Crystal structure at 2.0 A resolution of phosphoribosyl anthranilate isomerase from the hyperthermophile Thermotoga maritima: possible determinants of protein stability

Complex Loop Dynamics Underpin Activity, Specificity, and Evolvability in the (βα)8 Barrel Enzymes of Histidine and Tryptophan Biosynthesis

Enzymes are conformationally dynamic, and their dynamical properties play an important role in regulating their specificity and evolvability. In this context, substantial attention has been paid to the role of ligand-gated conformational changes in enzyme catalysis; however, such studies have focused on tremendously proficient enzymes such as triosephosphate isomerase and orotidine 5'-monophosphate decarboxylase, where the rapid (μs timescale) motion of a single loop dominates the transition between catalytically inactive and active conformations. In contrast, the (βα)8-barrels of tryptophan and histidine biosynthesis, such as the specialist isomerase enzymes HisA and TrpF, and the bifunctional isomerase PriA, are decorated by multiple long loops that undergo conformational transitions on the ms (or slower) timescale. Studying the interdependent motions of multiple slow loops, and their role in catalysis, poses a significant computational challenge. This work combines conventional and enhanced molecular dynamics simulations with empirical valence bond simulations to provide rich details of the conformational behavior of the catalytic loops in HisA, PriA, and TrpF, and the role of their plasticity in facilitating bifunctionality in PriA and evolved HisA variants. In addition, we demonstrate that, similar to other enzymes activated by ligand-gated conformational changes, loops 3 and 4 of HisA and PriA act as gripper loops, facilitating the isomerization of the large bulky substrate ProFAR, albeit now on much slower timescales. This hints at convergent evolution on these different (βα)8-barrel scaffolds. Finally, our work reemphasizes the potential of engineering loop dynamics as a tool to artificially manipulate the catalytic repertoire of TIM-barrel proteins.

Principles for enhancing virus capsid capacity and stability from a thermophilic virus capsid structure

The capsids of double-stranded DNA viruses protect the viral genome from the harsh extracellular environment, while maintaining stability against the high internal pressure of packaged DNA. To elucidate how capsids maintain stability in an extreme environment, we use cryoelectron microscopy to determine the capsid structure of thermostable phage P74-26 to 2.8-Å resolution. We find P74-26 capsids exhibit an overall architecture very similar to those of other tailed bacteriophages, allowing us to directly compare structures to derive the structural basis for enhanced stability. Our structure reveals lasso-like interactions that appear to function like catch bonds. This architecture allows the capsid to expand during genome packaging, yet maintain structural stability. The P74-26 capsid has T = 7 geometry despite being twice as large as mesophilic homologs. Capsid capacity is increased with a larger, flatter major capsid protein. Given these results, we predict decreased icosahedral complexity (i.e. T ≤ 7) leads to a more stable capsid assembly.

Viral capsids need to protect the genome against harsh environmental conditions and cope with high internal pressure from the packaged genome. Here, the authors determine the structure of the thermostable phage P74-26 capsid at 2.8-Å resolution and identify features underlying enhanced capsid capacity and structural stability.

Crystal structure of a phosphoribosyl anthranilate isomerase from the hyperthermophilic archaeon Thermococcus kodakaraensis

A phosphoribosyl anthranilate isomerase, TkTrpF, from Thermococcus kodakaraensis was expressed in Escherichia coli and purified to homogeneity. TkTrpF was crystallized and its structure was determined by molecular replacement in two different space groups (C2 and P1) using data to 1.85 and 1.75 Å resolution, respectively. TkTrpF belongs to the class of TIM-barrel proteins. Structural comparison with other phosphoribosyl anthranilate isomerases (TrpFs) showed the highest structural similarity to Pyrococcus furiosus TrpF. Similarly to P. furiosus TrpF, TkTrpF is a monomer in solution, in contrast to other thermophilic enzymes, which exist as functional dimers. Although in space group P1 TkTrpF crystallizes with two molecules in the asymmetric unit, the interface is highly improbable in solution. Potential factors for the thermostability of TkTrpF were attributed to an increase in helical structure, an increased number of charged residues and an increase in the number of salt bridges.

A novel mercuric reductase from the unique deep brine environment of Atlantis II in the Red Sea

A unique combination of physicochemical conditions prevails in the lower convective layer (LCL) of the brine pool at Atlantis II (ATII) Deep in the Red Sea. With a maximum depth of over 2000 m, the pool is characterized by acidic pH (5.3), high temperature (68 °C), salinity (26%), low light levels, anoxia, and high concentrations of heavy metals. We have established a metagenomic dataset derived from the microbial community in the LCL, and here we describe a gene for a novel mercuric reductase, a key component of the bacterial detoxification system for mercuric and organomercurial species. The metagenome-derived gene and an ortholog from an uncultured soil bacterium were synthesized and expressed in Escherichia coli. The properties of their products show that, in contrast to the soil enzyme, the ATII-LCL mercuric reductase is functional in high salt, stable at high temperatures, resistant to high concentrations of Hg(2+), and efficiently detoxifies Hg(2+) in vivo. Interestingly, despite the marked functional differences between the orthologs, their amino acid sequences differ by less than 10%. Site-directed mutagenesis and kinetic analysis of the mutant enzymes, in conjunction with three-dimensional modeling, have identified distinct structural features that contribute to extreme halophilicity, thermostability, and high detoxification capacity, suggesting that these were acquired independently during the evolution of this enzyme. Thus, our work provides fundamental structural insights into a novel protein that has undergone multiple biochemical and biophysical adaptations to promote the survival of microorganisms that reside in the extremely demanding environment of the ATII-LCL.

Structure of the Aeropyrum pernix L7Ae multifunctional protein and insight into its extreme thermostability

Archaeal ribosomal protein L7Ae is a multifunctional RNA-binding protein that directs post-transcriptional modification of archaeal RNAs. The L7Ae protein from Aeropyrum pernix (Ap L7Ae), a member of the Crenarchaea, was found to have an extremely high melting temperature (>383 K). The crystal structure of Ap L7Ae has been determined to a resolution of 1.56 Å. The structure of Ap L7Ae was compared with the structures of two homologs: hyperthermophilic Methanocaldococcus jannaschii L7Ae and the mesophilic counterpart mammalian 15.5 kD protein. The primary stabilizing feature in the Ap L7Ae protein appears to be the large number of ion pairs and extensive ion-pair network that connects secondary-structural elements. To our knowledge, Ap L7Ae is among the most thermostable single-domain monomeric proteins presently observed.

