Crystal structure of an acylation transition-state analog of the TEM-1 beta-lactamase. Mechanistic implications for class A beta-lactamases

Covalent docking and molecular dynamics simulations reveal the specificity-shifting mutations Ala237Arg and Ala237Lys in TEM beta-lactamase

The rate of modern drug discovery using experimental screening methods still lags behind the rate at which pathogens mutate, underscoring the need for fast and accurate predictive simulations of protein evolution. Multidrug-resistant bacteria evade our defenses by expressing a series of proteins, the most famous of which is the 29-kilodalton enzyme, TEM β-lactamase. Considering these challenges, we applied a covalent docking heuristic to measure the effects of all possible alanine 237 substitutions in TEM due to this codon’s importance for catalysis and effects on the binding affinities of commercially-available β-lactam compounds. In addition to the usual mutations that reduce substrate binding due to steric hindrance, we identified two distinctive specificity-shifting TEM mutations, Ala237Arg and Ala237Lys, and their respective modes of action. Notably, we discovered and verified through minimum inhibitory concentration assays that, while these mutations and their bulkier side chains lead to steric clashes that curtail ampicillin binding, these same groups foster salt bridges with the negatively-charged side-chain of the cephalosporin cefixime, widely used in the clinic to treat multi-resistant bacterial infections. To measure the stability of these unexpected interactions, we used molecular dynamics simulations and found the binding modes to be stable despite the application of biasing forces. Finally, we found that both TEM mutants also bind strongly to other drugs containing negatively-charged R-groups, such as carumonam and ceftibuten. As with cefixime, this increased binding affinity stems from a salt bridge between the compounds’ negative moieties and the positively-charged side chain of the arginine or lysine, suggesting a shared mechanism. In addition to reaffirming the power of using simulations as molecular microscopes, our results can guide the rational design of next-generation β-lactam antibiotics and bring the community closer to retaking the lead against the recurrent threat of multidrug-resistant pathogens.

Metallo-β-lactamases in the Age of Multidrug Resistance: From Structure and Mechanism to Evolution, Dissemination, and Inhibitor Design

Antimicrobial resistance is one of the major problems in current practical medicine. The spread of genes coding for resistance determinants among bacteria challenges the use of approved antibiotics, narrowing the options for treatment. Resistance to carbapenems, last resort antibiotics, is a major concern. Metallo-β-lactamases (MBLs) hydrolyze carbapenems, penicillins, and cephalosporins, becoming central to this problem. These enzymes diverge with respect to serine-β-lactamases by exhibiting a different fold, active site, and catalytic features. Elucidating their catalytic mechanism has been a big challenge in the field that has limited the development of useful inhibitors. This review covers exhaustively the details of the active-site chemistries, the diversity of MBL alleles, the catalytic mechanism against different substrates, and how this information has helped developing inhibitors. We also discuss here different aspects critical to understand the success of MBLs in conferring resistance: the molecular determinants of their dissemination, their cell physiology, from the biogenesis to the processing involved in the transit to the periplasm, and the uptake of the Zn(II) ions upon metal starvation conditions, such as those encountered during an infection. In this regard, the chemical, biochemical and microbiological aspects provide an integrative view of the current knowledge of MBLs.

Theoretical Study on the Mechanism of the Acylate Reaction of β-Lactamase

Using density functional theory and a cluster approach, we study the reaction potential surface and compute Gibbs free energies for the acylate reaction of β-lactamase with penicillin G, where the solvent effect is important and taken into consideration. Two reaction paths are investigated: one is a multi-step process with a rate-limit energy barrier of 19.1 kcal/mol, which is relatively small, and the reaction can easily occur; the other is a one-step process with a barrier of 45.0 kcal/mol, which is large and thus makes the reaction hard to occur. The reason why the two paths have different barriers is explained.

Can We Exploit β-Lactamases Intrinsic Dynamics for Designing More Effective Inhibitors?

β-lactamases (BLs) represent the most frequent cause of antimicrobial resistance in Gram-negative bacteria. Despite the continuous efforts in the development of BL inhibitors (BLIs), new BLs able to hydrolyze the last developed antibiotics rapidly emerge. Moreover, the insurgence rate of effective mutations is far higher than the release of BLIs able to counteract them. This results in a shortage of antibiotics that is menacing the effective treating of infectious diseases. The situation is made even worse by the co-expression in bacteria of BLs with different mechanisms and hydrolysis spectra, and by the lack of inhibitors able to hit them all. Differently from other targets, BL flexibility has not been deeply exploited for drug design, possibly because of the small protein size, for their apparent rigidity and their high fold conservation. In this mini-review, we discuss the evidence for BL binding site dynamics being crucial for catalytic efficiency, mutation effect, and for the design of new inhibitors. Then, we report on identified allosteric sites in BLs and on possible allosteric inhibitors, as a strategy to overcome the frequent occurrence of mutations in BLs and the difficulty of competing efficaciously with substrates. Nevertheless, allosteric inhibitors could work synergistically with traditional inhibitors, increasing the chances of restoring bacterial susceptibility towards available antibiotics.

Structural Basis and Binding Kinetics of Vaborbactam in Class A β-Lactamase Inhibition

Class A β-lactamases are a major cause of β-lactam resistance in Gram-negative bacteria. The recently FDA-approved cyclic boronate vaborbactam is a reversible covalent inhibitor of class A β-lactamases, including CTX-M extended-spectrum β-lactamase and KPC carbapenemase, both frequently observed in the clinic. Intriguingly, vaborbactam displayed different binding kinetics and cell-based activity for these two enzymes, despite their similarity. A 1.0-Å crystal structure of CTX-M-14 demonstrated that two catalytic residues, K73 and E166, are positively charged and neutral, respectively. Meanwhile, a 1.25-Å crystal structure of KPC-2 revealed a more compact binding mode of vaborbactam versus CTX-M-14, as well as alternative conformations of W105. Together with kinetic analysis of W105 mutants, the structures demonstrate the influence of this residue and the unusual conformation of the β3 strand on the inactivation rate, as well as the stability of the reversible covalent bond with S70. Furthermore, studies of KPC-2 S130G mutant shed light on the different impacts of S130 in the binding of vaborbactam versus avibactam, another recently approved β-lactamase inhibitor. Taken together, these new data provide valuable insights into the inhibition mechanism of vaborbactam and future development of cyclic boronate inhibitors.

Acylation and deacylation mechanism and kinetics of penicillin G reaction with Streptomyces R61 DD-peptidase

Two quantum mechanical (QM)-cluster models are built for studying the acylation and deacylation mechanism and kinetics of Streptomyces R61 DD-peptidase with the penicillin G at atomic level detail. DD-peptidases are bacterial enzymes involved in the cross-linking of peptidoglycan to form the cell wall, necessary for bacterial survival. The cross-linking can be inhibited by antibiotic beta-lactam derivatives through acylation, preventing the acyl-enzyme complex from undergoing further deacylation. The deacylation step was predicted to be rate-limiting. Transition state and intermediate structures are found using density functional theory in this study, and thermodynamic and kinetic properties of the proposed mechanism are evaluated. The acyl-enzyme complex is found lying in a deep thermodynamic sink, and deacylation is indeed the severely rate-limiting step, leading to suicide inhibition of the peptidoglycan cross-linking. The usage of QM-cluster models is a promising technique to understand, improve, and design antibiotics to disrupt function of the Streptomyces R61 DD-peptidase.

