Ultrastable High-Connected Chromium Metal-Organic Frameworks

Heterometallic Aluminum Metal-Organic Frameworks

From spinel gemstone (MgAl2O4) to layered double hydroxides, nature has long relied on combinations between charge-complementary metal ions such as divalent metal ions (M2+) and Al3+ to create diverse valuable materials. However, for metal-organic frameworks (MOFs), heterometallic combinations such as Mg-Al are conspicuously absent. Here, we report a breakthrough in the synthesis of heterometallic Al-MOFs containing M2+/Al3+ trimeric clusters (M = Mg, Mn, Co, Ni). The synergistic effect between M(II) chlorides and aluminum lactate plays a critical role in the cooperative crystallization of M2+ and Al3+ into pore-space-partitioned MOFs (partitioned acs topology) with fast crystallization kinetics (about 3 h). New M2+/Al3+ MOFs exhibit highly tunable porosity and extraordinarily high uptakes for CO2 and small hydrocarbon molecules (112 cm3/g for CO2, 176 cm3/g for C2H2, 156 cm3/g for C2H4, and 163 cm3/g for C2H6) at 298 K and 1 bar. The high uptake capacity coupled with high selectivity (up to 8.5 for C2H2/CO2, 10.8 for C2H2/C2H4) gives rise to efficient separations of either C2H2/CO2 or C2H2/C2H4 gas mixtures, as confirmed by experimental breakthrough experiments.

A Capping-assisted Strategy for Synthesis of Glass-like Carboxylate-biased Coordination Polymers

The direct preparation of glass-like carboxylate-based coordination polymers (CPs) possessing continuous internal structure and transparency is challenging due to the lack of control on coordination kinetics and subsequently the range of order. Herein, a capping-assisted strategy was presented to control the molecular assembly during the metal-ligand coordination in the solution and to inhibit the long-range of order hence building glass-like CPs (g-CPs) mimicking the polymerization process. 1,3,5-benzene tricarboxylate (BTC) ligand was used to connect the copper cations (Cu2+) into metal-organic complexes of different Cu: BTC ratios (metal-organic pool) in presence of an excess of triethyl amine as a capping agent. Concentrating the Cu-BTC complexes and further drying under mild conditions induced the decapping process which triggered the random crosslinking between the free carboxylate and Cu2+ to form a boundary-free continuous internal structure. The as-prepared Cu-BTC g-CP exhibited an approximately similar fine structure like its crystalline counterpart (HKUST-1), which facilitated solvent and thermal-induced crystallization. Due to the internal structure continuity, the g-CP possesses ceramic-like hardness and wear resistance and plastic-like resilience. This capping-assisted strategy has been successfully extended to Ni-BTC and Fe-BTC systems under mild conditions and thus presenting a general method for the formation of glass-like carboxylate-based CPs.

Mechanochemical-Triggered Confined Coordination of Iron-Biomass Composites for Efficient Cr(VI) Reduction Under Circumneutral pH Via Accelerated Electron Extraction

Green and eco-friendly iron-based materials for efficient Cr(VI) removal have attracted considerable interest, but challenges related to narrow working pH ranges and iron utilization efficiency still remain. Herein, inspired by the hot-spot effect-triggered confined coordination strategy, a biomass-confined iron-based reductant (CMC-GTB/Febm) is designed for Cr(VI) reduction and detoxification. Electron enrichment and confinement on biomass carriers are achieved through electron transfer mediated by coordination interactions between anchored iron species and biomass. Thus, the CMC-GTB/Febm achieved 99% Cr(VI) reduction at circumneutral pH (5-9), with a maximum removal capacity of 180 mg g-1. Under iron dosing close to the stoichiometric ratio (Fe/Cr = 3/1), the Cr(VI) removal kinetics and efficiency of CMC-GTB/Febm are 53.2-870.5 and 5.5-48.8 times higher than those of micro- or nano-zero-valent iron (ZVI), respectively. Mechanistic analyses revealed that confined electron transfer is facilitated by coordination interactions between biomass and anchored iron species, which enhanced Cr(VI) reduction. Moreover, biomass-tethered reduced Cr(III) is stabilized by electrostatic adsorption and biomass-Cr(III) coordination, which ultimately detoxifies the phytotoxicity of Cr(VI). The conversion of this strategy to kilogram-scale production and the simulated Cr(VI) removal in real water matrices are confirmed. This study provides a basis for the controlled design and industrial application of environmentally friendly iron-based reductants.

Thermally Triggered In Situ Template-Escape Strategy for Controlled Construction of Hollow MOFs

Hollow spherical structures can endow metal-organic framework (MOF) materials with new capabilities. However, devising an uncomplicated synthesis method for hollow MOF spheres remains a formidable challenge. Here, the green hydrothermal method is employed to drive the polymer template, inducing a thermal transition (viscous flow state) that facilitates escape and enables the construction of a series of hollow MOF spheres. The hollow MIL-101(Cr) spherical capsules (Void@MIL-101) with high stability and well-defined morphology are synthesized as the first example. After encapsulating Pd nanoparticles, it exhibits an accelerated mass transfer effect and superior catalytic selectivity in synthesizing secondary aromatic amines. Furthermore, the versatility of this in situ template-escape strategy is demonstrated through the successful construction of hollow CPM-243(Cr) and SiO2 spheres. This innovative approach opens new avenues for the development of various hollow materials with enhanced properties.

Isoreticular Tolerance and Phase Selection in the Synthesis of Multi-Module Metal-Organic Frameworks for Gas Separation and Electrocatalytic OER

Although metal-organic frameworks are coordination-driven assemblies, the structural prediction and design using metal-ligand interactions can be unreliable due to other competing interactions. Leveraging non-coordination interactions to develop porous assemblies could enable new materials and applications. Here, we use a multi-module MOF system to explore important and pervasive impact of ligand-ligand interactions on metal-ligand as well as ligand-ligand co-assembly process. It is found that ligand-ligand interactions play critical roles on the scope or breakdown of isoreticular chemistry. With cooperative di- and tri-topic ligands, a family of Ni-MOFs has been synthesized in various structure types including partitioned MIL-88-acs (pacs), interrupted pacs (i-pacs), and UMCM-1-muo. A new type of isoreticular chemistry on the muo platform is established between two drastically different chemical systems. The gas sorption and electrocatalytic studies were performed that reveal excellent performance such as high C2H2/CO2 selectivity of 21.8 and high C2H2 uptake capacity of 114.5 cm3/g at 298 K and 1 bar.

Topological Transformation and Dimensional Reduction in Multicomponent Metal-Organic Frameworks for Gas Separations

Multicomponent MOFs have offered a wide range of opportunities to harness new properties. However, the synthesis of multicomponent MOFs remains challenging. This work demonstrates the synthesis of a family of multicomponent MOFs by topological transformation from well-established multicomponent partitioned acs (pacs) structures. Such transformation is based on the new understanding on the self-assembly process of pacs MOFs. A key to this understanding is that pacs structures, topologically regarded as the introduction of a pore-partitioning ligand into MOF-235/MIL-88 type framework, are likely to be formed in a layer-pillar-layer fashion in practical reactions. As the π-π interaction between layers and other chemical interactions during the self-assembly process are recognized, the structural transformation can be modulated from 3D pacs structures to 2D interrupted pacs structures (denoted i-pacs). It is especially noteworthy that such dimensional reduction is first observed in metal-organic frameworks and the i-pacs MOFs contain four structural modules and up to five components, which have the highest complexity among 2D MOFs. Interestingly, the i-pacs MOFs have significantly enhanced performance for CO2/N2 separation in comparison with pacs MOFs.

