Reversing Electron Transfer Chain for Light-Driven Hydrogen Production in Biotic-Abiotic Hybrid Systems

Recent Progress in Developing Conjugated Polymer-Microorganism Biohybrids for Semi-Artificial Photosynthetic Energy Conversion

Semi-artificial photosynthesis, which merges the precision of synthetic materials with the catalytic versatility of biological systems, offers a transformative route to solar-driven chemical fuel production and sustainable energy conversion. Conjugated polymers, with their high molar absorption coefficients, broad spectral responsiveness, and tunable semiconducting properties, have emerged as key components in advancing semi-artificial photosynthetic biohybrids. Their capacity for targeted surface modification not only facilitates enhanced interfacing with biological catalysts but also optimizes charge transfer across the bio-synthetic interface. This review traces the evolution of conjugated polymer-based biohybrids, highlighting recent advancements that extend microbial light harvesting, support cellular resilience against environmental stress, and optimize charge transfer via precise structure-activity relationships. Furthermore, this review explores the challenges and opportunities in this field, offering a roadmap for the design of durable and high-performance biohybrid systems. Through the integration of conjugated polymers and microorganisms, this review outlines a strategic approach for solar-driven chemical energy conversion, paving the way for eco-friendly energy solutions.

Photocatalytic material-microorganism hybrid systems in water decontamination

Biological processes are widely used technologies for water decontamination, but they are often limited by insufficient bioavailable carbon sources or biorecalcitrant contaminants. The recently developed photocatalytic material-microorganism hybrid (PMH) system combines the light-harvesting capacities of photocatalytic materials with specific enzymatic activities of whole cells, efficiently achieving solar-to-chemical conversion. By integrating the benefits of both photocatalysis and biological processes, the PMH system shows great potential for water decontamination. While recent reviews have focused primarily on its application in green energy development, this review emphasizes the latest advancements in PMH systems for water decontamination, covering various applications, key considerations, and synergistic mechanisms. This review aims to provide a fundamental understanding of the PMH system and explore its broader potential in environmental remediation.

Harnessing Near-Infrared Light for Enhanced Solar Hydrogen Production from Escherichia coli Interfaced with Biocompatible Low-Bandgap Conjugated Polymer Nanosheets

The efficient conversion of solar energy into clean hydrogen fuel presents a promising pathway for sustainable energy production. However, utilizing the full solar spectrum, particularly the near-infrared (NIR) region, remains underexplored in photosynthetic biohybrid systems. In this study, biocompatible, low-bandgap conjugated polymer nanosheets (PyTT-tBAL-HAB) are developed to integrate with non-photosynthetic, non-genetically engineered Escherichia coli (E. coli) for enhanced solar-driven biological hydrogen production. The PyTT-tBAL-HAB nanosheets exhibit unique NIR light absorption properties. Integrating these nanosheets with E. coli facilitates efficient electron transfer, resulting in a 1.96-fold increase in hydrogen production rate under NIR light. Consequently, this photosynthetic biohybrid system achieves a quantum efficiency of 18.36% at 940 nm. This study demonstrates the potential of using low-bandgap conjugated polymer nanosheets as advanced photosensitizers in semi-artificial photosynthetic systems, offering a robust platform for the effective utilization of the solar spectrum.

Efficient and sustained photosynthetic hydrogen production by algae under high light intensity

Cleaner, lower carbon energy is needed for more sustainable development. Algal production of hydrogen directly from water and sunlight is a promising route toward such sustainable energy. However, algae can only produce hydrogen continuously in weak light. We developed a hybrid system using a designed thermosensitive material, poly(N-isopropylacrylamide)-co-poly(butyl acrylate) (PNIPAM-BA), and a photothermal material, graphene oxide (GO), to dynamically sense light intensity. This system regulates the entry of incident light to protect the activity of algal hydrogenase, which enables algae to efficiently produce hydrogen through photosynthesis across a range of light intensities (100-2000 μmol photons·m-2·s-1). Even under the standard maximum solar intensity of 2000 μmol photons·m-2·s-1, we achieved continuous hydrogen production over 25 days with an average hydrogen production rate of 17.53 μmol H2 (mg chlorophyll)-1 h-1. Thus, this study addresses the challenge of continuous hydrogen production by algae under high light intensity, greatly advancing prospects for large-scale outdoor hydrogen production.

Multienergy Codriven Electron Transfer Across the Nano-Bio Interface for Efficient Photobiocatalysis

Integrating biocatalysis with nanophotocatalysis provides a promising pathway to address the knotty environmental and energy problems. However, energy loss during the transfer of extracellular electrons across the nano-bio interface seriously limits the efficiency of whole-cell-based photobiocatalytic systems. Herein, we demonstrate an integrated multienergy codriven reaction platform containing BaTiO3 nanoparticles (BTO) for harvesting mechanical energy from flowing water to elevate the interfacial electric field, BiVO4 quantum dots (BQD) for harvesting light energy to generate photocarriers, and Geobacter sulfurreducens (GS) for accepting photoelectrons to accomplish the biocatalytic reactions. The synergism between the piezoelectric and photoelectric fields significantly promotes the cross-membrane transport of photoelectrons, contributing to enhanced acetate metabolism, electron transfer, and energy synthesis of GS microbes. Such well-designed BQD/BTO-GS hybrids result in the simultaneous degradation of organic contaminants and detoxification of heavy metals in water with approximately 100% treatment efficiency. The rates of tetracycline (TC) oxidation and Cr(VI) reduction are determined to be 32.8 and 9.58 times higher than that of GS biocatalysis, respectively. Our photobiocatalytic platform exhibits an exceptional apparent quantum yield of 15.54% at 400 nm, exceeding those of most reported abiotic-biotic photobiocatalytic systems. Further investigation verifies the extensibility of our multienergy codriven strategy to the other nano-bio hybrids for enhancing the biocatalytic efficiencies (such as methanogenesis, CO2 fixation, and denitrification), thus offering an inspiring platform for energy and environmental applications. This work not only presents crucial insights into the mechanism of the water-energy nexus but also provides a paradigm for the construction of sustainable reaction systems via multienergy harnessing.

Site Directed Mutagenesis of the Cyc2 Outer Membrane Protein from Acidithiobacillus ferrooxidans Reveals a Critical Role for Bound Iron Atoms in Extracellular Electron Transfer

Extracellular electron transfer (EET) processes by metal respiratory bacteria rely on outer membrane proteins (OMPs) to exchange electrons across the insulating cell membrane. The most studied OMPs from metal reducing bacteria contain multiple sequential heme groups. However, many iron-oxidizing bacteria, including the industrial bioleaching microbe Acidithiobacillus ferrooxidans, contain monoheme OMPs and the mechanism of electron transfer through these smaller structures has not been elucidated. Computational modeling was previously used to predict two iron ion binding sites in the Cyc2 protein structure from A. ferrooxidans. To determine if these binding sites are critical for protein function, the monoheme Cyc2 OMP from A. ferrooxidans is recombinantly expressed in E. coli outer membrane vesicles (OMVs) which are then incorporated into biomimetic cell-membrane supported lipid bilayers (SLB) on electrodes to measure electron transfer. Site-directed mutagenesis is used to disrupt the putative ion binding sites predicted from modeling to elucidate the mechanism. It is confirmed that the Cyc2 protein is capable of EET without the need for soluble iron or other accessory proteins. These results confirm the critical role of bound metal ions in the A. ferrooxidans EET mechanism, and it is expected that homologous monoheme OMPs will have similar conduction pathways.