Metallo-β-Lactamase Inhibitors Inspired on Snapshots from the Catalytic Mechanism

β-Lactam antibiotics are the most widely prescribed antibacterial drugs due to their low toxicity and broad spectrum. Their action is counteracted by different resistance mechanisms developed by bacteria. Among them, the most common strategy is the expression of β-lactamases, enzymes that hydrolyze the amide bond present in all β-lactam compounds. There are several inhibitors against serine-β-lactamases (SBLs). Metallo-β-lactamases (MBLs) are Zn(II)-dependent enzymes able to hydrolyze most β-lactam antibiotics, and no clinically useful inhibitors against them have yet been approved. Despite their large structural diversity, MBLs have a common catalytic mechanism with similar reaction species. Here, we describe a number of MBL inhibitors that mimic different species formed during the hydrolysis process: substrate, transition state, intermediate, or product. Recent advances in the development of boron-based and thiol-based inhibitors are discussed in the light of the mechanism of MBLs. We also discuss the use of chelators as a possible strategy, since Zn(II) ions are essential for substrate binding and catalysis.

Detecting Protein-Protein Interaction Based on Protein Fragment Complementation Assay

Proteins are the most critical executive molecules by responding to the instructions stored in the genetic materials in any form of life. More frequently, proteins do their jobs by acting as a roleplayer that interacts with other protein(s), which is more evident when the function of a protein is examined in the real context of a cell. Identifying the interactions between (or amongst) proteins is very crucial for the biochemistry investigation of an individual protein and for the attempts aiming to draw a holo-picture for the interacting members at the scale of proteomics (or protein-protein interactions mapping). Here, we introduced the currently available reporting systems that can be used to probe the interaction between candidate protein pairs based on the fragment complementation of some particular proteins. Emphasis was put on the principles and details of experimental design. These systems are dihydrofolate reductase (DHFR), β-lactamase, tobacco etch virus (TEV) protease, luciferase, β- galactosidase, GAL4, horseradish peroxidase (HRP), focal adhesion kinase (FAK), green fluorescent protein (GFP), and ubiquitin.

Machine Learning Classification Model for Functional Binding Modes of TEM-1 β-Lactamase

TEM family of enzymes is one of the most commonly encountered β-lactamases groups with different catalytic capabilities against various antibiotics. Despite the studies investigating the catalytic mechanism of TEM β-lactamases, the binding modes of these enzymes against ligands in different functional catalytic states have been largely overlooked. But the binding modes may play a critical role in the function and even the evolution of these proteins. In this work, a newly developed machine learning analysis approach to the recognition of protein dynamics states was applied to compare the binding modes of TEM-1 β-lactamase with regard to penicillin in different catalytic states. While conventional analysis methods, including principal components analysis (PCA), could not differentiate TEM-1 in different binding modes, the application of a machine learning method led to excellent classification models differentiating these states. It was also revealed that both reactant/product states and apo/product states are more differentiable than the apo/reactant states. The feature importance generated by the training procedure of the machine learning model was utilized to evaluate the contribution from residues at active sites and in different secondary structures. Key active site residues, Ser70 and Ser130, play a critical role in differentiating reactant/product states, while other active site residues are more important for differentiating apo/product states. Overall, this study provides new insights into the different dynamical function states of TEM-1 and may open a new venue for β-lactamases functional and evolutional studies in general.

Crystal Structure of Phosphoserine BlaC from Mycobacterium tuberculosis Inactivated by Bis(Benzoyl) Phosphate

Mycobacterium tuberculosis, the pathogen responsible for tuberculosis (TB), is the leading cause of death from infectious disease worldwide. The class A serine β-lactamase BlaC confers Mycobacterium tuberculosis resistance to conventional β-lactam antibiotics. As the primary mechanism of bacterial resistance to β-lactam antibiotics, the expression of a β-lactamase by Mycobacterium tuberculosis results in hydrolysis of the β-lactam ring and deactivation of these antibiotics. In this study, we conducted protein X-ray crystallographic analysis of the inactivation of BlaC, upon exposure to the inhibitor bis(benzoyl) phosphate. Crystal structure data confirms that serine β-lactamase is phosphorylated at the catalytic serine residue (Ser-70) by this phosphate-based inactivator. This new crystallographic evidence suggests a mechanism for phosphorylation of BlaC inhibition by bis(benzoyl) phosphate over acylation. Additionally, we confirmed that bis(benzoyl) phosphate inactivated BlaC in a time-dependent manner.

In vivo functional analysis of a class A β-lactamase-related protein essential for clavulanic acid biosynthesis in Streptomyces clavuligerus

In Streptomyces clavuligerus, the gene cluster involved in the biosynthesis of the clinically used β-lactamase inhibitor clavulanic acid contains a gene (orf12 or cpe) encoding a protein with a C-terminal class A β-lactamase-like domain. The cpe gene is essential for clavulanic acid production, and the recent crystal structure of its product (Cpe) was shown to also contain an N-terminal isomerase/cyclase-like domain, but the function of the protein remains unknown. In the current study, we show that Cpe is a cytoplasmic protein and that both its N- and C-terminal domains are required for in vivo clavulanic acid production in S. clavuligerus. Our results along with those from previous studies allude towards a biosynthetic role for Cpe during the later stages of clavulanic acid production in S. clavuligerus. Amino acids from Cpe essential for biosynthesis were also identified, including one (Lys₈₉) from the recently described N-terminal isomerase-like domain of unknown function. Homologues of Cpe from other clavulanic acid-producing Streptomyces spp. were shown to be functionally equivalent to the S. clavuligerus protein, whereas those from non-producers containing clavulanic acid-like gene clusters were not. The suggested in vivo involvement of an isomerase-like domain recruited by an ancestral β-lactamase related protein, supports a previous hypothesis that Cpe could be involved in a step requiring the opening and modification of the clavulanic acid core during its biosynthesis from 5S precursors.

Mapping Conformational Dynamics to Individual Steps in the TEM-1 β-Lactamase Catalytic Mechanism

Conformational dynamics are increasingly recognized as being essential for enzyme function. However, there is virtually no direct experimental evidence to support the notion that individual dynamic modes are required for specific catalytic processes, apart from the initial step of substrate binding. In this work, we use a unique approach based on millisecond hydrogen-deuterium exchange mass spectrometry to identify dynamic modes linked to individual catalytic processes in the antibiotic resistance enzyme TEM-1 β-lactamase. Using a "good" substrate (ampicillin), a poorly hydrolyzed substrate (cephalexin) and a covalent inhibitor (clavulanate), we are able to isolate dynamic modes that are specifically linked to substrate binding, productive lactam ring hydrolysis and deacylation. These discoveries are ultimately translated into specific targets for allosteric TEM-1 inhibitor development.