Multi-Stage Optimization of Pore Size and Shape in Pore-Space-Partitioned Metal-Organic Frameworks for Highly Selective and Sensitive Benzene Capture

Compared to exploratory development of new structure types, pushing the limits of isoreticular synthesis on a high-performance MOF platform may have higher probability of achieving targeted properties. Multi-modular MOF platforms could offer even more opportunities by expanding the scope of isoreticular chemistry. However, navigating isoreticular chemistry towards best properties on a multi-modular platform is challenging due to multiple interconnected pathways. Here on the multi-modular pacs (partitioned acs) platform, we demonstrate accessibility to a new regime of pore geometry using two independently adjustable modules (framework-forming module 1 and pore-partitioning module 2). A series of new pacs materials have been made. Benzene/cyclohexane selectivity is tuned, progressively, from 4.5 to 15.6 to 195.4 and to 482.5 by pushing the boundary of the pacs platform towards the smallest modules known so far. The exceptional stability of these materials in retaining both porosity and single crystallinity enables single-crystal diffraction studies of different crystal forms (as-synthesized, activated, guest-loaded) that help reveal the mechanistic aspects of adsorption in pacs materials.

Two-Periodic MoS2-Type Metal-Organic Frameworks with Intrinsic Intralayer Porosity for High-Capacity Water Sorption

2D metal-organic frameworks (2D-MOFs) are an important class of functional porous materials. However, the low porosity and surface area of 2D-MOFs have greatly limited their functionalities and applications. Herein, the rational synthesis of a class of mos-MOFs with molybdenum disulfide (mos) net based on the assembly of trinuclear metal clusters and 3-connected tripodal organic ligands is reported. The non-crystallographic (3,6)-connected mos net, different from the 3-connected hcb net of graphene, offers abundant intralayer voids courtesy of the split of one node into two. Indeed, mos-MOFs exhibit high apparent Brunauer-Emmett-Teller surface areas, significantly superior to those of other 2D-MOF analogs. Markedly, hydrolytically stable Cr-mos-MOF-1 displays an impressive water vapor uptake of 0.75 g g-1 at 298 K and P/P0 = 0.9, among the highest in 2D-MOFs. The combined water adsorption and X-ray diffraction study reveal the water adsorption mechanisms, suggesting the importance of intralayer porosities of mos-MOFs for high-performance water capture. This study paves the way for a reliable approach to synthesizing 2D-MOFs with high porosity and surface areas for diverse applications.

Ligand Circuit Concept for Developing Gas Separation Materials from Pore-Space-Partitioned Metal-Organic Frameworks

Isoreticular chemistry is among the most powerful strategies for designing novel materials with optimizable pore geometry and properties. Of great significance to the further advance of isoreticular chemistry is the development of broadly applicable new concepts capable of guiding and systematizing the ligand-family expansion as well as establishing correlations between dissimilar and seemingly uncorrelated ligands for better predictive synthetic design and more insightful structure and property analysis. Here ligand circuit concept is proposed and its use has been demonstrated for the synthesis of a family of highly stable, high-performance pore-space-partitioned materials based on an acyclic ligand, trans, trans-muconic acid. This work represents a key step toward developing highly porous and highly stable pore-space-partitioned materials from acyclic ligands. The new materials exhibit excellent sorption properties such as high uptake capacity for CO2 (81.3 cm3 g-1) and C2H2 (165.4 cm3 g-1) by CPM-7.3a-NiV. CPM-7.3a-CoV shows C2H6-selective C2H6/C2H4 separation properties and its high uptakes for C2H4 (134.0 cm3 g-1) and C2H6 (148.0 cm3 g-1) at 1 bar and 298 K contribute to the separation potential of 1.35 mmol g-1. The multi-cycle breakthrough experiment confirms the promising separation performance for C2H2/CO2.

Understanding water reaction pathways to control the hydrolytic reactivity of a Zn metal-organic framework

Metal-organic frameworks (MOFs) are a class of porous materials that are of topical interest for their utility in water-related applications. Nevertheless, molecular-level insight into water-MOF interactions and MOF hydrolytic reactivity remains understudied. Herein, we report two hydrolytic pathways leading to either structural stability or framework decomposition of a MOF (ZnMOF-1). The two distinct ZnMOF-1 water reaction pathways are linked to the diffusion rate of incorporated guest dimethylformamide (DMF) molecules: slow diffusion of DMF triggers evolution of the initial MOF into a water-stable MOF product exhibiting enhanced water adsorption, while fast exchange of DMF with water leads to decomposition. The starting MOF, three intermediates from the water reaction pathways and the final stable MOF have been characterized. The documentation of two distinct pathways counters the stereotype that water exposure always leads to destruction or degradation of water-sensitive MOFs, and demonstrates that water-stable MOFs with improved adsorption properties can be prepared via controlled solvent-triggered structural rearrangement.

Porous MOFs with geometric mismatch between trimers and octatopic pyrene-based ligands for low-temperature methane storage

Natural gas is recognized as a transitional clean energy fuel to address a variety of environmental problems. Identifying porous adsorbents with high-capacity low-temperature methane adsorption performances is crucial for advancing next-generation technologies for efficiently utilizing boil-off gas, inevitablely generated from liquefied natural gas systems. Herein, we synthesized highly porous metal-organic frameworks (MOFs)-TBPP-MOFs with a geometric mismatch strategy by combining seemingly incompatible trinuclear clusters with octatopic pyrene-based ligands. The Cr-TBPP-MOF achieves a high apparent Brunauer-Emmett-Teller (BET) surface area of 3700 m2 g-1 and demonstrates pore volumes of 1.31 cm3 g-1 at P/P0 = 0.9. Consequently, under the LNG-ANG coupling operation conditions, Cr-TBPP-MOF exhibits a high low-temperature methane uptake of 335 cm3 (STP) cm-3 at 159 K and 10 bar with a working capacity of 302 cm3 (STP) cm-3 between 6 bar and 159 K to 5 bar and 298 K, positioning it as a promising candidate material for low-temperature methane adsorption.

Selective Separation of C8 Aromatics by an Interpenetrating Metal-Organic Framework Material

O-xylene (OX) is an important chemical raw material, but it is often produced in mixtures with other C8 aromatics. Similar physicochemical properties of the C8 isomers make their separation and purification very difficult and energy intensive. There is an unmet need for an adsorbent that would be effective for the separation of OX from the other C8 isomers. This work reports a three-dimensional interpenetrated metal-organic framework, SYUCT-110, that interacts with each of the single-component C8 isomers to form. The selectivity of C8 aromatic hydrocarbons was determined through liquid-phase batch uptake experiments. The results revealed that the selectivity order was OX > PX > MX > ethylbenzene (EB). The selectivity values were found to be 2.63, 1.58, 5.51, 3.71, 1.86, and 3.02 for OX/MX, OX/PX, OX/EB, PX/MX, MX/EB, and PX/EB, respectively. The adsorption capacity of OX was 71 mg/g. Grand Canonical Monte Carlo simulations were used to study the C8 adsorption sites, revealing that π···π interactions are the main reason for the observed adsorption selectivity. The adsorption energy calculation results also verified the selectivity of SYUCT-110 for the synthesis of OX.

