Programmed Polarizability Engineering in a Cyclen-Based Cubic Zr(IV) Metal-Organic Framework to Boost Xe/Kr Separation

Purification of Xe and SF6 through Adaptive Contractions in a Flexible Metal-Organic Framework

Overcoming the trade-off effects between adsorption capacity, adsorption selectivity, and adsorption enthalpy of an adsorbent is very important but remains a huge challenge. Here, we report a flexible metal-organic framework (FJI-H36); it can selectively adsorb Xe from Xe/Kr mixtures with high adsorption capacity but very low adsorption enthalpy. Structural analyses show that such excellent adsorption performances come from the adaptive contraction of the flexible framework; pore shrinkage can enhance the interactions between adsorbed Xe and the framework and offset some of the adsorption heats. For SF6/N2 mixtures, FJI-H36 can also enhance the adsorption performance of SF6 through adaptive contraction, resulting in both high adsorption selectivity and low adsorption enthalpy. This not only provides a new adsorbent for the purification of Xe/Kr/SF6 but also offers a potential solution to overcome the trade-offs among adsorption capacity, adsorption selectivity, and adsorption enthalpy of a specific adsorbent.

Solvent-mediated subcomponent self-assembly of covalent metallacycles for hierarchical porous materials synthesis

We report a solvent-mediated subcomponent self-assembly strategy for synthesizing tetranuclear and triangular covalent metallacycles. The results demonstrate that the polarity of solvent significantly influences the structural outcome of metallacycles, and the square-shaped metallacycles can serve as building blocks for the construction of hierarchical porous materials such as metallacycle-based hydrogen-bonded organic frameworks (mHOFs) and metal-organic frameworks (mMOFs).

Ionic porous materials: from synthetic strategies to applications in gas separation and catalysis

Ionic porous materials possess a unique combination of tunable pore sizes and task-specific interactions between guest molecules and the charged frameworks, which endow them with versatility across diverse domains in chemistry and materials science. Significant advancements in their applications for gas separation and catalysis have been achieved in recent years due to the incorporation of ionic functionalities and ultra-microporous structures that enable molecular-scale recognition of guest molecules. This review summarizes recent advancements in the synthetic strategies of ionic porous materials, establishing design guidelines for the incorporation of ionic moieties into the backbone to fine-tune pore sizes and chemistry. It highlights the synergistic interplay of task-specific interactions with custom-designed pore structures in key applications, including adsorption separation, membrane separation, and gas conversion. Additionally, it examines structure-property relationships, offering deeper insights into enhancing performance. The report also addresses the current challenges in the practical application of these materials. Finally, the review provides future perspectives on ionic porous materials from both scientific and industrial viewpoints. Overall, this review aims to provide insights into pore structure and chemistry, supporting the precise placement of ionic functionalities.

Manipulating Hydrogen-Bonding Donor/Acceptor in Ultra-Robust Isoreticular Zr(IV) Metal-Organic Frameworks for Efficient Regulation of Water Sorption Inflection Point and Steepness

The development of porous materials exhibiting steep and stepwise adsorption of water vapor at desired humidity is crucial for implementing diverse applications such as humidity control, heat allocation, and atmospheric water harvesting. The precise molecular-level elucidation of structural characteristics and chemical components that dictate the water sorption behaviors in confined nanospaces, metal-organic frameworks (MOFs) in particular, is fundamentally important, but this has yet to be largely explored. In this work, by leveraging the isoreticular principle, we crafted two pairs of isostructural Zr-MOFs with linker backbones of benzene and pyrazine acting as hydrogen-bonding donor and acceptor, respectively. The outstanding water sorption cyclic durability of the four Zr-MOFs permits persuasive investigation of the correlation of the water sorption inflection point and steepness (the two central figures-of-merit for water sorption) with the linker functionality. The two pyrazine-carrying Zr-MOFs both show steep water uptake at lower relative pressure and slightly decreased steepness, which are quantitatively described by the Dubinin-Astakhov relation. We deciphered the privileged water clusters through single-crystal X-ray diffraction studies in which the pyrazine moiety formed stronger hydrogen-bonding interactions with guest water molecules and favored the formation of water pentamers instead of hexamers that are observed in the benzene analog. The hydrogen-bonding donor/acceptor manipulation approach presented in this work may facilitate future research endeavors focusing on molecular attribute engineering in predeterminedly ultrawater-resistant MOF platforms for efficient regulation of water sorption behaviors toward customized applications.

