Rh(CAAC)-Catalyzed Arene Hydrogenation: Evidence for Nanocatalysis and Sterically Controlled Site-Selective Hydrogenation

An isolable, chelating bis[cyclic (alkyl)(amino)carbene] stabilizes a strongly bent, dicoordinate Ni(0) complex

Chelating ligands have had a tremendous impact in coordination chemistry and catalysis. Notwithstanding their success as strongly σ-donating and π-accepting ligands, to date no chelating bis[cyclic (alkyl)(amino)carbenes] have been reported. Herein, we describe a chelating, C2-symmetric bis[cyclic (alkyl)(amino)carbene] ligand, which was isolated as a racemic mixture. The isolation and structural characterization of its isostructural, pseudotetrahedral complexes with iron, cobalt, nickel, and zinc dihalides featuring eight-membered metallacycles demonstrates the binding ability of the bis(carbene). Reduction of the nickel(II) dibromide with potassium graphite produces a dicoordinate nickel(0) complex that features one of the narrowest angles measured in any unsupported dicoordinate transition metal complexes.

Broad Survey of Selectivity in the Heterogeneous Hydrogenation of Heterocycles

A broad survey of heterogeneous hydrogenation catalysts has been conducted for the reduction of heterocycles commonly found in pharmaceuticals. The comparative reactivity of these substrates is reported as a function of catalyst, temperature, and hydrogen pressure. This analysis provided several catalysts with complementary reactivity between substrates. We then explored a series of bisheterocyclic substrates that provided an intramolecular competition of heterocycle hydrogenation reactivity. In several cases, complete selectivity could be achieved for reduction of one heterocycle and isolated yields are reported. A general trend in reactivity is inferred in which quinoline is the most reactive, followed by pyrazine, then pyrrole and with pyridine being the least reactive.

Continuous Flow Hydrogenation of Lignin-model Aromatic Compounds over Carbon-supported Noble Metals

An efficient continuous-flow (CF) protocol was designed for the hydrogenation of lignin-derived aromatics to the corresponding cycloalkanes derivatives. A parametric analysis of the reaction was carried out by tuning the temperature, the H2 pressure and the flow rate, and using diphenyl ether (DPE) as a model substrate, commercial Ru/C as a catalyst, and isopropanol as a solvent: at 25 °C, 50 bar H2 , and a flow rate of 0.1 mL min-1 , dicyclohexyl ether was achieved in an 86 % selectivity, at quantitative conversion. By-products from the competitive C-O bond cleavage of DPE, cyclohexanol and cyclohexane, did not exceed 14 % in total. Remarkably, prolonged experiments demonstrated an excellent stability of the catalyst whose performance was unaltered for up to 420 min of time-of-stream. A substrate scope evaluation proved that under the same conditions used for DPE, a variety of substrates including alkoxy-, allyl-, and carbonyl-functionalized phenols, biphenyl, aryl benzyl- and phenethyl ethers (10 examples) yielded the ring-hydrogenated products with selectivity up to 99 % at complete conversion.

cis-Selective Hydrogenation of Aryl Germanes: A Direct Approach to Access Saturated Carbo- and Heterocyclic Germanes

A catalytic approach of synthesizing the cis-selective saturated carbo- and heterocyclic germanium compounds (3D framework) is reported via the hydrogenation of readily accessible aromatic germanes (2D framework). Among the numerous catalysts tested, Nishimura's catalyst (Rh2O3/PtO2·H2O) exhibited the best hydrogenation reactivity with an isolated yield of up to 96%. A broad range of substrates including the synthesis of unprecedented saturated heterocyclic germanes was explored. This selective hydrogenation strategy could tolerate several functional groups such as -CF3, -OR, -F, -Bpin, and -SiR3 groups. The synthesized products demonstrated the applications in coupling reactions including the newly developed strategy of aza-Giese-type addition reaction (C-N bond formation) from the saturated cyclic germane product. These versatile motifs can have a substantial value in organic synthesis and medicinal chemistry as they show orthogonal reactivity in coupling reactions while competing with other coupling partners such as boranes or silanes, acquiring a three-dimensional structure with high stability and robustness.

