Paper-Based Microfluidic Device (DON-Chip) for Rapid and Low-Cost Deoxynivalenol Quantification in Food, Feed, and Feed Ingredients

Pre-ligand-induced porous MOF as a peroxidase mimic for electrochemical analysis of deoxynivalenol (DON)

Developing convenient and sensitive vomitoxin detection methods is crucial to prevent human health risks from excess deoxynivalenol (DON) in food products. This study synthesized porous electrochemical nanomaterial calcined PA-NH2-MIL-101 (CPNM) with abundant amino group modifications using a palmitic acid (PA) pre-ligand and amino functionalization scheme. PA-induced defect generation and which formed a high-stability porous structure that increased the peroxidase-like catalytic active site and thus improving electrochemical analytical performance. In addition, introducing amino groups in CPNM facilitated the covalent immobilization of DON antibodies. Therefore, an electrochemical immunosensing platform for detecting DON was developed by utilizing the electrocatalytic signals generated by Fe-MOF (MIL-101) nanozymes and thionine molecules. The proposed sensor showed a large linear range of 10-107 pg mL-1 with a detection limit of 9.6 pg mL-1 (S/N = 3) under optimized optimal conditions. Consequently, this innovative electrochemical immunosensing technique based on CPNM nanozymes paves the way for DON detection in food.

MOF-engineered Cu2O nanozymes with boosted peroxidase-like activity for colorimetric-fluorescent dual-mode detection of deoxynivalenol

The development of a high sensitivity biosensor for the detection of highly toxic deoxynivalenol (DON) is vital for human health and food security. In this work, by integrating metal-organic frameworks (MOF) with cubic Cu2O nanoparticles (Cu2O@MOF), the nanocomposite achieved a 4.8-fold increase in specific surface area compared to pristine Cu2O, which synergistically enhanced its peroxidase-like (POD) activity through optimized substrate affinity and accelerated charge transfer. Consequently, based on the marriage properties of POD activity and fluorescence signal from Cu2O@MOF nanoparticles and carbon dots (CDs), a colorimentric-fluorescent dual-mode biosensor was constructed for DON detection. Concurrently, the competitive binding of DON with immobilized antigens on Cu2O@MOF-CDs results in antibody displacement, leading to progressive reduction of captured probes with increasing DON concentrations, thereby inducing proportional attenuation in both colorimetric and fluorescence signal intensities. Under the optimum conditions, the established biosensor achieved a detection limit of 0.0018 ng/mL for DON. Furthermore, the prepared dual-mode biosensor was successfully applied to detect DON in tap water, wheat and corn, demonstrating its practical utility for real-world applications. Overall, this work not only advances nanozyme design through MOF-mediated interface engineering but also provides a rapid, accurate, and field-deployable strategy for monitoring mycotoxins in complex matrices.

Advances in Aptamer-Based Biosensors for the Detection of Foodborne Mycotoxins

Foodborne mycotoxins (FBMTs) are toxins produced by food itself or during processing and transportation that pose an enormous threat to public health security. However, traditional instrumental and chemical methods for detecting toxins have shortcomings, such as high operational difficulty, time consumption, and high cost, that limit their large-scale applications. In recent years, aptamer-based biosensors have become a new tool for food safety risk assessment and monitoring due to their high affinity, good specificity, and fast response. In this review, we focus on the progress of single-mode and dual-mode aptasensors in basic research and device applications over recent years. Furthermore, we also point out some problems in the current detection strategies, with the aim of stimulating future toxin detection systems for a transition toward ease of operation and rapid detection.

Aptamer-modified paper-based analytical devices for the detection of food hazards: Emerging applications and future perspective

Food analysis plays a critical role in assessing human health risks and monitoring food quality and safety. Currently, there is a pressing need for a reliable, portable, and quick recognition element for point-of-care testing (POCT) to better serve the demands of on-site food analysis. Aptamer-modified paper-based analytical devices (Apt-PADs) have excellent characteristics of high portability, high sensitivity, high specificity, and on-site detection, which have been widely used and concerned in the field of food safety. The article reviews the basic components and working principles of Apt-PADs, and introduces their representative applications detecting food hazards. Finally, the advantages, challenges, and future directions of Apt-PADs-based sensing performance are discussed, to provide new directions and insights for researchers to select appropriate Apt-PADs according to specific applications.