2D Nitrogen-Doped Graphene Materials for Noble Gas Separation

Noble gases, notably xenon, play a pivotal role in diverse high-tech applications. However, manufacturing xenon is an inherently challenging task, due to its unique properties and trace abundance in the Earth's atmosphere. Consequently, there is a pressing need for the development of efficient methods for the separation of noble gases. Using mild fluorographene chemistry, nitrogen-doped graphene (GNs) materials are synthesized with abundant aromatic regions and extensive nitrogen doping within the vacancies and holes of the aromatic lattice. Due to the organized interlayer "nanochannels", nitrogen functional groups, and defects within the two-dimensional (2D) structures, GNs exhibits effective selectivity for Xe over Kr at low pressure. This enhanced selectivity is attributed to the stronger binding affinity of Xe to GN compared to Kr. The adsorption is governed by London dispersion forces, as revealed by theoretical calculations using symmetry-adapted perturbation theory (SAPT). Investigation of other GNs differing in nitrogen content, surface area, and pore sizes underscores the significance of nitrogen functional groups, defects, and interlayer nanochannels over the surface area in achieving superior selectivity. This work offers a new perspective on the design and fabrication of functionalized graphene derivatives, exhibiting superior noble gas storage and separation activity exploitable in gas production technologies.

Shifting C2H2/CO2 Adsorption and Separation in Pillar-Layered Metal-Organic Frameworks Finely-Regulated by Molecular Rotation

The efficient separation of C₂H₂/CO₂ mixture is crucial for industrial applications.  A promising strategy is proposed herein to fine-tune the C₂H₂/CO2 adsorption and separation by pillar-layered metal-organic framework (MOF) adsorbents via molecular rotation. Keeping the same ultramicroporous architecture, three Zn-X-TRZ (TRZ = 1,2,4-triazole) adsorbents are prepared with X-pillar rotors varying from 9,10-anthracenedicarboxylic acid (ADC), 1,4-naphthalenedicarboxylic acid (NDC) to 1,4-benzenedicarboxylic acid (BDC). Remarkably, the introduction of the largest ADC rotors enables Zn-ADC-TRZ with superior C₂H₂-selective thermodynamic-separation ability (highest heat of adsorption and IAST selectivity values) but poor dynamic-separation performance caused by steric hindrance. Conversely, Zn-BDC-TRZ with the smallest rotors exhibit moderate CO₂-selective thermodynamic-separation ability, but excellent CO2/C₂H₂ dynamic-separation ability with high-purity C₂H₂ produced at 298 K (>99.5% obtained from 70% C₂H₂ mixture and >99.95% from 90% C₂H₂ mixture). In contrast, Zn-NDC-TRZ with medium NDC rotors shows comparable interactions and steric hindrance with C₂H₂ and CO₂, making both the thermodynamic and dynamic C₂H₂/CO₂ separation are unfavorable. Overall, controllable adsorption of C₂H₂ and CO2 is successfully achieved and shifted from C2H2-selective to CO₂-selective separation regulated by the pillared molecular rotation within pillar-layered MOFs, providing a useful route for practical gas adsorbent exploration.

Integration of ordered porous materials for targeted three-component gas separation

Separation of multi-component mixtures in an energy-efficient manner has important practical impact in chemical industry but is highly challenging. Especially, targeted simultaneous removal of multiple impurities to purify the desired product in one-step separation process is an extremely difficult task. We introduced a pore integration strategy of modularizing ordered pore structures with specific functions for on-demand assembly to deal with complex multi-component separation systems, which are unattainable by each individual pore. As a proof of concept, two ultramicroporous nanocrystals (one for C2H2-selective and the other for CO2-selective) as the shell pores were respectively grown on a C2H6-selective ordered porous material as the core pore. Both of the respective pore-integrated materials show excellent one-step ethylene production performance in dynamic breakthrough separation experiments of C2H2/C2H4/C2H6 and CO2/C2H4/C2H6 gas mixture, and even better than that from traditional tandem-packing processes originated from the optimized mass/heat transfer. Thermodynamic and dynamic simulation results explained that the pre-designed pore modules can perform specific target functions independently in the pore-integrated materials.