Homogeneous Dearomative Hydrogenation with a Co/P4 N2 Catalyst: A Nucleophilic Approach

Arene hydrogenation is the most straightforward method to prepare carbo- and heterocycles. However, the high resonance energy prevents aromatic substrates from hydrogenation. Herein the homogeneous, nucleophilic hydrogenation of less electron-rich arenes and heteroarenes is reported. The Co(P₄ N₂ )H species that has been demonstrated to be a strong hydride donor could deliver a hydride ion to the cyano (hetero)arene substrates. Deuterium labeling experiments supported a Michael-type reaction pathway. Theoretical analyses have been conducted to investigate the hydricity of the catalytically active CoH species and the electrophilicity of the arene substrates. An outlook for the synthesis of more challenging substituted benzenes was proposed based on the in silico modification of the CoH species.

Cp* non-innocence and the implications of (η4-Cp*H)Rh intermediates in the hydrogenation of CO2, NAD+, amino-borane, and the Cp* framework - a computational study

In hydrogenation mediated by half-sandwich complexes of Rh, Cp*Rh(III)-H intermediates are critical hydride-delivery agents. For bipyridine-supported complexes, a unique transformation named 'Cp* non-innocence' leads to the appearance of (Cp*H)Rh(I) intermediates, which are purported to exhibit enhanced hydride-delivery capabilities. In this work, DFT calculations performed to compare the role of these complexes in hydrogenation reveal that (Cp*H)Rh(I) intermediates do not compete with the conventional pathway (involving Cp*Rh(III)-H); instead they can lead to sequential hydrogenation of the Cp* framework, and potentially, catalyst degradation. Thus, caution is warranted when invoking the truly homogeneous nature of hydrogenation catalysis mediated by this popular class of complexes.

Phosphine-Functionalized Core-Crosslinked Micelles and Nanogels with an Anionic Poly(styrenesulfonate) Shell: Synthesis, Rhodium(I) Coordination and Aqueous Biphasic Hydrogenation Catalysis

Stable latexes containing unimolecular amphiphilic core-shell star-block polymers with a triphenylphosphine(TPP)-functionalized hydrophobic core and an outer hydrophilic shell based on anionic styrenesulfonate monomers have been synthesized in a convergent three-step strategy by reversible addition-fragmentation chain-transfer (RAFT) polymerization, loaded with [RhCl(COD)]₂ and applied to the aqueous biphasic hydrogenation of styrene. When the outer shell contains sodium styrenesulfonate homopolymer blocks, treatment with a toluene solution of [RhCl(COD)]₂ led to undesired polymer coagulation. Investigation of the interactions of [RhCl(COD)]₂ and [RhCl(COD)(PPh₃)] with smaller structural models of the polymer shell functions, namely sodium p-toluenesulfonate, sodium styrenesulfonate, and a poly(sodium styrenesulfonate) homopolymer in a biphasic toluene/water medium points to the presence of equilibrated Rh-sulfonate interactions as the cause of coagulation by inter-particle cross-linking. Modification of the hydrophilic shell to a statistical copolymer of sodium styrenesulfonate and poly(ethylene oxide) methyl ether methacrylate (PEOMA) in a 20:80 ratio allowed particle loading with the generation of core-anchored [RhCl(COD)TPP] complexes. These Rh-loaded latexes efficiently catalyze the aqueous biphasic hydrogenation of neat styrene as a benchmark reaction. The catalytic phase could be recovered and recycled, although the performances in terms of catalyst leaching and activity evolution during recycles are inferior to those of equivalent nanoreactors based on neutral or polycationic outer shells.

