Nano Day: Celebrating the Next Decade of Nanoscience and Nanotechnology

Synthesis of Multifunctional Mn3O4-Ag2S Janus Nanoparticles for Enhanced T1-Magnetic Resonance Imaging and Photo-Induced Tumor Therapy

The global burden of cancer is increasing rapidly, and nanomedicine offers promising prospects for enhancing the life expectancy of cancer patients. Janus nanoparticles (JNPs) have garnered considerable attention due to their asymmetric geometry, enabling multifunctionality in drug delivery and theranostics. However, achieving precise control over the self-assembly of JNPs in solution at the nanoscale level poses significant challenges. Herein, a low-temperature reversed-phase microemulsion system was used to obtain homogenous Mn3O4-Ag2S JNPs, which showed significant potential in cancer theranostics. Structural characterization revealed that the Ag2S (5-10 nm) part was uniformly deposited on a specific surface of Mn3O4 to form a Mn3O4-Ag2S Janus morphology. Compared to the single-component Mn3O4 and Ag2S particles, the fabricated Mn3O4-Ag2S JNPs exhibited satisfactory biocompatibility and therapeutic performance. Novel diagnostic and therapeutic nanoplatforms can be guided using the magnetic component in JNPs, which is revealed as an excellent T1 contrast enhancement agent in magnetic resonance imaging (MRI) with multiple functions, such as photo-induced regulation of the tumor microenvironment via producing reactive oxygen species and second near-infrared region (NIR-II) photothermal excitation for in vitro tumor-killing effects. The prime antibacterial and promising theranostics results demonstrate the extensive potential of the designed photo-responsive Mn3O4-Ag2S JNPs for biomedical applications.

Controlling the Thermal Conductivity of Monolayer Graphene with Kirigami Structure

In this work, the thermal conductivity performance of graphene kirigami (GK) was systematically investigated via molecular dynamics (MD) simulations. The results indicate that the degree of defects (DD) on GK has a significant influence on thermal conductivity. Reducing the DD is the most effective way to decrease the thermal conductivity of GK. For zigzag-incised GK sheets, the change rate of thermal conductivity can reach up to 1.86 W/mK per 1% change in DD by tuning the incision length. The rate of changing thermal conductivity with DD can be slowed down by changing the width among incisions. Compared with the zigzag-incised GK sheets, heat transfer across the armchair-incised GK comes out more evenly, without significant steep and gentle stages along the heat transfer routes. More importantly, the GK structure can adjust the thermal conductivity by stretching, which the previously reported nanoporous graphene does not have. The change rate of thermal conductivity achieves about 0.17 W/mK with 1% stretching strain for simulated GK and can be further reduced at high tensile strain rates, benefiting the precise and variable control of the thermal conductivity of the monolayer graphene.

Organic–inorganic hybrid nanomaterials prepared via polymerization-induced self-assembly: recent developments and future opportunities

This review highlights recent developments in the preparation of organic–inorganic hybrid nanomaterials via polymerization-induced self-assembly.

Nanotechnology for a Sustainable Future: Addressing Global Challenges with the International Network4Sustainable Nanotechnology

Nanotechnology has important roles to play in international efforts in sustainability. We discuss how current and future capabilities in nanotechnology align with and support the United Nations' Sustainable Development Goals. We argue that, as a field, we can accelerate the progress toward these goals both directly through technological solutions and through our special interdisciplinary skills in communication and tackling difficult challenges. We discuss the roles of targeting solutions, technology translation, the circular economy, and a number of examples from national efforts around the world in reaching these goals. We have formed a network of leading nanocenters to address these challenges globally and seek to recruit others to join us.

The International Society of RNA Nanotechnology and Nanomedicine (ISRNN): The Present and Future of the Burgeoning Field

The International Society of RNA Nanotechnology and Nanomedicine (ISRNN) hosts an annual meeting series focused on presenting the latest research achievements involving RNA-based therapeutics and strategies, aiming to expand their current biomedical applications while overcoming the remaining challenges of the burgeoning field of RNA nanotechnology. The most recent online meeting hosted a series of engaging talks and discussions from an international cohort of leading nanotechnologists that focused on RNA modifications and modulation, dynamic RNA structures, overcoming delivery limitations using a variety of innovative platforms and approaches, and addressing the newly explored potential for immunomodulation with programmable nucleic acid nanoparticles. In this Nano Focus, we summarize the main discussion points, conclusions, and future directions identified during this two-day webinar as well as more recent advances to highlight and to accelerate this exciting field.

