Mixed close-packed cobalt molybdenum nitrides as non-noble metal electrocatalysts for the hydrogen evolution reaction

Ce-Doped TiO2 Fabricated Glassy Carbon Electrode for Efficient Hydrogen Evolution Reaction in Acidic Medium

The quest for sustainable and clean energy sources has intensified research on the Hydrogen Evolution Reaction (HER) in recent decades. In this study, we have presented a novel Ce-doped TiO2 catalyst synthesized through the sol-gel method, showcasing its potential as a superior electrocatalyst for HER in an acidic medium. Comprehensive characterization through X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Energy dispersive X-ray (EDX), and Raman spectroscopy confirms the successful formation of the catalyst. Electrocatalytic performance evaluation, including open circuit potential (OCP), electrochemical impedance spectroscopy (EIS), and Tafel analysis, demonstrates that GCE-5wt.%CeTiO2 outperforms bare GCE, as well as Ce and TiO2-based electrodes. Kinetic investigations reveal a Tafel slope of 105 mV dec-1, indicating the Volmer step as the rate-determining step. The onset potential for HER at GCE-5wt.%CeTiO2 is -0.16 V vs. RHE, close to the platinum electrode. Notably, the catalyst exhibits a low overpotential of 401 mV to achieve a current density of 10 mA cm-2 with an impressive 95 % Faradaic efficiency. Furthermore, the catalyst demonstrates outstanding durability, maintaining a negligible increase in overpotential during a 14-hour chronoamperometry test. These results have far-reaching implications for the development of cost-effective and efficient electrocatalysts for hydrogen production.

Transition metal nitride catalysts for selective conversion of oxygen-containing molecules

Earth abundant transition metal nitrides (TMNs) are a promising group of catalysts for a wide range of thermocatalytic, electrocatalytic and photocatalytic reactions, with potential to achieve high activity and selectivity while reducing reliance on the use of Pt-group metals. However, current fundamental understanding of the active sites of these materials and the mechanisms by which selective transformations occur is somewhat lacking. Recent investigations of these materials from our group and others have utilized probe molecules, model surfaces, and in situ techniques to elucidate the origin of their activity, strong metal-support interactions, and unique d-band electronic structures. This Perspective discusses three classes of reactions for which TMNs have been used as case studies to highlight how these properties, along with synergistic interactions with metal overlayers, can be exploited to design active, selective and stable TMN catalysts. First, studies of the reactions of C1 molecules will be discussed, specifically highlighting the ability of TMNs to activate CO2. Second, the upgrading of biomass and biomass-derived oxygenates over TMN catalysts will be reviewed. Third, the use of TMNs for H2 production via water electrolysis will be discussed. Finally, we will discuss the challenges and future directions in the study of TMN catalysts, in particular expanding on opportunities to enhance fundamental mechanistic understanding using model surfaces, the elucidation of active centers via in situ techniques, and the development of efficient synthesis methods and design principles.

Functionality Modulation Toward Thianthrene-based Metal-Free Electrocatalysts for Water Splitting

The development of metal-free bifunctional electrocatalysts for hydrogen and oxygen evolution reactions (HER and OER) is significant but rarely demonstrated. Porous organic polymers (POPs) with well-defined electroactive functionalities show superior performance in hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Precise control of the active sites' local environment requires careful modulation of linkers through the judicious selection of building units. Here, a systematic strategy is introduced for modulating functionality to design and synthesize a series of thianthrene-based bifunctional sp2 C═C bonded POPs with hollow spherical morphologies exhibiting superior electrocatalytic activity. This precise structural tuning allowed to gain insight into the effects of heteroatom incorporation, hydrophilicity, and variations in linker length on electrocatalytic activity. The most efficient bifunctional electrocatalyst THT-PyDAN achieves a current density of 10 mA cm─2 at an overpotential (η10) of ≈65 mV (in 0.5 m H2SO4) and ≈283 mV (in 1 m KOH) for HER and OER, respectively. THT-PyDAN exhibits superior activity to all previously reported metal-free bifunctional electrocatalysts in the literature. Furthermore, these investigations demonstrate that THT-PyDAN maintains its performance even after 36 h of chronoamperometry and 1000 CV cycling. Post-catalytic characterization using FT-IR, XPS, and microscopic imaging techniques underscores the long-term durability of THT-PyDAN.

