Ionic Conductivity and Potential Application for Fuel Cell of a Modified Imine-Based Covalent Organic Framework

"All in One" Strategy for Achieving Superprotonic Conductivity by Incorporating Strong Acids into a Robust Imidazole-Linked Covalent Organic Framework

The fabrication of solid-state proton-conducting electrolytes possessing both high performance and long-life reusability is significant but challenging. An "all-in-one" composite, H3PO4@PyTFB-1-SO3H, including imidazole, sulfonic acid, and phosphoric acid, which are essential for proton conduction, was successfully prepared by chemical post-modification and physical loading in the rationally pre-synthesized imidazole-based nanoporous covalent organic framework (COF), PyTFB-1. The resultant H3PO4@PyTFB-1-SO3H exhibits superhigh proton conductivity with its value even highly up to 1.15 × 10-1 S cm-1 at 353 K and 98% relative humidity (RH), making it one of the highest COF-based composites reported so far under the same conditions. Experimental studies and theoretical calculations further confirmed that the imidazole and sulfonic acid groups have strong interactions with the H3PO4 molecules and the synergistic effect of these three groups dramatically improves the proton conductivity properties of H3PO4@PyTFB-1-SO3H. This work demonstrated that by aggregating multiple proton carriers into one composite, effective proton-conducting electrolyte can be feasibly achieved.

Covalent-Frameworked 2D Crown Ether with Chemical Multifunctionality

Here, we present the synthesis and characterization of a novel 2D crystalline framework, named C2O, which mainly consists of carbon and oxygen in a 2:1 molar ratio and features crown ether holes in its skeletal structure. The covalent-frameworked 2D crown ether can be synthesized on a gram-scale and exhibits fine chemical stability in various environments, including acid, base, and different organic solvents. The C2O efficiently activates KI through the strong coordination of K+ with crown ether holes in a rigid framework, which enhances the nucleophilicity of I- and significantly improves its catalytic activity for CO2 fixation with epoxides. The presence of C2O with KI results in remarkable increases in CO2 conversion from 5.7% to 99.9% and from 2.9% to 74.2% for epichlorohydrin and allyl glycidyl ether, respectively. Moreover, C2O possesses both electrophilic and nucleophilic sites at the edge of its framework, allowing for the customization of physicochemical properties by a diverse range of chemical modifications. Specifically, incorporating allyl glycidyl ether (AGE) as an electrophile or ethoxyethylamine (EEA) as a nucleophile into C2O enables the synthesis of C2O-AGE or C2O-EEA, respectively. These modified frameworks exhibit improved conversions of 97.2% and 99.9% for CO2 fixation with allyl glycidyl ether, outperforming unmodified C2O showing a conversion of 74.2%. This newly developed scalable, durable, and customizable covalent framework holds tremendous potential for the design and preparation of outstanding materials with versatile functionalities, rendering them highly attractive for a wide range of applications.

Membranes based on Covalent Organic Frameworks through Green and Scalable Interfacial Polymerization using Ionic Liquids for Antibiotic Desalination

Covalent organic framework (COF) membranes featuring uniform topological structures and devisable functions, show huge potential in water purification and molecular separation. Nevertheless, the inability of uniform COF membranes to be produced on an industrial scale and their nonenvironmentally friendly fabrication method are the bottleneck preventing their industrial applications. Herein, we report a new green and industrially adaptable scraping-assisted interfacial polymerization (SAIP) technique to fabricate scalable and uniform TpPa COF membranes. The process used non-toxic and low-volatility ionic liquids (ILs) as organic phase instead of conventional organic solvents for interfacial synthesis of TpPa COF layer on a support membrane, which can simultaneously achieve the purposes of (i) improving the greenness of membrane-forming process and (ii) fabricating a robust membrane that can function beyond the conventional membranes. This approach yields a large-area, continuous COF membrane (19×25 cm2 ) with a thickness of 78 nm within a brief period of 2 minutes. The resulting membrane exhibited an unprecedented combination of high permeance (48.09 L m-2 h-1 bar-1 ) and antibiotic desalination efficiency (e.g., NaCl/adriamycin separation factor of 41.8), which is superior to the commercial benchmarking membranes.

Enzyme-catalyzed electrochemical aptasensor for ultrasensitive detection of soluble PD-L1 in breast cancer based on decorated covalent organic frameworks and carbon nanotubes

BACKGROUND

Soluble programmed death-ligand 1 (sPD-L1) is critically involved in breast cancer recurrence and metastasis. However, the clinical application of highly sensitive sPD-L1 assays remains a challenge due to its low abundance in peripheral blood. To address this issue, for the first time, an enzyme-catalyzed electrochemical aptasensing platform was devised, incorporating covalent organic frameworks-gold nanoparticles-antibody-horseradish peroxidase (COFs-AuNPs-Ab-HRP) and polyethyleneimine-functionalized multiwalled carbon nanotubes (MWCNTs-PEI-AuNPs) for the highly specific and ultrasensitive detection of sPD-L1.

