Guanylated Polymethacrylates: A Class of Potent Antimicrobial Polymers with Low Hemolytic Activity

Antimicrobial Guanidinylate Polycarbonates Show Oral In Vivo Efficacy Against Clostridioides Difficile

The emerging antibiotic resistance has been named by the World Health Organization (WHO) as one of the top 10 threats to public health. Notably, methicillin-resistant Staphylococcus aureus (MRSA) and vancomycin-resistant Enterococcus faecalis (VREF) are designated as serious threats, whereas Clostridioides difficile (C. difficile) is recognized as one of the most urgent threats to human health and unmet medical need. Herein, they report the design and application of novel biodegradable polymers - the lipidated antimicrobial guanidinylate polycarbonates. These polymers showed potent antimicrobial activity against a panel of bacteria with fast-killing kinetics and low resistance development tendency, mainly due to their bacterial membrane disruption mechanism. More importantly, the optimal polymer showed excellent antibacterial activity against C. difficile infection (CDI) in vivo via oral administration. In addition, compared with vancomycin, the polymer demonstrated a much-prolonged therapeutic effect and virtually diminished recurrence rate of CDI. The convenient synthesis, easy scale-up, low cost, as well as biodegradability of this class of polycarbonates, together with their in vitro broad-spectrum antimicrobial activity and orally in vivo efficacy against CDI, suggest the great potential of lipidated guandinylate polycarbonates as a new class of antibacterial biomaterials to treat CDI and combat emerging antibiotic resistance.

Engineering Enhanced Antimicrobial Properties in α-Conotoxin RgIA through D-Type Amino Acid Substitution and Incorporation of Lysine and Leucine Residues

Antimicrobial peptides (AMPs), acknowledged as host defense peptides, constitute a category of predominant cationic peptides prevalent in diverse life forms. This study explored the antibacterial activity of α-conotoxin RgIA, and to enhance its stability and efficacy, D-amino acid substitution was employed, resulting in the synthesis of nine RgIA mutant analogs. Results revealed that several modified RgIA mutants displayed inhibitory efficacy against various pathogenic bacteria and fungi, including Candida tropicalis and Escherichia coli. Mechanistic investigations elucidated that these polypeptides achieved antibacterial effects through the disruption of bacterial cell membranes. The study further assessed the designed peptides' hemolytic activity, cytotoxicity, and safety. Mutants with antibacterial activity exhibited lower hemolytic activity and cytotoxicity, with Pep 8 demonstrating favorable safety in mice. RgIA mutants incorporating D-amino acids exhibited notable stability and adaptability, sustaining antibacterial properties across diverse environmental conditions. This research underscores the potential of the peptide to advance innovative oral antibiotics, offering a novel approach to address bacterial infections.

Guanidine dicycloamine-based analogs: green chemistry synthesis, biological investigation, and molecular docking studies as promising antibacterial and antiglycation leads

Dicyandiamide (DCD) reacted with amino acids 1a-f to produce biguanides 2 and 4 and guanidine pyrazolones 3, 5, 6, 7, and 8, according to the reaction. DCD exhibited the following reactions: imidodicarbonimidicdiamide 9, diazocan-2-ylguanidine 10, methyl biguanidylthion 11, N-carbamothioylimidodicarbonimidicdiamide 12, 2-guanidinebenzoimidazole 13a, 2-guanidinylbenzoxazole 13b, and 2-guanidinylbenzothiazol 13c. These reactions were triggered by 6-amino caproic acid, thioacetamide, thiourea, o-aminophenol, o-aminothiophenol, and anthranilic acid, respectively. Compound 2 had the least antimicrobial activity, while compound 13c demonstrated the most antibacterial impact against all bacterial strains. Furthermore, in terms of antiglycation efficacy (AGEs), 12, 11, and 7 were the most effective AGE cross-linking inhibitors. Eight and ten, which showed a considerable inhibition on cross-linking AGEs, come next. Compounds 4 and 6 on the other hand have shown the least suppression of AGE production. The most promising antiglycation scaffolds 8, 11, and 12 in the Human serum albumin (HAS) active site were shown to be able to adopt crucial binding interactions with important amino acids based on the results of in silico molecular docking. The most promising antiglycation compounds 8, 11, and 12 were also shown to have better hydrophilicity, acceptable lipophilicity, gastrointestinal tract absorption (GIT), and blood-brain barrier penetration qualities when their physicochemical properties were examined using the egg-boiled method.

Regulation of Hydrophobic Structures of Antibacterial Guanidinium-Based Amphiphilic Polymers for Subcutaneous Implant Applications

Antimicrobial peptide mimics have been used to kill bacteria and construct antibacterial materials. Precise design and construction of chemical structure are essential for easy access to highly effective antimicrobial peptide mimics. Herein, cationic guanidinium-based polymers (PGXs) with varying hydrophobic structures were synthesized to explore the structure and antibacterial activity relationship of antimicrobial peptide mimics and to construct antibacterial implants. The effect of the hydrophobic chemical structure, including carbon chain length and configuration, on the antimicrobial activities against both Escherichia coli and Staphylococcus aureus was investigated. The antibacterial activities of PGXs improved with increasing alkyl chain length, and PGXs with a straight-chain hydrophobic structure exhibited better bactericidal activities than those with cyclic alkane and aromatic hydrocarbon. Furthermore, PGXs grafted with poly(dimethylsiloxane) (PDMS-PGXs) showed a similar bactericidal change tendency of PGXs in solution. Additionally, the PDMS-PGXs showed potent antibiofilm performance in vitro, which can inhibit bacterial infection in vivo as subcutaneous implants. This study may propose a basis for the precise design and construction of antibacterial materials and provide a promising way of designing biomedical devices and implants with bacterial infection-combating activities.

Ring-opening metathesis polymerization of N-methylpyridinium-fused norbornenes to access antibacterial main-chain cationic polymers

Cationic polymers have been identified as a promising type of antibacterial molecules, whose bioactivity can be tuned through structural modulation. Recent studies suggest that the placement of the cationic groups close to the core of the polymeric architecture rather than on appended side chains might improve both their bioactivity and selectivity for bacterial cells over mammalian cells. However, antibacterial main-chain cationic polymers are typically synthesized via polycondensations, which do not afford precise and uniform molecular design. Therefore, accessing main-chain cationic polymers with high degrees of molecular tunability hinges upon the development of controlled polymerizations tolerating cationic motifs (or cation progenitors) near the propagating species. Herein, we report the synthesis and ring-opening metathesis polymerization (ROMP) of N-methylpyridinium-fused norbornene monomers. The identification of reaction conditions leading to a well-controlled ROMP enabled structural diversification of the main-chain cationic polymers and a study of their bioactivity. This family of polyelectrolytes was found to be active against both Gram-negative (Escherichia coli) and Gram-positive (Methicillin-resistant Staphylococcus aureus) bacteria with minimal inhibitory concentrations as low as 25 µg/mL. Additionally, the molar mass of the polymers was found to impact their hemolytic activity with cationic polymers of smaller degrees of polymerization showing increased selectivity for bacteria over human red blood cells.