Photoilluminated Redox-Processed Rh2P Nanoparticles on Photocathodes for Stable Hydrogen Production in Acidic Environments

While photoelectrochemical (PEC) cells show promise for solar-driven green hydrogen production, exploration of various light-absorbing multilayer coatings has yet to significantly enhance their hydrogen generation efficiency. Acidic conditions can enhance the hydrogen evolution reaction (HER) kinetics and reduce overpotential losses. However, prolonged acidic exposure deactivates noble metal electrocatalysts, hindering their long-term stability. Progress requires addressing catalyst degradation to enable stable, efficient, and acidic PEC cells. Here, we proposed a process design based on the photoilluminated redox deposition (PRoD) approach. We use this to grow crystalline Rh2P nanoparticles (NPs) with a size of 5-10 on 30 nm-thick TiO2, without annealing. Atomically precise reaction control was performed by using several cyclic voltammetry cycles coincident with light irradiation to create a system with optimal catalytic activity. The optimized photocathode, composed of Rh2P/TiO2/Al-ZnO/Cu2O/Sb-Cu2O/ITO, achieved an excellent photocurrent density of 8.2 mA cm-2 at 0 VRHE and a durable water-splitting reaction in a strong acidic solution. Specifically, the Rh2P-loaded photocathode exhibited a 5.3-fold enhancement in mass activity compared to that utilizing just a Rh catalyst. Furthermore, in situ scanning transmission electron microscopy (STEM) was performed to observe the real-time growth process of Rh2P NPs in a liquid cell.

Lattice engineering of noble metal-based nanomaterials via metal-nonmetal interactions for catalytic applications

Noble metal-based nanomaterials possess outstanding catalytic properties in various chemical reactions. However, the increasing cost of noble metals severely hinders their large-scale applications. A cost-effective strategy is incorporating noble metals with light nonmetal elements (e.g., H, B, C, N, P and S) to form noble metal-based nanocompounds, which can not only reduce the noble metal content, but also promote their catalytic performances by tuning their crystal lattices and introducing additional active sites. In this review, we present a concise overview of the recent advancements in the preparation and application of various kinds of noble metal-light nonmetal binary nanocompounds. Besides introducing synthetic strategies, we focus on the effects of introducing light nonmetal elements on the lattice structures of noble metals and highlight notable progress in the lattice strain engineering of representative core-shell nanostructures derived from these nanocompounds. In the meantime, the catalytic applications of the light element-incorporated noble metal-based nanomaterials are discussed. Finally, we discuss current challenges and future perspectives in the development of noble metal-nonmetal based nanomaterials.

Atomically-Thin Holey 2D Nanosheets of Defect-Engineered MoN-Mo5 N6 Composites as Effective Hybridization Matrices

The defect engineering of inorganic solids has received significant attention because of its high efficacy in optimizing energy-related functionalities. Consequently, this approach is effectively leveraged in the present study to synthesize atomically-thin holey 2D nanosheets of a MoN-Mo5 N6 composite. This is achieved by controlled nitridation of assembled MoS2 monolayers, which induced sequential cation/anion migration and a gradual decrease in the Mo valency. Precise control of the interlayer distance of the MoS2 monolayers via assembly with various tetraalkylammonium ions is found to be crucial for synthesizing sub-nanometer-thick holey MoN-Mo5 N6 nanosheets with a tunable anion/cation vacancy content. The holey MoN-Mo5 N6 nanosheets are employed as efficient immobilization matrices for Pt single atoms to achieve high electrocatalytic mass activity, decent durability, and low overpotential for the hydrogen evolution reaction (HER). In situ/ex situ spectroscopy and density functional theory (DFT) calculations reveal that the presence of cation-deficient Mo5 N6 domain is crucial for enhancing the interfacial interactions between the conductive molybdenum nitride substrate and Pt single atoms, leading to enhanced electron injection efficiency and electrochemical stability. The beneficial effects of the Pt-immobilizing holey MoN-Mo5 N6 nanosheets are associated with enhanced electronic coupling, resulting in improvements in HER kinetics and interfacial charge transfer.

Noble Metal Phosphides Supported on CoNi Metaphosphate for Efficient Overall Water Splitting

Transition metal metaphosphates and noble metal phosphides prepared under similar conditions are potential hybrid catalysts for electrocatalytic water splitting, which is of great significance for H2 production. Herein, the structure and electrocatalytic activity of different noble metal species (i.e., Rh, Pd, Ir) on CoNiP4O12 nanoarrays have been systematically studied. Due to the different formation energies of noble metal phosphides, the phosphides of Rh (RhPx) and Pd (PdPx) as well as the noble metal Ir are obtained under the same phosphorylation conditions perspectively. RhPx/CoNiP4O12 and PdPx/CoNiP4O12 exhibit much better HER activity than Ir/CoNiP4O12 due to the advantages of phosphides. Density functional theory (DFT) calculations reveal that the extraordinary activity of RhPx/CoNiP4O12 originated from the strong affinity to H2O and optimal adsorption for H*. The best RhPx/CoNiP4O12 only requires a low overpotential of 30 and 234 mV to deliver 10 mA cm-2 for HER and OER, respectively, and therefore is effective for overall water splitting (requiring 1.57 V to achieve a current density of 10 mA cm-2). This work not only develops a novel RhPx/CoNiP4O12 electrocatalyst for overall water splitting but also provides deep insight into the formation mechanism of noble metal phosphides.