Enzyme Cascade Amplification-Based Immunoassay Using Alkaline Phosphatase-Linked Single-Chain Variable Fragment Fusion Tracer and MnO2 Nanosheets for Detection of Deoxynivalenol in Corn Samples

Deoxynivalenol (DON) is a common mycotoxin that contaminates cereals. Therefore, the development of sensitive and efficient detection methods for DON is essential to guarantee food safety and human health. In this study, an enzyme cascade amplification-based immunoassay (ECAIA) using a dual-functional alkaline phosphatase-linked single-chain fragment variable fusion tracer (scFv-ALP) and MnO2 nanosheets was established for DON detection. The scFv-ALP effectively catalyzes the hydrolysis of ascorbyl-2-phosphate (AAP) to produce ascorbic acid (AA). This AA subsequently interacts with MnO2 nanosheets to initiate a redox reaction that results in the loss of oxidizing properties of MnO2. In the absence of ALP, MnO2 nanosheets can oxidize 3,3',5,5'-tetramethylbenzidine (TMB) to produce the blue oxidized product of TMB, which exhibits a signal at a wavelength of 650 nm for quantitative analysis. After optimization, the ECAIA had a limit of detection of 0.45 ng/mL and a linear range of 1.2-35.41 ng/mL. The ECAIA exhibited good accuracy in recovery experiments and high selectivity for DON. Moreover, the detection results of the actual corn samples correlated well with those from high-performance liquid chromatography. Overall, the proposed ECAIA based on the scFv-ALP and MnO2 nanosheets was demonstrated as a reliable tool for the detection of DON in corn samples.

Ensuring food safety: Microfluidic-based approaches for the detection of food contaminants

Detecting foodborne contamination is a critical challenge in ensuring food safety and preventing human suffering and economic losses. Contaminated food, comprising biological agents (e.g. bacteria, viruses and fungi) and chemicals (e.g. toxins, allergens, antibiotics and heavy metals), poses significant risks to public health. Microfluidic technology has emerged as a transformative solution, revolutionizing the detection of contaminants with precise and efficient methodologies. By manipulating minute volumes of fluid on miniaturized systems, microfluidics enables the creation of portable chips for biosensing applications. Advancements from early glass and silicon devices to modern polymers and cellulose-based chips have significantly enhanced microfluidic technology, offering adaptability, flexibility, cost-effectiveness and biocompatibility. Microfluidic systems integrate seamlessly with various biosensing reactions, facilitating nucleic acid amplification, target analyte recognition and accurate signal readouts. As research progresses, microfluidic technology is poised to play a pivotal role in addressing evolving challenges in the detection of foodborne contaminants. In this short review, we delve into various manufacturing materials for state-of-the-art microfluidic devices, including inorganics, elastomers, thermoplastics and paper. Additionally, we examine several applications where microfluidic technology offers unique advantages in the detection of food contaminants, including bacteria, viruses, fungi, allergens and more. This review underscores the significant advancement of microfluidic technology and its pivotal role in advancing the detection and mitigation of foodborne contaminants.

Research progress of microfluidics-based food safety detection

High demands for food safety detection and analysis have been advocated with people's increasing living standards. Even though numerous analytical testing techniques have been proposed, their widespread adoption is still constrained by the high limit of detection, narrow detection ranges, and high implementation costs. Due to their advantages, such as reduced sample and reagent consumption, high sensitivity, automation, low cost, and portability, using microfluidic devices for food safety monitoring has generated significant interest. This review provides a comprehensive overview of the latest microfluidic detection platforms (published in recent 4 years) and their applications in food safety, aiming to provide references for developing efficient research strategies for food contaminant detection and facilitating the transition of these platforms from laboratory research to practical field use.

Microfluidic paper analytic device (μPAD) technology for food safety applications

Foodborne pathogens, food adulterants, allergens, and toxic chemicals in food can cause major health hazards to humans and animals. Stringent quality control measures at all stages of food processing are required to ensure food safety. There is, therefore, a global need for affordable, reliable, and rapid tests that can be conducted at different process steps and processing sites, spanning the range from the sourcing of food to the end-product acquired by the consumer. Current laboratory-based food quality control tests are well established, but many are not suitable for rapid on-site investigations and are costly. Microfluidic paper analytical devices (μPADs) are a fast-growing field in medical diagnostics that can fill these gaps. In this review, we describe the latest developments in the applications of microfluidic paper analytic device (μPAD) technology in the food safety sector. State-of-the-art μPAD designs and fabrication methods, microfluidic assay principles, and various types of μPAD devices with food-specific applications are discussed. We have identified the prominent research and development trends and future directions for maximizing the value of microfluidic technology in the food sector and have highlighted key areas for improvement. We conclude that the μPAD technology is promising in food safety applications by using novel materials and improved methods to enhance the sensitivity and specificity of the assays, with low cost.