Conformational Intermediate That Controls KPC-2 Catalysis and Beta-Lactam Drug Resistance

The KPC-2 carbapenemase enzyme is responsible for drug resistance in the majority of carbapenem-resistant gram-negative bacterial infections in the United States. A better understanding of what permits KPC-2 to hydrolyze carbapenem antibiotics and how this might be inhibited is thus of fundamental interest and great practical importance to development of better anti-infectives. By correlating molecular dynamics simulations with experimental enzyme kinetics, we have identified conformational changes that control KPC-2's ability to hydrolyze carbapenem antibiotics. Related beta-lactamase enzymes can interconvert between catalytically permissive and catalytically nonpermissive forms of an acylenzyme intermediate critical to drug hydrolysis. Using molecular dynamics simulations, we identify a similar equilibrium in KPC-2 and analyze the determinants of this conformational change. Because the conformational dynamics of KPC-2 are complex and sensitive to allosteric changes, we develop an information-theoretic approach to identify key determinants of this change. We measure unbiased estimators of the reaction coordinate between catalytically permissive and nonpermissive states, perform information-theoretic feature selection and, using restrained molecular dynamics simulations, validate the protein conformational changes predicted to control catalytically permissive geometry. We identify two binding-pocket residues that control the conformational transitions between catalytically active and inactive forms of KPC-2. Mutations to one of these residues, Trp105, lower the stability of the catalytically permissive state in simulations and have reduced experimental k _cat values that show a strong linear correlation with the simulated catalytically permissive state lifetimes. This understanding can be leveraged to predict the drug resistance of further KPC-2 mutants and help design inhibitors to combat extreme drug resistance.

Structural and Kinetic Studies of the Potent Inhibition of Metallo-β-lactamases by 6-Phosphonomethylpyridine-2-carboxylates

There are currently no clinically available inhibitors of metallo-β-lactamases (MBLs), enzymes that hydrolyze β-lactam antibiotics and confer resistance to Gram-negative bacteria. Here we present 6-phosphonomethylpyridine-2-carboxylates (PMPCs) as potent inhibitors of subclass B1 (IMP-1, VIM-2, and NDM-1) and B3 (L1) MBLs. Inhibition followed a competitive, slow-binding model without an isomerization step (IC₅₀ values of 0.3-7.2 μM; K_i values of 0.03-1.5 μM). Minimum inhibitory concentration assays demonstrated potentiation of β-lactam (Meropenem) activity against MBL-producing bacteria, including clinical isolates, at concentrations at which eukaryotic cells remain viable. Crystal structures revealed unprecedented modes of binding of inhibitor to B1 (IMP-1) and B3 (L1) MBLs. In IMP-1, binding does not replace the nucleophilic hydroxide, and the PMPC carboxylate and pyridine nitrogen interact closely (2.3 and 2.7 Å, respectively) with the Zn2 ion of the binuclear metal site. The phosphonate group makes limited interactions but is 2.6 Å from the nucleophilic hydroxide. Furthermore, the presence of a water molecule interacting with the PMPC phosphonate and pyridine N-C2 π-bond, as well as the nucleophilic hydroxide, suggests that the PMPC binds to the MBL active site as its hydrate. Binding is markedly different in L1, with the phosphonate displacing both Zn2, forming a monozinc enzyme, and the nucleophilic hydroxide, while also making multiple interactions with the protein main chain and Zn1. The carboxylate and pyridine nitrogen interact with Ser221 and -223, respectively (3 Å distance). The potency, low toxicity, cellular activity, and amenability to further modification of PMPCs indicate these and similar phosphonate compounds can be further considered for future MBL inhibitor development.

Structural and mechanistic insights into the inhibition of class C β-lactamases through the adenylylation of the nucleophilic serine

Objectives

: Investigation into the adenylylation of the nucleophilic serine in AmpC BER and CMY-10 extended-spectrum class C β-lactamases.

Methods

: The formation and the stability of the adenylate adduct were examined by X-ray crystallography and MS. Inhibition assays for kinetic parameters were performed by monitoring the hydrolytic activity of AmpC BER and CMY-10 using nitrocefin as a reporter substrate. The effect of adenosine 5'-(P-acetyl)monophosphate (acAMP) on the MIC of ceftazidime was tested with four Gram-negative clinical isolates.

Results

: The crystal structures and MS analyses confirmed the acAMP-mediated adenylylation of the nucleophilic serine in AmpC BER and CMY-10. acAMP inhibited AmpC BER and CMY-10 through the adenylylation of the nucleophilic serine, which could be modelled as a two-step mechanism. The initial non-covalent binding of acAMP to the active site is followed by the covalent attachment of its AMP moiety to the nucleophilic serine. The inhibition efficiencies ( k inact / K I ) of acAMP against AmpC BER and CMY-10 were determined to be 320 and 140 M -1  s -1 , respectively. The combination of ceftazidime and acAMP reduced the MIC of ceftazidime against the tested bacteria.

Conclusions

: Our structural and kinetic studies revealed the detailed mechanism of adenylylation of the nucleophilic serine and may serve as a starting point for the design of novel class C β-lactamase inhibitors on the basis of the nucleotide scaffold.

Active-Site Protonation States in an Acyl-Enzyme Intermediate of a Class A β-Lactamase with a Monobactam Substrate

The monobactam antibiotic aztreonam is used to treat cystic fibrosis patients with chronic pulmonary infections colonized by Pseudomonas aeruginosa strains expressing CTX-M extended-spectrum β-lactamases. The protonation states of active-site residues that are responsible for hydrolysis have been determined previously for the apo form of a CTX-M β-lactamase but not for a monobactam acyl-enzyme intermediate. Here we used neutron and high-resolution X-ray crystallography to probe the mechanism by which CTX-M extended-spectrum β-lactamases hydrolyze monobactam antibiotics. In these first reported structures of a class A β-lactamase in an acyl-enzyme complex with aztreonam, we directly observed most of the hydrogen atoms (as deuterium) within the active site. Although Lys 234 is fully protonated in the acyl intermediate, we found that Lys 73 is neutral. These findings are consistent with Lys 73 being able to serve as a general base during the acylation part of the catalytic mechanism, as previously proposed.

Novel Computational Protocols for Functionally Classifying and Characterising Serine Beta-Lactamases

Beta-lactamases represent the main bacterial mechanism of resistance to beta-lactam antibiotics and are a significant challenge to modern medicine. We have developed an automated classification and analysis protocol that exploits structure- and sequence-based approaches and which allows us to propose a grouping of serine beta-lactamases that more consistently captures and rationalizes the existing three classification schemes: Classes, (A, C and D, which vary in their implementation of the mechanism of action); Types (that largely reflect evolutionary distance measured by sequence similarity); and Variant groups (which largely correspond with the Bush-Jacoby clinical groups). Our analysis platform exploits a suite of in-house and public tools to identify Functional Determinants (FDs), i.e. residue sites, responsible for conferring different phenotypes between different classes, different types and different variants. We focused on Class A beta-lactamases, the most highly populated and clinically relevant class, to identify FDs implicated in the distinct phenotypes associated with different Class A Types and Variants. We show that our FunFHMMer method can separate the known beta-lactamase classes and identify those positions likely to be responsible for the different implementations of the mechanism of action in these enzymes. Two novel algorithms, ASSP and SSPA, allow detection of FD sites likely to contribute to the broadening of the substrate profiles. Using our approaches, we recognise 151 Class A types in UniProt. Finally, we used our beta-lactamase FunFams and ASSP profiles to detect 4 novel Class A types in microbiome samples. Our platforms have been validated by literature studies, in silico analysis and some targeted experimental verification. Although developed for the serine beta-lactamases they could be used to classify and analyse any diverse protein superfamily where sub-families have diverged over both long and short evolutionary timescales.