Synthesis of Saturated N-Heterocycles via a Catalytic Hydrogenation Cascade

Saturated N-heterocycles are prominent motifs found in various natural products and pharmaceuticals. Despite the increasing interest in this class of compounds, the synthesis of saturated bicyclic azacycles requires tedious multi-step syntheses. Herein, we present a one-pot protocol for the synthesis of octahydroindoles, decahydroquinolines, and octahydroindolizines through a cascade reaction.

An Adaptive Rhodium Catalyst to Control the Hydrogenation Network of Nitroarenes

An adaptive catalytic system that provides control over the nitroarene hydrogenation network to prepare a wide range of aniline and hydroxylamine derivatives is presented. This system takes advantage of a delicate interplay between a rhodium(III) center and a Lewis acidic borane introduced in the secondary coordination sphere of the metal. The high chemoselectivity of the catalyst in the presence of various potentially vulnerable functional groups and its readiness to be deployed at a preparative scale illustrate its practicality. Mechanistic studies and density functional theory (DFT) methods were used to shed light on the mode of functioning of the catalyst and elucidate the origin of adaptivity. The competition for interaction with boron between a solvent molecule and a substrate was found crucial for adaptivity. When operating in THF, the reduction network stops at the hydroxylamine platform, whereas the reaction can be directed to the aniline platform in toluene.

Access to Unexplored 3D Chemical Space: cis ‐Selective Arene Hydrogenation for the Synthesis of Saturated Cyclic Boronic Acids

A new class of saturated boron‐incorporated cyclic molecules has been synthesized employing an arene‐hydrogenation methodology. cis‐Selective hydrogenation of easily accessible, and biologically important molecules comprising benzoxaborole, benzoxaborinin, and benzoxaboripin derivatives is reported. Among the various catalysts tested, rhodium cyclic(alkyl)(amino)carbene [Rh‐CAAC] (1) pre‐catalyst revealed the best hydrogenation activity confirming turnover number up to 1400 with good to high diastereoselectivity. A broad range of functional groups was tolerated including sensitive substituents such as −F, −CF₃, and −silyl groups. The utility of the synthesized products was demonstrated by the recognition of diols and sugars under physiological conditions. These motifs can have a substantial importance in medicinal chemistry as they possess a three‐dimensional structure, are highly stable, soluble in water, form hydrogen bonds, and interact with diols and sugars.

Molybdenum-Catalyzed Asymmetric Hydrogenation of Fused Arenes and Heteroarenes

The synthesis of enantioenriched molybdenum precatalysts for the asymmetric hydrogenation of substituted quinolines and naphthalenes is described. Three classes of pincer ligands with chiral substituents were evaluated as supporting ligands in the molybdenum-catalyzed hydrogenation reactions, where oxazoline imino(pyridine) chelates were identified as optimal. A series of 2,6-disubstituted quinolines was hydrogenated to enantioenriched decahydroquinolines with high diastereo- and enantioselectivities. For quinoline derivatives, selective hydrogenation of both the carbocycle and heterocycle was observed depending on the ring substitution. Spectroscopic and mechanistic studies established molybdenum η⁶-arene complexes as the catalyst resting state and that partial hydrogenation arises from dissociation of the substrate from the coordination sphere of molybdenum prior to complete reduction. A stereochemical model is proposed based on the relative energies of the respective coordination of the prochiral faces of the arene determined by steric interactions between the substrate and the chiral ligand, rather than through precoordination by a heteroatom.

Recent advances in the domain of Cyclic (alkyl)(amino) carbenes

Isolation of cyclic (alkyl) amino carbenes (cAACs) in 2005 has been a major achievement in the field of stable carbenes due to their better electronic properties. cAACs and bicyclic(alkyl)(amino)carbene (BicAAC) in essence are the most electrophilic as well as nucleophilic carbenes are known till date. Due to their excellent electronic properties in terms of nucleophilic and electrophilic character, cAACs have been utilized in different areas of chemistry, including stabilization of low valent main group and transition metal species, activation of small molecules, and catalysis. The applications of cAACs in catalysis have opened up new avenues of research in the field of cAAC chemistry. This review summarizes the major results of cAAC chemistry published until August 2021.