Ultramicroporous Metal-Organic Framework Featuring Multiple Polar Sites for Efficient Xenon Capture and Xe/Kr Separation

Efficient adsorption separation of xenon/krypton (Xe/Kr) mixtures is an important technological challenge due to their similar sizes and shapes. Herein, we report an ultramicroporous metal-organic framework (MOF), ZJU-Bao-302a, with pore sizes close to the kinetic diameter of Xe and pore surfaces lined with a high density of polar sites, including methyl groups, amines, and uncoordinated oxygen atoms. The synergistic effect of these polar sites enables ZJU-Bao-302a to exhibit a high Xe uptake of 2.77 mmol g-1 and a balanced Xe/Kr selectivity of 14.6 under ambient conditions. Dynamic breakthrough experiments demonstrate the material's capability to efficiently separate Xe/Kr mixtures (20/80) as well as capture Xe at ultralow concentrations (400 ppmv) from nuclear reprocessing exhausts, achieving a superior dynamic Xe capacity of 24.2 mmol kg-1. Density functional theory calculations reveal that the localized polar groups/atoms in ZJU-Bao-302a provide more effective recognition sites for Xe than Kr, enhancing the thermodynamic selectivity. This study highlights the importance of integrating tailored pore sizes and dense polar sites in metal-organic frameworks for developing high-performance Xe/Kr separation adsorbents.

Pore Chemistry and Architecture Control in Anionic Functional Ultramicroporous Materials for Record Dense Packing of Xenon

Adsorptive separation of Xe and Kr is an industrially promising but challenging process because of their identical shape and similar physicochemical properties. Herein, we demonstrate a strategy through rationally designing the linkers of anionic functional ultramicroporous materials (FUMs) to finely regulate the pore chemistry and architecture, which creates unique stepped channels incorporating dense polar nanotraps to generate a larger effective pore space and enables dense packing of Xe. A new hydrolytically stable FUM (ZUL-530) was prepared, which for the first time achieves a Xe packing density exceeding the liquid Xe density at atmospheric conditions in metal-organic frameworks (MOFs) (based on experimental data), resulting in both excellent Xe uptake (2.55 mmol g-1 at 0.2 bar) and high IAST selectivity (20.5). GCMC and DFT-D calculations reveal the essential role of the stepped traps in the dense packing of Xe. Breakthrough experiments demonstrate remarkable productivities of both high-purity Kr (6.70 mmol g-1) and Xe (1.78 mmol g-1) for the Xe/Kr (20:80) mixture. In a model nuclear industry exhaust gas, ZUL-530 exhibits a top-class Xe dynamic capacity (28.8 mmol kg-1) for trace Xe, which proves it is one of the best candidates for Xe/Kr separation.

A combined solid state, solution and DFT study of a dimethyl-cyclen-Pd(II) complex

A new palladium(II) complex containing the previously synthesized 4,10-bis[(3-hydroxy-4-pyron-2-yl)methyl]-1,7-dimethyl-1,4,7,10-tetraazacyclododecane ligand maltonis was prepared and characterized both in solution and in the solid state. Hirshfeld surface and energy framework analyses were also performed. Because maltonis already showed antineoplastic activity, the complexation of Pd(II), chosen as an alternative to Pt(II), was investigated to study its possible biological activity. UV-vis and NMR studies confirmed the formation and stability of the complex in aqueous solution at physiological pH. X-ray diffraction data revealed a structure where the Pd(II) ion is lodged in the dimethyl-cyclen cavity, with maltol rings facing each other (closed shape) even if they are not involved in the coordination. DFT analysis was performed in order to understand the most stable shape of the complex. In view of evaluating its possible bioactive conformation, the DFT study suggested a slight energetic preference for the closed one. The resulting closed complex was stabilized in the X-ray structure by intermolecular interactions that replace the intramolecular interactions present in the optimized complex. According to the DFT calculated formation energies, notwithstanding its rarity, the Pd(II) complex of maltonis is the thermodynamically preferred one among analogous complexes containing different metal ions (Pt(II), Co(II), and Cu(II)). Finally, to study its possible biological activity, the interaction between the Pd(II) complex of maltonis and nucleosides was evaluated through NMR and DFT calculations, revealing a possible interaction with purines via the maltol moieties.