PCRless library mutagenesis via oligonucleotide recombination in yeast

The directed evolution of biomolecules with new functions is largely performed in vitro, with PCR mutagenesis followed by high-throughput assays for desired activities. As synthetic biology creates impetus for generating biomolecules that function in living cells, new technologies are needed for performing mutagenesis and selection for directed evolution in vivo. Homologous recombination, routinely exploited for targeted gene alteration, is an attractive tool for in vivo library mutagenesis, yet surprisingly is not routinely used for this purpose. Here, we report the design and characterization of a yeast-based system for library mutagenesis of protein loops via oligonucleotide recombination. In this system, a linear vector is co-transformed with single-stranded mutagenic oligonucleotides. Using repair of nonsense codons engineered in three different active-site loops in the selectable marker TRP1 as a model system, we first optimized the recombination efficiency. Single-loop recombination was highly efficient, averaging 5%, or 4.0×10(5) recombinants. Multiple loops could be simultaneously mutagenized, although the efficiencies dropped to 0.2%, or 6.0×10(3) recombinants, for two loops and 0.01% efficiency, or 1.5×10(2) recombinants, for three loops. Finally, the utility of this system for directed evolution was tested explicitly by selecting functional variants from a mock library of 1:10(6) wild-type:nonsense codons. Sequencing showed that oligonucleotide recombination readily covered this large library, mutating not only the target codon but also encoded silent mutations on either side of the library cassette. Together these results establish oligonucleotide recombination as a simple and powerful library mutagenesis technique and advance efforts to engineer the cell for fully in vivo directed evolution.

Bisubstrate specificity in histidine/tryptophan biosynthesis isomerase from Mycobacterium tuberculosis by active site metamorphosis

In histidine and tryptophan biosynthesis, two related isomerization reactions are generally catalyzed by two specific single-substrate enzymes (HisA and TrpF), sharing a similar (β/α)(8)-barrel scaffold. However, in some actinobacteria, one of the two encoding genes (trpF) is missing and the two reactions are instead catalyzed by one bisubstrate enzyme (PriA). To unravel the unknown mechanism of bisubstrate specificity, we used the Mycobacterium tuberculosis PriA enzyme as a model. Comparative structural analysis of the active site of the enzyme showed that PriA undergoes a reaction-specific and substrate-induced metamorphosis of the active site architecture, demonstrating its unique ability to essentially form two different substrate-specific actives sites. Furthermore, we found that one of the two catalytic residues in PriA, which are identical in both isomerization reactions, is recruited by a substrate-dependent mechanism into the active site to allow its involvement in catalysis. Comparison of the structural data from PriA with one of the two single-substrate enzymes (TrpF) revealed substantial differences in the active site architecture, suggesting independent evolution. To support these observations, we identified six small molecule compounds that inhibited both PriA-catalyzed isomerization reactions but had no effect on TrpF activity. Our data demonstrate an opportunity for organism-specific inhibition of enzymatic catalysis by taking advantage of the distinct ability for bisubstrate catalysis in the M. tuberculosis enzyme.

Hyperthermophilic phosphotriesterases/lactonases for the environment and human health

In the last decades the idea to use enzymes for environmental bioremediation has been more and more proposed and, in the light of this, new solutions have been suggested and detailed studies on some classes of enzymes have been performed. In particular, our attention in the last few years has been focused on the enzymes belonging to the amidohydrolase superfamily. Several members of this superfamily are endowed with promiscuous activities. The term 'catalytic promiscuity' describes the capability of an enzyme to catalyse different chemical reactions, called secondary activities, at the active site responsible for the main activity. Recently, a new family of microbial lactonases with promiscuous phosphotriesterase activity, dubbed PTE-Like Lactonase (PLL), has been ascribed to the amidohydrolase superfamily. Among members of this family are enzymes found in the archaea Sulfolobus solfataricus and Sulfolobus acidocaldarius, which show high thermophilicity and thermal resistance. Enzymes showing phosphotriesterase activity are attractive from a biotechnological point of view because they are capable of hydrolysing the organophosphate phosphotriesters (OPs), a class of synthetic compounds employed worldwide both as insecticides and chemical warfare agents. Furthermore, from a basic point of view, studies of catalytic promiscuity offer clues to understand natural evolution of enzymes and to translate this into in vitro adaptation of enzymes to specific human needs. Thermostable enzymes able to hydrolyse OPs are considered good candidates for the set-up of efficient detoxification tools.

Structural determinants of the high thermal stability of SsoPox from the hyperthermophilic archaeon Sulfolobus solfataricus

Organophosphates (OPs) constitute the largest class of insecticides used worldwide and certain of them are potent nerve agents. Consequently, enzymes degrading OPs are of paramount interest, as they could be used as bioscavengers and biodecontaminants. Looking for a stable OPs catalyst, able to support industrial process constraints, a hyperthermophilic phosphotriesterase (PTE) (SsoPox) was isolated from the archaeon Sulfolobus solfataricus and was found to be highly thermostable. The solved 3D structure revealed that SsoPox is a noncovalent dimer, with lactonase activity against "quorum sensing signals", and therefore could represent also a potential weapon against certain pathogens. The structural basis of the high thermostability of SsoPox has been investigated by performing a careful comparison between its structure and that of two mesophilic PTEs from Pseudomonas diminuta and Agrobacterium radiobacter. In addition, the conformational stability of SsoPox against the denaturing action of temperature and GuHCl has been determined by means of circular dichroism and fluorescence measurements. The data suggest that the two fundamental differences between SsoPox and the mesophilic counterparts are: (a) a larger number of surface salt bridges, also involved in complex networks; (b) a tighter quaternary structure due to an optimization of the interactions at the interface between the two monomers.