Recent advances in nucleic acid signal amplification-based aptasensors for sensing mycotoxins

Mycotoxin contamination in food products may cause serious health hazards and economic losses. The effective control and accurate detection of mycotoxins have become a global concern. Even though a variety of methods have been developed for mycotoxin detection, most conventional methods suffer from complicated operation procedures, low sensitivity, high cost, and long assay time. Therefore, the development of simple and sensitive methods for mycotoxin assay is highly needed. The introduction of nucleic acid signal amplification technology (NASAT) into aptasensors significantly improves the sensitivity and facilitates the detection of mycotoxins. Herein, we give a comprehensive review of the recent advances in NASAT-based aptasensors for assaying mycotoxins and summarize the principles, features, and applications of NASAT-based aptasensors. Moreover, we highlight the challenges and prospects in the field, including the simultaneous detection of multiple mycotoxins and the development of portable devices for field detection.

Microfluidic Point-of-Care Diagnostics for Multi-Disease Detection Using Optical Techniques: A Review

The lifestyle of modern society is a major contributing factor for the majority of patients suffering from more than one disease. To Screen and diagnose each of those diseases, there is a great need for portable, and economical diagnostic tools, which are highly stipulated to yield rapid and accurate results using a small volume of the samples such as blood, saliva, sweat, etc. Point-of-care Testing (POCT) is one of the approaches to harvest prompt diagnosis of numerous diseases. The Majority of Point-of-Care Devices (POCD) are developed to diagnose one disease within the specimen. On the other hand, multi-disease detection capabilities in the same point-of-care devices are considered to be an efficient candidate to execute the state-of-the-art platform for multi-disease detection. Most of the literature reviews in this field focus on Point-of-Care (POC) devices, their underlying principles of operation, and their potential applications. It is evident from a perusal of the scholarly works that no review articles have been written on multi-disease detection POC devices. A review study analyzing the current level and functionality of multi-disease detection POC devices would be of great use to future researchers and device manufacturers. This review paper is addressing the above gap by focusing on various optical techniques like fluorescence, Absorbance, and Surface Plasmon Resonance (SPR) for multi-disease detection by harnessing the microfluidic-based POC device.

Overview-gold nanoparticles-based sensitive nanosensors in mycotoxins detection

Food-borne mycotoxins is one of the food safety concerns in the world. At present, nanosensors are widely used in the detection and analysis of mycotoxins due to their high specificity and sensitivity. In nanosensor-based mycotoxindetections, the sensitivity is mainly improved from two aspects. On the one hand, based on the principle of immune response, antigens and antibodies can be modified and developed. Such as single-domain heavy chain antibodies, aptamers, peptides, and antigen mimotopes. On the other hand, improvements and innovations have been made on signal amplification materials, including gold nanoparticles (AuNPs), quantum dots, and graphene, etc. Among them, gold nanoparticles can not only be used as a signal amplification material, but also can be used as carriers for identification elements, which can be used for signal amplification in detection. In this article, we systematically summarized the emerging strategies for enhancing the detection sensitivity of traditional gold nanoparticles-based nanosensors, in terms of recognition elements and signal amplification. Representative examples were selected to illustrate the potential mechanism of each strategy in enhancing the colorimetric signal intensity of AuNP and its potential application in biosensing. Finally, our review suggested the challenges and future prospects of gold particles in detection of mycotoxins.

Zeolitic Imidazolate Framework-8 Composite-Based Enzyme-Linked Aptamer Assay for the Sensitive Detection of Deoxynivalenol

The mycotoxin deoxynivalenol (DON) is a prevalent contaminant in cereals that threatens the health of both humans and animals and causes economic losses due to crop contamination. The rapid and sensitive detection of DON is essential for food safety. Herein, a colorimetric biosensor based on horseradish peroxidase- and gold nanoparticle-encapsulated zeolitic imidazolate framework-8 (HRP&Au@ZIF-8) was developed for the sensitive screening of DON. The synthesized HRP&Au@ZIF-8 probes not only held great potential for signal amplification but also exhibited stable catalytic activity even under extreme conditions, which endowed the biosensor with both good sensitivity and stability. Under the optimized conditions, qualitative measurement of DON can be achieved through visual inspection, and quantitative evaluation can be performed via absorbance measurements at a characteristic wavelength of 450 nm. The proposed method has demonstrated high sensitivity with a linear detection range of 1-200 ng/mL and a detection limit of 0.5068 ng/mL. It also presented good selectivity and reliability. Furthermore, DON in spiked cereal samples has been quantified successfully using this method. This novel approach demonstrates significant potential for the facile and expeditious detection of DON in cereal products and brings us one step closer to enhancing food safety.

