Programmable Nucleic Acid Nanoswitches for the Rapid, Single-Step Detection of Antibodies in Bodily Fluids

Target-responsive triplex aptamer nanoswitch enables label-free and ultrasensitive detection of antibody in human serum via lighting-up RNA aptamer transcriptions

Accurate and sensitive monitoring of the concentration change of anti-digoxigenin (Anti-Dig) antibody is of great importance for diagnosing infectious and immunological diseases. Combining a novel triplex aptamer nanoswitch and the high signal-to-noise ratio of lighting-up RNA aptamer signal amplification, a label-free and ultrasensitive fluorescent sensing approach for detecting Anti-Dig antibodies is described. The target Anti-Dig antibodies recognize and bind with the nanoswitch to open its triplex helix stem structure to release Taq DNA polymerase and short ssDNA primer simultaneously, which activates the Taq DNA polymerase to initiate downstream strand extension of ssDNA primer to yield specific dsDNA containing RNA promoter sequence. T7 RNA polymerase recognizes and binds to these promoter sequences to initiate RNA transcription reaction to produce many RNA aptamer sequences. These aptamers can recognize and bind with Malachite Green (MG) dye specifically and produce highly amplified fluorescent signal for monitoring Anti-Dig antibodies from 50 pM to 50 nM with a detection limit down to 33 pM. The method also exhibits high selectivity for Anti-Dig antibodies and can be used to discriminate trace Anti-Dig antibodies in diluted serum samples. Our method is superior to many immunization-based Anti-Dig antibody detection methods and thus holds great potential for monitoring disease progression and efficacy.

One-Pot Detection of Proteins Using a Two-Way Extension-Based Assay with Cas12a

Protein biomarkers are an important class of biomarkers in disease diagnosis and are traditionally detected by enzyme-linked immunosorbent assay and mass spectrometry, which involve multiple steps and a complex workflow. In recent years, many CRISPR-Cas12a-based methods for protein detection have been developed; however, most of them have not overcome the workflow complications observed in traditional assays, limiting their applicability in point-of-care testing. In this work, we designed a single-step, one-pot, and proximity-based isothermal immunoassay integrating CRISPR Cas12a for homogeneous protein target detection with a simplified workflow and high sensitivity. Probes consisting of different binders (small molecule, aptamer, and antibody) conjugated with oligonucleotides undergo two-way extension upon binding to the protein targets, leading to downstream DNA amplification by a pair of nicking enzymes and polymerases to generate target sequences for Cas12a signal generation. We used the streptavidin-biotin model to demonstrate the design of our assay and proved that all three elements of protein detection (target protein binding, DNA amplification, and Cas12a signal generation) could coexist in one pot and proceed isothermally in a single buffer system at a low reaction volume of 10 μL. The plug-and-play applicability of our assay has been successfully demonstrated using four different protein targets, streptavidin, PDGF-BB, antidigoxigenin antibody, and IFNγ, with the limit of detection ranging from fM to pM.

PAM-Engineered Toehold Switches as Input-Responsive Activators of CRISPR-Cas12a for Sensing Applications

The RNA-programmed CRISPR effector protein Cas12a has emerged as a powerful tool for gene editing and molecular diagnostics. However, additional bio-engineering strategies are required to achieve control over Cas12a activity. Here, we show that Toehold Switch DNA hairpins, presenting a rationally designed locked protospacer adjacent motif (PAM) in the loop, can be used to control Cas12a in response to molecular inputs. Reconfiguring the Toehold Switch DNA from a hairpin to a duplex conformation through a strand displacement reaction provides an effective means to modulate the accessibility of the PAM, thereby controlling the binding and cleavage activities of Cas12a. Through this approach, we showcase the potential to trigger downstream Cas12a activity by leveraging proximity-based strand displacement reactions in response to target binding. By utilizing the trans-cleavage activity of Cas12a as a signal transduction method, we demonstrate the versatility of our approach for sensing applications. Our system enables rapid, one-pot detection of IgG antibodies and small molecules with high sensitivity and specificity even within complex matrices. Besides the bioanalytical applications, the switchable PAM-engineered Toehold Switches serve as programmable tools capable of regulating Cas12a-based targeting and DNA processing in response to molecular inputs and hold promise for a wide array of biotechnological applications.