Tunable Gas Admission via a "Molecular Trapdoor" Mechanism in a Flexible Cationic Metal-Organic Framework Featuring 1D Channels

Achieving high gas selectivity is challenging when dealing with gas pairs of similar size and physiochemical properties. The "molecular trapdoor" mechanism discovered in zeolites holds promise for highly selective gas adsorption separation but faces limitations like constrained pore volume and slow adsorption kinetics. To address these challenges, for the first time, a flexible metal-organic framework (MOF) featuring 1D channels and functioning as a "molecular trapdoor" material is intoduced. Extra-framework anions act as "gate-keeping" groups at the narrowest points of channels, permitting gas admissions via gate opening induced by thermal/pressure stimuli and guest interactions. Different guest molecules induce varied energy barriers for anion movement, enabling gas separation based on distinct threshold temperatures for gas admission. The flexible framework of Pytpy MOFs, featuring swelling structure with rotatable pyridine rings, facilitates faster gas adsorption than zeolite. Analyzing anion properties of Pytpy MOFs reveals a guiding principle for selecting anions to tailor threshold gas admission. This study not only overcomes the kinetic limitations related to gas admission in the "molecular trapdoor" zeolites but also underscores the potential of developing MOFs as molecular trapdoor adsorbents, providing valuable insights for designing ionic MOFs tailored to diverse gas separation applications.

Defect-enabling zirconium-based metal-organic frameworks for energy and environmental remediation applications

This comprehensive review explores the diverse applications of defective zirconium-based metal-organic frameworks (Zr-MOFs) in energy and environmental remediation. Zr-MOFs have gained significant attention due to their unique properties, and deliberate introduction of defects further enhances their functionality. The review encompasses several areas where defective Zr-MOFs exhibit promise, including environmental remediation, detoxification of chemical warfare agents, photocatalytic energy conversions, and electrochemical applications. Defects play a pivotal role by creating open sites within the framework, facilitating effective adsorption and remediation of pollutants. They also contribute to the catalytic activity of Zr-MOFs, enabling efficient energy conversion processes such as hydrogen production and CO2 reduction. The review underscores the importance of defect manipulation, including control over their distribution and type, to optimize the performance of Zr-MOFs. Through tailored defect engineering and precise selection of functional groups, researchers can enhance the selectivity and efficiency of Zr-MOFs for specific applications. Additionally, pore size manipulation influences the adsorption capacity and transport properties of Zr-MOFs, further expanding their potential in environmental remediation and energy conversion. Defective Zr-MOFs exhibit remarkable stability and synthetic versatility, making them suitable for diverse environmental conditions and allowing for the introduction of missing linkers, cluster defects, or post-synthetic modifications to precisely tailor their properties. Overall, this review highlights the promising prospects of defective Zr-MOFs in addressing energy and environmental challenges, positioning them as versatile tools for sustainable solutions and paving the way for advancements in various sectors toward a cleaner and more sustainable future.

Water-Resistant, Scalable, and Inexpensive Chiral Metal-Organic Framework Featuring Global Negative Electrostatic Potentials for Efficient Acetylene Separation

Physical separation of acetylene (C2H2) from carbon dioxide (CO2) or ethylene (C2H4) on metal-organic frameworks (MOFs) is crucial for achieving high-purity feed gases with minimal energy penalty. However, such processes are exceptionally challenging due to their close physical properties and are also critically restricted by the high cost of large-scale MOF synthesis. Here, we demonstrate the readily scalable synthesis of a highly water-resistant chiral Cu-MOF (TAMOF-1) based on an inexpensive proteogenic amino acid derivative bearing rich N/O sites. Notably, the unique coordination in this ultramicroporous MOF has resulted in the generation of rare global negative electrostatic potentials, which greatly facilitate the electrostatic interactions with C2H2 molecules, thus leading to their efficient separation from C2H2/CO2 and C2H2/C2H4 mixtures under ambient conditions. The separation efficiency and mechanism are unequivocally validated by breakthrough experiments and computational simulations. This work not only highlights the pivotal role of creating a negative electro-environment in confined spaces for boosting C2H2 capture and separation but also opens up new ways of employing cheap amino acid derivatives bearing rich electro-negative N and O sites as organic linkers to constructing high-performing MOF materials for gas separation purposes.