Polymer Chemistry for Haptics, Soft Robotics, and Human-Machine Interfaces

Progress in the field of soft devices-i.e., haptics, robotics, and human-machine interfaces (HRHMIs)-has its basis in the science of polymeric materials and chemical synthesis. However, in examining the relevant literature, we find that most developments have been enabled by off-the-shelf materials used either alone or as components of physical blends and composites. In this Progress Report, we take the position that a greater awareness of the capabilities of synthetic chemistry will accelerate the capabilities of HRHMIs. Conversely, an awareness of the applications sought by engineers working in this area may spark the development of new molecular designs and synthetic methodologies by chemists. We highlight several applications of active, stimuli-responsive polymers, which have demonstrated or shown potential use in HRHMIs. These materials share the fact that they are products of state-of-the-art synthetic techniques. The Progress Report is thus organized by the chemistry by which the materials were synthesized, including controlled radical polymerization, metal-mediated cross-coupling polymerization, ring-opening polymerization, various strategies for crosslinking, and hybrid approaches. These methods can afford polymers with multiple properties (i.e. conductivity, stimuli-responsiveness, self-healing and degradable abilities, biocompatibility, adhesiveness, and mechanical robustness) that are of great interest to scientists and engineers concerned with soft devices for human interaction.

Reactive oxygen species production, genotoxicity and telomere length in FE1-Muta™Mouse lung epithelial cells exposed to carbon nanotubes

Carbon nanotubes (CNTs) are fiber-like nanomaterials, which are used in various applications with possible exposure to humans. The genotoxicity and carcinogenic potential of CNTs remain to be fully understood. This study assessed the genotoxicity of three different multi-walled carbon nanotubes (MWCNTs) (MWCNT-7, NM-401 and NM-403) and one single-walled carbon nanotube (SWCNT) (NM-411) in FE1-Muta™Mouse lung epithelial (MML) cells using the alkaline comet assay. With the 2',7'-dichlorodihydrofluorescein diacetate fluorescent probe, we assessed the effect of CNT-exposure on the intracellular production of reactive oxygen species (ROS). We measured the effect of a 10-week CNT exposure on telomere length using quantitative PCR. Two of the included MWCNTs (NM-401 and MWCNT-7) and the SWCNT (NM-411) caused a significant increase in the level of DNA damage at concentrations up to 40 µg/ml (all concentrations pooled, p < 0.05), but no concentration-response relationships were found. All of the CNTs caused an increase in intracellular ROS production compared to unexposed cells (p_trend < 0.05). Results from the long-term exposure showed longer telomere length in cells exposed to MWCNTs compared to unexposed cells (p < 0.01). In conclusion, our results indicated that the included CNTs cause ROS production and DNA strand breaks in FE1-MML cells. Moreover, the MWCNTs, but not the SWCNT, had an impact on telomere length in a long-term exposure scenario.

Organosilanes and their magnetic nanoparticles as naked eye red emissive sensors for Ag+ ions and potent anti-oxidants

This work involves the synthesis of organosilanes as colorimetric sensors for the detection of Ag⁺ ions, cytotoxicity studies and antioxidant activity.

Macrophage-Membrane-Camouflaged Disintegrable and Excretable Nanoconstruct for Deep Tumor Penetration

The consolidation of nanovectors with biological membranes has recently been a subject of interest owing to the prolonged systemic circulation time and delayed clearance by the reticuloendothelial system of such systems. Among the different biomembranes, the macrophage membrane has a similar systemic circulation time, with an additional chemotactic aptitude, targeting integrin proteins. In this study, we aimed to establish a laser-activated, disintegrable, and deeply tumor-penetrative nanoplatform. We used a highly tumor-ablative and laser-responsive disintegrable copper sulfide nanoparticle, loaded it with paclitaxel, and camouflaged it with the macrophage membrane for the fabrication of PTX@CuS@MMNPs. The in vitro paclitaxel release profile was favorable for release in the tumor microenvironment, and the release was accelerated after laser exposure. Cellular internalization was improved by membrane encapsulation. Cellular uptake, cytotoxicity, reactive oxygen species generation, and apoptosis induction of PTX@CuS@MMNPs were further improved upon laser exposure, and boosted permeation was achieved by co-administration of the tumor-penetrating peptide iRGD. In vivo tumor accumulation, tumor inhibition rate, and apoptotic marker expression induced by PTX@CuS@MMNPs were significantly improved by laser irradiation and iRGD co-administration. PTX@CuS@MMNPs induced downregulation of cellular proliferation and angiogenic markers but no significant changes in body weight, survival, or significant toxicities in vital organs after laser exposure, suggesting their biocompatibility. The disintegrability of the nanosystem, accredited to biodegradability, favored efficient elimination from the body. In conclusion, PTX@CuS@MMNPs showed promising traits in combination therapies for excellent tumor eradication.