RESULTS

MWCNTs-PEI-AuNPs possessed an extensive specific surface area and exhibited excellent electrical conductivity, facilitating the immobilization of aptamer and amplifying the signal. COFs modified with AuNPs not only amplified the electrical signal but also proffered a loading platform for the Ab and HRP. The favorable biocompatibility of COFs contributed to the preservation of enzyme activity and stability. HRP acted in synergy with hydrogen peroxide (H2O2) to catalyze the oxidation of hydroquinone (HQ) to benzoquinone (BQ). Subsequently, BQ underwent electrochemical reduction to HQ, inducing an enzymatic redox cycle that amplified the electrochemical signal and enhanced the sensitivity and selectivity of the detection method. The developed aptasensor displayed a liner range for sPD-L1 identification from 1 pg mL-1 to 100 ng mL-1 and the detection limit reached 0.143 pg mL-1 (S/N = 3).

SIGNIFICANCE

Paving the way for clinical application, this strategy detected differences in sPD-L1 in cell supernatants and peripheral blood of breast cancer patients with higher sensitivity compared to commercial sPD-L1 ELISA kit. This work demonstrates significant potential in offering reference information for early diagnosis and disease surveillance of breast cancer.

Continuous Covalent Organic Frameworks Membranes: From Preparation Strategies to Applications

Covalent organic frameworks (COFs) are porous crystalline polymeric materials formed by the covalent bonding of organic units. The abundant organic units library gives the COFs species diversity, easily tuned pore channels, and pore sizes. In addition, the periodic arrangement of organic units endows COFs regular and highly connected pore channels, which has led to the rapid development of COFs in membrane separations. Continuous defect-free and high crystallinity of COF membranes is the key to their application in separations, which is the most important issue to be addressed in the research. This review article describes the linkage types of covalent bonds, synthesis methods, and pore size regulation strategies of COFs materials. Further, the preparation strategies of continuous COFs membranes are highlighted, including layer-by-layer (LBL) stacking, in situ growth, interfacial polymerization (IP), and solvent casting. The applications in separation fields of continuous COFs membranes are also discussed, including gas separation, water treatment, organic solvent nanofiltration, ion conduction, and energy battery membranes. Finally, the research results are summarized and the future prospect for the development of COFs membranes are outlined. More attention may be paid to the large-scale preparation of COFs membranes and the development of conductive COFs membranes in future research.

Recent advancements of covalent organic frameworks (COFs) as proton conductors under anhydrous conditions for fuel cell applications

Recent electrochemical energy conversion devices require more advanced proton conductors for their broad applications, especially, proton exchange membrane fuel cell (PEMFC) construction. Covalent organic frameworks (COFs) are an emerging class of organic porous crystalline materials that are composed of organic linkers and connected by strong covalent bonds. The unique characteristics including well-ordered and tailorable pore channels, permanent porosity, high degree of crystallinity, excellent chemical and thermal stability, enable COFs to be the potential proton conductors in fuel cell devices. Generally, proton conduction of COFs is dependent on the amount of water (extent of humidity). So, the constructed fuel cells accompanied complex water management system which requires large radiators and airflow for their operation at around 80 °C to avoid overheating and efficiency roll-off. To overcome such limitations, heavy-duty fuel cells require robust proton exchange membranes with stable proton conduction at elevated temperatures. Thus, proton conducting COFs under anhydrous conditions are in high demand. This review summarizes the recent progress in emerging COFs that exhibit proton conduction under anhydrous conditions, which may be prospective candidates for solid electrolytes in fuel cells.

Recent progress of covalent organic frameworks membranes: Design, synthesis, and application in water treatment

To date, significant efforts have been devoted to eliminating hazardous components to purify wastewater through the development of various nanomaterials. Covalent organic frameworks (COFs), an important branch of the porous crystalline family, possess the peculiarity of ultrahigh surface area, adjustable pore size, and facile functionality. Exciting studies from design fabrication to potential applications in water treatment by COF-based membranes (COMs) have emerged. This review summarizes various preparation strategies and synthesis mechanisms for COMs, including layer-by-layer stacking, in situ growth, interfacial polymerization, and electrochemical synthesis, and briefly describes the advanced characterization techniques for COMs. Moreover, the application of COMs in heavy metal removal, dye separation, purification of radionuclides, pollutant detection, sea water desalination, and so on, is described and discussed. Finally, the perspectives on future opportunities for designing COMs in water purification have been proposed.

Recent Progress of Crystalline Porous Frameworks for Intermediate-Temperature Proton Conduction

Proton exchange membranes (PEMs), especially for work under intermediate temperatures (100-200 °C), have attracted great interest because of the high CO toleration and facial water management of the corresponding proton exchange membrane fuel cells (PEMFCs). Traditional polymer PEMs faced challenges of low stability and proton carrier leaking. Crystalline porous materials, such as metal-organic frameworks (MOFs) and covalent organic frameworks (COFs), are promising to overcome these issues contributed by nanometer-sized channels. Herein we summarized the recent development of MOF/COF-based intermediate-temperature proton conductors. The strategies of framework engineering and pore impregnation were introduced in detail for raising proton conductivity. The proton-conducting mechanism was described as well. This spotlight will provide new insight into the fabrication of MOF/COF proton conductors under intermediate-temperature and anhydrous conditions.

