Rendering protein-based particles transiently insoluble for therapeutic applications

Fluorous Tagged Peptides for Intracellular Delivery and Biomedical Imaging

Fluorous tagged peptides have shown promising features for biomedical applications such as drug delivery and multimodal imaging. The bioconjugation of fluoroalkyl ligands onto cargo peptides greatly enhances their proteolytic stability and membrane penetration via a proposed "fluorine effect". The tagged peptides also efficiently deliver other biomolecules such as DNA and siRNA into cells via a co-assembly strategy. The fluoroalkyl chains on peptides with antifouling properties enable efficient gene delivery in the presence of serum proteins. Besides intracellular biomolecule delivery, the amphiphilic peptides can be used to stabilized perfluorocarbon-filled microbubbles for ultrasound imaging. The fluorine nucleus on fluoroalkyls provides intrinsic probes for background-free magnetic resonance imaging. Labeling of fluorous tags with radionuclide 18 F also allows tracing the biodistribution of peptides via positron emission tomography imaging. This mini-review will discuss properties and mechanism of the fluorous tagged peptides in these applications.

Reversible cross-linking of gelatin by a disulphide-containing bis-succinimide for tunable degradation and release

Generally, gelatin was irreversibly cross-linked by chemical reagents to improve its water-resistance. However, few chemical reagents meet both the requirements of high cross-inking efficiency and tunable degradation. Here a reversible cross-linker, disulphide-containing bis-succinimide, was synthesized and used to control the cross-linking and degradation of edible gelatin film. Mixture of the gelatin and cross-linker for 120 min generated gelatin films that could preserve their morphology in 37 ℃ warm water for above 40 days. The gelatin film changed its microstructure from net to tightness after the cross-linking, thus facilitating the embedding of the targeted molecule into the gelatin material. The degradation of the cross-linked gelatin film and the release of its inclusion could be controlled by biocompatible glutathione. This work provides a good method for preparing modified gelatin with promising water-resistance, good biocompatibility, and tunable degradation for food/biomedical engineering applications.

Organic Molecular Probe Enabled Ionic Current Rectification toward Subcellular Detection of Glutathione with High Selectivity, Sensitivity, and Recyclability

Single-cell interrogation with the solid-state nanoprobes enables understanding of the linkage between cellular behavior and heterogeneity. Herein, inspired by the charge property of the organic molecular probe (OMP), a generic ionic current rectification (ICR) single-cell methodology is established, exemplified by subcellular detection of glutathione (GSH) with high selectivity, sensitivity, and recyclability. The as-developed nanosensor can transduce the subcellular OMP-GSH interaction via a sensitive ionic response, which stems from the superior specificity of OMP and its essential charge property. In addition, the nanosensor exhibits good reversibility, since the subsequent tandem reaction after the recognition can well recover the sensing surface. Given the diverse structures and tailorable charge properties of OMP, this work underpins a new and general method of OMP-based ICR single-cell analysis.

Electrical Conductivities of Narrow-Bandgap Polymers with Two Types of π-Conjugated Post-Crosslinking

Bandgap energy is one of the most important properties for developing electronic devices because of its influence on the electrical conductivity of substances. Many methods have been developed to control bandgap, one of which is the realization of conducting polymers using narrow-bandgap polymers; however, the preparation of these polymers is complex. In this study, water-soluble, narrow-bandgap polymers with reactive groups were prepared by the addition–condensation reaction of pyrrole (Pyr), benzaldehyde-2-sulfonic acid sodium salt (BS), and aldehyde-containing reactive groups (aldehyde and pyridine) for post-crosslinking. Two types of reactions, aldehyde with p-phenylenediamine and pyridine with 1,2-dibromoethylene, were carried out for the π-conjugated post-crosslinking between polymers. The polymers were characterized by proton nuclear magnetic resonance (¹H-NMR), thermogravimetric/differential thermal analysis (TG/DTA), UltraViolet-Visible-Near InfraRed spectroscopy (UV-Vis-NIR), and other analyses. The bandgaps of the polymers, calculated from their absorption, were less than 0.5 eV. Post-crosslinking prevents resolubility and develops electron-conducting routes between the polymer chains for π-conjugated systems. Moreover, the post-crosslinked polymers maintain their narrow bandgaps. The electrical conductivities of the as-prepared polymers were two orders of magnitude higher than those before the crosslinking.

Recent Advances in Protein Caging Tools for Protein Photoactivation

In biosciences and biotechnologies, it is recently critical to promote research regarding the regulation of the dynamic functions of proteins of interest. Light-induced control of protein activity is a strong tool for a wide variety of applications because light can be spatiotemporally irradiated in high resolutions. Therefore, synthetic, semi-synthetic, and genetic engineering techniques for photoactivation of proteins have been actively developed. In this review, the conventional approaches will be outlined. As a solution for overcoming barriers in conventional ones, our recent approaches in which proteins were chemically modified with biotinylated caging reagents are introduced to photo-activate a variety of proteins without genetic engineering and elaborate optimization. This review mainly focuses on protein caging and describes the concepts underlying the development of reported approaches that can contribute to the emergence of both novel protein photo-regulating methods and their killer applications.

Protein Nanoparticles: Uniting the Power of Proteins with Engineering Design Approaches

Protein nanoparticles, PNPs, have played a long-standing role in food and industrial applications. More recently, their potential in nanomedicine has been more widely pursued. This review summarizes recent trends related to the preparation, application, and chemical construction of nanoparticles that use proteins as major building blocks. A particular focus has been given to emerging trends related to applications in nanomedicine, an area of research where PNPs are poised for major breakthroughs as drug delivery carriers, particle-based therapeutics or for non-viral gene therapy.

