Behavior of Germanium and Silicon Nanowire Anodes with Ionic Liquid Electrolytes

Melt-casted Li1.5Al0.3Mg0.1Ge1.6(PO4)3 glass ceramic electrolytes: A comparative study on the effect of different oxide doping

The development of Li-ion conducting solid-state electrolytes (SSEs) is crucial to achieve increased energy density, operative reliability, and unprecedented safety to replace the state-of-the-art Li-ion battery (LIB). In this regard, we here present the successful melt-casting synthesis of a MgO-added NASICON-type LAGP glass-ceramic electrolyte with composition Li1.5Al0.3Mg0.1Ge1.6(PO4)3, namely LAMGP. The effects of three different additional oxides are investigated, with the aim to improve grain cohesion and consequently enhance Li-ion conductivity. Specifically, yttrium oxide (Y2O3, 5 mol%), boron oxide (B2O3, 0.7 mol%) and silicon oxide (SiO2, 2.4 %mol) are added, yielding LAMGP-Y, LAMGP-B and LAMGP-Si, respectively. Their effects are exhaustively compared in terms of thermal, crystalline, structural/morphological and ion conducting features. Among the three oxides, B2O3 is able to positively act on grain boundaries without bringing along grains deformation and insulating secondary phases formation, achieving enhanced ionic conductivity of 0.21 mS cm-1 at 20 °C as compared to 0.08 mS cm-1 for a commercial LAGP subjected to the same thermal treatment. A remarkable anodic oxidation stability up to 4.8 V vs Li+/Li is assessed by LAMGP-B system, which accounts for promising prospects for its use in combination with high-energy (high-V) cathodes.

Engineering CoP Alloy Foil to a Well-Designed Integrated Electrode Toward High-Performance Electrochemical Energy Storage

Nanostructured integrated electrodes with binder-free design show great potential to solve the ever-growing problems faced by currently commercial lithium-ion batteries such as insufficient power and energy densities. However, there are still many challenging problems limiting practical application of this emerging technology, in particular complex manufacturing process, high fabrication cost, and low loading mass of active material. Different from existing fabrication strategies, here using a CoP alloy foil as a precursor  a simple neutral salt solution-mediated electrochemical dealloying method to well address the above issues is demonstrated. The resultant freestanding mesoporous np-Co(OH)_x /Co₂ P product possesses not only active compositions of high specific capacity and large electrode packing density (>3.0 g cm^-3 ) to meet practical capacity requirements, high-conductivity and well-developed nanoporous framework to achieve simultaneously fast ion and electron transfer, but also interconnected ligaments and suitable free space to ensure strong structural stability. Its comprehensively excellent electrochemical energy storage (EES) performances in both lithium/sodium-ion batteries and lithium-ion capacitors can further illustrate the effectiveness of the integrated electrode preparation strategy, such as remarkable reversible specific capacities/capacitances, dominated pseudo-capacitive EES mechanism, and ultra-long cycling life. This study provides new insights into preparation and design of high-performance integrated electrodes for practical applications.

One-Step Grown Carbonaceous Germanium Nanowires and Their Application as Highly Efficient Lithium-Ion Battery Anodes

Developing a simple, cheap, and scalable synthetic method for the fabrication of functional nanomaterials is crucial. Carbon-based nanowire nanocomposites could play a key role in integrating group IV semiconducting nanomaterials as anodes into Li-ion batteries. Here, we report a very simple, one-pot solvothermal-like growth of carbonaceous germanium (C-Ge) nanowires in a supercritical solvent. C-Ge nanowires are grown just by heating (380-490 °C) a commercially sourced Ge precursor, diphenylgermane (DPG), in supercritical toluene, without any external catalysts or surfactants. The self-seeded nanowires are highly crystalline and very thin, with an average diameter between 11 and 19 nm. The amorphous carbonaceous layer coating on Ge nanowires is formed from the polymerization and condensation of light carbon compounds generated from the decomposition of DPG during the growth process. These carbonaceous Ge nanowires demonstrate impressive electrochemical performance as an anode material for Li-ion batteries with high specific charge values (>1200 mAh g^-1 after 500 cycles), greater than most of the previously reported for other "binder-free" Ge nanowire anode materials, and exceptionally stable capacity retention. The high specific charge values and impressively stable capacity are due to the unique morphology and composition of the nanowires.