Defining the role of salt bridges in protein stability

Although the energetic balance of forces stabilizing proteins has been established qualitatively over the last decades, quantification of the energetic contribution of particular interactions still poses serious problems. The reasons are the strong cooperativity and the interdependence ofnoncovalent interactions. Salt bridges are a typical example. One expects that ionizable side chains frequently form ion pairs in innumerable crystal structures. Since electrostatic attraction between opposite charges is strong per se, salt bridges can intuitively be regarded as an important factor stabilizing the native structure. Is that really so? In this chapter we critically reassess the available methods to delineate the role ofelectrostatic interactions and salt bridges to protein stability, and discuss the progress and the obstacles in this endeavor. The basic problem is that formation of salt bridges depends on the ionization properties of the participating groups, which is significantly influenced by the protein environment. Furthermore, salt bridges experience thermal fluctuations, continuously break and re-form, and their lifespan in solution is governed by the flexibility of the protein. Finally, electrostatic interactions are long-range and might be significant in the unfolded state, thus seriously influencing the energetic profile. Elimination of salt bridges by protonation/deprotonation at extreme pH or by mutation provides only rough energetic estimates, since there is no way to account for the nonadditive response of the protein moiety. From what we know so far, the strength of electrostatic interactions is strongly context-dependent, yet it is unlikely that salt bridges are dominant factors governing protein stability. Nevertheless, proteins from thermophiles and hyperthermophiles exhibit more, and frequently networked, salt bridges than proteins from the mesophilic counterparts. Increasing the thermal (not the thermodynamic) stability of proteins by optimization of charge-charge interactions is a good example for an evolutionary solution utilizing physical factors.

Cloning, sequence analysis and heterologous expression in Pichia pastoris of a gene encoding a thermostable cellobiose dehydrogenase from Myriococcum thermophilum

We cloned and expressed a gene encoding a thermostable cellobiose dehydrogenase (CDH) from the thermophilic ascomycete Myriococcum thermophilum. The 2904bp long open reading frame contained six introns located either close to the 5'- or 3'-end of the ORF. The corresponding cDNA of 2487bp was cloned into the expression vector pPICZalphaB to achieve inducible heterologous expression and secretion of the recombinant flavocytochrome in the methylotrophic yeast Pichia pastoris. Transformants were selected on media with normal and 10-fold increased zeocin concentration, and selected clones were tested for inducible extracellular production of the recombinant oxidoreductase. The maximally obtained volumetric activity was 0.25U/ml in YPM (rich) medium and 2.15U/ml in production stage (minimal) medium in a fed-batch fermentation. Recombinant CDH was purified in two consecutive chromatographic steps leading to a final specific activity of up to 7.4U/mg protein at 40 degrees C. Kinetic properties of the recombinant CDH were characterized and the temperature optimum for the recombinant CDH was determined at 63 degrees C. Certain properties of the sequence of MtCDH are discussed in context with thermal and proteolytic stability.

Crystal structure of a family 16 endoglucanase from the hyperthermophile Pyrococcus furiosus--structural basis of substrate recognition

Bacterial and archaeal endo-beta-1,3-glucanases that belong to glycoside hydrolase family 16 share a beta-jelly-roll fold, but differ significantly in sequence and in substrate specificity. The crystal structure of the laminarinase (EC 3.2.1.39) from the hyperthermophilic archaeon Pyrococcus furiosus (pfLamA) has been determined at 2.1 A resolution by molecular replacement. The pfLamA structure reveals a kink of six residues (72-77) at the entrance of the catalytic cleft. This peptide is absent in the endoglucanases from alkaliphilic Nocardiopsis sp. strain F96 and Bacillus macerans, two proteins displaying an overall fold similar to that of pfLamA, but with different substrate specificity. A deletion mutant of pfLamA, lacking residues 72-75, hydrolyses the mixed-linkage beta-1,3-1,4-glucan lichenan 10 times more efficiently than the wild-type protein, indicating the importance of the kink in substrate preference.

Molecular properties of two proteins homologous to PduO-type ATP:cob(I)alamin adenosyltransferase from Sulfolobus tokodaii

In the thermophilic archaeon Sulfolobus tokodaii, there are two genes homologous to PduO-type ATP:cob(I)alamin adenosyltransferase, ST1454 and ST2180. To address the structure and function of these two sequence-related proteins from one organism, we prepared them by using the Escherichia coli expression system and analyzed them by immunoblotting, matrix-assisted laser desorption ionization-time-of-flight mass spectroscopy, circular dichroism spectrometry, ATP:cobalamin adenosyltransferase assay, and X-ray crystallography. Immunoblotting and matrix-assisted laser desorption ionization-time-of-flight mass spectroscopy analyses showed that both these proteins are expressed in S. tokodaii cells as soluble proteins and are spontaneously digested at the N-terminal region. ATP:cob(I)alamin adenosyltransferase activity was detected for ST1454 but not for ST2180. ST2180 reduced the concentration of cob(I)alamin, suggesting that ST2180 might recognize cob(I)alamin as a ligand. The secondary structure of ST1454 was retained even in 7 M guanidine hydrochroride, whereas that of ST2180 was melted in 4.5 M guanidine hydrochloride. The X-ray crystal structural analysis revealed that the proteins shared a common structure: a trimer of five-helix bundles with a clockwise kink. There is a pocket surrounded by highly conserved residues, in which a polypropylene glycol 400 in the crystal structure of ST1454 was captured, suggesting that it is an active site. Structural comparison between these two proteins showed the difference in the number of ion pairs around the proposed active site. On the basis of these results, we propose that ST1454 and ST2180 have related but distinct functions.

The crystal structure of a hyperthermostable subfamily II isocitrate dehydrogenase from Thermotoga maritima

Isocitrate dehydrogenase (IDH) from the hyperthermophile Thermotoga maritima (TmIDH) catalyses NADP+- and metal-dependent oxidative decarboxylation of isocitrate to alpha-ketoglutarate. It belongs to the beta-decarboxylating dehydrogenase family and is the only hyperthermostable IDH identified within subfamily II. Furthermore, it is the only IDH that has been characterized as both dimeric and tetrameric in solution. We solved the crystal structure of the dimeric apo form of TmIDH at 2.2 A. The R-factor of the refined model was 18.5% (R(free) 22.4%). The conformation of the TmIDH structure was open and showed a domain rotation of 25-30 degrees compared with closed IDHs. The separate domains were found to be homologous to those of the mesophilic mammalian IDHs of subfamily II and were subjected to a comparative analysis in order to find differences that could explain the large difference in thermostability. Mutational studies revealed that stabilization of the N- and C-termini via long-range electrostatic interactions were important for the higher thermostability of TmIDH. Moreover, the number of intra- and intersubunit ion pairs was higher and the ionic networks were larger compared with the mesophilic IDHs. Other factors likely to confer higher stability in TmIDH were a less hydrophobic and more charged accessible surface, a more hydrophobic subunit interface, more hydrogen bonds per residue and a few loop deletions. The residues responsible for the binding of isocitrate and NADP+ were found to be highly conserved between TmIDH and the mammalian IDHs and it is likely that the reaction mechanism is the same.