Point-of-care detection of Monkeypox virus clades using high-performance upconversion nanoparticle-based lateral flow assay

There is an urgent need for a point-of-care testing (POCT) method in developing and underserved regions to distinguish between two Monkeypox virus (MPXV) clades, given their varying transmissibility and clinical manifestations. In this paper, we target the specific complement protein gene fragment of two MPXV clades and construct a high-performance upconversion nanoparticles-based lateral flow assay (UCNPs-based LFA) with double T-lines and a shared C-line. This enables qualitative and quantitative dual-mode detection when combined with a smartphone and a benchtop fluorescence analyzer. The developed LFA exhibits stable performance, convenient operation, rapid readout (within 8 min), and a much lower limit of detection (LOD) (~ pM level) compared to existing POCT methods. The proposed detection platform demonstrates significant potential for pathogen diagnosis using a POCT approach.

Enzyme-Linked DNA Displacement (ELIDIS) Assay for Ultrasensitive Electrochemical Detection of Antibodies

Here we report the development of a method for the electrochemical ultrasensitive detection of antibodies that couples the programmability and versatility of DNA-based systems with the sensitivity provided by enzymatic amplification. The platform, termed Enzyme-Linked DNA Displacement (ELIDIS), is based on the use of antigen-DNA conjugates that, upon the bivalent binding of a specific target antibody, induce the release of an enzyme-DNA hybrid strand from a preformed duplex. Such enzyme-DNA hybrid strand can then be electrochemically detected with a disposable electrode with high sensitivity. We applied ELIDIS to demonstrate the sensitive (limit of detection in the picomolar range), specific and multiplexed detection of five different antibodies including three clinically relevant ones. ELIDIS is also rapid (it only requires two reaction steps), works well in complex media (serum) and is cost-effective. A direct comparison with a commercial ELISA kit for the detection of Cetuximab demonstrates the promising features of ELIDIS as a point-of-care platform for antibodies detection.

Rationally Designed DNA-Based Scaffolds and Switching Probes for Protein Sensing

The detection of a protein analyte and use of this type of information for disease diagnosis and physiological monitoring requires methods with high sensitivity and specificity that have to be also easy to use, rapid and, ideally, single step. In the last 10 years, a number of DNA-based sensing methods and sensors have been developed in order to achieve quantitative readout of protein biomarkers. Inspired by the speed, specificity, and versatility of naturally occurring chemosensors based on structure-switching biomolecules, significant efforts have been done to reproduce these mechanisms into the fabrication of artificial biosensors for protein detection. As an alternative, in scaffold DNA biosensors, different recognition elements (e.g., peptides, proteins, small molecules, and antibodies) can be conjugated to the DNA scaffold with high accuracy and precision in order to specifically interact with the target protein with high affinity and specificity. They have several advantages and potential, especially because the transduction signal can be drastically enhanced. Our aim here is to provide an overview of the best examples of structure switching-based and scaffold DNA sensors, as well as to introduce the reader to the rational design of innovative sensing mechanisms and strategies based on programmable functional DNA systems for protein detection.

A chimeric hairpin DNA aptamer-based biosensor for monitoring the therapeutic drug bevacizumab

The accurate and rapid detection of specific antibodies in blood is very important for efficient diagnosis and precise treatment. Conventional methods often suffer from time-consuming operations and/or a narrow detection range. In this work, for the rapid determination of bevacizumab in plasma, a series of chimeric hairpin DNA aptamer-based probes were designed by the modification, labeling and theoretical computation of an original aptamer. Then, the dissociation constant of the modified hairpin DNA to bevacizumab was measured and screened using microscale thermophoresis. The best chimeric hairpin DNA aptamer-based probe was then selected, and a one-step platform for the rapid determination of bevacizumab was constructed. This strategy has the advantages of being simple, fast and label-free. Because of the design and screening of the hairpin DNA, as well as the optimization of the concentration and electrochemical parameters, a low detection limit of 0.37 pM (0.054 ng mL-1) with a wide linear range (1 pM-1 μM) was obtained. Finally, the rationally constructed biosensor was successfully applied to the determination of bevacizumab in spiked samples, and it showed good accuracy and precision. This method is expected to truly realize accurate and rapid detection of bevacizumab and provides a new idea for the precise treatment of diseases.

