Perfluoroalkyl-Functionalized Covalent Organic Frameworks with Superhydrophobicity for Anhydrous Proton Conduction

In-Situ Gelled Covalent Organic Framework Membrane with Vacancies-Enhanced Anhydrous Proton Conductivity

The development of high-performance anhydrous proton-exchange membranes (APEMs) for electrochemical techniques remains a significant challenge. Covalent organic frameworks (COFs) offer a promising solution for APEMs due to their tunable channels and functionalizable skeletons. However, COFs are typically porous powders, which create extreme difficulties in processing them into self-standing APEMs, thereby limiting their practical applications. In this study, we propose a novel strategy for preparing COF-based APEMs for high-temperature proton exchange membrane fuel cell (HT-PEMFC) applications through acidification and gelation. In the gel, COF acts as both a gelling agent and proton trap, inhibits guest acid flow, and captures protons from the acid, leading to the formation of proton vacancies in the COF gel and greatly accelerating proton migration. As a result, COF gel membranes exhibit conductivities that far surpass that of the guest acid itself, exceeding 0.1 S cm-1 at temperatures above 140 °C, outperforming most reported COF materials. Notably, membrane electrode assemblies of HT-PEMFCs fabricated with a COF gel achieve a maximum power density of 150 mW cm-2 at 180 °C and anhydrous conditions. Our approach introduces an innovative strategy for the fabrication of self-standing COF-based APEMs, representing a significant breakthrough in the field of COF-based APEMs for fuel cell technology.

In Situ Polymerization of Long Alkyl Chain Functional Groups Enhances the Oil-Water Separation Performance of Porous Organic Polymers

The preparation of superhydrophobic functional materials is of great significance for applications in oil pollution control. However, the materials synthesized by traditional post-modification methods usually suffer from problems of limited active sites, uneven distribution, and susceptibility of the surface structure to external factors, which may significantly affect their superhydrophobic properties. In this study, the superhydrophobic porous organic polymer LNU-32 was successfully prepared via in situ polymerization with the introduction of green, low-surface-energy, long-alkyl-chain functional groups into the pores, which formed a "brush-like" structure on the pore surface of the polymer and effectively enhanced its hydrophobicity. The LNU-32 material exhibits excellent superhydrophobicity, with a water contact angle of more than 151°. In addition, the superhydrophobic polyester fabric prepared from LNU-32 has an oil-water separation efficiency of more than 90%. The adsorption capacity of the superhydrophobic fabric for dimethicone also reached 7.37 times its own weight. The study shows that the LNU-32 material exhibits good application potential in the field of oil-water separation, especially in the treatment of oily wastewater and oil spills.

Functionalized magnetic covalent organic frameworks with refining tunable cores for highly selective adsorption of immunosuppressive drugs

Immunosuppressant drugs (ISDs) are widely used in the treatment of organ rejection following human transplantation and in autoimmune diseases. Herein, this study demonstrates that carbonylated covalent organic frameworks (COFs) with pore-matching capabilities can serve as promising interference-resistant adsorbents for the rapid and efficient capture of ISDs (cyclosporin A (CsA), tacrolimus (FK-506), and rapamycin (RPM)) from complex whole blood matrices. Under optimized conditions, MCOF-2-COOH, with a pore size 1.5 times the diameter of the drug molecule, demonstrated superior ISDs adsorption performance, achieving an adsorption capacity of up to 84.95 mg g-1 in 10 min. Instrumental characterization and theoretical calculations elucidated the potential adsorption matrix, revealing that the COF provides multiple forces, including hydrogen bonding, electrostatics, and π-π interactions, with the carboxyl site playing a crucial role. This study provides both a theoretical basis and experimental evidence for the use of COF materials in the selective adsorption of drugs from complex matrices, as well as a strategy for designing functionally customized COFs for drug therapy monitoring applications.

Fluorinated Covalent Organic Framework Antifouling Nanofiltration Membranes Through Defect Engineering

Covalent organic framework (COF) membrane holds great promise in water treat-ment. Improving the antifouling property of COF membrane is critical for practical application while rare investigations have been reported. Grafting fluorinated chains on the COF membrane surface is expected an effective strategy but quite challenging due to the lack of grafting sites. In this work, the defect engineering strategy is adopted to generate free amino groups as grafting sites through the Schiff-base reaction between amine monomer and mixed aldehyde monomers, then perfluoroalkyl chains are grafted on the COF membrane surface through the reaction between the free amino groups and the perfluorooctanoyl chloride. The content of perfluoroalkyl chains can be regulated and optimized by controlling the amount of free amino groups. The fluorinated COF membrane shows superior antifouling performance with a significantly increased flux recovery ratio and reduced flux decline ratio against oil/water emulsions and humic acid (FRR ≈ 98%, DRt = 10%). Furthermore, the fluorinated COF membrane exhibits high water permeance up to ≈115 L m-2 h-1 bar-1 while acquiring a high salt/dye selective factor. This work affords an effective approach to the development of antifouling, high-separation-performance COF membranes, and other kinds of organic molecular sieve membranes.

Skeleton Regulation of Covalent-Organic Frameworks From 2D to 3D Networks for High Anhydrous Proton Conduction

Developing new materials for anhydrous proton conduction under high-temperature conditions is very challenging but significant for proton exchange membrane fuel cells. Herein, a series of highly crystalline and robust covalent-organic frameworks (COFs) with different skeletons (2D and 3D) is designed and synthesized using steric hindrance engineering of the monomer. Moreover, a [4 + 2] construction approach is used to construct 3D COFs with entangled networks, which can be further post-modified with phosphite acid groups to improve intrinsic proton conduction. After loading with imidazole, COFs can realize a proton conductivity of 1.06 × 10-2 S cm-1 under anhydrous conditions, among the best proton-conducting COF materials loading imidazole. These materials show high stability at loading and testing conditions and maintain high proton conductivity over a wide temperature range (100-160 °C). This work provides a skeleton regulation approach to design materials for anhydrous proton conduction, showing great potential as high-temperature proton exchange membranes.

Confining Phosphoric Acid in Quaternized COF Channels for Ultra-Stable and Fast Anhydrous Proton Transport

Phosphoric acid (H3PO4) doping is a widely employed strategy to facilitate anhydrous proton transport in high-temperature proton exchange membrane fuel cells (HT-PEMFCs). However, significant H3PO4 leaching during long-term operation poses critical challenges to maintaining membrane stability and proton conductivity. Herein, H3PO4 is incorporated into positively charged nanochannels of quaternized covalent organic framework membranes (QACOFMs), leveraging strong electrostatic interactions and confinement effects to achieve exceptional H3PO4 retention under hydration conditions. Moreover, the shortened hydrogen bond length between H3PO4 (O-H…O <2.7 Å) and the highly interconnected hydrogen bond network in the H3PO4@QACOFMs facilitate ultra-fast anhydrous proton transport. As a result, the H3PO4@QACOFMs exhibit superior anhydrous proton transport in a broader temperature range (60 °C-200 °C) and the highest proton conductivity reaches about 379.7 mS cm-1 at 200 °C.