Novel yeast cell-based assay to screen for inhibitors of human cytomegalovirus protease in a high-throughput format

The protease encoded by the human cytomegalovirus (HCMV) is an attractive target for antiviral drug development because of its essential function in viral replication. We describe here a cellular assay in the yeast Saccharomyces cerevisiae for the identification of small molecule inhibitors of HCMV protease by conditional growth in selective medium. In this system, the protease cleavage sequence is inserted into the N-(5'-phosphoribosyl)anthranilate isomerase (Trp1p), a yeast protein essential for cell proliferation in the absence of tryptophan. Coexpression of HCMV protease with the engineered Trp1p substrate in yeast cells results in site-specific cleavage and functional inactivation of the Trp1p enzyme, thereby leading to an arrest of cell proliferation. This growth arrest can be suppressed by the addition of validated HCMV protease inhibitors. The growth selection system presented here provides the basis for a high-throughput screen to identify HCMV protease inhibitors that are active in eukaryotic cells.

Crystal structure and structural stability of acylphosphatase from hyperthermophilic archaeon Pyrococcus horikoshii OT3

To elucidate the structural basis for the high stability of acylphosphatase (AcP) from Pyrococcus horikoshii OT3, we determined its crystal structure at 1.72 A resolution. P. horikoshii AcP possesses high stability despite its approximately 30% sequence identity with eukaryotic enzymes that have moderate thermostability. The overall fold of P. horikoshii AcP was very similar to the structures of eukaryotic counterparts. The crystal structure of P. horikoshii AcP shows the same fold betaalphabetabetaalphabeta topology and the conserved putative catalytic residues as observed in eukaryotic enzymes. Comparison with the crystal structure of bovine common-type AcP and that of D. melanogaster AcP (AcPDro2) as representative of eukaryotic AcP revealed some significant characteristics in P. horikoshii AcP that likely play important roles in structural stability: (1) shortening of the flexible N-terminal region and long loop; (2) an increased number of ion pairs on the protein surface; (3) stabilization of the loop structure by hydrogen bonds. In P. horikoshii AcP, two ion pair networks were observed one located in the loop structure positioned near the C-terminus, and other on the beta-sheet. The importance of ion pairs for structural stability was confirmed by site-directed mutation and denaturation induced by guanidium chloride.

Directed evolution of (βα)8-barrel enzymes

Natural molecular evolution supplies us with manifold examples of protein engineering. The imitation of these natural processes in the design of new enzymes has led to surprising and insightful results. Well-suited for design by evolutionary methods are enzymes with the common and versatile (betaalpha)(8)-barrel fold. Studies of enzyme stability, folding and design as well as the evolution of (betaalpha)(8)-barrel enzymes are discussed.

Transforming a (beta/alpha)8--barrel enzyme into a split-protein sensor through directed evolution

Split-protein sensors have become an important tool for the analysis of protein-protein interactions in living cells. We present here a combinatorial method for the generation of new split-protein sensors and demonstrate its application toward the (beta/alpha)(8)-barrel enzyme N-(5'-phosphoribosyl)-anthranilate isomerase Trp1p from Saccharomyces cerevisiae. The generated split-Trp protein sensors allow for the detection of protein-protein interactions in the cytosol as well as the membrane by enabling trp1 cells to grow on medium lacking tryptophan. This powerful selection complements the repertoire of the currently used split-protein sensors and provides a new tool for high-throughput interaction screening.

The crystal structure of the tryptophan synthase beta subunit from the hyperthermophile Pyrococcus furiosus. Investigation of stabilization factors

The structure of the tryptophan synthase beta2 subunit (Pfbeta2) from the hyperthermophile, Pyrococcus furiosus, was determined by X-ray crystallographic analysis at 2.2 A resolution, and its stability was examined by DSC. This is the first report of the X-ray structure of the tryptophan synthase beta2 subunit alone, although the structure of the tryptophan synthase alpha2beta2 complex from Salmonella typhimurium has already been reported. The structure of Pfbeta2 was essentially similar to that of the beta2 subunit (Stbeta2) in the alpha2beta2 complex from S. typhimurium. The sequence alignment with secondary structures of Pfbeta and Stbeta in monomeric form showed that six residues in the N-terminal region and three residues in the C-terminal region were deleted in Pfbeta, and one residue at Pro366 of Stbeta and at Ile63 of Pfbeta was inserted. The denaturation temperature of Pfbeta2 was higher by 35 degrees C than the reported values from mesophiles at approximately pH 8. On the basis of structural information on both proteins, the analyses of the contributions of each stabilization factor indicate that: (a) the higher stability of Pfbeta2 is not caused by either a hydrophobic interaction or an increase in ion pairs; (b) the number of hydrogen bonds involved in the main chains of Pfbeta is greater by about 10% than that of Stbeta, indicating that the secondary structures of Pfbeta are more stabilized than those of Stbeta and (c) the sequence of Pfbeta seems to be better fitted to an ideally stable structure than that of Stbeta, as assessed from X-ray structure data.

How Oligomerization Contributes to the Thermostability of an Archaeon Protein

To study how oligomerization may contribute to the thermostability of archaeon proteins, we focused on a hexameric protein, protein L-isoaspartyl-O-methyltransferase from Sulfolobus tokodaii (StoPIMT). The crystal structure shows that StoPIMT has a distinctive hexameric structure composed of monomers consisting of two domains: an S-adenosylmethionine-dependent methyltransferase fold domain and a C-terminal alpha-helical domain. The hexameric structure includes three interfacial contact regions: major, minor, and coiled-coil. Several C-terminal deletion mutants were constructed and characterized. The hexameric structure and thermostability were retained when the C-terminal alpha-helical domain (Tyr(206)-Thr(231)) was deleted, suggesting that oligomerization via coiled-coil association using the C-terminal alpha-helical domains did not contribute critically to hexamerization or to the increased thermostability of the protein. Deletion of three additional residues located in the major contact region, Tyr(203)-Asp(204)-Asp(205), led to a significant decrease in hexamer stability and chemico/thermostability. Although replacement of Thr(146) and Asp(204), which form two hydrogen bonds in the interface in the major contact region, with Ala did not affect hexamer formation, these mutations led to a significant decrease in thermostability, suggesting that two residues in the major contact region make significant contributions to the increase in stability of the protein via hexamerization. These results suggest that cooperative hexamerization occurs via interactions of "hot spot" residues and that a couple of interfacial hot spot residues are responsible for enhancing thermostability via oligomerization.