Bispecific Antibody Detection Using Antigen-Conjugated Synthetic Nucleic Acid Strands

We report here the development of two different sensing strategies based on the use of antigen-conjugated nucleic acid strands for the detection of a bispecific antibody against the tumor-related proteins Mucin1 and epidermal growth factor receptor. Both approaches work well in serum samples (nanomolar sensitivity), show high specificity against the two monospecific antibodies, and are rapid. The results presented here demonstrate the versatility of DNA-based platforms for the detection of bispecific antibodies and could represent a versatile alternative to other more reagent-intensive and time-consuming analytical approaches.

Enzyme - Switch sensors for therapeutic drug monitoring of immunotherapies

Therapeutic monoclonal antibodies (TmAb) have emerged as effective treatments for a number of cancers and autoimmune diseases. However, large interpatient disparities in the pharmacokinetics of TmAb treatment requires close therapeutic drug monitoring (TDM) to optimise dosage for individual patients. Here we demonstrate an approach for achieving rapid, sensitive quantification of two monoclonal antibody therapies using a previously described enzyme switch sensor platform. The enzyme switch sensor consists of a β-lactamase - β-lactamase inhibitor protein (BLA-BLIP) complex with two anti-idiotype binding proteins (Affimer proteins) as recognition elements. The BLA-BLIP sensor was engineered to detect two TmAbs (trastuzumab and ipilimumab) by developing constructs incorporating novel synthetic binding reagents to each of these mAbs. Trastuzumab and ipilimumab were successfully monitored with sub nM sensitivity in up to 1% serum, thus covering the relevant therapeutic range. Despite the modular design, the BLA-BLIP sensor was unsuccessful in detecting two further TmAbs (rituximab and adalimumab), an explanation for which was explored. In conclusion, the BLA-BLIP sensors provide a rapid biosensor for TDM of trastuzumab and ipilimumab with the potential to improve therapy. The sensitivity of this platform alongside its rapid action would be suitable for bedside monitoring in a point-of-care (PoC) setting.

Fluorescent Investigation of Proteins Using DNA-Synthetic Ligand Conjugates

The unfathomable role that fluorescence detection plays in the life sciences has prompted the development of countless fluorescent labels, sensors, and analytical techniques that can be used to detect and image proteins or investigate their properties. Motivated by the demand for simple-to-produce, modular, and versatile fluorescent tools to study proteins, many research groups have harnessed the advantages of oligodeoxynucleotides (ODNs) for scaffolding such probes. Tight control over the valency and position of protein binders and fluorescent dyes decorating the polynucleotide chain and the ability to predict molecular architectures through self-assembly, inherent solubility, and stability are, in a nutshell, the important properties of DNA probes. This paper reviews the progress in developing DNA-based, fluorescent sensors or labels that navigate toward their protein targets through small-molecule (SM) or peptide ligands. By describing the design, operating principles, and applications of such systems, we aim to highlight the versatility and modularity of this approach and the ability to use ODN-SM or ODN-peptide conjugates for various applications such as protein modification, labeling, and imaging, as well as for biomarker detection, protein surface characterization, and the investigation of multivalency.

Programming conformational cooperativity to regulate allosteric protein-oligonucleotide signal transduction

Conformational cooperativity is a universal molecular effect mechanism and plays a critical role in signaling pathways. However, it remains a challenge to develop artificial molecular networks regulated by conformational cooperativity, due to the difficulties in programming and controlling multiple structural interactions. Herein, we develop a cooperative strategy by programming multiple conformational signals, rather than chemical signals, to regulate protein-oligonucleotide signal transduction, taking advantage of the programmability of allosteric DNA constructs. We generate a cooperative regulation mechanism, by which increasing the loop lengths at two different structural modules induced the opposite effects manifesting as down- and up-regulation. We implement allosteric logic operations by using two different proteins. Further, in cell culture we demonstrate the feasibility of this strategy to cooperatively regulate gene expression of PLK1 to inhibit tumor cell proliferation, responding to orthogonal protein-signal stimulation. This programmable conformational cooperativity paradigm has potential applications in the related fields.