Ultrastable Carboxyl-Functionalized Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation

Isoreticular chemistry, which enables property optimization by changing compositions without changing topology, is a powerful synthetic strategy. One of the biggest challenges facing isoreticular chemistry is to extend it to ligands with strongly coordinating substituent groups such as unbound -COOH, because competitive interactions between such groups and metal ions can derail isoreticular chemistry. It is even more challenging to have an isoreticular series of carboxyl-functionalized MOFs capable of encompassing chemically disparate metal ions. Here, with the simultaneous introduction of carboxyl functionalization and pore space partition, a family of carboxyl-functionalized materials is developed in diverse compositions from homometallic Cr3+ and Ni2+ to heterometallic Co2+/V3+, Ni2+/V3+, Co2+/In3+, Co2+/Ni2+. Cr-MOFs remain highly crystalline in boiling water. Unprecedentedly, one Cr-MOF can withstand the treatment cycle with 10m NaOH and 12m HCl, allowing reversible inter-conversion between unbound -COOH acid form and -COO- base form. These materials exhibit excellent sorption properties such as high uptake capacity for CO2 (100.2 cm3 g-1) and hydrocarbon gases (e.g., 142.1 cm3 g-1 for C2H2, 110.5 cm3 g-1 for C2H4) at 1 bar and 298K, high benzene/cyclohexane selectivity (up to ≈40), and promising separation performance for gas mixtures such as C2H2/CO2 and C2H2/C2H4.

Metal-organic frameworks for organic transformations by photocatalysis and photothermal catalysis

Organic transformation by light-driven catalysis, especially, photocatalysis and photothermal catalysis, denoted as photo(thermal) catalysis, is an efficient, green, and economical route to produce value-added compounds. In recent years, owing to their diverse structure types, tunable pore sizes, and abundant active sites, metal-organic framework (MOF)-based photo(thermal) catalysis has attracted broad interest in organic transformations. In this review, we provide a comprehensive and systematic overview of MOF-based photo(thermal) catalysis for organic transformations. First, the general mechanisms, unique advantages, and strategies to improve the performance of MOFs in photo(thermal) catalysis are discussed. Then, outstanding examples of organic transformations over MOF-based photo(thermal) catalysis are introduced according to the reaction type. In addition, several representative advanced characterization techniques used for revealing the charge reaction kinetics and reaction intermediates of MOF-based organic transformations by photo(thermal) catalysis are presented. Finally, the prospects and challenges in this field are proposed. This review aims to inspire the rational design and development of MOF-based materials with improved performance in organic transformations by photocatalysis and photothermal catalysis.

Advancing Pore-Space-Partitioned Metal-Organic Frameworks with Isoreticular Cluster Concept

Trigonal planar M3(O/OH) trimers are among the most important clusters in inorganic chemistry and are the foundational features of multiple high-impact MOF platforms. Here we introduce a concept called isoreticular cluster series and demonstrate that M3(O/OH), as the first member of a supertrimer series, can be combined with a higher hierarchical member (double-deck trimer here) to advance isoreticular chemistry. We report here an isoreticular series of pore-space-partitioned MOFs called M3M6 pacs made from co-assembly between M3 single-deck trimer and M3x2 double-deck trimer. Important factors were identified on this multi-modular MOF platform to guide optimization of each module, which enables the phase selection of M3M6 pacs by overcoming the formation of previously-always-observed same-cluster phases. The new pacs materials exhibit high surface area and high uptake capacity for CO2 and small hydrocarbons, as well as selective adsorption properties relevant to separation of industrially important mixtures such as C2H2/CO2 and C2H2/C2H4. Furthermore, new M3M6 pacs materials show electrocatalytic properties with high activity.

Prediction of adsorption performance of ZIF-67 for malachite green based on artificial neural network using L-BFGS algorithm

Given the necessity and urgency in removing organic pollutants such as malachite green (MG) from the environment, it is vital to screen high-capacity adsorbents using artificial neural network (ANN) methods quickly and accurately. In this study, a series of ZIF-67 were synthesized, which adsorption properties for organic pollutants, especially MG, were systematically evaluated and determined as 241.720 mg g-1 (25 ℃, 2 h). The adsorption process was more consistent with pseudo-second-order kinetics and Langmuir adsorption isotherm, which correlation coefficients were 0.995 and 0.997, respectively. The chemisorption mechanism was considered to be π-π stacking interaction between imidazole and aromatic ring. Then, a Python-based neural network model using the Limited-memory BFGS algorithm was constructed by collecting the crucial structural parameters of ZIF-67 and the experimental data of batch adsorption. The model, optimized extensively, outperformed similar Matlab-based ANN with a coefficient of determination of 0.9882 and mean square error of 0.0009 in predicting ZIF-67 adsorption of MG. Furthermore, the model demonstrated a good generalization ability in the predictive training of other organic pollutants. In brief, ANN was successfully separated from the Matlab platform, providing a robust framework for high-precision prediction of organic pollutants and guiding the synthesis of adsorbents.

Mining for Metal-Organic Systems: Chemistry Frontiers of Th-, U-, and Zr-Materials

The conceptual framework presented in this Perspective overviews the design principles of innovative thorium-based materials that could address urgent needs of the medicinal, nuclear energy, and waste remediation sectors from the lens of zirconium and uranium analogs. We survey the intersections of Zr, Th, and U chemistry with a focus on how the intrinsic behavior of each metal translates to broader material properties, including, but not limited to, structural and topological diversity, preferential metal-ligand binding, and reactivity. On the example of several classes of materials, including organometallic complexes, polyoxometalates, and the primary focus of this Perspective, metal-organic frameworks (MOFs), the design principles that govern the preparation of Zr-, Th-, and U-compounds, including oxophilicity, variation in oxidation states, and stable coordination environments have been considered. Further, we highlight how the impact of the mentioned variables may shift throughout the progression from discrete molecular systems to extended structures. We discuss the common assumption that zirconium-organic materials are typically considered a close analog of thorium-based congeners in areas such as material design and preparation. Through consideration of fundamental chemistry principles, we shed light on the relationships between Zr-, Th-, and U-based materials and highlight how a critical analysis of their distinct properties can be used to target a desired material performance. As a result, we provide a detailed understanding of Th-based materials chemistry by anchoring their fundamental properties between two well-studied reference points, zirconium- and uranium-containing analogs.

Tailorable Multi-Modular Pore-Space-Partitioned Vanadium Metal-Organic Frameworks for Gas Separation

Currently, few porous vanadium metal-organic frameworks (V-MOFs) are known and even fewer are obtainable as single crystals, resulting in limited information on their structures and properties. Here this work demonstrates remarkable promise of V-MOFs by presenting an extensible family of V-MOFs with tailorable pore geometry and properties. The synthesis leverages inter-modular synergy on a tri-modular pore-partitioned platform. New V-MOFs show a broad range of structural features and sorption properties suitable for gas storage and separation applications for C2H2/CO2, C2H6/C2H4, and C3H8/C3H6. The c/a ratio of the hexagonal cell, a measure of pore shape, is tunable from 0.612 to 1.258. Other tunable properties include pore size from 5.0 to 10.9 Å and surface area from 820 to 2964 m2 g-1. With C2H2/CO2 selectivity from 3.3 to 11 and high uptake capacity for C2H2 from 65.2 to 182 cm3 g-1 (298K, 1 bar), an efficient separation is confirmed by breakthrough experiments. The near-record high uptake for C2H6 (166.8 cm3 g-1) contributes to the promise for C2H6-selective separation of C2H6/C2H4. The multi-module pore expansion enables transition from C3H6-selective to more desirable C3H8-selective separation with extraordinarily high C3H8 uptake (254.9 cm3 g-1) and high separation potential (1.25 mmol g-1) for C3H8/C3H6 (50:50 v/v) mixture.

