Backbone dynamics of the N-terminal domain of the HIV-1 capsid protein and comparison with the G94D mutant conferring cyclosporin resistance/dependence

Atomic-resolution structure of HIV-1 capsid tubes by magic-angle spinning NMR

HIV-1 capsid plays multiple key roles in viral replication, and inhibition of capsid assembly is an attractive target for therapeutic intervention. Here, we report the atomic-resolution structure of the capsid protein (CA) tubes, determined by magic-angle-spinning NMR and data-guided molecular dynamics simulations. Functionally important regions, including the NTD β-hairpin, the cyclophilin A loop, residues in the hexamer center pore, and the NTD-CTD linker region, are well defined. The structure of individual CA chains, their arrangement in the pseudo-hexameric units of the tube and the inter-hexamer interfaces are consistent with those in intact capsid cores and substantially different from the organization in crystal structures, which featured flat hexamers. The inherent curvature in the CA tubes is controlled by conformational variability of residues in the linker region and of dimer and trimer interfaces. The present structure reveals atomic-level detail into capsid architecture and provides important guidance for the design of novel capsid inhibitors.

HIV Capsid Assembly, Mechanism, and Structure

The HIV genome materials are encaged by a proteinaceous shell called the capsid, constructed from ∼1000-1500 copies of the capsid proteins. Because its stability and integrity are critical to the normal life cycle and infectivity of the virus, the HIV capsid is a promising antiviral drug target. In this paper, we review the studies shaping our understanding of the structure and dynamics of the capsid proteins and various forms of their assemblies, as well as the assembly mechanism.

Major Variations in HIV-1 Capsid Assembly Morphologies Involve Minor Variations in Molecular Structures of Structurally Ordered Protein Segments

We present the results of solid state nuclear magnetic resonance (NMR) experiments on HIV-1 capsid protein (CA) assemblies with three different morphologies, namely wild-type CA (WT-CA) tubes with 35-60 nm diameters, planar sheets formed by the Arg(18)-Leu mutant (R18L-CA), and R18L-CA spheres with 20-100 nm diameters. The experiments are intended to elucidate molecular structural variations that underlie these variations in CA assembly morphology. We find that multidimensional solid state NMR spectra of (15)N,(13)C-labeled CA assemblies are remarkably similar for the three morphologies, with only small differences in (15)N and (13)C chemical shifts, no significant differences in NMR line widths, and few differences in the number of detectable NMR cross-peaks. Thus, the pronounced differences in morphology do not involve major differences in the conformations and identities of structurally ordered protein segments. Instead, morphological variations are attributable to variations in conformational distributions within disordered segments, which do not contribute to the solid state NMR spectra. Variations in solid state NMR signals from certain amino acid side chains are also observed, suggesting differences in the intermolecular dimerization interface between curved and planar CA lattices, as well as possible differences in intramolecular helix-helix packing.

Molecular Architecture of the Retroviral Capsid

Retroviral capsid cores are proteinaceous containers that self-assemble to encase the viral genome and a handful of proteins that promote infection. Their function is to protect and aid in the delivery of viral genes to the nucleus of the host, and, in many cases, infection pathways are influenced by capsid-cellular interactions. From a mathematical perspective, capsid cores are polyhedral cages and, as such, follow well-defined geometric rules. However, marked morphological differences in shapes exist, depending on virus type. Given the specific roles of capsid in the viral life cycle, the availability of detailed molecular structures, particularly at assembly interfaces, opens novel avenues for targeted drug development against these pathogens. Here, we summarize recent advances in the structure and understanding of retroviral capsid, with particular emphasis on assemblies and the capsid cores.