Exploring the Mechanism of β-Lactam Ring Protonation in the Class A β-lactamase Acylation Mechanism Using Neutron and X-ray Crystallography

The catalytic mechanism of class A β-lactamases is often debated due in part to the large number of amino acids that interact with bound β-lactam substrates. The role and function of the conserved residue Lys 73 in the catalytic mechanism of class A type β-lactamase enzymes is still not well understood after decades of scientific research. To better elucidate the functions of this vital residue, we used both neutron and high-resolution X-ray diffraction to examine both the structures of the ligand free protein and the acyl-enzyme complex of perdeuterated E166A Toho-1 β-lactamase with the antibiotic cefotaxime. The E166A mutant lacks a critical glutamate residue that has a key role in the deacylation step of the catalytic mechanism, allowing the acyl-enzyme adduct to be captured for study. In our ligand free structures, Lys 73 is present in a single conformation, however in all of our acyl-enzyme structures, Lys 73 is present in two different conformations, in which one conformer is closer to Ser 70 while the other conformer is positioned closer to Ser 130, which supports the existence of a possible pathway by which proton transfer from Lys 73 to Ser 130 can occur. This and further clarifications of the role of Lys 73 in the acylation mechanism may facilitate the design of inhibitors that capitalize on the enzyme's native machinery.

Class D β-lactamases: a reappraisal after five decades

Despite 70 years of clinical use, β-lactam antibiotics still remain at the forefront of antimicrobial chemotherapy. The major challenge to these life-saving therapeutics is the presence of bacterial enzymes (i.e., β-lactamases) that can hydrolyze the β-lactam bond and inactivate the antibiotic. These enzymes can be grouped into four classes (A-D). Among the most genetically diverse are the class D β-lactamases. In this class are β-lactamases that can inactivate the entire spectrum of β-lactam antibiotics (penicillins, cephalosporins, and carbapenems). Class D β-lactamases are mostly found in Gram-negative bacteria such as Pseudomonas aeruginosa , Escherichia coli , Proteus mirabilis , and Acinetobacter baumannii . The active-sites of class D β-lactamases contain an unusual N-carboxylated lysine post-translational modification. A strongly hydrophobic active-site helps create the conditions that allow the lysine to combine with CO2, and the resulting carbamate is stabilized by a number of hydrogen bonds. The carboxy-lysine plays a symmetric role in the reaction, serving as a general base to activate the serine nucleophile in the acylation reaction, and the deacylating water in the second step. There are more than 250 class D β-lactamases described, and the full set of variants shows remarkable diversity with regard to substrate binding and turnover. Narrow-spectrum variants are most effective against the earliest generation penicillins and cephalosporins such as ampicillin and cephalothin. Extended-spectrum variants (also known as extended-spectrum β-lactamases, ESBLs) pose a more dangerous clinical threat as they possess a small number of substitutions that allow them to bind and hydrolyze later generation cephalosporins that contain bulkier side-chain constituents (e.g., cefotaxime, ceftazidime, and cefepime). Mutations that permit this versatility seem to cluster in the area surrounding an active-site tryptophan resulting in a widened active-site to accommodate the oxyimino side-chains of these cephalosporins. More concerning are the class D β-lactamases that hydrolyze clinically important carbapenem β-lactam drugs (e.g., imipenem). Whereas carbapenems irreversibly acylate and inhibit narrow-spectrum β-lactamases, class D carbapenemases are able to recruit and activate a deacylating water. The rotational orientation of the C6 hydroxyethyl group found on all carbapenem antibiotics likely plays a role in whether the deacylating water is effective or not. Inhibition of class D β-lactamases is a current challenge. Commercially available inhibitors that are active against other classes of β-lactamases are ineffective against class D enzymes. On the horizon are several compounds, consisting of both β-lactam derivatives and non-β-lactams, that have the potential of providing novel leads to design new mechanism-based inactivators that are effective against the class D enzymes. Several act synergistically when given in combination with a β-lactam antibiotic, and others show a unique mechanism of inhibition that is distinct from the traditional β-lactamase inhibitors. These studies will bolster structure-based inhibitor design efforts to facilitate the optimization and development of these compounds as class D inactivators.

Neutron and X-ray crystal structures of a perdeuterated enzyme inhibitor complex reveal the catalytic proton network of the Toho-1 β-lactamase for the acylation reaction

The mechanism by which class A β-lactamases hydrolyze β-lactam antibiotics has been the subject of intensive investigation using many different experimental techniques. Here, we report on the novel use of both neutron and high resolution x-ray diffraction to help elucidate the identity of the catalytic base in the acylation part of the catalytic cycle, wherein the β-lactam ring is opened and an acyl-enzyme intermediate forms. To generate protein crystals optimized for neutron diffraction, we produced a perdeuterated form of the Toho-1 β-lactamase R274N/R276N mutant. Protein perdeuteration, which involves replacing all of the hydrogen atoms in a protein with deuterium, gives a much stronger signal in neutron diffraction and enables the positions of individual deuterium atoms to be located. We also synthesized a perdeuterated acylation transition state analog, benzothiophene-2-boronic acid, which was also isotopically enriched with (11)B, as (10)B is a known neutron absorber. Using the neutron diffraction data from the perdeuterated enzyme-inhibitor complex, we were able to determine the positions of deuterium atoms in the active site directly rather than by inference. The neutron diffraction results, along with supporting bond-length analysis from high resolution x-ray diffraction, strongly suggest that Glu-166 acts as the general base during the acylation reaction.

Development of new drugs for an old target: the penicillin binding proteins

The widespread use of β-lactam antibiotics has led to the worldwide appearance of drug-resistant strains. Bacteria have developed resistance to β-lactams by two main mechanisms: the production of β-lactamases, sometimes accompanied by a decrease of outer membrane permeability, and the production of low-affinity, drug resistant Penicillin Binding Proteins (PBPs). PBPs remain attractive targets for developing new antibiotic agents because they catalyse the last steps of the biosynthesis of peptidoglycan, which is unique to bacteria, and lies outside the cytoplasmic membrane. Here we summarize the “current state of the art” of non-β-lactam inhibitors of PBPs, which have being developed in an attempt to counter the emergence of β-lactam resistance. These molecules are not susceptible to hydrolysis by β-lactamases and thus present a real alternative to β-lactams. We present transition state analogs such as boronic acids, which can covalently bind to the active serine residue in the catalytic site. Molecules containing ring structures different from the β-lactam-ring like lactivicin are able to acylate the active serine residue. High throughput screening methods, in combination with virtual screening methods and structure based design, have allowed the development of new molecules. Some of these novel inhibitors are active against major pathogens, including methicillin-resistant Staphylococcus aureus (MRSA) and thus open avenues new for the discovery of novel antibiotics.