Metal-Organic Frameworks Possessing Suitable Pores for Xe/Kr Separation

Adsorption separation of the Xe/Kr mixture remains a tough issue since Xe and Kr have an inert nature and similar sizes. Here we present a chlorinated metal-organic framework (MOF) [JXNU-19(Cl)] and its nonchlorinated analogue (JXNU-19) for Xe/Kr separation. The two isostructural MOFs constructed from the heptanuclear cobalt-hydroxyl clusters bridged by organic ligands are three-dimensional structures. Detailed contrast of the Xe/Kr adsorption separation properties of the MOF shows that significantly enhanced Xe uptakes and Xe/Kr adsorption selectivity (17.1) are observed for JXNU-19 as compared to JXNU-19(Cl). The main binding sites for Xe in the MOF revealed by computational simulations are far away from the chlorine sites, suggesting that the introduction of the chlorine groups results in the unfavorable Xe adsorption for JXNU-19(Cl). The optimal pores, high surface area, and multiple strong Xe-framework interactions facilitate the effective Xe/Kr separation for JXNU-19.

Dispersive hierarchically porous composites based on defective MOFs as mixed-mode stationary phases for chromatographic separation

Defective metal-organic frameworks-based composites with excellent separation properties were obtained. The mesoporous metal-organic frameworks were selected and deliberately designed to be deficient, and they were then combined with polyacrylamide to be modified on the surface of silica microspheres. The prepared composites were employed as mixed-mode stationary phase in chromatographic separation, and they were compared to both conventional microporous metal-organic framework-based columns and commercial columns. It showed improved selectivity and retention toward both hydrophilic and hydrophobic analytes, allowing for the effective separation of nine nucleosides and nucleobases, eight alkaloids, six antibiotics, and five alkylbenzenes. Additionally, the column was used to effectively separate the active ingredients in the daring substance of honeysuckle, revealing a wide range of possible applications. For the same batch of analytes, three batches of distinct materials demonstrated consistent separation effects. It also demonstrated excellent chromatographic repeatability and stability, with relative standard deviations of the retention time and/or column efficiency being found to be less than 0.8% and 0.9%, respectively. The dispersive hierarchically porous composites were demonstrated to be effective in chromatographic separation, and the results expanded the potential uses of defective MOFs with dispersed multi-level pores.

One Scalable and Stable Metal-Organic Framework for Efficient Separation of CH4/N2 Mixture

Separating CH4 from coal bed methane is of great importance but challenging. Adsorption-based separation often suffers from low selectivity, poor stability, and difficulty to scale up. Herein, a stable and scalable metal-organic framework [MOF, CoNi(pyz-NH2)] with multiple CH4 binding sites was reported to efficiently separate the CH4/N2 mixture. Due to its suitable pore size and multiple CH4 binding sites, it exhibits excellent CH4/N2 selectivity (16.5) and CH4 uptake (35.9 cm3/g) at 273 K and 1 bar, which is comparable to that of the state-of-the-art MOFs. Theoretical calculations reveal that the high density of open metal sites and polar functional groups in the pores provide strong affinity to CH4 than to N2. Moreover, CoNi(pyz-NH2) displays excellent structural stability and can be scale-up synthesized (22.7 g). This work not only provides an excellent adsorbent but also provides important inspiration for the future design and preparation of porous adsorbents for separations.

