous structure, and superior stability. The kinetics and theoretical calculations also identify the C-C bond scission involving β-alkyl transfer as the turnover-limiting step.

Synthetic control of correlated disorder in UiO-66 frameworks

Changing the perception of defects as imperfections in crystalline frameworks into correlated domains amenable to chemical control and targeted design might offer opportunities for the design of porous materials with superior performance or distinctive behavior in catalysis, separation, storage, or guest recognition. From a chemical standpoint, the establishment of synthetic protocols adapted to control the generation and growth of correlated disorder is crucial to consider defect engineering a practicable route towards adjusting framework function. By using UiO-66 as experimental platform, we systematically explored the framework chemical space of the corresponding defective materials. Periodic disorder arising from controlled generation and growth of missing cluster vacancies can be chemically controlled by the relative concentration of linker and modulator, which has been used to isolate a crystallographically pure "disordered" reo phase. Cs-corrected scanning transmission electron microscopy is used to proof the coexistence of correlated domains of missing linker and cluster vacancies, whose relative sizes are fixed by the linker concentration. The relative distribution of correlated disorder in the porosity and catalytic activity of the material reveals that, contrarily to the common belief, surpassing a certain defect concentration threshold can have a detrimental effect.

A supported pyridylimine-cobalt catalyst for N-formylation of amines using CO2

N-Formylation of amines with CO2 as a cheap and non-toxic C1-feedstock and hydrosilane reducing agent is a practical and environment friendly method to synthesize formamides. This study describes an efficient and chemoselective mono-N-formylation of amines using CO2 and phenylsilane under mild conditions using a porous metal-organic framework (MOF)-supported single-site cobalt catalyst (pyrim-UiO-Co). The pyrim-UiO-Co MOF has a UiO-topology, and its organic linkers bear a pyridylimine ligated Co catalytic moiety. A wide range of aliphatic and aromatic amines are transformed into desired N-formamides in moderate to excellent yields under 1-5 bar CO2. Pyrim-UiO-Co is tolerant to various functional groups and could be recycled and reused at least 10 times. Mechanistic investigation using kinetic, spectroscopic and density functional theory studies suggests that the formylation of benzylamine proceeds sequentially via oxidative addition of PhSiH3 and CO2 insertion, followed by a turn-over limiting reaction with an amine. Our work highlights the importance of MOF-based Earth-abundant metal catalysts for the practical and eco-friendly synthesis of fine chemicals using cheap feedstocks.

Facet-controlled assembly for organizing metal-organic framework particles into extended structures

Metal-organic frameworks (MOFs) are crystalline porous materials characterized by their high porosity and chemical tailorability. To realize the full potential of synthesized MOFs, it is important to transform them from crystalline solid powders into materials with integrated morphologies and properties. One promising approach is facet-controlled assembly, which involves arranging individual crystalline MOF particles into ordered macroscale structures by carefully controlling the interactions between particles. The resulting assembled MOF structures maintain the characteristics of individual particles while also exhibiting improved properties overall. In this article, we emphasize the essential concepts of MOF assembly, highlighting the impact of building blocks, surface interactions, and Gibbs free energy on the assembly process. We systematically examine three methods of guiding facet-controlled MOF assembly, including spontaneous assembly, assembly guided by external forces, and assembly through surface modifications. Lastly, we offer outlooks on future advancements in the fabrication of MOF-based material and potential application exploration.

MOF-Based Chemiresistive Gas Sensors: Toward New Functionalities

The sensing performances of gas sensors must be improved and diversified to enhance quality of life by ensuring health, safety, and convenience. Metal-organic frameworks (MOFs), which exhibit an extremely high surface area, abundant porosity, and unique surface chemistry, provide a promising framework for facilitating gas-sensor innovations. Enhanced understanding of conduction mechanisms of MOFs has facilitated their use as gas-sensing materials, and various types of MOFs have been developed by examining the compositional and morphological dependences and implementing catalyst incorporation and light activation. Owing to their inherent separation and absorption properties and catalytic activity, MOFs are applied as molecular sieves, absorptive filtering layers, and heterogeneous catalysts. In addition, oxide- or carbon-based sensing materials with complex structures or catalytic composites can be derived by the appropriate post-treatment of MOFs. This review discusses the effective techniques to design optimal MOFs, in terms of computational screening and synthesis methods. Moreover, the mechanisms through which the distinctive functionalities of MOFs as sensing materials, heterostructures, and derivatives can be incorporated in gas-sensor applications are presented.

Anisotropic flexibility and rigidification in a TPE-based Zr-MOFs with scu topology

Tetraphenylethylene (TPE)-based ligands are appealing for constructing metal-organic frameworks (MOFs) with new functions and responsiveness. Here, we report a non-interpenetrated TPE-based scu Zr-MOF with anisotropic flexibility, that is, Zr-TCPE (H4TCPE = 1,1,2,2-tetra(4-carboxylphenyl)ethylene), remaining two anisotropic pockets. The framework flexibility is further anisotropically rigidified by installing linkers individually at specific pockets. By individually installing dicarboxylic acid L1 or L2 at pocket A or B, the framework flexibility along the b-axis or c-axis is rigidified, and the intermolecular or intramolecular motions of organic ligands are restricted, respectively. Synergistically, with dual linker installation, the flexibility is completely rigidified with the restriction of ligand motion, resulting in MOFs with enhanced stability and improved separation ability. Furthermore, in situ observation of the flipping of the phenyl ring and its rigidification process is made by 2H solid-state NMR. The anisotropic rigidification of flexibility in scu Zr-MOFs guides the directional control of ligand motion for designing stimuli-responsive emitting or efficient separation materials.

Evaluation of physical/mechanical properties of an experimental dental composite modified with a zirconium-based metal-organic framework (MOF) as an innovative dental filler

OBJECTIVES

This study aimed to modify an experimental dental composite using a synthesized nano-structured methacrylated zirconium-based MOF to enhance physical/mechanical properties.