Theoretical investigation on reaction of sulbactam with wild-type SHV-1 β-lactamase: acylation, tautomerization, and deacylation

Molecular dynamics (MD) simulation and quantum mechanical (QM) calculations were used to investigate the reaction mechanism of sulbactam with class A wild-type SHV-1 β-lactamase including acylation, tautomerization, and deacylation. Five different sulbactam-enzyme configurations were investigated by MD simulations. In the acylation step, we found that Glu166 cannot activate Ser70 directly for attacking on the carbonyl carbon, and Lys73 would participate in the reaction acting as a relay. Additionally, we found that sulbactam carboxyl can also act as a general base. QM calculations were performed on the formation mechanism of linear intermediates. We suggest that both imine and trans-enamine intermediates can be obtained in the opening of a five-membered thiazolidine ring. By MD simulation, we found that imine intermediate can exist in two conformations, which can generate subsequent trans- and cis-enamine intermediates, respectively. The QM calculations revealed that trans-enamine intermediate is much more stable than other intermediates. The deacylation mechanism of three linear intermediates (imine, trans-enamine, cis-enamine) was investigated separately. It is remarkably noted that, in cis-enamine intermediate, Glu166 cannot activate water for attacking on the carbonyl carbon directly. This leads to a decreasing of the deacylation rate of cis-enamine. These findings will be potentially useful in the development of new inhibitors.

Structure of the extended-spectrum β-lactamase TEM-72 inhibited by citrate

TEM-72, a class A β-lactamase identified in isolates of Enterobacteriaceae, is a quadruple mutant of TEM-1 (Q39K, M182T, G238S and E240K) and shows extended-spectrum β-lactamase (ESBL) properties arising from the G238S and E240K substitutions. Although many structures of TEM variants have been published, they do not include an enzyme with the simultaneous presence of both of the ESBL-conferring G238S and E240K substitutions. Furthermore, the structure shows the presence of a citrate anion bound to the TEM-72 active site, where it interacts with all of the conserved residues of class A β-lactamases. The present structure supports the use of polycarboxylates as a scaffold for the design of broad-spectrum inhibitors of serine β-lactamases.

Design, synthesis, crystal structures, and antimicrobial activity of sulfonamide boronic acids as β-lactamase inhibitors

We investigated a series of sulfonamide boronic acids that resulted from the merging of two unrelated AmpC β-lactamase inhibitor series. The new boronic acids differed in the replacement of the canonical carboxamide, found in all penicillin and cephalosporin antibiotics, with a sulfonamide. Surprisingly, these sulfonamides had a highly distinct structure-activity relationship from the previously explored carboxamides, high ligand efficiencies (up to 0.91), and K(i) values down to 25 nM and up to 23 times better for smaller analogues. Conversely, K(i) values were 10-20 times worse for larger molecules than in the carboxamide congener series. X-ray crystal structures (1.6-1.8 Å) of AmpC with three of the new sulfonamides suggest that this altered structure-activity relationship results from the different geometry and polarity of the sulfonamide versus the carboxamide. The most potent inhibitor reversed β-lactamase-mediated resistance to third generation cephalosporins, lowering their minimum inhibitory concentrations up to 32-fold in cell culture.

Engineering allosteric regulation into the hinge region of a circularly permuted TEM-1 beta-lactamase

In nature, the activity of many enzymes involved in important biochemical pathways is controlled by binding a ligand in a site remote from the active site. The allosteric sites are frequently located in hinge regulatory subunits, in which a conformational change can occur and propagate to the active site. The enzymatic activity is then enhanced or decreased depending on the type of effectors. Many artificial binding sites have been created to engineer an allosteric regulation. Generally, these sites were engineered near the active site in loops or at the surface of contiguous helices or strands but rarely in hinge regions. This work aims at exploring the possibility of regulating a monomeric enzyme whose active site is located at the interface between two domains. We anticipated that binding of a ligand in the hinge region linking the domains would modify their positioning and, consequently, modulate the activity. Here, we describe the design of two mutants in a circularly permuted TEM-1 (cpTEM-1) beta-lactamase. The first one, cpTEM-1-His(3) was created by a rational design. It shows little regulation upon metal ion binding except for a weak activation with Zn(2+). The second one, cpTEM-1-3M-His(2), was selected by a directed evolution strategy. It is allosterically down-regulated by Zn(2+), Ni(2+) and Co(2+) with binding affinities around 300 microM.

Quantitative comparison of catalytic mechanisms and overall reactions in convergently evolved enzymes: implications for classification of enzyme function

Functionally analogous enzymes are those that catalyze similar reactions on similar substrates but do not share common ancestry, providing a window on the different structural strategies nature has used to evolve required catalysts. Identification and use of this information to improve reaction classification and computational annotation of enzymes newly discovered in the genome projects would benefit from systematic determination of reaction similarities. Here, we quantified similarity in bond changes for overall reactions and catalytic mechanisms for 95 pairs of functionally analogous enzymes (non-homologous enzymes with identical first three numbers of their EC codes) from the MACiE database. Similarity of overall reactions was computed by comparing the sets of bond changes in the transformations from substrates to products. For similarity of mechanisms, sets of bond changes occurring in each mechanistic step were compared; these similarities were then used to guide global and local alignments of mechanistic steps. Using this metric, only 44% of pairs of functionally analogous enzymes in the dataset had significantly similar overall reactions. For these enzymes, convergence to the same mechanism occurred in 33% of cases, with most pairs having at least one identical mechanistic step. Using our metric, overall reaction similarity serves as an upper bound for mechanistic similarity in functional analogs. For example, the four carbon-oxygen lyases acting on phosphates (EC 4.2.3) show neither significant overall reaction similarity nor significant mechanistic similarity. By contrast, the three carboxylic-ester hydrolases (EC 3.1.1) catalyze overall reactions with identical bond changes and have converged to almost identical mechanisms. The large proportion of enzyme pairs that do not show significant overall reaction similarity (56%) suggests that at least for the functionally analogous enzymes studied here, more stringent criteria could be used to refine definitions of EC sub-subclasses for improved discrimination in their classification of enzyme reactions. The results also indicate that mechanistic convergence of reaction steps is widespread, suggesting that quantitative measurement of mechanistic similarity can inform approaches for functional annotation.

Hydration of acetone in the gas phase and in water solvent

In water solvent, the hydration of acetone proceeds by a cyclic (cooperative) process in which concurrent C–O bond formation and proton transfer to oxygen take place through a solvent and (or) catalyst bridge. Reactivity is determined primarily by the concentration of a reactant complex and not the barrier from this complex. This situation is reversed in the gas phase; although the concentrations of reactive complexes are much higher than in solution, the barriers are also higher and dominant in determining reactivity. Calculations of isotope effects suggest that multiple hydron transfers are synchronous in the gas phase to avoid zwitterionic transition states. In solution, such transition states are stabilized by solvation and hydron transfers can be asynchronous.