Recent advances of ratiometric sensors in food matrices: mycotoxins detection

The public health problem caused by mycotoxins contamination has received a great deal of attention worldwide. Mycotoxins produced by filamentous fungi widely distributed in foodstuffs can cause adverse impacts on humans and livestock, posing serious health threats. Particularly worth mentioning is that mycotoxins can accumulate in organisms and be enriched through the food chain. Improving early trace detection and control from the source is a more desirable approach than the contaminated food disposal process to ensure food safety. Conventional sensors are susceptible to interference from various components in intricate food matrices when detecting trace mycotoxins. The application of ratiometric sensors avoids signal fluctuations, and reduce background influences, which casts new light on developing sensors with superior performance. This work is the first to provide an overview of the recent progress of ratiometric sensors in the detection of mycotoxins in intricate food matrices, and highlight the output types of ratiometric signal with respect to accurate quantitative analysis. The prospects of this field are also included in this paper and are intended to have key ramifications on the development of sensing detection conducive to food safety.

Multicolor Visual Detection of Deoxynivalenol in Grain Based on Magnetic Immunoassay and Enzymatic Etching of Plasmonic Gold Nanobipyramids

In this study, a multicolor visual method based on a magnetic immunoassay and enzyme-induced gold nanobipyramids (Au NBPs) etching was developed for deoxynivalenol (DON) detection. The magnetic beads modified with high affinity DON monoclonal antibodies were used as a carrier for target enrichment and signal transformation and the Au NBPs with excellent plasmonic optical properties were served as enzymatic etching substrates. The oxidation state TMB, which was generated through catalysis of horseradish peroxidase (HRP), induced the etching of plasmonic Au NBPs, resulting in the longitudinal peak blue-shift of local surface plasmon resonance (LSPR). Correspondingly, Au NBPs with various aspect ratios displayed a variety of individual colors which were visualized by the naked eye. The LSPR peak shift was linearly related to the DON concentration in the range of 0~2000 ng/mL and the detection limit was 57.93 ng/mL. The recovery for naturally contaminated wheat and maize at different concentrations ranged from 93.7% to 105.7% with a good relative standard deviation below 11.8%. Through observing the color change in Au NBPs, samples with overproof DON could be screened preliminarily by the naked eye. The proposed method has the potential to be applied in on-site rapid screening of mycotoxins in grain. In addition, the current multicolor visual method only used for the simultaneous detection of multiple mycotoxins is in urgent need of a breakthrough to overcome the limitation of single mycotoxin detection.

A portable paper-based aptasensor for simultaneous visual detection of two mycotoxins in corn flour using dual-color upconversion nanoparticles and Cu-TCPP nanosheets

A portable paper-based microfluidic aptasensor is established to simultaneously and visually detect zearalenone (ZEN) and ochratoxin A (OTA). The targets at the sample zone can migrate to two detection zones through dual-channels and result in green and blue fluorescence recovery. This is due to the specific recognition by a respective aptamer that destroys fluorescence resonance energy transfer (FRET) from dual-color upconversion nanoparticles (UCNPs) to Cu-TCPP nanosheets. By capturing fluorescent images and analyzing the corresponding RGB value via a smartphone, ZEN and OTA can be analyzed with limits of detection down to 0.44 ng/mL and 0.098 ng/mL in the linear ranges of 0.5-100 ng/mL and 0.1-50 ng/mL, respectively. Satisfactory recoveries are also obtained for ZEN (94.5-103.7 %) and OTA (92.2-106.8 %) in corn flour. With the advantages of simple operation, low sample consumption, and broad adaptability, this promising platform allows for the on-site detection of multiple hazards in food.

Advances in immunoassay-based strategies for mycotoxin detection in food: From single-mode immunosensors to dual-mode immunosensors

Mycotoxin contamination in foods and other goods has become a broad issue owing to serious toxicity, tremendous threat to public safety, and terrible loss of resources. Herein, it is necessary to develop simple, sensitive, inexpensive, and rapid platforms for the detection of mycotoxins. Currently, the limitation of instrumental and chemical methods cannot be massively applied in practice. Immunoassays are considered one of the best candidates for toxin detection due to their simplicity, rapidness, and cost-effectiveness. Especially, the field of dual-mode immunosensors and corresponding assays is rapidly developing as an advanced and intersected technology. So, this review summarized the types and detection principles of single-mode immunosensors including optical and electrical immunosensors in recent years, then focused on developing dual-mode immunosensors including integrated immunosensors and combined immunosensors to detect mycotoxins, as well as the combination of dual-mode immunosensors with a portable device for point-of-care test. The remaining challenges were discussed with the aim of stimulating future development of dual-mode immunosensors to accelerate the transformation of scientific laboratory technologies into easy-to-operate and rapid detection platforms.

