Aggregation-Free Gold Nanoparticles in Ordered Mesoporous Carbons: Toward Highly Active and Stable Heterogeneous Catalysts

Synthesis of multi-cavity mesoporous carbon nanospheres through solvent-induced self-assembly: Anode material for sodium-ion batteries with long-term cycle stability

Mesoporous carbon nanospheres (MCSs) are extensively employed in energy storage applications due to their ordered pore size, large specific surface area (SSA), and abundant active sites, resulting in excellent electrochemical performance for sodium storage. However, challenges persist in achieving precise structural control and stable synthesis reactions for these MCSs. Additionally, employing MCSs with a larger SSA in sodium storage applications can lead to increased side reactions and potential structural instability. To address these issues, we propose a solvent-induced self-assembly method for obtaining high nitrogen-containing multi-cavity MCSs with reduced SSA. The morphology and SSA of the nanospheres can be precisely adjusted by regulating the reaction time. Introducing an amine-phenol bridging structure into the polymer system significantly bolsters the structural and morphological stability of the mesoporous materials. The performance of these novel nanospheres in sodium-ion batteries (SIBs) is remarkable, exhibiting excellent sodium storage capability and exceptional ultra-long cycle stability. At a rate of 0.1 A g-1, the nanospheres achieved a high reversible capacity of 252 mAh g-1, and even after 20,000 cycles at 5 A g-1, a specific capacity of 136 mAh g-1 was retained. In summary, our study presents a novel approach for synthesizing mesoporous carbon materials and offers valuable insights for sodium storage research, opening new possibilities for enhancing energy storage applications.

Rapid colorimetric sensing of chlorpromazine HCl antipsychotic through in situ growth of gold nanoparticles

Antipsychotic drugs like chlorpromazine hydrochloride (CPZ) are widely used to treat mental illnesses but can accumulate in the environment if not properly disposed of. Long-term exposure to trace levels of such pharmaceuticals may pose health risks. This study reports a colorimetric assay for detection of the antipsychotic drug chlorpromazine hydrochloride (CPZ) based on its ability to reduce gold ions and form gold nanoparticles (AuNPs). Optimization of reaction conditions such as pH, temperature and reagent concentrations enabled quantitative analysis of CPZ concentrations from 0.1-30 μg mL-1, with a detection limit of 0.06 μg mL-1, 0.23 μg mL-1 quantification limit and less than 3.5% RSD. The AuNPs exhibited a characteristic surface plasmon resonance band at 527 nm detectable by UV-vis spectrophotometry. Method validation with spiked serum, urine and environmental water samples demonstrated acceptable accuracy and precision. Interfering substances showed minimal impact, indicating resilience and specificity. This rapid, inexpensive colorimetric assay could facilitate environmental monitoring and biomedical analysis of antipsychotic drugs.

Counting d-Orbital Vacancies of Transition-Metal Catalysts for the Sulfur Reduction Reaction

The electrocatalytic sulfur reduction reaction (SRR) would allow the production of renewable high-capacity rechargeable lithium-sulfur (Li-S) batteries using sustainable and nontoxic elemental sulfur as a cathode material, but its slow reaction rate causes a serious shuttle effect and dramatically reduces the capacity. We found that a catalyst composed of Pd nanoparticles supported by ordered mesoporous carbon (Pd/OMC) had a high reaction rate in the SRR, and a Li-S battery assembled with this catalyst had a low shuttle constant of 0.031 h-1 and a high-rate performance with a specific capacity of 1527 mAh g-1 at 0.1 C which is close to the theoretical value. The high activity of Pd/OMC with a d-orbital vacancy of 0.87 e was predicted from a volcano relationship between the d charge for the metal and the adsorption activation entropy and reaction rate for the SRR by examining Pd, Au, Pt, Rh, and Ru transition-metal nanocatalysts. The strategy of using a single electronic structure descriptor to design high-efficiency SRR catalysts has suggested a way to produce practical Li-S batteries.