Atomically Dispersed Pd-N1C3 Sites on a Nitrogen-Doped Carbon Nanosphere for Semi-hydrogenation of Acetylene

Rationally designing efficient catalysts for semi-hydrogenation of acetylene is significant but challenging. Herein, Pd isolated single-atom sites (ISAS) on a covalent-organic-framework (COF)-derived nanosphere (Pd-ISAS/CN) are synthesized by a COF-absorption-pyrolysis strategy. This synthetic strategy is also applicable for Pt and Ru ISAS catalysts, demonstrating that it is a general method to synthesize noble-metal ISAS on COF-derived carbon materials. Pd-ISAS/CN exhibits outstanding reactivity and high selectivity for semi-hydrogenation of acetylene, with 92% conversion of acetylene, 80% selectivity toward ethylene at 100 °C, and corresponding activity is as high as 712 molacetylene molmetal-1 h-1. Extended X-ray absorption fine structure (EXAFS) measurement and density functional theory (DFT) calculation reveal the Pd-N1C3 sites from Pd-ISAS/CN efficiently boost the reactivity for semi-hydrogenation of acetylene. This work will bring inspiration to rationally design noble-metal-based ISAS catalysts derived from COF materials and boost catalytic performance by optimizing the coordination environment of catalytic sites.

PAF-6 Doped with Phosphoric Acid through Alkaline Nitrogen Atoms Boosting High-Temperature Proton-Exchange Membranes for High Performance of Fuel Cells

High-temperature proton-exchange-membrane fuel cells (HT-PEMFCs) can offer improved energy efficiency and tolerance to fuel/air impurities. The high expense of the high-temperature proton-exchange membranes (HT-PEMs) and their low durability at high temperature still impede their further practical applications. In this work, a phosphoric acid (PA)-doped porous aromatic framework (PAF-6-PA) is incorporated into poly[2,2'-(p-oxydiphenylene)-5,5'-benzimidazole] (OPBI) to fabricate novel PAF-6-PA/OPBI composite HT-PEMs through solution-casting. The alkaline nitrogen structure in PAF-6 can be protonated with PA to provide proton hopping sites, and its porous structure can enhance the PA retention in the membranes, thus creating fast pathways for proton transfer. The hydrogen bond interaction between the rigid PAF-6 and OPBI can also enhance the mechanical properties and chemical stability of the composite membranes. Consequently, PAF-6-PA/OPBI exhibits an optimal proton conductivity of 0.089 S cm-1 at 200 °C, and peak power density of 437.7 mW cm-2 (Pt: 0.3 mg cm-2 ), which is significantly higher than that of the OPBI.   The PAF-6-PA/OPBI provides a novel strategy for the practical application of PBI-based HT-PEMs.

Enhanced Proton Transfer in Proton-Exchange Membranes with Interconnected and Zwitterion-Functionalized Covalent Porous Material Structures

Excellent proton-conductive accelerators are indispensable for efficient proton-exchange membranes (PEMs). Covalent porous materials (CPMs), with adjustable functionalities and well-ordered porosities, show much promise as effective proton-conductive accelerators. In this study, an interconnected and zwitterion-functionalized CPM structure based on carbon nanotubes and a Schiff-base network (CNT@ZSNW-1) is constructed as a highly efficient proton-conducting accelerator by in situ growth of SNW-1 onto carbon nanotubes (CNTs) and subsequent zwitterion functionalization. A composite PEM with enhanced proton conduction is acquired by integrating CNT@ZSNW-1 with Nafion. Zwitterion functionalization offers additional proton-conducting sites and promotes the water retention capacity. Moreover, the interconnected structure of CNT@ZSNW-1 induces a more consecutive arrangement of ionic clusters, which significantly relieves the proton transfer barrier of the composite PEM and increases its proton conductivity to 0.287 S cm^-1 under 95 % RH at 90 °C (about 2.2 times that of the recast Nafion, 0.131 S cm^-1 ). Furthermore, the composite PEM displays a peak power density of 39.6 mW cm^-2 in a direct methanol fuel cell, which is significantly higher than that of the recast Nafion (19.9 mW cm^-2 ). This study affords a potential reference for devising and preparing functionalized CPMs with optimized structures to expedite proton transfer in PEMs.

Composite materials based on covalent organic frameworks for multiple advanced applications

Covalent organic frameworks (COFs) stand for a class of emerging crystalline porous organic materials, which are ingeniously constructed with organic units through strong covalent bonds. Their excellent design capabilities, and uniform and tunable pore structure make them potential materials for various applications. With the continuous development of synthesis technique and nanoscience, COFs have been successfully combined with a variety of functional materials to form COFs-based composites with superior performance than individual components. This paper offers an overview of the development of different types of COFs-based composites reported so far, with particular focus on the applications of COFs-based composites. Moreover, the challenges and future development prospects of COFs-based composites are presented. We anticipate that the review will provide some inspiration for the further development of COFs-based composites.

Spacer-Engineered Ionic Channels in Covalent Organic Framework Membranes toward Ultrafast Proton Transport

Side-chain engineering of covalent organic frameworks as advanced ion conductors is a critical issue to be explored. Herein, ionic covalent organic framework membranes (iCOFMs) with spacer-engineered ionic channel are de novo designed and prepared. The ionic channels are decorated with side chains comprising spacers having different carbon chain lengths and the -SO₃ H groups at the end. Attributed to the synergistic contribution from the spacers and the -SO₃ H groups, the iCOFM with moderate-length spacer exhibit the highest through-plane proton conductivity of 889 mS cm^-1 at 90 °C.