Citronellol-Based Long-Lasting Antibacterial Cotton Fabrics without Bacterial Resistance

Antibacterial cotton helps prevent the growth and spread of harmful microorganisms, reduces the risk of infection, and has a prolonged service life by reducing bacterial degradation. However, most antibacterial agents used are toxic to humans and the environment. Citronellol-poly(N,N-dimethyl ethyl methacrylate) (CD), a highly effective antibacterial polymer, is synthesized from natural herbal essential oils (EOs). CD exhibited efficient, rapid bactericidal activity against Gram-positive, Gram-negative, and drug-resistant bacteria. Citronellol's environmental benignity makes CDs less hemolytic. Notably, negligible drug resistance developed after 15 bacterial subcultures. The CD-treated cotton fabric displayed better antibacterial performance than AAA-grade antibacterial fabric, even after repeated washing. This study extends the practical application of EOs to antibacterial surfaces and fabrics, which is promising for use in personal care products and medical settings.

Membrane interaction and selectivity of novel alternating cationic lipid-nanodisc assembling polymers

Synthetic polymer nanodiscs are self-assembled structures formed from amphipathic copolymers encapsulating membrane proteins and surrounding phospholipids into water soluble discs. These nanostructures have served as an analytical tool for the detergent free solubilisation and structural study of membrane proteins (MPs) in their native lipid environment. We established the polymer-lipid nanodisc forming ability of a novel class of amphipathic copolymer comprised of an alternating sequence of N-alkyl functionalised maleimide (AlkylM) of systematically varied hydrocarbon chain length, and cationic N-methyl-4-vinyl pyridinium iodide (MVP). Using a combination of physicochemical techniques, the solubilisation efficiency, size, structure and shape of DMPC lipid containing poly(MVP-co-AlkylM) nanodiscs were determined. Lipid solubilisation increased with AlkylM hydrocarbon chain length from methyl (MM), ethyl (EtM), n-propyl (PM), iso-butyl (IBM) through to n-butyl (BM) maleimide bearing polymers. More hydrophobic derivatives formed smaller sized nanodiscs and lipid ordering within poly(MVP-co-AlkylM) nanodiscs was affected by nanodisc size. In dye-release assays, shorter N-alkyl substituted polymers, particularly poly(MVP-co-EtM), exhibited low activities against eukaryotic mimetic POPC membrane and increased their liposome disruption as POPC : POPG membrane mixtures increased in their anionic POPG component, resembling the charge profile of bacterial membranes. These trends in membrane selectivity were transferred towards native cell systems in which gram-positive Staphylococcus aureus and gram-negative Acenobacter baumannii bacterial strains were relatively susceptible to disruption by hydrophobic n-butyl- and n-propyl-poly(MVP-co-AlkylM) derivatives compared to human red blood cells (HRBCs), with a more pronounced selectivity resulting from poly(MVP-co-PM). Such selective membrane interaction by less hydrophobic polymers provides a framework for polymer design towards applications including selective membrane component solubilisation, biosensing and antimicrobial development.

Size-Controlled Ammonium-Based Homopolymers as Broad-Spectrum Antibacterials

Ammonium group containing polymers possess inherent antimicrobial properties, effectively eliminating or preventing infections caused by harmful microorganisms. Here, homopolymers based on monomers containing ammonium groups were synthesized via Reversible Addition Fragmentation Chain Transfer Polymerization (RAFT) and evaluated as potential antibacterial agents. The antimicrobial activity was evaluated against Gram-positive (M. luteus and B. subtilis) and Gram-negative bacteria (E. coli and S. typhimurium). Three polymers, poly(diallyl dimethyl ammonium chloride), poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride), and poly(vinyl benzyl trimethylammonium chloride), were examined to explore the effect of molecular weight (10 kDa, 20 kDa, and 40 kDa) on their antimicrobial activity and toxicity to mammalian cells. The mechanisms of action of the polymers were investigated with dye-based assays, while Scanning Electron Microscopy (SEM) showed collapsed and fused bacterial morphologies due to the interactions between the polymers and components of the bacterial cell envelope, with some polymers proving to be bactericidal and others bacteriostatic, while being non-hemolytic. Among all the homopolymers, the most active, non-Gram-specific polymer was poly([2-(methacryloyloxy)ethyl]trimethylammonium chloride), with a molecular weight of 40 kDa, with minimum inhibitory concentrations between 16 and 64 µg/mL, showing a bactericidal mode of action mediated by disruption of the cytoplasmic membrane. This homopolymer could be useful in biomedical applications such as surface dressings and in areas such as eye infections.

Amphiphilic Nano-Swords for Direct Penetration and Eradication of Pathogenic Bacterial Biofilms

Bacterial biofilms are major causes of persistent and recurrent infections and implant failures. Biofilms are formable by most clinically important pathogens worldwide, such as Staphylococcus aureus, Pseudomonas aeruginosa, and Escherichia coli, causing recalcitrance to standard antibiotic therapy or anti-biofilm strategies due to amphiphilic impermeable extracellular polymeric substances (EPS) and the presence of resistant and persistent bacteria within the biofilm matrix. Herein, we report our design of an oligoamidine-based amphiphilic "nano-sword" with high structural compacity and rigidity. Its rigid, amphiphilic structure ensures effective penetration into EPS, and the membrane-DNA dual-targeting mechanism exerts strong bactericidal effect on the dormant bacterial persisters within biofilms. The potency of this oligoamidine is shown in two distinct modes of application: it may be used as a coating agent for polycaprolactone to fully inhibit surface biofilm growth in an implant-site mimicking micro-environment; meanwhile, it cures model mice of biofilm infections in various ex vivo and in vivo studies.

Polytrimethylenimines: Highly Potent Antibacterial Agents with Activity and Toxicity Modulated by the Polymer Molecular Weight

Cationic polymers have been extensively investigated as a potential replacement for traditional antibiotics. Here, we examined the effect of molecular weight (MW) on the antimicrobial, cytotoxic, and hemolytic activity of linear polytrimethylenimine (L-PTMI). The results indicate that the biological activity of the polymer sharply increases as MW increases. Thanks to a different position of the antibacterial activity and toxicity thresholds, tuning the MW of PTMI allows one to achieve a therapeutic window between antimicrobial activity and toxicity concentrations. L-PTMI presents significantly higher antimicrobial activity against model microorganisms than linear polyethylenimine (L-PEI) when polymers with a similar number of repeating units are compared. For the derivatives of L-PTMI and L-PEI, obtained through N-monomethylation and partial N,N-dimethylation of linear polyamines, the antimicrobial activity and toxicity were both reduced; however, resulting selectivity indices were higher. Selected materials were tested against clinical isolates of pathogens from the ESKAPE group and Mycobacteria, revealing good antibacterial properties of L-PTMI against antibiotic-resistant strains of Gram-positive and Gram-negative bacteria but limited antibacterial properties against Mycobacteria.

