Preparation and Exceptional Mechanical Properties of Bone-Mimicking Size-Tuned Graphene Oxide@Carbon Nanotube Hybrid Paper

Mechanical Improvement of Graphene Oxide Film via the Synergy of Intercalating Highly Oxidized Graphene Oxide and Borate Bridging

Converting graphene oxide (GO) nanosheets into high-performance paper-like GO films has significant practical value. However, it is still challenging because the mechanical properties significantly decreased when the nanosheets are assembled into films. The simultaneous attainment of high tensile strength, high modulus, and relatively high toughness remains a formidable challenge. Here, we demonstrated an effective approach involving the incorporation of high oxidized graphene oxide (HOGO) and borate, to enhance the mechanical properties of GO films. X-ray photoelectron spectroscopy (XPS) measurements and thermogravimetric analysis-differential scanning calorimetry (TG-DSC) revealed the synergistic effects of hydrogen and covalent bonding from HOGO and borate, respectively. Additionally, wide-angle X-ray scattering (WAXS) analysis indicated a notable enhancement in the orientation of the GO in the resulting films, characterized by the Herman's orientation factor (ƒ = 0.927), attributable to the combined action of hydrogen and covalent bonding. The borate-crosslinked GO+HOGO films exhibited exceptional mechanical properties, with an impressive strength (417.2 MPa), high modulus (43.8 GPa), and relatively high toughness (2.5 MJ m-3). This innovative assembly strategy presents a promising avenue for achieving desirable mechanical properties, thereby enhancing the potential for commercial applications.

Graphdiyne biomaterials: from characterization to properties and applications

Graphdiyne (GDY), the sole synthetic carbon allotrope with sp-hybridized carbon atoms, has been extensively researched that benefit from its pore structure, fully conjugated surfaces, wide band gaps, and more reactive C≡C bonds. In addition to the intrinsic features of GDY, engineering at the nanoscale, including metal/transition metal ion modification, chemical elemental doping, and other biomolecular modifications, endowed GDY with a broader functionality. This has led to its involvement in biomedical applications, including enzyme catalysis, molecular assays, targeted drug delivery, antitumor, and sensors. These promising research developments have been made possible by the rational design and critical characterization of GDY biomaterials. In contrast to other research areas, GDY biomaterials research has led to the development of characterization techniques and methods with specific patterns and some innovations based on the integration of materials science and biology, which are crucial for the biomedical applications of GDY. The objective of this review is to provide a comprehensive overview of the biomedical applications of GDY and the characterization techniques and methods that are essential in this process. Additionally, a general strategy for the biomedical research of GDY will be proposed, which will be of limited help to researchers in the field of GDY or nanomedicine.

Flexible and Recyclable Bio-Based Polyester Composite Films with Outstanding Mechanical and Gas Barrier Properties Using Leaf-Shaped CNT@BNNS Covalent Heterojunction

With the depletion of petroleum resources, the development of sustainable alternatives for plastic substitutes has grown in importance. It is urgently desirable yet challenging to design high-performance polyesters with extensive mechanical and prominent gas barrier properties. This work uses bio-based PBF polyester as a matrix, "leaf-shaped" carbon nanotube@boron nitride nano-sheet (CNT@BNNS) covalent hetero-junctions as functional fillers, to fabricate CNT@BNNS/PBF (denoted as CBNP) composite films through an "in-situ polymerizing and hot-pressing" strategy. The covalent CNT "stem" suppresses the re-stacking of BNNS "leaf", endowing hetero-structured CNT@BNNS illustrates superior stress transfer and physical barrier effect. The covalently hetero structure and high orientation degree of CNT@BNNS greatly improve the comprehensive performance of the CBNP composites, including excellent mechanical (strength of 76 MPa, modulus of 2.3 GPa, toughness of 85 MJ m-3, elongation at break of 193%) and gas barrier (O2 of 0.015 barrer, and H2O of 1.1 × 10-14 g cm cm-2 s-1 Pa-1) properties that are much higher than for pure PBF or other-type polyesters, and most engineering plastics. Moreover, the CBNP composites also boast easy recyclability, overcoming the tradeoff between high performance and easy recycling of traditional plastics, which makes the polyester composite competitive as a plastic substitute.