Friends or Foes: Fundamental Principles of Th-Organic Scaffold Chemistry Using Zr-Analogs as a Guide

The fundamental interest in actinide chemistry, particularly for the development of thorium-based materials, is experiencing a renaissance owing to the recent and rapidly growing attention to fuel cycle reactors, radiological daughters for nuclear medicine, and efficient nuclear stockpile development. Herein, we uncover fundamental principles of thorium chemistry on the example of Th-based extended structures such as metal-organic frameworks in comparison with the discrete systems and zirconium extended analogs, demonstrating remarkable over two-and-half-year chemical stability of Th-based frameworks as a function of metal node connectivity, amount of defects, and conformational linker rigidity through comprehensive spectroscopic and crystallographic analysis as well as theoretical modeling. Despite exceptional chemical stability, we report the first example of studies focusing on the reactivity of the most chemically stable Th-based frameworks in comparison with the discrete Th-based systems such as metal-organic complexes and a cage, contrasting multicycle recyclability and selectivity (>97%) of the extended structures in comparison with the molecular compounds. Overall, the presented work not only establishes the conceptual foundation for evaluating the capabilities of Th-based materials but also represents a milestone for their multifaceted future and foreshadows their potential to shape the next era of actinide chemistry.

Programmable Water Sorption through Linker Installation into a Zirconium Metal-Organic Framework

Hydrolytically stable materials exhibiting a wide range of programmable water sorption behaviors are crucial for on-demand water sorption systems. While notable advancements in employing metal-organic frameworks (MOFs) as promising water adsorbents have been made, developing a robust yet easily tailorable MOF scaffold for specific operational conditions remains a challenge. To address this demand, we employed a topology-guided linker installation strategy using NU-600, which is a zirconium-based MOF (Zr-MOF) that contains three vacant crystallographically defined coordination sites. Through a judicious selection of three N-heterocyclic auxiliary linkers of specific lengths, we installed them into designated sites, giving rise to six new MOFs bearing different combinations of linkers in predetermined positions. The resulting MOFs, denoted as NU-606 to NU-611, demonstrate enhanced structural stability against capillary force-driven channel collapse during water desorption due to the increased connectivity of the Zr6 clusters in the resulting MOFs. Furthermore, incorporating these auxiliary linkers with various hydrophilic N sites enables the systematic modulation of the pore-filling pressure from about 55% relative humidity (RH) for the parent NU-600 down to below 40% RH. This topology-driven linker installation strategy offers precise control of water sorption properties for MOFs, highlighting a facile route to design MOF adsorbents for use in water sorption applications.

Melt-quenched glass formation of a family of metal-carboxylate frameworks

Metal-organic framework (MOF) glasses are an emerging class of glasses which complement traditional inorganic, organic and metallic counterparts due to their hybrid nature. Although a few zeolitic imidazolate frameworks have been made into glasses, how to melt and quench the largest subclass of MOFs, metal carboxylate frameworks, into glasses remains challenging. Here, we develop a strategy by grafting the zwitterions on the carboxylate ligands and incorporating organic acids in the framework channels to enable the glass formation. The charge delocalization of zwitterion-acid subsystem and the densely filled channels facilitate the coordination bonding mismatch and thus reduce the melting temperature. Following melt-quenching realizes the glass formation of a family of carboxylate MOFs (UiO-67, UiO-68 and DUT-5), which are usually believed to be un-meltable. Our work opens up an avenue for melt-quenching porous molecular solids into glasses.

Zinc(II)-MOF: A Versatile Luminescent Sensor for Selective Molecular Recognition of Flame Retardants and Antibiotics

An exceptional Zinc(II)-organic framework with the formula [{Zn(L4-py)(bdc)}·DMF]n (Zn-MOF) has been constructed solvothermally using a novel linker L4-py {2,7-bis(3-(pyridin-4-ylethynyl)phenyl)benzo[lmn][3,8]phenanthroline-1,3,6,8(2H,7H)-tetraone}, coligand H2bdc (1,4-benzenedicarboxylic acid), and ZnBF4·xH2O. The ligand L4-py has been fabricated after functionalization of NDA (1,4,5,8-naphthalenetetracarboxylic dianhydride) core with 3-(pyridin-4-ylethynyl)phenyl group. The single-crystal X-ray analysis reveals that Zn-MOF exhibits a comprehensive three-dimensional (3D) framework architecture and features (4)-connected uninodal dia; 4/6/c1; sqc6 topology with point symbol {66} and two-dimensional (2D) + 2D, parallel polycatenation. Notably, Zn-MOF displayed excellent fluorescence phenomenon and stability in water as well as in methanol solvents and was harnessed as a versatile sensor, demonstrating selective and sensitive molecular recognition of flame retardants and antibiotics. Notably, Zn-MOF displayed 57 and 49.5% quenching efficiency for the flame-retardant pentabromophenol (PBP) and 3,3',5,5'-tetrabromobisphenol A (TBPA), respectively. Whereas an outstanding 90% quenching efficiency was observed for antibiotics, tetracycline (TC) and secnidazole (SD). The mechanistic investigations of this luminescence quenching suggest that this might be primarily occurring via the Fourier resonance energy transfer (FRET) and photoinduced electron transfer (PET) mechanisms, which might be assisted by the competitive absorption and host-guest interactions. The π-electron-rich framework structure of sensor Zn-MOF activates this mechanism.

Leveraging metal node-linker self-assembly to access functional anisotropy of zirconium-based MOF-on-MOF epitaxial heterostructure thin films

Chemically robust, functional porous materials are imperative for designing novel membranes for chemical separation and heterogeneous catalysts. Among the array of potential materials, zirconium (Zr)-based metal-organic frameworks (MOFs) have garnered considerable attention, and have been investigated for applications related to gas separation and storage, and catalysis. However, a significant challenge with Zr-MOFs lies in their processibility, particularly in achieving homogenous thin films and controlling functional anisotropy. The recent developments in MOF thin film fabrication methodologies do not yield a solution to achieve mild reaction condition growth of Zr-MOF thin films with epitaxial MOF-on-MOF geometry (i.e. functional anisotropy). In the current work, we have devised a straightforward methodology under room temperature conditions, which enables epitaxial, oriented MOF-on-MOF thin film growth. This achievement is accomplished through a stepwise self-assembly approach involving Zr nodes and linkers on a functionalized substrate. This de novo developed strategy of functionality design is demonstrated for UiO-66 (University of Oslo) type Zr-MOFs. We have demonstrated the precise placement of chemical functionalities within the thin film structure, allowing for controlled chemical diffusion and regulation of diffusion selectivity.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Multilevel-Regulated Metal-Organic Framework Platform Integrating Pore Space Partition and Open-Metal Sites for Enhanced CO2 Photoreduction to CO with Nearly 100% Selectivity

