On the Role of Single Regiodefects and Polydispersity in Regioregular Poly(3-hexylthiophene): Defect Distribution, Synthesis of Defect-Free Chains, and a Simple Model for the Determination of Crystallinity

Open-flask, ambient temperature direct arylation synthesis of mixed ionic-electronic conductors

Conjugated polymers are widely studied for application areas ranging from energy technology to wearable electronics and bioelectronics. To develop a truly sustainable technology, environmentally benign synthesis is essential. Here, the open-flask synthesis of a multitude of conjugated polymers at room temperature by ambient direct arylation polymerization (ADAP) is demonstrated. The batch synthesis of over 100 grams of polymer in a green solvent and continuous droplet flow synthesis without any solid support is described. Polymers prepared by ADAP are characterized by improved structural order compared to materials prepared by other methods. Hence, organic electrochemical transistors (OECTs) feature beyond state-of-the-art electrical properties, i.e., an OECT hole mobility μ as high as 6 cm2 V-1 s-1, a volumetric capacitance C* over 200 F cm-3, and thus a figure of merit [μC*] exceeding 1100 F cm-1 V-1 s-1. Thus, ADAP paves the way for the benign and large-scale production of high-performance conjugated polymers.

Kumada-Tamao Catalyst-Transfer Condensation Polymerization of AB2 Monomer: Synthesis of Well-Defined Hyperbranched Poly(thienylene-phenylene)

The synthesis of well-defined hyperbranched aromatic polymer by Kumada-Tamao catalyst-transfer condensation polymerization of AB2 monomer is investigated. Grignard monomer 2 is generated by treatment of 2-(3,5-dibromophenyl)-3-hexyl-5-iodothiophene (1) with 1.0 equivalent of isopropylmagnesium chloride in THF at 0 °C for 1 h and subsequently polymerized with Ni(dppe)Cl2 at room temperature for 1 h. The molecular weight of the obtained polymer increases linearly up to ≈30 000 in proportion to the ratio of [consumed 2] /[Ni(dppe)Cl2]0 and in proportion to the conversion of 2, while a narrow molecular weight distribution is maintained (Mw/Mn ≤ 1.12). The matrix-assisted laser desorption/ionization time-of-flight (MALDI-TOF) mass spectrum shows almost a single series of peaks due to polymer with hydrogen at one end and bromine at the other, as in the case of Kumada-Tamao catalyst transfer condensation polymerization of AB monomers. The degree of branching (DB) of the obtained polymers is 0.70-0.75, irrespective of the degree of polymerization. These results indicate that the polymerization of 2 proceeds in a chain-growth polymerization manner through the intramolecular catalyst transfer mechanism, affording hyperbranched polymer with higher DB than the theoretical DB value of 0.5 in conventional polycondensation of AB2 monomers.

Defect Crystal Formation and Thermal-Induced Structural Ordering of Semicrystalline Copolymers Induced by Comonomer Inclusion/Exclusion

Comonomer defects can induce semicrystalline polymers to form unique crystalline structures (e.g., defect crystals), which can greatly influence the materials' physical properties. However, the formation mechanism and structural evolution of defect polymer crystals are not yet well understood. Herein, we chose the poly(l-lactic acid) (PLA) containing glycolic acid (GA) units as the model defect-containing polymer and investigated its crystallization structure and phase transition. The presence of GA units reduces the crystallizability of PLA and leads to the formation of unique defect crystals with enlarged unit cell size. The formation of defect crystals is favored at a low crystallization temperature or high content of GA units due to the inclusion of more comonomer defects. The defect crystals are metastable and undergo structural ordering to form thermally stable α-crystals upon heating and high-temperature annealing, as governed by the exclusion of comonomer defects. This work sheds light on the crystallization and phase transition of defect-containing polymers.

Nanostructure-Dependent Electrical Conductivity Model Within the Framework of the Generalized Effective Medium Theory Applied to Poly(3-hexyl)thiophene Thin Films

One of the key parameters characterizing the microstructure of a layer is its degree of order. It can be determined from optical studies or X-ray diffraction. However, both of these methods applied to the same layer may give different results because, for example, aggregates may contribute to the amorphous background in XRD studies, while in optical studies, they may already show order. Because we are usually interested in the optical and/or electrical properties of the layers, which in turn are closely related to their dielectric properties, determining the optical order of the layers is particularly important. In this work, the microstructure, optical properties and electrical conductivity of poly(3-hexyl)thiophene layers were investigated, and a model describing the electrical conductivity of these layers was proposed. The model is based on the generalized theory of the effective medium and uses the equation from the percolation theory of electrical conductivity for the effective medium of a mixture of two materials. The results indicate a key role of the aggregate size and limited conductivity of charge carriers, mainly due to structural imperfections that manifest themselves as an increase in the number of localized states visible in the subgap absorption near the optical absorption edge. The critical value of the order parameter and the corresponding values of the Urbach energy, excitonic linewidth and band gap energy are determined.

