Single-Atom Pt-Functionalized Ti3C2Tx Field-Effect Transistor for Volatile Organic Compound Gas Detection

Accelerating Carrier Transfer in Dual p-n Heterojunctions by Mo-N Coupling to Gain an Ultrahigh-Sensitive NO2 Sensing at Room Temperature for Asthma Diagnosis

Sensitive gas detection performed on a semiconductor in the absence of heat and irradiation activation remains a substantial challenge. In this study, an activation-free NO2 gas sensor was developed by integrating MoOx and conductive polypyrrole (ppy) onto a TiO2 nanotube array (TiNT) through a direct electropolymerization method from simple monomer and metallic ion precursors. Thanks to the abundant defects and Mo-N coupling, a sensing chip based on the as-formed double p-n heterojunctions (TiO2/ppy and ppy/MoOx) exhibited excellent NO2 sensing performances in the absence of any activation, such as ultrahigh response (Rg/Ra = 11.96, 1 ppm), rapid response/recovery abilities (9/11 s), reliable repeatability, high selectivity, and storage stability. Importantly, the Mo-N coupling was shown to play a key role in accelerating the carrier transfer across the ppy/MoOx interface, thus contributing to the outstanding sensing response and kinetics. With a subparts-per-billion theoretical limit of detection (LOD for NO2 = 0.12 ppb), the proposed system represents the best activation-free NO2 chemiresistive sensor reported to date. In addition to a pure target gas, the sensor is capable of analyzing trace NO2 gas in complex exhaled air samples for asthma diagnosis. This study provides new insight for establishing the interface chemistry and tuning the charge transfer involved at semiconductor interfaces, enabling the design of activation-free gas sensors.

Fabricating Cu Single Atom Sites on Ce-BTC for Sensitive and Durable Detection of Multipollutions in Water

Easy and mass preparation of highly efficient single atomic electrocatalysts (SAECs) for wide applications in constructing sensitive electrochemical sensing remains a great challenge. In this work, a heterogeneous SAEC was synthesized by dispersing the copper phthalocyanine (CuPc) molecular on porous Ce-BTC for sensitive, simultaneous detection of NO2- and Bisphenol A (BPA) in water. Herein, CuPc has a typical Cu-nitrogen-carbon (Cu-N4) conjugated structure and highly efficient single-atom catalytic sites with excellent catalytical efficiency and conductivity, while Ce-BTC exhibited adsorption and activation of NO2- and BPA, as well as provided matrix to better disperse CuPc to obtain Cu-N4/Ce-BTC heterogeneous catalysts. Thus, the synergistic effect of CuPc and Ce-BTC enables Cu-N4/Ce-BTC to have a highly efficient catalytic activity and stability. Impressively, the coordinated carbon and nitrogen atoms surrounding the Cu help in activating pollution molecules, which can further enhance the sensitivity. As a result, the Cu-N4/Ce-BTC sensor for detecting NO2- and BPA exhibited good stability, reproducibility, selectivity, and a wide linear range of 20-1000 μM and 10-1000 μM with a low detection limit of 0.5 and 0.15 μM, respectively. This research presents a simple and mass product synthesizing SAECs approach, which will promote the development of SAEC applications in electrochemical sensors.

Atomic Ru Species Driven SnO2-Based Sensor for Highly Sensitive and Selective Detection of H2S in the ppb-Level

Timely and accurate detection of H2S is crucial for preventing serious health issues in both humans and livestock upon exposure. However, metal-oxide-based H2S sensors often suffer from mediocre sensitivity, poor selectivity, or long response/recovery time. Here, an atomic Ru species-driven SnO2-based sensor is fabricated to realize highly sensitive and selective detection of H2S at the parts per billion level as low as 100 ppb. The sensor shows a high sensing response (Rair/Rgas = 310.1) and an ultrafast response time (less than 1 s) to 20 ppm H2S at an operating temperature of 160 °C. Operando SR-FTIR spectroscopic characterizations and DFT calculations prove that the superior sensing properties can be mainly attributed to the driven effect of atomic Ru species on the formation of surface-adsorbed oxygen species on the surface of SnO2, which provides more active sites and enhances the sensing performance of SnO2 for H2S. Furthermore, a lab-made wireless portable H2S monitoring system is developed to rapidly detect the H2S for early warning, suggesting the potential application of the fabricated H2S sensor and monitoring system. This work provides a novel approach for fabricating a highly sensitive and selective gas sensor driven by atomic metal species loaded on metal-oxide semiconductors.