Water-stable metal-organic frameworks (MOFs): rational construction and carbon dioxide capture

Metal-organic frameworks (MOFs) are considered to be a promising porous material due to their excellent porosity and chemical tailorability. However, due to the relatively weak strength of coordination bonds, the stability (e.g., water stability) of MOFs is usually poor, which severely inhibits their practical applications. To prepare water-stable MOFs, several important strategies such as increasing the bonding strength of building units and introducing hydrophobic units have been proposed, and many MOFs with excellent water stability have been prepared. Carbon dioxide not only causes a range of climate and health problems but also is a by-product of some important chemicals (e.g., natural gas). Due to their excellent adsorption performances, MOFs are considered as a promising adsorbent that can capture carbon dioxide efficiently and energetically, and many water-stable MOFs have been used to capture carbon dioxide in various scenarios, including flue gas decarbonization, direct air capture, and purified crude natural gas. In this review, we first introduce the design and synthesis of water-stable MOFs and then describe their applications in carbon dioxide capture, and finally provide some personal comments on the challenges facing these areas.

Hydrogen-Bonding Assembly Meets Anion Coordination Chemistry: Framework Shaping and Polarity Tuning for Xenon/Krypton Separation

Hybrid hydrogen-bonded (H-bonded) frameworks built from charged components or metallotectons offer diverse guest-framework interactions for target-specific separations. We present here a study to systematically explore the coordination chemistry of monovalent halide anions, i.e., F- , Cl- , Br- , and I- , with the aim to develop hybrid H-bond synthons that enable the controllable construction of microporous H-bonded frameworks exhibiting fine-tunable surface polarity within the adaptive cavities for realistic xenon/krypton (Xe/Kr) separation. The spherical halide anions, especially Cl- , Br- , and I- , are found to readily participate in the charge-assisted H-bonding assembly with well-defined coordination behaviors, resulting in robust frameworks bearing open halide anions within the distinctive 1D pore channels. The activated frameworks show preferential binding towards Xe (IAST Xe/Kr selectivity ca. 10.5) because of the enhanced polarizability and the pore confinement effect. Specifically, dynamic column Xe/Kr separation with a record-high separation factor (SF=7.0) among H-bonded frameworks was achieved, facilitating an efficient Xe/Kr separation in dilute, CO2 -containing gas streams exactly mimicking the off-gas of spent nuclear fuel (SNF) reprocessing.

Modulator-Dependent Dynamics Synergistically Enabled Record SO2 Uptake in Zr(IV) Metal-Organic Frameworks Based on Pyrene-Cored Molecular Quadripod Ligand

Developing innovative porous solid sorbents for the capture and storage of toxic SO2 is crucial for energy-efficient transportation and subsequent processing. Nonetheless, the quest for high-performance SO2 sorbents, characterized by exceptional uptake capacity, minimal regeneration energy requirements, and outstanding recyclability under ambient conditions, remains a significant challenge. In this study, we present the design of a unique tertiary amine-embedded, pyrene-based quadripod-shaped ligand. This ligand is then assembled into a highly porous Zr-metal-organic framework (MOF) denoted as Zr-TPA, which exhibits a newly discovered 3,4,8-c woy net structure. Remarkably, our Zr-TPA MOF achieved an unprecedented SO2 sorption capacity of 22.7 mmol g-1 at 298 K and 1 bar, surpassing those of all previously reported solid sorbents. We elucidated the distinct SO2 sorption behaviors observed in isostructural Zr-TPA variants synthesized with different capping modulators (formate, acetate, benzoate, and trifluoroacetate, abbreviated as FA, HAc, BA, and TFA, respectively) through computational analyses. These analyses revealed unexpected SO2-induced modulator-node dynamics, resulting in transient chemisorption that enhanced synergistic SO2 sorption. Additionally, we conducted a proof-of-concept experiment demonstrating that the captured SO2 in Zr-TPA-FA can be converted in situ into a valuable pharmaceutical intermediate known as aryl N-aminosulfonamide, with a high yield and excellent recyclability. This highlights the potential of robust Zr-MOFs for storing SO2 in catalytic applications. In summary, this work contributes significantly to the development of efficient SO2 solid sorbents and advances our understanding of the molecular mechanisms underlying SO2 sorption in Zr-MOF materials.