Natural biomolecules for cell-interface engineering

Cell-interface engineering is a way to functionalize cells through direct or indirect self-assembly of functional materials around the cells, showing an enhancement to cell functions. Among the materials used in cell-interface engineering, natural biomolecules play pivotal roles in the study of biological interfaces, given that they have good advantages such as biocompatibility and rich functional groups. In this review, we summarize and overview the development of studies of natural biomolecules that have been used in cell-biointerface engineering and then review the five main types of biomolecules used in constructing biointerfaces, namely DNA polymers, amino acids, polyphenols, proteins and polysaccharides, to show their applications in green energy, biocatalysis, cell therapy and environmental protection and remediation. Lastly, the current prospects and challenges in this area are presented with potential solutions to solve these problems, which in turn benefits the design of next-generation cell engineering.

Near-Native Imaging of Metal Ion-Initiated Cell State Transition

Metal ions are indispensable to life, as they can serve as essential enzyme cofactors to drive fundamental biochemical reactions, yet paradoxically, excess is highly toxic. Higher-order cells have evolved functionally distinct organelles that separate and coordinate sophisticated biochemical processes to maintain cellular homeostasis upon metal ion stimuli. Here, we uncover the remodeling of subcellular architecture and organellar interactome in yeast initiated by several metal ion stimulations, relying on near-native three-dimensional imaging, cryo-soft X-ray tomography. The three-dimensional architecture of intact yeast directly shows that iron or manganese triggers a hormesis-like effect that promotes cell proliferation. This process leads to the reorganization of organelles in the preparation for division, characterized by the polar distribution of mitochondria, an increased number of lipid droplets (LDs), volume shrinkage, and the formation of a hollow structure. Additionally, vesicle-like structures that detach from the vacuole are observed. Oppositely, cadmium or mercury causes stress-associated phenotypes, including mitochondrial fragmentation, LD swelling, and autophagosome formation. Notably, the organellar interactome, encompassing the interactions between mitochondria and LDs and those between the nuclear envelope and LDs, is quantified and exhibits alteration with multifaceted features in response to different metal ions. More importantly, the dynamics of organellar architecture render them more sensitive biomarkers than traditional approaches for assessing the cell state. Strikingly, yeast has a powerful depuration capacity to isolate and transform the overaccumulated cadmium in the vacuole, mitochondria, and cytoplasm as a high-value product, quantum dots. This work presents the possibility of discovering fundamental links between organellar morphological characteristics and the cell state.

Supramolecular Reconstruction of Self-Assembling Photosensitizers for Enhanced Photocatalytic Hydrogen Evolution

Natural photosynthetic systems require spatiotemporal organization to optimize photosensitized reactions and maintain overall efficiency, involving the hierarchical self-assembly of photosynthetic components and their stabilization through synergistic interactions. However, replicating this level of organization is challenging due to the difficulty in efficiently communicating supramolecular nano-assemblies with nanoparticles or biological architectures, owing to their dynamic instability. Herein, we demonstrate that the supramolecular reconstruction of self-assembled amphiphilic rhodamine B nanospheres (RN) through treatment with metal-phenolic coordination complexes results in the formation of a stable hybrid structure. This reconstructed structure enhances electron transfer efficiency, leading to improved photocatalytic performance. Due to the photoluminescence quenching property of RN and its electronic synergy with tannic acid (T) and zirconium (Z), the supramolecular complexes of hybrid nanospheres (RNTxZy) with Pt nanoparticles or a biological workhorse, Shewanella oneidensis MR-1, showed marked improvement in photocatalytic hydrogen production. The supramolecular hybrid particles with a metal-phenolic coordination layer showed 5.6- and 4.0-fold increases, respectively, in the productivities of hydrogen evolution catalyzed by Pt (Pt/RNTxZy) and MR-1 (M/RNTxZy), respectively. These results highlight the potential for further advancements in the structural and photochemical control of supramolecular nanomaterials for energy harvesting and bio-hybrid systems.

Mineralizing Biofilm towards Sustainable Conversion of Plastic Wastes to Hydrogen

The integration of inorganic materials with biological machinery to convert plastics into fuels offers a promising strategy to alleviate environmental pollution and energy crisis. Herein, we develop a type of hybrid living material via biomineralization of CdS onto Shewanella oneidensis-based biofilm, which is capable of sustainable hydrogen production from poly(lactic acid) (PLA) wastes under daylight. We reveal that the formed biofilm microstructure provides an independent anaerobic microenvironment that simultaneously supports cellular viability, maintains hydrogenase activity, and preserves the functional stability of CdS, giving rise to the efficient plastic-to-hydrogen conversion efficiency as high as 3751 μmol H2 g-1 PLA. Besides, by genetically engineering transmembrane pili conduit and incorporating conductive nanomaterials to strengthen the electron transfer across cellular interface and biofilm matrices, we show that the conversion efficiency is further enhanced to 5862 μmol H2 g-1 PLA. Significantly, we exhibit that a long-term sustainable plastic-to-hydrogen conversion of 63 d could be achieved by periodically replenishing PLA wastes. Overall, by the synergistic integration of biotic-abiotic characteristics the developed biofilm-based biomineralized hybrid living material is anticipated to provide a new platform toward the efficient conversion of plastic wastes into valuable fuels, and bridge the gap between environmental contamination and green energy production.

Enhancing degradation of antibiotic-combined pollutants by a hybrid system containing advanced oxidation and microbial treatment, a review

Antibiotics often co-exist with other pollutants, posing a significant threat to ecosystems. This review first examines the applications and limitations of microbial treatments for various types of antibiotic-combined pollutants. Then, it explores the mechanisms and application of hybrid systems that integrate advanced oxidation with microbial treatment, categorized into two-stage and intimately hybrid systems. Finally, the review highlights key knowledge gaps in hybrid systems and provides new insight into the removal of combined pollutants.

Harnessing microbes to pioneer environmental biophotoelectrochemistry

In seeking sustainable environmental strategies, microbial biophotoelectrochemistry (BPEC) systems represent a significant advancement. In this review, we underscore the shift from conventional bioenergy systems to sophisticated BPEC applications, emphasizing their utility in leveraging solar energy for essential biochemical conversions. Recent progress in BPEC technology has facilitated improved photoelectron transfer and system stability, resulting in substantial advancements in carbon and nitrogen fixation, degradation of pollutants, and energy recovery from wastewater. Advances in system design and synthetic biology have expanded the potential of BPEC for environmental clean-up and sustainable energy generation. We also highlight the challenges of environmental BPEC systems, ranging from performance improvement to future applications.