Oxygen Vacancy Mediated-Bismuth Molybdate/Graphitic Carbon Nitride Type II Heterojunction Chemiresistor for Efficient NH3 Detection at Room Temperature

Metal oxide-based chemiresistive gas sensors are expected to play a significant role in assessing human health and evaluating food spoilage. However, the high operating temperature, insufficient limit of detection (LOD), and long response/recovery time restrict their broad application. Herein, 3D Bi2MoO6/2D Eg-C3N4 heterocomposites are developed for advanced NH3 gas sensors with RT operational mode. Utilizing the synergetic engineering of micro-nanostructure, surface oxygen vacancies, and well-defined Type II n-n heterojunctions, BMOCN3 demonstrated superior NH3 sensing properties at 23 °C, including the high response (S = 13.6 at 10 ppm), fast response/recovery speed (8/30 s), excellent selectivity, and low LOD (166 ppb). Based on the experimental, DFT, and MD studies, the improved sensing performance can be ascribed to accelerated charge transfer, superior redox capacity, and improved adsorption/desorption kinetics. Moreover, the practical application in rapid exhaled NH3 biomarker detection of the as-fabricated gas sensor was preliminarily verified. This work highlights that the novel synergetic engineering can effectively modulate the electronic structure and charge transfer, offering a rational solution for room temperature chemiresistive gas sensors.

Smart Gas Sensors: Recent Developments and Future Prospective

Gas sensor is an indispensable part of modern society with wide applications in environmental monitoring, healthcare, food industry, public safety, etc. With the development of sensor technology, wireless communication, smart monitoring terminal, cloud storage/computing technology, and artificial intelligence, smart gas sensors represent the future of gas sensing due to their merits of real-time multifunctional monitoring, early warning function, and intelligent and automated feature. Various electronic and optoelectronic gas sensors have been developed for high-performance smart gas analysis. With the development of smart terminals and the maturity of integrated technology, flexible and wearable gas sensors play an increasing role in gas analysis. This review highlights recent advances of smart gas sensors in diverse applications. The structural components and fundamental principles of electronic and optoelectronic gas sensors are described, and flexible and wearable gas sensor devices are highlighted. Moreover, sensor array with artificial intelligence algorithms and smart gas sensors in "Internet of Things" paradigm are introduced. Finally, the challenges and perspectives of smart gas sensors are discussed regarding the future need of gas sensors for smart city and healthy living.

Recent Advancements in MXene-Based Biosensors for Health and Environmental Applications-A Review

Owing to their unique physicochemical properties, MXenes have emerged as promising materials for biosensing applications. This review paper comprehensively explores the recent advancements in MXene-based biosensors for health and environmental applications. This review begins with an introduction to MXenes and biosensors, outlining various types of biosensors including electrochemical, enzymatic, optical, and fluorescent-based systems. The synthesis methods and characteristics of MXenes are thoroughly discussed, highlighting the importance of these processes in tailoring MXenes for specific biosensing applications. Particular attention is given to the development of electrochemical MXene-based biosensors, which have shown remarkable sensitivity and selectivity in detecting various analytes. This review then delves into enzymatic MXene-based biosensors, exploring how the integration of MXenes with enzymes enhances sensor performance and expands the range of detectable biomarkers. Optical biosensors based on MXenes are examined, focusing on their mechanisms and applications in both healthcare and environmental monitoring. The potential of fluorescent-based MXene biosensors is also investigated, showcasing their utility in imaging and sensing applications. In addition, MXene-based potential wearable biosensors have been discussed along with the role of MXenes in volatile organic compound (VOC) detection for environmental applications. Finally, this paper concludes with a critical analysis of the current state of MXene-based biosensors and provides insights into future perspectives and challenges in this rapidly evolving field.