Electric yo-yo centrifugation combining with paper-based microfluidic immunoassay chip for inflammatory biomarkers detection in whole blood

At present, most countries or regions use commercial centrifuges for centrifugation, but this is out of reaching for limited-resource areas. To overcome this problem, a portable electric yo-yo as centrifuge was firstly proposed to obtain serum, and this device can be combined with paper-based analytical devices for enzyme-linked immunosorbent assay (ELISA) analysis from human whole blood. In this study, inflammatory biomarkers C-reactive protein (CRP) and serum amyloid A (SAA) were used as target biomarker to verify the performance of the proposed method. The results shows good performance and their detection limits were determined to be 580 pg/mL for CRP and 800 pg/mL for SAA, respectively. We believe this method provides a new platform of low cost and fast detection for inflammatory biomarkers in the limited-resource settings.

Simultaneous Cross-type Detection of Water Quality Indexes via a Smartphone-App Integrated Microfluidic Paper-Based Platform

Water quality guarantee in remote areas necessitates the development of portable, sensitive, fast, cost-effective, and easy-to-use water quality detection methods. The current work reports on a microfluidic paper-based analytical device (μPAD) integrated with a smartphone app for the simultaneous detection of cross-type water quality parameters including pH, Cu(II), Ni(II), Fe(III), and nitrite. The shapes, baking time, amount, and ratios of reaction reagent mixtures of wax μPAD were optimized to improve the color uniformity and intensity effectively. An easy-to-use smartphone app was established for recording, analyzing, and directly reading the colorimetric signals and target concentrations on μPAD. The results showed that under the optimum conditions, the current analytical platform has reached the detection limits of 0.4, 1.9, 2.9, and 1.1 ppm for nitrite, Cu(II), Ni(II), and Fe(III), respectively, and the liner ranges are 2.3-90 ppm (nitrite), 3.8-400 ppm (Cu(II)), 2.9-1000 ppm (Ni(II)), 2.8-500 ppm (Fe(III)), and 5-9 (pH). The proposed portable smartphone-app integrated μPAD detection system was successfully applied to real industrial wastewater and river water quality monitoring. The proposed method has great potential for field water quality detection.

Recent advances in simultaneous detection strategies for multi-mycotoxins in foods

Mycotoxin contamination has become a challenge in the field of food safety testing, given the increasing emphasis on food safety in recent years. Mycotoxins are widely distributed, in heavily polluted areas. Food contamination with these toxins is difficult to prevent and control. Mycotoxins, as are small-molecule toxic metabolites produced by several species belonging to the genera Aspergillus, Fusarium, and Penicillium growing in food. They are considered teratogenic, carcinogenic, and mutagenic to humans and animals. Food systems are often simultaneously contaminated with multiple mycotoxins. Due to the additive or synergistic toxicological effects caused by the co-existence of multiple mycotoxins, their individual detection requires reliable, accurate, and high-throughput techniques. Currently available, methods for the detection of multiple mycotoxins are mainly based on chromatography, spectroscopy (colorimetry, fluorescence, and surface-enhanced Raman scattering), and electrochemistry. This review provides a comprehensive overview of advances in the multiple detection methods of mycotoxins during the recent 5 years. The principles and features of these techniques are described. The practical applications and challenges associated with assays for multiple detection methods of mycotoxins are summarized. The potential for future development and application is discussed in an effort, to provide standards of references for further research.

A universal, portable, and ultra-sensitive pipet immunoassay platform for deoxynivalenol detection based on dopamine self-polymerization-mediated bioconjugation and signal amplification

Deoxynivalenol (DON) is highly toxic to the environment and human health. It is important to detect DON with ultra-high sensitivity, ease of operation, and low cost. Inspired by the excellent stability and biocompatibility of polydopamine, a universal, portable and ultra-sensitive pipet immunoassay platform was reported for DON detection based on dopamine self-polymerization (polydopamine coating and polydopamine nanoparticles). The polydopamine coating acted as an effective strategy for biomolecule immobilization on the pipet to improve the coating efficiency that significantly reduced the required concentration of biomolecules. Performing the ELISA in pipets saved nearly 67% of the antigen amount and 83% of the antibody amount, which reduced the detection cost and simplified the experimental steps. The dual signal amplification in this pipet immunoassay enabled ultra-high sensitivity. Polydopamine nanoparticles acted as the enrichment carrier of horseradish peroxidase-goat anti-mouse IgG for the first-round signal amplification, followed by the tyramine-mediated loading of streptavidin-HRP for the second-round signal amplification. The dual-enriched HRP catalyzed the color-developing substrate to achieve highly sensitive colorimetric DON detection with a limit of detection of 0.435 ng/mL.