Functional crystalline porous framework materials based on supramolecular macrocycles

Crystalline porous framework materials like metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) possess periodic extended structures, high porosity, tunability and designability, making them good candidates for sensing, catalysis, gas adsorption, separation, etc. Despite their many advantages, there are still problems affecting their applicability. For example, most of them lack specific recognition sites for guest uptake. Supramolecular macrocycles are typical hosts for guest uptake in solution. Macrocycle-based crystalline porous framework materials, in which macrocycles are incorporated into framework materials, are growing into an emerging area as they combine reticular chemistry and supramolecular chemistry. Organic building blocks which incorporate macrocycles endow the framework materials with guest recognition sites in the solid state through supramolecular interactions. Distinct from solution-state molecular recognition, the complexation in the solid state is ordered and structurally achievable. This allows for determination of the mechanism of molecular recognition through noncovalent interactions while that of the traditional recognition in solution is ambiguous. Furthermore, crystalline porous framework materials in the solid state are well-defined and recyclable, and can realize what is impossible in solution. In this review, we summarize the progress of the incorporation of macrocycles into functional crystalline porous frameworks (i.e., MOFs and COFs) for their solid state applications such as molecular recognition, chiral separation and catalysis. We focus on the design and synthesis of organic building blocks with macrocycles, and then illustrate the applications of framework materials with macrocycles. Finally, we propose the future directions of macrocycle-based framework materials as reliable carriers for specific molecular recognition, as well as guiding the crystalline porous frameworks with their chemistry, applications and commercialization.

The Incorporation of Nanoconfined Poly(ionic liquid)s with Two-Dimensional Covalent Organic Frameworks to Enhance Proton Conduction

Covalent organic frameworks (COFs) hold promising potential as high-temperature proton conductors due to their highly ordered nanostructures and high specific surface areas. However, due to their limited functional groups and poor membrane-engineering properties, finding practical applications for COF-based proton-conducting materials still remains challenging. Herein, we proposed a universal strategy to fabricate proton-conducting composite membranes by the incorporation of sulfonic acid-bearing COFs and zwitterionic poly(ionic liquid)s (PILs) via in situ polymerization. Zwitterionic PILs with methanesulfonate counter ions can work as the intrinsic proton sources, and the sulfonic acid groups on the COF nanochannels can act as the extrinsic proton suppliers. Benefiting from the spatial nanoconfinement of long-range ordered nanochannels and the enhanced electrostatic interactions with PILs, the COFs with high densities of sulfonic acid groups can endow the as-prepared composite membrane (PIL@TpBD(SO3H)2) with a comparable anhydrous proton conductivity of 3.20 × 10-3 S cm-1 at 90 °C, which is much higher than that of conventional Nafion (~10-5 S cm-1 at 90 °C under anhydrous condition). 1H NMR DOSY spectra reveal that both the diffusion and dissociation of protons can be drastically facilitated upon nanoconfinement, demonstrating the promising efficiency of nanochannels in proton conduction. Moreover, the obtained composite membranes possess outstanding mechanical and thermal stability, which is crucial for their practical application. This study demonstrates proton conduction elevation in nanoconfined PILs and provides a promising insight into the engineering of stable COF-based proton-conducting materials.

Anhydrous Solid-State Proton Conduction in Crystalline MOFs, COFs, HOFs, and POMs

Strategic design of solid-state proton-conducting electrolytes for application in anhydrous proton-exchange membrane fuel cells (PEMFCs) has gained burgeoning interest due to a spectrum of advantageous features, including higher CO tolerance and ease in the water management systems. Toward this direction, crystalline materials like metal-organic frameworks (MOFs), covalent organic frameworks (COFs), hydrogen-bonded organic frameworks (HOFs), and polyoxometalates (POMs) are emerging PEM materials, offering strategic structural engineering through crystallography, thus enabling ultrahigh anhydrous proton conductivity up to 10-2-10-1 S/cm. This Perspective highlights significant progress achieved thus far with such crystalline platforms in the domain of anhydrous proton conduction across a wide temperature window (sub-zero to above 100 °C). Based on their structural backgrounds, these platforms are categorized into four classes (viz. MOFs, COFs, HOFs, and POMs) with a detailed evolutionary timeline since their emergence early in 2009. Insightful discussions with a key focus on the strategies undertaken to attain anhydrous proton conductivity along with implementation in fuel cell technology through membrane electrode assembly are presented. A section on "Critical Analysis and Future Prospects" provides decisive key viewpoints on those overlooked issues with future endorsement (e.g., performance assessment with CO tolerance analysis and fuel cell test stand) for further development while comparing them with other anhydrous platforms from both academic and industrial perspectives.

Heteroatom-embedded Mellitic Triimido COFs for efficient proton conduction

Ionic covalent organic frameworks (iCOFs) are promising materials for energy storage devices due to their ionic functional groups, which facilitate ion transport, and their highly ordered pores of their frameworks, which provide ideal pathways for long-term ion transport under harsh electrochemical conditions. In this study, we attempted for the first time to synthesize an unprecedented iCOF using a heteroatom-embedded mellitic triimido COF framework that enables practical ion channels on the Angstrom scale. This iCOF was subsequently evaluated as an anhydrous proton-conducting material. The heterocyclic pyridine group of the 2,5-diaminopyridine (DAPy) linker plays an important role, not only as an AB stacking-inducing group but also as a proton acceptor that interacts with impregnated H3PO4. The resulting PA@MTI-DAPy-COF exhibited high proton conductivity of 3.68 × 10-2 S cm-1 at 150oC under anhydrous conditions. This work paves the way for constructing efficient proton-conducting channels by leveraging the stacking structure of COF skeletons.

Enhancing the Interfacial Stability of Thin Solid Polymer Electrolyte with Fluorinated Covalent Organic Framework Nanosheets

Thin poly(ethylene oxide) (PEO)-based electrolytes with higher energy density face challenges such as low ionic conductivity, deterioration of lithium dendrites, and severe side reactions. To address these issues, a surface modification strategy was developed to enhance the electrode-electrolyte interfacial stability by introducing fluorinated covalent organic framework nanosheets (CONs) to construct a thin PEO-based electrolyte with a mere 14 μm thickness. Characterization and DFT calculation indicated that the CON layer promotes concentration enrichment and averaging of free Li+ and mitigates side reactions at the interface. The electrode/electrolyte interface stability is significantly improved compared to the unmodified group (Li symmetric cells stabilized for more than 1000 h, and the full cell of LiFePO4∥Li exhibited a satisfactory capacity retention of 97.3% at 0.5 C after 150 cycles at 60 °C. This interface modification strategy provides a valuable reference for applying thin polymer electrolytes in high-energy solid-state lithium metal batteries.

Covalent organic frameworks and their composites as enhanced energy storage materials

The advancement in materials chemistry promoted the growth of energy storage systems such as capacitors, supercapacitors and batteries. Covalent organic frameworks and nanomaterials have significantly improved the performance of various energy storage systems. Because of the unique properties of these materials, like high surface area, tunable architectures, and enhanced conductivity, researchers have developed effective and durable energy storage solutions for multiple applications. These findings are significant for meeting the demand for reliable and sustainable energy storage materials in order to save energy for a better future of mankind. As the demand for reliable and sustainable energy storage materials is increasing, the scientific community is more focussed towards the development of covalent organic frameworks (COFs). The high surface area, thermal and chemical stability, structural tunability, porosity, and low density of COFs make them appropriate for energy storage applications. Their potential to produce advanced energy storage devices with better performance and durability is further reinforced by their ability to be customized for specific applications and amplified for conductive materials. This review covers the designs and synthetic techniques of COFs and their composites specifically suitable for energy storage uses. It further highlights their use as cathode and anode materials in supercapacitors, COF based electrolytes and batteries. The review further includes the flexibility and efficiency of COFs in energy storage applications. Furthermore, it addresses the challenges and their potential solutions regarding the use of COFs in energy storage devices. By providing a comprehensive understanding of the advantages and limitations of COFs, this review aims to inform and inspire future advancements in energy storage technologies.