The 2.9A resolution crystal structure of malate dehydrogenase from Archaeoglobus fulgidus: mechanisms of oligomerisation and thermal stabilisation

The crystal structure of malate dehydrogenase from the hyperthermophilic archaeon Archeoglobus fulgidus, in complex with its cofactor NAD, was solved at 2.9A resolution. The crystal structure shows a compact homodimer with one coenzyme bound per subunit. The substrate binding site is occupied by a sulphate ion. In order to gain insight into adaptation mechanisms, which allow the protein to be stable and active at high temperatures, the 3D structure was compared to those of several thermostable and hyperthermostable homologues, and to halophilic malate dehydrogenase. The hyperthermostable A. fulgidus MalDH protein displays a reduction of the solvent-exposed surface, an optimised compact hydrophobic core, a high number of hydrogen bonds, and includes a large number of ion pairs at the protein surface. These features occur concomitantly with a reduced number of residues in the protein subunit, due to several deletions in loop regions. The loops are further stiffened by ion pair links with secondary structure elements. A. fulgidus malate dehydrogenase is the only dimeric protein known to date that belongs to the [LDH-like] MalDH family. All the other known members of this family are homo-tetramers. The crystal structures revealed that the association of the dimers to form tetramers is prevented by several deletions, taking place at the level of two loops that are known to be essential for the tetramerisation process within the LDH and [LDH-like] MalDH enzymes.

Crystal structure of the hyperthermophilic inorganic pyrophosphatase from the archaeon Pyrococcus horikoshii

A homolog to the eubacteria inorganic pyrophosphatase (PPase, EC 3.6.1.1) was found in the genome of the hyperthermophilic archaeon Pyrococcus horikoshii. This inorganic pyrophosphatase (Pho-PPase) grows optimally at 88 degrees C. To understand the structural basis for the thermostability of Pho-PPase, we have determined the crystal structure to 2.66 A resolution. The crystallographic asymmetric unit contains three monomers related by approximate threefold symmetry, and a hexamer is built up by twofold crystallographic symmetry. The main-chain fold of Pho-PPase is almost identical to that of the known crystal structure of the model from Sulfolobus acidocaldarius. A detailed comparison of the crystal structure of Pho-PPase with related structures from S. acidocaldarius, Thermus thermophilus, and Escherichia coli shows significant differences that may account for the difference in their thermostabilities. A reduction in thermolabile residues, additional aromatic residues, and more intimate association between subunits all contribute to the larger thermophilicity of Pho-PPase. In particular, deletions in two loops surrounding the active site help to stabilize its conformation, while ion-pair networks unique to Pho-PPase are located in the active site and near the C-terminus. The identification of structural features that make PPases more adaptable to extreme temperature should prove helpful for future biotechnology applications.

The first crystal structure of archaeal aldolase. Unique tetrameric structure of 2-deoxy-d-ribose-5-phosphate aldolase from the hyperthermophilic archaea Aeropyrum pernix

A gene encoding a 2-deoxy-d-ribose-5-phosphate aldolase (DERA) homolog was identified in the hyperthermophilic Archaea Aeropyrum pernix. The gene was overexpressed in Escherichia coli, and the produced enzyme was purified and characterized. The enzyme is an extremely thermostable DERA; its activity was not lost after incubation at 100 degrees C for 10 min. The enzyme has a molecular mass of approximately 93 kDa and consists of four subunits with an identical molecular mass of 24 kDa. This is the first report of the presence of tetrameric DERA. The three-dimensional structure of the enzyme was determined by x-ray analysis. The subunit folds into an alpha/beta-barrel. The asymmetric unit consists of two homologous subunits, and a crystallographic 2-fold axis generates the functional tetramer. The main chain coordinate of the monomer of the A. pernix enzyme is quite similar to that of the E. coli enzyme. There was no significant difference in hydrophobic interactions and the number of ion pairs between the monomeric structures of the two enzymes. However, a significant difference in the quaternary structure was observed. The area of the subunit-subunit interface in the dimer of the A. pernix enzyme is much larger compared with the E. coli enzyme. In addition, the A. pernix enzyme is 10 amino acids longer than the E. coli enzyme in the N-terminal region and has an additional N-terminal helix. The N-terminal helix produces a unique dimer-dimer interface. This promotes the formation of a functional tetramer of the A. pernix enzyme and strengthens the hydrophobic intersubunit interactions. These structural features are considered to be responsible for the extremely high stability of the A. pernix enzyme. This is the first description of the structure of hyperthermophilic DERA and of aldolase from the Archaea domain.

The crystal structure of Drosophila NLP-core provides insight into pentamer formation and histone binding

The nucleoplasmin-like protein from Drosophila (dNLP) functions as a chaperone for core histones and may remodel chromatin in embryos. We now report the crystal structure of a dNLP-core pentamer at 1.5 A resolution. The monomer has an eight-stranded, beta barrel topology that is similar to nucleoplasmin (Np). However, a signature beta hairpin is tucked in along the lateral surface of the dNLP-core pentamer, while it extends outward in the Np-core decamer. Drosophila NLP and Np both assemble histone octamers. This process may require each chaperone to form a decamer, which would create symmetric binding sites for the histones. Conformational differences between dNLP and Np may reflect their different oligomeric states, while a conserved, nonpolar subunit interface may allow conformational plasticity during histone binding.