Surfactant-Assisted Sulfonated Covalent Organic Nanosheets: Extrinsic Charge for Improved Ion Transport and Salinity-Gradient Energy Harvesting

Charge-governed ion transport is the vital property of nanofluidic channels for salinity-gradient energy harvesting and other electrochemical energy conversion technologies. 2D nanofluidic channels constructed by nanosheets exhibit great superiority in ion selectivity, but a high ion transport rate remains challenging due to the insufficiency of intrinsic surface charge density in nanoconfinement. Herein, extrinsic surface charge into nanofluidic channels composed of surfactant-assisted sulfonated covalent organic nanosheets (SCONs), which enable tunable ion transport behaviors, is demonstrated. The polar moiety of surfactant is embedded in SCONs to adjust in-plane surface charges, and the aggregation of nonpolar moiety results in the sol-to-gel transformation of SCON solution for membrane fabrication. The combination endows SCON/surfactant membranes with considerable water-resistance, and the designable extrinsic charges promise fast ion transport and high ion selectivity. Additionally, the SCON/surfactant membrane, serving as a power generator, exhibits huge potential in harvesting salinity-gradient energy where corresponding output power density can reach up to 9.08 W m^-2 under a 50-fold salinity gradient (0.5 m NaCl|0.01 m NaCl). The approach to extrinsic surface charge provides new and promising insight into regulating ion transport behaviors.

Construction of Covalent Organic Frameworks via Multicomponent Reactions

Multicomponent reactions (MCRs) combine at least three reactants to afford the desired product in a highly atom-economic way and are therefore viewed as efficient one-pot combinatorial synthesis tools allowing one to significantly boost molecular complexity and diversity. Nowadays, MCRs are no longer confined to organic synthesis and have found applications in materials chemistry. In particular, MCRs can be used to prepare covalent organic frameworks (COFs), which are crystalline porous materials assembled from organic monomers and exhibit a broad range of properties and applications. This synthetic approach retains the advantages of small-molecule MCRs, not only strengthening the skeletal robustness of COFs, but also providing additional driving forces for their crystallization, and has been used to prepare a series of robust COFs with diverse applications. The present perspective article provides the general background for MCRs, discusses the types of MCRs employed for COF synthesis to date, and addresses the related critical challenges and future perspectives to inspire the MCR-based design of new robust COFs and promote further progress in this emerging field.

Maneuvering Applications of Covalent Organic Frameworks via Framework-Morphology Modulation

Translating the performance of covalent organic frameworks (COFs) from laboratory to macroscopic reality demands specific morphologies. Thus, the advancement in morphological modulation has recently gained some momentum. A clear understanding of nano- to macroscopic architecture is critical to determine, optimize, and improve performances of this atomically precise porous material. Along with their chemical compositions and molecular frameworks, the prospect of morphology in various applications should be discussed and highlighted. A thorough insight into morphology versus application will help produce better-engineered COFs for practical implications. 2D and 3D frameworks can be transformed into various solids such as nanospheres, thin films, membranes, monoliths, foams, etc., for numerous applications in adsorption, separation photocatalysis, the carbon dioxide reduction, supercapacitors, and fuel cells. However, the research on COF chemistry mainly focuses on correlating structure to property, structure to morphology, and structure to applications. Here, critical insights on various morphological evolution and associated applications are provided. In each case, the underlying role of morphology is unveiled. Toward the end, a correlation between morphology and application is provided for the future development of COFs.

An improved 9 micron thick separator for a 350 Wh/kg lithium metal rechargeable pouch cell

The use of separators that are thinner than conventional separators (> 20 µm) would improve the energy densities and specific energies of lithium batteries. However, thinner separators increase the risk of internal short circuits from lithium dendrites formed in both lithium-ion and lithium metal batteries. Herein, we grow metal-organic frameworks (MOFs) inside the channels of a polypropylene separator (8 µm thick) using current-driven electrosynthesis, which aggregates the electrolyte in the MOF channels. Compared to unmodified polypropylene separators, the MOF-modified separator (9 µm thick) vastly improves the cycling stability and dendrite resistance of cells assembled with Li metal anodes and carbonate-based electrolytes. As a demonstration, a 354 Wh kg⁻¹ pouch cell with a lithium metal anode and LiNi_0.8Co_0.15Al_0.05O₂ (NCA)-based cathode (N/P = 3.96) is assembled with 9 µm layer of the MOF-modified separator and retains 80% of its capacity after 200 cycles (charged at 75 mA g⁻¹, discharged at 100 mA g⁻¹) at 25 °C.

Thin separators can improve batteries’ energy densities but increase cell shortcircuit risks. Here, the authors report an improved thin metal-organic frameworks separator to improve the dendrite formation resistance and cycling stability of high-voltage lithium battery in carbonate electrolytes.

Fast Hydroxide Conduction via Hydrogen-Bonding Network Confined in Benzimidazolium-Functionalized Covalent Organic Frameworks

In both hydrophobic and hydrophilic nanochannels, confined water clusters spontaneously form dense internal hydrogen bond networks and hence exhibit fast mass-transfer kinetics. Covalent organic frameworks (COFs), a porous polymer, enables one-dimensional open channels to achieve ordered assembly guided by synthetic techniques and allows the accommodation of a large number of water molecules within the nanochannels. In the field of alkaline anion exchange membrane fuel cells, it has been a long-term pursuit of scientists to build abundant hydrogen bonds around hydrogen oxides (OH^-) to improve the conduction of OH^- by increasing the water content. Here, we designed and synthesized a OH^- conductor by assembling benzimidazolium into COFs, and a significantly high conductivity of 10^-1 S cm^-1 was achieved at 353 K. Theoretical calculations showed that the water clusters confined in the pores of COFs and the regularly arranged hydroxides cooperatively formed a dense hydrogen bond network and OH^- conducted diffusive conduction through the Grotthuss hopping of protons in this hydrogen bond network.