Perhaloacylation of α-Carbonyl Sulfoxonium Ylides

A mild and efficient protocol for the perhaloacylation of α-carbonyl sulfoxonium ylides has been developed. The commercially available perfluoro- and perchloroacid anhydrides were used as acylating agents in catalyst- and additive-free reactions to access α-carbonyl-α'-perhaloacyl sulfoxonium ylides in high yields. The reaction offers a simple method to prepare valuable polyfluorinated organosulfur molecules.

Giant {Mo132} polyoxometalate isolated with diverse organic cations: a systematic proton conductivity study

The development of efficient and stable proton conductors is a pivotal area of research due to their transformative potential in alternative energy technologies. Recently, there has been a surge of interest in synthesizing proton conductors based on polyoxometalate (POM) materials, attributed to their highly negatively charged and oxygen-rich surfaces. In this study, we report on a highly water-soluble giant POM, (NH4)42[Mo132O372(CH3COO)30(H2O)72]·ca.300H2O·ca.10CH3COONH4 (designated as {Mo132}), which was rendered insoluble in water by exchanging its ammonium cations with larger organic cations, specifically histidinium, pyridinium, bipyridinium, and methyl viologen, resulting in His-Mo132, Py-Mo132, Bpy-Mo132 and MV-Mo132, respectively. These ion-exchanged compounds were thoroughly characterized through comprehensive spectral analyses, elemental analyses and microscopic studies. The substitution with organic cations containing nitrogen centres not only rendered {Mo132} insoluble, but also increased the number of proton hopping sites, thereby enhancing proton transport. Consequently, His-Mo132, Py-Mo132, Bpy-Mo132 and MV-Mo132 demonstrated impressive proton conductivity. Among these, Py-Mo132 stood out with a proton conductivity of 1.07 × 10-2 S cm-1 under 98% relative humidity at 80 °C. All four compounds exhibited proton conduction predominantly via the Grotthuss mechanism. Furthermore, stability assessments of these Mo132-based proton conductors were conducted under operational conditions to evaluate their performance in practical applications.

Perfluoroalkyl Functionalized Superhydrophobic Covalent Organic Frameworks for Excellent Oil-Water Membrane Separation and Anhydrous Proton Conduction

Rapid economic development has led to oil pollution and energy shortage. Membrane separation has attracted much attention due to its simplicity and efficiency in oil-water-separation. The development of membrane materials with enhanced separation properties is essential to improve the separation-efficiency. Proton exchange membrane fuel cells (PEMFCs) are expected to replace conventional engines due to their high-power-conversion rates and other favorable properties. Anhydrous-proton-conducting materials are vital components of PEMFCs. However, developing stable proton-conducting materials that exhibit high conductivity at varying temperatures remains challenging. Herein, two covalent organic frameworks (COFs) with long-side-chains are synthesized, and their corresponding COF@SSN membranes. Both membranes can effectively separate oil-water mixtures and water-in-oil emulsions. The TFPT-AF membrane achieves a maximum oil-flux of 6.05 × 105 g h-1 m-2 with an oil-water separation efficiency of above 99%, which is almost unchanged after 20 consecutive uses. COF@H3PO4 doped with different ratios of H3PO4 is prepared, the results show that the perfluorocarbon-chain system has  excellent anhydrous proton conductivity , achieving an ultra-high proton-conductivity of 3.98 × 10-1 S cm-1 at 125 °C. This study lays the foundation for tailor-made-functionalization of COF through pre-engineering and surface-modification, highlighting the great potential of COFs for oil-water separation and anhydrous-proton-conductivity.

Anisotropic membrane with high proton conductivity sustaining upon dehydration

In fuel cells and electrolyzers, suboptimal proton conductivity and its dramatic drop at low humidity remain major drawbacks in proton exchange membranes (PEMs), including current benchmark Nafion. Sustained through-plane (TP) alignment of nanochannels was proposed as a remedy but proved challenging. We report an anisotropic composite PEM, mimicking the water-conductive composite structure of bamboo that meets this challenge. Micro- and nanoscale alignment of conductive pathways is achieved by in-plane thermal compression of a mat composed of co-electrospun Nafion and poly(vinylidene fluoride) (PVDF) nanofibers stabilizing the alignment. This translates to pronounced TP-enhanced proton conductivity, twice that of pure Nafion at high humidity, 13 times larger at low humidity, and 10 times larger water diffusivity. This remarkable improvement is elucidated by molecular dynamics simulations, which indicate that stronger nanochannels alignment upon dehydration compensates for reduced water content. The presented approach paves the way to overcoming the major drawbacks of ionomers and advancing the development of next-generation membranes for energy applications.

H3PO4-Impregnated Covalent Organic Framework Membrane on Separators to Prevent Lithium Metal Anode Dendrite Growth

Inhibiting the growth of lithium dendrites is crucial for battery safety. For separators, their favorable electrolyte wettability, uniform current density, and high ionic conductivity are beneficial for avoiding Li dendrite growth. In this work, we propose a separator (PA@COF/PP) by modifying a polypropylene separator with H3PO4-functionalized covalent organic frameworks. The uniform channels of the covalent organic frameworks and H3PO4 can homogenize the current and act as ionic conductors for efficient Li+ migration. The synthesized separator effectively suppresses the growth of lithium dendrites and improves the stability of the batteries. A symmetric cell with the PA@COF/PP separator exhibits a stable life span over 4000 hours at a high current density of 5 mA cm-2, compared to the commercial PP separator, which lasts only 159 hours. This work provides an efficient method and novel inspiration for the construction of dendrite-free lithium metal batteries.

Synthesis of Ultrahigh Molecular Weight Poly (Trifluoroethyl Methacrylate) Initiated by the Combination of Palladium Nanoparticles with Organic Halides

Ultrahigh molecular weight polymers display outstanding properties and have great application potential. However, the traditional polymerization methods have inevitable disadvantages that challenge the green synthesis of ultrahigh molecular weight polymers. The paper achieved an ultrahigh molecular weight poly (trifluoroethyl methacrylate) via a novel polymerization and discussed the mechanistic, kinetic, and experimental aspects. The combination of palladium nanoparticles with ethyl 2-bromopropionate has been identified as an exceedingly efficient system for initiating the polymerization of trifluoroethyl methacrylate. An ultrahigh molecular weight poly (trifluoroethyl methacrylate) with a number-average molecular weight up to 3.03 × 106 Da has been synthesized at a feeding molar ratio of [poly (trifluoroethyl methacrylate)]/[ethyl 2-bromopropionate]/[palladium nanoparticles] = 3.95 × 104:756:1 at 70 °C. The reaction orders concerning palladium nanoparticles, ethyl 2-bromopropionate, and poly (trifluoroethyl methacrylate) were determined to be 0.59, 0.34, and 1.38, respectively. By analyzing a series of characterizations, we verified that the polymerization of poly (trifluoroethyl methacrylate) was initiated by the ethyl 2-bromopropionate residue radicals, which were generated from the interaction between palladium nanoparticles and ethyl 2-bromopropionate. The comparatively large size of the palladium nanoparticles provided a barrier to chain-growing radicals, promoting the synthesis of ultrahigh molecular weight polymers.

Oxygen- and proton-transporting open framework ionomer for medium-temperature fuel cells

Medium-temperature proton exchange membrane fuel cells (MT PEMFCs) operating at 100° to 120°C have improved kinetics, simplified thermal and water management, and broadened fuel tolerance compared with low-temperature PEMFCs. However, high temperatures lead to Nafion ionomer dehydration and exacerbate gas transportation limitations. Inspired by osmolytes found in hyperthermophiles, we developed α-aminoketone-linked covalent organic framework (COF) ionomers, interwoven with Nafion, to act as "breathable" proton conductors. This approach leverages synergistic hydrogen bonding to retain water, enhancing hydration and proton transport while reducing oxygen transport resistance. For commercial Pt/C, the MT PEMFCs achieved peak and rated power densities of 18.1 and 9.5 Watts per milligram of Pt at the cathode at 105°C fueled with H2 and air, marking increases of 101 and 187%, respectively, compared with cells lacking the COF.