Guanidinium-Perfunctionalized Polyhedral Oligomeric Silsesquioxanes as Highly Potent Antimicrobials against Planktonic Microbes, Biofilms, and Coronavirus

Supramolecules have been drawing increasing attention recently in addressing healthcare challenges caused by infectious pathogens. We herein report a novel class of guanidinium-perfunctionalized polyhedral oligomeric silsesquioxane (Gua-POSS) supramolecules with highly potent antimicrobial activities. The modular structure of Gua-POSS Tm-Cn consists of an inorganic T10 or T8 core (m = 10 or 8), flexible linear linkers of varying lengths (n = 1 or 3), and peripherally aligned cationic guanidinium groups as the membrane-binding units. Such Gua-POSS supramolecules with spherically arrayed guanidinium cations display high antimicrobial potency against Gram-positive (Staphylococcus aureus) and Gram-negative (Escherichia coli) bacteria, as well as fungus (Candida albicans), with the best showing excellently low minimal inhibitory concentrations (MICs) of 1.7-6.8 μM in media, yet with negligible hemolytic activity and low in vitro cytotoxicity to mammalian cells. More significantly, they can inhibit biofilm formation at around their MICs and near-completely break down preestablished difficult-to-break biofilms at 250 μg mL^-1 (∼50 μM). Their strong antiviral efficacy was also experimentally demonstrated against the enveloped murine hepatitis coronavirus as a surrogate of the SARS-CoV species. Overall, this study provides a new design approach to novel classes of sphere-shaped organic-inorganic hybrid supramolecular materials, especially for potent antimicrobial, anti-biofilm, and antiviral applications.

Hydrogels with intrinsic antibacterial activity prepared from naphthyl anthranilamide (NaA) capped peptide mimics

In this study, we prepared antibacterial hydrogels through the self-assembly of naphthyl anthranilamide (NaA) capped amino acid based cationic peptide mimics. These ultra-short cationic peptide mimics were rationally designed with NaA as a capping group, L-phenylalanine, a short aliphatic linker, and a cationic group. The synthesized peptide mimics efficiently formed hydrogels with minimum gel concentrations between 0.1 and 0.3%w/v. The resulting hydrogels exhibited desirable viscoelastic properties which can be tuned by varying the cationic group, electronegative substituent, or counter anion. Importantly, nanofibers from the NaA-capped cationic hydrogels were found to be the source of hydrogels' potent bacteriacidal actvity against both Gram-positive and Gram-negative bacteria while remaining non-cytotoxic. These intrinsically antibacterial hydrogels are ideal candidates for further development in applications where bacterial contamination is problematic.

Biomimetic antimicrobial polymers—Design, characterization, antimicrobial, and novel applications

Biomimetic antimicrobial polymers have been an area of great interest as the need for novel antimicrobial compounds grows due to the development of resistance. These polymers were designed and developed to mimic naturally occurring antimicrobial peptides in both physicochemical composition and mechanism of action. These antimicrobial peptide mimetic polymers have been extensively investigated using chemical, biophysical, microbiological, and computational approaches to gain a deeper understanding of the molecular interactions that drive function. These studies have helped inform SARs, mechanism of action, and general physicochemical factors that influence the activity and properties of antimicrobial polymers. However, there are still lingering questions in this field regarding 3D structural patterning, bioavailability, and applicability to alternative targets. In this review, we present a perspective on the development and characterization of several antimicrobial polymers and discuss novel applications of these molecules emerging in the field. This article is categorized under: Therapeutic Approaches and Drug Discovery > Emerging Technologies Therapeutic Approaches and Drug Discovery > Nanomedicine for Infectious Disease.

Guanidine-Containing Antifungal Agents against Human-Relevant Fungal Pathogens (2004-2022)-A Review

The guanidine moiety is typically a highly basic group, and can be found in a wide variety of drugs, such as zanamivir (Relenza) and metformin (Fortamet), as well as in biologically active compounds for numerous disease areas, including central nervous system (CNS) diseases and chemotherapeutics. This review will focus on antifungal agents which contain at least one guanidine group, for the treatment of human-related fungal pathogens, described in the literature between 2004 and 2022. These compounds include small molecules, steroids, polymers, metal complexes, sesquiterpenes, natural products, and polypeptides. It shall be made clear that a diverse range of guanidine-containing derivatives have been published in the literature and have antifungal activity, including efficacy in in vivo experiments.

Guanylated Hyperbranched Polylysines with High In Vitro and In Vivo Antifungal Activity

With the rapid growth of fungal infections and the emergence of multi-drug resistant (MDR) fungal strains, new antifungals with novel mechanisms are a pressing need to tackle this emerging health problem. Herein it is reported for the first time that hyperbranched polylysine (HPL) shows antifungal activities against Candida, especially for drug-sensitive and MDR C. albicans strains, and broad-spectrum antibacterial activities against both Gram-negative and Gram-positive bacteria. The high antimicrobial activities are ascribed to the high charge density and compact size of the globular structure of HPL. The in vitro antifungal activities of HPL3 are further enhanced by the modification of amine groups to form guanylated polylysines (HPL3-Gxs). Similar to antimicrobial peptides (AMPs), HPLs and HPL3-Gxs interact with and lyse the membranes of microbes, which mitigates the emergence of drug resistance. HPLs and HPL3-Gxs demonstrate excellent in vivo antimicrobial efficacies against both lethal C. albicans challenge in the invasive candidiasis model and lethal Methicillin resistant Staphylococcus aureus challenge in the peritonitis model, and have potentials as broad-spectrum antimicrobials.

Addressing a future pandemic: how can non-biological complex drugs prepare us for antimicrobial resistance threats?

Loss of effective antibiotics through antimicrobial resistance (AMR) is one of the greatest threats to human health. By 2050, the annual death rate resulting from AMR infections is predicted to have climbed from 1.27 million per annum in 2019, up to 10 million per annum. It is therefore imperative to preserve the effectiveness of both existing and future antibiotics, such that they continue to save lives. One way to conserve the use of existing antibiotics and build further contingency against resistant strains is to develop alternatives. Non-biological complex drugs (NBCDs) are an emerging class of therapeutics that show multi-mechanistic antimicrobial activity and hold great promise as next generation antimicrobial agents. We critically outline the focal advancements for each key material class, including antimicrobial polymer materials, carbon nanomaterials, and inorganic nanomaterials, and highlight the potential for the development of antimicrobial resistance against each class. Finally, we outline remaining challenges for their clinical translation, including the need for specific regulatory pathways to be established in order to allow for more efficient clinical approval and adoption of these new technologies.

Effect of Cationic Groups on the Selectivity of Ternary Antimicrobial Polymers

Antimicrobial polymers (AMPs) have emerged as a promising approach to combat multidrug-resistant pathogens. Developed from binary polymers, which contain cationic and hydrophobic groups, ternary polymers are enhanced by adding neutral hydrophilic monomers to improve their biocompatibility. Cationic groups have attracted significant attention owing to their pivotal role in AMPs. Although many studies have investigated the effect of cationic groups on antimicrobial activity of binary AMPs, there is a lack of comprehensive and systematic evaluation for ternary AMPs. Therefore, a library of 31 statistical amphiphilic ternary polymers containing different cationic groups, including primary amine, guanidine and sulfonium groups was prepared to investigate the impact of cationic groups on antimicrobial activity and biocompatibility. We show that the cationic balance appears to be a critical factor influencing polymers' antibacterial activity and selectivity. Our results reveal that the polymers that have the ratio of the cationic groups ranging between 50-60%, coupled with a cationic/hydrophobic ratio in the range of [1.4-2] and an appropriate neutral hydrophilic/hydrophobic balance, exhibited the highest selectivity toward mammalian cells. Furthermore, selectivity can be improved with suitable cationic moieties and good neutral hydrophilic candidates. In the present study, a lysine-mimicking monomer and PEG chain were the best choices for cationic and hydrophilic sources to develop the most selective AMPs, displaying an impressive selectivity for HC₅₀ and IC₅₀ greater than 83 and 21, respectively. This study elucidates a structure-property-performance relationship for ternary AMPs, which contributes to the development of AMPs capable of selectively targeting gram-negative pathogens. This article is protected by copyright. All rights reserved.