Materials Containing Single-, Di-, Tri-, and Multi-Metal Atoms Bonded to C, N, S, P, B, and O Species as Advanced Catalysts for Energy, Sensor, and Biomedical Applications

Modifying the coordination or local environments of single-, di-, tri-, and multi-metal atom (SMA/DMA/TMA/MMA)-based materials is one of the best strategies for increasing the catalytic activities, selectivity, and long-term durability of these materials. Advanced sheet materials supported by metal atom-based materials have become a critical topic in the fields of renewable energy conversion systems, storage devices, sensors, and biomedicine owing to the maximum atom utilization efficiency, precisely located metal centers, specific electron configurations, unique reactivity, and precise chemical tunability. Several sheet materials offer excellent support for metal atom-based materials and are attractive for applications in energy, sensors, and medical research, such as in oxygen reduction, oxygen production, hydrogen generation, fuel production, selective chemical detection, and enzymatic reactions. The strong metal-metal and metal-carbon with metal-heteroatom (i.e., N, S, P, B, and O) bonds stabilize and optimize the electronic structures of the metal atoms due to strong interfacial interactions, yielding excellent catalytic activities. These materials provide excellent models for understanding the fundamental problems with multistep chemical reactions. This review summarizes the substrate structure-activity relationship of metal atom-based materials with different active sites based on experimental and theoretical data. Additionally, the new synthesis procedures, physicochemical characterizations, and energy and biomedical applications are discussed. Finally, the remaining challenges in developing efficient SMA/DMA/TMA/MMA-based materials are presented.

Single-Atom Au-Functionalized Mesoporous SnO2 Nanospheres for Ultrasensitive Detection of Listeria monocytogenes Biomarker at Low Temperatures

Semiconductor metal oxide gas sensors have been proven to be capable of detecting Listeria monocytogenes, one kind of foodborne bacteria, through monitoring the characteristic gaseous metabolic product 3-hydroxy-2-butanone. However, the detection still faces challenges because the sensors need to work at high temperatures and output limited gas sensing performance. The present study focuses on the design of single-atom Au-functionalized mesoporous SnO2 nanospheres for the sensitive detection of ppb-level 3-hydroxy-2-butanone at low temperatures (50 °C). The fabricated sensors exhibit high sensitivity (291.5 ppm-1), excellent selectivity, short response time (10 s), and ultralow detection limit (10 ppb). The gas sensors exhibit exceptional efficacy in distinguishing L. monocytogenes from other bacterial strains (e.g., Escherichia coli). Additionally, wireless detection of 3-hydroxy-2-butanone vapor is successfully achieved through microelectromechanical systems sensors, enabling real-time monitoring of the biomarker 3-hydroxy-2-butanone. The superior sensing performance is ascribed to the mesoporous framework with accessible active Au-O-Sn sites in the uniform sensing layer consisting of single-atom Au-modified mesoporous SnO2 nanospheres, and such a feature facilitates the gas diffusion, adsorption, and catalytic conversion of 3-hydroxy-2-butanone molecules in the sensing layer, resulting in excellent sensing signal output at relatively low temperature that is favorable for developing low-energy-consumption gas sensors.

Theoretical Validation of Non-Noble Cu Sites Integrated on SnO2 Nanoflowers for Enhanced Gas Sensing of Ethanethiol at Room Temperature

Ethanethiol (EtSH), being highly toxic, flammable, and explosive, poses significant risks to human health and safety and is capable of causing fires and explosions. Room-temperature detection using chemiresistive gas sensors is essential for managing these risks. However, the gas-sensing performance of conventional metal-oxide sensing materials may be limited by their weak interaction with EtSH at room temperature. Herein, SnO2 nanoflowers assembled with non-noble Cu-site-enriched porous nanosheets were designed and prepared by an in situ self-template pyrolysis synthesis strategy to enable highly sensitive and selective room-temperature detection of EtSH. By regulating the number of non-noble Cu sites, these nanoflowers achieved efficient EtSH sensing with a Ra/Rg value of 11.0 at 50 ppb, ensuring high selectivity, reproducibility, and stability at room temperature. Moreover, a comparative analysis of the room-temperature gas-sensing performance of SnO2 nanoflowers with non-noble Fe- or Ni-site-enriched nanosheets highlights the benefits of non-noble Cu sites for EtSH detection. Density functional theory (DFT) analysis reveals that non-noble Cu sites have a unique affinity for EtSH, offering preferential binding over other gases and explaining the outstanding sensing performance of non-noble Cu-site-enriched nanosheet-assembled SnO2 nanoflowers. The structural and interface engineering of the sensing materials presented in this work provides a promising approach for offering efficient and durable gas sensors operable at room temperature.