Superassembly of 4-Aminothiophenol-Modified Mesoporous Titania-Alumina Oxide Heterochannels for Smart Ion Transport Based on the Photo-Induced Electron-Transfer Process

Light-responsive nanochannels have attracted extensive attention due to their noninvasive external field control and intelligent ion regulation. However, the limited photoresponsive current and the low photoelectric conversion efficiency still restrict their development. Here, a light-controlled nanochannel composed of 4-aminothiophenol and gold nanoparticles-modified mesoporous titania nanopillar arrays and alumina oxide (4-ATP-Au-MTI/AAO) is fabricated by the interfacial super-assembly strategy. Inspired by the process of electron transfer between photosystem I and photosystem II, the efficient electron transfer between TiO₂, AuNPs, and 4-ATP under light is achieved by coupling the photoresponsive materials and functional molecules. Under illumination, 4-ATP is oxidized to p-nitrothiophenol (PNTP), which brings about changes in the wettability of the nanochannel, resulting in significant improvement (252.8%) of photoresponsive current. In addition, under the action of the reductant, the nanochannels can be restored to the initial dark state, enabling multiple reversible cycles. This work opens a new route for the fabrication of high-performance light-controlled nanochannels by coupling light-responsive materials and light-responsive molecules, which may guide the development of photoelectric conversion nanochannel systems.

Disclosing the leaching behaviour of Pd@CMK3 catalysts in formic acid decomposition by electron tomography

Supported nanocatalysts exhibit different performances in batch and fixed bed reactors for a wide range of liquid phase catalytic reactions due to differences in metal leaching. To investigate this leaching process and its influence on the catalytic performance, a quantitative 3D characterization of the particle size and the particle distribution is important to follow the structural evolution of the active metal catalysts supported on porous materials during the reaction. In this work, electron tomography has been applied to uncover leaching and redeposition of a Pd@CMK3 catalyst during formic acid decomposition in batch and fixed bed reactors. The 3D distribution of Pd NPs on the mesoporous carbon CMK3 has been determined by a quantitative tomographic analysis and the determined structural changes are correlated with the observed differences in activity and stability of formic acid decomposition using batch and fixed bed reactors.

Experimental and theoretical study on the regioselective bis- or polyalkylation of 6-amino-2-mercapto-3H-pyrimidin-4-one using zeolite nano-gold catalyst and a quantum hybrid computational method

The synthetic utility of 6-amino-2-mercapto-3H-pyrimidin-4-one 3 as building blocks for new poly (pyrimidine) by alkylation using the bis(halo) compounds and zeolite nano-gold as a catalyst was investigated. Furthermore, the experimental findings by the theoretical Density functional theory (DFT) computations at the DFT/B3LYP level of theory, utilizing the 6-311++G (d,p) basis set in the gas phase, were used to investigate the distinct phases for Regio isomer 11a & 12a and 11b & 12b compounds was fair and of good quality. The stability of the 12a and 12b phases is higher than the other Regio isomer 11a and 11b phases, according to DFT modelling. By computing HOMO and LUMO pictures, the electronic parameters: dipole moment of these compounds in the ground state were theoretically investigated. Non-linear optical (NLO) characteristics and quantum chemical parameters were examined using frontier molecular orbital (FMO) analysis. Natural bond orbital analysis was used to characterize the charge transfer of the electron density in the investigated compounds (NBO). The molecular electrostatic potential surfaces (MEPS) plots have been generated, and absorption spectral analysis in different solvents has been theoretically and experimentally examined to better understand the reactivity spots. At the B3LYP/6-311G (d,p) level of theory, thermodynamic properties were also calculated. Finally, DFT calculations were used to connect the structure-activity relationship (SAR) with real antibacterial results for compounds 12a and 12b.

Preparation of SBA-15-Supported Metals by Vapor-Phase Infiltration

A simple method is presented for incorporating various catalytic metals into the pores of SBA-15 using vapor-phase infiltration. The precursors used in Atomic Layer Deposition (ALD) for Pt, Pd, Rh, Ru, and Ni were exposed to an evacuated SBA-15, resulting in monolayer films of the adsorbed precursors inside the mesopores. The metal particles that formed after removal of the precursor ligands remained in the pores and had particle sizes ranging from 3.8 nm for Pt to 5.2 nm for Ni, as determined by Transmission Electron Microscopy (TEM), XRD, and CO chemisorption. Metal loadings for saturation exposures ranged from 5.1-wt% for Ni to 9.1-wt% for Pt; however, uniform deposition was demonstrated for lower loadings of Pd by decreasing the amount of precursor. To determine the effect of the surface composition of the mesopores, Pd particles were also added to SBA-15 that was coated with a 0.2-nm film of ZrO2.