From Protein Corona to Colloidal Self-Assembly: The Importance of Protein Size in Protein-Nanoparticle Interactions

Protein adsorption on nanoparticles is an important field of study, particularly with regard to nanomedicine and nanotoxicology. Many factors can influence the composition and structure of the layer(s) of adsorbed proteins, the so-called protein corona. However, the role of protein size has not been specifically investigated, although some evidence has indicated its potential important role in corona composition and structure. To assess the role of protein size, we studied the interactions of hemoproteins (spanning a large size range) with monodisperse silica nanoparticles. We combined various techniques-adsorption isotherms, isothermal titration calorimetry, circular dichroism, and transmission electron cryomicroscopy-to address this issue. Overall, the results show that small proteins behaved as typical model proteins, forming homogeneous monolayers on the nanoparticle surface (protein corona). Their adsorption is purely enthalpy-driven, with subtle structural changes. In contrast, large proteins interact with nanoparticles via entropy-driven mechanisms. Their structure is completely preserved during adsorption, and any given protein can directly bind to several nanoparticles, forming bridges in these newly formed protein-nanoparticle assemblies. Protein size is clearly an overlooked factor that should be integrated into proteomics and toxicological studies.

A proof-of-concept of lateral flow based luteinizing hormone detection in urine for ovulation prediction in buffaloes

We present a method for the detection of luteinizing hormone (LH) in buffalo urine by using gold nanoparticles (AuNPs) conjugated with novel anti-peptide antibodies against LH (anti LHP) in lateral flow assay format. Buffalo LH is an important reproductive hormone and is a chemically complex glycoprotein. Its surge release precedes ovulation and therefore detecting LH has implications in identifying the ovulation event. Any sensor thus developed for sensing LH may have the potential for predicting ovulation and hence can assist herd managers in making decisions on the timing of artificial insemination. Recombinant LH production is time consuming, difficult and costly. Hence, we identified an epitope peptide sequence in buffalo LH and raised antibodies against it. The chemically synthesized peptide and antibodies were used for developing the sensor. The gold nanoparticles and conjugates were characterized through physicochemical methods which confirmed the binding of peptides and antibodies to the gold nanoparticles. A qualitative ELISA for sensing LH was developed based on competitive binding of gold nanoparticles conjugated with the epitope peptide and LH towards the anti-peptide antibodies against LH. We also further explored the detection of LH in buffalo urine using the gold nanoparticle-LHP conjugate (AuNP-LHP) in dipstick format. These experiments provided a proof-of-concept towards applicability of the LH based sensor for ovulation prediction in buffaloes.

Proteomic Analysis Identifies Markers of Exposure to Cadmium Sulphide Quantum Dots (CdS QDs)

The use of cadmium sulphide quantum dot (CdS QD)-enabled products has become increasingly widespread. The prospect of their release in the environment is raising concerns. Here we have used the yeast model Saccharomyces cerevisiae to determine the potential impact of CdS QD nanoparticles on living organisms. Proteomic analyses and cell viability assays performed after 9 h exposure revealed expression of proteins involved in oxidative stress and reduced lethality, respectively, whereas oxidative stress declined, and lethality increased after 24 h incubation in the presence of CdS QDs. Quantitative proteomics using the iTRAQ approach (isobaric tags for relative and absolute quantitation) revealed that key proteins involved in essential biological pathways were differentially regulated over the time course of the experiment. At 9 h, most of the glycolytic functions increased, and the abundance of the number of heat shock proteins increased. This contrasts with the situation at 24 h where glycolytic functions, some heat shock proteins as well as oxidative phosphorylation and ATP synthesis were down-regulated. It can be concluded from our data that cell exposure to CdS QDs provokes a metabolic shift from respiration to fermentation, comparable to the situation reported in some cancer cell lines.

Assessing the cyto-genotoxic potential of model zinc oxide nanoparticles in the presence of humic-acid-like-polycondensate (HALP) and the leonardite HA (LHA)