Ultrafast and Parts-per-Billion-Level MEMS Gas Sensors by Hetero-Interface Engineering of 2D/2D Cu-TCPP@ZnIn2S4 with Enriched Surface Sulfur Vacancies

The primary challenge for resonant-gravimetric gas sensors is the synchronous improvement of the sensitivity and response time, which is restricted by low adsorption capacity and slow mass transfer in the sensing process and remains a great challenge. In this study, a novel 2D/2D Cu-TCPP@ZnIn2S4 composite is successfully constructed, in which Cu-TCPP MOF is used as a core substrate for the growth of 2D ultrathin ZnIn2S4 nanosheets with well-defined {0001} crystalline facets. The Cu-TCPP@ZnIn2S4 sensor exhibited high sensitivity (1.5 Hz@50 and 2.3 Hz@100 ppb), limit of detection (LOD: 50 ppb), and ultrafast (9 s @500 ppb) detection of triethylamine (TEA), which is the lowest LOD and the fastest sensor among the reported TEA sensors at room temperature, tackling the bottleneck for the ultrafast detection of the resonant-gravimetric sensor. These above results provide an innovative and easily achievable pathway for the synthesis of heterogeneous structure sensing materials.

Emerging single-atom catalysts in the detection and purification of contaminated gases

Single atom catalysts (SACs) show exceptional molecular adsorption and electron transfer capabilities owing to their remarkable atomic efficiency and tunable electronic structure, thereby providing promising solutions for diverse important processes including photocatalysis, electrocatalysis, thermal catalysis, etc. Consequently, SACs hold great potential in the detection and degradation of pollutants present in contaminated gases. Over the past few years, SACs have made remarkable achievements in the field of contaminated gas detection and purification. In this review, we first provide a concise introduction to the significance and urgency of gas detection and pollutant purification, followed by a comprehensive overview of the structural feature identification methods for SACs. Subsequently, we systematically summarize the three key properties of SACs for detecting contaminated gases and discuss the research progress made in utilizing SACs to purify polluted gases. Finally, we analyze the enhancement mechanism and advantages of SACs in polluted gas detection and purification, and propose strategies to address challenges and expedite the development of SACs in polluted gas detection and purification.

Oxygen vacancies induced by lanthanum-doped indium oxide nanofibers for promoted temperature-dependent triethylamine and formaldehyde sensing

A novel TEA and HCHO dual-function temperature-dependent sensing material (3La-In2O3) with ultra-high sensitivity was developed via a facile electrospinning process. Though rare earth doped in In2O3-based sensors have been widely reported, the low sensitivity, poor selectivity and high operating temperature remain restrict their application. Herein, the In2O3 nanofibers with different contents of La3+ ions are firstly obtained by a facile electrospinning process. The sensing performance investigation confirms that the 3% La/In molar ratio of La3+ doped in In2O3 nanofibers are more appropriate as the sensing material for TEA and HCHO detection. The 3La-In2O3 exhibits greatest response value of 3721.60-10 ppm TEA and 1469.65-10 ppm HCHO at their best working temperature (100 ℃ and 160 ℃), approximately 23.85-fold and 10.85-fold higher than that of pristine In2O3 nanofibers. In addition, the excellent selectivity, repeatability, and long-term stability ensure the further application of the 3La-In2O3-based sensor in actual environment. The promoted sensing performance is mainly ascribed to the more oxygen vacancies, the increasing specific surface area, the smaller grain size of In2O3 nanofibers induced by La3+ doping. The DFT results demonstrate the beneficial effect of La and oxygen vacancies on the improved target gas adsorption energy.