Innovative Drying Technologies for Biopharmaceuticals

In the past two decades, biopharmaceuticals have been a breakthrough in improving the quality of lives of patients with various cancers, autoimmune, genetic disorders etc. With the growing demand of biopharmaceuticals, the need for reducing manufacturing costs is essential without compromising on the safety, quality, and efficacy of products. Batch Freeze-drying is the primary commercial means of manufacturing solid biopharmaceuticals. However, Freeze-drying is an economically unfriendly means of production with long production cycles, high energy consumption and heavy capital investment, resulting in high overall costs. This review compiles some potential, innovative drying technologies that have not gained popularity for manufacturing parenteral biopharmaceuticals. Some of these technologies such as Spin-freeze-drying, Spray-drying, Lynfinity® Technology etc. offer a paradigm shift towards continuous manufacturing, whereas PRINT® Technology and Microglassification^TM allow controlled dry particle characteristics. Also, some of these drying technologies can be easily scaled-up with reduced requirement for different validation processes. The inclusion of Process Analytical Technology (PAT) and offline characterization techniques in tandem can provide additional information on the Critical Process Parameters (CPPs) and Critical Quality Attributes (CQAs) during biopharmaceutical processing. These processing technologies can be envisaged to increase the manufacturing capacity for biopharmaceutical products at reduced costs.

Self-assembled ternary hybrid nanodrugs for overcoming tumor resistance and metastasis

Traditional chemotherapy exhibits a certain therapeutic effect toward malignant cancer, but easily induce tumor multidrug resistance (MDR), thereby resulting in the progress of tumor recurrence or metastasis. In this work, we deigned ternary hybrid nanodrugs (PEI/DOX@CXB-NPs) to simultaneously combat against tumor MDR and metastasis. In vitro results demonstrate this hybrid nanodrugs could efficiently increase cellular uptake at pH 6.8 by the charge reversal, break lysosomal sequestration by the proton sponge effect and trigger drugs release by intracellular GSH, eventually leading to higher drugs accumulation and cell-killing in drug-sensitive/resistant cells. In vivo evaluation revealed that this nanodrugs could significantly inhibit MDR tumor growth and simultaneously prevent A549 tumor liver/lung metastasis owing to the specifically drugs accumulation. Mechanism studies further verified that hybrid nanodrugs were capable of down-regulating the expression of MDR or metastasis-associated proteins, lead to the enhanced anti-MDR and anti-metastasis effect. As a result, the multiple combination strategy provided an option for effective cancer treatment, which could be potentially extended to other therapeutic agents or further use in clinical test.

Cell-Penetrating Mitochondrion-Targeting Ligands for the Universal Delivery of Small Molecules, Proteins and Nanomaterials

Mitochondria are key organelles that perform vital cellular functions such as those related to cell survival and death. The targeted delivery of different types of cargos to mitochondria is a well-established strategy to study mitochondrial biology and diseases. Of the various existing mitochondrion-transporting vehicles, most suffer from poor cytosolic entry, low delivery efficiency, limited cargo types, and cumbersome preparation protocols, and none was known to be universally applicable for mitochondrial delivery of different types of cargos (small molecules, proteins, and nanomaterials). Herein, two new cell-penetrating, mitochondrion-targeting ligands (named Mito^Ligand ) that are capable of effectively "tagging" small-molecule drugs, native proteins and nanomaterials are disclosed, as well as their corresponding chemoselective conjugation chemistry. Upon successful cellular delivery and rapid endosome escape, the released native cargos were found to be predominantly localized inside mitochondria. Finally, by successfully delivering doxorubicin, a well-known anticancer drug, to the mitochondria of HeLa cells, we showed that the released drug possessed potent cell cytotoxicity, disrupted the mitochondrial membrane potential and finally led to apoptosis. Our strategy thus paves the way for future mitochondrion-targeted therapy with a variety of biologically active agents.

Measuring the concentration of protein nanoparticles synthesized by desolvation method: Comparison of Bradford assay, BCA assay, hydrolysis/UV spectroscopy and gravimetric analysis

The desolvation technique is one of the most popular methods for preparing protein nanoparticles for medicine, biotechnology, and food applications. We fabricated 11 batches of BSA nanoparticles and 2 batches of gelatin nanoparticles by desolvation method. BSA nanoparticles from 2 batches were cross-linked by heating at +70 °C for 2 h; other nanoparticles were stabilized by glutaraldehyde. We compared several analytical approaches to measuring their concentration: gravimetric analysis, bicinchoninic acid assay, Bradford assay, and alkaline hydrolysis combined with UV spectroscopy. We revealed that the cross-linking degree and method of cross-linking affect both Bradford and BCA assay. Direct measurement of protein concentration in the suspension of purified nanoparticles by dye-binding assays can lead to significant (up to 50-60%) underestimation of nanoparticle concentration. Quantification of non-desolvated protein (indirect method) is affected by the presence of small nanoparticles in supernatants and can be inaccurate when the yield of desolvation is low. The reaction of cross-linker with protein changes UV absorbance of the latter. Therefore pure protein solution is an inappropriate calibrator when applying UV spectroscopy for the determination of nanoparticle concentration. Our recommendation is to determine the concentration of protein nanoparticles by at least two different methods, including gravimetric analysis.

Fabrication of stimuli-responsive nanogels for protein encapsulation and traceless release without introducing organic solvents, surfactants, or small-molecule cross-linkers

Stimuli-responsive nanogels were fabricated by reaction of proteins and polymers without using small-organic-molecules. Once the nanogels dissociated, the proteins were released with functional groups, secondary structures, and activities maintained.