Bifunctional sludge-derived redox carbon dots with photoelectron storage and delivery properties for ammonia production by photosensitized Shewanella oneidensis MR-1

Combining the light-harvesting capabilities of photosensitizers with microbial catalysis shows great potential in solar-driven biomanufacturing. However, little information is available about the effects of photosensitizers on the photoelectron transport during the dissimilatory nitrate reduction to ammonium (DNRA) process. Herein, redox carbon dots (CDs-500) were prepared from sludge via the pyrolysis-Fenton reaction and then used to construct a photosynthetic system with Shewanella oneidensis MR-1. The MR-1/CDs-500 photosynthetic system showed a 5.9-fold increase in ammonia production (4.9 mmol(NH3)·g-1(protein)·h-1) with a high selectivity of 94.0 %. The photoelectrons were found to be stored in CDs-500 and transferred into the cells. During the inward electron transport, the intracellular CDs-500 could be used as the direct photoelectron transfer stations between outer membrane cytochrome c and DNRA-related enzymes without the involvement of CymA and MtrA. This work provides a new method for converting waste into functional catalysts and increases solar-driven NH3 production to a greater extent.

Light-driven biodegradation of chloramphenicol by photosensitized Shewanella oneidensis MR-1

Efficient and sustainable degradation of chloramphenicol has piqued the interest of the scientific community. This study constructed a photosensitized biohybrid system using Shewanella oneidensis MR-1 and cadmium sulfide (CdS). This system could efficiently degrade chloramphenicol with robust stability. Inhibitor experiments and transcriptome analysis revealed that reduced nicotinamide adenine dinucleotide dehydrogenase, iron-sulfur cluster, menaquinone, cytochrome b561, cytochrome c, cytochrome P450, and formate dehydrogenase/hydrogenase are involved in direct electron transfer from S. oneidensis MR-1 to photogenerated holes of CdS. The S. oneidensis MR-1/CdS biohybrid alleviated chloramphenicol-induced physiological impairments, which can be attributed to the decreased levels of extracellular polymeric substances, malondialdehyde, and extracellular membrane permeability and the increased levels of superoxide dismutase and catalase activities. The GCN5-related N-acetyltransferase, alkene reductase, and carboxymuconolactone decarboxylase promoted the inactivation and further degradation of chloramphenicol. In summary, this study demonstrated the potential applications of the S. oneidensis MR-1/CdS biohybrid in the remediation of chloramphenicol contamination.

Assembly strategies for microbe-material hybrid systems in solar energy conversion

Microbe-material hybrid systems which facilitate the solar-driven synthesis of high-value chemicals, harness the unique capabilities of microbes, maintaining the high-selectivity catalytic abilities, while concurrently incorporating exogenous materials to confer novel functionalities. The effective assembly of both components is essential for the overall functionality of microbe-material hybrid systems. Herein, we conducted a critical review of microbe-material hybrid systems for solar energy conversion focusing on the perspective of interface assembly strategies between microbes and materials, which are categorized into five types: cell uptake, intracellular synthesis, extracellular mineralization, electrostatic adsorption, and cell encapsulation. Moreover, this review elucidates the mechanisms by which microbe-material hybrid systems convert elementary substrates, such as carbon dioxide, nitrogen, and water, into high-value chemicals or materials for energy generation.

Deciphering the Role of Inorganic Nanoparticles' Surface Functionalization on Biohybrid Microbial Photoelectrodes

Shedding light on the interaction between inorganic nanoparticles (NPs) and living microorganisms is at the basis of the development of biohybrid technologies with improved performance. Au NPs have been shown to be able to improve the extracellular electron transfer (EET) in intact bacterial cells interfaced with an electrode; however, detailed information on the role of NP-surface properties in their interaction with bacterial membranes is still lacking. Herein, we unveil how the surface functionalization of Au NPs influences their interaction with photosynthetic bacteria, focusing on cell morphology, growth kinetics, NPs localization, and electrocatalytic performance. We show that functionalization of Au NPs with cysteine in the zwitterionic form results in a uniform NPs distribution in purple bacteria, specifically locating the NPs within the outer-membrane/periplasmic space of bacterial cells. These biohybrid cells, when coupled with an electrode, exhibit enhanced EET and increased (photo)current generation, paving the way for the future development of rationally designed biohybrid electrochemical systems.

Antifouling characteristics and mechanisms in visible-light photocatalytic membrane bioreactor based on g-C3N4 modified membrane

A novel visible-light photocatalytic membrane bioreactor (R3) was constructed for membrane fouling control and effluent quality improvement. Specially, g-C3N4 modified membrane was evaluated for the performance of synergistic separation and photocatalysis. Another two parallel reactors, MBRs with ceramic membrane (R1) and g-C3N4 membrane in dark condition (R2), were operated synchronously for comparison. A satisfactory effluent quality was obtained in R3 with COD and NH4+-N around 22.0 mg/L and 1.02 mg/L during 60-day operation, which was superior to R1 (27.8, 1.42 mg/L) and R2 (29.9, 2.26 mg/L). The thickness of cake layer on membranes in R3 (2.46 μm) was thinner than R1 (3.52 μm) and R2 (4.97 μm) after operation, indicating the introduction of visible light could effectively mitigate membranes fouling. Moreover, microorganism community analysis revealed that visible light increased the relative abundance of Bacteroidetes and Chryseolinea, which not only enhanced the activity of microorganisms in metabolizing organic nutrients, but also improved the transfer and utilization of photogenerated electrons on the semiconductor-microorganism interface. The active aromatic protein metabolism and the upregulated related enzymes further demonstrated the synergistic effect of photocatalysis and microbial communities on the membrane fouling mitigation. This work provides a novel application of photocatalysis into antibiofouling effect in MBRs, and opens a strategy for bacteria inactivation and foulants removal with eco-friendly solar energy.

A biocompatible surface display approach in Shewanella promotes current output efficiency

The biology-material hybrid method for chemical-electricity conversion via microbial fuel cells (MFCs) has garnered significant attention in addressing global energy and environmental challenges. However, the efficiency of these systems remains unsatisfactory due to the complex manufacturing process and limited biocompatibility. To overcome these challenges, here, we developed a simple bio-inorganic hybrid system for bioelectricity generation in Shewanella oneidensis (S. oneidensis) MR-1. A biocompatible surface display approach was designed, and silver-binding peptide AgBP2 was expressed on the cell surface. Notably, the engineered Shewanella showed a higher electrochemical sensitivity to Ag+, and a 60 % increase in power density was achieved even at a low concentration of 10 μM Ag+. Further analysis revealed significant upregulations of cell surface negative charge intensity, ATP metabolism, and reducing equivalent (NADH/NAD+) ratio in the engineered S. oneidensis-Ag nanoparticles biohybrid. This work not only provides a novel insight for electrochemical biosensors to detect metal ions, but also offers an alternative biocompatible surface display approach by combining compatible biomaterials with electricity-converting bacteria for advancements in biohybrid MFCs.