Metal Electrocatalysts for Hydrogen Production in Water Splitting

The rising demand for fossil fuels and the resulting pollution have raised environmental concerns about energy production. Undoubtedly, hydrogen is the best candidate for producing clean and sustainable energy now and in the future. Water splitting is a promising and efficient process for hydrogen production, where catalysts play a key role in the hydrogen evolution reaction (HER). HER electrocatalysis can be well performed by Pt with a low overpotential close to zero and a Tafel slope of about 30 mV dec-1. However, the main challenge in expanding the hydrogen production process is using efficient and inexpensive catalysts. Due to electrocatalytic activity and electrochemical stability, transition metal compounds are the best options for HER electrocatalysts. This study will focus on analyzing the current situation and recent advances in the design and development of nanostructured electrocatalysts for noble and non-noble metals in HER electrocatalysis. In general, strategies including doping, crystallization control, structural engineering, carbon nanomaterials, and increasing active sites by changing morphology are helpful to improve HER performance. Finally, the challenges and future perspectives in designing functional and stable electrocatalysts for HER in efficient hydrogen production from water-splitting electrolysis will be described.

Nitriding-reduction fabrication of coralloid CoN/Ni/NiO for efficient electrocatalytic overall water splitting

The introduction of nitride in Ni/NiO-based catalytic system for electrocatalystic water splitting via a skillful strategy remains a great challenge. Herein, we proposed a one-step urea nitriding-reduction strategy for the fabrication of novel CoN/Ni/NiO electrocatalyst on carbon cloth (CC). The combination of CoN and Ni/NiO could construct CoN/Ni interface and expose more active sites, thus exhibiting excellent hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) performance in alkaline media. Consequently, CoN/Ni/NiO catalyst exhibited remarkable HER/OER performance with an overpotential of 92 mV/114 mV at 10 mA cm-2 in 1.0 M KOH, along with a low cell voltage of 1.56 V to enhance overall water splitting. In addition, when CoN was introduced in Ni/NiO system, CoN/Ni/NiO displayed high conductivity, large active surface areas, high Faradic efficiency (FE) and remarkable stability. Density functional theory (DFT) calculations demonstrated that CoN/Ni/NiO possessed a decreased d-band center beneficial for optimizing the energy barrier of intermediates. Specifically, the ΔGH2O (0.088 eV) and ΔGH* (0.18 eV) in HER and the ΔGOOH* (1.4 eV) of rate determining step (O*→OOH*) in OER of CoN/Ni/NiO catalyst were optimized to achieve high water splitting activity. Simultaneously, for adsorbed H2O on CoN/Ni/NiO, the OH bond length extended from 0.975 to 1.110 Å, and the bond angle enlarged from 104.271 to 109.471°, thereby directly demonstrating the excellent HER/OER performance of CoN/Ni/NiO.

1D/3D Heterogeneous Assembling Body of Cobalt Nitrides for Highly Efficient Overall Hydrazine Splitting and Supercapacitors

Herein, the construction of a heterostructured 1D/3D CoN-Co2 N@NF (nickel foam) electrode used for thermodynamically favorable hydrazine oxidation reaction (HzOR), as an alternative to sluggish anodic oxygen evolution reaction (OER) in water splitting for hydrogen production, is reported. The electrode exhibits remarkable catalytic activities, with an onset potential of -0.11 V in HzOR and -71 mV for a current density of 10 mA cm-2 in hydrogen evolution reaction (HER). Consequently, an extraordinary low cell voltage of 53 mV is required to achieve 10 mA cm-2 for overall hydrazine splitting in a two-electrode system, demonstrating significant energy-saving advantages over conventional water splitting. The HzOR proceeds through the 4e- reaction pathway to release N2 while the 1e- pathway to emit NH3 is uncompetitive, as evidenced by differential electrochemical mass spectrometric measurements. The X-ray absorption spectroscopy, in situ Raman spectroscopy, and theoretical calculations identify cobalt nitrides rather than corresponding oxides/(oxy)hydroxides as catalytic species for HzOR and illustrate advantages of heterostructured CoN-Co2 N in optimizing adsorption energies of intermediates/reagents and promoting catalytic activities toward both HzOR and HER. The CoN-Co2 N@NF is also an excellent supercapacitive material, exhibiting an increased specific capacity (938 F g-1 at 1 A g-1 ) with excellent cycling stability (95.8%, 5000 cycles).

Chemical Looping Technology in Mild-Condition Ammonia Production: A Comprehensive Review and Analysis

Ammonia is an efficient and clean hydrogen carrier that promises to tackle the increasing energy and environmental problems. However, more than 90% of ammonia is produced by the Haber-Bosch process, and its enormous energy consumption and CO2 emissions require the development of novel alternatives. Chemical looping technology can decouple the one-step ammonia synthesis reaction into separated nitridation and hydrogenation processes at atmospheric pressure, thereby achieving the mild ammonia synthesis based on renewable energy. The strategy of stepwise reactions circumvents the problem of competing adsorption of N2 and H2 /H2 O at the active sites and provides additive freedom for optimal regulation of sub-reactions. This review introduces the concept and mechanism of chemical looping ammonia production (CLAP), and comprehensively summarizes the state-of-art research from the perspective of reaction pathways and nitrogen carriers. The challenges faced by CLAP and strategies to address them in terms of nitrogen carriers, methods, equipment, and technological processes are also proposed.