Fabrication of Bovine Serum Albumin@Au Particles for Colorimetric Detection of Glutathione

Abnormal concentrations of glutathione (GSH) are important indicators of many human diseases such as cancers, liver damage, AIDS, and Alzheimer's disease. In this work, a kind of bovine serum albumin (BSA)@Au core-shell particles were fabricated using 110 nm BSA aggregates as a template, onto which gold shells composed of Au nanoparticles (NPs) were grown through a seeded growth approach. The morphology of the Au shells deposited on BSA aggregates was tuned from sparse to dense distribution of Au NPs by increasing the concentration of silver ions contained in the growth solutions. Surface plasmon resonance (SPR) peaks of BSA@Au particles were tunable in the range from 550 to 620 nm, corresponding to evolution in color from red to blue due to the enhanced plasmonic coupling among the Au NPs in the shell. The blue BSA@Au particles were qualified for colorimetric detection of GSH since GSH may act as a swelling agent for BSA@Au particles by breaking the intermolecular disulfide bonds in BSA aggregates. With an increased amount of GSH presented, the color of BSA@Au particles evolved from blue to red attributed to gradual swelling of BSA@Au particles and thus increased the distance among the Au NPs in the shell, which was readily recognized by naked eyes or recorded by ultraviolet-visible (UV-vis) spectroscopy. This colorimetric method exhibited good selectivity and anti-interference capability in the analysis of GSH in real samples. In addition, a solid sensing system for the detection of GSH was designed and fabricated by dispersing BSA@Au particles into an agarose hydrogel.

Regulatory T cells engineered with TCR signaling-responsive IL-2 nanogels suppress alloimmunity in sites of antigen encounter

Adoptive cell transfer of ex vivo expanded regulatory T cells (T_regs) has shown immense potential in animal models of auto- and alloimmunity. However, the effective translation of such T_reg therapies to the clinic has been slow. Because T_reg homeostasis is known to require continuous T cell receptor (TCR) ligation and exogenous interleukin-2 (IL-2), some investigators have explored the use of low-dose IL-2 injections to increase endogenous T_reg responses. Systemic IL-2 immunotherapy, however, can also lead to the activation of cytotoxic T lymphocytes and natural killer cells, causing adverse therapeutic outcomes. Here, we describe a drug delivery platform, which can be engineered to autostimulate T_regs with IL-2 in response to TCR-dependent activation, and thus activate these cells in sites of antigen encounter. To this end, protein nanogels (NGs) were synthesized with cleavable bis(N-hydroxysuccinimide) cross-linkers and IL-2/Fc fusion (IL-2) proteins to form particles that release IL-2 under reducing conditions, as found at the surface of T cells receiving stimulation through the TCR. T_regs surface-conjugated with IL-2 NGs were found to have preferential, allograft-protective effects relative to unmodified T_regs or T_regs stimulated with systemic IL-2. We demonstrate that murine and human NG-modified T_regs carrying an IL-2 cargo perform better than conventional T_regs in suppressing alloimmunity in murine and humanized mouse allotransplantation models. In all, the technology presented in this study has the potential to improve T_reg transfer therapy by enabling the regulated spatiotemporal provision of IL-2 to antigen-primed T_regs.

Assembly of "carrier free" enzymatic nano-reporters for improved ELISA

Enzyme-linked immunosorbent assay (ELISA) is an economic and easy operation technique that has been widely used for the detection of protein in industry. However, the low loading capacity of the enzyme reporter has contributed to the low sensitivity of traditional ELISA, and the cross-linking procedures of the enzyme-labeled antibody in ELISA methods can lead to the inactivation of the enzyme, which will further decrease the sensitivity. To address this issue, herein we fabricated "carrier-free" nanoparticles to obtain a horseradish peroxidase (HRP) labelled reporter with a high HRP loading capacity. A disulphide-containing bis-N-hydroxy succinimide (NHS) crosslinker (NHS-SS-NHS) was used to control the link and release of traceless HRPs, thus without reduction of its enzymatic activity. The HRP nanoparticle (NanoHRP) was successfully applied for dot blotting and ELISA. When carcinoembryonic antigen (CEA) was used as a target, the detection limit of the NanoHRP-based ELISA was 0.005 ng mL^-1, which was about 400 times more sensitive than traditional ELISA. A good correlation between the CEA concentrations and the response values measured by NanoHRP ELISA was obtained in the range of 0.005 to 1 ng mL^-1. This concept could be exploited to improve ELISA tests, especially those requiring a high accuracy, to facilitate physicians in deciding the appropriate medical treatment.

Physical stability of dry powder inhaler formulations

Introduction: Dry powder inhalers (DPIs) are popular for pulmonary drug delivery. Various techniques have been employed to produce inhalation drug particles and improve the delivery efficiency of DPI formulations. Physical stability of these DPI formulations is critical to ensure the delivery of a reproducible dose to the airways over the shelf-life.Areas covered: This review focuses on the impact of solid-state stability on aerosolization performance of DPI drug particles manufactured by powder production approaches and particle-engineering techniques. It also highlights the different analytical tools that can be used to characterize the physical instability originating from production and storage.Expert opinion: A majority of the DPI literature focuses on the effects of physico-chemical properties such as size, morphology, and density on aerosolization. While little has been reported on the physical stability, particularly the stability of engineered drug particles for use in DPIs. Literature data have shown that different particle-engineering methods and storage conditions may cause physical instability of dry powders for inhalation and can significantly change the aerosol performance. A systematic examination of physical instability mechanisms in DPI formulations is necessary during formulation development in order to select the optimum formulation with satisfactory stability. In addition, the use of appropriate characterization tools is critical to detect and understand physical instability during the development of DPI formulations.