Asymmetric Hydrophosphonylation of Imines to Construct Highly Stable Covalent Organic Frameworks with Efficient Intrinsic Proton Conductivity

Imine-linked covalent organic frameworks (COFs) have received widespread attention because of their structure features such as high crystallinity and tunable pores. However, the intrinsic reversibility of the imine bond leads to the poor stability of imine-linked COFs under strong acid conditions. Also, their thermal stability is significantly lower than that of many other COFs. Herein, we report for the first time that the reversible imine bonds in the skeleton of COFs can be locked through the asymmetric hydrophosphonylation reaction of phosphite. The functionalized COFs not only retain the crystallinity and porous structure but also exhibit evidently improved chemical and thermal stabilities. In addition, the phosphorous acid groups generated by acidic hydrolysis attached to the skeleton endow the COFs with good intrinsic proton conductivity. Due to the diversity of phosphite derivatives and imine-linked COFs, this work may provide an avenue for extending the COF structures and functions through the asymmetric hydrophosphonylation reaction.

Electrostatic attraction induces cationic covalent-organic framework to pack inorganic acid ions for promoting proton conduction

A cationic COF (CCOF) was imported to afford stable proton conductive material while the positively charged CCOF can constrain the inorganic anion groups into the framework through an ion exchange process. The inorganic anions could play the role of proton donors to provide a rich source of protons, as well as the proton acceptors for proton transmission, thus forming an interlinked proton conduction pathway within the framework. The proton conductivities of COF materials loaded with different anions have been improved to varying degrees, and the conductivity of H₂PO₄^-@CCOF is up to 3.86 × 10^-2 S cm^-1 at 100 °C.

Large-Area Covalent Organic Polymers Membrane via Sol-Gel Approach for Harvesting the Salinity Gradient Energy

Many materials with nanofluidic channels are exploited to achieve salinity gradient energy conversion. However, most materials are fragile, difficult to process, or only prepared into a limited size, which greatly restricts their practical application in the future. Herein, a covalent organic polymers membrane with high mechanical property and stability is fabricated, which can keep integrity in harsh conditions for up to 1 month. In addition, by using the sol-gel approach, a large-area membrane with an area of 26 × 26 cm is expediently fabricated in lab conditions. When the membrane is applied to salinity gradient energy conversion, the maximum output power density is up to 6.21 W m^-2 . This work provides a simple method for the fabrication of large-area membrane for salinity gradient energy conversion in future real-world applications.

Supramolecular Proton Conductors Self-Assembled by Organic Cages

Proton conduction is vital for living systems to execute various physiological activities. The understanding of its mechanism is also essential for the development of state-of-the-art applications, including fuel-cell technology. We herein present a bottom-up strategy, that is, the self-assembly of Cage-1 and -2 with an identical chemical composition but distinct structural features to provide two different supramolecular conductors that are ideal for the mechanistic study. Cage-1 with a larger cavity size and more H-bonding anchors self-assembled into a crystalline phase with more proton hopping pathways formed by H-bonding networks, where the proton conduction proceeded via the Grotthuss mechanism. Small cavity-sized Cage-2 with less H-bonding anchors formed the crystalline phase with loose channels filled with discrete H-bonding clusters, therefore allowing for the translational diffusion of protons, that is, vehicle mechanism. As a result, the former exhibited a proton conductivity of 1.59 × 10^-4 S/cm at 303 K under a relative humidity of 48%, approximately 200-fold higher compared to that of the latter. Ab initio molecular dynamics simulations revealed distinct H-bonding dynamics in Cage-1 and -2, which provided further insights into potential proton diffusion mechanisms. This work therefore provides valuable guidelines for the rational design and search of novel proton-conducting materials.

COF-43 based voltammetric sensor for Ag(I) determination: optimization of experimental conditions by Box-Behnken design

Hydrazone-linked covalent organic framework-43 (COF-43) was synthesized and the carbon paste electrode (CPE) modified with this COF was used as a voltammetric sensor to measure silver(I). Various characterization tests (XRD, FTIR, BET, SEM/EDX, electrochemical impedance (EIS), and cyclic voltammetry (CV)) were performed on the synthesized COF-43 and the prepared COF-43/CPE. Box-Behnken design was used to optimize the preparation and operation conditions of the sensor. EIS and CV investigations reveal the diffusive characteristics of silver transport in the electrode matrix. An appropriate mechanism for the sensor procedure has been suggested and ratified by electrochemical and SEM/EDX techniques. The COF-43 used has several recognition elements for the selective binding of silver ion and due to its high porosity provides a large space for the deposition and reduction of large amounts of silver. Therefore, due to the correct selection of COF used in the construction of the sensor, high selectivity and sensitivity for the prepared sensor has been achieved. The obtained data disclosed that the modification of the carbon paste electrode by COF-43 significantly improves the analytical characteristics of the sensor, which specifies the performance of COF-43 as a sensory material for determining silver(I). The obtained calibration curve is linear in the concentration range from 0.001 μM to 10.0 μM and the detection limit is 1.5 × 10^-10 M. Various statistical tests have been employed to evaluate the sensor performance. The appropriate accuracy and precision of the proposed method were confirmed using the analysis of variance (ANOVA) approach. Potential interferences were investigated and it was found that the other species did not have a significant effect on the sensor performance. The prepared sensor has been successfully used to measure silver in two samples of photographic effluents, bleaching, and fixing agents. The results from the analysis of real samples demonstrate the reliable applicability of the fabricated sensor.