Bioinspired multi-scale interface design for wet gas sensing based on rational water management

Natural organisms have evolved multi-scale wet gas sensing interfaces with optimized mass transport pathways in biological fluid environments, which sheds light on developing artificial counterparts with improved wet gas sensing abilities and practical applications. Herein, we highlighted current advances in wet gas sensing taking advantage of optimized mass transport pathways endowed by multi-scale interface design. Common moisture resistance (e.g., employing moisture resistant sensing materials, post-modifying moisture resistant coatings, physical heating for moisture resistance, and self-removing hydroxyl groups) and moisture absorption (e.g., employing moisture absorption sensing materials and post-modifying moisture absorption coatings) strategies for wet gas sensing were discussed. Then, the design principles of bioinspired multi-scale wet gas sensing interfaces were provided, including macro-level condensation mediation, micro/nano-level transport pathway adjustment and molecular level moisture-proof design. Finally, perspectives on constructing bioinspired multi-scale wet gas sensing interfaces were presented, which will not only deepen our understanding of the underlying principles, but also promote practical applications.

Ultrafine Spatial Modulation of Diazapyrene-Based Two-Dimensional Conjugated Covalent Organic Frameworks

Tailormade bottom-up synthesis of covalent organic frameworks (COFs) from various functional building blocks offer not only tunable topology and pore size but also multidimensional properties. High crystallinity is one of the prerequisites for their structures and associated physicochemical properties. Among different π-conjugated motifs for constructing COFs, pyrene-based tetragonal structures are effective in achieving highly ordered and crystalline states. In the present research, we demonstrated that the substitution of pyrene with 2,7-diazapyrene produces nearly "flat" structures of two-dimensional (2D) COF layers by controlling the torsional angle of linker molecules. Featuring finite pore diameters and excellent thermodynamic stability of ∼500 °C, ordered face-to-face (slipped AA) stacking arrangements were produced. Extended electrical conjugation spanning 2D frames with modest optical bandgaps (Eg) of ∼2.1 eV shows the planar character of diazapyrene-based COFs. The stacking of the conjugated 2D frames with small Eg values is also beneficial for the formation of highly stable conducting pathways in the crystalline state, which was confirmed by the results of the microwave conductivity measurements. Nitrogen centers in diazapyrene units also play a key role as the active sites for proton transfer, and the maximum proton conductivity of σ = 10-2 S cm-1 was achieved along the cocontinuous nanopore structures surrounded by the active sites. Results show that tetragonal COFs based on diazapyrene can be used as a highly crystalline two-dimensional material with special electrical and proton-conducting capabilities.

Accelerating Anhydrous Proton Transport in Covalent Organic Frameworks: Pore Chemistry and its Impacts

Proton conduction is important in both fundamental research and technological development. Here we report designed synthesis of crystalline porous covalent organic frameworks as a new platform for high-rate anhydrous proton conduction. By developing nanochannels with different topologies as proton pathways and loading neat phosphoric acid to construct robust proton carrier networks in the pores, we found that pore topology is crucial for proton conduction. Its effect on increasing proton conductivity is in an exponential mode other than linear fashion, endowing the materials with exceptional proton conductivities exceeding 10-2 S cm-1 over a broad range of temperature and a low activation energy barrier down to 0.24 eV. Remarkably, the pore size controls conduction mechanism, where mesopores promote proton conduction via a fast-hopping mechanism, while micropores follow a sluggish vehicle process. Notably, decreasing phosphoric acid loading content drastically reduces proton conductivity and greatly increases activation energy barrier, emphasizing the pivotal role of well-developed proton carrier network in proton transport. These findings and insights unveil a new general and transformative guidance for designing porous framework materials and systems for high-rate ion conduction, energy storage, and energy conversion.

Hydrazone-Linked Covalent Organic Frameworks

Hydrazone-linked covalent organic frameworks (COFs) with structural flexibility, heteroatomic sites, post-modification ability and high hydrolytic stability have attracted great attention from scientific community. Hydrazone-linked COFs, as a subclass of Schiff-base COFs, was firstly reported in 2011 by Yaghi's group and later witnessed prosperous development in various aspects. Their adjustable structures, precise pore channels and plentiful heteroatomic sites of hydrazone-linked structures possess much potential in diverse applications, for example, adsorption/separation, chemical sensing, catalysis and energy storage, etc. Up to date, the systematic reviews about the reported hydrazone-linked COFs are still rare. Therefore, in this review, we will summarize their preparation methods, characteristics and related applications, and discuss the opportunity or challenge of hydrazone-linked COFs. We hope this review could provide new insights about hydrazone-linked COFs for exploring more appealing functions or applications.

Exceptional Anhydrous Proton Conduction in Covalent Organic Frameworks

Covalent organic frameworks (COFs) offer an irreplaceable platform for mass transport, as they provide aligned one-dimensional channels as pathways. Especially, proton conduction is of great scientific interest and technological importance. However, unlike proton conduction under humidity, anhydrous proton conduction remains a challenge, as it requires robust materials and proceeds under harsh conditions. Here, we report exceptional anhydrous proton conduction in stable crystalline porous COFs by integrating neat phosphoric acid into the channels to form extended hydrogen-bonding networks. The phosphoric acid networks in the pores are stabilized by hierarchical multipoint and multichain hydrogen-bonding interactions with the 3D channel walls. We synthesized five hexagonal COFs that possess different pore sizes, which are gradually tuned from micropores to mesopores. Remarkably, mesoporous COFs with a high pore volume exhibit an exceptional anhydrous proton conductivity of 0.31 S cm-1, which marks the highest conductivity among all examples reported for COFs. We observed that the proton conductivity is dependent on the pore volume, pore size, and content of phosphoric acid. Increasing the pore volume improves the proton conductivity in an exponential fashion. Remarkably, changing the pore volume from 0.41 to 1.60 cm3 g-1 increases the proton conductivity by 1150-fold. Interestingly, as the pore size increases, the activation energy barrier of proton conduction decreases in linear mode. The mesopores enable fast proton hopping across the channels, while the micropores follow sluggish vehicle conduction. Experiments on tuning phosphoric acid loading contents revealed that a well-developed hydrogen-bonding phosphoric acid network in the pores is critical for proton conduction.

Covalent Bonding of MXene/COF Heterojunction for Ultralong Cycling Li-Ion Battery Electrodes

Covalent organic frameworks (COFs) have emerged as promising renewable electrode materials for LIBs and gained significant attention, but their capacity has been limited by the densely packed 2D layer structures, low active site availability, and poor electronic conductivity. Combining COFs with high-conductivity MXenes is an effective strategy to enhance their electrochemical performance. Nevertheless, simply gluing them without conformal growth and covalent linkage restricts the number of redox-active sites and the structural stability of the composite. Therefore, in this study, a covalently assembled 3D COF on Ti3C2 MXenes (Ti3C2@COF) is synthesized and serves as an ultralong cycling electrode material for LIBs. Due to the covalent bonding between the COF and Ti3C2, the Ti3C2@COF composite exhibits excellent stability, good conductivity, and a unique 3D cavity structure that enables stable Li+ storage and rapid ion transport. As a result, the Ti3C2-supported 3D COF nanosheets deliver a high specific capacity of 490 mAh g-1 at 0.1 A g-1, along with an ultralong cyclability of 10,000 cycles at 1 A g-1. This work may inspire a wide range of 3D COF designs for high-performance electrode materials.