Cetyltrimethylammonium chloride-loaded mesoporous silica nanoparticles as a mitochondrion-targeting agent for tumor therapy

Mitochondria play an important role in supplying cellular energy, cell signaling and governing cell death. In addition, mitochondria have also been proved to be essential for tumor generation and development. Thus, mitochondrion-targeting therapeutics and treatments have emerged as promising strategies against cancer. However, the lack of mitochondrion-targeting agents has limited their application. To this end, we report cetyltrimethylammonium chloride-loaded mesoporous silica nanoparticles conjugated with human serum albumin (CTAC@MSNs-HSA) as a mitochondrion-targeting agent for anticancer treatment. As the structure-directing agent in the synthesis of MSNs, CTAC is stored within MSNs. Due to their desirable size and HSA receptor-mediated transcytosis, CTAC@MSNs-HSA show great cellular uptake and enhanced accumulation in the cytoplasm. Positively charged CTAC could actively target mitochondria by interacting with the negatively charged mitochondria membrane, and then lead to the dysfunction of mitochondria by decreasing mitochondrial potential and intracellular ATP levels, resulting in the necrosis and apoptosis of MCF-7 cells. Therefore, significant antitumor activity is observed by in vitro studies. Moreover, in vivo studies confirm that the CTAC@MSNs-HSA are able to induce cancer cell death and efficiently inhibit tumor growth. These results demonstrate the potential of CTAC@MSNs-HSA in cancer therapeutics as well as providing insights into mitochondrion-targeting treatment.

CTAC@MSNs-HSA lead to the dysfunction of mitochondria, resulting in the necrosis and apoptosis of cancer cells.

Stimuli-responsive biohybrid nanogels with self-immolative linkers for protein protection and traceless release

Nanogels have been applied in protein delivery due to the nanoscale sizes and the crosslinked structures. However, the release of protein molecules from the nanogels without damages to the structures and functionalities is quite a challenging research subject. In this research, responsive self-immolative linker dithioethyl carbamate bond is introduced to connect protein and polymer in the nanogel so that traceless release of protein occurs upon addition of glutathione (GSH) or dithiothreitol (DTT). Thermoresponsive polymer poly(di(ethylene glycol) methyl ether methacrylate-co-2-(2-(2-hydroxyethyl) disulfanyl) ethyl methacrylate) was synthesized by reversible addition-fragmentation chain transfer (RAFT) polymerization, and was modified with 4-nitrophenyl chloroformate yielding polymer chains with pendant dithioethyl carbonate groups. The dithioethyl carbonate groups were reacted with amine groups of lipases resulting in the formation of dithioethyl carbamate bonds. Meanwhile, biohybrid nanogels were prepared by crosslinking the polymer chains with lipases. The immobilized lipase in the nanogels exhibited enhanced heat and acid resistance. Once the nanogels were treated with GSH or DTT, lipase could be released with no residual groups and most of its bioactivity was recovered.

Disulfide-Based Self-Immolative Linkers and Functional Bioconjugates for Biological Applications

It is of vital importance to reversibly mask and selectively activate bioactive agents for advanced therapeutic and diagnostic purposes, aiming to efficiently suppress background interferences and attenuate systemic toxicity. This strategy has been involved in diverse applications spanning from chemical/biological sensors and diagnostics to drug delivery nanocarriers. Among these, redox-responsive disulfide linkages have been extensively utilized by taking advantage of extracellular and intracellular glutathione (GSH) gradients. However, direct conjugation of cleavable triggers to bioactive agents through disulfide bonds suffers from bulky steric hindrance and limited choice of trigger-drug combinations. Fortunately, the emergence of disulfide self-immolative linkers (DSILs) provides a general and robust strategy to not only mask various bioactive agents through the formation of dynamic disulfide linkages but also make it possible to be selectively activated upon disulfide cleavage in the reductive cytoplasmic milieu. In this review, recent developments in DSILs are focused with special attention on emerging chemical design strategies and functional applications in the biomedical field.

Near-Infrared Photoactivatable Semiconducting Polymer Nanoblockaders for Metastasis-Inhibited Combination Cancer Therapy

Inhibition of protein biosynthesis is a promising strategy to develop new therapeutic modalities for cancers; however, noninvasive precise regulation of this cellular event in living systems has been rarely reported. In this study, a semiconducting polymer nanoblockader (SPN_B ) is developed that can inhibit intracellular protein synthesis upon near-infrared (NIR) photoactivation to synergize with photodynamic therapy (PDT) for metastasis-inhibited cancer therapy. SPN_B is self-assembled from an amphiphilic semiconducting polymer which is grafted with poly(ethylene glycol) conjugated with a protein biosynthesis blockader through a singlet oxygen (¹ O₂ ) cleavable linker. Such a designed molecular structure not only enables generation of ¹ O₂ under NIR photoirradiation for PDT, but also permits photoactivation of blockaders to terminate protein translation. Thereby, SPN_B exerts a synergistic action to afford an enhanced therapeutic efficacy in tumor ablation. More importantly, SPN_B -mediated photoactivation of protein synthesis inhibition precisely and remotely downregulates the expression levels of metastasis-related proteins in tumor tissues, eventually contributing to the complete inhibition of lung metastasis. This study thus proposes a photoactivatable protherapeutic design for metastasis-inhibited cancer therapy.