Structural and Molecular Determinants of Membrane Binding by the HIV-1 Matrix Protein

Assembly of HIV-1 particles is initiated by the trafficking of viral Gag polyproteins from the cytoplasm to the plasma membrane, where they co-localize and bud to form immature particles. Membrane targeting is mediated by the N-terminally myristoylated matrix (MA) domain of Gag and is dependent on the plasma membrane marker phosphatidylinositol-4,5-bisphosphate [PI(4,5)P2]. Recent studies revealed that PI(4,5)P2 molecules containing truncated acyl chains [tr-PI(4,5)P2] are capable of binding MA in an "extended lipid" conformation and promoting myristoyl exposure. Here we report that tr-PI(4,5)P2 molecules also readily bind to non-membrane proteins, including HIV-1 capsid, which prompted us to re-examine MA-PI(4,5)P2 interactions using native lipids and membrane mimetic liposomes and bicelles. Liposome binding trends observed using a recently developed NMR approach paralleled results of flotation assays, although the affinities measured under the equilibrium conditions of NMR experiments were significantly higher. Native PI(4,5)P2 enhanced MA binding to liposomes designed to mimic non-raft-like regions of the membrane, suggesting the possibility that binding of the protein to disordered domains may precede Gag association with, or nucleation of, rafts. Studies with bicelles revealed a subset of surface and myr-associated MA residues that are sensitive to native PI(4,5)P2, but cleft residues that interact with the 2'-acyl chains of tr-PI(4,5)P2 molecules in aqueous solution were insensitive to native PI(4,5)P2 in bicelles. Our findings call to question extended-lipid MA:membrane binding models, and instead support a model put forward from coarse-grained simulations indicating that binding is mediated predominantly by dynamic, electrostatic interactions between conserved basic residues of MA and multiple PI(4,5)P2 and phosphatidylserine molecules.

Dynamic allostery governs cyclophilin A-HIV capsid interplay

Host factor protein Cyclophilin A (CypA) regulates HIV-1 viral infectivity through direct interactions with the viral capsid, by an unknown mechanism. CypA can either promote or inhibit viral infection, depending on host cell type and HIV-1 capsid (CA) protein sequence. We have examined the role of conformational dynamics on the nanosecond to millisecond timescale in HIV-1 CA assemblies in the escape from CypA dependence, by magic-angle spinning (MAS) NMR and molecular dynamics (MD). Through the analysis of backbone (1)H-(15)N and (1)H-(13)C dipolar tensors and peak intensities from 3D MAS NMR spectra of wild-type and the A92E and G94D CypA escape mutants, we demonstrate that assembled CA is dynamic, particularly in loop regions. The CypA loop in assembled wild-type CA from two strains exhibits unprecedented mobility on the nanosecond to microsecond timescales, and the experimental NMR dipolar order parameters are in quantitative agreement with those calculated from MD trajectories. Remarkably, the CypA loop dynamics of wild-type CA HXB2 assembly is significantly attenuated upon CypA binding, and the dynamics profiles of the A92E and G94D CypA escape mutants closely resemble that of wild-type CA assembly in complex with CypA. These results suggest that CypA loop dynamics is a determining factor in HIV-1's escape from CypA dependence.

Site-specific structural variations accompanying tubular assembly of the HIV-1 capsid protein

The 231-residue capsid (CA) protein of human immunodeficiency virus type 1 (HIV-1) spontaneously self-assembles into tubes with a hexagonal lattice that is believed to mimic the surface lattice of conical capsid cores within intact virions. We report the results of solid-state nuclear magnetic resonance (NMR) measurements on HIV-1 CA tubes that provide new information regarding changes in molecular structure that accompany CA self-assembly, local dynamics within CA tubes, and possible mechanisms for the generation of lattice curvature. This information is contained in site-specific assignments of signals in two- and three-dimensional solid-state NMR spectra, conformation-dependent (15)N and (13)C NMR chemical shifts, detection of highly dynamic residues under solution NMR conditions, measurements of local variations in transverse spin relaxation rates of amide (1)H nuclei, and quantitative measurements of site-specific (15)N-(15)N dipole-dipole couplings. Our data show that most of the CA sequence is conformationally ordered and relatively rigid in tubular assemblies and that structures of the N-terminal domain (NTD) and the C-terminal domain (CTD) observed in solution are largely retained. However, specific segments, including the N-terminal β-hairpin, the cyclophilin A binding loop, the inter-domain linker, segments involved in intermolecular NTD-CTD interactions, and the C-terminal tail, have substantial static or dynamical disorder in tubular assemblies. Other segments, including the 310-helical segment in CTD, undergo clear conformational changes. Structural variations associated with curvature of the CA lattice appear to be localized in the inter-domain linker and intermolecular NTD-CTD interface, while structural variations within NTD hexamers, around local 3-fold symmetry axes, and in CTD-CTD dimerization interfaces are less significant.