Revisiting Solar Energy Flow in Nanomaterial-Microorganism Hybrid Systems

Nanomaterial-microorganism hybrid systems (NMHSs), integrating semiconductor nanomaterials with microorganisms, present a promising platform for broadband solar energy harvesting, high-efficiency carbon reduction, and sustainable chemical production. While studies underscore its potential in diverse solar-to-chemical energy conversions, prevailing NMHSs grapple with suboptimal energy conversion efficiency. Such limitations stem predominantly from an insufficient systematic exploration of the mechanisms dictating solar energy flow. This review provides a systematic overview of the notable advancements in this nascent field, with a particular focus on the discussion of three pivotal steps of energy flow: solar energy capture, cross-membrane energy transport, and energy conversion into chemicals. While key challenges faced in each stage are independently identified and discussed, viable solutions are correspondingly postulated. In view of the interplay of the three steps in affecting the overall efficiency of solar-to-chemical energy conversion, subsequent discussions thus take an integrative and systematic viewpoint to comprehend, analyze and improve the solar energy flow in the current NMHSs of different configurations, and highlighting the contemporary techniques that can be employed to investigate various aspects of energy flow within NMHSs. Finally, a concluding section summarizes opportunities for future research, providing a roadmap for the continued development and optimization of NMHSs.

Engineering bionanoreactor in bacteria for efficient hydrogen production

Hydrogen production through water splitting is a vital strategy for renewable and sustainable clean energy. In this study, we developed an approach integrating nanomaterial engineering and synthetic biology to establish a bionanoreactor system for efficient hydrogen production. The periplasmic space (20 to 30 nm) of an electroactive bacterium, Shewanella oneidensis MR-1, was engineered to serve as a bionanoreactor to enhance the interaction between electrons and protons, catalyzed by hydrogenases for hydrogen generation. To optimize electron transfer, we used the microbially reduced graphene oxide (rGO) to coat the electrode, which improved the electron transfer from the electrode to the cells. Native MtrCAB protein complex on S. oneidensis and self-assembled iron sulfide (FeS) nanoparticles acted in tandem to facilitate electron transfer from an electrode to the periplasm. To enhance proton transport, S. oneidensis MR-1 was engineered to express Gloeobacter rhodopsin (GR) and the light-harvesting antenna canthaxanthin. This led to efficient proton pumping when exposed to light, resulting in a 35.6% increase in the rate of hydrogen production. The overexpression of native [FeFe]-hydrogenase further improved the hydrogen production rate by 56.8%. The bionanoreactor engineered in S. oneidensis MR-1 achieved a hydrogen yield of 80.4 μmol/mg protein/day with a Faraday efficiency of 80% at a potential of -0.75 V. This periplasmic bionanoreactor combines the strengths of both nanomaterial and biological components, providing an efficient approach for microbial electrosynthesis.

Understanding Flexdispersion: Structure-Function Relationship Studies of Organic Amphiphilic Ligands

Since inorganic nanoparticles have unique properties that differ from those of bulk materials, their material applications have attracted attention in various fields. In order to utilize inorganic nanoparticles for functional materials, they must be dispersed without agglomeration. Therefore, the surfaces of inorganic nanoparticles are typically modified with organic ligands to improve their dispersibility. Nevertheless, the relationship between the tail group structure in organic ligands and the dispersibility of inorganic nanoparticles in organic solvents remains poorly understood. We previously developed amphiphilic ligands that consist of ethylene glycol chains and alkyl chains to disperse inorganic nanoparticles in a variety of organic solvents. However, the structural requirements for amphiphilic ligands to "flexibly" disperse nanoparticles in less polar to polar solvents are still unclear. Here, we designed and synthesized several phosphonic acid ligands for structure-function relationship studies of flexdispersion. Dynamic light scattering analysis and visible light transmittance measurements revealed that the ratio of alkyl/ethylene glycol chains in organic ligands alone does not determine the dispersibility of the nanoparticles in organic solvents, but the arrangement of the individual chains also has an effect. From a practical application standpoint, it is preferable to design ligands with ethylene glycol chains on the outside relative to the particle surface.

Engineering of bespoke photosensitiser-microbe interfaces for enhanced semi-artificial photosynthesis

Biohybrid systems for solar fuel production integrate artificial light-harvesting materials with biological catalysts such as microbes. In this perspective, we discuss the rational design of the abiotic-biotic interface in biohybrid systems by reviewing microbes and synthetic light-harvesting materials, as well as presenting various approaches to coupling these two components together. To maximise performance and scalability of such semi-artificial systems, we emphasise that the interfacial design requires consideration of two important aspects: attachment and electron transfer. It is our perspective that rational design of this photosensitiser-microbe interface is required for scalable solar fuel production. The design and assembly of a biohybrid with a well-defined electron transfer pathway allows mechanistic characterisation and optimisation for maximum efficiency. Introduction of additional catalysts to the system can close the redox cycle, omitting the need for sacrificial electron donors. Studies that electronically couple light-harvesters to well-defined biological entities, such as emerging photosensitiser-enzyme hybrids, provide valuable knowledge for the strategic design of whole-cell biohybrids. Exploring the interactions between light-harvesters and redox proteins can guide coupling strategies when translated into larger, more complex microbial systems.

Alcohol-Processable All-Polymer n-Type Thermoelectrics

The general strategy for n-type organic thermoelectric is to blend n-type conjugated polymer hosts with small molecule dopants. In this work, all-polymer n-type thermoelectric is reported by dissolving a novel n-type conjugated polymer and a polymer dopant, poly(ethyleneimine) (PEI), in alcohol solution, followed by spin-coating to give polymer host/polymer dopant blend film. To this end, an alcohol-soluble n-type conjugated polymer is developed by attaching polar and branched oligo (ethylene glycol) (OEG) side chains to a cyano-substituted poly(thiophene-alt-co-thiazole) main chain. The main chain results in the n-type property and the OEG side chain leads to the solubility in hexafluorineisopropanol (HFIP). In the polymer host/polymer dopant blend film, the Coulombic interaction between the dopant counterions and the negatively charged polymer chains is reduced and the ordered stacking of the polymer host is preserved. As a result, the polymer host/polymer dopant blend exhibits the power factor of 36.9 µW m-1 K-1, which is one time higher than that of the control polymer host/small molecule dopant blend. Moreover, the polymer host/polymer dopant blend shows much better thermal stability than the control polymer host/small molecule dopant blend. This research demonstrates the high performance and excellent stability of all-polymer n-type thermoelectric.

Operando Spectroscopic Elucidation of the Bubble Sunshade Effect in Inorganic-Biological Hybrids for Photosynthetic Hydrogen Production

Hydrogen production by photosynthetic hybrid systems (PBSs) offers a promising avenue for renewable energy. However, the light-harvesting efficiency of PBSs remains constrained due to unclear intracellular kinetic factors. Here, we present an operando elucidation of the sluggish light-harvesting behavior for existing PBSs and strategies to circumvent them. By quantifying the spectral shift in the structural color scattering of individual PBSs during the photosynthetic process, we observe the accumulation of product hydrogen bubbles on their outer membrane. These bubbles act as a sunshade and inhibit light absorption. This phenomenon elucidates the intrinsic constraints on the light-harvesting efficiency of PBSs. The introduction of a tension eliminator into the PBSs effectively improves the bubble sunshade effect and results in a 4.5-fold increase in the light-harvesting efficiency. This work provides valuable insights into the dynamics of transmembrane transport gas products and holds the potential to inspire innovative designs for improving the light-harvesting efficiency of PBSs.