Enhanced NO2 Sensitivity of Vertically Stacked van der Waals Heterostructure Gas Sensor and Its Remarkable Electric and Mechanical Tunability

Nanodevices based on van der Waals heterostructures have been predicted, and shown, to have unprecedented operational principles and functionalities that hold promise for highly sensitive and selective gas sensors with rapid response times and minimal power consumption. In this study, we fabricated gas sensors based on vertical MoS2/WS2 van der Waals heterostructures and investigated their gas sensing capabilities. Compared with individual MoS2 or WS2 gas sensors, the MoS2/WS2 van der Waals heterostructure gas sensors are shown to have enhanced sensitivity, faster response times, rapid recovery, and a notable selectivity, especially toward NO2. In combination with a theoretical model, we show that it is important to take into account created trapped states (flat bands) induced by the adsorption of gas molecules, which capture charges and alter the inherent built-in potential of van der Waals heterostructure gas sensors. Additionally, we note that the performance of these MoS2/WS2 heterostructure gas sensors could be further enhanced using electrical gating and mechanical strain. Our findings highlight the importance of understanding the effects of altered built-in potentials arising from gas molecule adsorption induced flat bands, thus offering a way to enhance the gas sensing performance of van der Waals heterostructure gas sensors.

Future prospects of MXenes: synthesis, functionalization, properties, and application in field effect transistors

MXenes are a family of two-dimensional (2D) materials that have drawn a lot of interest recently because of their distinctive characteristics and possible uses in a variety of industries. This review emphasizes the bright future prospects of MXene materials in the realm of FETs. Their remarkable properties, coupled with their tunability and compatibility, position MXenes as promising candidates for the development of high-performance electronic devices. As research in this field continues to evolve, the potential of MXenes to drive innovation in electronics becomes increasingly evident, fostering excitement for their role in shaping the future of electronic technology. This paper presents a comprehensive overview of MXene materials, focusing on their synthesis methods, functionalization strategies, intrinsic properties, and their promising application in Field Effect Transistors (FETs).

Emerging Xene-Based Single-Atom Catalysts: Theory, Synthesis, and Catalytic Applications

In recent years, the emergence of novel 2D monoelemental materials (Xenes), e.g., graphdiyne, borophene, phosphorene, antimonene, bismuthene, and stanene, has exhibited unprecedented potentials for their versatile applications as well as addressing new discoveries in fundamental science. Owing to their unique physicochemical, optical, and electronic properties, emerging Xenes have been regarded as promising candidates in the community of single-atom catalysts (SACs) as single-atom active sites or support matrixes for significant improvement in intrinsic activity and selectivity. In order to comprehensively understand the relationships between the structure and property of Xene-based SACs, this review represents a comprehensive summary from theoretical predictions to experimental investigations. Firstly, theoretical calculations regarding both the anchoring of Xene-based single-atom active sites on versatile support matrixes and doping/substituting heteroatoms at Xene-based support matrixes are briefly summarized. Secondly, controlled synthesis and precise characterization are presented for Xene-based SACs. Finally, current challenges and future opportunities for the development of Xene-based SACs are highlighted.

Density functional theory studies of Ti3C2TxMXene nanosheets decorated with Au for sensing SF6/N2nitrogen-containing decomposition gases

SF6/N2mixture is an alternative gas of SF6, which is already used in electrical equipment. When a malfunction occurs , SF6/N2will decompose and further react with trace water and oxygen to produce nitrogen-containing gases such as NO, NO2, N2O and NF3. It is necessary to monitor these gases to ensure the safe operation of the equipment. This paper is based on density functional theory (DFT), the nanomaterial Ti3C2Txdoped with Au atom was selected as sensing material. The result shows that Au/Ti3C2Txhas larger adsorption energy when NO and NO2adsorbed on the surface, the stable structures were conformed more easily with NO and NO2compared with N2O and NF3. The density of states analysis and the frontier molecule orbital analysis reveal more change of the system before and after NO and NO2adsorption, suggesting the material showed good sensitivity performance to NO and NO2. Thus, Au/Ti3C2Txis considered to have the potential for sensing NO and NO2.