Rational Design of Organic Electrocatalysts for Hydrogen and Oxygen Electrocatalytic Applications

Efficient electrocatalysts are pivotal for advancing green energy conversion technologies. Organic electrocatalysts, as cost-effective alternatives to noble-metal benchmarks, have garnered attention. However, the understanding of the relationships between their properties and electrocatalytic activities remains ambiguous. Plenty of research articles regarding low-cost organic electrocatalysts started to gain momentum in 2010 and have been flourishing recently though, a review article for both entry-level and experienced researchers in this field is still lacking. This review underscores the urgent need to elucidate the structure-activity relationship and design suitable electrode structures, leveraging the unique features of organic electrocatalysts like controllability and compatibility for real-world applications. Organic electrocatalysts are classified into four groups: small molecules, oligomers, polymers, and frameworks, with specific structural and physicochemical properties serving as activity indicators. To unlock the full potential of organic electrocatalysts, five strategies are discussed: integrated structures, surface property modulation, membrane technologies, electrolyte affinity regulation, and addition of anticorrosion species, all aimed at enhancing charge efficiency, mass transfer, and long-term stability during electrocatalytic reactions. The review offers a comprehensive overview of the current state of organic electrocatalysts and their practical applications, bridging the understanding gap and paving the way for future developments of more efficient green energy conversion technologies.

Superlative Porous Organic Polymers for Photochemical and Electrochemical CO2 Reduction Applications: From Synthesis to Functionality

To mimic the carbon cycle at a kinetically rapid pace, the sustainable conversion of omnipresent CO2 to value-added chemical feedstock and hydrocarbon fuels implies a remarkable prototype for utilizing released CO2. Porous organic polymers (POPs) have been recognized as remarkable catalytic systems for achieving large-scale applicability in energy-driven processes. POPs offer mesoporous characteristics, higher surface area, and superior optoelectronic properties that lead to their relatively advanced activity and selectivity for CO2 conversion. In comparison to the metal organic frameworks, POPs exhibit an enhanced tendency toward membrane formation, which governs their excellent stability with regard to remarkable ultrathinness and tailored pore channels. The structural ascendancy of POPs can be effectively utilized to develop cost-effective catalytic supports for energy conversion processes to leapfrog over conventional noble metal catalysts that have nonlinear techno-economic equilibrium. Herein, we precisely surveyed the functionality of POPs from scratch, classified it, and provided a critical commentary of its current methodological advancements and photo/electrochemical achievements in the CO2 reduction reaction.

Interface engineering in a nitrogen-rich COF/BiOBr S-scheme heterojunction triggering efficient photocatalytic degradation of tetracycline antibiotics

Tetracycline (TC) antibiotics, extensively utilized in livestock farming and aquaculture, pose significant environmental challenges. Photocatalysis, leveraging renewable sunlight and reusable photocatalysts, offers a promising avenue for mitigating TC pollution. However, identifying robust photocatalysts remains a formidable challenge. This study introduces a novel hollow-flower-ball-like nanoheterojunction composed of a nitrogen-rich covalent organic framework (N-COF) coupled with BiOBr (BOB), a semiconductor with a higher Fermi level. The synthesized N-COF/BOB S-scheme nanoheterojunction features an expanded contact interface, strengthened chemical bonding, and unique band topologies. The N-COF/BOB composites showcased exceptional TC degradation performance, achieving an 81.2% removal of 60 mg/L TC within 2 h, markedly surpassing the individual efficiencies of N-COF and BOB by factors of 3.80 and 5.96, respectively. Furthermore, the total organic carbon (TOC) removal efficiency highlights a superior mineralization capacity in the N-COF/BOB composite compared to the individual components, N-COF and BOB. The toxicity assessment revealed that the degradation intermediates possess diminished environmental toxicity. This enhanced performance is ascribed to the robust S-scheme nanoheterojunction structure, which promotes efficient photoinduced electron transfer from BOB to N-COF. This process also augments the separation of photogenerated charge carriers, resulting in an increased yield of superoxide radicals (∙O2-) and hydroxyl radicals (∙OH). These reactive species significantly contribute to the degradation and mineralization of TC. Consequently, this study introduces a sustainable approach for addressing emerging antibiotic contaminants, employing COF-based photocatalysts.

"All in One" Strategy for Achieving Superprotonic Conductivity by Incorporating Strong Acids into a Robust Imidazole-Linked Covalent Organic Framework

The fabrication of solid-state proton-conducting electrolytes possessing both high performance and long-life reusability is significant but challenging. An "all-in-one" composite, H3PO4@PyTFB-1-SO3H, including imidazole, sulfonic acid, and phosphoric acid, which are essential for proton conduction, was successfully prepared by chemical post-modification and physical loading in the rationally pre-synthesized imidazole-based nanoporous covalent organic framework (COF), PyTFB-1. The resultant H3PO4@PyTFB-1-SO3H exhibits superhigh proton conductivity with its value even highly up to 1.15 × 10-1 S cm-1 at 353 K and 98% relative humidity (RH), making it one of the highest COF-based composites reported so far under the same conditions. Experimental studies and theoretical calculations further confirmed that the imidazole and sulfonic acid groups have strong interactions with the H3PO4 molecules and the synergistic effect of these three groups dramatically improves the proton conductivity properties of H3PO4@PyTFB-1-SO3H. This work demonstrated that by aggregating multiple proton carriers into one composite, effective proton-conducting electrolyte can be feasibly achieved.

A Stimuli-Responsive Dual-Emitting Covalent Organic Framework Shows Selective Sensing of Highly Corrosive Acidic Media via Fluorescence Turn-On Signal with White Light Emission

Luminescent covalent organic frameworks (LCOFs) have been employed as platforms for sensing analytes. Judicial incorporation of appropriate functional units inside the framework leads to the different electronic states in the presence of external stimuli, e.g., temperature, pH, etc. We report herein a new COF (TPEPy) as a solid-state acid sensor specific for the highly acidic environments that range from pH ∼0.5 to ∼3.0. This COF shows a protonation-induced reversible color change from bright yellow to deep red upon decreasing the pH from 3 to 0.5 and vice versa. No visual color change was, however, observed above pH 3.0. Photoluminescence (PL) studies show that the intrinsic emission peak of the TPEPy COF at 530 nm is shifted to 420 nm owing to the N-protonation of the imine nitrogen of COF within this pH range. Extensive studies demonstrate that the protonation behavior of the COF is counterion dependent. This was revealed when different acids, e.g., HCl, HNO3, HBr, and HI, were employed. The intensity of the proton-induced emission peak at 420 nm depends significantly upon the counterions with the order of HCl > HNO3 > HBr > HI. These anions interact with the protonated TPEPy COF by cation-anion and H-bonding interactions. Further, the pristine COF showed near white light emission at a particular pH of 2.5 (CIE coordinates 0.27, 0.32). From the PL spectrophotometric titrations, the deprotonation pKa was experimentally found to be 1.8 ± 0.02 for the TPEPy COF. The sensor reported herein is reversible, reusable, and regenerable and is useful for assessing pH fluctuations within a strongly acidic range via digital signaling.

Acidified Nitrogen Self-Doped Porous Carbon with Superprotonic Conduction for Applications in Solid-State Proton Battery

Solid proton electrolytes play a crucial role in various electrochemical energy storage and conversion devices. However, the development of fast proton conducting solid proton electrolytes at ambient conditions remains a significant challenge. In this study, a novel acidified nitrogen self-doped porous carbon material is presented that demonstrates exceptional superprotonic conduction for applications in solid-state proton battery. The material, designated as MSA@ZIF-8-C, is synthesized through the acidification of nitrogen-doped porous carbon, specifically by integrating methanesulfonic acid (MSA) into zeolitic imidazolate framework-derived nitrogen self-doped porous carbons (ZIF-8-C). This study reveals that MSA@ZIF-8-C achieves a record-high proton conductivity beyond 10-2  S cm-1 at ambient condition, along with good long-term stability, positioning it as a cutting-edge alternative solid proton electrolyte to the default aqueous H2 SO4 electrolyte in proton batteries.