Metal@COFs Possess High Proton Conductivity with Mixed Conducting Mechanisms

The inherent porous structures and aligned functional units inside the skeleton of covalent organic frameworks (COFs) provide an extraordinary promise for post-modification and deservedly expand their application in the field of proton conduction. Herein, we tactfully introduced copper ions into a two-dimensional COF (TpTta) furnished with ample N,O-chelating sites by a post-modification strategy to achieve two copper(II)-modified products, namely, CuCl₂@TpTta-3 and CuCl₂@TpTta-10. Inspiringly, the two modified COFs demonstrated the higher conductivities of 1.77 × 10^-3 and 8.81 × 10^-3 S cm^-1 under 100 °C and 98% relative humidity, respectively, among the previously reported COFs with higher σ values. In comparison to the pristine COFs, the σ values of CuCl₂@TpTta-3 and CuCl₂@TpTta-10 are boosted by 2 orders of magnitude. On the basis of structural analyses, nitrogen and water vapor adsorption tests, and proton conduction mechanism analysis, we deeply analyzed the reason why the conductivity of the modified COFs was significantly increased. To the best of our knowledge, it is the first time to employ the CuCl₂-modified strategy to boost the conductivity of COFs, which offers a wise idea for the fabrication of highly conductive materials in the field of fuel cells.

Covalent Organic Frameworks with Record Pore Apertures

The pore apertures dictate the guest accessibilities of the pores, imparting diverse functions to porous materials. It is highly desired to construct crystalline porous polymers with predesignable and uniform mesopores that can allow large organic, inorganic, and biological molecules to enter. However, due to the ease of the formation of interpenetrated and/or fragile structures, the largest pore aperture reported in the metal-organic frameworks is 8.5 nm, and the value for covalent organic frameworks (COFs) is only 5.8 nm. Herein, we construct a series of COFs with record pore aperture values from 7.7 to 10.0 nm by designing building blocks with large conformational rigidness, planarity, and suitable local polarity. All of the obtained COFs possess eclipsed stacking structures, high crystallinity, permanent porosity, and high stability. As a proof of concept, we successfully employed these COFs to separate pepsin that is ∼7 nm in size from its crudes and to protect tyrosinase from heat-induced deactivation.

Ultralarge Free-Standing Imine-Based Covalent Organic Framework Membranes Fabricated via Compression

Demand continues for processing methods to shape covalent organic frameworks (COFs) into macroscopic objects that are needed for their practical applications. Herein, a simple compression method to prepare large-scale, free-standing homogeneous and porous imine-based COF-membranes with dimensions in the centimeter range and excellent mechanical properties is reported. This method entails the compression of imine-based COF-aerogels, which undergo a morphological change from an elastic to plastic material. The COF-membranes fabricated upon compression show good performances for the separation of gas mixtures of industrial interest, N₂ /CO₂ and CH₄ /CO₂ . It is believed that the new procedure paves the way to a broader range of COF-membranes.

PANa/Covalent organic framework composites with improved water uptake and proton conductivity

It is a challenge to effectively load proton carriers in COFs to improve their proton conductivity. Herein, we report a series of COF-based composites, PANa@UCOF-x (PANa: sodium polyacrylate, x: weight percentage of PANa), which were prepared by coating different proportions of superabsorbent PANa on the COF surface based on an in situ reaction strategy. Since PANa can greatly enhance the enrichment of water molecules in one-dimensional (1D) channels of COFs, these COF-based composites exhibit superprotonic conduction. At 80 °C and 95% relative humidity (RH), the proton conductivity of PANa@UCOF-10, PANa@UCOF-28 and PANa@UCOF-40 reaches 1.6 × 10^-2, 5.1 × 10^-2, and 1.1 × 10^-1 S cm^-1, respectively, which is 4-5 orders of magnitude higher than 7.4 × 10^-7 S cm^-1 of the original UCOF. This work not only develops a new method to improve the water content of the COF channels, but also proves the important role of ordered channels in constructing effective proton conduction pathways.

Ionic covalent organic framework based electrolyte for fast-response ultra-low voltage electrochemical actuators

Electrically activated soft actuators with large deformability are important for soft robotics but enhancing durability and efficiency of electrochemical actuators is challenging. Herein, we demonstrate that the actuation performance of an ionic two-dimensional covalent-organic framework based electrochemical actuator is improved through the ordered pore structure of opening up efficient ion transport routes. Specifically, the actuator shows a large peak to peak displacement (9.3 mm, ±0.5 V, 1 Hz), a fast-response time to reach equilibrium-bending (~1 s), a correspondingly high bending strain difference (0.38%), a broad response frequency (0.1–20 Hz) and excellent durability (>99%) after 23,000 cycles. The present study ascertains the functionality of soft electrolyte as bionic artificial actuators while providing ideas for expanding the limits in applications for robots.