Unusual Role of the Surfactant in the Self-Assembly of Pt Alloy in Ordered Mesoporous Carbon: Tuning the Nanocluster Size

In the one-step self-assembly synthesis of metallic nanocrystals in ordered mesoporous carbon (OMC), the surfactant functionalizes well as the structure directing agent and mesopore template. Interestingly, this work demonstrates another unusual role the surfactant plays: tuning the size of the nanocrystals. Our investigation shows that the decreasing molecular weight of the PS segment of PEO-b-PS leads to sequentially reduced PtRu particle sizes of 4.4, 3.9, and 2.9 nm, while F127 which has a distinctly smaller hydrophobic PO domain with a bending structure in the micelles successfully results in sub-2 nm PtM (M = Ru, Ir, Rh, Pd) nanoclusters in OMC. This well indicates that the nanocluster size is largely decided by the volume of the hydrophobic segment of the surfactant to which the metallic precursor is linked. The smaller the volume, the fewer the precursor molecules are adsorbed, and the smaller the alloy nanoclusters. In the electrocatalytic methanol oxidation reaction, the mass activity of PtRu-1.6/OMC with 1.6 nm PtRu clusters at 0.87 V reaches 1.07 A mg_Pt^-1, which is 2.9 times that of commercial PtRu/C with an average alloy size of 2.7 nm. In principle, a wide range of ultrafine metallic clusters embedded in OMC can be prepared via this route for various applications.

Synthesis of active, robust and cationic Au25 cluster catalysts on double metal hydroxide by long-term oxidative aging of Au25(SR)18

Synthesis of an atomically precise Au₂₅ cluster catalyst was attempted by long-term, low-temperature aging of Au₂₅(BaET)₁₈ (BaET-H = 2-(Boc-amino)ethanethiol) on various double metal hydroxide (DMH) supports. X-ray absorption fine structure analysis revealed that bare Au₂₅ clusters with high loading (1 wt%) were successfully generated on the DMH containing Co and Ce (Co₃Ce) by oxidative aging in air at 150 °C for >12 h. X-ray absorption near-edge structure and X-ray photoelectron spectroscopies showed that the Au₂₅ clusters on Co₃Ce were positively charged. The Au₂₅/Co₃Ce catalyst thus synthesized exhibited superior catalytic performance in the aerobic oxidation of benzyl alcohol under ambient conditions (TOF = 1097 h^-1 with >97% selectivity to benzoic acid) and high durability owing to a strong anchoring effect. Based on kinetic experiments, we propose that abstraction of hydride from α-carbon of benzyl alkoxide by Au₂₅ is the rate-determining step of benzyl alcohol oxidation by Au₂₅/Co₃Ce.

Microcrystalline Cellulose-Supported Gold Nanoparticle Catalysts for Homocoupling of Phenylboronic Acids

A solid-grinding strategy for the large-scale synthesis of solid microcrystalline cellulose (MCC)-supported gold nanoparticle (NP) catalysts without using solvents and a sophisticated purification technique is reported. In contrast to typical solution-based methods, the deposition of high loading of gold NPs with greater uniformity on native MCC polymers without chemical modifications was achieved rapidly by manual grinding. The Fourier transform infrared (FT-IR) study revealed that the abundant hydroxyl functional groups present on the MCC support could effectively hold tiny gold NPs through hydrogen bonding between the -OH groups of MCC and gold NPs, thereby making the MCC-supported gold NPs stable heterogeneous catalysts. Thus, the Au/MCC catalyst exhibits higher catalytic activity and selectivity toward homocoupling of phenylboronic acids into corresponding biphenyls in water under air. Compared to other solid-supported gold NP catalysts, the MCC-supported gold catalysts showed greater catalytic activity and selectivity in the homocoupling of phenylboronic acids. The kinetics study on the homocoupling reaction catalyzed by Au/MCC reveals that the catalysts possess much lower apparent activation energy than the reported gold catalysts. Thus, the present sustainable approach may inspire more studies on the design of renewable biopolymer matrix-supported gold NPs in a large scale for heterogeneous catalysis.

Concurrent Oxidation-Reduction Reactions in a Single System Using a Low-Plasma Phenomenon: Excellent Catalytic Performance and Stability in the Hydrogenation Reaction