A Nanowire Nest Structure Comprising Copper Silicide and Silicon Nanowires for Lithium-Ion Battery Anodes with High Areal Loading

High loading (>1.6 mg cm^-2 ) of Si nanowires (NWs) is achieved by seeding the growth from a dense array of Cu₁₅ Si₄ NWs using tin seeds. A one-pot synthetic approach involves the direct growth of CuSi NWs on Cu foil that acts as a textured surface for Sn adhesion and Si NW nucleation. The high achievable Si NW loading is enabled by the high surface area of CuSi NWs and bolstered by secondary growth of Si NWs as branches from both Si and CuSi NW stems, forming a dense Si active layer, interconnected with an electrically conducting CuSi array (denoted Si/CuSi). When employed as Li-ion battery anodes, the Si/CuSi nest structure demonstrates impressive rate performance, reaching 4.1 mAh cm^-2 at C/20, 3.1 mAh cm^-2 at C/5, and 0.8 mAh cm^-2 at 6C. Also, Si/CuSi shows remarkable long-term stability, delivering a stable areal capacity of 2.2 mAh cm^-2 after 300 cycles. Overall, complete anode fabrication is achieved within a single reaction by employing an inexpensive Sn powder approach.

Facile and Efficient Fabrication of Branched Si@C Anode with Superior Electrochemical Performance in LIBs

One-dimensional Si nanostructures with carbon coating (1D Si@C) show great potential in lithium ion batteries (LIBs) due to small volume expansion and efficient electron transport. However, 1D Si@C anode with large area capacity still suffers from limited cycling stability. Herein, a novel branched Si architecture is fabricated through laser processing and dealloying. The branched Si, composed of both primary and interspaced secondary dendrites with diameters under 100 nm, leads to improved area capacity and cycling stability. By coating a carbon layer, the branched Si@C anode shows gravimetric capacity of 3059 mAh g^-1 (1.14 mAh cm^-2 ). At a higher rate of 3 C, the capacity is 813 mAh g^-1 , which retained 759 mAh g^-1 after 1000 cycles at 1 C. The area capacity is further improved to 1.93 mAh cm^-2 and remained over 92% after 100 cycles with a mass loading of 0.78 mg cm^-2 . Furthermore, the full-cell configuration exhibits energy density of 405 Wh kg^-1 and capacity retention of 91% after 200 cycles. The present study demonstrates that laser-produced dendritic microstructure plays a critical role in the fabrication of the branched Si and the proposed method provides new insights into the fabrication of Si nanostructures with facility and efficiency.

Alloying Germanium Nanowire Anodes Dramatically Outperform Graphite Anodes in Full-Cell Chemistries over a Wide Temperature Range

The electrochemical performance of Ge, an alloying anode in the form of directly grown nanowires (NWs), in Li-ion full cells (vs LiCoO₂) was analyzed over a wide temperature range (-40 to 40 °C). LiCoO₂||Ge cells in a standard electrolyte exhibited specific capacities 30× and 50× those of LiCoO₂||C cells at -20 and -40 °C, respectively. We further show that propylene carbonate addition further improved the low-temperature performance of LiCoO₂||Ge cells, achieving a specific capacity of 1091 mA h g^-1 after 400 cycles when charged/discharged at -20 °C. At 40 °C, an additive mixture of ethyl methyl carbonate and lithium bis(oxalato)borate stabilized the capacity fade from 0.22 to 0.07% cycle^-1. Similar electrolyte additives in LiCoO₂||C cells did not allow for any gains in performance. Interestingly, the capacity retention of LiCoO₂||Ge improved at low temperatures due to delayed amorphization of crystalline NWs, suppressing complete lithiation and high-order Li₁₅Ge₄ phase formation. The results show that alloying anodes in suitably configured electrolytes can deliver high performance at the extremes of temperature ranges where electric vehicles operate, conditions that are currently not viable for commercial batteries without energy-inefficient temperature regulation.