Emerging advances of composite membranes for seawater pre-treatment: a review

As the population continues to grow, the preservation of the world's water resources is becoming a serious challenge. The seawater desalination process is considered a sustainable option for the future. The two most common technologies used in desalination are reverse osmosis (RO) and membrane distillation (MD). However, membrane fouling caused by the accumulation of contaminants on the membrane surface is an emerging and growing problem. A pre-treatment stage is required to reach optimal efficiency during the desalination process since this stage is crucial for a successful desalination process. In this regard, the development of new material-based composite membranes has the potential to upgrade the anti-fouling features of RO membranes thereby enhancing desalination efficiency due to their high permeability, hydrophilicity, selectivity mechanical strength, thermal stability, and anti-bacterial properties. The objective of this review is to present various techniques for seawater pre-treatment. The results of the use of several membrane types and methods of modification have also been discussed. The performance of composite membranes for seawater pre-treatment is defined and the future perspectives have been highlighted.

Novel multifunctional dexamethasone carbon dots synthesized using the one-pot green method for anti-inflammatory, osteogenesis, and osteoimmunomodulatory in bone regeneration

Bone tissue regeneration is still a major orthopedic challenge. The process of bone regeneration is often disrupted by inflammation. Elevated levels of reactive oxygen species (ROS) can lead to aggravated inflammation and even hinder tissue repairs. Therefore, inhibiting the inflammatory response during the process of bone regeneration and promoting bone tissue regeneration under inflammatory conditions are the goals that need to be achieved urgently. In this work, dexamethasone carbon dots (DCDs) were developed by a one-pot facile hydrothermal method using citric acid, ammonium fluoride, and a trace amount of dexamethasone. The obtained DCDs exhibited good biocompatibility and could promote the differentiation of rBMSCs under both normal and inflammatory conditions. Owing to the abundant-reducing groups, DCDs could also scavenge ROS (˙OH) and retain the pharmacological activity of dexamethasone, thereby reducing the inflammatory response. Moreover, DCDs presented a good osteoimmunomodulatory activity to induce a bone immune microenvironment and further promote the differentiation of BMSCs. DCDs could promote macrophage phenotype switching (from M1-type macrophages to M2-type macrophages) under inflammatory conditions, which was beneficial to the anti-inflammatory response. All in all, DCDs could reduce the inflammatory response of bone tissue and accelerate bone regeneration in combination with the regulation of the bone immune. Undoubtedly, it also provided a new idea for developing a novel carbon nanomaterial for repairing bone tissue defects.

Microfluidic Paper-Based Analytical Devices for the Determination of Food Contaminants: Developments and Applications

Food safety is an issue that cannot be ignored at any time because of the great impact of food contaminants on people's daily life, social production, and the economy. Because of the extensive demand for high-quality food, it is necessary to develop rapid, reliable, and efficient devices for food contaminant detection. Microfluidic paper-based analytical devices (μPADs) have been applied in a variety of detection fields owing to the advantages of low-cost, ease of handling, and portability. This review systematically discusses the latest progress of μPADs, including the fundamentals of fabrication as well as applications in the detection of chemical and biological hazards in foods, hoping to provide suitable screening strategies for contaminants in foods and accelerating the technology transformation of μPADs from the lab into the field.