Evaluation of the Antimicrobial Activity in Host-Mimicking Media and In Vivo Toxicity of Antimicrobial Polymers as Functional Mimics of AMPs

Activity tests for synthetic antimicrobial compounds are often limited to the minimal inhibitory concentration assay using standard media and bacterial strains. In this study, a family of acrylamide copolymers that act as synthetic mimics of antimicrobial peptides were synthesized and shown to have a disruptive effect on bacterial membranes and structural integrity through microscopy techniques and membrane polarization experiments. The polymers were tested for their antimicrobial properties using media that mimic clinically relevant conditions. Additionally, their activity was compared in two different strains of the Gram-positive bacterium Staphylococcus aureus and the Gram-negative bacterium Pseudomonas aeruginosa. We showed that the medium composition can have an important influence on the polymer activity as there was a considerable reduction in minimal inhibitory concentrations against S. aureus grown in synthetic wound fluid (SWF), and against P. aeruginosa grown in synthetic cystic fibrosis sputum media (SCFM), compared to the concentrations in standard testing media. In contrast, we observed a complete loss of activity against P. aeruginosa in the serum-containing SWF. Finally, we made use of an emerging invertebrate in vivo model, using Galleria mellonella larvae, to assess toxicity of the polymeric antimicrobials, showing a good correlation with cell line toxicity measurements and demonstrating its potential in the evaluation of novel antimicrobial materials.

Synthesis of Quinolones and Zwitterionic Quinolonate Derivatives with Broad-Spectrum Antibiotic Activity

Quinolones are one of the most extensively used therapeutic families of antibiotics. However, the increase in antibiotic-resistant bacteria has rendered many of the available compounds useless. After applying our prediction model of activity against E. coli to a library of 1000 quinolones, two quinolones were selected to be synthesized. Additionally, a series of zwitterionic quinolonates were also synthesized. Quinolones and zwitterionic quinolonates were obtained by coupling the corresponding amine with reagent 1 in acetonitrile. Antibacterial activity was assessed using a microdilution method. All the compounds presented antibacterial activity, especially quinolones 2 and 3, selected by the prediction model, which had broad-spectrum activity. Furthermore, a new type of zwitterionic quinolonate with antibacterial activity was found. These compounds can lead to a new line of antimicrobials, as the structures, and, therefore, their properties, are easily adjustable in the amine in position 4 of the pyridine ring.

Secondary Ammonium-Based Hyperbranched Poly(amidoamine) with Excellent Membrane-Active Property for Multidrug-Resistant Bacterial Infection

With the rapid emergence of microbial infections induced by "superbugs", public health and the global economy are threatened by the lack of effective and biocompatible antibacterial agents. Herein, we systematically design a series of secondary ammonium-based hyperbranched poly(amidoamine) (SAHBP) with different alkyl chain lengths for probing high-efficacy antibacterial agents. SAHBP modified with alkyl tails at the hyperbranched core could efficiently kill Escherichia coli and Staphylococcus aureus, two types of clinically important bacteria worldwide. The best SAHBP with 12-carbon-long alkyl tails (SAHBP-12) also showed high activity against problematic multidrug-resistant bacteria, including Pseudomonas aeruginosa and methicillin-resistant S. aureus (MRSA). Based on ζ potential, isothermal titration microcalorimetry (ITC), and membrane integrity assays, it is found that SAHBP-12 could attach to the cell membrane via electrostatic adsorption and hydrophobic interactions, following which the integrity of the bacterial cell wall and the cell membrane is disrupted, resulting in severe cell membrane damage and the leakage of cytoplasmic contents, finally causing bacterial cell death. Impressively, benefiting from excellent membrane-active property, SAHBP-12 exhibited robust therapeutic efficacy in MRSA-infected mice wounds. Moreover, SAHBP-12 also showed excellent biosafety in vitro and in vivo, which undoubtedly distinguished it as a potent weapon in combating the growing threat of problematic multidrug-resistant bacterial infections.

Cytocompatible Amphipathic Carbon Quantum Dots as Potent Membrane-Active Antibacterial Agents with Low Drug Resistance and Effective Inhibition of Biofilm Formation

It is very challenging to design nanomaterials with both excellent antibacterial activity and cytocompatibility when facing bacterial infection. Here, inspired by antimicrobial peptides (AMPs), we fabricate carbon quantum dots (CQDs) derived from hydrophobic tryptophan and hydrophilic lysine or arginine (Lys/Trp-CQDs and Arg/Trp-CQDs), which possess amphipathic properties. These CQDs could effectively destroy bacterial membranes without developing resistance, inhibit biofilms formed by Staphylococcus aureus, and exhibit good in vitro biocompatibility. The antibacterial activities are caused by not only surface cationic structures and excess intracellular reactive oxygen species (ROS) generated by the CQDs but also the effects of the surface hydrophobic groups. These combined mechanisms of actions lead to bacterial membrane disruption, which raises the hope for combating bacterial infection without concern about drug resistance. What's more, the effect of amphiphilicity on balancing sterilization with biocompatibility expands the research ideas for developing available antibacterial nanomaterials.

Comprehensive Review on the Degradation Chemistry and Toxicity Studies of Functional Materials

In recent decades there has been growing interest of material chemists in the successful development of functional materials for drug delivery, tissue engineering, imaging, diagnosis, theranostic, and other biomedical applications with advanced nanotechnology tools. The efficacy and safety of functional materials are determined by their pharmacological, toxicological, and immunogenic effects. It is essential to consider all degradation pathways of functional materials and to assess plausible intermediates and final products for quality control. This review provides a brief insight into chemical degradation mechanisms of functional materials like oxidation, photodegradation, and physical and enzymatic degradation. The intermediates and products of degradation were confirmed with analytical methods such as proton nuclear magnetic resonance (¹H NMR), gel permeation chromatography (GPC), UV-vis spectroscopy (UV-vis), infrared spectroscopy (IR), differential scanning calorimetry (DSC), mass spectroscopy, and other sophisticated analytical methods. These analytical methods are also used for regulatory, quality control, and stability purposes in industry. The assessment of degradation is important to predetermine the behavior of functional materials in specific storage conditions and can be relevant to their behavior during in vivo applications. Another important aspect is the evaluation of the toxicity of functional materials. Toxicity can be accessed with various methods using in vitro, in vivo, ex vivo, and in silico models. In vitro cell culture methods are used to determine mitochondrial damage, reactive oxygen species, stress responses, and cellular toxicity. In vitro cellular toxicity can be measured by MTT assay, LDH leakage assay, and hemolysis. In vivo studies are performed using various animal models involving zebrafish, rodents (mice and rats), and nonhuman primates. Ex vivo studies are also used for efficacy and toxicity determinations of functional materials like ex vivo potency assay and precision-cut liver slice (PCLS) models. The in silico tools with computational simulations like quantitative structure-activity relationships (QSAR), pharmacokinetics (PK) and pharmacodynamics (PD), dose and time response, and quantitative cationic-activity relationships ((Q)CARs) are used for prediction of the toxicity of functional materials. In this review, we studied the principle methods used for degradation studies, different degradation pathways, and mechanisms of functional material degradation with prototype examples. We discuss toxicity assessments with different toxicity approaches used for estimation of the safety and efficacy of functional materials.