Pyridine dicarbanion-bonded Ag13 organometallic nanoclusters: synthesis and on-surface oxidative coupling reaction

Unprecedented pyridine dicarbanion-bonded Ag13 nanoclusters were constructed according to a macrocycle-involved two-step synthetic protocol.

Chemoselective and Tandem Reduction of Arenes Using a Metal-Organic Framework-Supported Single-Site Cobalt Catalyst

The development of heterogeneous, chemoselective, and tandem catalytic systems using abundant metals is vital for the sustainable synthesis of fine and commodity chemicals. We report a robust and recyclable single-site cobalt-hydride catalyst based on a porous aluminum metal-organic framework (DUT-5 MOF) for chemoselective hydrogenation of arenes. The DUT-5 node-supported cobalt(II) hydride (DUT-5-CoH) is a versatile solid catalyst for chemoselective hydrogenation of a range of nonpolar and polar arenes, including heteroarenes such as pyridines, quinolines, isoquinolines, indoles, and furans to afford cycloalkanes and saturated heterocycles in excellent yields. DUT-5-CoH exhibited excellent functional group tolerance and could be reusable at least five times without decreased activity. The same MOF-Co catalyst was also efficient for tandem hydrogenation-hydrodeoxygenation of aryl carbonyl compounds, including biomass-derived platform molecules such as furfural and hydroxymethylfurfural to cycloalkanes. In the case of hydrogenation of cumene, our spectroscopic, kinetic, and density functional theory (DFT) studies suggest the insertion of a trisubstituted alkene intermediate into the Co-H bond occurring in the turnover limiting step. Our work highlights the potential of MOF-supported single-site base-metal catalysts for sustainable and environment-friendly industrial production of chemicals and biofuels.

Asymmetric Full Saturation of Vinylarenes with Cooperative Homogeneous and Heterogeneous Rhodium Catalysis

Homogeneous and heterogeneous catalyzed reactions can seldom operate synergistically under the same conditions. Here we communicate the use of a single rhodium precursor that acts in both the homogeneous and heterogeneous phases for the asymmetric full saturation of vinylarenes that, to date, constitute an unmet bottleneck in the field. A simple asymmetric hydrogenation of a styrenic olefin, enabled by a ligand accelerated effect, accounted for the facial selectivity in the consecutive arene hydrogenation. Tuning the ratio between the phosphine ligand and the rhodium precursor controlled the formation of homogeneous and heterogeneous catalytic species that operate without interference from each other. The system is flexible in terms of both the chiral ligand and the nature of the external olefin. We anticipate that our findings will promote the development of asymmetric arene hydrogenations.

Enantio- and Diastereoselective, Complete Hydrogenation of Benzofurans by Cascade Catalysis

We report an enantio- and diastereoselective, complete hydrogenation of multiply substituted benzofurans in a one-pot cascade catalysis. The developed protocol facilitates the controlled installation of up to six new defined stereocenters and produces architecturally complex octahydrobenzofurans, prevalent in many bioactive molecules. A unique match of a chiral homogeneous ruthenium-N-heterocyclic carbene complex and an in situ activated rhodium catalyst from a complex precursor act in sequence to enable the presented process.