Efficient exploration of transition-metal decorated MXene for carbon monoxide sensing using integrated active learning and density functional theory

The urgent demand for chemical safety necessitates the real-time detection of carbon monoxide (CO), a highly toxic gas. MXene, a 2D material, has shown potential for gas sensing applications (e.g., NH3, NO, SO2, CO2) due to its high surface accessibility, electrical conductivity, stability, and flexibility in surface functionalization. However, the pristine MXene generally exhibits poor interaction with CO; still, transition metal decoration can strengthen the interaction between CO and MXene. This study presents a high-throughput screening of 450 combinations of transition-metal (TM) decorated MXene (TM@MXene) for CO sensing applications using an integrated active learning (AL) and density functional theory (DFT) screening pipeline. Our AL pipeline, adopting a crystal graph convolutional neural network (CGCNN) as a surrogate model, successfully accelerates the screening of CO sensor candidates with minimal computational resources. This study identifies Sc@Zr3C2O2 and Y@Zr3C2O2 as the optimal TM@MXene candidates with promising CO sensing performance regarding the screening criteria of recovery time, surface stability, charge transfer, and sensitivity to CO. The proposed AL framework can be extended for property finetuning in the combinatorial chemical space.

Room-temperature chemiresistive ammonia sensors based on 2D MXenes and their hybrids: recent developments and future prospects

Detection of ammonia (NH3) gas at room temperature is essential in a variety of sectors, including pollution monitoring, commercial safety and medical services, etc. Two-dimensional (2D) materials have emerged as fascinating candidates for gas-sensing applications due to their distinct properties. MXenes, a type of 2D transition metal carbides/nitrides/carbonotrides, have drawn the interest of researchers due to their high conductivity, large surface area, and changing surface chemistry. The review begins by describing the NH3 gas-detecting methods of 2D materials and then concentrates on MXene-based sensors, emphasising the benefits that MXenes provide in this context. The study also explains the prime factors involved in evaluating sensor performance, which include sensor response, sensitivity, selectivity, stability, charge transfer values, adsorption energy and response/recovery times. Subsequently, the review covers two main categories: pristine/intercalated MXenes and MXene-based hybrid materials. The review investigates the approaches for improving the sensing characteristics of pristine and intercalated MXenes by introducing MXene hybrids like MXene-metal oxide hybrids, MXene-transition metal dichalcogenides hybrid, MXene-other 2D materials hybrid, MXene-polymers and other hybrids and other MXene-derived materials. In summary, this review offers a thorough overview of current advancements and potential applications for room-temperature ammonia sensors based on 2D MXenes and their hybrids. In order to pave the way for future improvements in MXene-based gas-sensing technology for room temperature ammonia detection, the study concludes by outlining potential future scope and conclusions.

2D Materials Beyond Post-AI Era: Smart Fibers, Soft Robotics, and Single Atom Catalysts

Recent consecutive discoveries of various 2D materials have triggered significant scientific and technological interests owing to their exceptional material properties, originally stemming from 2D confined geometry. Ever-expanding library of 2D materials can provide ideal solutions to critical challenges facing in current technological trend of the fourth industrial revolution. Moreover, chemical modification of 2D materials to customize their physical/chemical properties can satisfy the broad spectrum of different specific requirements across diverse application areas. This review focuses on three particular emerging application areas of 2D materials: smart fibers, soft robotics, and single atom catalysts (SACs), which hold immense potentials for academic and technological advancements in the post-artificial intelligence (AI) era. Smart fibers showcase unconventional functionalities including healthcare/environmental monitoring, energy storage/harvesting, and antipathogenic protection in the forms of wearable fibers and textiles. Soft robotics aligns with future trend to overcome longstanding limitations of hard-material based mechanics by introducing soft actuators and sensors. SACs are widely useful in energy storage/conversion and environmental management, principally contributing to low carbon footprint for sustainable post-AI era. Significance and unique values of 2D materials in these emerging applications are highlighted, where the research group has devoted research efforts for more than a decade.