Hydrophobic Trinuclear Copper Cluster-Containing Organic Framework for Synergetic Electrocatalytic Synthesis of Amino Acids

Electrocatalytic synthesis of amino acids provides a promising green and efficient pathway to manufacture the basic substances of life. Herein, reaction of 2,5-perfluroalkyl-terepthalohydrazide and tris(4-µ2 -O-carboxaldehyde-pyrazolato-N, N')-tricopper affords a crystalline trinuclear copper cluster-containing organic framework, named F-Cu3 -OF. Incorporation of abundant hydrophobic perfluroalkyl groups inside the channels of F-Cu3 -OF is revealed to successfully suppress the hydrogen evolution reaction via preventing H+ cation with large polarity from the framework of F-Cu3 -OF and in turn increasing the adsorption of other substrates with relatively small polarity like NO3 - and keto acids on the active sites. The copper atoms with short distance in the trinuclear copper clusters of F-Cu3 -OF enable simultaneous activization of NO3 - and keto acids, facilitating the following synergistic and efficient C─N coupling on the basis of in situ spectroscopic investigations together with theoretical calculation. Combination of these effects leads to efficient electroproduction of various amino acids including glycine, alanine, leucine, valine, and phenylalanine from NO3 - and keto acids with a Faraday efficiency of 42%-71% and a yield of 187-957 µmol cm-2 h-1 , representing the thus far best performance. This work shall be helpful for developing economical, eco-friendly, and high-efficiency strategy for the production of amino acids and other life substances.

Proton-Conductive COF Evenly Embedded Cellulose Aerogels toward Water Harvesting and Spontaneous Sustained Power Generation from Ambient Moisture and Human Respiration

Herein, we develop a new intelligent moisture-sensitive hybrid aerogel by evenly embedding a proton-conductive covalent organic framework (COF-2SO3H) into a carboxylated cellulose nanofiber network (CNF-C) for water harvesting and spontaneous sustained electricity production from ambient humidity and human respiration. Our strategy first exploits the "suspending agent" role of CNF-C to stably disperse COF materials in water for forming uniform hierarchical hybrid structures. By utilizing the synergy of COF-2SO3H and CNF-C together with their inherent structure merits and surface group effects, the hybrid aerogel displays increased water uptake and ion conductivity. Upon asymmetric moisturization, it can create a self-maintained moisture gradient to engender a concentration difference for mobile Na+ and H+, resulting in efficient charge separation and diffusion. Thus, the hybrid aerogel-based coin-type generator achieves a continuous output voltage of ∼0.55 V for at least 5 h in ambient environments in contrast to that using pure CNF-C and carbon-based generators with transient voltage response. Intriguingly, the wearable generator with an aerogel in a mask is more sensitive to human respiration and achieves repeatable and reliable self-charge for persistent electricity along with an increased output voltage of up to 1.0 V and much faster self-charge (only 3 min), both of which surpass most reported moisture-enabled generators.

Bioinspired Heterogeneous Construction of Lignocellulose-Reinforced COF Membranes for Efficient Proton Conduction

The exponential interest in covalent organic frameworks (COFs) arises from the direct correlation between their diverse and intriguing properties and the modular design principle. However, the insufficient interlamellar interaction among COF nanosheets greatly hinders the formation of defect-free membranes. Therefore, developing a methodology for the facile fabrication of these materials remains an enticing and highly desirable objective. Herein, ultrahigh proton conductivity and superior stability are achieved by taking advantage of COF composite membranes where 2D TB-COF nanosheets are linked by 1D lignocellulosic nanofibrils (LCNFs) through π-π and electrostatic interactions to form a robust and ordered structure. Notably, the high concentration of -SO3 H groups within the COF pores and the abundant proton transport paths at COFs-LCNFs interfaces impart composite membranes ultrahigh proton conductivity (0.348 S cm-1 at 80 °C and 100% RH). Moreover, the directional migration of protons along the stacked nanochannels of COFs is facilitated by oxygen atoms on the keto groups, as demonstrated by density functional theory (DFT) calculations. The simple design concept and reliable operation of the demonstrated mixed-dimensional composite membrane are expected to provide an ideal platform for next-generation conductive materials.

Linkage conversions in single-crystalline covalent organic frameworks

Single-crystal X-ray diffraction is a powerful characterization technique that enables the determination of atomic arrangements in crystalline materials. Growing or retaining large single crystals amenable to it has, however, remained challenging with covalent organic frameworks (COFs), especially suffering from post-synthetic modifications. Here we show the synthesis of a flexible COF with interpenetrated qtz topology by polymerization of tetra(phenyl)bimesityl-based tetraaldehyde and tetraamine building blocks. The material is shown to be flexible through its large, anisotropic positive thermal expansion along the c axis (αc = +491 × 10-6 K-1), as well as through a structural transformation on the removal of solvent molecules from its pores. The as-synthesized and desolvated materials undergo single-crystal-to-single-crystal transformation by reduction and oxidation of its imine linkages to amine and amide ones, respectively. These redox-induced linkage conversions endow the resulting COFs with improved stability towards strong acid; loading of phosphoric acid leads to anhydrous proton conductivity up to ca. 6.0 × 10-2 S cm-1.

Manipulation of Cationic Group Density in Covalent Organic Framework Membranes for Efficient Anion Transport

Anion exchange membranes with high anion conductivity are highly desired for electrochemical applications. Increasing ion exchange capacity is a straightforward approach to enhancing anion conductivity but faces a challenge in dimensional stability. Herein, we report the design and preparation of three kinds of isoreticular covalent organic framework (COF) membranes bearing tunable quaternary ammonium group densities as anion conductors. Therein, the cationic groups are integrated into the backbones by flexible ether-bonded alkyl side chains. The highly quaternary ammonium-group-functionalized building units endow COF membranes with abundant cationic groups homogeneously distributed in the ordered channels. The flexible side chains alleviate electrostatic repulsion and steric hindrance caused by large cationic groups, ensuring a tight interlayer stacking and multiple interactions. As a result, our COF membranes achieve a high ion exchange capacity and exceptional dimensional stability simultaneously. Furthermore, the effect of the ionic group density on the ion conductivity in rigid COF channels is systematically explored. Experiments and simulations reveal that the ionic group concentration and side chain mobility jointly determine the ion transport behavior, resulting in the abnormal phenomenon that the anion conductivity is not positively correlated to the ionic group density. The optimal COF membrane achieves the ever-reported highest hydroxide ion conductivity over 300 mS cm-1 at 80 °C and 100% RH. This study offers insightful guidelines on the rational design and preparation of high-performance anion conductors.

Preparation of Well-Constructed and Metal-Modified Covalent Organic Framework Nanoparticles for Biosensing Design with Cascade Catalytic Capability

Uniform covalent organic framework nanoparticles (COF NPs) with a well-defined pore structure may provide a robust platform for scaffolding enzymes. Herein, bipyridine-based spherical COF NPs have been successfully prepared in this work through the Schiff base condensation reaction. Moreover, they are functionalized by metal modification and are further used for biosensor fabrication. Experimental results reveal that the metal-modified COF NPs also display impressive peroxidase-like catalytic activities, while they can load enzymes, such as glucose oxidase (GOx) and sarcosine oxidase (SOx), to develop a cascade catalysis system for design of various kinds of biosensors with very well performance. For example, the optimized GOx@Fe-COFs can achieve a sensitive detection of glucose with a low limit of detection (LOD) of 12.8 μM. Meanwhile, the enzymes also exhibit a commendable preservation of 80% enzymatic activity over a span of 14 days under ambient conditions. This work may pave the way for advancing cascade catalysis and the analysis of different kinds of biological molecules based on COF NPs.