Two-Dimensional Atomically Thin Titanium Nitride via Topochemical Conversion

Titanium nitride as a typical transition metal nitride (TMN) has attracted increasing interest for its fascinating characteristics and widespread applications. However, the synthesis of two-dimensional (2D) atomically thin titanium nitride is still challenging which hinders its further research in electronic and optoelectronic fields. Here, 2D titanium nitride with a large area was prepared via in situ topochemical conversion of the titanate monolayer. The titanium nitride reveals a thickness-dependent metallic-to-semiconducting transition, where the atomically thin titanium nitride with a thickness of ∼1 nm exhibits an n-type semiconducting behavior and a highly sensitive photoresponse and displays photoswitchable resistance by repeated light irradiation. First-principles calculations confirm that the chemisorbed oxygen on the surface of the titanium nitride nanosheet depletes its electrons, while the light irradiation induced desorption of oxygen leads to increased electron doping and hence the conductance of titanium nitride. These results may allow the scalable synthesis of ultrathin TMNs and facilitate their fundamental physics research and next-generation optoelectronic applications.

Hydrogen-bond induced and hetero coupling dual effects in N-doped carbon coated CrN/Ni nanosheets for efficient alkaline freshwater/seawater hydrogen evolution

Developing efficient and robust non-precious-metal-based hydrogen evolution reaction (HER) catalysts is highly desirable but remains quite challenging for alkaline freshwater/seawater electrolysis. In the present study, we report a theory-guided design and synthesis of a nickel foam (NF) supported N-doped carbon-coated (NC) nickel (Ni)/chromium nitride (CrN) nanosheets (NC@CrN/Ni) as a highly active and durable electrocatalyst. Our theoretical calculation firstly reveals that CrN/Ni heterostructure can greatly promote the H₂O dissociation via hydrogen-bond induced effect, and the N site can be optimized by hetero coupling to achieve a facile hydrogen associative desorption, thereby significantly boosting alkaline HER. Guided by theoretical calculation, we prepared the nickel-based metal-organic framework as a precursor, and introduced the Cr by the subsequent hydrothermal treatment, finally obtained the target catalyst by ammonia pyrolysis. Such a simple process ensures the exposure of abundant accessible active sites. Consequently, the as-prepared NC@CrN/Ni catalyst exhibits outstanding performance in both alkaline freshwater and seawater, with the respective overpotential of only 24 and 28 mV at a current density of 10 mA cm^-2, respectively. More impressively, the catalyst also possesses superior durability in the constant-current test of 50 h at the different current densities of 10, 100, and 1000 mA cm^-2.

Carbonization of a Molybdenum Substrate Surface and Nanoparticles by a One-Step Method of Femtosecond Laser Ablation in a Hexane Solution

Molybdenum carbides (MoC and Mo2C) are being reported for various applications, for example, catalysts for sustainable energies, nonlinear materials for laser applications, protective coatings for improving tribological performance, and so on. A one-step method for simultaneously fabricating molybdenum monocarbide (MoC) nanoparticles (NPs) and MoC surfaces with a laser-induced periodic surface structure (LIPSS) was developed by using pulsed laser ablation of a molybdenum (Mo) substrate in hexane. Spherical NPs with an average diameter of 61 nm were observed by scanning electron microscopy. The X-ray diffraction pattern and electron diffraction (ED) pattern results indicate that a face-centered cubic MoC was successfully synthesized for the NPs and on the laser-irradiated area. Notably, the ED pattern suggests that the observed NPs are nanosized single crystals, and a carbon shell was observed on the surface of MoC NPs. The X-ray diffraction pattern of both MoC NPs and LIPSS surface indicates the formation of FCC MoC, agreeing with the results of ED. The results of X-ray photoelectron spectroscopy also showed the bonding energy attributed to Mo-C, and the sp2-sp3 transition was confirmed on the LIPSS surface. The results of Raman spectroscopy have also supported the formation of MoC and amorphous carbon structures. This simple synthesis method for MoC may provide new possibilities for preparing Mo x C-based devices and nanomaterials, which may contribute to the development of catalytic, photonic, and tribological fields.

A comprehensive review on the electrochemical parameters and recent material development of electrochemical water splitting electrocatalysts

Electrochemical splitting of water is an appealing solution for energy storage and conversion to overcome the reliance on depleting fossil fuel reserves and prevent severe deterioration of the global climate. Though there are several fuel cells, hydrogen (H2) and oxygen (O2) fuel cells have zero carbon emissions, and water is the only by-product. Countless researchers worldwide are working on the fundamentals, i.e. the parameters affecting the electrocatalysis of water splitting and electrocatalysts that could improve the performance of the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) and overall simplify the water electrolysis process. Noble metals like platinum for HER and ruthenium and iridium for OER were used earlier; however, being expensive, there are more feasible options than employing these metals for all commercialization. The review discusses the recent developments in metal and metalloid HER and OER electrocatalysts from the s, p and d block elements. The evaluation perspectives for electrocatalysts of electrochemical water splitting are also highlighted.