Specific and Quantitative Detection of Albumin in Biological Fluids by Tetrazolate-Functionalized Water-Soluble AIEgens

The analysis of albumin has clinical significance in diagnostic tests and obvious value to research studies on the albumin-mediated drug delivery and therapeutics. The present immunoassay, instrumental techniques, and colorimetric methods for albumin detection are either expensive, troublesome, or insensitive. Herein, a class of water-soluble tetrazolate-functionalized derivatives with aggregation-induced emission (AIE) characteristics is introduced as novel fluorescent probes for albumin detection. They can be selectively lighted up by site-specific binding with albumin. The resulting albumin fluorescent assay exhibits a low detection limit (0.21 nM), high robustness in aqueous buffer (pH = 6-9), and a broad tunable linear dynamic range (0.02-3000 mg/L) for quantification. The tetrazolate functionality endows the probes with a superior water solubility (>0.01 M) and a high binding affinity to albumin (K_D = 0.25 μM). To explore the detection mechanism, three unique polar binding sites on albumin are computationally identified, where the multivalent tetrazolate-lysine interactions contribute to the tight binding and restriction of the molecular motion of the AIE probes. The key role of lysine residues is verified by the detection of poly-l-lysine. Moreover, we applied the fluorogenic method to quantify urinary albumin in clinical samples and found it a feasible and practical strategy for albumin analysis in complex biological fluids.

Developing chemically modified redox-responsive proteins as smart therapeutics

The conditional control of protein function in response to the physiological changes of diseased cells is essential to develop smart protein therapeutics. Herein, we report a redox-responsive chemical modification of a protein by conjugating an intracellular glutathione (GSH)-cleavable ligand, NSA, onto a protein residue. We demonstrated that the NSA conjugation of Ribonuclease A (RNase A) enabled the control of the protein function by GSH in an aqueous solution and living cells, with extended applications for targeted cancer therapy using a lipid nanoparticle-based intracellular protein delivery strategy.

Where in the Cell Is our Cargo? Methods Currently Used To Study Intracellular Cytosolic Localisation

The internalisation and delivery of active substances into cells is a field of growing interest for chemical biology and therapeutics. As we move from small-molecule-based drugs towards bigger cargos, such as antibodies, enzymes, nucleases or nucleic acids, the development of efficient delivery systems becomes critical for their practical application. Different strategies and synthetic carriers have been developed; these include cationic lipids, gold nanoparticles, polymers, cell-penetrating peptides (CPPs), protein surface modification etc. However, all of these methodologies still present limitations relating to the precise targeting of the different intracellular compartments and, in particular, difficulties in access to the cellular cytosol. Additionally, the precise quantification of the cellular uptake of a compound is not enough to demonstrate delivery and/or functional activity. Therefore, methods to determine cellular distributions of cargos and carriers are of critical importance for identifying the barriers that are blocking the activity. Herein we survey the different techniques that can currently be used to track and to monitor the subcellular localisation of the synthetic compounds that we deliver inside cells.

Formulation of High-Performance Dry Powder Aerosols for Pulmonary Protein Delivery

PURPOSE

Pulmonary delivery of biologics is of great interest, as it can be used for the local treatment of respiratory diseases or as a route to systemic drug delivery. To reach the full potential of inhaled biologics, a formulation platform capable of producing high performance aerosols without altering protein native structure is required.

METHODS

A formulation strategy using Particle Replication in Non-wetting Templates (PRINT) was developed to produce protein dry powders with precisely engineered particle morphology. Stability of the incorporated proteins was characterized and the aerosol properties of the protein dry powders was evaluated in vitro with an Andersen Cascade Impactor (ACI).

RESULTS

Model proteins bovine serum albumin (BSA) and lysozyme were micromolded into 1 μm cylinders composed of more than 80% protein, by mass. Extensive characterization of the incorporated proteins found no evidence of alteration of native structures. The BSA formulation produced a mass median aerodynamic diameter (MMAD) of 1.77 μm ± 0.06 and a geometric standard deviation (GSD) of 1.51 ± 0.06 while the lysozyme formulation had an MMAD of 1.83 μm ± 0.12 and a GSD of 1.44 ± 0.03.

CONCLUSION

Protein dry powders manufactured with PRINT could enable high-performance delivery of protein therapeutics to the lungs.

Enhancing T cell therapy through TCR-signaling-responsive nanoparticle drug delivery

Adoptive cell therapy (ACT) with antigen-specific T cells has shown remarkable clinical success, but approaches to safely and effectively augment T cell function, especially in solid tumors, remain of great interest. Here we describe a strategy to “backpack” large quantities of supporting protein drugs on T cells using protein nanogels (NGs) that selectively release these cargos in response to T cell receptor (TCR) activation. We design cell surface-conjugated NGs that respond to an increase in T cell surface reduction potential upon antigen recognition, limiting drug release to sites of antigen encounter such as the tumor microenvironment. Using NGs carrying an IL-15 superagonist complex, we demonstrate that relative to systemic administration of free cytokines, NG delivery selectively expands T cells 16-fold in tumors, and allows at least 8-fold higher doses of cytokine to be administered without toxicity. The improved therapeutic window enables substantially increased tumor clearance by murine T cell and human CAR-T cell therapy in vivo.