Molecular-Scale Imaging Enables Direct Visualization of Molecular Defects and Chain Structure of Conjugated Polymers

Conjugated polymers have become materials of choice for applications ranging from flexible optoelectronics to neuromorphic computing, but their polydispersity and tendency to aggregate pose severe challenges to their precise characterization. Here, the combination of vacuum electrospray deposition (ESD) with scanning tunneling microscopy (STM) is used to acquire, within the same experiment, assembly patterns, full mass distributions, exact sequencing, and quantification of polymerization defects. In a first step, the ESD-STM results are successfully benchmarked against NMR for low molecular mass polymers, where this technique is still applicable. Then, it is shown that ESD-STM is capable of reaching beyond its limits by characterizing, with the same accuracy, samples that are inaccessible to NMR. Finally, a recalibration procedure is proposed for size exclusion chromatography (SEC) mass distributions, using ESD-STM results as a reference. The distinctiveness of the molecular-scale information obtained by ESD-STM highlights its role as a crucial technique for the characterization of conjugated polymers.

Tandem Kumada-Tamao catalyst-transfer condensation polymerization and Suzuki-Miyaura coupling for the synthesis of end-functionalized poly(3-hexylthiophene)

Successive Kumada-Tamao catalyst-transfer condensation polymerization of 2-bromo-5-chloromagnesio-3-hexylthiophene and Suzuki-Miyaura end-functionalization with pinacol arylboronate in one pot afforded poly(3-hexylthiophene) (P3HT) with a base-sensitive functional group at both ends. The use of poly(methyl methacrylate) (PMMA) bearing a boronic acid ester moiety at one end enabled one-pot synthesis of PMMA-b-P3HT-b-PMMA triblock copolymer.

Spark Discharge Doping-Achieving Unprecedented Control over Aggregate Fraction and Backbone Ordering in Poly(3-hexylthiophene) Solutions

The properties of semiconducting polymers are strongly influenced by their aggregation behavior, that is, their aggregate fraction and backbone planarity. However, tuning these properties, particularly the backbone planarity, is challenging. This work introduces a novel solution treatment to precisely control the aggregation of semiconducting polymers, namely current-induced doping (CID). It utilizes spark discharges between two electrodes immersed in a polymer solution to create strong electrical currents resulting in temporary doping of the polymer. Rapid doping-induced aggregation occurs upon every treatment step for the semiconducting model-polymer poly(3-hexylthiophene). Therefore, the aggregate fraction in solution can be precisely tuned up to a maximum value determined by the solubility of the doped state. A qualitative model for the dependences of the achievable aggregate fraction on the CID treatment strength and various solution parameters is presented. Moreover, the CID treatment can yield an extraordinarily high quality of backbone order and planarization, expressed in UV-vis absorption spectroscopy and differential scanning calorimetry measurements. Depending on the selected parameters, an arbitrarily lower backbone order can be chosen using the CID treatment, allowing for maximum control of aggregation. This method may become an elegant pathway to finely tune aggregation and solid-state morphology for thin-films of semiconducting polymers.

Palladium Mediated Synthesis of Protein-Polyarene Conjugates

Catalyst transfer polymerization (CTP) is widely applied to the synthesis of well-defined π-conjugated polymers. Unlike other polymerization reactions that can be performed in water (e.g., controlled radical polymerizations and ring-opening polymerizations), CTP has yet to be adapted for the modification of biopolymers. Here, we report the use of protein-palladium oxidative addition complexes (OACs) that enable catalyst transfer polymerization to furnish protein-polyarene conjugates. These polymerizations occur with electron-deficient monomers in aqueous buffers open to air at mild (≤37 °C) temperatures with full conversion of the protein OAC and an average polymer length of nine repeating units. Proteins with polyarene chains terminated with palladium OACs can be readily isolated. Direct evidence of protein-polyarene OAC formation was obtained using mass spectrometry, and all protein-polyarene chain ends were uniformly functionalized via C-S arylation to terminate the polymerization with a small molecule thiol or a cysteine-containing protein.