Understanding the selection of catalytic pathway on graphene-supported nitrogen coordinated Ru-atom by ab initio molecular dynamics simulation

CONTEXT

In the paper, the ORR/OER on graphene-supported nitrogen coordinated Ru-atom (Ru-N-C) is simulated. We discuss nitrogen coordination influences electronic properties, adsorption energies, and catalytic activity in a single-atom Ru active site. The over potentials on Ru-N-C are 1.12 eV/1.00 eV for ORR/OER. We calculate Gibbs-free energy (ΔG) for every reaction step in ORR/OER process. In order to gain a deeper understanding of the catalytic process on the surface of single atom catalysts, the ab initio molecular dynamics (AIMD) simulations show that Ru-N-C has a structural stability at 300 K and that ORR/OER on Ru-N-C can occur along a typical four-electron process of reaction. AIMD simulations of catalytic processes provide detailed information about atom interactions.

METHODS

In this paper, we use density functional theory (DFT) with PBE functional to study the electronic properties and adsorption properties of graphene-supported nitrogen coordinated Ru-atom (Ru-N-C) Gibbs-free energy and Gibbs-free energy for very reaction step. The structural optimization and all the calculations are carried out by Dmol3 package, adopting the PNT basis set and DFT semicore pseudopotential. Ab initio molecular dynamics simulations (AIMD) were run for 10 ps. The canonical (NVT) ensemble, massive GGM thermostat, and a temperature of 300 K are taken into account. The functional of B3LYP and the DNP basis set are chosen for AIMD.

All-MXene-Printed RF Resonators as Wireless Plant Wearable Sensors for In Situ Ethylene Detection

Printed flexible electronics have emerged as versatile functional components of wearable intelligent devices that bridge the digital information networks with biointerfaces. Recent endeavors in plant wearable sensors provide real-time and in situ insights to study phenotyping traits of crops, whereas monitoring of ethylene, the fundamental phytohormone, remains challenging due to the lack of flexible and scalable manufacturing of plant wearable ethylene sensors. Here the all-MXene-printed flexible radio frequency (RF) resonators are presented as plant wearable sensors for wireless ethylene detection. The facile formation of additive-free MXene ink enables rapid, scalable manufacturing of printed electronics, demonstrating decent printing resolution (2.5% variation), ≈30000 S m^-1 conductivity and mechanical robustness. Incorporation of MXene-reduced palladium nanoparticles (MXene@PdNPs) facilitates 1.16% ethylene response at 1 ppm with 0.084 ppm limit of detection. The wireless sensor tags are attached on plant organ surfaces for in situ and continuously profiling of plant ethylene emission to inform the key transition of plant biochemistry, potentially extending the application of printed MXene electronics to enable real-time plant hormone monitoring for precision agriculture and food industrial management.

Field Effect Transistor Gas Sensors Based on Mechanically Exfoliated Van der Waals Materials

The high surface-to-volume ratio and flatness of mechanically exfoliated van der Waals (vdW) layered materials make them an ideal platform to investigate the Langmuir absorption model. In this work, we fabricated field effect transistor gas sensors, based on a variety of mechanically exfoliated vdW materials, and investigated their electrical field-dependent gas sensing properties. The good agreement between the experimentally extracted intrinsic parameters, such as equilibrium constant and adsorption energy, and theoretically predicted values suggests validity of the Langmuir absorption model for vdW materials. Moreover, we show that the device sensing behavior depends crucially on the availability of carriers, and giant sensitivities and strong selectivity can be achieved at the sensitivity singularity. Finally, we demonstrate that such features provide a fingerprint for different gases to quickly detect and differentiate between low concentrations of mixed hazardous gases using sensor arrays.

Toward Smart Sensing by MXene

The Internet of Things era has promoted enormous research on sensors, communications, data fusion, and actuators. Among them, sensors are a prerequisite for acquiring the environmental information for delivering to an artificial data center to make decisions. The MXene-based sensors have aroused tremendous interest because of their extraordinary performances. In this review, the electrical, electronic, and optical properties of MXenes are first introduced. Next, the MXene-based sensors are discussed according to the sensing mechanisms such as electronic, electrochemical, and optical methods. Initially, biosensors are introduced based on chemiresistors and field-effect transistors. Besides, the wearable pressure sensor is demonstrated with piezoresistive devices. Third, the electrochemical methods include amperometry and electrochemiluminescence as examples. In addition, the optical approaches refer to surface plasmonic resonance and fluorescence resonance energy transfer. Moreover, the prospects are delivered of multimodal data fusion toward complicated human-like senses. Eventually, future opportunities for MXene research are conveyed in the new material discovery, structure design, and proof-of-concept devices.