The present study investigates the potential cyto-genotoxic effects of model zinc oxide nanoparticles (ZnO NPs) on human lymphocytes, with and/or without humic acids (HAs). Two types of HAs were studied, a natural well-characterized leonardite HA (LHA) and its synthetic-model, a humic-acid-like-polycondensate (HALP). The Cytokinesis Block Micronucleus (CBMN) assay was applied in cell cultures treated with different concentrations of ZnO NPs (0.5, 5, 10, 20 μg mL^-1) and under different concentrations of either HALP or LHA (ZnO NPs-HALP and ZnO NPs-LHA, at concentrations of 0.5-0.8, 5-8, 10-16, 20-32 and 0.5-2, 5-20, 10-40, 20-80 μg mL^-1, respectively). According to the results, ZnO NPs lacked genotoxicity but demonstrated cytotoxic potential. Binary mixtures of ZnO NPs-HAs (ZnO NPs-HALP or ZnO NPs-LHA) showed negligible alterations of micronuclei (MN) formation in challenged cells, with cytotoxic effects revealed only in case of cells treated with ZnO NPs-LHA at the concentration 5-20 μg mL^-1. Furthermore, no genotoxic phenomena were exerted neither by the ZnO NPs nor from their mixtures with HAs. These findings indicate [i] the cytotoxic activity of used ZnO NPs on human lymphocytes, and [ii] reveal the protective role of HAs against ZnO NPs mediated cytotoxicity.

SPION decorated exosome delivery of TNF-α to cancer cell membranes through magnetism

Tumor necrosis factor (TNF-α) is capable of inducing apoptosis and is a promising candidate for genetic engineering drugs in cancer therapy; however, the serious side-effects of TNF-α hinder their clinical application. In the present study, a method for preparing fusion proteins of cell-penetrating peptides (CPP) and TNF-α (CTNF-α)-anchored exosomes coupled with superparamagnetic iron oxide nanoparticles (CTNF-α-exosome-SPIONs) with membrane targeting anticancer activity has been demonstrated. To acquire exosomes with TNF-α anchored in its membrane, a CTNF-α expression vector was constructed and a stable mesenchymal stem cell cell line that expressed CTNF-α was established. Conjugating transferrin-modified SPIONs (Tf-SPIONs) onto CTNF-α-exosomes through transferrin-transferrin receptor (Tf-TfR) interaction yields CTNF-α-exosome-SPIONs with good water dispersibility. The incorporation of TNF-α into exosomes and the conjugation of SPIONs significantly enhanced the binding capacity of TNF-α to its membrane-bound receptor TNFR I, thus increasing the therapeutic effects. CTNF-α-exosome-SPIONs significantly enhanced tumor cell growth inhibition via induction of the TNFR I-mediated apoptotic pathway. In vivo studies using murine melanoma subcutaneous cancer models showed that TNF-α-loaded exosome-based vehicle delivery enhanced cancer targeting under an external magnetic field and suppressed tumor growth with mitigating toxicity. Taken together, our results suggest that CTNF-α-exosome-SPIONs showed great potential in membrane targeting therapy.

Body-Integrated Self-Powered System for Wearable and Implantable Applications

The human body has an abundance of available energy from the mechanical movements of walking, jumping, and running. Many devices such as electromagnetic, piezoelectric, and triboelectric energy harvesting devices have been demonstrated to convert body mechanical energy into electricity, which can be used to power various wearable and implantable electronics. However, the complicated structure, high cost of production/maintenance, and limitation of wearing and implantation sites restrict the development and commercialization of the body energy harvesters. Here, we present a body-integrated self-powered system (BISS) that is a succinct, highly efficient, and cost-effective method to scavenge energy from human motions. The biomechanical energy of the moving human body can be harvested through a piece of electrode attached to skin. The basic principle of the BISS is inspired by the comprehensive effect of triboelectrification between soles and floor and electrification of the human body. We have proven the feasibility of powering electronics using the BISS in vitro and in vivo. Our investigation of the BISS exhibits an extraordinarily simple, economical, and applicable strategy to harvest energy from human body movements, which has great potential for practical applications of self-powered wearable and implantable electronics in the future.

Nanogenerators as a Sustainable Power Source: State of Art, Applications, and Challenges

A sustainable power source to meet the needs of energy requirement is very much essential in modern society as the conventional sources are depleting. Bioenergy, hydropower, solar, and wind are some of the well-established renewable energy sources that help to attain the need for energy at mega to gigawatts power scale. Nanogenerators based on nano energy are the growing technology that facilitate self-powered systems, sensors, and flexible and portable electronics in the booming era of IoT (Internet of Things). The nanogenerators can harvest small-scale energy from the ambient nature and surroundings for efficient utilization. The nanogenerators were based on piezo, tribo, and pyroelectric effect, and the first of its kind was developed in the year 2006 by Wang et al. The invention of nanogenerators is a breakthrough in the field of ambient energy-harvesting techniques as they are lightweight, easily fabricated, sustainable, and care-free systems. In this paper, a comprehensive review on fundamentals, performance, recent developments, and application of nanogenerators in self-powered sensors, wind energy harvesting, blue energy harvesting, and its integration with solar photovoltaics are discussed. Finally, the outlook and challenges in the growth of this technology are also outlined.