Structural and dynamical characterization of tubular HIV-1 capsid protein assemblies by solid state nuclear magnetic resonance and electron microscopy

The wild-type HIV-1 capsid protein (CA) self-assembles in vitro into tubular structures at high ionic strength. We report solid state nuclear magnetic resonance (NMR) and electron microscopy measurements on these tubular CA assemblies, which are believed to contain a triangular lattice of hexameric CA proteins that is similar or identical to the lattice of capsids in intact HIV-1. Mass-per-length values of CA assemblies determined by dark-field transmission electron microscopy indicate a variety of structures, ranging from single-wall tubes to multiwall tubes that approximate solid rods. Two-dimensional (2D) solid state (13)C--(13)C and (15)N--(13)C NMR spectra of uniformly (15)N,(13)C-labeled CA assemblies are highly congested, as expected for a 25.6 kDa protein in which nearly the entire amino acid sequence is immobilized. Solid state NMR spectra of partially labeled CA assemblies, expressed in 1,3-(13)C(2)-glycerol medium, are better resolved, allowing the identification of individual signals with line widths below 1 ppm. Comparison of crosspeak patterns in the experimental 2D spectra with simulated patterns based on solution NMR chemical shifts of the individual N-terminal (NTD) and C-terminal (CTD) domains indicates that NTD and CTD retain their individual structures upon self-assembly of full-length CA into tubes. 2D (1)H-(13)C NMR spectra of CA assemblies recorded under solution NMR conditions show relatively few signals, primarily from segments that link the alpha-helices of NTD and CTD and from the N- and C-terminal ends. Taken together, the data support the idea that CA assemblies contain a highly ordered 2D protein lattice in which the NTD and CTD structures are retained and largely immobilized.

Solution characterization of the extracellular region of CD147 and its interaction with its enzyme ligand cyclophilin A

The CD147 receptor plays an integral role in numerous diseases by stimulating the expression of several protein families and serving as the receptor for extracellular cyclophilins; however, neither CD147 nor its interactions with its cyclophilin ligands have been well characterized in solution. CD147 is a unique protein in that it can function both at the cell membrane and after being released from cells where it continues to retain activity. Thus, the CD147 receptor functions through at least two mechanisms that include both cyclophilin-independent and cyclophilin-dependent modes of action. In regard to CD147 cyclophilin-independent activity, CD147 homophilic interactions are thought to underlie its activity. In regard to CD147 cyclophilin-dependent activity, cyclophilin/CD147 interactions may represent a novel means of signaling since cyclophilins are also peptidyl–prolyl isomerases. However, direct evidence of catalysis has not been shown within the cyclophilin/CD147 complex. In this report, we have characterized the solution behavior of the two most prevalent CD147 extracellular isoforms through biochemical methods that include gel-filtration and native gel analysis as well as directly through multiple NMR methods. All methods indicate that the extracellular immunoglobulin-like domains are monomeric in solution and, thus, suggest that CD147 homophilic interactions in vivo are mediated through other partners. Additionally, using multiple NMR techniques, we have identified and characterized the cyclophilin target site on CD147 and have shown for the first time that CD147 is also a substrate of its primary cyclophilin enzyme ligand, cyclophilin A.