Conjugation Chemistry-Dependent T-Cell Activation with Spherical Nucleic Acids

Spherical nucleic acids (SNAs) can be potent sequence-specific stimulators of antigen presenting cells (APCs). When loaded with peptide antigens, they can be used to activate the immune system to train T-cells to specifically kill cancer cells. Herein, the role of peptide chemical conjugation to the DNA, which is used to load SNAs with antigens via hybridization, is explored in the context of APC activation. Importantly, though the antigen chemistry does not impede TLR-9 regulated APC activation, it significantly augments the downstream T-cell response in terms of both activation and proliferation. A comparison of three linker types, (1) noncleavable, (2) cleavable but nontraceless, and (3) traceless, reveals up to an 8-fold improvement in T-cell proliferation when the traceless linker is used. This work underscores the critical importance of the choice of conjugation chemistry in vaccine development.

Electric field tuned MoS2/metal interface for hydrogen evolution catalyst from first-principles investigations

Understanding the interfacial properties of catalyst/substrate is crucial for the design of high-performance catalyst for important chemical reactions. Recent years have witnessed a surge of research in utilizing MoS₂ as a promising electro-catalyst for hydrogen production, and field effect has been employed to enhance the activity (Wang et al 2017 Adv. Mater. 29, 1604464; Yan et al 2017 Nano Lett. 17, 4109-15). However, the underlying atomic mechanism remains unclear. In this paper, by using the prototype MoS₂/Au system as a probe, we investigate effects of external electric field on the interfacial electronic structures via density functional theory (DFT) based first-principles calculations. Our results reveal that although there is no covalent interaction between MoS₂ overlayer and Au substrate, an applied electric field efficiently adjusts the charge transfer between MoS₂ and Au, leading to tunable Schottky barrier type (n-type to p-type) and decrease of barrier height to facilitate charge injection. Furthermore, we predict that the adsorption energy of atomic hydrogen on MoS₂/Au to be readily controlled by electric field to a broad range within a modest magnitude of field, which may benefit the performance enhancement of hydrogen evolution reaction. Our DFT results provide valuable insight into the experimental observations and pave the way for future understanding and control of catalysts in practice, such as those with vacancies, defects, edge states or synthesized nanostructures.

Modulated Fragmentation of Proapoptotic Peptide Nanoparticles Regulates Cytotoxicity

Peptides perform a diverse range of physiologically important functions. The formulation of nanoparticles directly from functional peptides would therefore offer a versatile and robust platform to produce highly functional therapeutics. Herein, we engineered proapoptotic peptide nanoparticles from mitochondria-disrupting KLAK peptides using a template-assisted approach. The nanoparticles were designed to disassemble into free native peptides via the traceless cleavage of disulfide-based cross-linkers. Furthermore, the cytotoxicity of the nanoparticles was tuned by controlling the kinetics of disulfide bond cleavage, and the rate of regeneration of the native peptide from the precursor species. In addition, a small molecule drug (i.e., doxorubicin hydrochloride) was loaded into the nanoparticles to confer synergistic cytotoxic activity, further highlighting the potential application of KLAK particles in therapeutic delivery.

Shaped stimuli-responsive hydrogel particles: syntheses, properties and biological responses

This review summarizes a pool of current experimental approaches and discusses perspectives in the development of the synergistic combination of shape and stimuli-response in particulate hydrogels.

Organic Polymer Chemistry in the Context of Novel Processes

This article was written to shed light on a series of what some have stated are not so obvious connections that link polymer synthesis in supercritical CO₂ to cancer treatment and vaccines, nonflammable polymer electrolytes for lithium ion batteries, and 3D printing. In telling this story, we also attempt to show the value of versatility in applying one's primary area of expertise to address pertinent questions in science and in society. In this Outlook, we attempted to identify key factors to enable a versatile and nimble research effort to take shape in an effort to influence diverse fields and have a tangible impact in the private sector through the translation of discoveries into the marketplace.

Co-opting Moore's law: Therapeutics, vaccines and interfacially active particles manufactured via PRINT®

Nanoparticle properties such as size, shape, deformability, and surface chemistry all play a role in nanomedicine drug delivery. While many studies address the behavior of particle systems in a biological setting, revealing how these properties work together presents unique challenges on the nanoscale. Particle replication in non-wetting templates (PRINT®) is one molding technique that allows for fabrication of "calibration quality" micro and nanoparticles with independent control over their physical parameters. As the only technology in the world capable of independently optimizing and robustly manufacturing GMP compliant precision particles of virtually any size, shape, and composition, the PRINT technology has the capability to engineer the future of healthcare.

Photolytic Protein Aggregates: Versatile Materials for Controlled Release of Active Proteins

Photolytic protein aggregates are developed as a facile and versatile platform for light-induced release of active proteins. The proteins modified with biotin through a photo-cleavable linker rapidly form aggregates with streptavidin and biotinylated functional molecules simply by mixing. Light irradiation releases active proteins from the aggregates in high yields, and light-induced uptake of drug-modified transferrin into living cells is successfully demonstrated.