METHODS

The previously known Uio-66-NH2 MOF was first synthesized and post-modified with Glycidyl Methacrylate (GMA). Fourier Transform Infrared (FTIR) Spectroscopy and CHNS analysis confirmed the post-modification reaction. The prepared filler was investigated by XRD, BET, SEM-EDS, and TEM. The experimental composite was prepared by mixing 60% wt. of resin matrix with 40% wt. of fillers, including silanized silica (SS) or Uio-66-NH-Me (UM). The experimental composites' depth of cure (DPC) was investigated in five groups (G1 =40% SS, G2 =30%SS+10%UM, G3 =20%SS+20%UM, G4 =10%SS+30%UM, G5 =40%UM). Then flexural strength(FS), Elastic Modulus(EM), solubility(S), water sorption(WS), degree of conversion(DC), polymerization shrinkage(PS), and polymerization stress(PSR) of the groups with DPC of more than 1 mm were investigated. Finally, the cytotoxicity of composites was studied.

RESULTS

The groups with more than 20% wt. UM, filler (G4, G5) had lesser than 1 mm DPC. Therefore, we investigated three groups' physical and mechanical properties with lower than 20% UM filler (G1-G3). Within these groups, G3 has a higher FS, EM (P < 0.05), and lower WS and S (P < 0.05). DC dropped in G2 and G3 compared to G1 (p < 0.05), but there was no significant difference between G2 and G3 (P = 0.594).

SIGNIFICANCE

This new filler is an innovative coupling-agent free filler and can be part of dental filler technology itself. It can also introduce a new group of dental fillers based on MOFs, but it still needs a complete investigation to be widely used.

Acidic Properties of Known and New COOH-Functionalized M(IV) Metal-Organic Frameworks

Herein, we report two new COOH-functionalized metal-organic frameworks (MOFs) of composition [M6 O4 (OH)6 (PMA)2 (H2 PMA)]×H2 O, M=Zr, Hf), denoted CAU-61, synthesized by using pyromellitic acid (H4 PMA), a tetracarboxylic acid, as the linker and acetic acid as the solvent. The structure was determined from powder X-ray diffraction data and one-dimensional inorganic building units are connected through tetracarboxylate as well as dicarboxylate linker molecules, resulting in highly stable microporous framework structures with limiting and maximum pore diameter of ∼3.6 and ∼5.0 Å, respectively, lined with -COOH groups. Thermal stabilities of up to 400 °C in air, chemical stability in water at pH 1 to 12 and water uptake of 17 mol/mol prompted us to study the proton exchange of the μ2 -OH, μ3 -OH of the IBU and -COOH groups of the linker by titration with LiOH. Comparison of the pKa values with three UiO-66 derivatives confirms distinct pKa value ranges and trends for the different acidic protons. Furthermore, the preparation of Zr-CAU-61 membranes and first results on permeation of dyes and ions in aqueous solutions are presented.

Synergy of Paired Brønsted-Lewis Acid Sites on Defects of Zr-MIL-140A for Methanol Dehydration

As a common defect-capping ligand in metal-organic frameworks (MOFs), the hydroxyl group normally exhibits Brønsted acidity or basicity, but the presence of inherent hydroxyl groups in the MOF structure makes it a great challenge to identify the exact role of defect-capping hydroxyl groups in catalysis. Herein, we used hydroxyl-free MIL-140A as the platform to generate terminal hydroxyl groups on defect sites via a continuous post-synthetic treatment. The structure and acidity of MIL-140A were properly characterized. The hydroxyl-contained MIL-140A-OH exhibited 4.6-fold higher activity than the pristine MIL-140A in methanol dehydration. Spectroscopic and computational investigations demonstrated that the reaction was initiated by the respective adsorption of two methanol molecules on the terminal-OH and the adjacent Zr vacancy. The dehydration of the adsorbed methanol molecules then occurred in the Brønsted-Lewis acid site co-participated associative pathway with the lowest energy barrier.

MOFganic Chemistry: Challenges and Opportunities for Metal-Organic Frameworks in Synthetic Organic Chemistry

Metal-organic frameworks (MOFs) are porous, crystalline solids constructed from organic linkers and inorganic nodes that have been widely studied for applications in gas storage, chemical separations, and drug delivery. Owing to their highly modular structures and tunable pore environments, we propose that MOFs have significant untapped potential as catalysts and reagents relevant to the synthesis of next-generation therapeutics. Herein, we outline the properties of MOFs that make them promising for applications in synthetic organic chemistry, including new reactivity and selectivity, enhanced robustness, and user-friendly preparation. In addition, we outline the challenges facing the field and propose new directions to maximize the utility of MOFs for drug synthesis. This perspective aims to bring together the organic and MOF communities to develop new heterogeneous platforms capable of achieving synthetic transformations that cannot be replicated by homogeneous systems.

A robust ultra-microporous cationic aluminum-based metal-organic framework with a flexible tetra-carboxylate linker

Al-based cationic metal-organic frameworks (MOFs) are uncommon. Here, we report a cationic Al-MOF, MIP-213(Al) ([Al₁₈(μ₂-OH)₂₄(OH₂)₁₂(mdip)₆]6Cl·6H₂O) constructed from flexible tetra-carboxylate ligand (5,5'-Methylenediisophthalic acid; H₄mdip). Its crystal structure was determined by the combination of three-dimensional electron diffraction (3DED) and high-resolution powder X-ray diffraction. The structure is built from infinite corner-sharing chains of AlO₄(OH)₂ and AlO₂(OH)₃(H₂O) octahedra forming an 18-membered rings honeycomb lattice, similar to that of MIL-96(Al), a scarce Al-polycarboxylate defective MOF. Despite sharing these structural similarities, MIP-213(Al), unlike MIL-96(Al), lacks the isolated μ₃-oxo-bridged Al-clusters. This leads to an ordered defective cationic framework whose charge is balanced by Cl^- sandwiched between two Al-trimers at the corner of the honeycomb, showing strong interaction with terminal H₂O coordinated to the Al-trimers. The overall structure is endowed by a narrow quasi-1D channel of dimension ~4.7 Å. The Cl^- in the framework restrains the accessibility of the channels, while the MOF selectively adsorbs CO₂ over N₂ and possesses high hydrolytic stability.