Prediction of Xe/Kr Separation in Metal-Organic Frameworks by a Precursor-Based Neural Network Synergistic with a Polarizable Adsorbate Model

Adsorption and separation of Xe/Kr are significant for making high-density nuclear energy environmentally friendly and for meeting the requirements of the gas industry. Enhancing the accuracy of the adsorbate model for describing the adsorption behaviors of Xe and Kr in MOFs and the efficiency of the model for predicting the separation potential (SP) value of Xe/Kr separation in MOFs helps in searching for promising MOFs for Xe/Kr adsorption and separation within a short time and at a low cost. In this work, polarizable and transferable models for mimic Xe and Kr adsorption behaviors in MOFs were constructed. Using these models, SP values of 38 MOFs at various temperatures and pressures were calculated. An optimal neural network model called BPNN-SP was designed to predict SP value based on physical parameters of metal center (electronegativity and radius) and organic linker (three-dimensional size and polarizability) combined with temperature and pressure. The regression coefficient value of the BPNN-SP model for each data set is higher than 0.995. MAE, MBE, and RMSE of BPNN-SP are only 0.331, -0.002, and 0.505 mmol/g, respectively. Finally, BPNN-SP was validated by experiment data from six MOFs. The transferable adsorbate model combined with the BPNN-SP model would highly improve the efficiency for designing MOFs with high performance for Xe/Kr adsorption and separation.

Photo-Responsive Carbon Capture over Metalloporphyrin-C60 Metal-Organic Frameworks via Charge-Transfer

Great efforts have been devoted to the study of photo-responsive adsorption, but its current methodology largely depends on the well-defined photochromic units and their photo-driven molecular deformation. Here, a methodology to fabricate nondeforming photo-responsive sorbents is successfully exploited. With C60-fullerene doping in metalloporphyrin metal-organic frameworks (PCN-M, M = Fe, Co, or Ni) and intensively interacting with the metalloporphyrin sites, effective charge-transfer can be achieved over the metalloporphyrin-C60 architectures once excited by the light at 350 to 780 nm. The electron density distribution and the resultant adsorption activity are thus changed by excited states, which are also stable enough to meet the timescale of microscopic adsorption equilibrium. The charge-transfer over Co(II)-porphyrin-C60 is proved to be more efficient than the Fe(II)- and Ni(II)-porphyrin-C60 sites, as well as than all the metalloporphyrin sites, so the CO2 adsorption capacity (CAC; at 0 °C and 1 bar) over the C60-doped PCN-Co can be largely improved from 2.05 mmol g-1 in the darkness to 2.69 mmol g-1 with light, increased by 31%, in contrast to photo-irresponsive CAC over all C60-undoped PCN-M sorbents and only the photo-loss CAC over C60.

Topological Design of Unprecedented Metal-Organic Frameworks Featuring Multiple Anion Functionalities and Hierarchical Porosity for Benchmark Acetylene Separation

Separation of acetylene (C2 H2 ) from carbon dioxide (CO2 ) or ethylene (C2 H4 ) is industrially important but still challenging so far. Herein, we developed two novel robust metal organic frameworks AlFSIX-Cu-TPBDA (ZNU-8) with znv topology and SIFSIX-Cu-TPBDA (ZNU-9) with wly topology for efficient capture of C2 H2 from CO2 and C2 H4 . Both ZNU-8 and ZNU-9 feature multiple anion functionalities and hierarchical porosity. Notably, ZNU-9 with more anionic binding sites and three distinct cages displays both an extremely large C2 H2 capacity (7.94 mmol/g) and a high C2 H2 /CO2 (10.3) or C2 H2 /C2 H4 (11.6) selectivity. The calculated capacity of C2 H2 per anion (4.94 mol/mol at 1 bar) is the highest among all the anion pillared metal organic frameworks. Theoretical calculation indicated that the strong cooperative hydrogen bonds exist between acetylene and the pillared SiF6 2- anions in the confined cavity, which is further confirmed by in situ IR spectra. The practical separation performance was explicitly demonstrated by dynamic breakthrough experiments with equimolar C2 H2 /CO2 mixtures and 1/99 C2 H2 /C2 H4 mixtures under various conditions with excellent recyclability and benchmark productivity of pure C2 H2 (5.13 mmol/g) or C2 H4 (48.57 mmol/g).