Neutron diffraction studies of a class A beta-lactamase Toho-1 E166A/R274N/R276N triple mutant

beta-Lactam antibiotics have been used effectively over several decades against many types of bacterial infectious diseases. However, the most common cause of resistance to the beta-lactam antibiotics is the production of beta-lactamase enzymes that inactivate beta-lactams by rapidly hydrolyzing the amide group of the beta-lactam ring. Specifically, the class A extended-spectrum beta-lactamases (ESBLs) and inhibitor-resistant enzymes arose that were capable of hydrolyzing penicillins and the expanded-spectrum cephalosporins and monobactams in resistant bacteria, which lead to treatment problems in many clinical settings. A more complete understanding of the mechanism of catalysis of these ESBL enzymes will impact current antibiotic drug discovery efforts. Here, we describe the neutron structure of the class A, CTX-M-type ESBL Toho-1 E166A/R274N/R276N triple mutant in its apo form, which is the first reported neutron structure of a beta-lactamase enzyme. This neutron structure clearly reveals the active-site protonation states and hydrogen-bonding network of the apo Toho-1 ESBL prior to substrate binding and subsequent acylation. The protonation states of the active-site residues Ser70, Lys73, Ser130, and Lys234 in this neutron structure are consistent with the prediction of a proton transfer pathway from Lys73 to Ser130 that is likely dependent on the conformation of Lys73, which has been hypothesized to be coupled to the protonation state of Glu166 during the acylation reaction. Thus, this neutron structure is in agreement with a proposed mechanism for acylation that identifies Glu166 as the general base for catalysis.

Inhibition of class A and C beta-lactamases by diaroyl phosphates

A series of diaroyl phosphates was employed to assess the general reactivity of this class of molecule against classical class A and class C beta-lactamases. The compounds were found, in general, to be inhibitory substrates of both classes of enzyme. In each case, they reacted rapidly with the enzyme (10(4) to 10(6) s(-1) M(-1)) to yield transiently stable intermediates, most likely acyl-enzymes, which slowly (10(-3) to 10(-1) s(-1)) regenerated free enzyme. In certain cases, side branches from direct turnover produced EII complexes ("substrate" inhibition), more inert EI' complexes, and, in one case, a completely inactive EI' complex. Deacylation, but not acylation, was enhanced by electron-withdrawing substituents. Acylation rates were enhanced by hydrophobic substitution, both in the diaroyl phosphate and at the enzyme active site. The latter factor led to the general order of beta-lactamase acylation rates: class D (previous results) > class C > class A. It is likely that nanomolar inhibitors of all serine beta-lactamases could be achieved by rational exploitation of diacyl phosphates.

Simulated annealing exploration of an active-site tyrosine in TEM-1 beta-lactamase suggests the existence of alternate conformations

TEM-1 is a class A beta-lactamase that contributes to the primary defensive measure used by bacteria to hydrolyze the clinically-relevant beta-lactam antibiotics. Several crystal structures of this enzyme complexed with inhibitors display the active-site residue Tyr105 in an alternate orientation relative to that assigned in the free or in the substrate-bound forms. Thus, the alternate conformation may not be favored in the free enzyme and may be adopted only in the presence of inhibitor. As the residue at position 105 is a determinant of substrate specificity, we sought a better understanding of the relation between its conformation and its function in ligand binding. Here, we perform a molecular dynamics simulated annealing protocol to identify stable orientations adopted by Tyr105 in free TEM-1. Our results demonstrate that, in the absence of substrate, structurally validated conformers of Tyr105 predominantly adopt either of the two rotameric orientations observed in the crystal structures. This suggests that adoption of either conformation in the free enzyme is energetically favored and is not strictly promoted by ligand binding. We propose that free TEM-1 alternates between these two conformations of Tyr105 and that a dynamically heterogeneous population of both rotamers exists in solution. The conformational change significantly reshapes the active-site cavity and modifies the potential for forming specific ligand contacts. Our results add to the body of evidence suggesting that Tyr105 displays a dynamical behavior resulting in alternate ligand binding modes and are consistent with the lower affinity of TEM-1 for cephalosporins relative to penicillins.

Inhibitors of VIM-2 by screening pharmacologically active and click-chemistry compound libraries

VIM-2 is an Ambler class B metallo-beta-lactamase (MBL) capable of hydrolyzing a broad-spectrum of beta-lactam antibiotics. Although the discovery and development of MBL inhibitors continue to be an area of active research, an array of potent, small molecule inhibitors is yet to be fully characterized for VIM-2. In the presented research, a compound library screening approach was used to identify and characterize VIM-2 inhibitors from a library of pharmacologically active compounds as well as a focused 'click' chemistry library. The four most potent VIM-2 inhibitors resulting from a VIM-2 screen were characterized by kinetic studies in order to determine K(i) and mechanism of enzyme inhibition. As a result, two previously described pharmacologic agents, mitoxantrone (1,4-dihydroxy-5,8-bis([2-([2-hydroxyethyl]amino)ethyl]amino)-9,10-anthracenedione) and 4-chloromercuribenzoic acid (pCMB) were found to be active, the former as a non-competitive inhibitor (K(i)=K(i)(')=1.5+/-0.2microM) and the latter as a slowly reversible or irreversible inhibitor. Additionally, two novel sulfonyl-triazole analogs from the click library were identified as potent, competitive VIM-2 inhibitors: N-((4-((but-3-ynyloxy)methyl)-1H-1,2,3-triazol-5-yl)methyl)-4-iodobenzenesulfonamide (1, K(i)=0.41+/-0.03microM) and 4-iodo-N-((4-(methoxymethyl)-1H-1,2,3-triazol-5-yl)methyl)benzenesulfonamide (2, K(i)=1.4+/-0.10microM). Mitoxantrone and pCMB were also found to potentiate imipenem efficacy in MIC and synergy assays employing Escherichia coli. Taken together, all four compounds represent useful chemical probes to further investigate mechanisms of VIM-2 inhibition in biochemical and microbiology-based assays.

Understanding the functional roles of amino acid residues in enzyme catalysis

The MACiE database contains 223 distinct step-wise enzyme reaction mechanisms and holds representatives from each EC sub-subclass where there is a crystal structure and sufficient evidence in the literature to support a mechanism. Each catalytic step of every reaction sequence in MACiE is fully annotated so that it includes the function of the catalytic residues involved in the reaction and the mechanism by which substrates are transformed into products. Using MACiE as a knowledge base, we have seen that the top 10 most catalytic residues are histidine, aspartate, glutamate, lysine, cysteine, arginine, serine, threonine, tyrosine and tryptophan. Of these only seven (cysteine, histidine, aspartate, lysine, serine, threonine and tyrosine) dominate catalysis and provide essentially five functional roles that are essential. Stabilisation is the most common and essential role for all classes of enzyme, followed by general acid/base (proton acceptor and proton donor) functionality, with nucleophilic addition following closely behind (nucleophile and nucleofuge). We investigated the occurrence of these residues in MACiE and the Catalytic Site Atlas and found that, as expected, certain residue types are associated with each functional role, with some residue types able to perform diverse roles. In addition, it was seen that different EC classes of enzyme have a tendency to employ different residues for catalysis. Further, we show that whilst the differences between EC classes in catalytic residue composition are not immediately obvious from the general classes of Ingold mechanisms, there is some weak correlation between the mechanisms involved in a given EC class and the functions that the catalytic amino acid residues are performing. The analysis presented here provides a valuable insight into the functional roles of catalytic amino acid residues, which may have applications in many aspects of enzymology, from the design of novel enzymes to the prediction and validation of enzyme reaction mechanisms.