Polypyrrole⁻Nickel Hydroxide Hybrid Nanowires as Future Materials for Energy Storage

Hybrid materials play an essential role in the development of the energy storage technologies since a multi-constituent system merges the properties of the individual components. Apart from new features and enhanced performance, such an approach quite often allows the drawbacks of single components to be diminished or reduced entirely. The goal of this paper was to prepare and characterize polymer-metal hydroxide (polypyrrole-nickel hydroxide, PPy-Ni(OH)₂) nanowire arrays demonstrating good electrochemical performance. Nanowires were fabricated by potential pulse electrodeposition of pyrrole and nickel hydroxide into nanoporous anodic alumina oxide (AAO) template. The structural features of as-obtained PPy-Ni(OH)₂ hybrid nanowires were characterized using FE-SEM and TEM analysis. Their chemical composition was confirmed by energy-dispersive x-ray spectroscopy (EDS). The presence of nickel hydroxide in the synthesized PPy-Ni(OH)₂ nanowire array was investigated by X-ray photoelectron spectroscopy (XPS). Both FE-SEM and TEM analyses confirmed that the obtained nanowires were composed of a polymer matrix with nanoparticles dispersed within. EDS and XPS techniques confirmed the presence of PPy-Ni(OH)₂ in the nanowire array obtained. Optimal working potential range (i.e., available potential window), charge propagation, and cyclic stability of the electrodes were determined with cyclic voltammetry (CV) at various scan rates. Interestingly, the electrochemical stability window for the aqueous electrolyte at PPy-Ni(OH)₂ nanowire array electrode was remarkably wider (ca. 2 times) in comparison with the non-modified PPy electrode. The capacitance values, calculated from cyclic voltammetry performed at 20 mV s^-1, were 25 F cm^-2 for PPy and 75 F cm^-2 for PPy-Ni(OH)₂ array electrodes. The cyclic stability of the PPy nanowire array electrode up to 100 cycles showed a capacitance fade of about 13%.

The asbestos-carbon nanotube analogy: An update

Nanotechnology is an emerging industry based on commercialization of materials with one or more dimensions of 100 nm or less. Engineered nanomaterials are currently incorporated into thin films, porous materials, liquid suspensions, or filler/matrix nanocomposites with future applications predicted in energy and catalysis, microelectronics, environmental sensing and remediation, and nanomedicine. Carbon nanotubes are one-dimensional fibrous nanomaterials that physically resemble asbestos fibers. Toxicologic studies in rodents demonstrated that some types of carbon nanotubes can induce mesothelioma, and the World Health Organization evaluated long, rigid multiwall carbon nanotubes as possibly carcinogenic for humans in 2014. This review summarizes key physicochemical similarities and differences between asbestos fibers and carbon nanotubes. The "fiber pathogenicity paradigm" has been extended to include carbon nanotubes as well as other high-aspect-ratio fibrous nanomaterials including metallic nanowires. This paradigm identifies width, length, and biopersistence of high-aspect-ratio fibrous nanomaterials as critical determinants of lung disease, including mesothelioma, following inhalation. Based on recent theoretical modeling studies, a fourth factor, mechanical bending stiffness, will be considered as predictive of potential carcinogenicity. Novel three-dimensional lung tissue platforms provide an opportunity for in vitro screening of a wide range of high aspect ratio fibrous nanomaterials for potential lung toxicity prior to commercialization.

Thermo-Sensitive Nanomaterials: Recent Advance in Synthesis and Biomedical Applications

Progress in nanotechnology has enabled us to open many new fronts in biomedical research by exploiting the peculiar properties of materials at the nanoscale. The thermal sensitivity of certain materials is a highly valuable property because it can be exploited in many promising applications, such as thermo-sensitive drug or gene delivery systems, thermotherapy, thermal biosensors, imaging, and diagnosis. This review focuses on recent advances in thermo-sensitive nanomaterials of interest in biomedical applications. We provide an overview of the different kinds of thermoresponsive nanomaterials, discussing their potential and the physical mechanisms behind their thermal response. We thoroughly review their applications in biomedicine and finally discuss the current challenges and future perspectives of thermal therapies.