Impacts of ruthenium valence state on the electrocatalytic activity of ruthenium ion-complexed graphitic carbon nitride/reduced graphene oxide nanosheets towards hydrogen evolution reaction

Design and engineering of effective electrode catalysts represents a critical first step for hydrogen production by electrochemical water splitting. Nanocomposites based on ruthenium atomically dispersed within a carbon scaffold have emerged as viable candidates. In the present study, ruthenium metal centers are atomically embedded within graphitic carbon nitride/reduced graphene oxide nanosheets by thermal refluxing. Subsequent chemical reduction/oxidation leads to ready manipulation of the ruthenium valence state, as evidenced in microscopic and spectroscopic measurements, and hence enhancement/diminishment of the electrocatalytic activity towards hydrogen evolution reaction in both acidic and alkaline media. This is largely ascribed to the increased/reduced contribution of the Ru valence electrons to the density of state near the Fermi level which dictates the binding and reduction of hydrogen. Results from this study highlight the significance of the valence state of metal centers in the manipulation and optimization of the catalytic performance of single atom catalysts.

Adsorption Energy in Oxygen Electrocatalysis

Adsorption energy (AE) of reactive intermediate is currently the most important descriptor for electrochemical reactions (e.g., water electrolysis, hydrogen fuel cell, electrochemical nitrogen fixation, electrochemical carbon dioxide reduction, etc.), which can bridge the gap between catalyst's structure and activity. Tracing the history and evolution of AE can help to understand electrocatalysis and design optimal electrocatalysts. Focusing on oxygen electrocatalysis, this review aims to provide a comprehensive introduction on how AE is selected as the activity descriptor, the intrinsic and empirical relationships related to AE, how AE links the structure and electrocatalytic performance, the approaches to obtain AE, the strategies to improve catalytic activity by modulating AE, the extrinsic influences on AE from the environment, and the methods in circumventing linear scaling relations of AE. An outlook is provided at the end with emphasis on possible future investigation related to the obstacles existing between adsorption energy and electrocatalytic performance.

Transition Metal Non-Oxides as Electrocatalysts: Advantages and Challenges

The identification of hydrogen as green fuel in the near future has stirred global realization toward a sustainable outlook and thus boosted extensive research in the field of water electrolysis focusing on the hydrogen evolution reaction (HER), oxygen evolution reaction (OER), and oxygen reduction reaction (ORR). A huge class of compounds consisting of transition metal-based nitrides, carbides, chalcogenides, phosphides, and borides, which can be collectively termed transition metal non-oxides (TMNOs), has emerged recently as an efficient class of electrocatalysts in terms of performance and longevity when compared to transition metal oxides (TMOs). Moreover, the superiority of TMNOs over TMOs to effectively catalyze not only OERs but also HERs and ORRs renders bifunctionality and even trifunctionality in some cases and therefore can replace conventional noble metal electrocatalysts. In this review, the crystal structure and phases of different classes of nanostructured TMNOs are extensively discussed, focusing on recent advances in design strategies by various regulatory synthetic routes, and hence diversified properties of TMNOs are identified to serve as next-generation bi/trifunctional electrocatalysts. The challenges and future perspectives of materials in the field of energy conversion and storage aiding toward a better hydrogen economy are also discussed in this review.

Layered Porous Graphitic Carbon Nitride Stabilized Effective Co2SnO4 Inverse Spinel as a Bifunctional Electrocatalyst for Overall Water Splitting

Developing an efficient, low-cost, and non-noble metal oxide-based nanohybrid material for overall water splitting is a highly desirable approach to promote clean energy harnessing and to minimize environmental issues. Accordingly, we proposed an interfacial engineering approach to construct layered porous graphitic carbon nitride (g-C₃N₄)-stabilized Co₂SnO₄ inverse spinel nanohybrid materials as highly active bifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in an alkaline medium. Here, a Co₂SnO₄/g-C₃N₄ nanohybrid with a layered porous g-C₃N₄ stabilized cubelike inverse spinel has been synthesized with an enhanced surface area via a simple one-pot hydrothermal method. Besides, detailed structural and morphological characterizations were carried out using X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), field emission-scanning electron microscopy (FE-SEM), high-resolution transmission electron microscopy (HR-TEM), Fourier transform infrared (FT-IR), and Brunauer-Emmett-Teller (BET) analysis. Briefly, XPS analysis has revealed the existence of a strong coupling bond at the interface between a definite proportion of g-C₃N₄ nanosheets and the inverse spinel, which act as an electron transport channel to explore the exceptional performances for HER and OER. Compared to the Co₂SnO₄ inverse spinel lattice or g-C₃N₄ nanosheets, the prepared Co₂SnO₄/g-C₃N₄ nanohybrid-loaded 316 SSL mesh electrode showed excellent and stable electrocatalytic performances with very low overpotentials of 41 mV for HER and 260 mV for OER to reach the current density of 10 mA cm^-2. To understand the electrocatalytic phenomena, the faradic efficiency was calculated for the prepared bifunctional electrocatalyst as 96%, which effectively would favor water electrolysis. Accordingly, the Co₂SnO₄/g-C₃N₄ nanohybrid-loaded electrodes were constructed, and the minimum cell voltage was found to be 1.52 V to reach the current density of 10 mA cm^-2, which is comparable to the standard RuO₂∥Pt/C in two-electrode systems. Thus, the developed nanohybrid-based electrocatalyst could be an alternative to noble metal-centered systems for highly efficient overall water splitting.