Structure of the antiviral assembly inhibitor CAP-1 complex with the HIV-1 CA protein

The CA domain of the human immunodeficiency virus type 1 (HIV-1) Gag polyprotein plays critical roles in both the early and late phases of viral replication and is therefore an attractive antiviral target. Compounds with antiviral activity were recently identified that bind to the N-terminal domain of CA (CA N) and inhibit capsid assembly during viral maturation. We have determined the structure of the complex between CA N and the antiviral assembly inhibitor N-(3-chloro-4-methylphenyl)-N'-{2-[({5-[(dimethylamino)-methyl]-2-furyl}-methyl)-sulfanyl]ethyl}-urea) (CAP-1) using a combination of NMR spectroscopy and X-ray crystallography. The protein undergoes a remarkable conformational change upon CAP-1 binding, in which Phe32 is displaced from its buried position in the protein core to open a deep hydrophobic cavity that serves as the ligand binding site. The aromatic ring of CAP-1 inserts into the cavity, with the urea NH groups forming hydrogen bonds with the backbone oxygen of Val59 and the dimethylamonium group interacting with the side-chains of Glu28 and Glu29. Elements that could be exploited to improve binding affinity are apparent in the structure. The displacement of Phe32 by CAP-1 appears to be facilitated by a strained main-chain conformation, which suggests a potential role for a Phe32 conformational switch during normal capsid assembly.

NMR structure of the pseudo-receiver domain of CikA

The circadian input kinase (CikA) is a major element of the pathway that provides environmental information to the circadian clock of the cyanobacterium Synechococcus elongatus. CikA is a polypeptide of 754 residues and has three recognizable domains: GAF, histidine protein kinase, and receiver-like. This latter domain of CikA lacks the conserved phospho-accepting aspartyl residue of bona fide receiver domains and is thus a pseudo-receiver (PsR). Recently, it was shown that the PsR domain (1) attenuates the autokinase activity of CikA, (2) is necessary to localize CikA to the cell pole, and (3) is necessary for the destabilization of CikA in the presence of the quinone analog 2,5-dibromo-3-methyl-6-isopropyl-p-benzoquinone (DBMIB). The solution structure of the PsR domain of CikA, CikAPsR, is presented here. A model of the interaction between the PsR domain and HPK portion of CikA provides a potential explanation for how the PsR domain attenuates the autokinase activity of CikA. Finally, a likely quinone-binding surface on CikAPsR is shown here.

Capsid stability and replication of human immunodeficiency virus type 1 are influenced critically by charge and size of Gag residue 183

Structural data support a model where - following proteolytic cleavage--the amino-terminal domain of human immunodeficiency virus type 1 (HIV-1) capsid protein refolds into a beta-hairpin/helix tertiary structure that is stabilized by a buried salt bridge forming between the positively charged primary imino group of a proline residue and the negatively charged carboxyl group of a conserved aspartate. In order to evaluate the contribution of either side-chain length or charge to the formation of infectious virus capsids, aspartate 183 was substituted for glutamate or asparagine in the viral context. It was found that both modifications abolished infectivity of the corresponding viruses in permissive T lymphocytes, although none of particle assembly and release, RNA encapsidation, incorporation of Env glycoproteins and packaging of cyclophilin A were impaired. However, whereas biophysical analyses of mutant virions yielded wild-type-like particle sizes and densities, electron microscopy revealed aberrant core morphologies that could be attributed to either increased (D183N) or reduced (D183E) capsid stability. Although the two amino acid substitutions had opposing effects upon core stability, both mutants were shown to exhibit a severe block in early reverse transcription, underscoring the importance of correct salt-bridge formation for early steps of virus replication.

A mutation in alpha helix 3 of CA renders human immunodeficiency virus type 1 cyclosporin A resistant and dependent: rescue by a second-site substitution in a distal region of CA

The replication of many isolates of human immunodeficiency virus type 1 (HIV-1) is enhanced by binding of the host cell protein cyclophilin A (CypA) to the viral capsid protein (CA). The immunosuppressive drug cyclosporine A (CsA) and its nonimmunosuppressive analogs bind with high affinity to CypA and inhibit HIV-1 replication. Previous studies have identified two mutations, A92E and G94D, in the CypA-binding loop of CA that confer the ability of HIV-1 to replicate in the presence of CsA. Interestingly, CsA stimulates the replication of HIV-1 mutants containing either the A92E or G94D substitution in some human cell lines. Here, we show that substitution of alanine for threonine at position 54 of CA (T54A) also confers HIV-1 resistance to and dependence on CsA. Like the previously identified CsA-resistant/dependent mutants, infection by the T54A mutant was stimulated by CsA in a target cell-specific manner. RNA interference-mediated reduction of CypA expression enhanced the permissiveness of HeLa cells to infection by the T54A mutant. A suppressor mutation, encoding a substitution of threonine for alanine at position 105 of CA (A105T), was identified through adaptation of the T54A mutant virus for growth in CEM cells. A105T rescued the impaired single-cycle infectivity and replication defects of both T54A and A92E mutants. These results indicate that CA determinants outside the CypA-binding loop can modulate the dependence of HIV-1 infection on CypA.