Influence of Carbonate-Based Additives on the Electrochemical Performance of Si NW Anodes Cycled in an Ionic Liquid Electrolyte

Addition of electrolyte additives (ethylene or vinylene carbonate) is shown to dramatically improve the cycling stability and capacity retention (1600 mAh g^-1) of Si nanowires (NWs) in a safe ionic liquid (IL) electrolyte (0.1LiTFSI-0.6PYR₁₃FSI-0.3PYR₁₃TFSI). We show, using postmortem SEM and TEM, a distinct difference in morphologies of the active material after cycling in the presence or absence of the additives. The difference in performance is shown by postmortem XPS analysis to arise from a notable increase in irreversible silicate formation in the absence of the carbonate additives. The composition of the solid electrolyte interphase (SEI) formed at the active material surface was further analyzed using XPS as a function of the IL components revealing that the SEI was primarily made up of N-, F-, and S-containing compounds from the degradation of the TFSI and FSI anions.

Exploring Large Ductility in Cellulose Nanopaper Combining High Toughness and Strength

Cellulose nanopaper is a strong lightweight material made from renewable resources with a wide range of potential applications, from membranes to electronic displays. Most studies on nanopaper target high mechanical strength, which compromises ductility and toughness. Herein, we demonstrate the fabrication of highly ductile and tough cellulose nanopaper via mechanical fibrillation of hemicellulose-rich wood fibers and dispersion of the obtained cellulose nanofibrils (CNFs) in an ionic liquid (IL)-water mixture. This treatment allows hemicellulose swelling, which leads to dissociation of CNF bundles into highly disordered long flexible fibrils and the formation of a nanonetwork as supported by cryogenic transmission electron microscopy (cryo-TEM) imaging. Rheology of the suspensions shows a 300-fold increase in storage and loss moduli of CNF-IL-water suspensions, compared to their CNF-water counterparts. The nanopaper prepared by removing the IL-water shows a combination of large elongation (up to 35%), high strength (260 MPa), and toughness as high as 51 MJ/m³, because of efficient interfibrillar slippage and energy dissipation in the highly disordered isotropic structure. This work provides a nanostructure-engineered strategy of making ductile and tough cellulose nanopaper.

Porous SnO2/C Nanofiber Anodes and LiFePO4/C Nanofiber Cathodes with a Wrinkle Structure for Stretchable Lithium Polymer Batteries with High Electrochemical Performance

Stretchable lithium batteries have attracted considerable attention as components in future electronic devices, such as wearable devices, sensors, and body-attachment healthcare devices. However, several challenges still exist in the bid to obtain excellent electrochemical properties for stretchable batteries. Here, a unique stretchable lithium full-cell battery is designed using 1D nanofiber active materials, stretchable gel polymer electrolyte, and wrinkle structure electrodes. A SnO2/C nanofiber anode and a LiFePO4/C nanofiber cathode introduce meso- and micropores for lithium-ion diffusion and electrolyte penetration. The stretchable full-cell consists of an elastic poly(dimethylsiloxane) (PDMS) wrapping film, SnO2/C and LiFePO4/C nanofiber electrodes with a wrinkle structure fixed on the PDMS wrapping film by an adhesive polymer, and a gel polymer electrolyte. The specific capacity of the stretchable full-battery is maintained at 128.3 mAh g-1 (capacity retention of 92%) even after a 30% strain, as compared with 136.8 mAh g-1 before strain. The energy densities are 458.8 Wh kg-1 in the released state and 423.4 Wh kg-1 in the stretched state (based on the electrode), respectively. The high capacity and stability in the stretched state demonstrate the potential of the stretchable battery to overcome its limitations.