The synthesis and properties of isocyanate-based polyimide foam composites containing MWCNTs of various contents and diameters

Polyimide foams (PIFs) were synthesized using in situ polymerization from poly((phenyl isocyanate)-co-formaldehyde) (PAPI), pyromellitic dianhydride (PMDA), and multi-walled carbon nanotubes (MWCNTs) (0.05, 0.1, 0.2, 0.4, and 0.6 wt%) functionalized with –OH; the diameters were 10–20 nm, 20–30 nm, and >50 nm. The morphology, mechanical properties, and flame retardancy of the composites made from MWCNTs with different contents and diameters were studied. The effects of different contents of MWCNT on the properties of composites were compared. SEM results show that the pore morphology of PIF was not damaged when the content of the MWCNTs was low due to crosslinking between MWCNTs and amide bonds. When the content of the MWCNTs was high, the vacuoles of PIF became large and uneven. Compared to pure PIF, mwCNT-1 (0.2% MWCNT content) significantly increased the compressive strength (330%) and compression modulus (210%) of PI. Due to the significant thermal stability of PIF/MWCNTs, the degradation temperature of PIF/MWCNT-1 (0.2% MWCNT content) was increased from 302 °C to 321.5 °C upon addition of MWCNTs. The effects of different diameters of MWCNTs on the morphology and properties of the PIF/MWCNT composites were also compared. The morphology, thermal stability, and mechanical properties of the composites containing smaller MWCNTs were higher than those of composites containing larger MWCNTs. This is because MWCNTs act as nucleating agents to promote the formation and growth of bubbles. Smaller diameters of MWCNTs lead to higher MWCNT contents in the unit volume and more nucleation points of MWCNTs in the PIF. An increasing MWCNT diameter leads to a gradually decreasing number of bubbling nucleation centers. The LOI of PIF/MWCNTS increased with increasing MWCNT due to the nitrogen heterocyclic interaction between the PIF and MWCNTS. The diameter of MWCNTS had only a minor effect on the flame retardancy.

PIFs were synthesized using in situ polymerization from PAPI, PMDA, and MWCNTs (0.05, 0.1, 0.2, 0.4, and 0.6 wt%) functionalized with –OH; the diameters were 10–20 nm, 20–30 nm, and >50 nm.

Free-Standing Graphene Oxide and Carbon Nanotube Hybrid Papers with Enhanced Electrical and Mechanical Performance and Their Synergy in Polymer Laminates

Hybrid nanomaterials fabricated by the heterogeneous integration of 1D (carbon nanotubes) and 2D (graphene oxide) nanomaterials showed synergy in electrical and mechanical properties. Here, we reported the infiltration of carboxylic functionalized single-walled carbon nanotubes (C-SWNT) into free-standing graphene oxide (GO) paper for better electrical and mechanical properties than native GO. The stacking arrangement of GO sheets and its alteration in the presence of C-SWNT were comprehensively explored through scanning electron microscopy, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction. The C-SWNTs bridges between different GO sheets produce a pathway for the flow of electrical charges and provide a tougher hybrid system. The nanoscopic surface potential map reveals a higher work function of the individual functionalised SWNTs than surrounded GO sheets showing efficient charge exchange. We observed the enhanced conductivity up to 50 times and capacitance up to 3.5 times of the hybrid structure than the GO-paper. The laminate of polystyrene composites provided higher elastic modulus and mechanical strength when hybrid paper is used, thus paving the way for the exploitation of hybrid filler formulation in designing polymer composites.

Nanomaterials-based Cell Osteogenic Differentiation and Bone Regeneration

With the rapid development of nanotechnology, various nanomaterials have been applied to bone repair and regeneration. Due to the unique chemical, physical and mechanical properties, nanomaterials could promote stem cells osteogenic differentiation, which has great potentials in bone tissue engineering and exploiting nanomaterials-based bone regeneration strategies. In this review, we summarized current nanomaterials with osteo-induction ability, which could be potentially applied to bone tissue engineering. Meanwhile, the unique properties of these nanomaterials and their effects on stem cell osteogenic differentiation are also discussed. Furthermore, possible signaling pathways involved in the nanomaterials- induced cell osteogenic differentiation are also highlighted in this review.