Structure, dynamics, and membrane topology of stannin: a mediator of neuronal cell apoptosis induced by trimethyltin chloride

Organotin compounds or alkyltins are ubiquitous environmental toxins that have been implicated in cellular death. Unlike other xenobiotic compounds, such as organomercurials and organoleads, alkyltins activate apoptotic cascades at low concentrations. Trimethyltin (TMT) chloride is amongst the most toxic organotin compounds, and is known to selectively inflict injury to specific regions of the brain. Stannin (SNN), an 88-residue mitochondrial membrane protein, has been identified as the specific marker for neuronal cell apoptosis induced by TMT intoxication. This high specificity of TMT makes SNN an ideal model system for understanding the mechanism of organotin neurotoxicity at a molecular level. Here, we report the three-dimensional structure and dynamics of SNN in detergent micelles, and its topological orientation in lipid bilayers as determined by solution and solid-state NMR spectroscopy. We found that SNN is a monotopic membrane protein composed of three domains: a single transmembrane helix (residues 10-33) that transverses the lipid bilayer at approximately a 20 degrees angle with respect to the membrane normal; a 28 residue unstructured linker, which includes a conserved CXC metal-binding motif and a putative 14-3-3zeta binding domain; and a distorted cytoplasmic helix (residues 61-79) that is partially absorbed into the plane of the lipid bilayer with a tilt angle of approximately 80 degrees from the membrane normal. The structure and architecture of SNN within the lipid environment provides insight about how this protein transmits toxic insults caused by TMT across the membrane.

An NMR view of the unfolding process of rusticyanin: Structural elements that maintain the architecture of a beta-barrel metalloprotein

The unfolding process of the blue copper protein rusticyanin (Rc) as well as its dynamic and D(2)O/H(2)O exchange properties in an incipient unfolded state have been studied by heteronuclear NMR spectroscopy. Titrations of apo, Cu(I), and Cu(II)Rc with guanidinium chloride (GdmCl) show that the copper ion stabilizes the folded species and remains bound in the completely unfolded state. The oxidized state of the copper ion is more efficient than the reduced form in this respect. The long loop of Rc (where the first ligand of the copper ion is located) is one of the most mobile domains of the protein. This region has no defined secondary structure elements and is prone to exchange its amide protons. In contrast, the last loop (including a short alpha-helix) and the last beta-strand (where the other three ligands of the metal ion are located) form the most rigid domain of the protein. The results taken as a whole suggest that the first ligand detaches from the metal ion when the protein unfolds, while the other three ligands remain bound to it. The implications of these findings for the biological folding process of Rc are also discussed.

(1)H/(15)N heteronuclear NMR spectroscopy shows four dynamic domains for phospholamban reconstituted in dodecylphosphocholine micelles