A paper-based microfluidic sensor array combining molecular imprinting technology and carbon quantum dots for the discrimination of nitrophenol isomers

Paper-based microfluidic analytical devices (μPADs) have recently attracted attention as a rapid test kit owing to their low cost and nonrequirement for external driving pump. However, low accuracy and poor anti-interference ability of μPADs under complex detection condition limit their practical applications. Here, we present a facile way to prepare a novel fluorescence sensor-array μPAD for multi-analyte discrimination based on molecular imprinting technology, and its sensing behavior was studied by using three nitrophenol (NP) isomers (2-, 3-, and 4-NP) as the testing models. Carbon quantum dots (CQDs) emitting blue light were grafted on glass-fiber paper, followed by in-situ modification of three types of molecularly imprinted polymers (MIPs) with 2-, 3-, and 4-NP as template. Each sensing unit on the array showed differential yet cross-reactive binding affinity to NP isomers, resulting in distinct fluorescence quenching efficiency. Thus, precise distinguishment of the three NPs was realized with the MIPs/CQDs/paper-based sensor array. Furthermore, the discrimination ability of the platform was evaluated in mixtures of the NP isomers. Practicability of this apparatus was validated by identification of blind samples and 100% accuracy was achieved. The μPAD has proven to be highly sensitive and accurate, which will serve as an ideal analytical tool in the fields of environment monitoring, disease prognosis, food safety and so on.

Microfluidic Paper-Based Analytical Devices for the Determination of Food Contaminants: Developments and Applications

Food safety is an issue that cannot be ignored at any time because of the great impact of food contaminants on people's daily life, social production, and the economy. Because of the extensive demand for high-quality food, it is necessary to develop rapid, reliable, and efficient devices for food contaminant detection. Microfluidic paper-based analytical devices (μPADs) have been applied in a variety of detection fields owing to the advantages of low-cost, ease of handling, and portability. This review systematically discusses the latest progress of μPADs, including the fundamentals of fabrication as well as applications in the detection of chemical and biological hazards in foods, hoping to provide suitable screening strategies for contaminants in foods and accelerating the technology transformation of μPADs from the lab into the field.

Application of Nanomaterials for Coping with Mycotoxin Contamination in Food Safety: From Detection to Control

Mycotoxins, which are toxic secondary metabolites produced by fungi, are harmful to humans. Mycotoxin-induced contamination has drawn attention worldwide. Consequently, the development of reliable and sensitive detection methods and high-efficiency control strategies for mycotoxins is important to safeguard food industry safety and public health. With the rapid development of nanotechnology, many novel nanomaterials that provide tremendous opportunities for greatly improving the detection and control performance of mycotoxins because of their unique properties have emerged. This review comprehensively summarizes recent trends in the application of nanomaterials for detecting mycotoxins (fluorescence, colorimetric, surface-enhanced Raman scattering, electrochemical, and point-of-care testing) and controlling mycotoxins (inhibition of fungal growth, mycotoxin absorption, and degradation). These detection methods possess the advantages of high sensitivity and selectivity, operational simplicity, and rapidity. With research attention on the control of mycotoxins and the gradual excavation of the properties of nanomaterials, nanomaterials are also employed for the inhibition of fungal growth, mycotoxin absorption, and mycotoxin degradation, and impressive controlling effects are obtained. This review is expected to provide the readers insight into this state-of-the-art area and a reference to design nanomaterials-based schemes for the detection and control of mycotoxins.

A signal-enhancement fluorescent aptasensor based on the stable dual cross DNA nanostructure for simultaneous detection of OTA and AFB1

The simultaneous detection of multiple mycotoxins is of great significance for food safety and human health. Herein, a simple, convenient and accurate fluorescent aptasensor was designed based on the dual cross DNA nanostructure for the simultaneous detection of ochratoxin A (OTA) and aflatoxin B₁ (AFB₁), in which the stable dual cross DNA nanostructure provided an assay platform using the fluorescent dye-labeled aptamers as a sensing element. Owing to the higher affinity of aptamers for their target, the aptamer probes were released from the assay platform in the presence of OTA and AFB₁, resulting in an enhanced fluorescence at 570 nm and 670 nm. This "signal-on" fluorescent aptasensor assay system can effectively avoid background signals and minimize false positive. Furthermore, the designed method can realize the simultaneous detection of OTA and AFB₁ during the whole experiment. The limits of detection (LOD) were as low as 0.0058 ng/mL for OTA, ranging from 0.01 to 50 ng/mL and 0.046 ng/mL for AFB₁, ranging from 0.05 to 100 ng/mL. The proposed fluorescent aptasensor exhibits excellent performance in practical application and provides a novel approach for the simultaneous detection of multiple mycotoxins by simply changing the aptamers. A "signal-on" fluorescent aptasensor assay system based on the stable dual cross DNA nanostructure was successfully developed for simultaneous detection of OTA and AFB₁ with lower detection limits in wider linear ranges.