A highly proton conductive perfluorinated covalent triazine framework via low-temperature synthesis

Proton-conducting materials are essential to the emerging hydrogen economy. Covalent triazine frameworks (CTFs) are promising proton-conducting materials at high temperatures but need more effective sites to strengthen interaction for proton carriers. However, their construction and design in a concise condition are still challenges. Herein, we show a low temperature approach to synthesize CTFs via a direct cyclotrimerization of aromatic aldehyde using ammonium iodide as facile nitrogen source. Among the CTFs, the perfluorinated CTF (CTF-TF) was successfully synthesized with much lower temperature ( ≤ 160 °C) and open-air atmosphere. Due to the additional hydrogen-bonding interaction between fluorine atoms and proton carriers (H3PO4), the CTF-TF achieves a proton conductivity of 1.82 × 10-1 S cm-1 at 150 °C after H3PO4 loading. Moreover, the CTF-TF can be readily integrated into mixed matrix membranes, displaying high proton conduction abilities and good mechanical strength. This work provides an alternative strategy for rational design of proton conducting media.

Quantitative Assessment of Crystallinity and Stability in β-Ketoenamine-Based Covalent Organic Frameworks

The design and synthesis of covalent organic frameworks (COFs) with high chemical stability pose significant challenges for practical applications. Although a growing number of robust COFs have been developed and employed for a broad scope of applications, the assessment of COF stability has primarily relied on qualitative descriptions, lacking a rational and quantitative assessment. Herein, a novel assessment method is presented that enables visual and quantitative depiction of COF stability. By analyzing the PXRD patterns of chemically stable β-ketoenamine-based COFs (KEA-COFs), two crystallinity-dependent parameters are identified, the relative intensity (I2θrel ) and the relative area (A2θrel ) of the main peak (2θ), which are expected to establish a standardized criterion for assessing COF crystallinity. Based on these parameters, the crystalline changes after stability tests can be visually presented, which provides a rational and quantitative assessment of their stability. This study not only demonstrates the remarkable chemical stability of KEA-COFs, but also provides valuable insights into the quantitative evaluation of COFs' crystallinity and stability.

Synthesizing Interpenetrated Triazine-based Covalent Organic Frameworks from CO2

Crystalline triazine-based covalent organic frameworks (COFs) are aromatic nitrogen-rich porous materials. COFs typically show high thermal/chemical stability, and are promising for energy applications, but often require harsh synthesis conditions and suffer from low crystallinity. In this work, we propose an environmentally friendly route for the synthesis of crystalline COFs from CO2 molecules as a precursor. The mass ratio of CO2 conversion into COFs formula unit reaches 46.3 %. The synthesis consists of two steps; preparation of 1,4-piperazinedicarboxaldehyde from CO2 and piperazine, and condensation of the dicarboxaldehyde and melamine to construct the framework. The CO2 -derived COF has a 3-fold interpenetrated structure of 2D layers determined by powder X-ray diffraction, high-resolution transmission electron microscopy, and select-area electron diffraction. The structure shows a high Brunauer-Emmett-Teller surface area of 945 m2  g-1 and high stability against strong acid (6 M HCl), base (6 M NaOH), and boiling water over 24 hours. Post-modification of the framework with oxone has been demonstrated to modulate hydrophilicity, and it exhibits proton conductivity of 2.5×10-2  S cm-1 at 85 °C, 95 % of relative humidity.

Recent advancements of covalent organic frameworks (COFs) as proton conductors under anhydrous conditions for fuel cell applications

Recent electrochemical energy conversion devices require more advanced proton conductors for their broad applications, especially, proton exchange membrane fuel cell (PEMFC) construction. Covalent organic frameworks (COFs) are an emerging class of organic porous crystalline materials that are composed of organic linkers and connected by strong covalent bonds. The unique characteristics including well-ordered and tailorable pore channels, permanent porosity, high degree of crystallinity, excellent chemical and thermal stability, enable COFs to be the potential proton conductors in fuel cell devices. Generally, proton conduction of COFs is dependent on the amount of water (extent of humidity). So, the constructed fuel cells accompanied complex water management system which requires large radiators and airflow for their operation at around 80 °C to avoid overheating and efficiency roll-off. To overcome such limitations, heavy-duty fuel cells require robust proton exchange membranes with stable proton conduction at elevated temperatures. Thus, proton conducting COFs under anhydrous conditions are in high demand. This review summarizes the recent progress in emerging COFs that exhibit proton conduction under anhydrous conditions, which may be prospective candidates for solid electrolytes in fuel cells.

Urchin-like fluorinated covalent organic frameworks decorated fabric for effective self-cleaning and versatile oil/water separation

Oil contamination and industrial organic pollutants emission have been a serious problem affecting the ecological and residential environment. Membrane-based separation shows great application prospect due to its low-cost, environmental-friendly and easy operation. Therefore, the development of efficient oil-water separation membranes is highly desirable. Herein, a fabric filter with superwettability was prepared by coating urchin-like fluorinated covalent organic frameworks (COFs) on fabric, which was well utilized in filtering immiscible oil-water mixture and surfactant-stabilized water-in-oil emulsion driven only by gravity for the first time. The as-prepared COF fabric filter (defined as fabric@u-FCOF) possessed many outstanding properties, including superhydrophobicity with the water contact angle of approximately 151.6°, satisfactory resistance for alkaline, acidic and saline environments, as well as superior mechanical durability under harsh conditions. Because of the super-micropore of fabric@u-FCOF and the nanopore in the COF coating, the obtained fabric@u-FCOF exhibited excellent performances in terms of separation efficiency and permeability, in which the oil flux was up to 16964 L·m-1·h-2 and separation efficiency for the mixed o-dichlorobenzene/water was higher than 99.4%. In addition, the fabric@u-FCOF also showed excellent self-cleaning performance due to the micro/nano hierarchical structure of its surface. These excellent properties make it an ideal candidate for applications of oil/water separation and water purification.

Water/Vapor Assisted Fabrication of Large-Area Superprotonic Conductive Covalent Organic Framework Membranes

Fabrication of large-area ionic covalent organic framework membranes (iCOMs) remains a grand challenge. Herein, the authors report the liquid water and water vapor-assisted fabrication of large-area superprotonic conductive iCOMs. A mixed monomer solution containing 1,3,5-triformylphloroglucinol (TFP) in 1,4-dioxane and p-diaminobenzenesulfonic acid (DABA) in water is first polymerized to obtain a pristine membrane which subsequently underwent crystallization process in mixed vapors containing water vapor. During the polymerization stage, water played a role of a diluting agent, weakening the Coulombic repulsion between sulfonic acid groups. During the crystallization stage, water vapor played a role of a structure-directing agent to facilitate the formation of highly crystalline, large-area iCOMs. The resulting membranes achieved a proton conductivity value of 0.76 S cm-1 at 90 °C under 100% relative humidity, which is among the highest ever reported. Using liquid water and water vapor as versatile additives open a novel avenue to the fabrication of large-area membranes from covalent organic frameworks and other kinds of crystalline organic framework materials.