Effects of Hydrophobicity on Antimicrobial Activity, Selectivity, and Functional Mechanism of Guanidinium-Functionalized Polymers

In this study, a series of guanidinium-functionalized polycarbonate random co-polymers is prepared from organocatalytic ring-opening polymerization to investigate the effect of the hydrophobic side chain (ethyl, propyl, isopropyl, benzyl, and hexyl) on their antimicrobial activity and selectivity. Although the polymers exhibit similar minimum inhibitory concentrations, the more hydrophobic polymers exhibit a faster rate of bacteria elimination. At higher percentage content (20 mol%), polymers with more hydrophobic side chains suffer from poor selectivity due to their high hemolytic activity. The highly hydrophobic co-polymer, containing the hydrophobic hexyl-functionalized cyclic carbonate, kills bacteria via a membrane-disruptive mechanism. Micelle formation leads to a lower extent of membrane disruption. This study unravels the effects of hydrophobic side chains on the activities of the polymers and their killing mechanism, providing insights into the design of new antimicrobial polymers.

Antimicrobial Polypeptides Capable of Membrane Translocation for Treatment of MRSA Wound Infection In Vivo

Multidrug resistant infections are plaguing the healthcare sector over the past few decades with limited treatment options. To overcome this problem, the authors synthesize a series of novel guanidinium-functionalized polypeptides. Specifically, poly(l-lysine) (PLL) with different lengths is first synthesized by ring-opening polymerization of N^ε -benzyloxycarbonyl-l-lysine-N-carboxyanhydride (Lys(Z)-NCA) followed by functionalization with a guanidinium-functional group to obtain guanidinium-functionalized PLL (PLL-Gua). To study the effect of hydrophobicity on antimicrobial activity, relatively more hydrophobic leucine-NCA monomer or hydrophobic vitamin E moiety is introduced to PLL-Gua. These polypeptides are characterized for antimicrobial activity against a panel of microbes including multidrug-resistant bacteria, and hemolytic activity. Among all the polypeptides, PLL₂₂ -Gua is most effective against bacteria and yeast. Particularly, excellent bactericidal activity is observed against Staphylococcus aureus and MRSA. PLL₂₂ -Gua kills bacteria mainly by membrane translocation. In addition, PLL₂₂ -Gua kills MRSA with low resistance frequency (<3.3 × 10^-8 ). In an MRSA-caused wound infection mouse model, two-day treatment (twice daily) with 10, 20, or 40 mg per kg of PLL₂₂ -Gua shows up to 99.5% bacterial removal. Moreover, no acute dermal toxicity is observed even at a dose of 200 mg per kg. These promising results show the excellent potential of PLL₂₂ -Gua as an antimicrobial agent against multidrug-resistant infection in vivo.

Antimicrobial Peptides and Macromolecules for Combating Microbial Infections: From Agents to Interfaces

Bacterial resistance caused by the overuse of antibiotics and the shelter of biofilms has evolved into a global health crisis, which drives researchers to continuously explore antimicrobial molecules and strategies to fight against drug-resistant bacteria and biofilm-associated infections. Cationic antimicrobial peptides (AMPs) are considered to be a category of potential alternative for antibiotics owing to their excellent bactericidal potency and lesser likelihood of inducing drug resistance through their distinctive antimicrobial mechanisms. In this review, the hitherto reported plentiful action modes of AMPs are systematically classified into 15 types and three categories (membrane destructive, nondestructive membrane disturbance, and intracellular targeting mechanisms). Besides natural AMPs, cationic polypeptides, synthetic polymers, and biopolymers enable to achieve tunable antimicrobial properties by optimizing their structures. Subsequently, the applications of these cationic antimicrobial agents at the biointerface as contact-active surface coatings and multifunctional wound dressings are also emphasized here. At last, we provide our perspectives on the development of clinically significant cationic antimicrobials and related challenges in the translation of these materials.

Quaternized Amphiphilic Block Copolymers as Antimicrobial Agents

In this study, a novel polystyrene-block-quaternized polyisoprene amphipathic block copolymer (PS-b-PIN) is derived from anionic polymerization. Quaternized polymers are prepared through post-quaternization on a functionalized polymer side chain. Moreover, the antibacterial activity of quaternized polymers without red blood cell (RBCs) hemolysis can be controlled by block composition, side chain length, and polymer morphology. The solvent environment is highly related to the polymer morphology, forming micelles or other structures. The polymersome formation would decrease the hemolysis and increase the electron density or quaternized groups density as previous research and our experiment revealed. Herein, the PS-b-PIN with N,N-dimethyldodecylamine as side chain would form a polymersome structure in the aqueous solution to display the best inhibiting bacterial growth efficiency without hemolytic effect. Therefore, the different single-chain quaternized groups play an important role in the antibacterial action, and act as a controllable factor.

Main-chain flexibility and hydrophobicity of ionenes strongly impact their antimicrobial activity: an extended study on drug resistance strains and Mycobacterium

The spread of antibiotic-resistant pathogens and the resurgence of tuberculosis disease are major motivations to search for novel antimicrobial agents. Some promising candidates in this respect are cationic polymers, also known as synthetic mimics of antimicrobial peptides (SMAMPs), which act through the membrane-lytic mechanism. Development of resistance toward SMAMPs is less likely than toward currently employed antibiotics; however, further studies are needed to better understand their structure–activity relationship. The main objective of this work is to understand the cross-influence of hydrophobicity, main-chain flexibility, and the topology of ionenes (polycations containing a cationic moiety within the main-chain) on activity. To fulfill this goal, a library of ionenes was developed and compared with previously investigated molecules. The obtained compounds display promising activity against the model microorganisms and drug-resistance clinical isolates, including Mycobacterium tuberculosis. The killing efficiency was also investigated, and results confirm a strong effect of hydrophobicity, revealing higher activity for molecules possessing the flexible linker within the polymer main-chain.

A high significance of the main chain flexibility and an unexpected effect of hydrophobicity on the biological activity in series of ionenes was observed. The most potent among the tested polycations showed high activity toward clinical bacterial isolates.

Bioactive Synthetic Polymers

Synthetic polymers are omnipresent in society as textiles and packaging materials, in construction and medicine, among many other important applications. Alternatively, natural polymers play a crucial role in sustaining life and allowing organisms to adapt to their environments by performing key biological functions such as molecular recognition and transmission of genetic information. In general, the synthetic and natural polymer worlds are completely separated due to the inability for synthetic polymers to perform specific biological functions; in some cases, synthetic polymers cause uncontrolled and unwanted biological responses. However, owing to the advancement of synthetic polymerization techniques in recent years, new synthetic polymers have emerged that provide specific biological functions such as targeted molecular recognition of peptides, or present antiviral, anticancer, and antimicrobial activities. In this review, the emergence of this generation of bioactive synthetic polymers and their bioapplications are summarized. Finally, the future opportunities in this area are discussed.