Recent Developments and Applications of Microfluidic Paper-Based Analytical Devices for the Detection of Biological and Chemical Hazards in Foods: A Critical Review

Nowadays, food safety has become a major concern for the sustainability of global public health. Through the production and distribution steps, food can be contaminated by either chemical hazards or pathogens, and the determination of these plays a critical role in the processes of ensuring food safety. Therefore, the development of analytical tools that can provide rapid screening of these hazards is highly necessary. Microfluidic paper-based analytical devices (µPADs) have advanced significantly in recent years as they are rapid and low-cost analytical screening tools for testing contaminated food products. This review focuses on recent developments of µPADs for various applications in the food safety field. A description of the fabrication of selected papers is briefly discussed, and evaluation of the μPADs' performance with regard to their precision and accuracy as well as their limits of detection is critically assessed. The advantages and disadvantages of these devices are highlighted.

Biosensors for Deoxynivalenol and Zearalenone Determination in Feed Quality Control

Mycotoxin contamination of cereals used for feed can cause intoxication, especially in farm animals; therefore, efficient analytical tools for the qualitative and quantitative analysis of toxic fungal metabolites in feed are required. Current trends in food/feed analysis are focusing on the application of biosensor technologies that offer fast and highly selective and sensitive detection with minimal sample treatment and reagents required. The article presents an overview of the recent progress of the development of biosensors for deoxynivalenol and zearalenone determination in cereals and feed. Novel biosensitive materials and highly sensitive detection methods applied for the sensors and the application of these sensors to food/feed products, the limit, and the time of detection are discussed.

Ultrasensitive Microfluidic Paper-Based Electrochemical/Visual Analytical Device via Signal Amplification of Pd@Hollow Zn/Co Core-Shell ZIF67/ZIF8 Nanoparticles for Prostate-Specific Antigen Detection

An effective signal amplification strategy is essential to enhance the analytical performance of microfluidic paper-based analytical devices (μPADs) for tracing biomarkers. Here, a simple but efficient approach with superior electrocatalytic performance of Pd@hollow Zn/Co core-shell ZIF67/ZIF8 nanoparticles for regulating the efficacious signal amplification process was utilized to realize the detection of prostate-specific antigen (PSA). By rationally designing the core-shell structure of ZIF67/ZIF8 with hollow characteristics on the nanoscale and introducing the noble metal element Pd into the cavity, the diffusion limitation and porous confinement reduction of the obtained nanomaterials with uniform morphology and satisfactory chemical stability could be realized, which endowed it with better catalytic performance than solid metal-organic frameworks (MOFs) and ensured effective signal amplification of H₂O₂ reduction for achieving enhanced electrochemical signals. Moreover, with the assistance of signal probes, the remaining H₂O₂ could flow to the color area to catalyze the oxidation of 3,3',5,5'-tetramethylbenzidine to form a colored product by changing the spatial configuration of the μPAD, thus realizing the visual detection of PSA. On the basis of this novel analytical device, dual-mode ultrasensitive detection of PSA could be achieved with a lower limit of detection of 0.78 pg/mL (S/N = 3) and a wider linear range from 5 pg/mL to 50 ng/mL. This work provided the opportunity of introducing the noble metal element Pd into the cavity of the MOF hollow structure to improve its electrocatalytic efficiency and construct a high-performance μPAD for clinical detection of other biomarkers.

A highly-sensitive and selective antibody-like sensor based on molecularly imprinted poly(L-arginine) on COOH-MWCNTs for electrochemical recognition and detection of deoxynivalenol

A new strategy to mimic antibody for electrochemical recognition and detection of deoxynivalenol (DON) using a highly-sensitive and selective antibody-like sensor based on molecularly imprinted poly(l-arginine) (P-Arg-MIP) on carboxylic acid functionalized carbon nanotubes (COOH-MWCNTs) was proposed. l-arginine as functional monomer was screened to prepare imprinted electrode via its electro-polymerization in the presence of DON onto the surface of COOH-MWCNTs electrode coupled with theoretical calculation. Surface morphology, structural characteristics, and electrochemical properties of P-Arg-MIP/COOH-MWCNTs were characterized by SEM, EDS, FTIR, and CV, respectively. P-Arg-MIP/COOH-MWCNTs displayed relatively high conductivity, high effective surface area, antibody-like molecular recognition and affinity, and a good response towards DON in a linear range from 0.1 to 70 μM with LOD of 0.07 μM in wheat flour samples with satisfactory recovery and feasible practicability in comparison with HPLC. This method provides a promising biomimetic sensing platform for the determination of mycotoxins in food and agro-products.

Developments in mycotoxin analysis: an update for 2019-2020

This review summarises developments on the analysis of various matrices for mycotoxins published in the period from mid-2019 to mid-2020. Notable developments in all aspects of mycotoxin analysis, from sampling and quality assurance/quality control of analytical results, to the various detection and quantitation technologies ranging from single mycotoxin biosensors to comprehensive instrumental methods are presented and discussed. Aside from sampling and quality control, discussion of this past year’s developments is organised by detection and quantitation technology and covers chromatography with targeted or non-targeted high resolution mass spectrometry, tandem mass spectrometry, detection other than mass spectrometry, biosensors, as well as assays that use alternatives to antibodies. This critical review aims to briefly present the most important recent developments and trends in mycotoxin determination as well as to address limitations of the presented methodologies.