Pulmonary Delivery of Butyrylcholinesterase as a Model Protein to the Lung

Pulmonary delivery has great potential for delivering biologics to the lung if the challenges of maintaining activity, stability, and ideal aerosol characteristics can be overcome. To study the interactions of a biologic in the lung, we chose butyrylcholinesterase (BuChE) as our model enzyme, which has application for use as a bioscavenger protecting against organophosphate exposure or for use with pseudocholinesterase deficient patients. In mice, orotracheal administration of free BuChE resulted in 72 h detection in the lungs and 48 h in the broncheoalveolar lavage fluid (BALF). Free BuChE administered to the lung of all mouse backgrounds (Nude, C57BL/6, and BALB/c) showed evidence of an acute cytokine (IL-6, TNF-α, MIP2, and KC) and cellular immune response that subsided within 48 h, indicating relatively safe administration of this non-native biologic. We then developed a formulation of BuChE using Particle Replication in Non-Wetting Templates (PRINT). Aerosol characterization demonstrated biologically active BuChE 1 μm cylindrical particles with a mass median aerodynamic diameter of 2.77 μm, indicative of promising airway deposition via dry powder inhalers (DPI). Furthermore, particulate BuChE delivered via dry powder insufflation showed residence time of 48 h in the lungs and BALF. The in vivo residence time, immune response, and safety of particulate BuChE delivered via a pulmonary route, along with the cascade impaction distribution of dry powder PRINT BuChE, showed promise in the ability to deliver active enzymes with ideal deposition characteristics. These findings provide evidence for the feasibility of optimizing the use of BuChE in the clinic; PRINT BuChE particles can be readily formulated for use in DPIs, providing a convenient and effective treatment option.

Human Serum Albumin Conjugated Nanoparticles for pH and Redox-Responsive Delivery of a Prodrug of Cisplatin

Platinum anticancer drugs are particularly in need of controlled drug delivery because of their severe side effects. Platinum(IV) agents are designed as prodrugs to reduce the side effects of platinum(II) drugs; however, premature reduction could limit the effect as a prodrug. In this work, a highly biocompatible, pH and redox dual-responsive delivery system is prepared by using hybrid nanoparticles of human serum albumin (HSA) and calcium phosphate (CaP) for the Pt(IV) prodrug of cisplatin. This conjugate is very stable under extracellular conditions, so that it protects the platinum(IV) prodrug in HSA. Upon reaching the acidic and hypoxic environment, the platinum drug is released in its active form and is able to bind to the target DNA. The Pt-HSA/CaP hybrid inhibits the proliferation of various cancer cells more efficiently than cisplatin. Different cell cycle arrests suggest different cellular responses of the Pt(IV) prodrug in the CaP nanocarrier. Interestingly, this delivery system demonstrates enhanced cytotoxicity to tumor cells, but not to normal cells.

Reductively Responsive Hydrogel Nanoparticles with Uniform Size, Shape, and Tunable Composition for Systemic siRNA Delivery in Vivo

To achieve the great potential of siRNA based gene therapy, safe and efficient systemic delivery in vivo is essential. Here we report reductively responsive hydrogel nanoparticles with highly uniform size and shape for systemic siRNA delivery in vivo. "Blank" hydrogel nanoparticles with high aspect ratio were prepared using continuous particle fabrication based on PRINT (particle replication in nonwetting templates). Subsequently, siRNA was conjugated to "blank" nanoparticles via a disulfide linker with a high loading ratio of up to 18 wt %, followed by surface modification to enhance transfection. This fabrication process could be easily scaled up to prepare large quantity of hydrogel nanoparticles. By controlling hydrogel composition, surface modification, and siRNA loading ratio, siRNA conjugated nanoparticles were highly tunable to achieve high transfection efficiency in vitro. FVII-siRNA conjugated nanoparticles were further stabilized with surface coating for in vivo siRNA delivery to liver hepatocytes, and successful gene silencing was demonstrated at both mRNA and protein levels.

Non-genetic engineering of cells for drug delivery and cell-based therapy

Cell-based therapy is a promising modality to address many unmet medical needs. In addition to genetic engineering, material-based, biochemical, and physical science-based approaches have emerged as novel approaches to modify cells. Non-genetic engineering of cells has been applied in delivering therapeutics to tissues, homing of cells to the bone marrow or inflammatory tissues, cancer imaging, immunotherapy, and remotely controlling cellular functions. This new strategy has unique advantages in disease therapy and is complementary to existing gene-based cell engineering approaches. A better understanding of cellular systems and different engineering methods will allow us to better exploit engineered cells in biomedicine. Here, we review non-genetic cell engineering techniques and applications of engineered cells, discuss the pros and cons of different methods, and provide our perspectives on future research directions.

Engineered PRINT(®) nanoparticles for controlled delivery of antigens and immunostimulants

Particle replication in non-wetting templates (PRINT) is a novel nanoparticle platform that provides compositional flexibility with the ability to specify size and shape in formulating vaccines. The PRINT platform also offers manufacturing and cost advantages over traditional particle technologies. Across multiple antigen and adjuvant formulations, robust antibody and cellular responses have been achieved using PRINT particles in mouse models. Preclinical studies applying PRINT technology in the disease areas of influenza, malaria, and pneumonia are described in this commentary. The proof of principle studies pave the way toward significant cost-effective solutions to global vaccine supply needs.

Shape Control in Engineering of Polymeric Nanoparticles for Therapeutic Delivery

Nanoparticle-mediated delivery of therapeutics holds great potential for the diagnosis and treatment of a wide range of diseases. Significant advances have been made in the design of new polymeric nanoparticle carriers through modulation of their physical and chemical structures and biophysical properties. Nanoparticle shape has been increasingly proposed as an important attribute dictating their transport properties in biological milieu. In this review, we highlight three major methods for preparing polymeric nanoparticles that allow for exquisite control of particle shape. Special attention is given to various approaches to controlling nanoparticle shape by tuning copolymer structural parameters and assembly conditions. This review also provides comparisons of these methods in terms of their unique capabilities, materials choices, and specific delivery cargos, and summarizes the biological effects of nanoparticle shape on transport properties at the tissue and cellular levels.