Electrically activated soft actuators with large deformability are important for soft robotics but enhancing durability and efficiency of electrochemical actuators is challenging. Here the authors demonstrate that the actuation performance of an ionic two-dimensional covalent-organic framework based electrochemical actuator is improved through the ordered pore structure of opening up efficient ion transport routes

Emerging porous organic polymers for biomedical applications

This review summarizes and discusses the recent progress in porous organic polymers for diverse biomedical applications such as drug delivery, biomacromolecule immobilization, phototherapy, biosensing, bioimaging, and antibacterial applications.

An Overview of Metal-free Sustainable Nitrogen-based Catalytic Knoevenagel Condensation Reaction ‎

Knoevenagel condensation reaction counts as a vital condensation in organic chemistry due to the synthesis of valuable intermediates, ‎heterocycles, and fine chemicals from commercially available reactants through forming new C=C...

Resistive Memory Devices Based on Reticular Materials for Electrical Information Storage

Recently, reticular materials, such as metal-organic frameworks and covalent organic frameworks, have been proposed as an active insulating layer in resistive switching memory systems through their chemically tunable porous structure. A resistive random access memory (RRAM) cell, a digital memristor, is one of the most outstanding emergent memory devices that achieves high-density electrical information storage with variable electrical resistance states between two terminals. The overall design of the RRAM devices comprises an insulating layer sandwiched between two metal electrodes (metal/insulator/metal). RRAM devices with fast switching speeds and enhanced storage density have the potential to be manufactured with excellent scalability owing to their relatively simple device architecture. In this review, recent progress on the development of reticular material-based RRAM devices and the study of their operational mechanisms are reviewed, and new challenges and future perspectives related to reticular material-based RRAM are discussed.

Alkaline Stability of Low Oxophilicity Metallopolymer Anion-Exchange Membranes

Anion-exchange membrane fuel cells (AEMFCs) are promising energy conversion devices due to their high efficiency and relatively low cost. Nonetheless, AEMFC operation time is currently limited by the low chemical stability of their polymeric anion-exchange membranes. In recent years, metallopolymers, where the metal centers assume the ion transport function, have been proposed as a chemically stable alternative. Here we present a systematic study using a polymer backbone with side-chain N-heterocyclic carbene (NHC) ligands complexed to various metals with low oxophilicity, such as copper, zinc, nickel, and gold. The golden metallopolymer, using the metal with the lowest oxophilicity, demonstrates exceptional alkaline stability, far superior to state-of-the-art quaternary ammonium cations, as well as good in-situ AEMFC results. These results demonstrate that judiciously designed metallopolymers may be superior to purely organic membranes and provides a scientific base for further developments in the field.

Ionic Covalent Organic Frameworks for Energy Devices

Covalent organic frameworks (COFs) are a class of porous crystalline materials whose facile preparation, functionality, and modularity have led to their becoming powerful platforms for the development of molecular devices in many fields of (bio)engineering, such as energy storage, environmental remediation, drug delivery, and catalysis. In particular, ionic COFs (iCOFs) are highly useful for constructing energy devices, as their ionic functional groups can transport ions efficiently, and the nonlabile and highly ordered all-covalent pore structures of their backbones provide ideal pathways for long-term ionic transport under harsh electrochemical conditions. Here, current research progress on the use of iCOFs for energy devices, specifically lithium-based batteries and fuel cells, is reviewed in terms of iCOF backbone-design strategies, synthetic approaches, properties, engineering techniques, and applications. iCOFs are categorized as anionic COFs or cationic COFs, and how each of these types of iCOFs transport lithium ions, protons, or hydroxides is illustrated. Finally, the current challenges to and future opportunities for the utilization of iCOFs in energy devices are described. This review will therefore serve as a useful reference on state-of-the-art iCOF design and application strategies focusing on energy devices.

Two-Dimensional Polymers and Polymerizations

Synthetic chemists have developed robust methods to synthesize discrete molecules, linear and branched polymers, and disordered cross-linked networks. However, two-dimensional polymers (2DPs) prepared from designed monomers have been long missing from these capabilities, both as objects of chemical synthesis and in nature. Recently, new polymerization strategies and characterization methods have enabled the unambiguous realization of covalently linked macromolecular sheets. Here we review 2DPs and 2D polymerization methods. Three predominant 2D polymerization strategies have emerged to date, which produce 2DPs either as monolayers or multilayer assemblies. We discuss the fundamental understanding and scope of each of these approaches, including: the bond-forming reactions used, the synthetic diversity of 2DPs prepared, their multilayer stacking behaviors, nanoscale and mesoscale structures, and macroscale morphologies. Additionally, we describe the analytical tools currently available to characterize 2DPs in their various isolated forms. Finally, we review emergent 2DP properties and the potential applications of planar macromolecules. Throughout, we highlight achievements in 2D polymerization and identify opportunities for continued study.