Rational design of stable functional metal-organic frameworks

Functional porous metal-organic frameworks (MOFs) have been explored for a number of potential applications in catalysis, chemical sensing, water capture, gas storage, and separation. MOFs are among the most promising candidates to address challenges facing our society related to energy and environment, but the successful implementation of functional porous MOF materials are contingent on their stability; therefore, the rational design of stable MOFs plays an important role towards the development of functional porous MOFs. In this Focus article, we summarize progress in the rational design and synthesis of stable MOFs with controllable pores and functionalities. The implementation of reticular chemistry allows for the rational top-down design of stable porous MOFs with targeted topological networks and pore structures from the pre-selected building blocks. We highlight the reticular synthesis and applications of stable MOFs: (1) MOFs based on high valent metal ions (e.g., Al3+, Cr3+, Fe3+, Ti4+ and Zr4+) and carboxylate ligands; (2) MOFs based on low valent metal ions (e.g., Ni2+, Cu2+, and Zn2+) and azolate linkers. We envision that the synthetic strategies, including modulated synthesis and post-synthetic modification, can potentially be extended to other more complex systems like metal-phosphonate framework materials.

Tetra-Nuclear Cluster-Based Lanthanide Metal-Organic Frameworks as White Phosphor, Information Encryption, Self-Calibrating Thermometers, and Fe2+ Sensors

The application of one kind of metal-organic framework (MOF) material used in multiple fields is one of the most interesting research topics. In this work, four new tetra-nuclear cluster-based lanthanide metal-organic frameworks (LnMOFs) [Ln₂(BTDB)₃(DMA)(phen)]_n (Ln = Tb TbMOF, Eu EuMOF, Gd GdMOF, Tb_1.830Eu_0.170 Tb,EuMOF, 3,5-bis(trifluoromethyl)-4',4″-dicarboxytriphenylamine = H₂BTDB, 1,10-phenanthroline = phen) are obtained based on the ligand of H₂BTDB that is synthesized in our laboratory, and the precise single-crystal structure of H₂BTDB is obtained for the first time. The white phosphor was obtained by facilely hybridizing two components of the orange-yellow emission phosphor of Tb,EuMOF and the blue luminescence material of triphenylamine according to the trichromatic theory. At the same time, TbMOF, EuMOF, Tb,EuMOF, and the white phosphor can be used for information encryption, demonstrating their potential application in the field of anti-counterfeiting. Tb,EuMOF is also a multi-mode and self-calibrating thermometer within a broad temperature range of 110-300 K. Further studies show that EuMOF is a rapid response sensor for Fe²⁺, with a very low limit of detection of 2.0 nM, which is much lower than the national standards for Fe²⁺ (GB 5749-2005, 5.357 μM). It can achieve strong anti-interference detection of Fe²⁺ in actual samples of tap water and lake water. In addition, EuMOF can also be made into an easy-to-use sensing device of test paper for real-time and visual sensing of Fe²⁺.

Reticular Chemistry in Pore Engineering of a Y-Based Metal-Organic Framework for Xenon/Krypton Separation

The fine-tuning of metal-organic framework (MOF) pore structures is of critical importance in developing energy-efficient xenon/krypton (Xe/Kr) separation techniques. Capitalizing on reticular chemistry, we constructed a robust Y-based MOF (NU-1801) that is isoreticular to NPF-500 with a shortened organic ligand and a larger metal radius while maintaining the 4,8-connected flu topology, giving rise to a narrowed pore structure for the efficient separation of a Xe/Kr mixture. At 298 K and 1 bar, NU-1801 possessed a moderate Xe uptake of 2.79 mmol/g but exhibited a high Xe/Kr selectivity of 8.2 and an exceptional Xe/Kr uptake ratio of about 400%. NU-1801 could efficiently separate a Xe/Kr mixture (20:80, v/v), as validated by breakthrough experiments, due to the outstanding discrimination in van der Waals interactions of Xe and Kr toward the framework confirmed by grand canonical Monte Carlo simulations. This work highlights the importance of reticular chemistry in designing structure-specific MOFs for gas separation.