Thermofluorimetric Analysis (TFA) using Probes with Flexible Spacers: Application to Direct Antibody Sensing and to Antibody-Oligonucleotide (AbO) Conjugate Valency Monitoring

Antibodies have long been recognized as clinically relevant biomarkers of disease. The onset of a disease often stimulates antibody production in low quantities, making it crucial to develop sensitive, specific, and easy-to-use antibody assay platforms. Antibodies are also extensively used as probes in bioassays, and there is a need for simpler methods to evaluate specialized probes, such as antibody-oligonucleotide (AbO) conjugates. Previously, we demonstrated that thermofluorimetric analysis (TFA) of analyte-driven DNA assembly can be leveraged to detect protein biomarkers using AbO probes. A key advantage of this technique is its ability to circumvent autofluorescence arising from biological samples, which otherwise hampers homogeneous assays. The analysis of differential DNA melt curves (dF/dT) successfully distinguishes the signal from the background and interferences. Expanding the applicability of TFA further, herein we demonstrate a unique proximity based TFA assay for antibody quantification that is functional in 90% human plasma. We show that the conformational flexibility of the DNA-based proximity probes is critically important for optimal performance in these assays. To promote stable, proximity-induced hybridization of the short DNA strands, substitution of poly(ethylene glycol) (PEG) spacers in place of ssDNA segments led to improved conformational flexibility and sensor performance. Finally, by applying these flexible spacers to study AbO conjugates directly, we validate this modified TFA approach as a novel tool to elucidate the probe valency, clearly distinguishing between monovalent and multivalent AbOs and reducing the reagent amounts by 12-fold.

Synthetic Antigen-Conjugated DNA Systems for Antibody Detection and Characterization

Antibodies are among the most relevant biomolecular targets for diagnostic and clinical applications. In this Perspective, we provide a critical overview of recent research efforts focused on the development and characterization of devices, switches, and reactions based on the use of synthetic antigen-conjugated DNA strands designed to be responsive to specific antibodies. These systems can find applications in sensing, drug-delivery, and antibody-antigen binding characterization. The examples described here demonstrate how the programmability and chemical versatility of synthetic nucleic acids can be used to create innovative analytical tools and target-responsive systems with promising potentials.

Chemically programmable bacterial probes for the recognition of cell surface proteins

Common methods to label cell surface proteins (CSPs) involve the use of fluorescently modified antibodies (Abs) or small-molecule-based ligands. However, optimizing the labeling efficiency of such systems, for example, by modifying them with additional fluorophores or recognition elements, is challenging. Herein we show that effective labeling of CSPs overexpressed in cancer cells and tissues can be obtained with fluorescent probes based on chemically modified bacteria. The bacterial probes (B-probes) are generated by non-covalently linking a bacterial membrane protein to DNA duplexes appended with fluorophores and small-molecule binders of CSPs overexpressed in cancer cells. We show that B-probes are exceptionally simple to prepare and modify because they are generated from self-assembled and easily synthesized components, such as self-replicating bacterial scaffolds and DNA constructs that can be readily appended, at well-defined positions, with various types of dyes and CSP binders. This structural programmability enabled us to create B-probes that can label different types of cancer cells with distinct colors, as well as generate very bright B-probes in which the multiple dyes are spatially separated along the DNA scaffold to avoid self-quenching. This enhancement in the emission signal enabled us to label the cancer cells with greater sensitivity and follow the internalization of the B-probes into these cells. The potential to apply the design principles underlying B-probes in therapy or inhibitor screening is also discussed here.

Proximity binding-initiated DNA walker and CRISPR/Cas12a reaction for dual signal amplification detection of thrombin

We report here a highly sensitive fluorescent thrombin biomarker sensing method by integrating the DNA walker and CRISPR/Cas12a system. The presence of thrombin causes the localization of DNA moving arms on AuNP tracks via their proximity bindings with the dye-labeled probes immobilized on AuNPs. With the assistance of the primer and DNA polymerase, the arm sequences move continuously on the AuNP tracks to generate many CRISPR/Cas12a-responsive dsDNAs, which push the dye to move away from AuNPs to restore its fluorescence. Moreover, the dsDNAs can be recognized and cut by the CRISPR/Cas12a to trigger its trans-cleavage activity for cyclically cleaving the fluorescently quenched signal probes on the AuNP tracks, which liberates the dye from AuNPs to further enhance the fluorescence restoration to achieve highly sensitive thrombin assay with detection limit of 29.5 fM. Selectively detecting thrombin against other interference proteins and in diluted serums by such sensing method has also been verified, making it an attractive approach for monitoring other protein biomarkers at low levels for the diagnosis of diseases.