Preparation of a Novel Resin Based Covalent Framework Material and Its Application in the Determination of Phenolic Endocrine Disruptors in Beverages by SPE-HPLC

A new type of economical covalent organic framework material(COF), namely resin based covalent organic framework material, was prepared by combining resin and covalent organic framework material by hydrothermal synthesis, which was based on the preparation of traditional COF material(TpBD COF). The properties of the material and covalent organic framework material were compared in the way of characterization, and the possible reaction mechanism was analyzed. The solid phase extraction separation (SPE) ability of this material for four kinds of phenolic endocrine disrupting compounds (bisphenol F, bisphenol A, octylphenol and nonylphenol) in beverage samples was investigated. The results showed that the prepared COF materials had abundant internal channels, ordered structure, large specific surface area (TpBD COF: 814.6 m2/g and resin based COF: 623.9 m2/g) and good thermal stability (pyrolysis temperature was 443 °C and 437 °C, respectively). Solid phase extraction experiments demonstrated that the two COF materials as adsorbent of solid phase extraction column had ideal adsorption separation effect and good anti-interference ability, and had strong anti-interference ability. The SPE effect was superior to the traditional solid phase extraction column. The precision RSD of this method was less than 3%. This SPE method had high recovery and could be reused (carbonated beverage: 98.18-102.18% and beverage: 98.52-101.79%), In addition, the recovery of the material did not change significantly in the 50 cycles of solid phase extraction, indicating that the material had good stability and could be reused, which could meet the requirements for the detection and analysis of trace pollutants in environmental samples. The resin based COF material prepared in this study could reduce the cost of monomer uses and provide a possibility for its industrial production. At the same time, as an efficient SPE adsorbent, it also provided a new research scheme for the enrichment of trace phenolic endocrine disruptors in beverage samples.

Host-Guest Assembly of H-Bonding Networks in Covalent Organic Frameworks for Ultrafast and Anhydrous Proton Transfer

An anhydrous proton conductor represents a key material for the manufacture of high-energy electrical devices. Incorporation of proton carriers into the vacancies of the porous solid provides an effective method for their preparation, but the weak or even no interactions between the ion carriers and the porous solids causing a serious leaking of ion carriers result in trade-off of long-term conductivity. In this term, we developed a host-guest supramolecular chemistry-induced strategy to assemble hydrogen bond networks along the 1D nanochannels of covalent organic frameworks (COFs) for ultrafast and anhydrous proton transfer (1.33 × 10^-2 S cm^-1 at 140 °C). Solid-state NMR was applied to explore guest interaction between protic ionic liquids (PILs) and the COFs to investigate the proton transport mechanism. This work presents an excellent example of accumulation of PILs into the nanochannels of COFs for anhydrous proton conduction at high temperature, demonstrating great advantages of COFs to serve as a supramolecular host for holding/transiting ions in the solid state.

Ion-Exchanged UPG-1 as Potential Electrolyte for Fuel Cells

Proton-exchange membrane fuel cells are an attractive green technology for energy production. However, one of their major drawbacks is instability of the electrolytes under working conditions (i.e., temperature and humidity). Some metal-organic frameworks (MOFs) have recently emerged as promising alternative electrolyte materials because of their higher stability (compared with the organic polymers currently used as electrolytes), proton conductivity, and outstanding porosity and versatility. Here, we present ionic exchange in a microporous zirconium phosphonate, UPG-1, as an efficient strategy to enhance its conductivity and cyclability. Thus, labile protons of the hybrid structure were successfully replaced by different alkali cations (Li⁺, Na⁺, and K⁺), leading to 2 orders of magnitude higher proton conductivity than the pristine UPG-1 (up to 2.3 × 10^-2 S·cm^-1, which is comparable with those of the commercial electrolytes). Further, the proton conductivity was strongly influenced by the MOF hydrophilicity and the polarization strength of the cation, as suggested by molecular simulation. Finally, a mixed-matrix membrane containing the best-performing material (the potassium-exchanged one) was successfully prepared, showing moderate proton conductivity (up to 8.51 × 10^-3 S·cm^-1).

Synthesis of Ionic Vinylene-Linked Covalent Organic Frameworks through Quaternization-Activated Knoevenagel Condensation

We developed a simple approach to synthesizing ionic vinylene-linked two-dimensional covalent organic frameworks (COFs) through a quaternization-promoted Knoevenagel condensation at three aromatic methyl carbon atoms of N-ethyl-2,4,6-trimethylpyridinium halide with multitopic aromatic aldehyde derivatives. The resultant COFs exhibited a honeycomb-like structure with high crystallinity and surface areas as large as 1343 m²  g^-1 . The regular shape-persistent nanochannels and the positively charged polymeric frameworks allowed the COFs to be uniformly composited with linear polyethylene oxide and lithium salt, displaying ionic conductivity as high as 2.72×10^-3  S cm^-1 .

Recent Advances on Conductive 2D Covalent Organic Frameworks

As a burgeoning family of crystalline porous copolymers, covalent organic frameworks (COFs) allow precise atomic insertion of organic components in the topology construction to form periodic networks and ordered nanopores. Their 2D networks bear great similarities to graphene analogs, and therefore are essential additions to the 2D family. Here, the electronic properties of conductive 2D-COFs are reviewed and their bonding strategies and structural characteristics are examined in detail. The controlling approaches toward the morphologies of conductive 2D-COFs are further explored, followed by a discussion of their applications in field-effect transistors, photodetectors, sensors, catalysis, and energy storage. Finally, research challenges and forthcoming developments are projected. The resulting survey reveals that the extended porous 2D organic networks with conductive properties will provide great opportunities and essential innovations in various electronics and energy-related fields.