We report the backbone dynamics of monomeric phospholamban in dodecylphosphocholine micelles using (1)H/(15)N heteronuclear NMR spectroscopy. Phospholamban is a 52-amino acid membrane protein that regulates Ca-ATPase in cardiac muscle. Phospholamban comprises three structural domains: a transmembrane domain from residues 22 to 52, a connecting loop from 17 to 21, and a cytoplasmic domain from 1 to 16 that is organized in an "L"-shaped structure where the transmembrane and the cytoplasmic domain form an angle of approximately 80 degrees (Zamoon et al., 2003; Mascioni et al., 2002). T(1), T(2), and (1)H/(15)N nuclear Overhauser effect values measured for the amide backbone resonances were interpreted using the model-free approach of Lipari and Szabo. The results point to the existence of four dynamic domains, revealing the overall plasticity of the cytoplasmic helix, the flexible loop, and part of the transmembrane domain (residues 22-30). In addition, using Carr-Purcell-Meiboom-Gill-based experiments, we have characterized phospholamban dynamics in the micros-ms timescale. We found that the majority of the residues in the cytoplasmic domain, the flexible loop, and the first ten residues of the transmembrane domain undergo dynamics in the micros-ms range, whereas minimal dynamics were detected for the transmembrane domain. Hydrogen/deuterium exchange factors measured at different temperatures support the existence of slow motion in both the loop and the cytoplasmic helix. We propose that these dynamic properties are critical factors in the biomolecular recognition of phospholamban by Ca-ATPase and other interacting proteins such as protein kinase A and protein phosphatase 1.

Assembly properties of the human immunodeficiency virus type 1 CA protein

During retroviral maturation, the CA protein oligomerizes to form a closed capsid that surrounds the viral genome. We have previously identified a series of deleterious surface mutations within human immunodeficiency virus type 1 (HIV-1) CA that alter infectivity, replication, and assembly in vivo. For this study, 27 recombinant CA proteins harboring 34 different mutations were tested for the ability to assemble into helical cylinders in vitro. These cylinders are composed of CA hexamers and are structural models for the mature viral capsid. Mutations that diminished CA assembly clustered within helices 1 and 2 in the N-terminal domain of CA and within the crystallographically defined dimer interface in the CA C-terminal domain. These mutations demonstrate the importance of these regions for CA cylinder production and, by analogy, mature capsid assembly. One CA mutant (R18A) assembled into cylinders, cones, and spheres. We suggest that these capsid shapes occur because the R18A mutation alters the frequency at which pentamers are incorporated into the hexagonal lattice. The fact that a single CA protein can simultaneously form all three known retroviral capsid morphologies supports the idea that these structures are organized on similar lattices and differ only in the distribution of 12 pentamers that allow them to close. In further support of this model, we demonstrate that the considerable morphological variation seen for conical HIV-1 capsids can be recapitulated in idealized capsid models by altering the distribution of pentamers.

Backbone (15)N relaxation analysis of the N-terminal domain of the HTLV-I capsid protein and comparison with the capsid protein of HIV-1

Human T-cell leukemia virus type 1 (HTLV-I) is an oncogenic retrovirus that exhibits specific tropism for human T-cells. The capsid (CA) proteins of retroviruses share highly conserved secondary and tertiary structures. However, they can form quaternary structures (assembled cores) that are conical (e.g., the lentivirus subgroup, including HIV) or spherical (e.g., the oncovirus subgroup, including HTLV). The intrinsic features that drive these differences are not understood. So far, only structural studies have been used as a basis for comparison. Dynamics may play a role in particle formation. High-resolution nuclear magnetic resonance (NMR) (15)N relaxation data (T(1), T(1rho), and NOE) have been used to characterize the backbone dynamics of the N-terminal domain (NTD) of the oncovirus HTLV-I and to compare with the CA NTD of HIV-1. Large variations in the (15)N heteronuclear NOEs and transversal relaxation rates for individual residues are consistent with the bundle RMSD of the previously calculated NMR structures. The beta-hairpin and CyP-A loop exhibit different mobility in HTLV-I and HIV-1. The overall hydrodynamic property of the HTLV-I capsid NTD is quite distinct from the HIV-1.

Catalysis of cis/trans isomerization in native HIV-1 capsid by human cyclophilin A

Packaging of cyclophilin A (CypA) into HIV-1 virions is essential for efficient replication; however, the reason for this is unknown. Incorporation is mediated through binding to the Gly-89-Pro-90 peptide bond of the N-terminal domain of HIV-1 capsid (CA(N)). Despite the fact that CypA is a peptidyl-prolyl cis/trans isomerase, catalytic activity on CA(N) has not been observed previously. We show here, using NMR exchange spectroscopy, that CypA does not only bind to CA(N) but also catalyzes efficiently the cis/trans isomerization of the Gly-89-Pro-90 peptide bond. In addition, conformational changes in CA(N) distal to the CypA binding loop are observed on CypA binding and catalysis. The results provide experimental evidence for efficient CypA catalysis on a natively folded and biologically relevant protein substrate.