The catalytic activity and stability of metal nanocatalysts toward agglomeration and detachment during their preparation on a support surface are major challenges in practical applications. Herein, we report a novel, one-step, synchronized electro-oxidation-reduction "bottom-up" approach for the preparation of small and highly stable Cu nanoparticles (NPs) supported on a porous inorganic (TiO₂@SiO₂) coating with significant catalytic activity and stability. This unique embedded structure restrains the sintering of CuNPs on a porous TiO₂@SiO₂ surface at a high temperature and exhibits a high reduction ratio (100% in 60 s) and no decay in activity even after 30 cycles (>98% conversion in 3 min). This occurs in a model reaction of 4-nitrophenol (4-NP) hydrogenation, far exceeding the performance of most common catalysts observed to date. More importantly, nitroarene, ketone/aldehydes, and organic dyes were reduced to the corresponding compounds with 100% conversion. Density functional theory (DFT) calculations of experimental model systems with six Cu, two Fe, and four Ag clusters anchored on the TiO₂ surface were conducted to verify the experimental observations. The experimental results and DFT calculations revealed that CuNPs not only favor the adsorption on the TiO₂ surface over those of Fe and AgNPs but also boost the adsorption energy and activity of 4-NP. This strategy has also been extended to the preparation of other single-atom catalysts (e.g., FeNPs-TiO₂@SiO₂ and AgNPs-TiO₂@SiO₂), which exhibit excellent catalytic performance.

Ionic liquid-mediated hexagonally porous ZnO nanocrystal-supported Au catalysts: highly stable materials for aldehyde oxidative esterification

Ionic liquid-mediated hexagonally porous ZnO nanocrystal-supported Au catalysts: highly efficient and stable materials for oxidative esterification of methylacrolein.

Interfacial Assembly and Applications of Functional Mesoporous Materials

Functional mesoporous materials have gained tremendous attention due to their distinctive properties and potential applications. In recent decades, the self-assembly of micelles and framework precursors into mesostructures on the liquid-solid, liquid-liquid, and gas-liquid interface has been explored in the construction of functional mesoporous materials with diverse compositions, morphologies, mesostructures, and pore sizes. Compared with the one-phase solution synthetic approach, the introduction of a two-phase interface in the synthetic system changes self-assembly behaviors between micelles and framework species, leading to the possibility for the on-demand fabrication of unique mesoporous architectures. In addition, controlling the interfacial tension is critical to manipulate the self-assembly process for precise synthesis. In particular, recent breakthroughs based on the concept of the "monomicelles" assembly mechanism are very promising and interesting for the synthesis of functional mesoporous materials with the precise control. In this review, we highlight the synthetic strategies, principles, and interface engineering at the macroscale, microscale, and nanoscale for oriented interfacial assembly of functional mesoporous materials over the past 10 years. The potential applications in various fields, including adsorption, separation, sensors, catalysis, energy storage, solar cells, and biomedicine, are discussed. Finally, we also propose the remaining challenges, possible directions, and opportunities in this field for the future outlook.

Stable Mesoscale Nonwovens of Electrospun Polyacrylonitrile and Interpenetrating Supramolecular 1,3,5-Benzenetrisamide Fibers as Efficient Carriers for Gold Nanoparticles

The immobilization of metal nanoparticles without agglomeration and leaching within composite nonwovens is often challenging and of great importance, for example, for catalytic applications. In this study, we prepared composite nonwovens based on electrospun polyacrylonitrile (PAN) short fibers and supramolecular terpyridine-functionalized benzene-1,3,5-tricarboxamide (BTA1) nanofibers by a sheet-forming wet-laid process. The formation of an interpenetrating and entangled network of supramolecular BTA1 nanofibers and PAN short fibers results in mechanically stable mesoscale nonwovens. Because of the peripheral terpyridine substituents of the BTA1, nonaggregated gold nanoparticles (AuNPs) could be immobilized efficiently in the composite nonwovens. The functionality of the resulting AuNPs-loaded composite nonwovens was verified by catalytic reduction of 4-nitrophenol to 4-aminophenol as a standard model reaction. The AuNPs-loaded PAN/BTA1 composite nonwovens showed high catalytic activity, reusability, and excellent stability.

Preparation of pyrimido[4,5-b][1,6]naphthyridin-4(1H)-one derivatives using a zeolite–nanogold catalyst and their in vitro evaluation as anticancer agent

Catalysis using supported gold nanoparticles has attracted significant research interest due to their unique properties and potential that is directly related to their particle size. An efficient one-pot, three-component procedure is developed for the preparation of pyrimido[4,5- b][1,6]naphthyridin-4( 1H)-one derivatives (4a–h) by cyclocondensation of 6-amino-2-thioxo-2,3-dihydropyrimidin-4( 1H)-one (1), aromatic aldehydes (2), and 1-benzylpiperidin-4-one (3) in the presence of zeolite-nano Au as a green catalyst in ethanol at 80 °C. The presented methodology has a number of advantages including a reusable catalyst, easy access, short reaction times, high yields, and an easy work-up. The nanogold catalyst is characterized by X-ray diffraction and transmission electron microscopy. The structures of the prepared compounds are established by elemental analyses and spectral data (infrared, mass spectrometry, 1H, and 13C NMR). While molecular docking studies show that products 4a and 4c have binding affinities with the active site of CDKs. A bio-evaluation assay revealed that some of the products exhibit strong to moderate effects against proliferation of Huh7 in an in vitro model of human liver cancer cells as confirmed by morphological alteration. Compounds 4c and 4a offer the lowest IC50 values at 22.5 and 39 µM, respectively.