Optimal Balance of Hydrophobic Content and Degree of Polymerization Results in a Potent Membrane-Targeting Antibacterial Polymer

Globally, excessive use of antibiotics has drastically raised the resistance frequency of disease-causing microorganisms among humans, leading to a scarcity of efficient and biocompatible drugs. Antimicrobial polymers have emerged as a promising candidate to combat drug-resistance pathogens. Along with the amphiphilic balance, structural conformation and molecular weight (M _n) play an indispensable role in the antimicrobial potency and cytotoxic activity of polymers. Here, we synthesize cationic and amphiphilic methacrylamide random copolymers using free-radical copolymerization. The mole fraction of the hydrophobic groups is kept constant at approximately 20%, while the molecular weight (average number of linked polymeric units) is varied and the antibacterial and cytotoxic activities are studied. The chemical composition of the copolymers is characterized by ¹H NMR spectroscopy. We observe that the average number of linked units in a polymer chain (i.e., molecular weight) significantly affects the polymer activity and selectivity. The antibacterial efficacy against both of the examined bacteria, Escherichia coli and Staphylococcus aureus, increases with increasing molecular weight. The bactericidal activity of polymers is confirmed by live/dead cell viability assay. Polymers with high molecular weight display high antibacterial activity, yet are highly cytotoxic even at 1 × MIC. However, low-molecular-weight polymers are biocompatible while retaining antibacterial potency. Furthermore, no resistance acquisition is observed against the polymers in E. coli and S. aureus. A comprehensive analysis using confocal and scanning electron microscopy (SEM) techniques shows that the polymers target bacterial membranes, resulting in membrane permeabilization that leads to cell death.

Nanotechnology as a Novel Approach in Combating Microbes Providing an Alternative to Antibiotics

The emergence of infectious diseases promises to be one of the leading mortality factors in the healthcare sector. Although several drugs are available on the market, newly found microorganisms carrying multidrug resistance (MDR) against which existing drugs cannot function effectively, giving rise to escalated antibiotic dosage therapies and the need to develop novel drugs, which require time, money, and manpower. Thus, the exploitation of antimicrobials has led to the production of MDR bacteria, and their prevalence and growth are a major concern. Novel approaches to prevent antimicrobial drug resistance are in practice. Nanotechnology-based innovation provides physicians and patients the opportunity to overcome the crisis of drug resistance. Nanoparticles have promising potential in the healthcare sector. Recently, nanoparticles have been designed to address pathogenic microorganisms. A multitude of processes that can vary with various traits, including size, morphology, electrical charge, and surface coatings, allow researchers to develop novel composite antimicrobial substances for use in different applications performing antimicrobial activities. The antimicrobial activity of inorganic and carbon-based nanoparticles can be applied to various research, medical, and industrial uses in the future and offer a solution to the crisis of antimicrobial resistance to traditional approaches. Metal-based nanoparticles have also been extensively studied for many biomedical applications. In addition to reduced size and selectivity for bacteria, metal-based nanoparticles have proven effective against pathogens listed as a priority, according to the World Health Organization (WHO). Moreover, antimicrobial studies of nanoparticles were carried out not only in vitro but in vivo as well in order to investigate their efficacy. In addition, nanomaterials provide numerous opportunities for infection prevention, diagnosis, treatment, and biofilm control. This study emphasizes the antimicrobial effects of nanoparticles and contrasts nanoparticles' with antibiotics' role in the fight against pathogenic microorganisms. Future prospects revolve around developing new strategies and products to prevent, control, and treat microbial infections in humans and other animals, including viral infections seen in the current pandemic scenarios.

Mechanical, antibacterial, biocompatible and microleakage evaluation of glass ionomer cement modified by nanohydroxyapatite/polyhexamethylene biguanide

This study aims to look for the best concentration of nanohydroxyapatite (NHA) and polyhexamethylene biguanide (PHMB) incorporated into glass ionomer cement (GIC) in accordance with ISO:9917-1 and evaluate its mechanical, antibacterial, biocompatible and microleakages properties. NHA was incorporated into Fuji Ⅱ GIC powder at 0-8.00 wt% concentration and specimens were prepared; the best concentration was sifted out according to ISO9917-1. Based on best NHA proportion, 0-0.80% PHMB was dispersed into powder and samples were respectively prepared. Mechanical properties include net setting time (ST), compressive strength (CS), microhardness (VNH), solubility and scanning electron microscopy (SEM) observation. Those met ISO standard were qualified to continue microleakage observation, antibacterial activity, and biocompatibility test. The results suggested that GIC/6%NHA/0.2% PHMB and GIC/6%NHA/0.4%PHMB showed great performances in mechanical, antibacterial, and microleakage improvements, and the cytotoxicity of modified GIC showed no statistical difference with pure GIC.

Photo-Enhanced Antimicrobial Activity of Polymers Containing an Embedded Photosensitiser

This work presents the synthesis of a novel photosensitive acrylate monomer for use as both a self-catalyst in the photoinduced electron/energy transfer-reversible addition fragmentation chain transfer (PET-RAFT) polymerisation process and a photosensitiser (PS) for antibacterial applications. Hydrophilic, cationic, and antimicrobial formulations are explored to compare the antibacterial effects between charged and non-charged polymers. Covalent attachment of the catalyst to well-defined linear polymer chains has no effect on polymerisation control or singlet oxygen generation. The addition of the PS to polymers provides activity against S. aureus for all polymer formulations, resulting in up to a 99.99999 % killing efficacy in 30 min. Antimicrobial peptide mimetic polymers previously active against P. aeruginosa, but not S. aureus, gain significant bactericidal activity against S. aureus through the inclusion of PS groups, with 99.998 % killing efficiency after 30 min incubation with light. Thus, a broader spectrum of antimicrobial activity is achieved using two distinct mechanisms of bactericidal activity via the incorporation of a photosensitiser monomer into an antimicrobial polymer.

Host Defense Peptide-Mimicking Polymers and Polymeric-Brush-Tethered Host Defense Peptides: Recent Developments, Limitations, and Potential Success

Amphiphilic antimicrobial polymers have attracted considerable interest as structural mimics of host defense peptides (HDPs) that provide a broad spectrum of activity and do not induce bacterial-drug resistance. Likewise, surface engineered polymeric-brush-tethered HDP is considered a promising coating strategy that prevents infections and endows implantable materials and medical devices with antifouling and antibacterial properties. While each strategy takes a different approach, both aim to circumvent limitations of HDPs, enhance physicochemical properties, therapeutic performance, and enable solutions to unmet therapeutic needs. In this review, we discuss the recent advances in each approach, spotlight the fundamental principles, describe current developments with examples, discuss benefits and limitations, and highlight potential success. The review intends to summarize our knowledge in this research area and stimulate further work on antimicrobial polymers and functionalized polymeric biomaterials as strategies to fight infectious diseases.