Fulvic acid-mediated efficient anaerobic digestion for kitchen wastewater: Electrochemical and biochemical mechanisms

Fulvic acid, prevalent in humus derived from the anaerobic digestion of kitchen wastewater, is crucial in organic matter transformation. However, its effects and underlying mechanisms remain unclear. In this study, the fate of anaerobic digestion of artificial and kitchen wastewater with different fulvic acid contents was investigated. The results showed that 125 mg/L fulvic acid resulted in a 64.02 and 51.72 % increase in methane production in synthetic and kitchen wastewater, respectively. Fulvic acid acted as an electron mediator and increased substrate oxidation by boosting NAD and ATP levels, thereby increasing microbial metabolic rates and ensuring an adequate substrate for methane generation. Isotope analysis suggested that fulvic acid boosts the conversion of volatile fatty acids to methane via the interspecies electron transfer pathway. Gene expression analysis revealed that cytochrome c, FAD, and other electron transport coenzymes were upregulated by fulvic acid, thereby enhancing substrate utilisation and biogas quality. Fulvic acid presented a dual stimulatory and inhibitory effect on anaerobic digestion, with concentrations over 125 mg/L diminishing its positive impact. This dual effect may stem from the properties and concentrations of fulvic acid. This study revealed the effect mechanism of fulvic acid and provided insights into the humus performance in anaerobic digestion.

Conjugated Polymer/Recombinant Escherichia coli Biohybrid Systems for Photobiocatalytic Hydrogen Production

Biohybrid photocatalysts are composite materials that combine the efficient light-absorbing properties of synthetic materials with the highly evolved metabolic pathways and self-repair mechanisms of biological systems. Here, we show the potential of conjugated polymers as photosensitizers in biohybrid systems by combining a series of polymer nanoparticles with engineered Escherichia coli cells. Under simulated solar light irradiation, the biohybrid system consisting of fluorene/dibenzo [b,d]thiophene sulfone copolymer (LP41) and recombinant E. coli (i.e., a LP41/HydA BL21 biohybrid) shows a sacrificial hydrogen evolution rate of 3.442 mmol g-1 h-1 (normalized to polymer amount). It is over 30 times higher than the polymer photocatalyst alone (0.105 mmol g-1 h-1), while no detectable hydrogen was generated from the E. coli cells alone, demonstrating the strong synergy between the polymer nanoparticles and bacterial cells. The differences in the physical interactions between synthetic materials and microorganisms, as well as redox energy level alignment, elucidate the trends in photochemical activity. Our results suggest that organic semiconductors may offer advantages, such as solution processability, low toxicity, and more tunable surface interactions with the biological components over inorganic materials.

Dual-mode harvest solar energy for photothermal Cu2-xSe biomineralization and seawater desalination by biotic-abiotic hybrid

Biotic-abiotic hybrid photocatalytic system is an innovative strategy to capture solar energy. Diversifying solar energy conversion products and balancing photoelectron generation and transduction are critical to unravel the potential of hybrid photocatalysis. Here, we harvest solar energy in a dual mode for Cu2-xSe nanoparticles biomineralization and seawater desalination by integrating the merits of Shewanella oneidensis MR-1 and biogenic nanoparticles. Photoelectrons generated by extracellular Se0 nanoparticles power Cu2-xSe synthesis through two pathways that either cross the outer membrane to activate periplasmic Cu(II) reduction or are directly delivered into the extracellular space for Cu(I) evolution. Meanwhile, photoelectrons drive periplasmic Cu(II) reduction by reversing MtrABC complexes in S. oneidensis. Moreover, the unique photothermal feature of the as-prepared Cu2-xSe nanoparticles, the natural hydrophilicity, and the linking properties of bacterium offer a convenient way to tailor photothermal membranes for solar water production. This study provides a paradigm for balancing the source and sink of photoelectrons and diversifying solar energy conversion products in biotic-abiotic hybrid platforms.

Interspecies cooperation-driven photogenerated electron transfer processes and efficient multi-pathway nitrogen removal in the g-C3N4-anammox consortia biohybrid system

Photocatalytic materials-microbial biohybrid systems pave the way for solar-driven wastewater nitrogen removal. In this study, interspecies cooperation in photogenerated electron transfer and efficient nitrogen removal mechanism in the g-C3N4-anammox consortia biohybrid system were first deciphered. The results indicated that the essential extracellular electron carriers (cytochrome c and flavin) for anammox genomes were provided by associated bacteria (BACT3 and CHLO2). This cooperation, regulated by the ArcAB system and electron transfer flavoprotein, made anammox bacteria the primary photogenerated electron sink. Furthermore, an efficient photogenerated electron harness was used to construct a reductive glycine pathway (rGlyP) in anammox bacteria inventively, which coexisted with the Wood-Ljungdahl pathway (WLP), constituting a dual-pathway carbon fixation model, rGlyP-WLP. Carbon fixation products efficiently contributed to the tricarboxylic acid cycle, while inhibiting electron diversion in anabolism. Photogenerated electrons were targeted channeled into nitrogen metabolism-available electron carriers, enhancing anammox and dissimilatory nitrate reduction to ammonium (DNRA) processes. Moreover, ammonia assimilation by the glycine cleavage system in rGlyP established an alternative ammonia removal route. Ultimately, multi-pathway nitrogen removal involving anammox, DNRA, and rGlyP achieved 100 % ammonia removal and 94.25 % total nitrogen removal efficiency. This study has expanded understanding of anammox metabolic diversity, enhancing its potential application in carbon-neutral wastewater treatment.

Modularized Engineering of Shewanella oneidensis MR-1 for Efficient and Directional Synthesis of 5-Aminolevulinic Acid

Shewanella oneidensis MR-1 has found widespread applications in pollutant transformation and bioenergy production, closely tied to its outstanding heme synthesis capabilities. However, this significant biosynthetic potential is still unexploited so far. Here, we turned this bacterium into a highly-efficient bio-factory for green synthesis of 5-Aminolevulinic Acid (5-ALA), an important chemical for broad applications in agriculture, medicine, and the food industries. The native C5 pathway genes of S. oneidensis was employed, together with the introduction of foreign anti-oxidation module, to establish the 5-ALA production module, resulting 87-fold higher 5-ALA yield and drastically enhanced tolerance than the wild type. Furthermore, the metabolic flux was regulated by using CRISPR interference and base editing techniques to suppress the competitive pathways to further improve the 5-ALA titer. The engineered strain exhibited 123-fold higher 5-ALA production capability than the wild type. This study not only provides an appealing new route for 5-ALA biosynthesis, but also presents a multi-dimensional modularized engineering strategy to broaden the application scope of S. oneidensis.