Gradient Channel Segmentation in Covalent Organic Framework Membranes with Highly Oriented Nanochannels

Covalent organic frameworks (COFs) offer an exceptional platform for constructing membrane nanochannels with tunable pore sizes and tailored functionalities, making them promising candidates for separation, catalysis, and sensing applications. However, the synthesis of COF membranes with highly oriented nanochannels remains challenging, and there is a lack of systematic studies on the influence of postsynthetic modification reactions on functionality distribution along the nanochannels. Herein, we introduced a "prenucleation and slow growth" approach to synthesize a COF membrane featuring highly oriented mesoporous channels and a high Brunauer-Emmett-Teller surface area of 2230 m2 g-1. Functional moieties were anchored to the pore walls via "click" reactions and coordinated with Cu ions to serve as segmentation functions. This led to a remarkable H2/CO2 separation performance that surpassed the Robeson upper bound. Moreover, we found that the functionalities distributed along the nanochannels could be influenced by functionality flexibility and postsynthetic reaction rate. This strategy paved the way for the accurate design and construction of COF-based artificial solid-state nanochannels with high orientation and precisely controlled channel environments.

Gradually Tuning the Flexibility of Two-Dimensional Covalent Organic Frameworks via Stepwise Structural Transformation and Their Flexibility-Dependent Properties

Flexible covalent organic frameworks (COFs) are intriguing for their dynamic properties distinctive from rigid counterparts but still suffer from limited accessibility. Especially, controlling flexibility of COFs is challenging and the impact of different flexibility on properties of COFs has rarely been unveiled. This article reports stepwise adjustment on flexibility of two-dimensional COFs, which is realized by the designed synthesis of rigid COF (R-COF), semi-flexible COF (SF-COF), and flexible COF (F-COF) through polymerization, linker exchange, and linkage conversion with a newly developed method for reduction of hydrazone, respectively. Significant difference in breathing behavior and self-adaptive capability of the three COFs are uncovered through vapor response and iodine capture experiments. Gas sorption experiments indicate that the porosity of F-COF could switch from "close" state in nitrogen to "open" state in carbon dioxide, which are not observed for R-COF and SF-COF. This study not only develops a strategy to adjust the flexibility of COFs by tuning their linkers and linkages, but also provides a deep insight into the impact of different flexibility on properties of COFs, which lays a foundation for the development of this new class of dynamic porous materials.

Liquid-Liquid Phase Separation of Aqueous Ionic Liquids in Covalent Organic Frameworks for Thermal Switchable Proton Conductivity

Covalent organic frameworks (COFs) have regular channels that can accommodate guest molecules to provide highly conductive solid electrolytes. However, designing smart, conductive COFs remains a great challenge. Herein, we report the first example of PEG-functionalized ionic liquids (ILs) anchored on the COF walls by strong hydrogen bonding to fabricate thermally responsive COFs (ILm@COF). We found that similar to the traditional IL/water mixture, the ILs undergo lower critical solution temperature (LCST)-type phase behavior within COF nanopores under high moisture levels. However, the phase separation temperature of aqueous IL decreases in COF channels due to the strong interaction between the IL and COF. Thus, the proton conductivity of ILm@COF can be reversibly switched by phase miscibility and separation in COF nanopores, and there is no obvious decrease even after 20 switching cycles. Our work provides important clues for understanding liquid-liquid phase separation in a confined nanospace and opens a new pathway to switchable proton conductivity.

In silico screening of nanoporous materials for urea removal in hemodialysis applications

The design of miniaturized hemodialysis devices, such as wearable artificial kidneys, requires regeneration of the dialysate stream to remove uremic toxins from water. Adsorption has the potential to capture such molecules, but conventional adsorbents have low urea/water selectivity. In this work, we performed a comprehensive computational study of 560 porous crystalline adsorbents comprising mainly covalent organic frameworks (COFs), as well as some siliceous zeolites, metal organic frameworks (MOFs) and graphitic materials. An initial screening using Widom insertion method assessed the excess chemical potential at infinite dilution for water and urea at 310 K, providing information on the strength and selectivity of urea adsorption. From such analysis it was observed that urea adsorption and urea/water selectivity increased strongly with fluorine content in COFs, while other compositional or structural parameters did not correlate with material performance. Two COFs, namely COF-F6 and Tf-DHzDPr were explored further through Molecular Dynamics simulations. The results agree with those of the Widom method and allow to identify the urea binding sites, the contribution of electrostatic and van der Waals interactions, and the position of preferential urea-urea and urea-framework interactions. This study paves the way for a well-informed experimental campaign and accelerates the development of novel sorbents for urea removal, ultimately advancing on the path to achieve wearable artificial kidneys.

Recent Progress of Crystalline Porous Frameworks for Intermediate-Temperature Proton Conduction

Proton exchange membranes (PEMs), especially for work under intermediate temperatures (100-200 °C), have attracted great interest because of the high CO toleration and facial water management of the corresponding proton exchange membrane fuel cells (PEMFCs). Traditional polymer PEMs faced challenges of low stability and proton carrier leaking. Crystalline porous materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are promising to overcome these issues contributed by nanometer-sized channels. Herein we summarized the recent development of MOF/COF-based intermediate-temperature proton conductors. The strategies of framework engineering and pore impregnation were introduced in detail for raising proton conductivity. The proton-conducting mechanism was described as well. This spotlight will provide new insight into the fabrication of MOF/COF proton conductors under intermediate-temperature and anhydrous conditions.

PAF-6 Doped with Phosphoric Acid through Alkaline Nitrogen Atoms Boosting High-Temperature Proton-Exchange Membranes for High Performance of Fuel Cells

High-temperature proton-exchange-membrane fuel cells (HT-PEMFCs) can offer improved energy efficiency and tolerance to fuel/air impurities. The high expense of the high-temperature proton-exchange membranes (HT-PEMs) and their low durability at high temperature still impede their further practical applications. In this work, a phosphoric acid (PA)-doped porous aromatic framework (PAF-6-PA) is incorporated into poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (OPBI) to fabricate novel PAF-6-PA/OPBI composite HT-PEMs through solution-casting. The alkaline nitrogen structure in PAF-6 can be protonated with PA to provide proton hopping sites, and its porous structure can enhance the PA retention in the membranes, thus creating fast pathways for proton transfer. The hydrogen bond interaction between the rigid PAF-6 and OPBI can also enhance the mechanical properties and chemical stability of the composite membranes. Consequently, PAF-6-PA/OPBI exhibits an optimal proton conductivity of 0.089 S cm-1 at 200 °C, and peak power density of 437.7 mW cm-2 (Pt: 0.3 mg cm-2 ), which is significantly higher than that of the OPBI.   The PAF-6-PA/OPBI provides a novel strategy for the practical application of PBI-based HT-PEMs.

Recent Developments in Two-Dimensional Materials-Based Membranes for Oil-Water Separation

The industrialization witnessed in the last century has resulted in an unprecedented increase in water pollution. In particular, the water pollution induced by oil contaminants from oil spill accidents, as well as discharges from pharmaceutical, oil/gas, and metal processing industries, have raised concerns due to their potential to pose irreversible threats to the ecosystems. Therefore, the effective treating of these large volumes of oily wastewater is an inevitable challenge to address. Separating oil-water mixtures by membranes has been an attractive technology due to the high oil removal efficiency and low energy consumption. However, conventional oil-water separation membranes may not meet the complex requirements for the sustainable treatment of wastewater due to their relatively shorter life cycle, lower chemical and thermal stability, and permeability/selectivity trade-off. Recent advancements in two-dimensional (2D) materials have provided opportunities to address these challenges. In this article, we provide a brief review of the most recent advancements in oil-water separation membranes modified with 2D materials, with a focus on MXenes, graphenes, metal-organic frameworks, and covalent organic frameworks. The review briefly covers the backgrounds, concepts, fabrication methods, and the most recent representative studies. Finally, the review concludes by describing the challenges and future research directions.