Pd-Coordinated Salinidol-Modified Mixed MOF: An Excellent Active Center for Efficient Nitroarenes Reduction and Selective Oxidation of Alcohols

Selective oxidation of active and inactive alcohol substrates and reduction of nitroarenes is a highly versatile conversion that remains a challenge in controlling functionality and adjustments in metal-organic frameworks (MOFs). On the other hand, it offers an attractive opportunity to expand their applications in designing the next generation of catalysts with improved performance. Herein, a novel mixed MOF consisting of supported 2-hydroxybenzamide (mixed MOF-salinidol) has been fabricated by post-synthetic modifications of mixed MOF. Subsequently, the prepared nanocomposites were modified to impart catalytic sites using palladium chloride ions mixed with MOF-salinidol/Pd (II). After successfully designing and structurally characterizing nanocomposites, we evaluated their activity in oxidizing primary and secondary alcohols using aerobic conditions with molecular oxygen and an air atmosphere. In addition, the stability of (mixed MOF-salinidol/Pd (II)) catalysts under catalytic conditions was also demonstrated by comparing the Fourier-transform infrared spectrum, scanning electron microscopy image, and ICP-OES method before and after catalysis. Based on the results, the active surface area of the synthesized nanocatalyst is large, which highlights its unique synergistic effect between post-synthetic modified MOF and Pd, and furthermore, the availability of catalytic sites from Pd, as demonstrated by outstanding catalytic activity.

High-Concentration Self-Assembly of Zirconium- and Hafnium-Based Metal-Organic Materials

Metal-organic frameworks (MOFs) are crystalline, porous solids constructed from organic linkers and inorganic nodes that are promising for applications in chemical separations, gas storage, and catalysis, among many others. However, a major roadblock to the widespread implementation of MOFs, including highly tunable and hydrolytically stable Zr- and Hf-based frameworks, is their benchtop-scalable synthesis, as MOFs are typically prepared under highly dilute (≤0.01 M) solvothermal conditions. This necessitates the use of liters of organic solvent to prepare only a few grams of MOF. Herein, we demonstrate that Zr- and Hf-based frameworks (eight examples) can self-assemble at much higher reaction concentrations than are typically utilized, up to 1.00 M in many cases. Combining stoichiometric amounts of Zr or Hf precursors with organic linkers at high concentrations yields highly crystalline and porous MOFs, as confirmed by powder X-ray diffraction (PXRD) and 77 K N₂ surface area measurements. Furthermore, the use of well-defined pivalate-capped cluster precursors avoids the formation of ordered defects and impurities that arise from standard metal chloride salts. These clusters also introduce pivalate defects that increase the exterior hydrophobicity of several MOFs, as confirmed by water contact angle measurements. Overall, our findings challenge the standard assumption that MOFs must be prepared under highly dilute solvothermal conditions for optimal results, paving the way for their scalable and user-friendly synthesis in the laboratory.

Fe3O4@iron-based metal-organic framework nanocomposite [Fe3O4@MOF (Fe) NC] as a recyclable magnetic nano-organocatalyst for the environment-friendly synthesis of pyrano[2,3-d]pyrimidine derivatives

Various pyrano[2,3-d]pyrimidines were synthesized by the multicomponent reaction of aldehydes, malononitrile, and acidic C-H compounds such as barbituric acid through the tandem Knoevenagel-Michael cyclocondensation pathway in an environmentally friendly reactive medium in the presence of a recoverable nanocomposite. This nanocomposite includes Fe₃O₄ nanoparticles placed on an organometallic framework. The synthesized Fe₃O₄@iron-based metal-organic framework nanocomposite was characterized using scanning electron microscopy, energy dispersive X-ray spectroscopy, X-ray powder diffraction, a vibrating sample magnetometer, and thermogravimetric analysis.

Unveiling the unprecedented catalytic capability of micro-sized Co-ZIF-L for the thermal decomposition of RDX by 2D-structure-induced mechanism reversal

Developing MOF-based catalysts with superior catalytic properties for the thermal decomposition of cyclotrimethylenetrinitramine (RDX) is significant for the application of novel and efficient combustion catalysts oriented to RDX-based propellants with excellent combustion performance. Herein, micro-sized Co-ZIF-L with a star-like morphology (SL-Co-ZIF-L) was found to exhibit unprecedented catalytic capability for the decomposition of RDX, which can lower the decomposition temperature of RDX by 42.9 °C and boost the heat release by 50.8%, superior to that of all the ever-reported MOFs and even ZIF-67, which has similar chemical composition but a much smaller size. In-depth mechanism study from both experimental and theoretical views reveals that the weekly interacted 2D layered structure of SL-Co-ZIF-L could activate the exothermic C-N fission pathway for the decomposition of RDX in the condensed phase, thus reversing the commonly advantageous N-N fission pathway and promoting the decomposition process in the low-temperature stage. Our study reveals the unusually superior catalytic capability of micro-sized MOF catalysts and sheds light on the rational structure design of catalysts used in micromolecule transformation reactions, typically the thermal decomposition of energetic materials.