Biological Self-Assembled Transmembrane Electron Conduits for High-Efficiency Ammonia Production in Microbial Electrosynthesis

Usually, CymA is irreplaceable as the electron transport hub in Shewanella oneidensis MR-1 bidirectional electron transfer. In this work, biologically self-assembled FeS nanoparticles construct an artificial electron transfer route and implement electron transfer from extracellular into periplasmic space without CymA involvement, which present similar properties to type IV pili. Bacteria are wired up into a network, and more electron transfer conduits are activated by self-assembled transmembrane FeS nanoparticles (electron conduits), thereby substantially enhancing the ammonia production. In this study, we achieved an average NH4+-N production rate of 391.8 μg·h-1·L reactor-1 with the selectivity of 98.0% and cathode efficiency of 65.4%. Additionally, the amide group in the protein-like substances located in the outer membrane was first found to be able to transfer electrons from extracellular into intracellular with c-type cytochromes. Our work provides a new viewpoint that contributes to a better understanding of the interconnections between semiconductor materials and bacteria and inspires the exploration of new electron transfer chain components.

External Electrons Directly Stimulate Escherichia coli for Enhancing Biological Hydrogen Production

External electric field has the potential to influence metabolic processes such as biological hydrogen production in microorganisms. Based on this concept, we designed and constructed an electroactive hybrid system for microbial biohydrogen production under an electric field comprised of polydopamine (PDA)-modified Escherichia coli (E. coli) and Ni foam (NF). In this system, electrons generated from NF directly migrate into E. coli cells to promote highly efficient biocatalytic hydrogen production. Compared to that generated in the absence of electric field stimulation, biohydrogen production by the PDA-modified E. coli-based system is significantly enhanced. This investigation has demonstrated the mechanism for electron transfer in a biohybrid system and gives insight into precise basis for the enhancement of hydrogen production by using the multifield coupling technology.

Photoelectron Migration Boosted by Hollow Double-Shell Dyads Based on Covalent Organic Frameworks for Highly Efficient Photocatalytic Hydrogen Generation

Photocatalytic hydrogen production based on noble metal-free systems is a promising technology for the conversion of solar energy into green hydrogen, it is pivotal and challenging to tailor-make photocatalysts for achieving high photocatalytic efficiency. Herein, we reported a hollow double-shell dyad through uniformly coating covalent organic frameworks (COFs) on the surface of hollow Co9S8. The double shell architecture enhances the scattering and refraction efficiency of incident light, shortens the transmission distance of the photogenerated charge carriers, and exposes more active sites for photocatalytic conversion. The hydrogen evolution rate is as high as 23.15 mmol g-1 h-1, which is significantly enhanced when compared with that of their physical mixture (0.30 mmol g-1 h-1) and Pt-based counterpart (11.84 mmol g-1 h-1). This work provides a rational approach to the construction of noble-metal-free photocatalytic systems based on COFs to enhance hydrogen evolution performance.

Nitrate removal by anammox bacteria utilizing photoexcited electrons via inward extracellular electron transfer channel

Dissimilatory nitrate reduction to ammonium (DNRA) has been found to occur in some anammox bacteria species, and the DNRA metabolites (nitrite and ammonium) can further be removed to nitrogen from water. However, the activation of DNRA pathway of anammox bacteria is usually limited by the access to electron donors. Herein, we constructed a photosensitized hybrid system combining anammox bacteria (Candidatus Kuenenia stuttgartiensis and Candidatus Brocadia anammoxidans) with CdS nanoparticles semiconductor for energy-efficient NO3- removal. Such photosensitized anammox-CdS hybrid systems achieved NO3- removal with an average efficiency of 88% (the maximum of 91%) and a N2 selectivity of 72%, only with photoexcited electrons as donors. The DNRA-anammox metabolism of anammox bacteria was proved to responsible for NO3- removal via inward extracellular electron transfer channel. The greatly up-regulated genes encoding c-type cytochrome proteins (5 or 11 hemes) in the outer membrane, c-type cytochrome protein (4 hemes) and electron transport protein RnfA-E in the inner membrane, ferredoxin (2Fe-2S) in the cytoplasm and c-type cytochrome bc1 in anammoxosome membrane were supposed to play key roles in the inward extracellular electron transfer pathway. This work provides a novel insight into the design of the biotic-abiotic hybrid photosynthetic systems, and opens a new strategy for light-driven NO3- removal from the perspective of light energy input.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

P-doped Mn0.5Cd0.5S coupled with cobalt porphyrin as co-catalyst for the photocatalytic water splitting without using sacrificial agents

Photocatalytic water splitting over semiconductors is an important approach to solve the energy demand of human beings. Most photocatalytic H2 generation reactions are conducted in the presence of sacrificial agent. However, the use of sacrificial reagents increases the cost of hydrogen generation. Realizing photocatalytic water splitting for hydrogen production without the addition of sacrificial agents is a major challenge for photocatalysts. The porphyrin MTCPPOMe and P doped MnxCd1-xS make a significant contribution in facilitating the MnxCd1-xS photocatalytic pure water splitting to H2 reaction. Herein, a novel MTCPPOMe/P-MnxCd1-xS (M = 2H, Fe, Co, Ni) composite catalyst which can efficiently split pure water without using sacrificial agents is developed. As a result, the H2 generation rate of CoTCPPOMe/P-Mn0.5Cd0.5S is as high as 2.10 μmol h-1, which is 9.1 and 4.2 times higher than that of Mn0.5Cd0.5S (MCS) and P-Mn0.5Cd0.5S (P-MCS), respectively. P doped MnxCd1-xS inhibits the recombination of photogenerated carriers, and introduction of MTCPPOMe as co-catalyst enhances the reduction capacity. In summary, an efficient and economical photocatalystis prepared for pure water splitting to prepare hydrogen.

Nanoarmor: cytoprotection for single living cells

Single cell modification or hybridization technology has become a popular direction in bioengineering in recent years, with applications in clean energy, environmental stewardship, and sustainable human development. Here, we draw attention to nanoarmor, a representative achievement of cytoprotection and functionalization technology. The fundamental principles of nanoarmor need to be studied with input from multiple disciplines, including biology, chemistry, and material science. In this review, we explain the role of nanoarmor and review progress in its applications. We also discuss three main challenges associated with its development: self-driving ability, heterojunction characteristics, and mineralization formation. Finally, we propose a preliminary classification system for nanoarmor.