Comparative analysis of thermoadaptation within the archaeal glyceraldehyde-3-phosphate dehydrogenases from mesophilic Methanobacterium bryantii and thermophilic Methanothermus fervidus

To gain insight into the molecular determinants of thermoadaptation within the family of archaeal glyceraldehyde-3-phosphate dehydrogenases (GAPDH), a homology-based 3-D model of the mesophilic GAPDH from Methanobacterium bryantii was built and compared with the crystal structure of the thermophilic GAPDH from Methanothermus fervidus. The homotetrameric model of the holoenzyme was initially assembled from identical subunits completed with NADP molecules. The structure was then refined by energy minimization and simulated-annealing procedures. PROCHECK and the 3-D profile method were used to appraise the model reliability. Striking molecular features underlying the difference in stability between the enzymes were deduced from their structural comparison. First, both the increase in hydrophobic contacts and the decrease in accessibility to the protein core were shown to discriminate in favor of the thermophilic enzyme. Besides, but to a lesser degree, the number of ion pairs involved in cooperative clusters appeared to correlate with thermostability. Finally, the decreased stability of the mesophilic enzyme was also predicted to proceed from both the lack of charge-dipole interactions within alpha-helices and the enhanced entropy of unfolding due to an increase in chain flexibility. Thus, archaeal GAPDHs appear to be governed by thermoadaptation rules that differ in some aspects from those previously observed within their eubacterial counterparts.

Structural basis for the enhanced thermal stability of alcohol dehydrogenase mutants from the mesophilic bacterium Clostridium beijerinckii: contribution of salt bridging

Previous research in our laboratory comparing the three-dimensional structural elements of two highly homologous alcohol dehydrogenases, one from the mesophile Clostridium beijerinckii (CbADH) and the other from the extreme thermophile Thermoanaerobacter brockii (TbADH), suggested that in the thermophilic enzyme, an extra intrasubunit ion pair (Glu224-Lys254) and a short ion-pair network (Lys257-Asp237-Arg304-Glu165) at the intersubunit interface might contribute to the extreme thermal stability of TbADH. In the present study, we used site-directed mutagenesis to replace these structurally strategic residues in CbADH with the corresponding amino acids from TbADH, and we determined the effect of such replacements on the thermal stability of CbADH. Mutations in the intrasubunit ion pair region increased thermostability in the single mutant S254K- and in the double mutant V224E/S254K-CbADH, but not in the single mutant V224E-CbADH. Both single amino acid replacements, M304R- and Q165E-CbADH, in the region of the intersubunit ion pair network augmented thermal stability, with an additive effect in the double mutant M304R/Q165E-CbADH. To investigate the precise mechanism by which such mutations alter the molecular structure of CbADH to achieve enhanced thermostability, we constructed a quadruple mutant V224E/S254K/Q165E/M304R-CbADH and solved its three-dimensional structure. The overall results indicate that the amino acid substitutions in CbADH mutants with enhanced thermal stability reinforce the quaternary structure of the enzyme by formation of an extended network of intersubunit ion pairs and salt bridges, mediated by water molecules, and by forming a new intrasubunit salt bridge.

The unique pentagonal structure of an archaeal Rubisco is essential for its high thermostability

We have previously determined the crystal structure of a novel pentagonal ribulose 1,5-bisphosphate carboxylase/oxygenase (Rubisco) from the hyperthermophilic archaeon, Thermococcus kodakaraensis KOD1. Here we have carried out biochemical studies to identify the necessities and/or advantages of this intriguing pentagonal structure. The structure indicated the presence of three neighboring residues (Glu-63, Arg-66, and Asp-69), participating in ionic interactions within unique dimer-dimer interfaces. We constructed three single mutant proteins (E63S, R66S, and D69S) and one triple mutant protein (E63S/R66S/D69S) by replacing the charged residues with serine. The wild type (WT) and all mutant proteins were purified and subjected to gel permeation chromatography at various temperatures. WT and D69S proteins were decameric at all temperatures examined between 30 and 90 degrees C. The majority of E63S and R66S were decamers at 30 degrees C but were found to gradually disassemble with the elevation in temperature. E63S/R66S/D69S was found in a dimeric form even at 30 degrees C. An interesting correlation was found between the subunit assembly and thermostability of the proteins. Circular dichroism and differential scanning calorimetry analyses indicated that the denaturation temperatures of dimeric enzymes (E63S, R66S, and E63S/R66S/D69S) were approximately 95 degrees C, whereas those of the enzymes retaining a decameric structure (WT and D69S) were approximately 110 degrees C. Disassembly into tetramer or dimer units did not alter the slopes of the Arrhenius plots, indicating that the decameric structure had no effect on catalytic performance per se. The results indicate that the decameric assembly of Tk-Rubisco contributes to enhance the thermostability of the enzyme. Taking into account the growth temperature of strain KOD1 (65-100 degrees C), the decameric structure of Tk-Rubisco can be considered essential for the stable presence of the enzyme in the host cells. This study provides an interesting example in which the thermostability of a protein can be enhanced by formation of a unique quaternary structure not found in mesophilic enzymes.

Global perspectives on proteins: comparing genomes in terms of folds, pathways and beyond

The sequencing of complete genomes provides us with a global view of all the proteins in an organism. Proteomic analysis can be done on a purely sequence-based level, with a focus on finding homologues and grouping them into families and clusters of orthologs. However, incorporating protein structure into this analysis provides valuable simplification; it allows one to collect together very distantly related sequences, thus condensing the proteome into a minimal number of 'parts.' We describe issues related to surveying proteomes in terms of structural parts, including methods for fold assignment and formats for comparisons (eg top-10 lists and whole-genome trees), and show how biases in the databases and in sampling can affect these surveys. We illustrate our main points through a case study on the unique protein properties evident in many thermophile genomes (eg more salt bridges). Finally, we discuss metabolic pathways as an even greater simplification of genomes. In comparison to folds these allow the organization of many more genes into coherent systems, yet can nevertheless be understood in many of the same terms.

Ionic network at the C-terminus of the beta-glycosidase from the hyperthermophilic archaeon Sulfolobus solfataricus: Functional role in the quaternary structure thermal stabilization

Biochemical, crystallographic, and computational data support the hypothesis that electrostatic interactions are among the dominant forces in stabilizing hyperthermophilic proteins. The thermostable beta-glycosidase from the hyperthermophile Sulfolobus solfataricus (Ssbeta-gly) is an interesting model system for the study of protein adaptation to high temperatures. The largest ion-pair network of Ssbeta-gly is located at the tetrameric interface of the molecule; in this paper, key residues in this region were modified by site-directed mutagenesis and the stability of the mutants was analyzed by kinetics of thermal denaturation. All mutations produced faster enzyme inactivation, suggesting that the C-terminal ionic network prevents the dissociation into monomers, which is the limiting step in the mechanism of Ssbeta-gly inactivation. Moreover, the calculated reaction order showed that the mechanism of inactivation depends on the mutation introduced, suggesting that intermediates maintaining enzymatic activity are produced during the inactivation transition of some, but not all, mutants. Molecular models of each mutant allow us to rationalize the experimental evidence and give support to the current theories on the mechanism of ion pair stabilization in proteins from hyperthermophiles.