Rhodium nanoparticles inside well-defined unimolecular amphiphilic polymeric nanoreactors: synthesis and biphasic hydrogenation catalysis

Rhodium nanoparticles (Rh NPs) embedded in different amphiphilic core-crosslinked micelle (CCM) latexes (RhNP@CCM) have been synthesized by [RhCl(COD)(TPP@CCM)] reduction with H₂ (TPP@CCM = core-anchored triphenylphosphine). The reduction rate depends on temperature, on the presence of base (NEt₃) and on the P/Rh ratio. For CCMs with outer shells made of neutral P(MAA-co-PEOMA) copolymer chains (RhNP@CCM-N), the core-generated Rh NPs tend to migrate toward the hydrophilic shell and to agglomerate depending on the P/Rh ratio and core TPP density, whereas the MAA protonation state has a negligible effect. Conversely, CCMs with outer shells made of polycationic P(4VPMe⁺I^-) chains (RhNP@CCM-C) maintain core-confined and well dispersed Rh NPs. All RhNP@CCMs were used as catalytic nanoreactors under aqueous biphasic conditions for acetophenone, styrene and 1-octene hydrogenation. Styrene was efficiently hydrogenated by all systems with high selectivity for vinyl reduction. For acetophenone, competition between benzene ring and carbonyl reduction was observed as well as a limited access to the catalytic sites when using CCM-C. Neat 1-octene was also converted, but the activity increased when the substrate was diluted in 1-nonanol, which is a better core-swelling solvent. Whereas the molecular Rh^I center was more active than the Rh⁰ NPs in 1-octene hydrogenation, the opposite trend was observed for styrene hydrogenation. Although Rh NP migration and agglomeration occurred for RhNP@CCM-N, even at high P/Rh, the NPs remained core-confined for RhNP@CCM-C, but only when toluene rather than diethyl ether was used for product extraction before recycling.

Triphenylphosphine-Functionalized Core-Cross-Linked Micelles and Nanogels with a Polycationic Outer Shell: Synthesis and Application in Rhodium-Catalyzed Biphasic Hydrogenations

Unimolecular amphiphilic nanoreactors with a poly(4-vinyl-N-methylpyridinium iodide) (P4VPMe⁺ I^- ) polycationic outer shell and two different architectures (core-cross-linked micelles, CCM, and nanogels, NG), with narrow size distributions around 130-150 nm in diameter, were synthesized by RAFT polymerization from an R₀ -4VPMe⁺ I^- ₁₄₀ -b-S₅₀ -SC(S)SPr macroRAFT agent by either chain extension with a long (300 monomer units) hydrophobic polystyrene-based block followed by cross-linking with diethylene glycol dimethacrylate (DEGDMA) for the CCM particles, or by simultaneous chain extension and cross-linking for the NG particles. A core-anchored triphenylphosphine (TPP) ligand functionality was introduced by using 4-diphenylphosphinostyrene (DPPS) as a comonomer (5-20 % mol mol^-1 ) in the chain extension (for CCM) or chain extension/cross-linking (for NG) step. The products were directly obtained as stable colloidal dispersions in water (latexes). After loading with [RhCl(COD)]₂ to yield [RhCl(COD)(TPP@CCM)] or [RhCl(COD)(TPP@NG)], respectively, the polymers were used as polymeric nanoreactors in Rh-catalyzed aqueous biphasic hydrogenation of the model substrates styrene and 1-octene, either neat (for styrene) or in an organic solvent (toluene or 1-nonanol). All hydrogenations were rapid (TOF up to 300 h^-1 ) at 25 °C and 20 bar of H₂ pressure, the biphasic mixture rapidly decanted at the end of the reaction (<2 min), the Rh loss was negligible (<0.1 ppm in the recovered organic phase), and the catalyst phase could be recycled 10 times without significant loss of catalytic activity.

Twisting versus Delocalization in CAAC- and NHC-Stabilized Boron-Based Biradicals: The Roles of Sterics and Electronics

Twisted boron-based biradicals featuring unsaturated C2 R2 (R=Et, Me) bridges and stabilization by cyclic (alkyl)(amino)carbenes (CAACs) were recently prepared. These species show remarkable geometrical and electronic differences with respect to their unbridged counterparts. Herein, a thorough computational investigation on the origin of their distinct electrostructural properties is performed. It is shown that steric effects are mostly responsible for the preference for twisted over planar structures. The ground-state multiplicity of the twisted structure is modulated by the σ framework of the bridge, and different R groups lead to distinct multiplicities. In line with the experimental data, a planar structure driven by delocalization effects is observed as global minimum for R=H. The synthetic elusiveness of C2 R2 -bridged systems featuring N-heterocyclic carbenes (NHCs) was also investigated. These results could contribute to the engineering of novel main group biradicals.