Advanced Matrixes for Binder-Free Nanostructured Electrodes in Lithium-Ion Batteries

Commercial lithium-ion batteries (LIBs), limited by their insufficient reversible capacity, short cyclability, and high cost, are facing ever-growing requirements for further increases in power capability, energy density, lifespan, and flexibility. The presence of insulating and electrochemically inactive binders in commercial LIB electrodes causes uneven active material distribution and poor contact of these materials with substrates, reducing battery performance. Thus, nanostructured electrodes with binder-free designs are developed and have numerous advantages including large surface area, robust adhesion to substrates, high areal/specific capacity, fast electron/ion transfer, and free space for alleviating volume expansion, leading to superior battery performance. Herein, recent progress on different kinds of supporting matrixes including metals, carbonaceous materials, and polymers as well as other substrates for binder-free nanostructured electrodes in LIBs are summarized systematically. Furthermore, the potential applications of these binder-free nanostructured electrodes in practical full-cell-configuration LIBs, in particular fully flexible/stretchable LIBs, are outlined in detail. Finally, the future opportunities and challenges for such full-cell LIBs based on binder-free nanostructured electrodes are discussed.

Germanium tin alloy nanowires as anode materials for high performance Li-ion batteries

The combination of two active Li-ion materials (Ge and Sn) can result in improved conduction paths and higher capacity retention. Here we report for the first time, the implementation of Ge_1-x Sn _x alloy nanowires as anode materials for Li-ion batteries. Ge_1-x Sn _x alloy nanowires have been successfully grown via vapor-liquid-solid technique directly on stainless steel current collectors. Ge_1-x Sn _x (x = 0.048) nanowires were predominantly seeded from the Au_0.80Ag_0.20 catalysts with negligible amount of growth was also directly catalyzed from stainless steel substrate. The electrochemical performance of the the Ge_1-x Sn _x nanowires as an anode material for Li-ion batteries was investigated via galvanostatic cycling and detailed analysis of differential capacity plots (DCPs). The nanowire electrodes demonstrated an exceptional capacity retention of 93.4% from the 2nd to the 100th charge at a C/5 rate, while maintaining a specific capacity value of ∼921 mAh g^-1 after 100 cycles. Voltage profiles and DCPs revealed that the Ge_1-x Sn _x nanowires behave as an alloying mode anode material, as reduction/oxidation peaks for both Ge and Sn were observed, however it is clear that the reversible lithiation of Ge is responsible for the majority of the charge stored.

Tunable Core-Shell Nanowire Active Material for High Capacity Li-Ion Battery Anodes Comprised of PECVD Deposited aSi on Directly Grown Ge Nanowires

Herein, we report the formation of core@shell nanowires (NWs) comprised of crystalline germanium NW cores with amorphous silicon shells (Ge@aSi) and their performance as a high capacity Li-ion battery anode material. The Ge NWs were synthesized directly from the current collector in a solvent vapor growth (SVG) system and used as hosts for the deposition of the Si shells via a plasma-enhanced chemical vapor deposition (PECVD) process utilizing an expanding thermal plasma (ETP) source. The secondary deposition allows for the preparation of Ge@aSi core@shell structures with tunable Ge/Si ratios (2:1 and 1:1) and superior gravimetric and areal capacities, relative to pure Ge. The binder-free anodes exhibited discharge capacities of up to 2066 mAh/g and retained capacities of 1455 mAh/g after 150 cycles (for the 1:1 ratio). The 2:1 ratio showed a minimal ∼5% fade in capacity between the 20th and 150th cycles. Ex situ microscopy revealed a complete restructuring of the active material to an interconnected Si_{1- x}Ge _x morphology due to repeated lithiation and delithiation. In full-cell testing, a prelithiation step counteracted first cycle Li consumption and resulted in a 2-fold improvement to the capacity of the prelithiated cell versus the unconditioned full-cells. Remarkable rate capability was also delivered where capacities of 750 mAh/g were observed at a rate of 10 C.