The catalytic mechanism of indole-3-glycerol phosphate synthase: crystal structures of complexes of the enzyme from Sulfolobus solfataricus with substrate analogue, substrate, and product

Indoleglycerol phosphate synthase catalyzes the ring closure of an N-alkylated anthranilate to a 3-alkyl indole derivative, a reaction requiring Lewis acid catalysis in vitro. Here, we investigated the enzymatic reaction mechanism through X-ray crystallography of complexes of the hyperthermostable enzyme from Sulfolobus solfataricus with the substrate 1-(o-carboxyphenylamino) 1-deoxyribulose 5-phosphate, a substrate analogue and the product indole-3-glycerol phosphate. The substrate and the substrate analogue are bound to the active site in a similar, extended conformation between the previously identified phosphate binding site and a hydrophobic pocket for the anthranilate moiety. This binding mode is unproductive, because the carbon atoms that are to be joined are too far apart. The indole ring of the bound product resides in a second hydrophobic pocket adjacent to that of the anthranilate moiety of the substrate. Although the hydrophobic moiety of the substrate moves during catalysis from one hydrophobic pocket to the other, the triosephosphate moiety remains rigidly bound to the same set of hydrogen-bonding residues. Simultaneously, the catalytically important residues Lys53, Lys110 and Glu159 maintain favourable distances to the atoms of the ligand undergoing covalent changes. On the basis of these data, the structures of two putative catalytic intermediates were modelled into the active site. This new structural information and the modelling studies provide further insight into the mechanism of enzyme-catalyzed indole synthesis. The charged epsilon-amino group of Lys110 is the general acid, and the carboxylate group of Glu159 is the general base. Lys53 guides the substrate undergoing conformational transitions during catalysis, by forming a salt-bridge to the carboxylate group of its anthranilate moiety.

The crystal structure of the allosteric non-phosphorylating glyceraldehyde-3-phosphate dehydrogenase from the hyperthermophilic archaeum Thermoproteus tenax

The NAD(+)-dependent non-phosphorylating glyceraldehyde-3-phosphate dehydrogenase (GAPN) from the hyperthermophilic archaeum Thermoproteus tenax represents an archaeal member of the diverse superfamily of aldehyde dehydrogenases (ALDHs). GAPN catalyzes the irreversible oxidation of d-glyceraldehyde 3-phosphate to 3-phosphoglycerate. In this study, we present the crystal structure of GAPN in complex with its natural inhibitor NADP(+) determined by multiple anomalous diffraction methods. The structure was refined to a resolution of 2.4 A with an R-factor of 0.21. The overall fold of GAPN is similar to the structures of ALDHs described previously, consisting of three domains: a nucleotide-binding domain, a catalytic domain, and an oligomerization domain. Local differences in the active site are responsible for substrate specificity. The inhibitor NADP(+) binds at an equivalent site to the cosubstrate-binding site of other ALDHs and blocks the enzyme in its inactive state, possibly preventing the transition to the active conformation. Structural comparison between GAPN from the hyperthermophilic T. tenax and homologs of mesophilic organisms establishes several characteristics of thermostabilization. These include protection against heat-induced covalent modifications by reducing and stabilizing labile residues, a decrease in number and volume of empty cavities, an increase in beta-strand content, and a strengthening of subunit contacts by ionic and hydrophobic interactions.

Divergent evolution of enzymatic function: mechanistically diverse superfamilies and functionally distinct suprafamilies

The protein sequence and structure databases are now sufficiently representative that strategies nature uses to evolve new catalytic functions can be identified. Groups of divergently related enzymes whose members catalyze different reactions but share a common partial reaction, intermediate, or transition state (mechanistically diverse superfamilies) have been discovered, including the enolase, amidohydrolase, thiyl radical, crotonase, vicinal-oxygen-chelate, and Fe-dependent oxidase superfamilies. Other groups of divergently related enzymes whose members catalyze different overall reactions that do not share a common mechanistic strategy (functionally distinct suprafamilies) have also been identified: (a) functionally distinct suprafamilies whose members catalyze successive transformations in the tryptophan and histidine biosynthetic pathways and (b) functionally distinct suprafamilies whose members catalyze different reactions in different metabolic pathways. An understanding of the structural bases for the catalytic diversity observed in super- and suprafamilies may provide the basis for discovering the functions of proteins and enzymes in new genomes as well as provide guidance for in vitro evolution/engineering of new enzymes.

A novel tryptophan synthase beta-subunit from the hyperthermophile Thermotoga maritima. Quaternary structure, steady-state kinetics, and putative physiological role

Tryptophan synthase catalyzes the last two steps in the biosynthesis of the amino acid tryptophan. The enzyme is an alpha beta beta alpha complex in mesophilic microorganisms. The alpha-subunit (TrpA) catalyzes the cleavage of indoleglycerol phosphate to glyceraldehyde 3-phosphate and indole, which is channeled to the active site of the associated beta-subunit (TrpB1), where it reacts with serine to yield tryptophan. The TrpA and TrpB1 proteins are encoded by the adjacent trpA and trpB1 genes in the trp operon. The genomes of many hyperthermophilic microorganisms, however, contain an additional trpB2 gene located outside of the trp operon. To reveal the properties and potential physiological role of TrpB2, the trpA, trpB1, and trpB2 genes of Thermotoga maritima were expressed heterologously in Escherichia coli, and the resulting proteins were purified and characterized. TrpA and TrpB1 form the familiar alpha beta beta alpha complex, in which the two different subunits strongly activate each other. In contrast, TrpB2 forms a beta(2)-homodimer that has a high catalytic efficiency k(cat)/K(m)(indole) because of a very low K(m)(indole) but does not bind to TrpA. These results suggest that TrpB2 acts as an indole rescue protein, which prevents the escape of this costly hydrophobic metabolite from the cell at the high growth temperatures of hyperthermophiles.