Low-Energy-Consumption and Electret-Free Photosynaptic Transistor Utilizing Poly(3-hexylthiophene)-Based Conjugated Block Copolymers

Neuromorphic computation possesses the advantages of self-learning, highly parallel computation, and low energy consumption, and is of great promise to overcome the bottleneck of von Neumann computation. In this work, a series of poly(3-hexylthiophene) (P3HT)-based block copolymers (BCPs) with different coil segments, including polystyrene, poly(2-vinylpyridine) (P2VP), poly(2-vinylnaphthalene), and poly(butyl acrylate), are utilized in photosynaptic transistor to emulate paired-pulse facilitation, spike time/rate-dependent plasticity, short/long-term neuroplasticity, and learning-forgetting-relearning processes. P3HT serves as a carrier transport channel and a photogate, while the insulating coils with electrophilic groups are for charge trapping and preservation. Three main factors are unveiled to govern the properties of these P3HT-based BCPs: i) rigidity of the insulating coil, ii) energy levels between the constituent polymers, and iii) electrophilicity of the insulating coil. Accordingly, P3HT-b-P2VP-based photosynaptic transistor with a sought-after BCP combination demonstrates long-term memory behavior with current contrast up to 105 , short-term memory behavior with high paired-pulse facilitation ratio of 1.38, and an ultralow energy consumption of 0.56 fJ at an operating voltage of -0.0003 V. As far as it is known, this is the first work to utilize conjugated BCPs in an electret-free photosynaptic transistor showing great potential to the artificial intelligence technology.

Statistical Copolymers of Thiophene-3-Carboxylates and Selenophene-3-Carboxylates; 77Se NMR as a Tool to Examine Copolymer Sequence in Selenophene-Based Conjugated Polymers

Herein, we demonstrate that homopolymerization and statistical copolymerization of 2-ethylhexyl thiophene-3-carboxylate and 2-ethylhexyl selenophene-3-carboxylate monomers is possible via Suzuki-Miyaura cross-coupling. A commercially available palladium catalyst ([1,3-bis(2,6-di-3-pentylphenyl)imidazol-2-ylidene](3-chloropyridyl)dichloropalladium(II) or PEPPSI-IPent) was employed...

n-Type organic semiconducting polymers: stability limitations, design considerations and applications

This review outlines the design strategies which aim to develop high performing n-type materials in the fields of organic thin film transistors (OTFT), organic electrochemical transistors (OECT) and organic thermoelectrics (OTE). Figures of merit for each application and the limitations in obtaining these are set out, and the challenges with achieving consistent and comparable measurements are addressed. We present a thorough discussion of the limitations of n-type materials, particularly their ambient operational instability, and suggest synthetic methods to overcome these. This instability originates from the oxidation of the negative polaron of the organic semiconductor (OSC) by water and oxygen, the potentials of which commonly fall within the electrochemical window of n-type OSCs, and consequently require a LUMO level deeper than ∼-4 eV for a material with ambient stability. Recent high performing n-type materials are detailed for each application and their design principles are discussed to explain how synthetic modifications can enhance performance. This can be achieved through a number of strategies, including utilising an electron deficient acceptor-acceptor backbone repeat unit motif, introducing electron-withdrawing groups or heteroatoms, rigidification and planarisation of the polymer backbone and through increasing the conjugation length. By studying the fundamental synthetic design principles which have been employed to date, this review highlights a path to the development of promising polymers for n-type OSC applications in the future.

Pairing Suzuki–Miyaura cross-coupling and catalyst transfer polymerization

Borylation strategies to make AB Suzuki–Miyaura monomers for use in catalyst-transfer polymerization with nickel or palladium catalysts.

Multiscale modelling of charge transport in P3HT:DIPBI bulk heterojunction organic solar cells

Charge transport properties of a P3HT:DIPBI bulk heterojunction solar cell are modelled by kinetic Monte Carlo simulations based on a morphology obtained from coarse-grained molecular dynamics. Different methods for calculating the hopping integrals entering the charge transfer rates are compared and calibrated for hole transport in amorphous P3HT. The influence of intermolecular and intramolecular charge transfer on the total charge carrier mobility and hence the power conversion efficiency is investigated in detail. An analysis of the most probable pathways with low resistance for hole transport is performed, establishing a connection between charge mobility and morphology.

Design, synthesis, and properties of a six-membered oligofuran macrocycle

In this report, the synthesis and properties of an ester-functionalized macrocyclic sexifuran (C6FE) are presented.

The Importance of Excellent π-π Interactions in Poly(thiophene)s To Reach a High Third-Order Nonlinear Optical Response

Poly(thiophene)s have an inherently large third-order nonlinear optical (TONO) response, but applications are not straightforward due to unoptimized materials. Therefore, several structure-property relationships (molar mass, branching, regioregularity) are investigated to unravel which structural modifications give the highest TONO response. Poly(3-hexylthiophene) with different molar masses, poly[3-(2-ethylhexyl)thiophene] with different molar masses, and random copolymers with different degrees of regioregularity are synthesized and measured by UV-vis spectroscopy and the third harmonic scattering technique. Every structural modification that leads to an increase in π-π interactions in poly(thiophene)s leads to an increase in the TONO response of the material. Therefore, a material with a high molar mass, an unbranched alkyl side chain, and a high regioregularity degree is preferably tested as a promising TONO material.