Rational design and regulation of atomically precise photocatalysts are essential for constructing efficient photocatalytic systems tunable at both the atomic and molecular levels. Herein, we propose a platform-based strategy capable of integrating both pore space partition (PSP) and open-metal sites (OMSs) as foundational features for constructing high-performance photocatalysts. We demonstrate the first structural prototype obtained from this strategy: pore-partitioned NiTCPE-pstp (TCPE = 1,1,2,2-tetra(4-carboxylphenyl)ethylene, pstp = partitioned stp topology). Nonpartitioned NiTCPE-stp is constructed from six-connected [Ni3(μ3-OH)(COO)6] trimer and TCPE linker to form 1D hexagonal channels with six coplanar OMSs directed at channel centers. After introducing triangular pore-partitioning ligands, half of the OMSs were retained, while the other half were used for PSP, leading to unprecedented microenvironment regulation of the pore structure. The resulting material integrates multiple advanced properties, including robustness, wider absorption range, enhanced electronic conductivity, and high CO2 adsorption, all of which are highly desirable for photocatalytic applications. Remarkably, NiTCPE-pstp exhibits excellent CO2 photoreduction activity with a high CO generation rate of 3353.6 μmol g-1 h-1 and nearly 100% selectivity. Theoretical and experimental studies show that the introduction of partitioning ligands not only optimizes the electronic structure to promote the separation and transfer of photogenerated carriers but also reduces the energy barrier for the formation of *COOH intermediates while promoting CO2 activation and CO desorption. This work is believed to be the first example to integrate PSP strategies and OMSs within metal-organic framework (MOF) photocatalysts, which provides new insight as well as new structural prototype for the design and performance optimization of MOF-based photocatalysts.

Multi-Modular Design of Stable Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation Applications

Pore space partition (PSP) is an effective materials design method for developing high-performance small-pore materials for storage and separation of gas molecules. The continued success of PSP depends on broad availability and judicious choice of pore-partition ligands and better understanding of each structural module on stability and sorption properties. Here, by using substructural bioisosteric strategy (sub-BIS), a dramatic expansion of pore-partitioned materials is targeted by using ditopic dipyridyl ligands with non-aromatic cores or extenders, as well as by expanding heterometallic clusters to uncommon nickel-vanadium and nickel-indium clusters rarely known before in porous materials. The dual-module iterative refinement of pore-partition ligands and trimers leads to remarkable enhancement of chemical stability and porosity. Here a family of 23 pore-partitioned materials synthesized from five pore-partition ligands and seven types of trimeric clusters is reported. New materials with such compositionally and structurally diverse framework modules reveal key factors that dictate stability, porosity, and gas separation properties. Among these, materials based on heterometallic vanadium-nickel trimeric clusters give rise to the highest long-term hydrolytic stability and remarkable uptake capacity for CO2 , C2 H2 /C2 H4 /C2 H6 , and C3 H6 /C3 H8 hydrocarbon gases. The breakthrough experiment shows the potential application of new materials for separating gas mixtures such as C2 H2 /CO2 .

Two-Dimensional MFI-Type Zeolite Flow Battery Membranes

Vanadium flow battery (VFB) is one of the most reliable stationary electrochemical energy-storage technologies, and a membrane with high vanadium resistance and proton conductivity is essential for manufacturing high-performance VFBs. In this study, a two-dimensional (2D) MFI-type zeolite membrane was fabricated from zeolite nanosheet modules, which displayed excellent vanadium resistance (0.07 mmol L-1 h-1 ) and proton conductivity (0.16 S cm-1 ), yielding a coulombic efficiency of 93.9 %, a voltage efficiency of 87.6 %, and an energy efficiency of 82.3 % at 40 mA cm-2 . The self-discharge period of a VFB equipped with 2D MFI-type zeolite membrane increased up to 116.2 h, which was significantly longer than that of the commercial perfluorinated sulfonate membrane (45.9 h). Furthermore, the corresponding battery performance remained stable over 1000 cycles (>1500 h) at 80 mA cm-2 . These findings demonstrate that 2D MFI-type membranes are promising ion-conductive membranes applicable for stationary electrochemical energy-storage devices.

Creating Order in Ultrastable Phosphonate Metal-Organic Frameworks via Isolable Hydrogen-Bonded Intermediates

The stability presented by trivalent metal-organic frameworks (MOFs) makes them an attractive class of materials. With phosphonate-based ligands, crystallization is a challenge, as there are significantly more binding motifs that can be adopted due to the extra oxygen tether compared to carboxylate counterparts and the self-assembly processes are less reversible. Despite this, we have reported charge-assisted hydrogen-bonded metal-organic frameworks (HMOFs) consisting of [Cr(H2O)6]3+ and phosphonate ligands, which were crystallographically characterized. We sought to use these HMOFs as a crystalline intermediate to synthesize ordered Cr(III)-phosphonate MOFs. This can be done by dehydrating the HMOF to remove the aquo ligands around the Cr(III) center, forcing metal-phosphonate coordination. Herein, a new porous HMOF, H-CALF-50, is synthesized and then dehydrated to yield the MOF CALF-50. CALF-50 is ordered, although it is not single crystalline. It does, however, have exceptional stability, maintaining crystallinity and surface area after boiling in water for 3 weeks and soaking in 14.5 M H3PO4 for 24 h and 9 M HCl for 72 h. Computational methods are used to study the HMOF to MOF transformation and give insight into the nature of the structure and the degree of heterogeneity.

Cooperative and Orthogonal Switching in the Solid State Enabled by Metal-Organic Framework Confinement Leading to a Thermo-Photochromic Platform

Cooperative behavior and orthogonal responses of two classes of coordinatively integrated photochromic molecules towards distinct external stimuli were demonstrated on the first example of a photo-thermo-responsive hierarchical platform. Synergetic and orthogonal responses to temperature and excitation wavelength are achieved by confining the stimuli-responsive moieties within a metal-organic framework (MOF), leading to the preparation of a novel photo-thermo-responsive spiropyran-diarylethene based material. Synergistic behavior of two photoswitches enables the study of stimuli-responsive resonance energy transfer as well as control of the photoinduced charge transfer processes, milestones required to advance optoelectronics development. Spectroscopic studies in combination with theoretical modeling revealed a nonlinear effect on the material electronic structure arising from the coordinative integration of photoresponsive molecules with distinct photoisomerization mechanisms. Thus, the reported work covers multivariable facets of not only fundamental aspects of photoswitch cooperativity, but also provides a pathway to modulate photophysics and electronics of multidimensional functional materials exhibiting thermo-photochromism.

Anisotropic flexibility and rigidification in a TPE-based Zr-MOFs with scu topology

Tetraphenylethylene (TPE)-based ligands are appealing for constructing metal-organic frameworks (MOFs) with new functions and responsiveness. Here, we report a non-interpenetrated TPE-based scu Zr-MOF with anisotropic flexibility, that is, Zr-TCPE (H4TCPE = 1,1,2,2-tetra(4-carboxylphenyl)ethylene), remaining two anisotropic pockets. The framework flexibility is further anisotropically rigidified by installing linkers individually at specific pockets. By individually installing dicarboxylic acid L1 or L2 at pocket A or B, the framework flexibility along the b-axis or c-axis is rigidified, and the intermolecular or intramolecular motions of organic ligands are restricted, respectively. Synergistically, with dual linker installation, the flexibility is completely rigidified with the restriction of ligand motion, resulting in MOFs with enhanced stability and improved separation ability. Furthermore, in situ observation of the flipping of the phenyl ring and its rigidification process is made by 2H solid-state NMR. The anisotropic rigidification of flexibility in scu Zr-MOFs guides the directional control of ligand motion for designing stimuli-responsive emitting or efficient separation materials.