Generalizable Strategy for Engineering Protein Particles with pH-Triggered Disassembly and Recoverable Protein Functionality

Protein particles are promising candidates for therapeutic delivery. In this study, we report a generalizable strategy to assemble a series of proteins into pH-cleavable protein particles that recover protein functionality after disassembly. Our strategy uses an acid-labile reversible cross-linker based on maleic anhydride chemistry, which allows the cross-linking of proteins and releases unmodified proteins upon cleavage, causing minimal loss of protein functionality. The protein particles can be rapidly disassembled at a mildly acidic pH (<6.5) and inside cells with negligible cytotoxicity. Furthermore, cleavage of the cross-linker led to above 97% recovery of enzymatic activity, as evidenced by using glucose oxidase. This facile and robust strategy to engineer pH-cleavable protein particles may provide a new platform for therapeutic protein delivery as well as for small molecule drug and nucleic acid delivery.

“Reduction” responsive thymine-conjugated biodynamers: synthesis and solution properties

Nucleobase-conjugated biodynamers are generated by RAFT polymerization and the transthioesterification reaction. The biodynamers containing thioester linkages demonstrate GSH-responsive feature, and can interact with melamine and ATP in water.

Smart human serum albumin-indocyanine green nanoparticles generated by programmed assembly for dual-modal imaging-guided cancer synergistic phototherapy

Phototherapy, including photodynamic therapy (PDT) and photothermal therapy (PTT), is a light-activated local treatment modality that is under intensive preclinical and clinical investigations for cancer. To enhance the treatment efficiency of phototherapy and reduce the light-associated side effects, it is highly desirable to improve drug accumulation and precision guided phototherapy for efficient conversion of the absorbed light energy to reactive oxygen species (ROS) and local hyperthermia. In the present study, a programmed assembly strategy was developed for the preparation of human serum albumin (HSA)-indocyanine green (ICG) nanoparticles (HSA-ICG NPs) by intermolecular disulfide conjugations. This study indicated that HSA-ICG NPs had a high accumulation with tumor-to-normal tissue ratio of 36.12±5.12 at 24 h and a long-term retention with more than 7 days in 4T1 tumor-bearing mice, where the tumor and its margin, normal tissue were clearly identified via ICG-based in vivo near-infrared (NIR) fluorescence and photoacoustic dual-modal imaging and spectrum-resolved technology. Meanwhile, HSA-ICG NPs efficiently induced ROS and local hyperthermia simultaneously for synergetic PDT/PTT treatments under a single NIR laser irradiation. After an intravenous injection of HSA-ICG NPs followed by imaging-guided precision phototherapy (808 nm, 0.8 W/cm2 for 5 min), the tumor was completely suppressed, no tumor recurrence and treatments-induced toxicity were observed. The results suggest that HSA-ICG NPs generated by programmed assembly as smart theranostic nanoplatforms are highly potential for imaging-guided cancer phototherapy with PDT/PTT synergistic effects.

Precisely tunable engineering of sub-30 nm monodisperse oligonucleotide nanoparticles

Advancement of RNAi therapies is mainly hindered by the development of efficient delivery vehicles. The ability to create small size (<30 nm) oligonucleotide nanoparticles is essential for many aspects of the delivery process but is often overlooked. In this report, we describe diblock star polymers that can reproducibly complex double-stranded oligonucleotides into monodisperse nanoparticles with 15, 23, or 30 nm in diameter. The polymer-nucleic acid nanoparticles have a core-shell architecture with dense PEG brush coating. We characterized these nanoparticles using ITC, DLS, FRET, FCS, TIRF, and TEM. In addition to small size, these nanoparticles have neutral zeta-potentials, making the presented polymer architecture a very attractive platform for investigation of yet poorly studied polyplex size range for siRNA and antisense oligonucleotide delivery applications.

RNA replicon delivery via lipid-complexed PRINT protein particles

Herein we report the development of a nonviral lipid-complexed PRINT (particle replication in nonwetting templates) protein particle system (LPP particle) for RNA replicon delivery with a view toward RNA replicon-based vaccination. Cylindrical bovine serum albumin (BSA) particles (diameter (d) 1 μm, height (h) 1 μm) loaded with RNA replicon and stabilized with a fully reversible disulfide cross-linker were fabricated using PRINT technology. Highly efficient delivery of the particles to Vero cells was achieved by complexing particles with a mixture of 1,2-dioleoyl-3-trimethylammonium-propane (DOTAP) and 1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE) lipids. Our data suggest that (1) this lipid-complexed protein particle is a promising system for delivery of RNA replicon-based vaccines and (2) it is necessary to use a degradable cross-linker for successful delivery of RNA replicon via protein-based particles.

Future of the particle replication in nonwetting templates (PRINT) technology

Particle replication in nonwetting templates (PRINT) is a continuous, roll-to-roll, high-resolution molding technology which allows the design and synthesis of precisely defined micro- and nanoparticles. This technology adapts the lithographic techniques from the microelectronics industry and marries these with the roll-to-roll processes from the photographic film industry to enable researchers to have unprecedented control over particle size, shape, chemical composition, cargo, modulus, and surface properties. In addition, PRINT is a GMP-compliant (GMP=good manufacturing practice) platform amenable for particle fabrication on a large scale. Herein, we describe some of our most recent work involving the PRINT technology for application in the biomedical and material sciences.

Synthesis of protein-based, rod-shaped particles from spherical templates using layer-by-layer assembly

Nanorods provide distinct advantages over their spherical counterparts for targeted drug delivery. Here, a novel method is described for the synthesis of biocompatible protein nanorods from spherical polystyrene templates using the layer-by-layer (LBL) technique. These nanorods can be used as a vehicle for the delivery of therapeutic agents to diseased sites.