Electrocatalytic Porphyrin/Phthalocyanine-Based Organic Frameworks: Building Blocks, Coordination Microenvironments, Structure-Performance Relationships

Metal-porphyrins or metal-phthalocyanines-based organic frameworks (POFs), an emerging family of metal-N-C materials, have attracted widespread interest for application in electrocatalysis due to their unique metal-N4 coordination structure, high conjugated π-electron system, tunable components, and chemical stability. The key challenges of POFs as high-performance electrocatalysts are the need for rational design for porphyrins/phthalocyanines building blocks and an in-depth understanding of structure-activity relationships. Herein, the synthesis methods, the catalytic activity modulation principles, and the electrocatalytic behaviors of 2D/3D POFs are summarized. Notably, detailed pathways are given for modulating the intrinsic activity of the M-N4 site by the microenvironments, including central metal ions, substituent groups, and heteroatom dopants. Meanwhile, the topology tuning and hybrid system, which affect the conjugation network or conductivity of POFs, are also considered. Furthermore, the representative electrocatalytic applications of structured POFs in efficient and environmental-friendly energy conversion areas, such as carbon dioxide reduction reaction, oxygen reduction reaction, and water splitting are briefly discussed. Overall, this comprehensive review focusing on the frontier will provide multidisciplinary and multi-perspective guidance for the subsequent experimental and theoretical progress of POFs and reveal their key challenges and application prospects in future electrocatalytic energy conversion systems.

Monitoring the Activation of Open Metal Sites in [FexM3-x(μ3-O)] Cluster-Based Metal-Organic Frameworks by Single-Crystal X-ray Diffraction

While trinuclear [FexM3-x(μ3-O)] cluster-based metal-organic frameworks (MOFs) have found wide applications in gas storage and catalysis, it is still challenging to identify the structure of open metal sites obtained through proper activations and understand their influence on the adsorption and catalytic properties. Herein, we use in situ variable-temperature single-crystal X-ray diffraction to monitor the structural evolution of [FexM3-x(μ3-O)]-based MOFs (PCN-250, M = Ni2+, Co2+, Zn2+, Mg2+) upon thermal activation and provide the snapshots of metal sites at different temperatures. The exposure of open Fe3+ sites was observed along with the transformation of Fe3+ coordination geometries from octahedron to square pyramid. Furthermore, the effect of divalent metals in heterometallic PCN-250 was studied for the purpose of reducing the activation temperature and increasing the number of open metal sites. The metal site structures were corroborated by X-ray absorption and infrared spectroscopy. These results will not only guide the pretreatment of [FexM3-x(μ3-O)]-based MOFs but also corroborate spectral and computational studies on these materials.

Elucidating correlated defects in metal organic frameworks using theory-guided inelastic neutron scattering spectroscopy

Metal organic frameworks (MOFs) that incorporate metal oxide cluster nodes, exemplified by UiO-66, have been widely studied, especially in terms of their deviations from the ideal, defect-free crystalline structures. Although defects such as missing linkers, missing nodes, and the presence of adventitious synthesis-derived node ligands (such as acetates and formates) have been proposed, their exact structures remain unknown. Previously, it was demonstrated that defects are correlated and span multiple unit cells. The highly specialized techniques used in these studies are not easily applicable to other MOFs. Thus, there is a need to develop new experimental and computational approaches to understand the structure and properties of defects in a wider variety of MOFs. Here, we show how low-frequency phonon modes measured by inelastic neutron scattering (INS) spectroscopy can be combined with density functional theory (DFT) simulations to provide unprecedented insights into the defect structure of UiO-66. We are able to identify and assign peaks in the fingerprint region (<100 cm^-1) which correspond to phonon modes only present in certain defective topologies. Specifically, this analysis suggests that our sample of UiO-66 consists of predominantly defect-free fcu regions with smaller domains corresponding to a defective bcu topology with 4 and 2 acetate ligands bound to the Zr₆O₈ nodes. Importantly, the INS/DFT approach provides detailed structural insights (e.g., relative positions and numbers of acetate ligands) that are not accessible with microscopy-based techniques. The quantitative agreement between DFT simulations and the experimental INS spectrum combined with the relative simplicity of sample preparation, suggests that this methodology may become part of the standard and preferred protocol for the characterization of MOFs, and, in particular, for elucidating the structure defects in these materials.

Hafnium(IV) Chemistry with Imide-Dioxime and Catecholate-Oxime Ligands: Unique {Hf5} and Metalloaromatic {Hf6}-Oxo Clusters Exhibiting Fluorescence

Hafnium(IV) molecular species have gained increasing attention due to their numerous applications ranging from high-resolution nanolithography, heterogeneous catalysis, and electronics to the design of molecule-based building blocks in metal-organic frameworks (MOFs), with applications in gas separation, sorption, luminescence sensing, and interim storage of radioactive waste. Despite great potential, their chemistry is relatively underdeveloped. Here, we use strong chelators (2Z-6Z)-piperidine-2,6-dione (H₃pidiox) and 2,3-dihydroxybenzaldehyde oxime (H₃dihybo) to synthesize the first ever reported pentanuclear {Hf₅/H₃pidiox} and hexanuclear {Hf₆/H₃dihybo} clusters (HfOCs). The {Hf₆} clusters adopt unique core structures [Hf₆^IV(μ₃-O)₂(μ-O)₃] with a trigonal-prismatic arrangement of the six hafnium atoms and have been characterized via single-crystal X-ray diffraction analysis, UV-vis spectroscopy in the solid state, NMR, fluorescence spectroscopy, and high-resolution mass spectrometry in solution. One-dimensional (1D) and two-dimensional (2D) ¹H NMR and mass spectroscopies reveal the exceptional thermodynamic stability of the HfOCs in solution. Interestingly, the conjunction of the oxime group with the catechol resulted in the remarkable reduction of the clusters' band gap, below 2.51 eV. Another prominent feature is the occurrence of pronounced metalloaromaticity of the triangular {Hf₃} metallic component revealed by its NICS_zz scan curve calculated by means of density functional theory (DFT). The NICS_zz(1) value of -44.6 ppm is considerably higher than the -29.7 ppm found at the same level of theory for the benzene ring. Finally, we investigated the luminescence properties of the clusters where 1 emits light in the violet region despite the lack of fluorescence of the free H₃pidiox ligand, whereas the {Hf₆} 3 shifts the violet-emitting light of the H₃dihybo to lower energy. DFT calculations show that this fluorescence behavior stems from ligand-centered molecular orbital transitions and that Hf^IV coordination has a modulating effect on the photophysics of these HfOCs. This work not only represents a significant milestone in the construction of stable low-band-gap multinuclear Hf^IV clusters with unique structural features and metal-centered aromaticity but also reveals the potential of Hf(IV) molecule-based materials with applications in sensing, catalysis, and electronic devices.