Programmable Nanostructures Based on Framework-DNA for Applications in Biosensing

DNA has been actively utilized as bricks to construct exquisite nanostructures due to their unparalleled programmability. Particularly, nanostructures based on framework DNA (F-DNA) with controllable size, tailorable functionality, and precise addressability hold excellent promise for molecular biology studies and versatile tools for biosensor applications. In this review, we provide an overview of the current development of F-DNA-enabled biosensors. Firstly, we summarize the design and working principle of F-DNA-based nanodevices. Then, recent advances in their use in different kinds of target sensing with effectiveness have been exhibited. Finally, we envision potential perspectives on the future opportunities and challenges of biosensing platforms.

A programmable catalytic molecular nanomachine for highly sensitive protein and small molecule detection

Herein, we report the construction of a programmable catalytic molecular nanomachine based on a cross-linked catalytic hairpin assembly (CCHA) reaction for the one-step highly sensitive detection of proteins and small molecules. In this system, when the recognition elements attached on split initiators bind to the target proteins, it can trigger the cascade of the CCHA reaction, resulting in the formation of many macromolecular fluorescent products for signaling. This platform couples the advantages of highly efficient DNA-based nanotechnology with specific protein-small molecule interactions. We demonstrated the sensitive detection of streptavidin and anti-digoxigenin antibody with detection limits as low as 48.8 pM and 0.85 nM, respectively. This nanomachine also demonstrated its flexibility in the nanomolar detection of corresponding small molecules, such as biotin and digoxigenin, using a competitive method. In addition, the nanomachine was robust enough to perform well with human serum samples. Overall, this programmable catalytic molecular nanomachine provides a versatile platform for the detection of proteins and small molecules by replacing the recognition elements, which can promote the development of DNA nanotechnology in disease diagnosis and therapeutic drug monitoring.

Homogeneous protein assays mediated by dynamic DNA nanotechnology

Driven by recent advances in DNA nanotechnology, analytical methods have been greatly improved for designing simple and homogeneous assays for proteins. The translation from target proteins to DNA outputs dramatically enhances the sensitivity of protein assays. More importantly, the protein-responsive DNA nanotechnology has offered diverse assay mechanisms, allowing flexible assay designs and high sensitivity without the need for sophisticated operational procedures. This review will focus on the design principles and mechanistic insight of analytical assays mediated by protein-responsive DNA nanotechnology, which will serve a general guide for assay design and applications.

Enhancement of CRISPR/Cas12a trans-cleavage activity using hairpin DNA reporters

The RNA programmed non-specific (trans) nuclease activity of CRISPR-Cas Type V and VI systems has opened a new era in the field of nucleic acid-based detection. Here, we report on the enhancement of trans-cleavage activity of Cas12a enzymes using hairpin DNA sequences as FRET-based reporters. We discover faster rate of trans-cleavage activity of Cas12a due to its improved affinity (K_m) for hairpin DNA structures, and provide mechanistic insights of our findings through Molecular Dynamics simulations. Using hairpin DNA probes we significantly enhance FRET-based signal transduction compared to the widely used linear single stranded DNA reporters. Our signal transduction enables faster detection of clinically relevant double stranded DNA targets with improved sensitivity and specificity either in the presence or in the absence of an upstream pre-amplification step.

Amplifying Intermolecular Events by Streptavidin-Induced Proximity

Weak interactions between biomolecules play important roles in many cellular functions. Structural and kinetic analyses of these interactions, however, have been hindered by the transient nature of such events. Here, we pointed out a general approach to overcome this obstacle─anchoring the molecular partners to streptavidin hosts─and achieved constrained proximity and stoichiometry for the sought-after molecular coupling. We elaborated this idea through a series of DNA hybridization reactions and quantitatively characterized them using single-molecule experiments. Compared to a nominally 1 μM solution, for example, the streptavidin-induced proximity (SIP) amounted to an effective molarity of ∼10-30 μM for the binding partners. There was also a significantly increased proportion of molecular association, manifested in both ensemble population and single-molecule residence time. As an application example, we showed how SIP enabled the observation and quantitative characterization of an unstable complex between Cas9-RNA and noncognate DNA substrates, interactions that had been challenging to characterize previously. Conceptually simple and implementationally robust, SIP was shown to considerably enhance the efficacy in capturing weak interactions and, as demonstrated here, could empower scientists to see the otherwise unseeable.