Cyclobutanedicarboxylate Metal-Organic Frameworks as a Platform for Dramatic Amplification of Pore Partition Effect

Ultrafine tuning of MOF structures at subangstrom or picometer levels can help improve separation selectivity for gases with subtle differences. However, for MOFs with a large enough pore size, the effect from ultrafine tuning on sorption can be muted. Here we show an integrative strategy that couples extreme pore compression with ultrafine pore tuning. This strategy is made possible by unique combination of two features of the partitioned acs (pacs) platform: multimodular framework and exceptional tolerance toward isoreticular replacement. Specifically, we use one module (ligand 1, L1) to shrink the pore size to an extreme minimum on pacs. A compression ratio of about 30% was achieved (based on the unit cell c/a ratio) from prototypical 1,4-benzenedicarboxylate-pacs to trans-1,3-cyclobutanedicarboxylate-pacs. This is followed by using another module (ligand 2, L2) for ultrafine pore tuning (<3% compression). This L1-L2 strategy increases the C2H2/CO2 selectivity from 2.6 to 20.8 and gives rise to an excellent experimental breakthrough performance. As the shortest cyclic dicarboxylate that mimics p-benzene-based moieties using a bioisosteric (BIS) strategy on pacs, trans-1,3-cyclobutanedicarboxylate offers new opportunities in MOF chemistry.

A novel S,N-rich MOF for efficient recovery of Au(III): Performance and mechanism

A novel S,N-rich MOF with adenine and 4,4'-thiodiphenol as organic ligands was synthesized via the one-step solvothermal method, and used for gold recovery. The pH impact, adsorption kinetics, isotherms, thermodynamics, selectivity, and reusability were investigated accordingly. The adsorption and desorption mechanism were also explored comprehensively. The electronic attraction, coordination, and in situ redox account for the Au(III) adsorption. The Au(III) adsorption is affected strongly by the pH of solutions, and best at pH of 2.57. The MOF exhibits exceptional adsorption capacity as high as 3680 mg/g at 55 °C, fast kinetics with 8 min for 9.6 mg/L Au(III), and excellent selectivity for gold ion in real e-waste leachates. The adsorption process of gold on the adsorbent is endothermic and spontaneous, and influenced visibly by temperature. The adsorption ratio still maintained 99% after seven adsorption-desorption cycles. The column adsorption experiments show that the MOF has outstanding selectivity for Au(III) with 100% of removal efficiency in a complex solution containing Au, Ni, Cu, Cd, Co, and Zn ions. A glorious adsorption with a breakthrough time of 532 mins was obtained for the breakthrough curve. This study not only provides an efficient adsorbent for gold recovery, but also guidance for designing new materials.

Simultaneous Control of Flexibility and Rigidity in Pore-Space-Partitioned Metal-Organic Frameworks

Flexi-MOFs are typically limited to low-connected (<9) frameworks. Here we report a platform-wide approach capable of creating a family of high-connected materials (collectively called CPM-220) that integrate exceptional framework flexibility with high rigidity. We show that the multi-module nature of the pore-space-partitioned pacs (partitioned acs net) platform allows us to introduce flexibility as well as to simultaneously impose high rigidity in a tunable module-specific fashion. The inter-modular synergy has remarkable macro-morphological and sub-nanometer structural impacts. A prominent manifestation at both length scales is the retention of X-ray-quality single crystallinity despite huge hexagonal c-axial contraction (≈ 30%) and harsh sample treatment such as degassing and sorption cycles. CPM-220 sets multiple precedents and benchmarks on the pacs platform in both structural and sorption properties. They possess exceptionally high benzene/cyclohexane selectivity, unusual C₃H₆ and C₃H₈ isotherms, and promising separation performance for small gas molecules such as C₂H₂/CO₂.

Solvent-free Synthesis of Multi-Module Pore-Space-Partitioned Metal-Organic Frameworks for Gas Separation

Multi-module design of framework materials with multiple distinct building blocks has attracted much attention because such materials are more amenable to compositional and geometrical tuning and thus offer more opportunities for property optimization. Few examples are known that use environmentally friendly and cost-effective solvent-free method to synthesize such materials. Here, we report the use of solvent-free method (also modulator-free) to synthesize a series of multi-module MOFs with high stability and separation property for C₂ H₂ /CO₂ . The synthesis only requires simple mixing of reactants and short reaction time (2 h). Highly porous and stable materials can be made without any post-synthetic activation. The success of solvent-free synthesis of multi-module MOFs reflects the synergy between different modules, resulting in stable pore-partitioned materials, despite the fact that other competitive crystallization pathways with simpler framework compositions also exist.

Highly Stable Fe/Co-TPY-MIL-88(NH2) Metal-Organic Framework (MOF) in Enzymatic Cascade Reactions for Chemiluminescence-Based Detection of Extracellular Vesicles

Metal-Organic Frameworks (MOFs) can deliver many advantages when acting as enzyme mimics to assist with signal amplification in molecular detection: they have abundant active catalytic sites per unit volume of the material; their structures and elemental compositions are highly tunable, and their high specific surface area and porous property can assist with target separation and enrichment. In the present work, we have demonstrated that, by adding the pore partition agent, 2,4,6-tris(4-pyridyl)pyridine (TPY) during synthesis of the bimetallic Fe/Co-MIL-88(NH₂) MOF to block the open metal sites, a highly porous MOF of Fe/Co-TPY-MIL-88(NH₂) can be produced. This material also exhibits high stability in basic solutions and biofluids and possesses high peroxidase-mimicking activity, which can be utilized to produce long-lasting chemiluminescence (CL) from luminol and H₂O₂. Moreover, acting as the peroxidase-mimic, the Fe/Co-TPY-MIL-88(NH₂) MOF can form the enzymatic cascade with glucose oxidase (GOx) for biomarker detection. When applied to detect extracellular vesicles (EVs), the MOF material and GOx are brought to the proximity on the EVs through two surface proteins, which triggers the enzyme cascade to produce high CL from glucose and luminol. EVs within the concentration range of 5 × 10⁵ to 4 × 10⁷ particles/mL can be detected with an LOD of 1 × 10⁵ particles/mL, and the method can be used to analyze EV contents in human serum without sample preparation and EV purification. Overall, our work demonstrates that the high versatility and tunability of the MOF structures could bring in significant benefits to biosensing and enable ultrasensitive detection of biomarkers with judicious material designs.

Scalable Green Synthesis of Robust Ultra-Microporous Hofmann Clathrate Material with Record C3 H6 Storage Density for Efficient C3 H6 /C3 H8 Separation

Developing porous materials for C₃ H₆ /C₃ H₈ separation faces the challenge of merging excellent separation performance with high stability and easy scalability of synthesis. Herein, we report a robust Hofmann clathrate material (ZJU-75a), featuring high-density strong binding sites to achieve all the above requirements. ZJU-75a adsorbs large amount of C₃ H₆ with a record high storage density of 0.818 g mL^-1 , and concurrently shows high C₃ H₆ /C₃ H₈ selectivity (54.2) at 296 K and 1 bar. Single-crystal structure analysis unveil that the high-density binding sites in ZJU-75a not only provide much stronger interactions with C₃ H₆ but also enable the dense packing of C₃ H₆ . Breakthrough experiments on gas mixtures afford both high separation factor of 14.7 and large C₃ H₆ uptake (2.79 mmol g^-1 ). This material is highly stable and can be easily produced at kilogram-scale using a green synthesis method, making it as a benchmark material to address major challenges for industrial C₃ H₆ /C₃ H₈ separation.