Engineering Single-Atom Sites into Pore-Confined Nanospaces of Porphyrinic Metal-Organic Frameworks for the Highly Efficient Photocatalytic Hydrogen Evolution Reaction

As a type of heterogeneous catalyst expected for the maximum atom efficiency, a series of single-atom catalysts (SACs) containing spatially isolated metal single atoms (M-SAs) have been successfully prepared by confining M-SAs in the pore-nanospaces of porphyrinic metal-organic frameworks (MOFs). The prepared MOF composites of M-SAs@Pd-PCN-222-NH₂ (M = Pt, Ir, Au, and Ru) display exceptionally high and persistent efficiency in the photocatalytic hydrogen evolution reaction with a turnover number (TON) of up to 21713 in 32 h and a beginning/lasting turnover frequency (TOF) larger than 1200/600 h^-1 based on M-SAs under visible light irradiation (λ ≥ 420 nm). The photo-/electrochemical property studies and density functional theory calculations disclose that the close proximity of the catalytically active Pt-SAs to the Pd-porphyrin photosensitizers with the confinement and stabilization effect by chemical binding could accelerate electron-hole separation and charge transfer in pore-nanospaces, thus promoting the catalytic H₂ evolution reaction with lasting effectiveness.

Cu-α-diimine Compounds Encapsulated in Porous Materials as Catalysts for Electrophilic Amination of Aromatic C-H Bonds

Electrophilic amination has emerged as a more environmentally benign approach to construct arene C-N bonds. However, heterogeneous catalysts remain largely unexplored in this area, even though their use could facilitate product purification and catalyst recovery. Here we investigate strategies to heterogenize a Cu(2,2'-bipyridine) catalyst for the amination of arenes lacking a directing group with hydroxylamine-O-sulfonic acid (HOSA). Besides immobilization of Cu on a metal-organic framework (MOF) or covalent organic framework (COF) with embedded 2,2'-bipyridines, a ship-in-a-bottle approach was followed in which the Cu complex is encapsulated in the pores of a zeolite. Recyclability and hot centrifugation tests show that zeolite Beta-entrapped Cu^II(2,2'-bipyridine) is superior in terms of stability. With N-methylmorpholine as a weakly coordinating, weak base, simple arenes, such as mesitylene, could be aminated with yields up to 59%, corresponding to a catalyst TON of 24. The zeolite could be used in three consecutive runs without a decrease in activity. Characterization of the catalyst by EPR and XAS showed that the active catalytic complex consisted of a site-isolated Cu^II species with one 2,2'-bipyridine ligand.

A comprehensive review on water remediation using UiO-66 MOFs and their derivatives

Metal-organic frameworks (MOFs) are a versatile class of porous materials offering unprecedented scope for chemical and structural tunability. On account of their synthetic versatility, tunable and exceptional host-guest chemistry they are widely utilized in many prominent water remediation techniques. However, some of the MOFs present low structural stabilities specifically in aqueous and harsh chemical conditions which impedes their potential application in the field. Among the currently explored MOFs, UiO-66 exhibits structural robustness and has gained immense scientific popularity. Built with a zirconium-terephthalate framework, the strong Zr-O bond coordination contributes to its stability in aqueous, chemical, and thermal conditions. Moreover, other exceptional features such as high surface area and uniform pore size add to the grand arena of porous nanomaterials. As a result of its stable nature, UiO-66 offers relaxed admittance towards various functionalization, including synthetic and post-synthetic modifications. Consequently, the adsorptive properties of these highly stable frameworks have been modulated by the addition of various functionalities. Moreover, due to the presence of catalytically active sites, the use of UiO-66 has also been extended towards the degradation of pollutants. Furthermore, to solve the practical handling issues of the crystalline powdered forms, UiO-66 has been incorporated into various membrane supports. The incorporation of UiO-66 in various matrices has enhanced the rejection, permeate flux, and anti-fouling properties of membranes. The combination of such exceptional characteristics of UiO-66 MOF has expanded its scope in targeted purification techniques. Subsequently, this review highlights the role of UiO-66 in major water purification techniques such as adsorption, photocatalytic degradation, and membrane separation. This comprehensive review is expected to shed light on the existing developments and guide the inexhaustible futuristic scope of UiO-66 MOF.

Capture Instead of Release: Defect-Modulated Radionuclide Leaching Kinetics in Metal-Organic Frameworks

Comparison of defect-controlled leaching-kinetics modulation of metal-organic frameworks (MOFs) and porous functionalized silica-based materials was performed on the example of a radionuclide and radionuclide surrogate for the first time, revealing an unprecedented readsorption phenomenon. On a series of zirconium-based MOFs as model systems, we demonstrated the ability to capture and retain >99% of the transuranic ²⁴¹Am radionuclide after 1 week of storage. We report the possibility of tailoring radionuclide release kinetics in MOFs through framework defects as a function of postsynthetically installed organic ligands including cation-chelating crown ether-based linkers. Based on comprehensive analysis using spectroscopy (EXAFS, UV-vis, FTIR, and NMR), X-ray crystallography (single crystal and powder), and theoretical calculations (nine kinetics models and structure simulations), we demonstrated the synergy of radionuclide integration methods, topological restrictions, postsynthetic scaffold modification, and defect engineering. This combination is inaccessible in any other material and highlights the advantages of using well-defined frameworks for gaining fundamental knowledge necessary for the advancement of actinide-based material development, providing a pathway for addressing upcoming challenges in the nuclear waste administration sector.