Sinter-resistant platinum nanocatalysts immobilized by biochar for alkane hydroisomerization

The supported platinum nanocatalysts synthesized by the first proposed biochar-assisted strategy exhibited excellent catalytic performance and metal stability in n-alkane hydroisomerization.

Microporous poly(glycidyl methacrylate-co-ethylene glycol dimethyl acrylate) microspheres: synthesis, functionalization and applications

As a new kind of functional material, micron-sized porous polymer microspheres are a hot research topic in the field of polymer materials.

Strategy to improve gold nanoparticles loading efficiency on defect-free high silica ZSM-5 zeolite for the reduction of nitrophenols

Catalytic reduction of toxic and aqueous stable nitrophenols by gold nanoparticles (Au NPs) is hot issue due to the serious environmental pollution in recent years. But the expensive price and poor recycling performance of Au NPs limit its further application. Defect-free high silica zeolite is suitable support for Au NPs due to its cheaper price, higher stability and stronger adsorbability, but the low alumina content and defect sites usually lead to poor Au NPs loading efficiency. Herein, we reported the improved Au NPs loading efficiency on defect-free high silica ZSM-5 zeolite through the additional surface fluffy structure. The fluffy structure was created through the addition of multi-walled carbon nanotubes (MWCNTs) and ethanol into synthesis gel. Highly dispersed ca. 4 nm Au NPs on zeolite surface are prepared by the green enhanced sol-gel immobilization method. The Au NPs loading efficiency on conventional ZSM-5 zeolite is 10.7%, in contrast, this result can arrive to 82.6% on fluffy structure ZSM-5 zeolite. The fluffy structure ZSM-5 zeolite and Au NPs nanocomposites show higher efficiency than traditional Au/ZSM-5 nanocomposites towards catalytic reduction of nitrophenols. Additionally, the experiments with different affecting factors (MWCNTs dosage, aging time, catalysts dosage, pH, initial 4-NP concentration, storage time and recycling times) were carried out to test general applicability of the nanocomposites. And the degradation of nitrophenols experiment was operated to explore the catalytic performance of the prepared nanocomposites in further environmental application. The detailed possible relationship between zeolite with fluffy structure and Au NPs is also proposed in the paper.

Monodispersed gold nanoparticles entrapped in ordered mesoporous carbon/silica nanocomposites as xanthine oxidase mimic for electrochemical sensing of xanthine

Monodispersed Au nanoparticles in ordered mesoporous carbon/silica (Au/OMCS) nanocomposites were prepared by the solvent evaporation induced self-assembly. Au/OMCS nanocomposites were characterized through XRD, BET, and TEM. The obtained nanocomposites exhibit uniform mesopores with the size of 18 ± 2 nm. And ultrafine Au nanoparticles with the size of 3~7 nm are well dispersed in the cavities. An ultrasensitive nanoenzyme sensor was fabricated based on a Au/OMCS-modified electrode. The Au/OMCS-modified electrode displays high xanthine oxidase-like catalytic activity evaluated through cyclic voltammetry (CV) and differential pulse voltammetry (DPV). The DPV response currents are linearly dependent on concentrations of xanthine (Xa) in the range 0.10-20 μM, along with a high sensitivity of 6.84 μA μM^-1 cm^-2 and very low detection limit of 0.006 μM (S/N = 3) under the optimal working potential of 0.64 V vs. SCE. Interference experiments show that the nanoenzyme sensor has no obvious responses to most potentially interfering species at a potential of 0.64 V. The fabricated sensor has been applied to the determination of Xa in spiked urine samples with recoveries ranging from 98.26 to 101.4%. Graphical abstract.