The crystal structure of indoleglycerol-phosphate synthase from Thermotoga maritima. Kinetic stabilization by salt bridges

The crystal structure of the thermostable indoleglycerol-phosphate synthase from Thermotoga maritima (tIGPS) was determined at 2.5 A resolution. It was compared with the structures of the thermostable sIGPS from Sulfolobus solfataricus and of the thermolabile eIGPS from Escherichia coli. The main chains of the three (beta alpha)(8)-barrel proteins superimpose closely, and the packing of side chains in the beta-barrel cores, as well as the architecture of surface loops, is very similar. Both thermostable proteins have, however, 17 strong salt bridges, compared with only 10 in eIGPS. The number of additional salt bridges in tIGPS and sIGPS correlates well with their reduced rate of irreversible thermal inactivation at 90 degrees C. Only 3 of 17 salt bridges in tIGPS and sIGPS are topologically conserved. The major difference between the two proteins is the preference for interhelical salt bridges in sIGPS and intrahelical ones in tIGPS. The different implementation of salt bridges in the closely related proteins suggests that the stabilizing effect of salt bridges depends rather on the sum of their individual contributions than on their location. This observation is consistent with a protein unfolding mechanism where the simultaneous breakdown of all salt bridges is the rate-determining step.

Ion pairs and the thermotolerance of proteins from hyperthermophiles: a "traffic rule" for hot roads

The proteins from hyperthermophilic organisms maintain their biologically active structure at temperatures that are significantly higher than the denaturation temperatures of their mesophilic counterparts. The fact that there is usually a high degree of sequence and structural homology between these two classes of proteins suggests that the source of this extreme thermal tolerance is hidden in the delicate balance of the non-covalent interactions. Among the large number of factors identified in the literature as being responsible for the thermostability of these proteins, this article focuses on electrostatic interactions. It demonstrates that the optimization of electrostatic interactions by increasing of the number of salt bridges is a driving force for enhancement of the thermotolerance of proteins from hyperthermophilic microorganisms. This feature is less evident in proteins from thermophilic organisms and is absent from mesophile-derived proteins.

Stability, catalytic versatility and evolution of the (beta alpha)(8)-barrel fold

The (beta alpha)(8)-barrel is a versatile single-domain protein fold that is adopted by a large number of enzymes. The (beta alpha)(8)-barrel fold has been used as a model to elucidate the structural basis of protein thermostability and in studies to interconvert catalytic activities or substrate specificities by rational design or directed evolution. Recently, the (beta alpha)(4)-half-barrel was identified as a possible structural subdomain.

Thermal stability of pyrrolidone carboxyl peptidases from the hyperthermophilic Archaeon, Pyrococcus furiosus

The temperature adaptation of pyrrolidone carboxyl peptidase (PCP) from a hyperthermophile, Pyrococcus furiosus (Pf PCP), was characterized in the context of an assembly form of the protein which is a homotetramer at neutral pH. The Pf PCP exhibited maximal catalytic activity at 90-95 degrees C and its activity was higher in the temperature range 30-100 degrees C than its counterpart from the mesophilic Bacillus amyloliquefaciens (BaPCP). Thermal stability was monitored by differential scanning calorimetry (DSC). Two clearly separated peaks appeared on the DSC curves for Pf PCP at alkaline and acidic pH. Using the oxidized Pf PCP and two mutant proteins (Pf C188S and Pf C142/188S), it was found that the peaks on the high and low temperature sides of the DSC curve of Pf PCP were produced by the forms with an intersubunit disulfide bridge between the two subunits and without the bridge, respectively, indicating the stabilization effect of intersubunit disulfide bridges. The denaturation temperature (Td) of Pf PCP with intersubunit disulfide bridges was higher by 53 degrees C at pH 9.0 than that of BaPCP. An analysis of the equilibrium ultracentrifugation patterns showed that the tetrameric Pf C142/188S dissociated into dimers with decreasing pH in the acidic region and became monomer subunits at pH 2.5. The heat denaturation of Pf PCP and its two Cys mutants was highly reversible in the dimeric forms, but completely irreversible in the tetrameric form. The Td of Pf C142/188S decreased as the enzyme became dissociated, but the monomeric form of the protein was still folded at pH 2.5, although BaPCP was completely denatured at acidic pH. These results indicate that subunit interaction plays an important role in stabilizing PCP from P. furiosus in addition to the intrinsic enhanced stability of its monomer.

Purification, characterization and crystallization of thermostable anthranilate phosphoribosyltransferase from Sulfolobus solfataricus

Anthranilate phosphoribosyltransferase (TrpD; EC 2.4.2.18) from the hyperthermophilic archaeon Sulfolobus solfataricus (ssTrpD) was expressed in Escherichia coli, purified and crystallized. Analytical gel permeation chromatography revealed a homodimeric composition of the enzyme. The steady-state kinetic characteristics suggest tight binding of the substrate anthranilic acid and efficient catalysis at the physiological growth temperature of S. solfataricus. Crystals of ssTrpD diffract to better than 2.6 A resolution and preliminary X-ray characterization was carried out. The crystals are suitable for structure determination.

Hyperthermophilic enzymes: sources, uses, and molecular mechanisms for thermostability

Enzymes synthesized by hyperthermophiles (bacteria and archaea with optimal growth temperatures of > 80 degrees C), also called hyperthermophilic enzymes, are typically thermostable (i.e., resistant to irreversible inactivation at high temperatures) and are optimally active at high temperatures. These enzymes share the same catalytic mechanisms with their mesophilic counterparts. When cloned and expressed in mesophilic hosts, hyperthermophilic enzymes usually retain their thermal properties, indicating that these properties are genetically encoded. Sequence alignments, amino acid content comparisons, crystal structure comparisons, and mutagenesis experiments indicate that hyperthermophilic enzymes are, indeed, very similar to their mesophilic homologues. No single mechanism is responsible for the remarkable stability of hyperthermophilic enzymes. Increased thermostability must be found, instead, in a small number of highly specific alterations that often do not obey any obvious traffic rules. After briefly discussing the diversity of hyperthermophilic organisms, this review concentrates on the remarkable thermostability of their enzymes. The biochemical and molecular properties of hyperthermophilic enzymes are described. Mechanisms responsible for protein inactivation are reviewed. The molecular mechanisms involved in protein thermostabilization are discussed, including ion pairs, hydrogen bonds, hydrophobic interactions, disulfide bridges, packing, decrease of the entropy of unfolding, and intersubunit interactions. Finally, current uses and potential applications of thermophilic and hyperthermophilic enzymes as research reagents and as catalysts for industrial processes are described.