Macromolecular Nanotherapeutics and Antibiotic Adjuvants to Tackle Bacterial and Fungal Infections

The escalating rise in the population of multidrug-resistant (MDR) pathogens coupled with their biofilm forming ability has struck the global health as nightmare. Alongwith the threat of aforementioned menace, the sluggish development of new antibiotics and the continuous deterioration of the antibiotic pipeline has stimulated the scientific community toward the search of smart and innovative alternatives. In near future, membrane targeting antimicrobial polymers, inspired from antimicrobial peptides, can stand out significantly to combat against the MDR superbugs. Many of these amphiphilic polymers can form nanoaggregates through self-assembly with superior and selective antimicrobial efficacy. Additionally, these macromolecular nanoaggregrates can be utilized to engineer smart antibiotic-delivery system for on-demand drug-release, exploiting the infection site's micoenvironment. This strategy substantially increases the local concentration of antibiotics and reduces the associated off-target toxicity. Furthermore, amphiphilc macromolecules can be utilized to rejuvinate obsolete antibiotics to tackle the drug-resistant infections. This review article highlights the recent developments in macromolecular architecture to design numerous nanostructures with broad-spectrum antimicrobial activity, their application in fabricating smart drug delivery systems and their efficacy as antibiotic adjuvants to circumvent antimicrobial resistance. Finally, the current challenges and future prospects are briefly discussed for further exploration and their practical application in clinical settings.

Amphipathic Barbiturates as Mimics of Antimicrobial Peptides and the Marine Natural Products Eusynstyelamides with Activity against Multi-resistant Clinical Isolates

We report a series of synthetic cationic amphipathic barbiturates inspired by the pharmacophore model of small antimicrobial peptides (AMPs) and the marine antimicrobials eusynstyelamides. These N,N'-dialkylated-5,5-disubstituted barbiturates consist of an achiral barbiturate scaffold with two cationic groups and two lipophilic side chains. Minimum inhibitory concentrations of 2-8 μg/mL were achieved against 30 multi-resistant clinical isolates of Gram-positive and Gram-negative bacteria, including isolates with extended spectrum β-lactamase-carbapenemase production. The guanidine barbiturate 7e (3,5-di-Br) demonstrated promising in vivo antibiotic efficacy in mice infected with clinical isolates of Escherichia coli and Klebsiella pneumoniae using a neutropenic peritonitis model. Mode of action studies showed a strong membrane disrupting effect and was supported by nuclear magnetic resonance and molecular dynamics simulations. The results express how the pharmacophore model of small AMPs and the structure of the marine eusynstyelamides can be used to design highly potent lead peptidomimetics against multi-resistant bacteria.

Approaches for the inhibition and elimination of microbial biofilms using macromolecular agents

Biofilms are complex three-dimensional structures formed at interfaces by the vast majority of bacteria and fungi. These robust communities have an important detrimental impact on a wide range of industries and other facets of our daily lives, yet their removal is challenging owing to the high tolerance of biofilms towards conventional antimicrobial agents. This key issue has driven an urgent search for new innovative antibiofilm materials. Amongst these emerging approaches are highly promising materials that employ aqueous-soluble macromolecules, including peptides, proteins, synthetic polymers, and nanomaterials thereof, which exhibit a range of functionalities that can inhibit biofilm formation or detach and destroy organisms residing within established biofilms. In this Review, we outline the progress made in inhibiting and removing biofilms using macromolecular approaches, including a spotlight on cutting-edge materials that respond to environmental stimuli for "on-demand" antibiofilm activity, as well as synergistic multi-action antibiofilm materials. We also highlight materials that imitate and harness naturally derived species to achieve new and improved biomimetic and biohybrid antibiofilm materials. Finally, we share some speculative insights into possible future directions for this exciting and highly significant field of research.

Synthesis and antiproliferative screening of novel doubly modified colchicines containing urea, thiourea and guanidine moieties

A new series of 10-demethoxy-10-methylaminocolchicines bearing urea, thiourea or aguanidine moieties at position C7 has been designed, synthesized and evaluated for in vitro anticancer activity against different cancer cell lines (A549, MCF-7, LoVo, LoVo/DX). The majority of the new derivatives were active in the nanomolar range and were characterized by lower IC₅₀ values than cisplatin or doxorubicin. Two ureas (4 and 8) and thioureas (19 and 25) were found to be good antiproliferative agents (low IC₅₀ values and high SI) and could prove to be promising candidates for further research in the field of anticancer drugs based on the colchicine skeleton.

Photocross-Linked Antimicrobial Amino-Siloxane Elastomers

Mechanically robust bulk antimicrobial polymers are one way to address disease transmission via contaminated surfaces. Here, we demonstrate the visible light photo-oxidative cross-linking of amine-containing PDMS using a single-component, solvent-free system where amines have a dual role as antimicrobial functionalities and cross-linking sites. Rose Bengal, a xanthene dye used as a fluorescent stain, is thermally reacted with the polymer to give a solvent-free liquid siloxane that can generate reactive singlet oxygen upon aerobic green light irradiation, coupling the amine functionalities into imine cross-links. Photorheological experiments demonstrate that light intensity is the largest kinetic factor in the photo-oxidative curing of these polymers. Room temperature irradiation under an ambient atmosphere results in free-standing elastic materials with mechanical properties that depend on the amount of Rose Bengal present. An ultimate elongation strain of 117% and Young's modulus of 2.15 MPa were observed for the highest dye loading, with both mechanical properties found to be higher than those for the same solution-based dye amounts. We demonstrate that the solvent-free nature of the material can be exploited to generate 3D structures using low-temperature deposition as well as direct-write patterning and photolithography on glass substrates. The antimicrobial activity was investigated, with the cross-linked material demonstrating greater efficacy against E. coli (Gram negative) compared with MRSA (Gram positive) bacterial strains and inducing complete cell lysis of incubated CHO-K1 mammalian cells, demonstrating applicability as a mechanically robust single-component antimicrobial elastomer.

Combination of guanidinium and quaternary ammonium polymers with distinctive antimicrobial mechanisms achieving a synergistic antimicrobial effect

The increasing emergence and spread of antimicrobial resistance are urgent and important global challenges today. The clinical pipeline is lacking in innovative drugs that avoid the development of drug resistance. Macromolecular antimicrobials kill bacteria and fungi through physical disruptions to the cell membrane, which is difficult for microbes to overcome. Recently, we reported antimicrobial polycarbonates that kill microbes via two different mechanisms. Polycarbonates functionalized with quaternary ammonium disrupted the lipid bilayer membrane of the microbes, while polycarbonates functionalized with guanidinium translocated the membrane and precipitated cytosolic components. We hypothesized that the combination of these two distinct mechanisms would result in a more than additive increase in antimicrobial efficacy. Block and random copolymers containing both cationic groups had similar minimum inhibitory concentrations (MICs) as the guanidinium homopolymer on 5 representatives of the ESKAPE pathogens. Interestingly, the random copolymer killed P. aeruginosa and A. baumannii more rapidly than the block copolymer and the guanidinium homopolymer with the same number of guanidinium groups. Like quaternary ammonium homopolymer, the copolymers killed the bacteria via a membrane-disruptive mechanism. Then, we simply mixed quaternary ammonium homopolymer and guanidinium homopolymer, and studied antimicrobial activity of the combination at various concentrations. Checkerboard assay results showed that the combination of the polymers, in general, achieved a synergistic or additive effect in inhibiting the growth of bacteria. At concentrations where it exibited a synergistic or additive effect in inhibiting bacterial growth, the combination killed the bacteria effectively (99%-99.9% killing efficiency) although the individual polymers at these concentrations did not exert bactericidal activity. Therefore, it is essential to have the two functional groups on separate molecules to provide synergism. This study provides a basic understanding of polymer design with different cationic groups.