Multifunctional Supramolecular Materials Constructed from Polypyrrole@UiO-66 Nanohybrids and Pillararene Nanovalves for Targeted Chemophotothermal Therapy

Multifunctional supramolecular nanomaterials capable of targeted and multimodal therapy hold great potential to improve the efficiency of cancer therapeutics. Herein, we report a proof-of-concept nanoplatform for effective chemophotothermal therapy via the integration of folic acid-based active targeting and supramolecular nanovalves-based passive targeting. Inspired by facile surface engineering and designable layer-by-layer assembly concept, we design and synthesize PPy@UiO-66@WP6@PEI-Fa nanoparticles (PUWPFa NPs) to achieve efficient synergistic chemophotothermal therapy, taking advantage of the desirable photothermal conversion capability of polypyrrole nanoparticles (PPy NPs) and high drug-loading capacity of hybrid scaffolds. Significantly, pillararene-based pseudorotaxanes as pH/temperature dual-responsive nanovalves allow targeted drug delivery in pathological environment with sustained release over 4 days, which is complementary to photothermal therapy, and folic acid-conjugated polyethyleneimine (PEI-Fa) at the outmost layer through electrostatic interactions is able to enhance tumor-targeting and therapeutic efficiency. Such PUWPFa NPs showed efficient synergistic chemophotothermal therapy of cervical cancer both in vitro and in vivo. The present strategy offers not only the distinctly targeted drug delivery and release, but also excellent tumor inhibition efficacy of simultaneous chemophotothermal therapy, opening a new avenue for effective cancer treatment.

Enhancing research for undergraduates through a nanotechnology training program that utilizes analytical and bioanalytical tools

Nanotechnology is a broad field combining traditional scientific disciplines; however, analytical chemistry plays an important role in material design, synthesis, characterization, and application. This article emphasizes the uniqueness of nanotechnology and the importance of providing high-quality undergraduate research experiences to both attract and retain talented individuals to the field of nanotechnology. In response to this need to develop a strong and sustainable nanotechnology work force, strategies to create authentic research experiences are considered within the framework of an interdisciplinary nanotechnology environment at West Virginia University. The program, named NanoSAFE Research Experiences for Undergraduates (REU), embeds students in different departments at West Virginia University and in research laboratories within the National Institute of Occupational Safety and Health. A large number of participants have little or no prior research experience and a strong effort is made to recruit applicants from under-represented populations. Components designed to foster research proficiency include frequent reporting, a strong peer-network, and training for secondary mentors. Evidence, which includes student publications and assessment findings demonstrating self-efficacy, is discussed to substantiate the viability of the strategies used in the 2016-2018 program. Graphical abstract ᅟ.

An Alternative Route to Obtain Carbon Quantum Dots from Photoluminescent Materials in Peat

Peat, an organic compound easily found in the soil (easy to acquire), has more than 50% elemental carbon in its composition and can be used as raw material to produce carbon quantum dots (CQDs, C-dots, Carbon Dots). In this work we describe two simple and low-cost routes for the acquisition of these photoluminescent materials based on peat. The final products were characterized by Fourier transform infrared spectroscopy (FTIR), absorption (UV-Vis) and emission (PL) spectra and high-resolution transmission electron microscopy (HRTEM). The produced CQDs have an average size of 3.5 nm and exhibit coloration between blue and green. In addition, it is possible to produce photoluminescence by means of the aromatic compounds also present in the composition of the peat, in turn exhibiting an intense green coloration. The results indicate great versatility of peat for the production of photoluminescent materials.

IRMOF-3: A fluorescent nanoscale metal organic frameworks for selective sensing of glucose and Fe (III) ions without any modification

The amine functionalized isoreticular metal-organic framework-3 (IRMOF-3) is synthesized by hydrothermal method. Till now, it's widely used in the area of gas separation, adsorption, and catalysis due to large surface area, structural stability, and tunability. Here, we have reported the use of fluorescent nanoscale IRMOF-3 for highly selective detection of glucose as well as Fe³⁺ ions without any modification. This is due to NH₂ and COOH groups are present on the surface of IRMOF-3 to bind cis-diols of the glucose molecule via host-guest interaction, and Fe³⁺ ions via ligand to metal charge transfer. The Synthesized IRMOF-3 has average diameter of 160 ± 20 nm and interestingly possess deep blue fluorescent emission spectra at 460 nm with quantum yield 17.3%. Using fluorometric assay, the limit of detection (LOD) of glucose and Fe³⁺ ions was found to be 0.56 μM and 4.2 nM respectively. More importantly, the synthesized IRMOF-3 is also utilized for detection of glucose and Fe³⁺ ions in bio-environmental samples.