Generalizable Framework for Algorithmic Interpretation of Thin Film Morphologies in Scanning Probe Images

We describe an open-source and widely adaptable Python library that recognizes morphological features and domains in images collected via scanning probe microscopy. π-Conjugated polymers (CPs) are ideal for evaluating the Materials Morphology Python (m2py) library because of their wide range of morphologies and feature sizes. Using thin films of nanostructured CPs, we demonstrate the functionality of a general m2py workflow. We apply numerical methods to enhance the signals collected by the scanning probe, followed by Principal Component Analysis (PCA) to reduce the dimensionality of the data. Then, a Gaussian Mixture Model segments every pixel in the image into phases, which have similar material-property signals. Finally, the phase-labeled pixels are grouped and labeled as morphological domains using either connected components labeling or persistence watershed segmentation. These tools are adaptable to any scanning probe measurement, so the labels that m2py generates will allow researchers to individually address and analyze the identified domains in the image. This level of control, allows one to describe the morphology of the system using quantitative and statistical descriptors such as the size, distribution, and shape of the domains. Such descriptors will enable researchers to quantitatively track and compare differences within and between samples.

Poly(3-alkylthiophene)- block-poly(3-alkylselenophene)s: Conjugated Diblock Co-polymers with Atypical Self-Assembly Behavior

Understanding self-assembly behavior and resulting morphologies in block co-polymer films is an essential aspect of chemistry and materials science. Although the self-assembly of amorphous coil-coil block co-polymers is relatively well understood, that of semicrystalline block co-polymers where each block has distinct crystallization properties remains unclear. Here, we report a detailed study to elucidate the rich self-assembly behavior of conjugated thiophene-selenophene (P3AT- b-P3AS) block co-polymers. Using a combination of microscopy and synchrotron-based X-ray techniques, we show that three different film morphologies, denoted as lamellae, co-crystallized fibers, and patchy fibers, arise from the self-assembly of these block co-polymers over a relatively narrow range of overall degrees of polymerization (30 < N < 90). Crystallization-driven phase separation occurs at a very low N (<35), and lamellar films are formed. Conversely, at medium N (50-60) and high N (>80), the thiophene and selenophene blocks co-crystallize into nanofibers, where medium N leads to much more mixing than high N. The overall tendency for phase separation in these systems follows rather different trends than phase separation in amorphous polymers in that we observe the greatest degree of phase separation at the lowest N. Finally, we demonstrate how each morphology influences transport properties in organic thin-film transistors comprised of these conjugated polymers.

Synthesis and crystallization behavior of regioregular-block-regiorandom poly(3-hexylthiophene) copolymers

Regioregular–regiorandom poly(3-hexylthiophene) copolymers, synthesized by chain-transfer polycondensation, show strong crystallinity due to their one-sided distribution of regiodefects.

Direct observation of backbone planarization via side-chain alignment in single bulky-substituted polythiophenes

The backbone conformation of conjugated polymers affects, to a large extent, their optical and electronic properties. The usually flexible substituents provide solubility and influence the packing behavior of conjugated polymers in films or in bad solvents. However, the role of the side chains in determining and potentially controlling the backbone conformation, and thus the optical and electronic properties on the single polymer level, is currently under debate. Here, we investigate directly the impact of the side chains by studying the bulky-substituted poly(3-(2,5-dioctylphenyl)thiophene) (PDOPT) and the common poly(3-hexylthiophene) (P3HT), both with a defined molecular weight and high regioregularity, using low-temperature single-chain photoluminescence (PL) spectroscopy and quantum-classical simulations. Surprisingly, the optical transition energy of PDOPT is significantly (∼2,000 cm-1 or 0.25 eV) red-shifted relative to P3HT despite a higher static and dynamic disorder in the former. We ascribe this red shift to a side-chain induced backbone planarization in PDOPT, supported by temperature-dependent ensemble PL spectroscopy. Our atomistic simulations reveal that the bulkier 2,5-dioctylphenyl side chains of PDOPT adopt a clear secondary helical structural motif and thus protect conjugation, i.e., enforce backbone planarity, whereas, for P3HT, this is not the case. These different degrees of planarity in both thiophenes do not result in different conjugation lengths, which we found to be similar. It is rather the stronger electronic coupling between the repeating units in the more planar PDOPT which gives rise to the observed spectral red shift as well as to a reduced calculated electron-hole polarization.