A unified picture of protein hydration: prediction of hydrodynamic properties from known structures

Hydration is essential for the structural and functional integrity of globular proteins. How much hydration water is required for that integrity? A number of techniques such as X-ray diffraction, nuclear magnetic resonance (NMR) spectroscopy, calorimetry, infrared spectroscopy, and molecular dynamics (MD) simulations indicate that the hydration level is 0.3-0.5 g of water per gram of protein for medium sized proteins. Hydrodynamic properties, when accounted for by modeling proteins as ellipsoids, appear to give a wide range of hydration levels. In this paper we describe an alternative numerical technique for hydrodynamic calculations that takes account of the detailed protein structures. This is made possible by relating hydrodynamic properties (translational and rotational diffusion constants and intrinsic viscosity) to electrostatic properties (capacitance and polarizability). We show that the use of detailed protein structures in predicting hydrodynamic properties leads to hydration levels in agreement with other techniques. A unified picture of protein hydration emerges. There are preferred hydration sites around a protein surface. These sites are occupied nearly all the time, but by different water molecules at different times. Thus, though a given water molecule may have a very short residence time (approximately 100-500 ps from NMR spectroscopy and MD simulations) in a particular site, the site appears fully occupied in experiments in which time-averaged properties are measured.

Structural consequences of cyclophilin A binding on maturational refolding in human immunodeficiency virus type 1 capsid protein

While several cellular proteins are incorporated in the human immunodeficiency virus type 1 virion, cyclophilin (CyP) A is the only one whose absence has been demonstrated to impair infectivity. Incorporation of the cytosolic protein results from interaction with a highly exposed Pro-rich loop in the N-terminal region of the capsid (CA) domain of the precursor polyprotein, Pr55(Gag). Even when prevented from interacting with CyP A, Pr55Gag still forms particles that proceed to mature into morphologically wild-type virions, suggesting that CyP A influences a postassembly event. The nature of this CyP A influence has yet to be elucidated. Here, we show that while CyP A binds both Gag and mature CA proteins, the two binding interactions are actually different. Tryptophan 121 (W121) in CyP A distinguished the two proteins: a phenylalanine substitution (W121F) impaired binding of mature CA protein but not of Gag. This indicates the occurrence of a maturation-dependent switch in the conformation of the Pro-rich loop. A structural consequence of Gag binding to CyP A was to block this maturational refolding, resulting in a 24-kDa CA protein retaining the immature Pro-rich loop conformation. Using trypsin as a structure probe, we demonstrate that the conformation of the C-terminal region in mature CA is also a product of maturational refolding. Binding to wild-type CyP A altered this conformation, as indicated by a reduction in the accessibility of Cys residue(s) in the region to chemical modification. Hence, the end result of binding to CyP A, whether the Pro-rich loop is in the context of Gag or mature CA protein, is a structurally modified mature CA protein. The postassembly role of CyP A may be mediated through these modified mature CA proteins.

Solution structure, backbone dynamics and chitin binding of the anti-fungal protein from Streptomyces tendae TÜ901 1 1Edited by M. F. Summers