Interrupted Pyridine Hydrogenation: Asymmetric Synthesis of δ-Lactams

Metal-catalyzed hydrogenation is an effective method to transform readily available arenes into saturated motifs, however, current hydrogenation strategies are limited to the formation of C-H and N-H bonds. The stepwise addition of hydrogen yields reactive unsaturated intermediates that are rapidly reduced. In contrast, the interruption of complete hydrogenation by further functionalization of unsaturated intermediates offers great potential for increasing chemical complexity in a single reaction step. Overcoming the tenet of full reduction in arene hydrogenation has been seldom demonstrated. In this work we report the synthesis of sought-after, enantioenriched δ-lactams from oxazolidinone-substituted pyridines and water by an interrupted hydrogenation mechanism.

Mild and Selective Rhodium-Catalyzed Transfer Hydrogenation of Functionalized Arenes

Diboron-mediated rhodium-catalyzed transfer hydrogenation of functionalized arenes is reported. In addition to good functional group tolerance, the reaction features operational simplicity and controllable chemoselectivity. The general applicability of this procedure is demonstrated by the selective hydrogenation of a range of arenes, including functionalized benzenes, biphenyls, and polyaromatics.

A simple and efficient metal free, additive, or base free dehydrogenation of tetrahydroisoquinolines using oxygen as a clean oxidant

Metal free dehydrogenation of various substituted tetrahydroisoquinolines via a simple and convenient metal free, atom economical route for the synthesis of corresponding isoquinolines under oxygen atmosphere in N-methyl-2-pyrollidone (NMP) is described. Metal free dehydrogenation was carried out without the use of additive or base. A scope of the methodology was demonstrated for a number of aryl and heteroaryl substitutions present at C1 position and ester moiety at C3 position and was found to be good substrates. Substituted isoquinolines (3a–3h) and their esters (3i–3m) were synthesized in very good to excellent yields.

Ultrathin Amorphous/Crystalline Heterophase Rh and Rh Alloy Nanosheets as Tandem Catalysts for Direct Indole Synthesis

Heterogeneous noble-metal-based catalysis plays an essential role in the production of fine chemicals. Rh-based catalysts are one of the most active candidates for indole synthesis. However, it is still highly desired to develop heterogeneous Rh-based catalysts with high activity and selectivity. In this work, a general, facile wet-chemical method is reported to synthesize ultrathin amorphous/crystalline heterophase Rh and Rh-based bimetallic alloy nanosheets (NSs), including RhCu, RhZn, and RhRu. Impressively, the amorphous/crystalline heterophase Rh NSs exhibit enhanced catalytic activity toward the direct synthesis of indole compared to the crystalline counterpart. Importantly, the obtained amorphous/crystalline heterophase RhCu alloy NSs can further enhance the selectivity to indole of >99.9% and the conversion is 100%. This work demonstrates the importance of phase engineering and metal alloying in the rational design and synthesis of tandem heterogeneous catalysts toward fine chemical synthesis.

Amphiphilic polymeric nanoreactors containing Rh(i)–NHC complexes for the aqueous biphasic hydrogenation of alkenes

A rhodium(i) complex bearing a monodentate N-heterocyclic carbene ligand has been confined into the core of amphiphilic core-crosslinked micelles (CCMs).