Key role of pore size in Cr(VI) removal by the composites of 3-dimentional mesoporous silica nanospheres wrapped with polyaniline

A series of three-dimensional silica nanospheres with different pore sizes was synthesized in a biphasic oil-water system and their pore dimensions were adjusted by controlling the composition of the oil phase. The silica nanospheres were then wrapped with polyaniline, characterized, and the obtained silica nanosphere-polyaniline composites were used for the removal of Cr(VI). Polyaniline was generated by the polymerization of aniline. The mesoporous silica has sufficient dendritic pore channels and offers a large contact surface for the polymerization of aniline. Furthermore, the mesoporous silica nanospheres are beneficial for dispersing polyaniline and transferring aqueous Cr(VI). The silica nanosphere-polyaniline composite with the largest pore size (~15.4 nm) showed the best Cr(VI) removal performance. We also investigated the kinetic characteristics and the result could be fitted to the pseudo-second-order kinetic model. Moreover, we demonstrate that the composites maintain a high Cr(VI) removal efficiency compared to other anions (H₂PO₄^-, SO₄^2-, etc.), indicating their good prospect in practical wastewater treatment. Remarkably, the silica-polyaniline composites showed enhanced Cr(VI) removal efficiency under UV-irradiation. The effects of electrons and H⁺ on Cr(VI) reduction are also discussed based on the results of UV-vis and X-ray photoelectron spectroscopic studies and bath experiments (influence of pH on adsorption capacity). Mechanistic studies indicate that the Cr(VI) removal occurs in two stages-adsorption and reduction. The negatively charged aqueous Cr(VI) species first interact with the positively charged protonated amine groups via electrostatic attraction, and are then further reduced to less-toxic Cr(III) by the electrons and H⁺ donated by the amine groups on polyaniline.

Additional Lithium Storage on Dynamic Electrode Surface by Charge Redistribution in Inactive Ru Metal

Beyond a traditional view that metal nanoparticles formed upon electrochemical reaction are inactive against lithium, recently their electrochemical participations are manifested and elucidated as catalytic and interfacial effects. Here, ruthenium metal composed of ≈5 nm nanoparticles is prepared and the pure ruthenium as a lithium-ion battery anode for complete understanding on anomalous lithium storage reaction mechanism is designed. In particular, the pure metal electrode is intended for eliminating the electrochemical reaction-derived Li₂ O phase accompanied by catalytic Li₂ O decomposition and the interfacial lithium storage at Ru/Li₂ O phase boundary, and thereby focusing on the ruthenium itself in exploring its electrochemical reactivity. Intriguingly, unusual lithium storage not involving redox reactions with electron transfer but leading to lattice expansion is identified in the ruthenium electrode. Size-dependent charge redistribution at surface enables additional lithium adsorption to occur on the inactive but more environmentally sensitive nanoparticles, providing innovative insight into dynamic electrode environments in rechargeable lithium chemistry.

Mesoporous Silica Nanosheets with Tunable Pore Lengths Supporting Metal Nanoparticles for Enhanced Hydrogenation Reactions

The channel lengths of mesoporous materials have a crucial impact on the catalytic performances of as-loaded active components. However, it remains a challenge to precisely tune the mesochannel length in a wide range from ≤50 nm to 200 nm. In this paper, we developed a top-down strategy, that is to say, crushing hollow microspheres, for preparing mesoporous silica nanosheets (MSSs) with perpendicular mesochannels and tunable thicknesses. Owing to the heterogeneous growth of the mesoporous silica layer on the surfaces of polystyrene microspheres (hard template), it was achieved to regulate the mesochannel length continuously in the range of 20–200 nm. The obtained materials were characterized by X-ray diffraction (XRD), nitrogen sorption, scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The effect of channel lengths on the catalytic activity of metal nanoparticles was then investigated in the selective hydrogenation reaction of nitroarenes. It was found that a short channel not only favored dispersing metal nanoparticles uniformly and then avoiding pore blocking, but also improved the accessibility of metal nanoparticles largely during reactions.

Ultrastable Au nanoparticles on titania through an encapsulation strategy under oxidative atmosphere

Supported gold catalysts play a crucial role in the chemical industry; however, their poor on-stream stability because of the sintering of the gold nanoparticles restricts their practical application. The strong metal-support interaction (SMSI), an important concept in heterogeneous catalysis, may be applied to construct the structure of catalysts and, hence, improve their reactivity and stability. Here we report an ultrastable Au nanocatalyst after calcination at 800 °C, in which Au nanoparticles are encapsulated by a permeable TiO_x thin layer induced by melamine under oxidative atmosphere. Owning to the formed TiO_x overlayer, the resulting Au catalyst is resistant to sintering and exhibits excellent activity and stability for catalytic CO oxidation. Furthermore, this special strategy can be extended to colloidal Au nanoparticles supported on TiO₂ and commercial gold catalyst denoted as RR2Ti, providing a universal way to engineer and develop highly stable supported Au catalysts with tunable activity.