A wet-filtration-zipping approach for fabricating highly electroconductive and auxetic graphene/carbon nanotube hybrid buckypaper

A combination of carbon nanotubes (CNT) and graphene in the form of macroscopic hybrid buckypaper (HBP), exhibits a unique set of properties that can be exploited for many emerging applications. Here, we present a simple, inexpensive and scalable approach for the synthesis of highly conductive auxetic graphene/CNT HBP via wet-filtration-zipping and demonstrate the electrical, electrochemical and mechanical performance (tensile, mode I and mode III fracture) of synthesized HBP. An overall increase in electrical conductivity of 247% is observed for HBP (50 wt.% graphene and 50 wt.% CNT) as compared to BP (100 wt.% CNT) due to effective electronic percolation through the graphene and CNT. As a negative electrode for lithium-ion batteries, HBP shows 50% higher gravimetric specific capacity and 89% lower charge transfer resistance relative to BP. The graphene content in the HBP influences the mechanical performance providing an auxetic structure to HBP with large negative Poisson's ratio. The facile green-chemistry approach reported here can be readily applied to any other 1D and 2D materials and solves key challenges associated with existing buckypaper manufacturing methods. The potential of the synthesis method to integrate with current cellulose paper manufacturing technology and its scalability demonstrate the novelty of the work for industrial scale production.

Biomaterial Cues Regulate Epigenetic State and Cell Functions-A Systematic Review

Biomaterial cues can act as potent regulators of cell niche and microenvironment. Epigenetic regulation plays an important role in cell functions, including proliferation, differentiation, and reprogramming. It is now well appreciated that biomaterials can alter epigenetic states of cells. In this study, we systematically reviewed the underlying epigenetic mechanisms of how different biomaterial cues, including material chemistry, topography, elasticity, and mechanical stimulus, influence cell functions, such as nuclear deformation, cell proliferation, differentiation, and reprogramming, to summarize the differences and similarities among each biomaterial cues and their mechanisms, and to find common and unique properties of different biomaterial cues. Moreover, this work aims to establish a mechanogenomic map facilitating highly functionalized biomaterial design, and renders new thoughts of epigenetic regulation in controlling cell fates in disease treatment and regenerative medicine.

Flexible Poly(vinyl chloride) Nanocomposites Reinforced with Hyperbranched Polyglycerol-Functionalized Graphene Oxide for Enhanced Gas Barrier Performance

Herein, we describe the preparation of flexible poly(vinyl chloride) (PVC) containing hyperbranched polyglycerol (HPG)-functionalized graphene oxide (HGO) as a reinforcing filler and reveal that the obtained composites exhibit greatly improved gas barrier properties. Moreover, we show that HGO, synthesized by surface-initiated ring-opening polymerization of glycidol followed by esterification with butyric anhydride, exists as individual exfoliated nanosheets possessing abundant functional groups capable of interacting with PVC. A comparative study of butyl-terminated graphene oxide (BGO) reveals that functionalization with HPG is of key importance for achieving a uniform dispersion of HGO in the PVC matrix and results in strong interfacial interactions between HGO and PVC. As a result, flexible PVC/HGO nanocomposite films exhibit significantly enhanced tensile strength and toughness compared to those of neat plasticized PVC while maintaining its inherent stretchability. Furthermore, the two-dimensional planar structure and homogeneous distribution of HGO in PVC/HGO nanocomposites make gas molecules follow a highly tortuous path, resulting in remarkably reduced oxygen permeability, which is more than 60% lower than that of neat plasticized PVC. Consequently, HGO is demonstrated to be promising component of flexible and gas-impermeable PVC films for a wide range of applications.