Reflectance difference microscopy for nanometre thickness microstructure measurements

The discontinuity of medium at the boundary produces optically anisotropic response which makes reflectance difference microscopy (RDM) a potential method for nanometre-thickness microstructure measurements. Here, we present the methodology of RDM for the edge measurement of ultrathin microstructure. The RD signal of microstructure's boundary is mathematically deduced according to boundary condition and polarization optics theory. A normal-incidence RDM setup was built simply with one linear polarizer, one liquid crystal variable retarder and one 5 × objective. Then, the performance of the developed setup was identified using homogenous reflection mirror and high quality linear polarizer. For demonstration, microstructures array with 100 nm step height was measured. The results show that the RD signal is sensitive to the edge and its sign reflects the change direction of the edge. Furthermore, a height sensitivity of better than 10 nm and a spatial resolution of ∼3 μm offer this technique a good candidate for characterizing ultrathin microstructures.

Recent developments in nanotechnology transforming the agricultural sector: a transition replete with opportunities

The applications and benefits of nanotechnology in the agricultural sector have attracted considerable attention, particularly in the invention of unique nanopesticides and nanofertilisers. The contemporary developments in nanotechnology are acknowledged and the most significant opportunities awaiting the agriculture sector from the recent scientific and technical literature are addressed. This review discusses the significance of recent trends in nanomaterial-based sensors available for the sustainable management of agricultural soil, as well as the role of nanotechnology in detection and protection against plant pathogens, and for food quality and safety. Novel nanosensors have been reported for primary applications in improving crop practices, food quality, and packaging methods, thus will change the agricultural sector for potentially better and healthier food products. Nanotechnology is well-known to play a significant role in the effective management of phytopathogens, nutrient utilisation, controlled release of pesticides, and fertilisers. Research and scientific gaps to be overcome and fundamental questions have been addressed to fuel active development and application of nanotechnology. Together, nanoscience, nanoengineering, and nanotechnology offer a plethora of opportunities, proving a viable alternative in the agriculture and food processing sector, by providing a novel and advanced solutions. © 2017 Society of Chemical Industry.

A Simple Route to Porous Graphene from Carbon Nanodots for Supercapacitor Applications

A facile method to convert biomolecule-based carbon nanodots (CNDs) into high-surface-area 3D-graphene networks with excellent electrochemical properties is presented. Initially, CNDs are synthesized by microwave-assisted thermolysis of citric acid and urea according to previously published protocols. Next, the CNDs are annealed up to 400 °C in a tube furnace in an oxygen-free environment. Finally, films of the thermolyzed CNDs are converted into open porous 3D turbostratic graphene (3D-ts-graphene) networks by irradiation with an infrared laser. Based upon characterizations using scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and Raman spectroscopy, a feasible reaction mechanism for both the thermolysis of the CNDs and the subsequent laser conversion into 3D-ts-graphene is presented. The 3D-ts-graphene networks show excellent morphological properties, such as a hierarchical porous structure and a high surface area, as well as promising electrochemical properties. For example, nearly ideal capacitive behavior with a volumetric capacitance of 27.5 mF L^-1 is achieved at a current density of 560 A L^-1 , which corresponds to an energy density of 24.1 mWh L^-1 at a power density of 711 W L^-1 . Remarkable is the extremely fast charge-discharge cycling rate with a time constant of 3.44 ms.

Unraveling the molecular mechanism of photosynthetic toxicity of highly fluorescent silver nanoclusters to Scenedesmus obliquus

While the discovery of numerous attractive properties of silver at the nanoscale has increased their demand in many sectors including medicine, optics, sensing, painting and cosmetics, it has also raised wide public concerns about their effect on living organisms in aquatic environment. Despite the continuous effort to understand the various aspects of the toxicity of silver nanomaterials, the molecular level understanding on their cytotoxicity mechanism to biological organisms has remained unclear. Herein, we demonstrated the underlying mechanism of the photosynthetic toxicity against green algae namely, Scenedesmus obliquus by using an emerging silver nanomaterial, called silver nanoclusters (defined as r-Ag NCs). By exploiting the unique fluorescence properties of r-Ag NCs along with various other analytical/biological tools, we proposed that the photosynthetic toxicity of r-Ag NCs was largely attributed to the "joint-toxicity" effect of particulate form of r-Ag NCs and its released Ag+, which resulted in the disruption of the electron transport chain of light reaction and affected the content of key enzymes (RuBP carboxylase/ oxygenase) of Calvin cycle of algae cells. We believe that the present study can also be applied to the assessment of the ecological risk derived from other metal nanoparticles.