Using reaction mechanism to measure enzyme similarity

The concept of reaction similarity has been well studied in terms of the overall transformation associated with a reaction, but not in terms of mechanism. We present the first method to give a quantitative measure of the similarity of reactions based upon their explicit mechanisms. Two approaches are presented to measure the similarity between individual steps of mechanisms: a fingerprint-based approach that incorporates relevant information on each mechanistic step; and an approach based only on bond formation, cleavage and changes in order. The overall similarity for two reaction mechanisms is then calculated using the Needleman-Wunsch alignment algorithm. An analysis of MACiE, a database of enzyme mechanisms, using our measure of similarity identifies some examples of convergent evolution of chemical mechanisms. In many cases, mechanism similarity is not reflected by similarity according to the EC system of enzyme classification. In particular, little mechanistic information is conveyed by the class level of the EC system.

Modeling study of the influences of the aromatic transitions and the local environment on the far-UV rotational strengths in TEM-1 β-lactamase

Rotational strengths in the far-UV of TEM-1 beta-lactamase have been investigated with two theoretical models based on the matrix method. The first model excludes, and a second includes, effects of the local electrostatic interactions on the chromophore energies. Special attention is given to the contributions of the aromatic side-chain chromophores, and the mechanisms of generation of rotational strengths are analyzed. The sensitivity of the computational models with respect to the structural changes of the protein are discussed. [Figure: see text].

X-ray Crystallographic Analysis of 6-Aminohexanoate-Dimer Hydrolase

6-Aminohexanoate-dimer hydrolase (EII), responsible for the degradation of nylon-6 industry by-products, and its analogous enzyme (EII') that has only approximately 0.5% of the specific activity toward the 6-aminohexanoate-linear dimer, are encoded on plasmid pOAD2 of Arthrobacter sp. (formerly Flavobacterium sp.) KI72. Here, we report the three-dimensional structure of Hyb-24 (a hybrid between the EII and EII' proteins; EII'-level activity) by x-ray crystallography at 1.8 A resolution and refined to an R-factor and R-free of 18.5 and 20.3%, respectively. The fold adopted by the 392-amino acid polypeptide generated a two-domain structure that is similar to the folds of the penicillin-recognizing family of serine-reactive hydrolases, especially to those of d-alanyl-d-alanine-carboxypeptidase from Streptomyces and carboxylesterase from Burkholderia. Enzyme assay using purified enzymes revealed that EII and Hyb-24 possess hydrolytic activity for carboxyl esters with short acyl chains but no detectable activity for d-alanyl-d-alanine. In addition, on the basis of the spatial location and role of amino acid residues constituting the active sites of the nylon oligomer hydrolase, carboxylesterase, d-alanyl-d-alanine-peptidase, and beta-lactamases, we conclude that the nylon oligomer hydrolase utilizes nucleophilic Ser(112) as a common active site both for nylon oligomer-hydrolytic and esterolytic activities. However, it requires at least two additional amino acid residues (Asp(181) and Asn(266)) specific for nylon oligomer-hydrolytic activity. Here, we propose that amino acid replacements in the catalytic cleft of a preexisting esterase with the beta-lactamase fold resulted in the evolution of the nylon oligomer hydrolase.

Effect of backbone cyclization on protein folding stability: chain entropies of both the unfolded and the folded states are restricted

Circular versions of a large number of proteins have been designed by connecting the N and C termini via peptide linkers. A motivation for these designs is the assumed enhancement in folding stability, because backbone cyclization reduces the chain entropy of the unfolded state. Here, it is recognized that backbone cyclization also reduces the chain entropy of a flexible peptide linker in the folded state. Specifically, the end-to-end distance of the linker is restricted to fluctuations around the average displacement between the N and C termini of the folded protein. The balance of the chain-entropy reductions in the folded and unfolded states is used to predict the change in the unfolding free energy, deltadeltaG(cycl), by backbone cyclization. Predicted values of deltadeltaG(cycl) are in quantitative agreement with results of a careful study on cyclizing the 34 residue PIN1 WW domain by linkers with two to seen residues. The experimental results of an optimal linker length l=4 and a maximum stabilization of 1.7 kcal/mol are reproduced. Calculations of deltadeltaG(cycl) for a broad selection of circular proteins suggest that the stabilizing effect of backbone cyclization is modest, reflecting entropy reductions in both the unfolded and the folded states.

Inhibition of beta-lactamases by monocyclic acyl phosph(on)ates

The cyclic acyl phosph(on)ates, 1-hydroxy-5-phenyl-2,6-dioxaphosphorinone(3)-1-oxide, its 4-phenyl isomer, and the phosphonate (2-oxo) analogue of the latter inhibited typical class A (TEM-2) and class C (Enterobacter cloacae P99) beta-lactamases in a time-dependent fashion. No enzyme-catalyzed turnover was detected in any case. The interactions occurring were interpreted in terms of the reaction scheme E + I left arrow over right arrow EI left arrow over right arrow EI', where EI is a reversibly formed noncovalent complex, and EI' is a covalent complex. Reactions of the cyclic phosphates with the P99 beta-lactamase were effectively irreversible, while that of the 4-phenyl cyclic phosphate with the TEM beta-lactamase was slowly reversible. The 4-phenyl cyclic phosphate was generally the most effective inhibitor, both kinetically and thermodynamically, with second-order rate constants of inactivation of both enzymes around 10(4) s(-1) M(-1). This compound also bound noncovalently to both enzymes, with dissociation constants of 25 microM from the P99 enzyme and 100 microM from the TEM. It is unusual to find an inhibitor equally effective against the TEM and P99 enzymes; the beta-lactamase inhibitors currently employed in medical practice (e.g., clavulanic acid) are significantly more effective against class A enzymes. The results of lysinoalanine analysis after hydroxide treatment of the inhibited enzymes and of a (31)P nuclear magnetic resonance spectrum of one such complex were interpreted as favoring a mechanism of inactivation by enzyme acylation rather than phosphylation. Molecular modeling of the enzyme complexes of the 4-phenyl phosphate revealed bound conformations where recyclization and thus reactivation of the enzyme would be difficult. The compounds studied were turned over slowly or not at all by acetylcholinesterase and phosphodiesterase I.

pH, inhibitor, and substrate specificity studies on Escherichia coli penicillin-binding protein 5

The recent structural determination of Escherichia coli penicillin-binding protein 5 (PBP 5) provides the opportunity for detailed structure-function studies of this enzyme. PBP 5 was investigated in terms of its stability, linear reaction kinetics, acyl-donor substrate specificity, inhibition by a number of active site-directed reagents, and pH profile. PBP 5 demonstrated linear reaction kinetics for up to several hours. Dilution of PBP 5 generally resulted in substantial loss of activity, unless BSA or a BSA derivative was added to the diluting buffer. PBP 5 did not demonstrate a significant preference against a simple set of five alpha- and epsilon-substituted L-Lys-D-Ala-D-Ala derivatives, suggesting that PBP 5 lacks specificity for the cross-linked state of cell wall substrates. Among a number of active site-directed reagents, only some thiol-directed reagents gave substantial inhibition. Notably, serine-directed reagents, organic phosphates, and simple boronic acids were ineffective as inhibitors. PBP 5 was stable over the pH range 4.6-12.3, and the k(cat)/K(m) vs. pH profile for activity against Ac(2)-L-Lys-D-Ala-D-Ala was bell-shaped, with pK(a)s at 8.2 and 11.1. This is the first complete pH profile, including both acidic and basic limbs, for a PBP-catalyzed DD-carboxypeptidase (CPase) reaction. Based on its structure, similarity to Class A beta-lactamases, and results from mutagenesis studies, the acidic and basic limbs of the pH profile of PBP 5 are assigned to Lys-47 and Lys-213, respectively. This assignment supports a role for Lys-47 as the general base for acylation and deacylation reactions.