Silicon-Based Anodes with Long Cycle Life for Lithium-Ion Batteries Achieved by Significant Suppression of Their Volume Expansion in Ionic-Liquid Electrolyte

Elemental Si has a high theoretical capacity and has attracted attention as an anode material for high energy density lithium-ion batteries. Rapid capacity fading is the main problem with Si-based electrodes; this is mainly because of a massive volume change in Si during lithiation-delithiation. Here, we report that combining an ionic-liquid electrolyte with a charge capacity limit of 1000 mA h g^-1 significantly suppresses Si volume expansion, improving the cycle life. Phosphorus-doping of Si also enhances the suppression and increases the Li⁺ diffusion coefficient. In contrast, the Si layer expands significantly in an organic electrolyte even with the charge capacity limit and even in an ionic-liquid electrolyte without the limit. We demonstrated that the homogeneously distributed Si lithiation-delithiation, phase-transition control from the Si to Li-rich Li-Si alloy phases, formation of a surface film with structural and/or mechanical stability, and faster Li⁺ diffusion contribute to suppressing Si volume expansion.

Enhancing the performance of germanium nanowire anodes for Li-ion batteries by direct growth on textured copper

Capacity retention of directly grown Ge nanowire anodes is enhanced by replacing stainless steel with textured Cu foil current collectors.

Axial Si-Ge Heterostructure Nanowires as Lithium-Ion Battery Anodes

Here, we report the application of axially heterostructured nanowires consisting of alternating segments of silicon and germanium with a tin seed as lithium-ion battery anodes. During repeated lithiation and delithiation, the heterostructures completely rearrange into a porous network of homogeneously alloyed Si_{1- x}Ge _x ligaments. The transformation was characterized through ex situ TEM, STEM, and Raman spectroscopy. Electrochemical analysis was conducted on the heterostructure nanowires with discharge capacities in excess of 1180 mAh/g for 400 cycles (C/5) and capacities of up to 613 mAh/g exhibited at a rate of 10 C.

Stress-Tolerant Nanoporous Germanium Nanofibers for Long Cycle Life Lithium Storage with High Structural Stability

Nanowires (NWs) synthesized via chemical vapor deposition (CVD) have demonstrated significant improvement in lithium storage performance along with their outstanding accommodation of large volume changes during the charge/discharge process. Nevertheless, NW electrodes have been confined to the research level due to the lack of scalability and severe side reactions by their high surface area. Here, we present nanoporous Ge nanofibers (NPGeNFs) having moderate nanoporosity via a combination of simple electrospinning and a low-energetic zincothermic reduction reaction. In contrast with the CVD-assisted NW growth, our method provides high tunability of macro/microscopic morphologies such as a porosity, length, and diameter of the nanoscale 1D structures. Significantly, the customized NPGeNFs showed a highly suppressed volume expansion of less than 15% (for electrodes) after full lithation and excellent durability with high lithium storage performance over 500 cycles. Our approach offers effective 1D nanostructuring with highly customized geometries and can be extended to other applications including optoelectronics, catalysis, and energy conversion.

Hierarchical Carbon-Coated Ball-Milled Silicon: Synthesis and Applications in Free-Standing Electrodes and High-Voltage Full Lithium-Ion Batteries