Comparative Studies on the Proton Conductivities of Hafnium-Based Metal-Organic Frameworks and Related Chitosan or Nafion Composite Membranes

Hafnium (Hf)-based UiO-66 series metal-organic frameworks (MOFs) have been widely studied on gas storage, gas separation, reduction reaction, and other aspects since they were first prepared in 2012, but there are few studies on proton conductivity. In this work, one Hf-based MOF, Hf-UiO-66-fum showing UiO-66 structure, also known as MOF-801-Hf, was synthesized at room temperature using cheap fumaric acid as the bridging ligand, and then imidazole units were successfully introduced into MOF-801-Hf to obatin a doped product, Im@MOF-801-Hf. Note that both MOF-801-Hf and Im@MOF-801-Hf demonstrate excellent thermal, water, and acid-base stabilities. Expectedly, the maximum proton conductivity (σ) of Im@MOF-801-Hf (1.46 × 10^-2 S·cm^-1) is nearly 4 times greater than that of MOF-801-Hf (3.98 × 10^-3 S·cm^-1) under 100 °C and 98% relative humidity (RH). To explore their possible practical application value, we doped them into chitosan (CS) or Nafion membranes as fillers, namely, CS/MOF-801-Hf-X, CS/Im@MOF-801-Hf-Y, and Nafion/MOF-801-Hf-Z (X, Y, and Z are the doping percentages of MOF in the membrane, respectively). Intriguingly, it was found that CS/MOF-801-Hf-6 and CS/Im@MOF-801-Hf-4 indicated the highest σ values of 1.73 × 10^-2 and 2.14 × 10^-2 S·cm^-1, respectively, under 100 °C and 98% RH and Nafion/MOF-801-Hf-9 also revealed a high σ value of 4.87 × 10^-2 S·cm^-1 under 80 °C and 98% RH, which showed varying degrees of enhancement compared to the original MOFs or pure CS and Nafion membranes. Our study illustrates that these Hf-based MOFs and related composite membranes offer great potential in electrochemical fields.

Computational Mechanism of Methyl Levulinate Conversion to γ-Valerolactone on UiO-66 Metal Organic Frameworks

Metal-organic frameworks (MOFs) are gaining importance in the field of biomass conversion and valorization due to their porosity, well-defined active sites, and broad tunability. But for a proper catalyst design, we first need detailed insight of the system at the atomic level. Herein, we present the reaction mechanism of methyl levulinate to γ-valerolactone on Zr-based UiO-66 by means of periodic density functional theory (DFT). We demonstrate the role of Zr-based nodes in the catalytic transfer hydrogenation (CTH) and cyclization steps. From there, we perform a computational screening to reveal key catalyst modifications to improve the process, such as node doping and linker exchange.

Mixed-Linker Strategy for the Construction of Metal-Organic Framework Combined with Dyes toward Alcohol Detection

Herein, a N-rich metal-organic framework (MOF) with four kinds of cages, Zn₄(ade)₂(TCA)₂(H₂O) (NENU-1000, Hade = adenine, H₃TCA = 4,4',4″-tricarboxytriphenylamine, NENU = Northeast Normal University), was prepared by the mixed-ligand strategy. Cationic dyes can be selectively absorbed by NENU-1000 at proper concentrations, but not neutral and anionic dyes, which perhaps can be assigned to the N-rich neutral framework of NENU-1000. When NENU-1000 was introduced to a relatively lower concentration of cationic dye solutions (e.g., rhodamine B or basic red 2), the colors of these systems faded quickly. Furthermore, the faded solutions can be used for the detection of methanol and other small alcohol molecules with either the naked eye or common UV-vis spectra. The effect of the length of carbon chain, the position of the -OH group, and the number of the hydroxyl group of the alcohols was explored for the color development rate. In addition, the performance of NENU-1000 in iodine sorption and release was also studied.

Leveraging Chiral Zr(IV)-Based Metal-Organic Frameworks To Elucidate Catalytically Active Rh Species in Asymmetric Hydrogenation Reactions

One of the most widely employed strategies to produce chiral molecules involves the asymmetric hydrogenation of functionalized olefins using rhodium catalysts. Despite their excellent performance, the exact identity of the active Rh species is still ambiguous as each site may plausibly feature one or two phosphorus ligands. In this work, we used a sequential postsynthetic modification approach to successfully incorporate single-site Rh species into a zirconium-based metal-organic framework comprised of chiral spinol-based ligands. These Rh species feature one phosphorus ligand per Rh, which contrasts with the molecular analogue that contains two phosphorus ligands per Rh site. Following extensive characterization of the Rh-monophosphorus material using techniques including solid-state NMR and extended X-ray absorption fine-structure (EXAFS) spectroscopy, we studied their catalytic performance in the asymmetric hydrogenations of enamides and α-dehydroamino acid esters and observed excellent yields and enantioselectivities (up to 99.9% ee). Notably, the Rh-monophosphorus catalyst is 5 times more active than the homogeneous Rh-biphosphorus control, which we attributed to the higher activity of the single-site Rh-monophosphorus species and the confined MOF cavities that can enrich reactants. In addition, we observed a unique topology-dependent behavior in which linker expansion leads to the formation of a novel Zr-MOF with a distinct 4,8-connected net that cannot be phosphorylated, presumably due to intense tensile strain and steric repulsion present within this framework. Finally, we demonstrate the utility of this single-site Rh-monophosphorus catalyst in the gram-scale synthesis of (R)-cinacalcet hydrochloride, a first-in-class drug in the therapy of secondary hyperparathyroidism and parathyroid carcinoma, with 99.1% ee.