Electrodeposition of Ag/ZIF-8-Modified Membrane for Water Remediation

Metal-organic framework (MOF)-based membranes have been widely used in gas and liquid separation due to their porous structures and tunable compositions. Depending on the guest components, heterostructured MOFs can exhibit multiple functions. In the present work, we report a facile and rapid preparation of zeolitic imidazolate framework-8 (ZIF-8) and silver nanoparticle incorporated ZIF-8 (Ag/ZIF-8)-based membranes on stainless-steel mesh (SSM) through a "green" electrodeposition method. The SSM was first coated with a Zn-plated layer which contains mainly zinc hydroxide nitrate (Zn₅(OH)₈(NO₃)₂·2H₂O) with a "leaf-like" morphology, providing anchoring points for the deposition of ZIF-8 and Ag/ZIF-8. It takes only 10 min to prepare a uniform coating of Zn₅(OH)₈(NO₃)₂·2H₂O in aqueous conditions without the use of a strong base; this is by far the most efficient way of making zinc hydroxide nitrate nanocrystals. Following a similar electrodeposition approach, ZIF-8 and Ag/ZIF-8-coated SSM can be prepared within 20 min by applying a small current. The encapsulation of Ag does not alter the chemical composition nor the crystal structure of ZIF-8. The resulting ZIF-8 and Ag/ZIF-8-coated SSM have been tested for their effectiveness for rhodamine B dye removal in a fast vacuum filtration setting. Additionally, growth of E. coli was significantly inhibited after overnight incubation with Ag/ZIF-8-coated SSM. Overall, we demonstrate a fast synthesis procedure to make ZIF-8 and Ag/ZIF-8-coated SSM membranes for organic dye removal with excellent antimicrobial activity.

Developing Water-Stable Pore-Partitioned Metal-Organic Frameworks with Multi-Level Symmetry for High-Performance Sorption Applications

A new perspective is proposed in the design of pore-space-partitioned MOFs that is focused on ligand symmetry properties sub-divided here into three hierarchical levels: 1) overall ligand, 2) ligand substructure such as backbone or core, and 3) the substituent groups. Different combinations of the above symmetry properties exist. Given the close correlation between nature of chemical moiety and its symmetry, such a unique perspective into ligand symmetry and sub-symmetry in MOF design translates into the influences on MOF properties. Five new MOFs have been prepared that exhibit excellent hydrothermal stability and high-performance adsorption properties with potential applications such as C₃ H₆ /C₂ H₄ and C₂ H₂ /CO₂ selective adsorption. The combination of high stability with high benzene/cyclohexane selectivity of ≈13.7 is also of particular interest.

f-block MOFs: A Pathway to Heterometallic Transuranics

A novel series of heterometallic f-block-frameworks including the first examples of transuranic heterometallic ²³⁸ U/²³⁹ Pu-metal-organic frameworks (MOFs) and a novel monometallic ²³⁹ Pu-analog are reported. In combination with theoretical calculations, we probed the kinetics and thermodynamics of heterometallic actinide(An)-MOF formation and reported the first value of a U-to-Th transmetallation rate. We concluded that formation of uranyl species could be a driving force for solid-state metathesis. Density of states near the Fermi edge, enthalpy of formation, band gap, proton affinity, and thermal/chemical stability were probed as a function of metal ratios. Furthermore, we achieved 97 % of the theoretical maximum capacity for An-integration. These studies shed light on fundamental aspects of actinide chemistry and also foreshadow avenues for the development of emerging classes of An-containing materials, including radioisotope thermoelectric generators or metalloradiopharmaceuticals.

Metal-organic frameworks as chemical nanoreactors for the preparation of catalytically active metal compounds

Since the emergence of metal-organic frameworks (MOFs), a myriad of thrilling properties and applications, in a wide range of fields, have been reported for these materials, which mainly arise from their porous nature and rich host-guest chemistry. However, other important features of MOFs that offer great potential rewards have been only barely explored. For instance, despite the fact that MOFs are suitable candidates to be used as chemical nanoreactors for the preparation, stabilization and characterization of unique functional species, that would be hardly accessible outside the functional constrained space offered by MOF channels, only very few examples have been reported so far. In particular, we outline in this feature recent advances in the use of highly robust and crystalline oxamato- and oxamidato-based MOFs as reactors for the in situ preparation of well-defined catalytically active single atom catalysts (SACS), subnanometer metal nanoclusters (SNMCs) and supramolecular coordination complexes (SCCs). The robustness of selected MOFs permits the post-synthetic (PS) in situ preparation of the desired catalytically active metal species, which can be characterised by single-crystal X-ray diffraction (SC-XRD) taking advantage of its high crystallinity. The strategy highlighted here permits the always challenging large-scale preparation of stable and well-defined SACs, SNMCs and SCCs, exhibiting outstanding catalytic activities.

Metal-Photoswitch Friendship: From Photochromic Complexes to Functional Materials

Cooperative metal-photoswitch interfaces comprise an application-driven field which is based on strategic coupling of metal cations and organic photochromic molecules to advance the behavior of both components, resulting in dynamic molecular and material properties controlled through external stimuli. In this Perspective, we highlight the ways in which metal-photoswitch interplay can be utilized as a tool to modulate a system's physicochemical properties and performance in a variety of structural motifs, including discrete molecular complexes or cages, as well as periodic structures such as metal-organic frameworks. This Perspective starts with photochromic molecular complexes as the smallest subunit in which metal-photoswitch interactions can occur, and progresses toward functional materials. In particular, we explore the role of the metal-photoswitch relationship for gaining fundamental knowledge of switchable electronic and magnetic properties, as well as in the design of stimuli-responsive sensors, optically gated memory devices, catalysts, and photodynamic therapeutic agents. The abundance of stimuli-responsive systems in the natural world only foreshadows the creative directions that will uncover the full potential of metal-photoswitch interactions in the coming years.

Recent Advances in Metal-Organic-Framework-Based Nanocarriers for Controllable Drug Delivery and Release

Metal-organic frameworks (MOFs) have a good designability, a well-defined pore, stimulus responsiveness, a high surface area, and a controllable morphology. Up to now, various MOFs have been widely used as nanocarriers and have attracted lots of attention in the field of drug delivery and release because of their good biocompatibility and high-drug-loading capacity. Herein, we provide a comprehensive summary of MOF-based nanocarriers for drug delivery and release over the last five years. Meanwhile, some representative examples are highlighted in detail according to four categories, including the University of Oslo MOFs, Fe-MOFs, cyclodextrin MOFs, and other MOFs. Moreover, the opportunities and challenges of MOF-based smart delivery vehicles are discussed. We hope that this review will be helpful for researchers to understand the recent developments and challenges of MOF-based drug-delivery systems.

Optimization of Pore-Space-Partitioned Metal–Organic Frameworks Using the Bioisosteric Concept

Pore space partitioning (PSP) is methodically suited for dramatically increasing the density of guest binding sites, leading to the partitioned acs (pacs) platform capable of record-high uptake for CO₂ and small hydrocarbons such as C₂H_x. For gas separation, achieving high selectivity amid PSP-enabled high uptake offers an enticing prospect. Here we aim for high selectivity by introducing the bioisosteric (BIS) concept, a widely used drug design strategy, into the realm of pore-space-partitioned MOFs. New pacs materials have high C₂H₂/CO₂ selectivity of up to 29, high C₂H₂ uptake of up to 144 cm³/g (298 K, 1 atm), and high separation potential of up to 5.3 mmol/g, leading to excellent experimental breakthrough performance. These metrics, coupled with exceptional tunability, high stability, and low regeneration energy, demonstrate the broad potential of the BIS-PSP strategy.