Strategies to improve electrocatalytic performance of MoS2-based catalysts for hydrogen evolution reactions

Electrocatalytic hydrogen evolution reactions (HERs) are a key process for hydrogen production for clean energy applications. HERs have unique advantages in terms of energy efficiency and product separation compared to other methods. Molybdenum disulfide (MoS2) has attracted extensive attention as a potential HER catalyst because of its high electrocatalytic activity. However, the HER performance of MoS2 needs to be improved to make it competitive with conventional Pt-based catalysts. Herein, we summarize three typical strategies for promoting the HER performance, i.e., defect engineering, heterostructure formation, and heteroatom doping. We also summarize the computational density functional theory (DFT) methods used to obtain insight that can guide the construction of MoS2-based materials. Additionally, the challenges and prospects of MoS2-based catalysts for the HER have also been discussed.

Water electrolysis: from textbook knowledge to the latest scientific strategies and industrial developments

Replacing fossil fuels with energy sources and carriers that are sustainable, environmentally benign, and affordable is amongst the most pressing challenges for future socio-economic development. To that goal, hydrogen is presumed to be the most promising energy carrier. Electrocatalytic water splitting, if driven by green electricity, would provide hydrogen with minimal CO2 footprint. The viability of water electrolysis still hinges on the availability of durable earth-abundant electrocatalyst materials and the overall process efficiency. This review spans from the fundamentals of electrocatalytically initiated water splitting to the very latest scientific findings from university and institutional research, also covering specifications and special features of the current industrial processes and those processes currently being tested in large-scale applications. Recently developed strategies are described for the optimisation and discovery of active and durable materials for electrodes that ever-increasingly harness first-principles calculations and machine learning. In addition, a technoeconomic analysis of water electrolysis is included that allows an assessment of the extent to which a large-scale implementation of water splitting can help to combat climate change. This review article is intended to cross-pollinate and strengthen efforts from fundamental understanding to technical implementation and to improve the 'junctions' between the field's physical chemists, materials scientists and engineers, as well as stimulate much-needed exchange among these groups on challenges encountered in the different domains.

Synthesis of Nickel Nitride-Based 1D/0D Heterostructure via a Morphology-Inherited Nitridation Strategy for Efficient Electrocatalytic Hydrogen Evolution

The fabrication of heterostructures has inspired extensive interest in promoting the performance of solar cells or solar fuel production, but it is still challenging for nitrides to prepare structurally ordered heterostructures. Herein, one nickel nitride-based heterostructure composed of 1D Ni_0.2 Mo_0.8 N nanorods and 0D Ni₃ N nanoparticles (denoted as NiMoN/NiN) is reported to exhibit significantly promoted hydrogen evolution reaction performance in both alkaline and neutral media. In particular, the optimal overpotential of the NiMoN/NiN sample at 10 mA cm^-2 in 1 m KOH is 49 mV. The successful fabrication of 1D/0D heterostructures is mainly ascribed to morphology-inherited nitridation of 1D oxide precursor (denoted as NiMoO-NRs) in situ grown on Ni foam surface, and attributed to strong Lewis acid-base interaction that renders the Ni²⁺ ions emitted from the oxide precursor to well coordinate with NH₃ for the formation of Ni₃ N nanoparticles during the nitridation process. It is theoretically and experimentally demonstrated that the special 1D/0D heterostructure provides tandem active phases Ni_0.2 Mo_0.8 N and Ni₃ N for synergistic promotion in lowering the activation energy of H₂ O dissociation and optimizing the adsorption energy of H, respectively. This work may open a new avenue for developing highly active tandem electrocatalysts for promising renewable energy conversion.

Pt- and Pd-modified transition metal nitride catalysts for the hydrogen evolution reaction

Hydrogen production via electrochemical splitting of water using renewable electricity represents a promising strategy. Currently, platinum group metals (PGMs) are the best performing hydrogen evolution reaction (HER) catalysts. Thus, the design of non-PGM catalysts or low-loading PGM catalysts is essential for the commercial development of hydrogen generation technologies via electrochemical splitting of water. Here, we employed density functional theory (DFT) calculations to explore Pt and Pd modified transition metal nitrides (TMNs) as low-cost HER catalysts. Our calculations show that Pt/Pd binds strongly with TMs on TMN(111) surfaces, leading to the formation of stable Pt and Pd-monolayer (ML)-TMN(111) structures. Furthermore, our calculated hydrogen binding energy (HBE) demonstrates that Pt/MnN, Pt/TiN, Pt/FeN, Pt/VN, Pt/HfN, Pd/FeN, Pd/TaN, Pd/NbN, Pd/TiN, Pd/HfN, Pd/MnN, Pd/ScN, Pd/VN, and Pd/ZrN are promising candidates for the HER with a low value of limiting potential (U_L) similar to that calculated on Pt(111).