Emerging Trends in Micro- and Nanoscale Technologies in Medicine: From Basic Discoveries to Translation

We discuss the state of the art and innovative micro- and nanoscale technologies that are finding niches and opening up new opportunities in medicine, particularly in diagnostic and therapeutic applications. We take the design of point-of-care applications and the capture of circulating tumor cells as illustrative examples of the integration of micro- and nanotechnologies into solutions of diagnostic challenges. We describe several novel nanotechnologies that enable imaging cellular structures and molecular events. In therapeutics, we describe the utilization of micro- and nanotechnologies in applications including drug delivery, tissue engineering, and pharmaceutical development/testing. In addition, we discuss relevant challenges that micro- and nanotechnologies face in achieving cost-effective and widespread clinical implementation as well as forecasted applications of micro- and nanotechnologies in medicine.

Engineering the Charge Transport of Ag Nanocrystals for Highly Accurate, Wearable Temperature Sensors through All-Solution Processes

All-nanocrystal (NC)-based and all-solution-processed wearable resistance temperature detectors (RTDs) are introduced. The charge transport mechanisms of Ag NC thin films are engineered through various ligand treatments to design high performance RTDs. Highly conductive Ag NC thin films exhibiting metallic transport behavior with high positive temperature coefficients of resistance (TCRs) are achieved through tetrabutylammonium bromide treatment. Ag NC thin films showing hopping transport with high negative TCRs are created through organic ligand treatment. All-solution-based, one-step photolithography techniques that integrate two distinct opposite-sign TCR Ag NC thin films into an ultrathin single device are developed to decouple the mechanical effects such as human motion. The unconventional materials design and strategy enables highly accurate, sensitive, wearable and motion-free RTDs, demonstrated by experiments on moving or curved objects such as human skin, and simulation results based on charge transport analysis. This strategy provides a low cost and simple method to design wearable multifunctional sensors with high sensitivity which could be utilized in various fields such as biointegrated sensors or electronic skin.

Electrochemical performance of Ti3C2Tx MXene in aqueous media: towards ultrasensitive H2O2 sensing

An extensive characterization of pristine and oxidized Ti₃C₂T_x (T: =O, -OH, -F) MXene showed that exposure of MXene to an anodic potential in the aqueous solution oxidizes the nanomaterial forming TiO₂ layer or TiO₂ domains with subsequent TiO₂ dissolution by F^- ions, making the resulting nanomaterial less electrochemically active compared to the pristine Ti₃C₂T_x. The Ti₃C₂T_x could be thus applied for electrochemical reactions in a cathodic potential window i.e. for ultrasensitive detection of H₂O₂ down to nM level with a response time of approx. 10 s. The manuscript also shows electrochemical behavior of Ti₃C₂T_x modified electrode towards oxidation of NADH and towards oxygen reduction reactions.

Structure and Function of Adsorbed Hemoglobin on Silica Nanoparticles: Relationship between the Adsorption Process and the Oxygen Binding Properties

The connection between the mechanisms of protein adsorption on nanoparticles and the structural and functional properties of the adsorbed protein often remains unclear. We investigate porcine hemoglobin adsorption on silica nanoparticles, and we analyze the structural and functional modifications of adsorbed hemoglobin by UV-vis spectrophotometry, circular dichroism, and oxygen binding measurement. The structural analysis of adsorbed hemoglobin on silica nanoparticles reveals a significant loss of secondary structure and a preservation of the heme electronic structure. However, adsorbed hemoglobin retains its quaternary structure and exhibits an enhanced oxygen affinity with cooperative binding. Moreover, the structural and functional modifications are fully reversible after complete desorption from silica nanoparticles at pH 8.7. The tunable adsorption and desorption of hemoglobin on SNPs with pH change, and the full control of hemoglobin activity by pH, temperature, and the addition of inorganic phosphate effectors opens the way to an interesting system whereby protein adsorption on nanoparticles can allow for full control over hemoglobin oxygen binding activity. Our results suggest that adsorption of hemoglobin on silica nanoparticles leads to a new structural, functional, and dynamic state with full reversibility in a way that significantly differs from protein denaturation.

Polymer Conformation under Confinement

The conformation of polymer chains under confinement is investigated in intercalated polymer/layered silicate nanocomposites. Hydrophilic poly(ethylene oxide)/sodium montmorillonite, PEO/Na⁺-MMT, hybrids were prepared utilizing melt intercalation with compositions where the polymer chains are mostly within the ~1 nm galleries of the inorganic material. The polymer chains are completely amorphous in all compositions even at temperatures where the bulk polymer is highly crystalline. Attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR) is utilized to investigate the conformation of the polymer chains over a broad range of temperatures from below to much higher than the bulk polymer melting temperature. A systematic increase of the gauche conformation relatively to the trans is found with decreasing polymer content both for the C⁻C and the C⁻O bonds that exist along the PEO backbone indicating that the severe confinement and the proximity to the inorganic surfaces results in a more disordered state of the polymer.