Engineering artificial photosynthesis based on rhodopsin for CO2 fixation

Microbial rhodopsin, a significant contributor to sustaining life through light harvesting, holds untapped potential for carbon fixation. Here, we construct an artificial photosynthesis system which combines the proton-pumping ability of rhodopsin with an extracellular electron uptake mechanism, establishing a pathway to drive photoelectrosynthetic CO2 fixation by Ralstonia eutropha (also known as Cupriavidus necator) H16, a facultatively chemolithoautotrophic soil bacterium. R. eutropha is engineered to heterologously express an extracellular electron transfer pathway of Shewanella oneidensis MR-1 and Gloeobacter rhodopsin (GR). Employing GR and the outer-membrane conduit MtrCAB from S. oneidensis, extracellular electrons and GR-driven proton motive force are integrated into R. eutropha's native electron transport chain (ETC). Inspired by natural photosynthesis, the photoelectrochemical system splits water to supply electrons to R. eutropha via the Mtr outer-membrane route. The light-activated proton pump - GR, supported by canthaxanthin as an antenna, powers ATP synthesis and reverses the ETC to regenerate NADH/NADPH, facilitating R. eutropha's biomass synthesis from CO2. Overexpression of a carbonic anhydrase further enhances CO2 fixation. This artificial photosynthesis system has the potential to advance the development of efficient photosynthesis, redefining our understanding of the ecological role of microbial rhodopsins in nature.

Fe3 O4 nanozyme coating enhances light-driven biohydrogen production in self-photosensitized Shewanella oneidensis-CdS hybrid systems

Solar-driven biohybrid systems that produce chemical energy are a valuable objective in ongoing research. However, reactive oxygen species (ROS) that accompany nanoparticle production under light radiation severely affect the efficiency of biohybrid systems. In this study, we successfully constructed a two-hybrid system, Shewanella oneidensis-CdS and S. oneidensis-CdS@Fe3 O4 , in a simple, economical, and gentle manner. With the Fe3 O4 coating, ROS were considerably eliminated; the hydroxyl radical, superoxide radical, and hydrogen peroxide contents were reduced by 66.7%, 65.4%, and 72%, respectively, during light-driven S. oneidensis-CdS hydrogen production. S. oneidensis-CdS@Fe3 O4 showed a 2.6-fold higher hydrogen production (70 h) than S. oneidensis-CdS. Moreover, the S. oneidensis-CdS system produced an additional 367.8 μmol g-dcw-1 (70 h) of hydrogen compared with S. oneidensis during irradiation. The apparent quantum efficiencies of S. oneidensis-CdS and S. oneidensis-CdS@Fe3 O4 were 6.2% and 11.5%, respectively, exceeding values previously reported. In conclusion, a stable nanozyme coating effectively inhibited the cytotoxicity of CdS nanoparticles, providing an excellent production environment for bacteria. This study provides a rational strategy for protecting biohybrid systems from ROS toxicity and contributes to more efficient solar energy conversion in the future.

Ultrasound-Induced Abiotic and Biotic Interfacial Electron Transfer for Efficient Treatment of Bacterial Infection

Electron transfer plays an important role in various catalytic reactions and physiological activities, whose altered processes may change catalytic efficiency and interfere in physiological metabolic processes. In this study, we design an ultrasound (US)-activated piezoelectric responsive heterojunction (PCN-222-BTO, PCN: porous coordination network), which can change the electron transfer path at the abiotic and abiotic-biotic interfaces under US, thus achieving a rapid (15 min) and efficient bactericidal effect of 99.96%. US-induced polarization of BTO generates a built-in electric field, which promotes the electron transfer excited from PCN-222 to BTO at the PCN-222-BTO interface, thereby increasing the level of reactive oxygen species (ROS) production. Especially, we find that the biological electron transfer from the bacterial membrane to BTO is also activated at the MRSA-BTO interface. This antibacterial mode results in the down-regulated ribosomal, DNA and ATP synthesis related genes in MRSA, while the cell membrane and ion transport related genes are up-regulated due to the synergistic damage effect of ROS and disturbance of the bacterial electron transport chain. This US responsive dual-interface system shows an excellent therapeutic effect for the treatment of the MRSA-infected osteomyelitis model, which is superior to clinical vancomycin therapy.

Self-Powered Biohybrid Systems Based on Organic Materials for Sustainable Biosynthesis

Sustainable energy conversion and effective biosynthesis for value-added chemicals have attracted considerable attention, but most biosynthesis systems cannot work independently without external power. In this work, a self-powered biohybrid system based on organic materials is designed and constructed successfully by integrating electroactive microorganisms with electrochemical devices. Among them, the hybrid living materials based on S. oneidensis/poly[3-(3'-N,N,N-triethylamino-1'-propyloxy)-4-methyl-2,5-thiophene chloride] (PMNT) biofilms for microbial fuel cells played a crucial role in electrocatalytic biocurrent generation by using biowaste as the only energy source. Without any external power supplies, the self-powered biohybrid systems could generate, convert, and store electrical energy for effective photosynthetic regulation and sustained chemical production. This work provides a new strategy to combine comprehensive renewable energy production with chemical manufacturing without an external power source in the future.

Extracellular self-photosensitizer combined with metal oxide-based nano bio-hybrid system encapsulated by alginate improves hydrogen production in the presence of oxygen

The photocatalytic nano-biohybrid systems have great potential for the conversion of solar energy to fermentative hydrogen production. Herein, a whole-cell nano-biohybrid system consisting of biosynthesized cadmium sulfide, Enterobacter aerogenes cells, and metal oxide nanoparticles was constructed. The system was encapsulated with sodium alginate and used for light-driven biohydrogen production under anaerobic and in the presence of oxygen conditions. After 48 h incubation in the presence of oxygen, the E. aerogenes cells with the encapsulated hybrid system yielded 2.7 mmol H2/mmol glucose, a 13.5-fold higher than that of the E. aerogenes cells without encapsulation. The encapsulated hybrid system could produce hydrogen for up to 96 h and could produce hydrogen even under natural sunlight conditions. These results revealed that efficient hydrogen production is possible in the presence of oxygen. Overall, the present study demonstrated the potential of using proper nano-biohybrid system with encapsulation for the production of hydrogen under ambient air condition.

Making the connections: physical and electric interactions in biohybrid photosynthetic systems

Biohybrid photosynthesis systems, which combine biological and non-biological materials, have attracted recent interest in solar-to-chemical energy conversion. However, the solar efficiencies of such systems remain low, despite advances in both artificial photosynthesis and synthetic biology. Here we discuss the potential of conjugated organic materials as photosensitisers for biological hybrid systems compared to traditional inorganic semiconductors. Organic materials offer the ability to tune both photophysical properties and the specific physicochemical interactions between the photosensitiser and biological cells, thus improving stability and charge transfer. We highlight the state-of-the-art and opportunities for new approaches in designing new biohybrid systems. This perspective also summarises the current understanding of the underlying electron transport process and highlights the research areas that need to be pursued to underpin the development of hybrid photosynthesis systems.

Enhanced photocatalytic CO2 reduction on biomineralized CdS via an electron conduit in bacteria

There is an increasing trend in semi-artificial photosynthesis systems that combine living cells with inorganic semiconductors to activate a bacterial catalytic network. However, these systems face various challenges, including electron-hole recombination, photocorrosion, and the generation of photoexcited radicals by semiconductors, all of which impair the efficiency, stability, and sustainability of biohybrids. We first focus on a reverse strategy to improve highly efficient CO₂ photoreduction on biosynthesized inorganic semiconductors using an electron conduit in the electroactive bacterium S. oneidensis MR-1. Due to the suppressed charge recombination and photocorrosion on CdS, the maximum photocatalytic production rate of formate in water was 2650 μmol g^-1 h^-1 (with a selectivity of ca.100%), which ranks high among all photocatalysts and is the highest for inorganic-biological hybrid systems in an all-inorganic aqueous environment. The reverse enhancement effect of electrogenic bacteria on photocatalysis on semiconductors inspires new insight to develop a new generation of bio-semiconductor catalysts for solar chemical production.