Chemiluminescent screening of specific hybridoma cells via a proximity-rolling circle activated enzymatic switch

The mass-production capability of hybridoma technology is bottlenecked by the routine screening procedure which is time-consuming and laborious as the requirement of clonal expansion. Here, we describe a 1-day chemiluminescent screening protocol for specific hybridoma cells on conventional 96-well plate via a proximity-rolling circle activated enzymatic switch (P-RCAES) strategy. The P-RCAES uses a pair of antigen-DNA probes to recognize secreted specific antibody and proximity-induce rolling circle amplification for mass-production of pyrophosphate to activate Cu(II) inhibited horseradish peroxidase and generate a strong chemiluminescent signal. The P-RCAES based homogeneous chemiluminescent assay can detect antibody down to 18 fM, and enables the screening of specific hybridoma cells secreting PCSK9 antibody at single-cell level without tedious cloning process. The proposed fast screening protocol has good expansibility without need of sophisticated instruments, and provides a screening method for greatly improving the efficiency of hybridoma technology.

In order to realize fast screening of specific hybridoma cells in hybridoma technology, a 1-day chemiluminescent screening method is reported on common 96-well plate via a proximity-rolling circle activated enzymatic switch strategy.

Programmable Cell-Free Transcriptional Switches for Antibody Detection

We report here the development of a cell-free in vitro transcription system for the detection of specific target antibodies. The approach is based on the use of programmable antigen-conjugated DNA-based conformational switches that, upon binding to a target antibody, can trigger the cell-free transcription of a light-up fluorescence-activating RNA aptamer. The system couples the unique programmability and responsiveness of DNA-based systems with the specificity and sensitivity offered by in vitro genetic circuitries and commercially available transcription kits. We demonstrate that cell-free transcriptional switches can efficiently measure antibody levels directly in blood serum. Thanks to the programmable nature of the sensing platform, the method can be adapted to different antibodies: we demonstrate here the sensitive, rapid, and cost-effective detection of three different antibodies and the possible use of this approach for the simultaneous detection of two antibodies in the same solution.

DNA tile self-assembly driven by antibody-mediated four-way branch migration

The antibody-mediated four-way branch migration mechanism provides a novel idea for realizing the assembly of nanostructures, simply by attaching structures such as tiles, proteins, quantum dots, etc. to the ends of the four-way branches.

Stimuli-Responsive Three-Dimensional DNA Nanomachines Engineered by Controlling Dynamic Interactions at Biomolecule-Nanoparticle Interfaces

Stimuli-responsive nanomachines are attractive tools for biosensing, imaging, and drug delivery. Herein, we demonstrate that the orientation of macromolecules and subsequent dynamic interactions at the biomolecule-nanoparticle (bio-nano) interfaces can be rationally controlled to engineer stimuli-responsive DNA nanomachines. The success of this design principle was demonstrated by engineering a series of antibody-responsive DNA walkers capable of moving persistently on a three-dimensional track made of DNA functionalized gold nanoparticles. We show that drastically different responses to antibodies could be achieved using DNA walkers of identical sequences but with varying number or sites of modifications. We also show that multiple interfacial factors could be combined to engineer stimuli-responsive DNA nanomachines with high sensitivity and modularity. The potential of our strategy for practical uses was finally demonstrated for the amplified detection of antibodies and small molecules in both buffer and human serum samples. Unlike many DNA-based nanomachines, the performance of which could be significantly hindered by the matrix of serum, our system shows a matrix-enhanced sensitivity as a result of the engineering approach at the bio-nano interface.

Single antibody detection in a DNA origami nanoantenna

DNA nanotechnology offers new biosensing approaches by templating different sensor and transducer components. Here, we combine DNA origami nanoantennas with label-free antibody detection by incorporating a nanoswitch in the plasmonic hotspot of the nanoantenna. The nanoswitch contains two antigens that are displaced by antibody binding, thereby eliciting a fluorescent signal. Single-antibody detection is demonstrated with a DNA origami integrated anti-digoxigenin antibody nanoswitch. In combination with the nanoantenna, the signal generated by the antibody is additionally amplified. This allows the detection of single antibodies on a portable smartphone microscope. Overall, fluorescence-enhanced antibody detection in DNA origami nanoantennas shows that fluorescence-enhanced biosensing can be expanded beyond the scope of the nucleic acids realm.