The solvent determines the product in the hydrogenation of aromatic ketones using unligated RhCl3 as catalyst precursor

RhCl3-catalysed hydrogenation/hydrodeoxygenation of aromatic ketones produced alkylcyclohexanes in TFE and cyclohexyl alkyl alcohols in water at moderate temperatures. Rh-nanoparticles were found to be the true catalysts.

Diastereoselective Rhodium-Catalyzed Hydrogenation of 2-Oxindoles and 3,4-Dihydroquinolones

The benzene ring of indolin-2-ones (2-oxindoles) and 3,4-dihydroquinol-2-ones was converted to a saturated cyclohexane ring by hydrogenation in the presence of the rhodium complex ^Cy(CAAC)Rh(cod)Cl. The stereoselectivity of the process was found to be high with respect to both external substituent R¹ within the saturated part of the heterocyclic ring and substituent X on the benzene ring. Twenty-one hexahydroindolin-2(3H)-ones (70-99% yield, dr = 83/17 to >99/1) and twelve octahydro-2(1H)-quinolinones (87-96% yield, dr = 64/36 to >99/1) were obtained with the major diastereoisomer exhibiting the hydrogen atoms in an all-cis arrangement. The high tolerance toward functional groups and the compatibility with existing stereogenic centers are key features of the hydrogenation protocol presented here.

Catalytic Transfer Hydrogenation of Arenes and Heteroarenes

Transfer hydrogenation reactions are of great interest to reduce diverse molecules under mild reaction conditions. To date, this type of reaction has only been successfully applied to alkenes, alkynes and polarized unsaturated compounds such as ketones, imines, pyridines, etc. The reduction of benzene derivatives by transfer hydrogenation has never been described, which is likely due to the high energy barrier required to dearomatize these compounds. In this context, we have developed a catalytic transfer hydrogenation reaction for the reduction of benzene derivatives and heteroarenes to form complex 3-dimensional scaffolds bearing various functional groups at room temperature without needing compressed hydrogen gas.

Accessing (Multi)Fluorinated Piperidines Using Heterogeneous Hydrogenation

Fluorinated piperidines are desirable motifs for pharmaceutical and agrochemical research. Nevertheless, general synthetic access remains out of reach. Herein, we describe a simple and robust cis-selective hydrogenation of abundant and cheap fluoropyridines to yield a broad scope of (multi)fluorinated piperidines. This protocol enables the chemoselective reduction of fluoropyridines while tolerating other (hetero)aromatic systems using a commercially available heterogenous catalyst. Fluorinated derivatives of important drug compounds are prepared, and a straightforward strategy for the synthesis of enantioenriched fluorinated piperidines is disclosed.

trans-Selective and Switchable Arene Hydrogenation of Phenol Derivatives

A trans-selective arene hydrogenation of abundant phenol derivatives catalyzed by a commercially available heterogeneous palladium catalyst is reported. The described method tolerates a variety of functional groups and provides access to a broad scope of trans-configurated cyclohexanols as potential building blocks for life sciences and beyond in a one-step procedure. The transformation is strategically important because arene hydrogenation preferentially delivers the opposite cis-isomers. The diastereoselectivity of the phenol hydrogenation can be switched to the cis-isomers by employing rhodium-based catalysts. Moreover, a protocol for the chemoselective hydrogenation of phenols to cyclohexanones was developed.

An Electron-Rich Cyclic (Alkyl)(Amino)Carbene on Au(111), Ag(111), and Cu(111) Surfaces

The structural properties and binding motif of a strongly σ-electron-donating N-heterocyclic carbene have been investigated on different transition-metal surfaces. The examined cyclic (alkyl)(amino)carbene (CAAC) was found to be mobile on surfaces, and molecular islands with short-range order could be found at high coverage. A combination of scanning tunneling microscopy (STM), X-ray photoelectron spectroscopy (XPS), and density functional theory (DFT) calculations highlights how CAACs bind to the surface, which is of tremendous importance to gain an understanding of heterogeneous catalysts bearing CAACs as ligands.