Direct Visualization and Restoration of Metallic Ion-Induced Subcellular Ultrastructural Remodeling

Analysis of cellular ultrastructure dynamics and metal ions' fate can provide insights into the interaction between living organisms and metal ions. Here, we directly visualize the distribution of biogenic metallic aggregates, ion-induced subcellular reorganization, and the corresponding regulation effect in yeast by the near-native 3D imaging approach, cryo-soft X-ray tomography (cryo-SXT). By comparative 3D morphometric assessment, we observe the gold ions disrupting cellular organelle homeostasis, resulting in noticeable distortion and folding of vacuoles, apparent fragmentation of mitochondria, extreme swelling of lipid droplets, and formation of vesicles. The reconstructed 3D architecture of treated yeast demonstrates ∼65% of Au-rich sites in the periplasm, a comprehensive quantitative assessment unobtained by TEM. We also observe some AuNPs in rarely identified subcellular sites, namely, mitochondria and vesicles. Interestingly, the amount of gold deposition is positively correlated with the volume of lipid droplets. Shifting the external starting pH to near-neutral results in the reversion of changes in organelle architectures, boosting the amount of biogenic Au nanoparticles, and increasing cell viability. This study provides a strategy to analyze the metal ions-living organism interaction from subcellular architecture and spatial localization perspectives.

Effect and mechanism of simultaneous cadmium-tetracycline removal by a self-assembled microbial-photocatalytic coupling system

Electrochemical bacteria Shewanella oneidensis MR-4 (MR-4) was used to biologically generate cadmium sulfide (bio-CdS) nanocrystals and construct a self-assembled intimately coupled photocatalysis-biodegradation system (SA-ICPB) to remove cadmium (Cd) and tetracycline hydrochloride (TCH) from wastewater. The characterization using EDS, TEM, XRD, XPS, and UV-vis confirmed the successful CdS bio-synthesis and its visible-light response capacity (520 nm). 98.4% of Cd²⁺ (2 mM) was removed during bio-CdS generation within 30 min. The electrochemical analysis confirmed the photoelectric response capability of the bio-CdS as well as its photocatalytic efficiency. Under visible light, SA-ICPB entirely eliminated TCH (30 mg/L). In 2 h, 87.2% and 43.0% of TCH were removed separately with and without oxygen. 55.7% more chemical oxygen demand (COD) was removed with oxygen participation, indicating the degradation intermediates elimination by SA-ICPB required oxygen participation. Biodegradation dominated the process under aerobic circumstances. Electron paramagnetic resonance analysis indicated that h⁺ and ·O₂^- played a decisive role in photocatalytic degradation. Mass spectrometry analysis proved that TCH was dehydrated, dealkylated, and ring-opened before mineralizing. In conclusion, MR-4 can spontaneously generate SA-ICPB and rapidly-deeply eliminate antibiotics by coupling photocatalytic and microbial degradation. Such an approach was efficient for the deep degradation of persistent organic pollutants with antimicrobial properties.

Heavy-metal resistant bio-hybrid with biogenic ferrous sulfide nanoparticles: pH-regulated self-assembly and wastewater treatment application

Self-assembled bio-hybrids with biogenic ferrous sulfide nanoparticles (bio-FeS) on the cell surface are attractive for reduction of toxic heavy metals due to higher activity than bare bacteria, but they still suffer from slow synthesis and regeneration of bio-FeS and bacterial activity decay for removal of high-concentration heavy metals. A further optimization of the bio-FeS synthesis process and properties is of vital importance to address this challenge. Herein, we present a simple pH-regulation strategy to enhance bio-FeS synthesis and elucidated the underlying regulatory mechanisms. Slightly raising the pH from 7.4 to 8.3 led to 1.5-fold higher sulfide generation rate due to upregulated expression of thiosulfate reduction-related genes, and triggered the formation of fine-sized bio-FeS (29.4 ± 6.1 nm). The resulting bio-hybrid exhibited significantly improved extracellular reduction activity and was successfully used for treatment of high-concentration chromium -containing wastewater (Cr(VI), 80 mg/L) at satisfactory efficiency and stability. Its feasibility for bio-augmented treatment of real Cr(VI)-rich electroplating wastewater was also demonstrated, showing no obvious activity decline during 7-day operation. Overall, our work provides new insights into the environmental-responses of bio-hybrid self-assembly process, and may have important implications for optimized application of bio-hybrid for wastewater treatment and environmental remediation.

Engineered Living Materials For Sustainability

Recent advances in synthetic biology and materials science have given rise to a new form of materials, namely engineered living materials (ELMs), which are composed of living matter or cell communities embedded in self-regenerating matrices of their own or artificial scaffolds. Like natural materials such as bone, wood, and skin, ELMs, which possess the functional capabilities of living organisms, can grow, self-organize, and self-repair when needed. They also spontaneously perform programmed biological functions upon sensing external cues. Currently, ELMs show promise for green energy production, bioremediation, disease treatment, and fabricating advanced smart materials. This review first introduces the dynamic features of natural living systems and their potential for developing novel materials. We then summarize the recent research progress on living materials and emerging design strategies from both synthetic biology and materials science perspectives. Finally, we discuss the positive impacts of living materials on promoting sustainability and key future research directions.

Photodriven Chemical Synthesis by Whole-Cell-Based Biohybrid Systems: From System Construction to Mechanism Study

By simulating natural photosynthesis, the desirable high-value chemical products and clean fuels can be sustainably generated with solar energy. Whole-cell-based photosensitized biohybrid system, which innovatively couples the excellent light-harvesting capacity of semiconductor materials with the efficient catalytic ability of intracellular biocatalysts, is an appealing interdisciplinary creature to realize photodriven chemical synthesis. In this review, we summarize the constructed whole-cell-based biohybrid systems in different application fields, including carbon dioxide fixation, nitrogen fixation, hydrogen production, and other chemical synthesis. Moreover, we elaborate the charge transfer mechanism studies of representative biohybrids, which can help to deepen the current understanding of the synergistic process between photosensitizers and microorganisms, and provide schemes for building novel biohybrids with less electron transfer resistance, advanced productive efficiency, and functional diversity. Further exploration in this field has the prospect of making a breakthrough on the biotic-abiotic interface that will provide opportunities for multidisciplinary research.

A Semiconductor Biohybrid System for Photo-Synergetic Enhancement of Biological Hydrogen Production

CdS nanoparticles were introduced on E. coli cells to construct a hydrogen generating biohybrid system via the biointerface of tannic acid-Fe complex. This hybrid system promotes good biological activity in a high salinity environment. Under light illumination, the as-synthesized biohybrid system achieves a 32.44 % enhancement of hydrogen production in seawater through a synergistic effect.