Sintering-resistant Au nanoparticles are highly desirable due to their low Tammann temperature. Here, the authors report an ultrastable titania-supported Au nanocatalyst through an encapsulation strategy under oxidative atmosphere.

New Strategies for the Preparation of Sinter-Resistant Metal-Nanoparticle-Based Catalysts

Supported metal nanoparticles are widely used as catalysts in the industrial production of chemicals, but still suffer from deactivation because of metal leaching and sintering at high temperature. In recent years, serious efforts have been devoted to developing new strategies for stabilizing metal nanoparticles. Recent developments for preparing sinter-resistant metal-nanoparticle catalysts via strong metal-support interactions, encapsulation with oxide or carbon layers and within mesoporous materials, and fixation in zeolite crystals, are briefly summarized. Furthermore, the current challenges and future perspectives for the preparation of highly efficient and extraordinarily stable metal-nanoparticle-based catalysts, and suggestions regarding the mechanisms involved in sinter resistance, are proposed.

3D ordered macro-/mesoporous carbon supported Ag nanoparticles for efficient electrocatalytic oxygen reduction reaction

Three-dimensionally ordered macro-/mesoporous carbon (OMMC)-supported Ag nanoparticles (Ag/OMMC) with homogeneously dispersed Ag particles are prepared and investigated as effective electrocatalysts for oxygen reduction reaction (ORR) in alkaline aqueous system. The obtained Ag/OMMC catalyst displays smaller Ag particle size, higher Ag dispersion, and enhanced catalytic activity and durability compared with the carbon black Vulcan XC-72R supported Ag (Ag/XC-72R). The sizes of Ag particles supported on the OMMC and XC-72R are 4.3 and 6.5 nm, respectively. The prepared Ag/OMMC catalyst shows a positive half-wave potential of 0.79 V vs. RHE and a large diffusion-limited current of 5.6 mA cm^-2 at 0.4 V, superior to Ag/XC-72R catalyst. The better ORR performance of the Ag/OMMC is probably ascribed to the unique 3D ordered interconnected macro-/mesoporous structure, which contributes to facilitating the mass/charge transport, improving the Ag particle dispersion, and preventing the Ag particle growth and aggregation.

Synthesis of benzaldehyde with high selectivity using immobilized AuNPs and AuNPs@zeolite in a catalytic microfluidic system

In the present work, gold based catalysts were synthesized and immobilized on the surface of cyclic olefin copolymer (COC) microreactors. The microreactors were subsequently applied in a homemade microfluidic system for synthesizing benzaldehyde by oxidation of benzyl alcohol in water medium. The Au nanoparticles (NPs) immobilized on the inner surface of the microchannel showed a very high selectivity (94%) for benzaldehyde, while zeolite NPs exhibited only an adsorption feature to this reaction. Moreover, the results showed that the AuNP catalytic activity was maintained for at least 9 hours. However, the obtained conversion with AuNPs was only 20%, indicating a relatively low productivity. In comparison, AuNPs assembled on the surface of zeolite NPs (AuNPs@zeolite) and immobilized in the microchannel showed the best catalytic performance, as the highest benzaldehyde selectivity (>99%) with a relatively high benzyl alcohol conversion of 42.4% was achieved under the same conditions. To the best of our knowledge, this is the first example demonstrating the use of AuNP or AuNP@zeolite catalysts in a microsystem performing such high selectivity for benzaldehyde in water medium.

Ultrahigh Surface Area N-Doped Hierarchically Porous Carbon for Enhanced CO2 Capture and Electrochemical Energy Storage

Facile synthesis of ultrahigh surface area porous carbons with well-defined functionalities such as N-doping remains a formidable challenge as extensive pore creation results in significant damage to the active sites. Herein, an ultrahigh surface area, N-doped hierarchically porous carbon was prepared through a multicomponent co-assembly approach. The resultant N-doped hierarchically porous carbon (N-HPC) possessed an ultrahigh surface area (≈1960 m²  g^-1 ), a uniform interpenetrating micropore (≈1.3 nm) and large mesopore (≈7.6 nm) size, and high N-doping in the carbon frameworks (≈5 wt %). The N-HPC exhibited a high specific capacitance (358 F g^-1 at 0.5 A g^-1 ) as a supercapacitor electrode in aqueous alkaline electrolyte with a stable cycling performance after10 000 charge/discharge cycles. Moreover, as a CO₂ absorbent, N-HPC displayed an adsorption capacity of 29.0 mmol g^-1 at 0 °C under a high pressure of 30 bar.