Metal-Phenolic Carbon Nanocomposites for Robust and Flexible Energy-Storage Devices

Future electronics applications such as wearable electronics depend on the successful construction of energy-storage devices with superior flexibility and high electrochemical performance. However, these prerequisites are challenging to combine: External forces often cause performance degradation, whereas the trade-off between the required nanostructures for strength and electrochemical performance only results in diminished energy storage. Herein, a flexible supercapacitor based on tannic acid (TA) and carbon nanotubes (CNTs) with a unique nanostructure is presented. TA was self-assembled on the surface of the CNTs by metal-phenolic coordination bonds, which provides the hybrid film with both high strength and high pseudocapacitance. Besides 17-fold increased mechanical strength of the final composite, the hybrid film simultaneously exhibits excellent flexibility and volumetric capacitance.

Alignment of Carbon Nanotubes in Carbon Nanotube Fibers Through Nanoparticles: A Route for Controlling Mechanical and Electrical Properties

This is the first study that describes how semiconducting ZnO can act as an alignment agent in carbon nanotubes (CNTs) fibers. Because of the alignment of CNTs through the ZnO nanoparticles linking groups, the CNTs inside the fibers were equally distributed by the attraction of bonding forces into sheetlike bunches, such that any applied mechanical breaking load was equally distributed to each CNT inside the fiber, making them mechanically robust against breaking loads. Although semiconductive ZnO nanoparticles were used here, the electrical conductivity of the aligned CNT fiber was comparable to bare CNT fibers, suggesting that the total electron movement through the CNTs inside the aligned CNT fiber is not disrupted by the insulating behavior of ZnO nanoparticles. A high degree of control over the electrical conductivity was also demonstrated by the ZnO nanoparticles, working as electron movement bridges between CNTs in the longitudinal and crosswise directions. Well-organized surface interface chemistry was also observed, which supports the notion of CNT alignment inside the fibers. This research represents a new area of surface interface chemistry for interfacially linked CNTs and ZnO nanomaterials with improved mechanical properties and electrical conductivity within aligned CNT fibers.

Functional Graphene Nanomaterials Based Architectures: Biointeractions, Fabrications, and Emerging Biological Applications

Functional graphene nanomaterials (FGNs) are fast emerging materials with extremely unique physical and chemical properties and physiological ability to interfere and/or interact with bioorganisms; as a result, FGNs present manifold possibilities for diverse biological applications. Beyond their use in drug/gene delivery, phototherapy, and bioimaging, recent studies have revealed that FGNs can significantly promote interfacial biointeractions, in particular, with proteins, mammalian cells/stem cells, and microbials. FGNs can adsorb and concentrate nutrition factors including proteins from physiological media. This accelerates the formation of extracellular matrix, which eventually promotes cell colonization by providing a more beneficial microenvironment for cell adhesion and growth. Furthermore, FGNs can also interact with cocultured cells by physical or chemical stimulation, which significantly mediate their cellular signaling and biological performance. In this review, we elucidate FGNs-bioorganism interactions and summarize recent advancements on designing FGN-based two-dimensional and three-dimensional architectures as multifunctional biological platforms. We have also discussed the representative biological applications regarding these FGN-based bioactive architectures. Furthermore, the future perspectives and emerging challenges will also be highlighted. Due to the lack of comprehensive reviews in this emerging field, this review may catch great interest and inspire many new opportunities across a broad range of disciplines.

Multidimensional structure and enhancement performance of modified graphene/carbon nanotube assemblies in tribological properties of polyimide nanocomposites

Modified graphene/carbon nanotube assemblies with diverse structures were prepared by chemical compounding and their structure-related tribological performance was investigated.

A bio-conjugated chitosan wrapped CNT based 3D nanoporous architecture for separation and inactivation of Rotavirus and Shigella waterborne pathogens

The multifunctional bio-conjugated 3D architecture reported here represents huge advances in the fields of environmental remediation and sustainable remediation.

Computational studies on the interactions of glycine amino acid with graphene, h-BN and h-SiC monolayers

In the present work, the adsorption of glycine amino acid and its zwitterionic form onto three different hexagonal sheets, namely graphene, boron-nitride (h-BN) and silicon carbide (h-SiC), has been investigated within the framework of density functional theory (DFT) calculations.