MOF-enabled confinement and related effects for chemical catalyst presentation and utilization

A defining characteristic of nearly all catalytically functional MOFs is uniform, molecular-scale porosity. MOF pores, linkers and nodes that define them, help regulate reactant and product transport, catalyst siting, catalyst accessibility, catalyst stability, catalyst activity, co-catalyst proximity, composition of the chemical environment at and beyond the catalytic active site, chemical intermediate and transition-state conformations, thermodynamic affinity of molecular guests for MOF interior sites, framework charge and density of charge-compensating ions, pore hydrophobicity/hydrophilicity, pore and channel rigidity vs. flexibility, and other features and properties. Collectively and individually, these properties help define overall catalyst functional behaviour. This review focuses on how porous, catalyst-containing MOFs capitalize on molecular-scale confinement, containment, isolation, environment modulation, energy delivery, and mobility to accomplish desired chemical transformations with potentially superior selectivity or other efficacy, especially in comparison to catalysts in homogeneous solution environments.

Hierarchical porous metal–organic gels and derived materials: from fundamentals to potential applications

This review summarizes recent progress in the development and applications of metal–organic gels (MOGs) and their hybrids and derivatives dividing them into subclasses and discussing their synthesis, design and structure–property relationship.

A Cd(ii)-organic framework as a highly sensitive and rapid fluorometric sensor for ascorbic acid in aqueous medium

A new Cd(ii) MOF was used as a fluorometric sensor for ascorbic acid in water, fruits, vegetables and human urine.

Zirconium oxo clusters as discrete molecular catalysts for the direct amide bond formation

A discrete dodecanuclear Zr oxo cluster catalyzed the direct formation of amide bonds without the need of water scavenging or dry reactions conditions showcasing the potential of these molecular clusters to become a new class of efficient catalysts.

Visible-light-driven sonophotocatalysis for enhanced Cr(VI) reduction based on mixed-linker zirconium-porphyrin MOFs

In this study, we synthesized and characterized two mixed-linker zirconium-porphyrin metal-organic frameworks, PCN-134 and PCN-138 which constructed from tetratopic light harvesting TCPP ligand and tritopic BTB/TBTB ligand (TCPP = trakis(4-carboxyphenyl)porphyrin),...

Hierarchically porous single catalyst Ru/HPW/UiO-66 with synergistic acid/metal sites for one-pot catalytic synthesis of γ–Valerolactone

γ-valerolactone (GVL) is an important lignocellulosic platform molecule with huge potential for various industrial and chemical applications, which is usually produced by using Levulinic acid (LA) or its esters as...

N-Formylation of amines utilizing CO2 by a heterogeneous metal–organic framework supported single-site cobalt catalyst

Single-site cobalt-hydride supported on oxo-nodes of a porous aluminium metal–organic framework is a chemoselective and reusable catalyst for N-formylation of amines using CO2.

Ethylene polymerization with a crystallographically well-defined metal–organic framework supported catalyst

Crystallographic characterization of a heterogeneous ethylene polymerization catalyst elucidates a chromium–carbon bond after alkyl aluminum activation and provides mechanistic insights.

Chemoselective and Tandem Reduction of Arenes Using a Metal-Organic Framework-Supported Single-Site Cobalt Catalyst

The development of heterogeneous, chemoselective, and tandem catalytic systems using abundant metals is vital for the sustainable synthesis of fine and commodity chemicals. We report a robust and recyclable single-site cobalt-hydride catalyst based on a porous aluminum metal-organic framework (DUT-5 MOF) for chemoselective hydrogenation of arenes. The DUT-5 node-supported cobalt(II) hydride (DUT-5-CoH) is a versatile solid catalyst for chemoselective hydrogenation of a range of nonpolar and polar arenes, including heteroarenes such as pyridines, quinolines, isoquinolines, indoles, and furans to afford cycloalkanes and saturated heterocycles in excellent yields. DUT-5-CoH exhibited excellent functional group tolerance and could be reusable at least five times without decreased activity. The same MOF-Co catalyst was also efficient for tandem hydrogenation-hydrodeoxygenation of aryl carbonyl compounds, including biomass-derived platform molecules such as furfural and hydroxymethylfurfural to cycloalkanes. In the case of hydrogenation of cumene, our spectroscopic, kinetic, and density functional theory (DFT) studies suggest the insertion of a trisubstituted alkene intermediate into the Co-H bond occurring in the turnover limiting step. Our work highlights the potential of MOF-supported single-site base-metal catalysts for sustainable and environment-friendly industrial production of chemicals and biofuels.

Generating Catalytic Sites in UiO-66 through Defect Engineering

UiO-66 is regarded as an epitome of metal-organic frameworks (MOFs) because of its stability. Defect engineering has been used as a toolbox to alter the performance of MOFs. UiO-66 is among the most widely explored MOFs because of its capability to bear a high number of defects without undergoing structural collapse. Several representative works in the field of MOF-based defect engineering are available based on UiO-66. In this review, more emphasis is given toward the construction of catalytic sites by engineering defects in UiO-66 as a representative including all the detailed synthesis procedures for inducing defects, and the characterization techniques used to analyze these defects in UiO-66 are discussed. Furthermore, a comprehensive review for the defects themselves and the support using defects in catalysis is provided to accentuate the importance of defect engineering.

N-Heterocyclic carbenes and their precursors in functionalised porous materials

Though N-heterocyclic carbenes (NHCs) have emerged as diverse and powerful discrete functional molecules in pharmaceutics, nanotechnology, and catalysis over decades, the heterogenization of NHCs and their precursors for broader applications in porous materials, like metal-organic frameworks (MOFs), porous coordination polymers (PCPs), covalent-organic frameworks (COFs), porous organic polymers (POPs), and porous organometallic cages (POMCs) was not extensively studied until the last ten years. By de novo or post-synthetic modification (PSM) methods, myriads of NHCs and their precursors containing building blocks were designed and integrated into MOFs, PCPs, COFs, POPs and POMCs to form various structures and porosities. Functionalisation with NHCs and their precursors significantly expands the scope of the potential applications of porous materials by tuning the pore surface chemical/physical properties, providing active sites for binding guest molecules and substrates and realizing recyclability. In this review, we summarise and discuss the recent progress on the synthetic methods, structural features, and promising applications of NHCs and their precursors in functionalised porous materials. At the end, a brief perspective on the encouraging future prospects and challenges in this contemporary field is presented. This review will serve as a guide for researchers to design and synthesize more novel porous materials functionalised with NHCs and their precursors.