Synthesis and evaluation of an amphiphilic deferoxamine:gallium-conjugated cationic random copolymer against a murine wound healing infection model of Pseudomonas aeruginosa

Multidrug resistant (MDR) Gram-negative bacteria are an urgent global health threat. We report on the design and evaluation of a xenosiderophore-conjugated cationic random copolymer (pGQ-DG) which exhibits selective antibacterial activity against Pseudomonas aeruginosa (P. aeruginosa) by targeting select outer membrane (OM) receptors for scavenging xenosiderophores such as deferoxamine (DFO), while possessing favorable cytocompatibility and exhibiting low hemolysis, to enhance and safely damage the bacterial OM. pGQ-DG demonstrated synergistic properties in combination with vancomycin (VAN) when evaluated in vitro against P. aeruginosa. In addition, pGQ-DG plus VAN cleared the P. aeruginosa infection and efficiently accelerated healing in a murine wound healing model as effectively as colistin, suggesting that this strategy could serve as an alternative to colistin against MDR bacteria. STATEMENT OF SIGNIFICANCE: P. aeruginosa exhibits intrinsic antibiotic resistance due to limited permeability of its outer membrane (OM). A triple combination antipseudomonal approach was investigated by 1) selectively targeting P. aeruginosa through the complex DFO:gallium, 2) disrupting the OM through a cationic random copolymer, and 3) enhancing bacteria sensitivity to VAN as a result of the OM disruption. Synthesis and characterization of the lead polymer pGQ-DG, mechanism of action, antimicrobial activity, and biocompatibility were investigated in vitro and in vivo. Overall pGQ-DG plus VAN cleared the P. aeruginosa infection and accelerated wound healing in mice as effectively as colistin, suggesting that this strategy could serve as an alternative to colistin against multidrug resistant P. aeruginosa.

Recent Innovations in Bacterial Infection Detection and Treatment

Bacterial infections are a major threat to human health, exacerbated by increasing antibiotic resistance. These infections can result in tremendous morbidity and mortality, emphasizing the need to identify and treat pathogenic bacteria quickly and effectively. Recent developments in detection methods have focused on electrochemical, optical, and mass-based biosensors. Advances in these systems include implementing multifunctional materials, microfluidic sampling, and portable data-processing to improve sensitivity, specificity, and ease of operation. Concurrently, advances in antibacterial treatment have largely focused on targeted and responsive delivery for both antibiotics and antibiotic alternatives. Antibiotic alternatives described here include repurposed drugs, antimicrobial peptides and polymers, nucleic acids, small molecules, living systems, and bacteriophages. Finally, closed-loop therapies are combining advances in the fields of both detection and treatment. This review provides a comprehensive summary of the current trends in detection and treatment systems for bacterial infections.

Binding loop of sunflower trypsin inhibitor 1 serves as a design motif for proteolysis-resistant antimicrobial peptides

Although antimicrobial peptides (AMPs) have become powerful drug candidates in the post-antibiotic era, but their low protease stability hinders their clinical application. In the present study, the natural sunflower trypsin inhibitor 1 (SFTI-1) binding loop (CTKSIPPIC) was used to design and synthesize a specific anti-proteolytic sequence template ((RX)_n W (RX)_n CTKSIPPIC (n = 2, 3; X represents A, I, L, V, F, and W)). After several antibacterial, bactericidal, and toxicity tests, RV3 stood out from the variants and had the highest average selectivity index (SI _all = 156.03). It is highly stable in serum, varying pH, temperature, and salt ions as well as under high trypsin, pepsin, or papain concentrations. In a mouse skin inflammation model, established by Pseudomonas aeruginosa infection, RV3 could effectively kill the pathogen, promote wound healing, inhibit inflammatory cell infiltration, and inhibit mRNA and protein expression of TNF-α, IL-6, and IL-1β inflammatory factors. The antibacterial mechanisms of RV3 include combining with lipopolysaccharides and increasing cell membrane permeability, leading to cell membrane rupture and death. These findings indicate that RV3 has great potential for the treatment of bacterial infections.

Methacrylamide based antibiotic polymers with no detectable bacterial resistance

The growing number of multidrug-resistant pathogens is a major healthcare concern. In search of alternatives to antibiotics, synthetic mimics of antimicrobial peptides (SMAMPs) in the form of antimicrobial polymers have gained tremendous attention. Here, we report the synthesis of a set of 7 amphiphilic water-soluble cationic copolymers using aminopropyl methacrylamide and benzyl methacrylamide repeat units that show significant antibacterial activity. The antibacterial activity was evaluated using a broth microdilution assay against S. aureus and E. coli, while toxicity to mammalian cells was quantified by hemolysis assay with human red blood cells (RBCs). We find that the antibacterial activity and selectivity of the polymers depends on the mole fraction of aromatic benzyl units (f_benzyl) and the average molecular weight (M_n). Polymers with f_benzyl of 0.10 and 0.19, named AB-10 and AB-19 respectively, exhibited the highest antibacterial efficacy without inducing hemolysis and were chosen for further study. Liposome dye leakage study and observations from confocal and scanning electron microscopy indicate that the AB polymers killed bacterial cells primarily by disrupting the cytoplasmic membrane. No resistant mutants of E. coli and S. aureus were obtained with AB-19 in a 30 day serial passage study.

Microbial Interkingdom Biofilms and the Quest for Novel Therapeutic Strategies

Fungal and bacterial species interact with each other within polymicrobial biofilm communities in various niches of the human body. Interactions between these species can greatly affect human health and disease. Diseases caused by polymicrobial biofilms pose a major challenge in clinical settings because of their enhanced virulence and increased drug tolerance. Therefore, different approaches are being explored to treat fungal-bacterial biofilm infections. This review focuses on the main mechanisms involved in polymicrobial drug tolerance and the implications of the polymicrobial nature for the therapeutic treatment by highlighting clinically relevant fungal-bacterial interactions. Furthermore, innovative treatment strategies which specifically target polymicrobial biofilms are discussed.

Thymine-modified chitosan with broad-spectrum antimicrobial activities for wound healing

Avoiding wound infections is a major challenge in wound care management, and new materials are urgently needed to address these problems. Herein, four water-soluble thymine-modified chitosan (TC) derivatives with the degree of substitution (DS) ranging from 0.23 to 0.62 were synthesized and freeze-dried to obtain porous sponge dressings. TC derivatives had broad-spectrum antibacterial activities against gram-negative bacteria, gram-positive bacteria, fungi, drug-resistance bacteria, Pseudomonas aeruginosa and Acinetobacter baumannii. Especially, the antioxidant and antibacterial properties of TC derivatives increased with increasing DS. Furthermore, TC derivatives showed excellent biocompatibility and blood compatibility. TC sponges could significantly accelerate the wound healing process than gauze and chitosan sponge. The histological analysis and immunohistochemical staining showed that the wounds treated with TC sponges displayed fewer inflammatory cells, and faster regeneration of epithelial tissue, collagen deposition and new blood vessel formation speed. Therefore, TC sponges can shed new light for wound dressing design.