Efficient Alkaline Water/Seawater Hydrogen Evolution by a Nanorod-Nanoparticle-Structured Ni-MoN Catalyst with Fast Water-Dissociation Kinetics

Achieving efficient and durable nonprecious hydrogen evolution reaction (HER) catalysts for scaling up alkaline water/seawater electrolysis is desirable but remains a significant challenge. Here, a heterogeneous Ni-MoN catalyst consisting of Ni and MoN nanoparticles on amorphous MoN nanorods that can sustain large-current-density HER with outstanding performance is demonstrated. The hierarchical nanorod-nanoparticle structure, along with a large surface area and multidimensional boundaries/defects endows the catalyst with abundant active sites. The hydrophilic surface helps to achieve accelerated gas-release capabilities and is effective in preventing catalyst degradation during water electrolysis. Theoretical calculations further prove that the combination of Ni and MoN effectively modulates the electron redistribution at their interface and promotes the sluggish water-dissociation kinetics at the Mo sites. Consequently, this Ni-MoN catalyst requires low overpotentials of 61 and 136 mV to drive current densities of 100 and 1000 mA cm^-2 , respectively, in 1 m KOH and remains stable during operation for 200 h at a constant current density of 100 or 500 mA cm^-2 . This good HER catalyst also works well in alkaline seawater electrolyte and shows outstanding performance toward overall seawater electrolysis with ultralow cell voltages.

Utility of NaMoO3F as a Precursor for Homogeneous Distribution of Cobalt Dopants in Molybdenum Oxynitrides

Molybdenum nitrides and their related compounds have been focused as a catalyst for several reactions. Although the doping into molybdenum nitrides lead to the higher catalytic activity, the simultaneous control of the morphology, the crystallinity, and the dopant state in doped MoN cannot be easily achieved due to the limitation of the synthesis method. In this study, one of the mixed anion compounds, NaMoO 3 F was used as a precursor for molybdenum oxynitrides with hexagonal MoN phase. This route led to the homogeneous distribution of cobalt in the molybdenum oxynitride compared with that obtained by the other method. The cobalt-doped molybdenum oxynitride from NaMoO 3 F exhibited high oxygen reduction reaction catalytic activity due to the high distribution of cobalt in the crystal. This paper proposes that the mixed anion compounds can be a unique precursor for the other materials to expand the controllability of materials toward improvement of their activity.

Metal nitride-based nanostructures for electrochemical and photocatalytic hydrogen production

The over-dependence on fossil fuels is one of the critical issues to be addressed for combating greenhouse gas emissions. Hydrogen, one of the promising alternatives to fossil fuels, is renewable, carbon-free, and non-polluting gas. The complete utilization of hydrogen in every sector ranging from small to large scale could hugely benefit in mitigating climate change. One of the key aspects of the hydrogen sector is its production via cost-effective and safe ways. Electrolysis and photocatalysis are well-known processes for hydrogen production and their efficiency relies on electrocatalysts, which are generally noble metals. The usage of noble metals as catalysts makes these processes costly and their scarcity is also a limiting factor. Metal nitrides and their porous counterparts have drawn considerable attention from researchers due to their good promise for hydrogen production. Their properties such as active metal centres, nitrogen functionalities, and porous features such as surface area, pore-volume, and tunable pore size could play an important role in electrochemical and photocatalytic hydrogen production. This review focuses on the recent developments in metal nitrides from their synthesis methods point of view. Much attention is given to the emergence of new synthesis techniques, methods, and processes of synthesizing the metal nitride nanostructures. The applications of electrochemical and photocatalytic hydrogen production are summarized. Overall, this review will provide useful information to researchers working in the field of metal nitrides and their application for hydrogen production.

Engineering transition metal catalysts for large-current-density water splitting

Electrochemical water splitting plays a crucial role in transferring electricity to hydrogen fuel and appropriate electrocatalysts are crucial to satisfy the strict industrial demand. However, the successfully developed non-noble metal catalysts have a small tested range and the current density is usually less than 100 mA cm^-2, which is still far away from the practical application standards. Aiming to provide guidance for the fabrication of more advanced electrocatalysts with a large current density, we herein systematically summarize the recent progress achieved in the field of cost-efficient and large-current-density electrocatalyst design. Beginning by illustrating the oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) mechanisms, we elaborate on the concurrent issues of non-noble metal catalysts that are required to be addressed. In view of large-current-density operating conditions, some distinctive features with regard to good electrical conductivity, high intrinsic activity, rich active sites, and porous architecture are also summarized. Next, some representative large-current-density electrocatalysts are classified. Finally, we discuss the challenges associated with large-current-density water electrolysis and future pathways in the hope of guiding the future development of more efficient non-noble-metal catalysts to boost large-scale hydrogen production with less electricity consumption.