Beta-lactamase protein fragment complementation assays as in vivo and in vitro sensors of protein protein interactions

We have previously described a strategy for detecting protein protein interactions based on protein interaction assisted folding of rationally designed fragments of enzymes. We call this strategy the protein fragment complementation assay (PCA). Here we describe PCAs based on the enzyme TEM-1 beta-lactamase (EC: 3.5.2.6), which include simple colorimetric in vitro assays using the cephalosporin nitrocefin and assays in intact cells using the fluorescent substrate CCF2/AM (ref. 6). Constitutive protein protein interactions of the GCN4 leucine zippers and of apoptotic proteins Bcl2 and Bad, and the homodimerization of Smad3, were tested in an in vitro assay using cell lysates. With the same in vitro assay, we also demonstrate interactions of protein kinase PKB with substrate Bad. The in vitro assay is facile and amenable to high-throughput modes of screening with signal-to-background ratios in the range of 10:1 to 250:1, which is superior to other PCAs developed to date. Furthermore, we show that the in vitro assay can be used for quantitative analysis of a small molecule induced protein interaction, the rapamycin-induced interaction of FKBP and yeast FRB (the FKBP-rapamycin binding domain of TOR (target of rapamycin)). The assay reproduces the known dissociation constant and number of sites for this interaction. The combination of in vitro colorimetric and in vivo fluorescence assays of beta-lactamase in mammalian cells suggests a wide variety of sensitive and high-throughput large-scale applications, including in vitro protein array analysis of protein protein or enzyme protein interactions and in vivo applications such as clonal selection for cells expressing interacting protein partners.

An ultrahigh resolution structure of TEM-1 beta-lactamase suggests a role for Glu166 as the general base in acylation

Although TEM-1 beta-lactamase is among the best studied enzymes, its acylation mechanism remains controversial. To investigate this problem, the structure of TEM-1 in complex with an acylation transition-state analogue was determined at ultrahigh resolution (0.85 A) by X-ray crystallography. The quality of the data was such as to allow for refinement to an R-factor of 9.1% and an R(free) of 11.2%. In the resulting structure, the electron density features were clear enough to differentiate between single and double bonds in carboxylate groups, to identify multiple conformations that are occupied by residues and loops, and to assign 70% of the protons in the protein. Unexpectedly, even at pH 8.0 where the protein was crystallized, the active site residue Glu166 is clearly protonated. This supports the hypothesis that Glu166 is the general base in the acylation half of the reaction cycle. This structure suggests that Glu166 acts through the catalytic water to activate Ser70 for nucleophilic attack on the beta-lactam ring of the substrate. The hydrolytic mechanism of class A beta-lactamases, such as TEM-1, appears to be symmetrical, as are the serine proteases. Apart from its mechanistic implications, this atomic resolution structure affords an unusually detailed view of the structure, dynamics, and hydrogen-bonding networks of TEM-1, which may be useful for the design of inhibitors against this key antibiotic resistance target.

EstB from Burkholderia gladioli: a novel esterase with a beta-lactamase fold reveals steric factors to discriminate between esterolytic and beta-lactam cleaving activity

Esterases form a diverse class of enzymes of largely unknown physiological role. Because many drugs and pesticides carry ester functions, the hydrolysis of such compounds forms at least one potential biological function. Carboxylesterases catalyze the hydrolysis of short chain aliphatic and aromatic carboxylic ester compounds. Esterases, D-alanyl-D-alanine-peptidases (DD-peptidases) and beta-lactamases can be grouped into two distinct classes of hydrolases with different folds and topologically unrelated catalytic residues, the one class comprising of esterases, the other one of beta-lactamases and DD-peptidases. The chemical reactivities of esters and beta-lactams towards hydrolysis are quite similar, which raises the question of which factors prevent esterases from displaying beta-lactamase activity and vice versa. Here we describe the crystal structure of EstB, an esterase isolated from Burkholderia gladioli. It shows the protein to belong to a novel class of esterases with homology to Penicillin binding proteins, notably DD-peptidase and class C beta-lactamases. Site-directed mutagenesis and the crystal structure of the complex with diisopropyl-fluorophosphate suggest Ser75 within the "beta-lactamase" Ser-x-x-Lys motif to act as catalytic nucleophile. Despite its structural homology to beta-lactamases, EstB shows no beta-lactamase activity. Although the nature and arrangement of active-site residues is very similar between EstB and homologous beta-lactamases, there are considerable differences in the shape of the active site tunnel. Modeling studies suggest steric factors to account for the enzyme's selectivity for ester hydrolysis versus beta-lactam cleavage.

Role of protein flexibility in enzymatic catalysis: quantum mechanical-molecular mechanical study of the deacylation reaction in class A beta-lactamases

We present a theoretical study of a mechanism for the hydrolysis of the acyl-enzyme complex formed by a class A beta-lactamase (TEM1) and an antibiotic (penicillanate), as a part of the process of antibiotic's inactivation by this type of enzymes. In the presented mechanism the carboxylate group of a particular residue (Glu166) activates a water molecule, accepting one of its protons, and afterward transfers this proton directly to the acylated serine residue (Ser70). In our study we employed a quantum mechanics (AM1)-molecular mechanics partition scheme (QM/MM) where all the atoms of the system were allowed to relax. For this purpose we used the GRACE procedure in which part of the system is used to define the Hessian matrix while the rest is relaxed at each step of the stationary structures search. By use of this computational scheme, the hydrolysis of the acyl-enzyme is described as a three-step process: The first step corresponds to the proton transfer from the hydrolytic water molecule to the carboxylate group of Glu166 and the subsequent formation of a tetrahedral adduct as a consequence of the attack of this activated water molecule to the carbonyl carbon atom of the beta-lactam. In the second step, the acyl-enzyme bond is broken, obtaining a negatively charged Ser70. In the last step this residue is protonated by means of a direct proton transfer from Glu166. The large mobility of Glu166, a residue that is placed in a Ohms-loop, is essential to facilitate this mechanism. The geometry of the acyl-enzyme complex shows a large distance between Glu166 and Ser70 and thus, if protein coordinates were kept frozen during the reaction path, it would be difficult to get a direct proton transfer between these two residues. This computational study shows how a flexible treatment suggests the feasibility of a mechanism that could have been discounted on the basis of crystallographic positions.