Capture Instead of Release: Defect-Modulated Radionuclide Leaching Kinetics in Metal-Organic Frameworks

Comparison of defect-controlled leaching-kinetics modulation of metal-organic frameworks (MOFs) and porous functionalized silica-based materials was performed on the example of a radionuclide and radionuclide surrogate for the first time, revealing an unprecedented readsorption phenomenon. On a series of zirconium-based MOFs as model systems, we demonstrated the ability to capture and retain >99% of the transuranic ²⁴¹Am radionuclide after 1 week of storage. We report the possibility of tailoring radionuclide release kinetics in MOFs through framework defects as a function of postsynthetically installed organic ligands including cation-chelating crown ether-based linkers. Based on comprehensive analysis using spectroscopy (EXAFS, UV-vis, FTIR, and NMR), X-ray crystallography (single crystal and powder), and theoretical calculations (nine kinetics models and structure simulations), we demonstrated the synergy of radionuclide integration methods, topological restrictions, postsynthetic scaffold modification, and defect engineering. This combination is inaccessible in any other material and highlights the advantages of using well-defined frameworks for gaining fundamental knowledge necessary for the advancement of actinide-based material development, providing a pathway for addressing upcoming challenges in the nuclear waste administration sector.

Catalytic ozone decomposition and adsorptive VOCs removal in bimetallic metal-organic frameworks

Atmospheric ozone has long been a threat to human health, however, rational design of high-performance O₃-decomposition catalysts remains challenging. Herein, we demonstrate the great potential of a series of isomorphous bimetallic MOFs denoted as PCN-250(Fe₂M) (M = Co²⁺, Ni²⁺, Mn²⁺) in catalytic O₃ decomposition. Particularly, PCN-250(Fe₂Co) showed 100% O₃ removal efficiency for a continuous air flow containing 1 ppm O₃ over a wide humidity range (0 ‒ 80% RH) at room temperature. Mechanism studies suggested that the high catalytic performance originated from the introduction of open Co(II) sites as well as its porous structure. Additionally, at low pressures around 10 Pa, PCN-250(Fe₂Co) exhibited high adsorption capacities (89 ‒ 241 mg g^-1) for most VOCs, which are not only a class of hazardous air pollutants but also the precursor of O₃. This work opens up a new avenue to develop advanced air purification materials for O₃ and VOCs removal in one.

Cr-Based MOF for Efficient Adsorption of Au at Low Concentrations

The efficient enrichment and selection of Au are crucial for gold recovery. The adsorption technology is considered to have potential due to the advantages of operation simplicity and green processability. Nevertheless, the poor Au selectivity at low concentrations in complex solutions limits the further application of the adsorption technology. In this work, a novel Cr-based MOF adsorbent was successfully synthesized using 1,2,4-triazole and 4-aminobenzoic acid as ligands. Benefitting from the surface positive charge and extensive chelation and reduction sites, the novel Cr-based MOF exhibited a total adsorption capacity of up to 357 mg/g and excellent adsorption selectivity toward Au(III) in the complex metal mixed solutions, such as simulated sewage ash waste liquid and actual e-waste leachate. Furthermore, the adsorption kinetics, isotherms, and thermodynamics were discussed in depth for investigating the adsorption mechanisms of the MOF. The PXRD and XPS analyses reveal that the adsorption process involves complexation, redox, and electrostatic interactions. We believe that this study of novel Cr-based MOF adsorbents for efficient Au adsorption is meaningful for further application in the gold recovery technology from e-waste.

A microporous chromium-organic framework fabricated via solvent-assisted metal metathesis for C2H2/CO2 separation

Removal of CO₂ or C₂H₄ from C₂H₂ is still a challenging task due to their similar physical-chemical properties. Here, a bifunctional ligand decorated with amino and sulfoxide groups, 5',5''''-sulfonylbis (2'-amino-[1,1':3',1''-terphenyl]-4,4''-dicarboxylic acid) (H₄L), was employed to construct a new microporous iron-organic framework (Fe-MOF) with the formula [(Fe₃O)(L)_1.5(H₂O)₃]_n. This MOF can serve as a parent structure to obtain the isostructural Cr-MOF by solvent-assisted metal metathesis. Furthermore, the gas adsorption and separation performance of these two MOFs were systematically investigated. Compared to Fe-MOF, Cr-MOF shows a moderately higher CO₂, C₂H₂ and C₂H₄ uptake capacity. Additionally, Cr-MOF can selectively adsorb C₂H₂ over CO₂ and C₂H₄. The separation potential towards C₂H₂/C₂H₄ and C₂H₂/CO₂ was further established via IAST calculations of mixture adsorption equilibrium. IAST selectivity values of Cr-MOF are 3.4 for C₂H₂/C₂H₄ and 6.9 for C₂H₂/CO₂ at 298 K and initial pressure, indicating its potential C₂H₂ separation ability.

Construction and application of base-stable MOFs: a critical review

Metal-organic frameworks (MOFs) are a new class of porous crystalline materials constructed from organic ligands and metal ions/clusters. Owing to their unique advantages, they have attracted more and more attention in recent years and numerous studies have revealed their great potential in various applications. Many important applications of MOFs inevitably involve harsh alkaline operational environments. To achieve high performance and long cycling life in these applications, high stability of MOFs against bases is necessary. Therefore, the construction of base-stable MOFs has become a critical research direction in the MOF field. This review gives a historic summary of the development of base-stable MOFs in the last few years. The key factors that can determine the robustness of MOFs under basic conditions are analyzed. We also demonstrate the exciting achievements that have been made by utilizing base-stable MOFs in different applications. In the end, we discuss major challenges for the further development of base-stable MOFs. Some possible methods to address these problems are presented.

Hydrolytically Stable Zr-Based Metal-Organic Framework as a Highly Sensitive and Selective Luminescent Sensor of Radionuclides

Effective detections of radionuclides including uranium and its predominant fission products, for example, iodine, are highly desired owing to their radiotoxicity and potential threat to human health. However, traditional analytical techniques of radionuclides are instrument-demanding, and chemosensors targeted for sensitization of radionuclides remain limited. In this regard, we report a sensitive and selective sensor of UO₂²⁺ and I^- based on the unique quenching behavior of a luminescent Zr-based metal-organic framework, Zr₆O₄(OH)₄(OH)₆(H₂O)₆(TCPE)_1.5·(H₂O)₂₄(C₃H₇NO)₉ (Zr-TCPE). Immobilization of the luminescent tetrakis(4-carboxyphenyl)ethylene (TCPE^4-) linkers by Zr₆ nodes enhances the photoluminescence quantum yield of Zr-TCPE, which facilitates the effective sensing of radionuclides in a "turn-off" manner. Moreover, Zr-TCPE can sensitively and selectively recognize UO₂²⁺ and I^- ions with the lowest limits of detection of 0.67 and 0.87 μg/kg, respectively, of which the former one is much lower than the permissible value (30 μg/L) defined by the U.S. EPA. In addition, Zr-TCPE features excellent hydrolytic stability and can withstand pH conditions ranging from 3 to 11. To facilitate real-world applications, we have further fabricated polyvinylidene fluoride-integrating Zr-TCPE as luminescence-based sensor membranes for on-site sensing of UO₂²⁺ and I^-.