Insights into Antiperovskite Ni3 In1-x Cux N Multi-Crystalline Nanoplates and Bulk Cubic Particles as Efficient Electrocatalysts on Hydrogen Evolution Reaction

Intrinsic hydrogen evolution reaction (HER) activity and the mechanism of antiperovskite Ni₃ In_1-x Cu_x N bulk cubic particles and multi-crystalline nanoplates are thoroughly investigated. Stoichiometric Ni₃ In_0.6 Cu_0.4 N reaches the best HER performance, with an overpotential of 102 mV in its multi-crystalline nanoplates obtained from the LDH-derived method, and 143 mV in its bulk cubic particles from the citric method. DFT calculation reveals that Ni-In or Ni-Cu paired on the (100) plane serve as primary active sites. The Ni-Cu pair exhibits stronger OH* and H* affinity that correspondingly reduce OH* and H* adsorption free energy. Introducing specific amounts of the Ni-Cu pair, that is In:Cu = 0.6:0.4 in Ni₃ In_0.6 Cu_0.4 N, can optimize OH* and H* adsorption free energy to facilitate water dissociation in the HER process, while avoiding OH* adsorption getting too strong to block active sites. Besides, Ni₃ In_0.6 Cu_0.4 N turns the water adsorption step spontaneous, which may be attributed to the shifted d-band center and polarizing effect from surface In-Cu charge distribution. This work expands the scope for material design in an antiperovskite system by tailoring the chemical components and morphology for optimal reaction free energy and performance.

In Situ/Operando Insights into the Stability and Degradation Mechanisms of Heterogeneous Electrocatalysts

The further commercialization of renewable energy conversion and storage technologies requires heterogeneous electrocatalysts that meet the exacting durability target. Studies of the stability and degradation mechanisms of electrocatalysts are expected to provide important breakthroughs in stability issues. Accessible in situ/operando techniques performed under realistic reaction conditions are therefore urgently needed to reveal the nature of active center structures and establish links between the structural motifs in a catalyst and its stability properties. This review highlights recent research advances regarding in situ/operando techniques and improves the understanding of the stabilities of advanced heterogeneous electrocatalysts used in a diverse range of electrochemical reactions; it also proposes some degradation mechanisms. The review concludes by offering suggestions for future research.

FeMo–N nanosheet arrays supported on nickel foam for efficient electrocatalytic N2 reduction to NH3 under ambient conditions

The N content in the M–N bond is closely related to the catalytic activity and greatly improves the NRR performance.

Nitrogen-doped carbon encapsulating RuCo heterostructure for enhanced electrocatalytic overall water splitting

The kinetically sluggish electrochemical water splitting reaction still faces great challenges, and the rational design of excellent electrocatalysts is the key to solving the problem. Herein, an etching and pyrolysis...

Ni2P nanowire arrays grown on Ni foam as an efficient monolithic cocatalyst for visible light dye-sensitized H2 evolution

Nanostructured H2 evolution cocatalysts are able to promote charge separation and thus enhance the efficiency of the photocatalytic H2 evolution reaction (HER). However, the nanosized cocatalyst particles are easily detached...

Atomically Dispersed Mo Sites Anchored on Multichannel Carbon Nanofibers toward Superior Electrocatalytic Hydrogen Evolution

Developing affordable and efficient electrocatalysts as precious metal alternatives toward the hydrogen evolution reaction (HER) is crucially essential for the substantial progress of sustainable H₂ energy-related technologies. The dual manipulation of coordination chemistry and geometric configuration for single-atom catalysts (SACs) has emerged as a powerful strategy to surmount the thermodynamic and kinetic dilemmas for high-efficiency electrocatalysis. We herein rationally designed N-doped multichannel carbon nanofibers supporting atomically dispersed Mo sites coordinated with C, N, and O triple components (labeled as Mo@NMCNFs hereafter) as a superior HER electrocatalyst. Systematic characterizations revealed that the local coordination microenvironment of Mo is determined to be a Mo-O₁N₁C₂ moiety, which was theoretically probed to be the energetically favorable configuration for H intermediate adsorption by density functional theory calculations. Structurally, the multichannel porous carbon nanofibers with open ends could effectively enlarge the exposure of active sites, facilitate mass diffusion/charge transfer, and accelerate H₂ release, leading to promoted reaction kinetics. Consequently, the optimized Mo@NMCNFs exhibited superior Pt-like HER performance in 0.5 M H₂SO₄ electrolyte with an overpotential of 66 mV at 10 mA cm^-2, a Tafel slope of 48.9 mV dec^-1, and excellent stability, outperforming a vast majority of the previously reported nonprecious HER electrocatalysts. The concept of both geometric and electronic engineering of SACs in this work may provide guidance for the design of high-efficiency molecule-like heterogeneous catalysts for a myriad of energy technologies.