Lithium-ion batteries have been regarded as one of the most promising energy storage devices, and development of low-cost batteries with high energy density is highly desired so that the cost per watt-hour ($/Wh) can be minimized. In this work, we report using ball-milled low-cost silicon (Si) as the starting material and subsequent carbon coating to produce low-cost hierarchical carbon-coated (HCC) Si. The obtained particles prepared from different Si sources all show excellent cycling performance of over 1000 mAh/g after 1000 cycles. Interestingly, we observed in situ formation of porous Si, and it is well confined in the carbon shell based on postcycling characterization of the hierarchical carbon-coated metallurgical Si (HCC-M-Si) particles. In addition, lightweight and free-standing electrodes consisting of the HCC-M-Si particles and carbon nanofibers were fabricated, which achieved 1015 mAh/g after 100 cycles based on the total mass of the electrodes. Compared with conventional electrodes, the lightweight and free-standing electrodes significantly improve the energy density by 745%. Furthermore, LiCoO₂ and LiNi_0.5Mn_1.5O₄ cathodes were used to pair up with the HCC-M-Si anode to fabricate full cells. With LiNi_0.5Mn_1.5O₄ as cathode, an energy density up to 547 Wh/kg was achieved by the high-voltage full cell. After 100 cycles, the full cell with a LiNi_0.5Mn_1.5O₄ cathode delivers 46% more energy density than that of the full cell with a LiCoO₂ cathode. The systematic investigation on low-cost Si anodes together with their applications in lightweight free-standing electrodes and high-voltage full cells will shed light on the development of high-energy Si-based lithium-ion batteries for real applications.

Multiscale Engineered Si/SiO x Nanocomposite Electrodes for Lithium-Ion Batteries Using Layer-by-Layer Spray Deposition

Si-based high-capacity materials have gained much attention as an alternative to graphite in Li-ion battery anodes. Although Si additions to graphite anodes are now commercialized, the fraction of Si that can be usefully exploited is restricted due to its poor cyclability arising from the large volume changes during charge/discharge. Si/SiO _x nanocomposites have also shown promising behavior, such as better capacity retention than Si alone because the amorphous SiO _x helps to accommodate the volume changes of the Si. Here, we demonstrate a new electrode architecture for further advancing the performance of Si/SiO _x nanocomposite anodes using a scalable layer-by-layer atomization spray deposition technique. We show that particulate C interlayers between the current collector and the Si/SiO _x layer and between the separator and the Si/SiO _x layer improved electrical contact and reduced irreversible pulverization of the Si/SiO _x significantly. Overall, the multiscale approach based on microstructuring at the electrode level combined with nanoengineering at the material level improved the capacity, rate capability, and cycling stability compared to that of an anode comprising a random mixture of the same materials.

Low temperature solution synthesis of silicon, germanium and Si–Ge axial heterostructures in nanorod and nanowire form

Herein, we report the formation of silicon, germanium and more complex Si–Si_xGe_1−x and Si–Ge axial 1D heterostructures, at low temperatures in solution. The incorporation of a reducing agent into the reaction is shown to be effective to lower precursor decomposition temperatures.

Ionic liquids and derived materials for lithium and sodium batteries

A comprehensive review of various applications of ionic liquids and derived materials in lithium and sodium batteries with an emphasis on recent advances.

Reinforcing Germanium Electrode with Polymer Matrix Decoration for Long Cycle Life Rechargeable Lithium Ion Batteries

Germanium is a promising anode material for lithium ion batteries because of its high theoretical specific capacity and low operation voltage. However, a significant challenge in using Ge-based anodes is the large volume variation during cycling that causes pulverization and capacity fade. Despite intense studies in the past decade, unsatisfactory cycling stability of the Ge-based electrodes still impedes their widespread applications. In this study, we demonstrate a high-performance electrode through the synergistic combination of a high-capacity Ge film grown on a three-dimensional current collector and an in situ formed poly(vinylidene fluoride)-hexafluoropropene/SiO₂ protective layer. Specifically, the polymer matrix is in continuous contact with the surface of the Ge shell, which provides improved mechanical and ionic transport properties. As a highlight, we present impressive cycling stability over 3000 cycles at 1 C rate with a capacity retention as high as 95.7%. Furthermore, the LiCoO₂-Ge full battery operates at an average voltage of 3.3 V at 0.5 C and maintains good electrochemical performance, suggesting great potential for applications in energy storage and conversion devices.