A Comparison Study of Functional Groups (Amine vs. Thiol) for Immobilizing AuNPs on Zeolite Surface

Immobilization of gold nanoparticles (AuNPs) on the surface of zeolite has received a great interest due to Au@zeolite’s unique characteristics and high performance for catalysis. In this work we studied the grafting of two different functional molecules; one having an amine group (3-aminopropyl)triethoxysilane (APTES) and the second having a thiol group (3-mercaptopropyl)trimethoxysilane (MPTES) on the surface of zeolite using the same wet chemistry method. The modified zeolite surfaces were characterized using zeta potential measurements; diffuse reflectance infrared fourier transform (DRIFT) and X-ray photoelectron spectroscopy (XPS). The results confirmed a successful deposition of both functional groups at the topmost surface of the zeolite. Furthermore; transmission electron microscopy (TEM), ultraviolet-visible (UV-Vis) spectroscopy and XPS results clearly evidenced that APTES provided a better AuNPs immobilization than MPTES as a result of; (1) less active functions obtained after MPTES deposition, and (2) the better attaching ability of thiol to the gold surface.

Morphology-controlled synthesis of boehmite with enhanced efficiency for the removal of aqueous Cr(VI) and nitrates

Boehmite with different morphologies was synthesized using a simple hydrothermal method for the removal of Cr(VI) and nitrates from polluted water. When the pH of the hydrothermal system was changed, the final crystallization products had morphologies of one-dimensional rods or two-dimensional sheets with different sizes. The boehmites were characterized and used for the adsorption of aqueous Cr(VI) and nitrates. Their bulk structure and surface properties significantly changed with the corresponding morphology, which prominently affected their adsorption capacity. Boehmite with a 2D small sheet-like structure showed the highest adsorption capacity (64.7 mg g^-1). Moreover, the small sheet-like boehmite showed a remarkable adsorption capacity towards nitrates (74.5-378.5 mg g^-1) and maintained a high selectivity to Cr(VI) in the presence of competing anions such as NO₃ ^-, [Formula: see text] and Cl^-. The isotherms for Cr(VI) sorption could be better explained using the Langmuir model, indicating a monolayer adsorption of the Cr species, while the isotherms for nitrate sorption followed the Freundlich model, suggesting a multilayer adsorption. The active adsorption sites of boehmite were found to be the Lewis acid sites and surface hydroxyl groups according to the outcomes of the analysis using a series of characterization methods such as IR, Raman and x-ray photoelectron spectra. The unique structure of boehmite is beneficial to adsorb anion containments while maintaining a high selectivity to Cr(VI) species. Because of the multiple Lewis or Brönsted acid sites in boehmite, the Cr(VI) was reduced to less toxic Cr(III) species and immobilized on the surface of boehmite. In consideration of the low-cost and good regeneration capacity, the small sheet-like boehmite would be useful for the removal of anions present in polluted water.

Optimising surface d charge of AuPd nanoalloy catalysts for enhanced catalytic activity

Understanding the catalytic mechanism of bimetallic nanocatalysts remains challenging. Here, we adopt an adsorbate mediated thermal reduction approach to yield monodispersed AuPd catalysts with continuous change of the Pd-Au coordination numbers embedded in a mesoporous carbonaceous matrix. The structure of nanoalloys is well-defined, allowing for a direct determination of the structure-property relationship. The results show that the Pd single atom and dimer are the active sites for the base-free oxidation of primary alcohols. Remarkably, the d-orbital charge on the surface of Pd serves as a descriptor to the adsorbate states and hence the catalytic performance. The maximum d-charge gain occurred in a composition with 33–50 at% Pd corresponds to up to 9 times enhancement in the reaction rate compared to the neat Pd. The findings not only open an avenue towards the rational design of catalysts but also enable the identification of key steps involved in the catalytic reactions.

Understanding the catalytic mechanism of bimetallic nanocatalysts remains challenging. Here the authors demonstrate that the d-orbital charge on the surface of Pd in a well-defined AuPd nanoalloy serves as a descriptor to the adsorbate states and hence the catalytic performance.