AFP1 is a recently discovered anti-fungal, chitin-binding protein from Streptomyces tendae Tü901. Mature AFP1 comprises 86 residues and exhibits limited sequence similarity to the cellulose-binding domains of bacterial cellulases and xylanases. No similarity to the Cys and Gly-rich domains of plant chitin-binding proteins (e.g. agglutinins, lectins, hevein) is observed. AFP1 is the first chitin-binding protein from a bacterium for which anti-fungal activity was shown. Here, we report the three-dimensional solution structure of AFP1, determined by nuclear magnetic resonance spectroscopy. The protein contains two antiparallel beta-sheets (five and four beta-strands each), that pack against each other in a parallel beta-sandwich. This type of architecture is conserved in the functionally related family II of cellulose-binding domains, albeit with different connectivity. A similar fold is also observed in other unrelated proteins (spore coat protein from Myxococcus xanthus, beta-B2 and gamma-B crystallins from Bos taurus, canavalin from Jack bean). AFP1 is therefore classified as a new member of the betagamma-crystallin superfamily. The dynamics of the protein was characterized by NMR using amide 15N relaxation and solvent exchange data. We demonstrate that the protein exhibits an axially symmetric (oblate-like) rotational diffusion tensor whose principal axis coincides to within 15 degrees with that of the inertial tensor. After completion of the present structure of AFP1, an identical fold was reported for a Streptomyces killer toxin-like protein. Based on sequence comparisons and clustering of conserved residues on the protein surface for different cellulose and chitin-binding proteins, we postulate a putative sugar-binding site for AFP1. The inability of the protein to bind short chitin fragments suggests that certain particular architectural features of the solid chitin surface are crucial for the interaction.

Structure and self-association of the Rous sarcoma virus capsid protein

BACKGROUND

The capsid protein (CA) of retroviruses, such as Rous sarcoma virus (RSV), consists of two independently folded domains. CA functions as part of a polyprotein during particle assembly and budding and, in addition, forms a shell encapsidating the genomic RNA in the mature, infectious virus.

RESULTS

The structures of the N- and C-terminal domains of RSV CA have been determined by X-ray crystallography and solution nuclear magnetic resonance (NMR) spectroscopy, respectively. The N-terminal domain comprises seven alpha helices and a short beta hairpin at the N terminus. The N-terminal domain associates through a small, tightly packed, twofold symmetric interface within the crystal, different from those previously described for other retroviral CAs. The C-terminal domain is a compact bundle of four alpha helices, although the last few residues are disordered. In dilute solution, RSV CA is predominantly monomeric. We show, however, using electron microscopy, that intact RSV CA can assemble in vitro to form both tubular structures constructed from toroidal oligomers and planar monolayers. Both modes of assembly occur under similar solution conditions, and both sheets and tubes exhibit long-range order.

CONCLUSIONS

The tertiary structure of CA is conserved across the major retroviral genera, yet sequence variations are sufficient to cause change in associative behavior. CA forms the exterior shell of the viral core in all mature retroviruses. However, the core morphology differs between viruses. Consistent with this observation, we find that the capsid proteins of RSV and human immunodeficiency virus type 1 exhibit different associative behavior in dilute solution and assemble in vitro into different structures.

Solution structure and dynamics of the Rous sarcoma virus capsid protein and comparison with capsid proteins of other retroviruses

The solution structure and dynamics of the recombinant 240 amino acid residue capsid protein from the Rous sarcoma virus has been determined by NMR methods. The structure was determined using 2200 distance restraints and 330 torsion angle restraints, and the dynamics analysis was based on (15)N relaxation parameters (R(1), R(2), and (1)H-(15)N NOE) measured for 153 backbone amide groups. The monomeric protein consists of independently folded N- and C-terminal domains that comprise residues Leu14-Leu146 and Ala150-Gln226, respectively. The domains exhibit different rotational correlation times (16.6(+/-0.1) ns and 12.6(+/-0.1) ns, respectively), are connected by a flexible linker (Ala147-Pro149), and do not give rise to inter-domain NOE values, indicating that they are dynamically independent. Despite limited sequence similarity, the structure of the Rous sarcoma virus capsid protein is similar to the structures determined recently for the capsid proteins of retroviruses belonging to the lentivirus and human T-cell leukemia virus/bovine leukemia virus genera. Structural differences that exist in the C-terminal domain of Rous sarcoma virus capsid relative to the other capsid proteins appear to be related to the occurrence of conserved cysteine residues. Whereas most genera of retroviruses contain a pair of conserved and essential cysteine residues in the C-terminal domain that appear to function by forming an intramolecular disulfide bond during assembly, the Rous sarcoma virus capsid protein does not. Instead, the Rous sarcoma virus capsid protein contains a single cysteine residue that appears to be conserved among the avian C-type retroviruses and is positioned in a manner that might allow the formation of an intermolecular disulfide bond during capsid assembly.