Advanced growth of 2D MXene for electrochemical sensors

Over the last few years, electroanalysis has made significant advancements, particularly in developing electrochemical sensors. Electrochemical sensors generally include emerging Photoelectrochemical and Electrochemiluminescence sensors, which combine optical techniques and traditional electrochemical bio/non-biosensors. Numerous EC-detecting methods have also been designed for commercial applications to detect biological and non-biological markers for various diseases. Analytical applications have recently focused significantly on one of the novel nanomaterials, the MXene. This material is being extensively investigated for applications in electrochemical sensors due to its unique mechanical, electronic, optical, active functional groups and thermal characteristics. This study extensively discusses the salient features of MXene-based electrochemical sensors, photoelectrochemical sensors, enzyme-based biosensors, immunosensors, aptasensors, electrochemiluminescence sensors, and electrochemical non-biosensors. In addition, their performance in detecting various substances and contaminants is thoroughly discussed. Furthermore, the challenges and prospects the MXene-based electrochemical sensors are elaborated.

Application of Titanium Carbide MXenes in Chemiresistive Gas Sensors

The titanium carbide MXenes currently attract an extreme amount of interest from the material science community due to their promising functional properties arising from the two-dimensionality of these layered structures. In particular, the interaction between MXene and gaseous molecules, even at the physisorption level, yields a substantial shift in electrical parameters, which makes it possible to design gas sensors working at RT as a prerequisite to low-powered detection units. Herein, we consider to review such sensors, primarily based on Ti3C2Tx and Ti2CTx crystals as the most studied ones to date, delivering a chemiresistive type of signal. We analyze the ways reported in the literature to modify these 2D nanomaterials for (i) detecting various analyte gases, (ii) improving stability and sensitivity, (iii) reducing response/recovery times, and (iv) advancing a sensitivity to atmospheric humidity. The most powerful approach based on designing hetero-layers of MXenes with other crystals is discussed with regard to employing semiconductor metal oxides and chalcogenides, noble metal nanoparticles, carbon materials (graphene and nanotubes), and polymeric components. The current concepts on the detection mechanisms of MXenes and their hetero-composites are considered, and the background reasons for improving gas-sensing functionality in the hetero-composite when compared with pristine MXenes are classified. We formulate state-of-the-art advances and challenges in the field while proposing some possible solutions, in particular via employing a multisensor array paradigm.

Progress and Perspectives of Single-Atom Catalysts for Gas Sensing

Single-atom catalysts (SACs) attract extensive attention in the field of heterogeneous catalysis in recent years due to the maximum atom utilization and unique physical and chemical properties. The gas sensing is actually a heterogeneous catalysis process but the SACs are new to this area. Although SACs show huge potential in gas sensing, the SACs gas sensing area currently is still at the infancy stage. This work critically reviews the recent advances and current status of single-atom gas sensing materials. General synthesis routes, characterization methods, and sensing performance indexes are introduced. At the end, the challenges and future prospects on SACs gas sensing are presented from the authors' perspectives. This work is anticipated to provide insights and guideline for the chemical sensing community.

Research status of gas sensing performance of Ti3C2Tx-based gas sensors: A mini review

Developing efficient gas sensing materials capable of sensitive, fast, stable, and selective detection is a requisite in the field of indoor gas environment monitoring. In recent years, metal carbides/nitrides (MXenes) have attracted attention in the field of gas sensing because of their high specific surface area, good electrical conductivity, and high hydrophilicity. Ti₃C₂Tx, the first synthesised MXene material, has also become the most popular MXene material owing to its low formation energy. In this paper, the latest progress in the application of Ti₃C₂Tx-based nanomaterials in the field of gas sensors is reviewed. Some challenges currently faced by Ti₃C₂Tx gas sensors are discussed, and possible solutions are proposed, focusing on the use of composite materials and surface functionalization methods to modify Ti₃C₂Tx nanomaterials to improve their sensing performance for the detection of gaseous volatile organic compounds. This study highlights the application prospects of Ti₃C₂Tx nanomaterials in gas sensors.