Aqueous Stability of Zirconium Clusters, Including the Zr(IV) Hexanuclear Hydrolysis Complex [Zr6O4(OH)4(H2O)24]12+, from Density Functional Theory

Framework materials constitute a broad family of solids that range from zeolites and metal-organic frameworks (MOFs) to coordination polymers. The synthesis of such network structures typically rely on precursor molecular building blocks. As an example, the UiO-66 MOF series is constructed of hexanuclear [Zr₆O₄(OH)₄(CO₂)₁₂] cluster nodes and linear carboxylate linkers. Unfortunately, these Zr MOF cluster nodes cannot currently be manufactured in a sustainable way, motivating a search for "green" alternative synthesis methods. Stabilizing the hexanuclear Zr(IV) cluster (i.e., the hexamer, {Zr₆¹²⁺}) without the use of organic ligation would enable the use of environmentally friendly solvents such as water. The Zr(IV) tetranuclear cluster (i.e., the tetramer, {Zr₄⁸⁺}) can be stabilized in solution with or without organic ligands, yet the hexamer has yet to be synthesized without supporting ligands. The reasons why certain zirconium clusters are favored in aqueous solution over others are not well understood. This study reports the relative thermodynamic instability of the hypothetical hexamer {Zr₆¹²⁺} compared to the ubiquitous {Zr₄⁸⁺} tetramer. Density functional theory calculations were performed to obtain the hydrolysis Gibbs free energy of these species and used to construct Zr Pourbaix diagrams that illustrate the effects of electrochemical potential, pH, and Zr(IV) concentration. It was found that the aqueous {Zr₆¹²⁺} hexamer is ∼17.8 kcal/mol less stable than the aqueous {Zr₄⁸⁺} tetramer at pH = 0, V = 0, and [Zr(IV)] = 1 M, which is an energy difference on the order of counterion interactions. Electronic structure analyses were used to explore trends in the highest occupied molecular orbital-lowest unoccupied molecular orbital gap, frontier molecular orbitals, and electrostatic potential distribution of these clusters. The evidence suggests that the aqueous {Zr₆¹²⁺} hexamer may be promoted with more strategic syntheses incorporating minimal ligands and counterions.

Low-Valent Metal Ions as MOF Pillars: A New Route Toward Stable and Multifunctional MOFs

PCM-102 is a new organophosphine metal-organic framework (MOF) featuring diphosphine pockets that consist of pairs of offset trans-oriented P(III) donors. Postsynthetic addition of M(I) salts (M = Cu, Ag, Au) to PCM-102 induces single-crystal to single-crystal transformations and the formation of trans-[P₂M]⁺ solid-state complexes (where P = framework-based triarylphosphines). While the unmetalated PCM-102 has low porosity, the addition of secondary Lewis acids to install rigid P-M-P pillars is shown to dramatically increase both stability and selective gas uptake properties, with N₂ Brunauer-Emmett-Teller surface areas >1500 m² g^-1. The Ag(I) analogue can also be obtained via a simple, one-pot peri-synthetic route and is an ideal sacrificial precursor for materials with mixed bimetallic M^A/M^B pillars via postsynthetic, solvent-assisted metal exchange. Notably, the M-PCM-102 family of MOFs contain periodic trans-[P₂M]⁺ sites that are free of counter anions, unlike traditional analogous molecular complexes, since the precursor PCM-102 MOF is monoanionic, enabling access to charge-neutral metal-pillared materials. Four M-PCM-102 materials were evaluated for the separation of C2 hydrocarbons. The separation performance was found to be tunable based on the metal(s) incorporated, and density functional theory was employed to elucidate the nature of the unusual observed sorption preference, C₂H₂ > C₂H₆ > C₂H₄.

Zr-MOFs for CF4/CH4, CH4/H2, and CH4/N2 separation: towards the goal of discovering stable and effective adsorbents

Zirconium metal-organic frameworks (MOFs) can be promising adsorbents for various applications as they are highly stable in different chemical environments. In this work, a collection of Zr-MOFs comprised of more than 100 materials is screened for CF₄/CH₄, CH₄/H₂, and CH₄/N₂ separations using atomistic-level simulations. The top three MOFs for the CF₄/CH₄ separation are identified as PCN-700-BPDC-TPDC, LIFM-90, and BUT-67 exhibiting CF₄/CH₄ adsorption selectivities of 4.8, 4.6, and 4.7, CF₄ working capacities of 2.0, 2.0, and 2.1 mol kg^-1, and regenerabilities of 85.1, 84.2, and 75.7%, respectively. For the CH₄/H₂ separation, MOF-812, BUT-67, and BUT-66 are determined to be the top performing MOFs demonstrating CH₄/H₂ selectivities of 61.6, 36.7, and 46.2, CH₄ working capacities of 3.0, 4.1, and 3.4 mol kg^-1, and CH₄ regenerabilities of 70.7, 82.7, and 74.7%, respectively. Regarding the CH₄/N₂ separation, BUT-67, Zr-AbBA, and PCN-702 achieving CH₄/N₂ selectivities of 4.5, 3.4, and 3.8, CH₄ working capacities of 3.6, 3.9, and 3.5 mol kg^-1, and CH₄ regenerabilities of 81.1, 84.0, and 84.5%, in successive order, show the best overall separation performances. To further elucidate the adsorption in top performing adsorbents, the adsorption sites in these materials are analyzed using radial distribution functions and adsorbate density profiles. Finally, the water affinities of Zr-MOFs are explored to comment on their practical use in real gas separation applications. Our findings may inspire future studies probing the adsorption/separation mechanisms and performances of Zr-MOFs for different gases.