•

Single-antibody detection with nanoswitch sensor incorporated in DNA origami structures

•

Fluorescence-enhanced single antibody detection in DNA origami nanoantennas

•

Detection of single antibodies on a portable smartphone microscope

DNA-based ribonuclease detection assays

Ribonucleases are useful as biomarkers and can be the source of contamination in laboratory samples, making ribonuclease detection assays important in life sciences research. With recent developments in DNA-based biosensing, several new techniques are being developed to detect ribonucleases. This review discusses some of these methods, specifically those that utilize G-quadruplex DNA structures, DNA-nanoparticle conjugates and DNA nanostructures, and the advantages and challenges associated with them.

Antibody-Responsive Ratiometric Fluorescence Biosensing of Biemissive Silver Nanoclusters Wrapped in Switchable DNA Tweezers

Exploring the ratiometric fluorescence biosensing of DNA-templated biemissive silver nanoclusters (AgNCs) is significant in bioanalysis, yet the design of a stimuli-responsive DNA device is a challenge. Herein, using the anti-digoxin antibody (anti-Dig) with two identical binding sites as a model, a tweezer-like DNA architecture is assembled to populate fluorescent green- and red-AgNCs (g-AgNCs and r-AgNCs), aiming to produce a ratio signal via specific recognition of anti-Dig with two haptens (DigH). To this end, four DNA probes are programmed, including a reporter strand (RS) dually ended with a g-/r-AgNC template sequence, an enhancer strand (ES) tethering two same G-rich tails (G18), a capture strand (CS) labeled with DigH at two ends, and a help strand (HS). Initially, both g-AgNCs and r-AgNCs wrapped in the intact RS are nonfluorescent, whereas the base pairing between RS, ES, CS, and HS resulted in the construction of DNA mechanical tweezers with two symmetric arms hinged by a rigid "fulcrum", in which g-AgNCs are lighted up due to G18 proximity ("green-on"), and r-AgNCs away from G18 are still dark ("red-off"). When two DigHs in proximity recognize and bind anti-Dig, the conformation switch of these tweezers resultantly occurs, taking g-AgNCs away from G18 for "green-off" and bringing r-AgNCs close to G18 for "red-on". As such, the ratiometric fluorescence of r-AgNCs versus g-AgNCs is generated in response to anti-Dig, achieving reliable quantization with a limit of detection at the picomolar level. Based on the fast stimulated switch of unique DNA tweezers, our ratiometric strategy of dual-emitting AgNCs would provide a new avenue for a variety of bioassays.

Antibody-powered DNA switches to initiate the hybridization chain reaction for the amplified fluorescence immunoassay

Designing antibody-powered DNA nanodevice switches is crucial and fascinating to perform a variety of functions in response to specific antibodies as regulatory inputs, achieving highly sensitive detection by integration with simple amplified methods. In this work, we report a unique DNA-based conformational switch, powered by a targeted anti-digoxin mouse monoclonal antibody (anti-Dig) as a model, to rationally initiate the hybridization chain reaction (HCR) for enzyme-free signal amplification. As a proof-of-concept, both a fluorophore Cy3-labeled reporter hairpin (RH) in the 3' terminus and a single-stranded helper DNA (HS) were individually hybridized with a recognition single-stranded DNA (RS) modified with Dig hapten, while the unpaired loop of RH was hybridized with the exposed 3'-toehold of HS, isothermally self-assembling an intermediate metastable DNA structure. The introduction of target anti-Dig drove the concurrent conjugation with two tethered Dig haptens, powering the directional switch of this DNA structure into a stable conformation. In this case, the unlocked 3'-stem of RH was implemented to unfold the 5'-stem of the BHQ-2-labeled quench hairpin (QH), rationally initiating the HCR between them by the overlapping complementary hybridization. As a result, numerous pairs of Cy3 and BHQ-2 in the formed long double helix were located in spatial proximity. In response to this, the significant quenching of the fluorescence intensity of Cy3 by BHQ-2 was dependent on the variable concentration of anti-Dig, achieving a highly sensitive quantification down to the picomolar level based on a simplified protocol integrated with enzyme-free amplification.