A Three-Dimensional Microfluidic Device for Monitoring Cancer and Chemotherapy-Associated Platelet Activation

Platelet activation and the risk of thrombosis are increased in cancer patients, especially after chemotherapy. Our previous studies indicated that chemotherapy-induced platelet activation is largely due to endothelial cell damage. Thus, simple in vitro tests, such as aggregometry, are not desirable tests to predict platelet responsiveness to different chemotherapeutic agents because other contributory factors, such as tumor cells, endothelial cells, and the flow rate of platelets, also contribute to the formation of cancer-associated thrombosis. Therefore, developing a platelet detection system, which includes all possible risk parameters, is necessary. In the present study, we described a microengineered microfluidic system that contained a drug concentration generator, cancer cell culture chip, and three-dimensional (3D) circular microvascular model covered with a confluent endothelial layer and perfused with human platelets at a stable flow rate. Doxorubicin was injected through two injection sites. Endothelial cell injury was evaluated by counting, cell cytoskeleton observation, and the level of IACM1 and ET-1 in endothelial cells or a culture medium. Prestained platelets were perfused into the artificial blood vessel, and platelet-endothelial cell adhesion was measured. We found that (i) MCF7 cell-released factors had a cytotoxicity effect on both endothelial cells and platelets. (ii) We confirmed that doxorubicin-induced platelet activation was endothelial cell-dependent. (iii) A lower dosage of doxorubicin (0-2.0 μM) induced platelet activation, while a higher dosage of doxorubicin (2.0-4.0 μM) led to platelet death. Our findings indicated that platelet-endothelial cell adhesion could be used as a diagnostic marker of platelet activation, providing a simple and rapid detective way to predict platelet responsiveness before or during chemotherapy.

Advances in Colorimetric Strategies for Mycotoxins Detection: Toward Rapid Industrial Monitoring

Mycotoxins contamination is a global public health concern. Therefore, highly sensitive and selective techniques are needed for their on-site monitoring. Several approaches are conceivable for mycotoxins analysis, among which colorimetric methods are the most attractive for commercialization purposes thanks to their visual read-out, easy operation, cost-effectiveness, and rapid response. This review covers the latest achievements in the last five years for the development of colorimetric methods specific to mycotoxins analysis, with a particular emphasis on their potential for large-scale applications in food industries. Gathering all types of (bio)receptors, main colorimetric methods are critically discussed, including enzyme-linked assays, lateral flow-assays, microfluidic devices, and homogenous in-solution strategies. This special focus on colorimetry as a versatile transduction method for mycotoxins analysis is comprehensively reviewed for the first time.

Indicator-Free Argentometric Titration for Distance-Based Detection of Chloride Using Microfluidic Paper-Based Analytical Devices

We described an indicator-free argentometric titration strategy using a microfluidic paper-based analytical device. This strategy was based on the formation of insoluble silver salts by reactions occurring between analytes and titrant (Ag+) on a paper channel. After the insoluble silver salts were formed and precipitated on the channel, the paper substrate modified with the surplus titrant on the channel turned reddish-brown by exposure of the devices to a simple and cheap UV light source for 5 min, generating a colored band on the channel. Distance-based detection of chloride was achieved by measuring the length of the colored band with a detection limit of 1.7 mg L-1 Cl-. This method was used to detect chlorides in tap water, with an analytical result (10.1 ± 1.2 mg L-1) agreeing well with that obtained by a classical conventional precipitation titration (9.8 mg L-1), which was based on the measurement of the consumed volume of titrant. This paper-based precipitation titration method is free of skilled personnel and has advantages of low reagent/sample consumption, disposability, portability, and simple operation over the conventional precipitation titration. More importantly, being free of any indicator, this method may be used to detect more species than the conventional precipitation titrations, which are limited by the indicator, for example, CO3 2- and SO4 2-, which could form insoluble silver salts in aqueous liquids. Additionally, comparing with most of those paper-based titrimetry reported previously, this presented precipitation titration is free of any indicator or ion selective electrode to detect the end point of titration.

Rapid and accurate detection of Escherichia coli O157:H7 in beef using microfluidic wax-printed paper-based ELISA

Escherichia coli O157:H7 is a severe foodborne pathogen. Paper-based ELISA can rapidly and accurately detect E.coli O157:H7 in beef. The method has good sensitivity, specificity and repeatability. It is suitable for point-of-care testing and offers new ideas for the detection of other foodborne pathogens.