Static quenching upon adduct formation: a treatment without shortcuts and approximations

Luminescence quenching is a process exploited in transversal applications in science and technology and it has been studied for a long time. The luminescence quenching mechanisms are typically distinguished in dynamic (collisional) and static, which can require different quantitative treatments. This is particularly important - and finds broad and interdisciplinary application - when the static quenching is caused by the formation of an adduct between the luminophore - at the ground state - and the quencher. Due to its nature, this case should be treated starting from the well-known law of mass action although, in specific conditions, general equations can be conveniently reduced to simpler ones. A proper application of simplified equations, though, can be tricky, with frequent oversimplifications taking to severe errors in the interpretation of the photophysical data. This tutorial review aims to (i) identify the precise working conditions for the application of the simplified equations of static quenching and to (ii) provide general equations for broadest versatility and applicability. The latter equations can be used even beyond the sole case of pure quenching, i.e., in the cases of partial quenching and even luminescence turn-on. Finally, we illustrate different applications of the equations via a critical discussion of examples in the field of sensing, supramolecular chemistry and nanotechnology.

Nucleic Acid Tests for Clinical Translation

Nucleic acids, including deoxyribonucleic acid (DNA) and ribonucleic acid (RNA), are natural biopolymers composed of nucleotides that store, transmit, and express genetic information. Overexpressed or underexpressed as well as mutated nucleic acids have been implicated in many diseases. Therefore, nucleic acid tests (NATs) are extremely important. Inspired by intracellular DNA replication and RNA transcription, in vitro NATs have been extensively developed to improve the detection specificity, sensitivity, and simplicity. The principles of NATs can be in general classified into three categories: nucleic acid hybridization, thermal-cycle or isothermal amplification, and signal amplification. Driven by pressing needs in clinical diagnosis and prevention of infectious diseases, NATs have evolved to be a rapidly advancing field. During the past ten years, an explosive increase of research interest in both basic research and clinical translation has been witnessed. In this review, we aim to provide comprehensive coverage of the progress to analyze nucleic acids, use nucleic acids as recognition probes, construct detection devices based on nucleic acids, and utilize nucleic acids in clinical diagnosis and other important fields. We also discuss the new frontiers in the field and the challenges to be addressed.

DNA-Based Nanoswitches: Insights into Electrochemiluminescence Signal Enhancement

Electrochemiluminescence (ECL) is a powerful transduction technique that has rapidly gained importance as a powerful analytical technique. Since ECL is a surface-confined process, a comprehensive understanding of the generation of ECL signal at a nanometric distance from the electrode could lead to several highly promising applications. In this work, we explored the mechanism underlying ECL signal generation on the nanoscale using luminophore-reporter-modified DNA-based nanoswitches (i.e., molecular beacon) with different stem stabilities. ECL is generated according to the "oxidative-reduction" strategy using tri-n-propylamine (TPrA) as a coreactant and Ru(bpy)₃²⁺ as a luminophore. Our findings suggest that by tuning the stem stability of DNA nanoswitches we can activate different ECL mechanisms (direct and remote) and, under specific conditions, a "digital-like" association curve, i.e., with an extremely steep transition after the addition of increasing concentrations of DNA target, a large signal variation, and low preliminary analytical performance (LOD 22 nM for 1GC DNA-nanoswtich and 16 nM for 5GC DNA-nanoswitch). In particular, we were able to achieve higher signal gain (i.e., 10 times) with respect to the standard "signal-off" electrochemical readout. We demonstrated the copresence of two different ECL generation mechanisms on the nanoscale that open the way for the design of customized DNA devices for highly efficient dual-signal-output ratiometric-like ECL systems.

Novel nucleic acid origami structures and conventional molecular beacon-based platforms: a comparison in biosensing applications

Nucleic acid nanotechnology designs and develops synthetic nucleic acid strands to fabricate nanosized functional systems. Structural properties and the conformational polymorphism of nucleic acid sequences are inherent characteristics that make nucleic acid nanostructures attractive systems in biosensing. This review critically discusses recent advances in biosensing derived from molecular beacon and DNA origami structures. Molecular beacons belong to a conventional class of nucleic acid structures used in biosensing, whereas DNA origami nanostructures are fabricated by fully exploiting possibilities offered by nucleic acid nanotechnology. We present nucleic acid scaffolds divided into conventional hairpin molecular beacons and DNA origami, and discuss some relevant examples by focusing on peculiar aspects exploited in biosensing applications. We also critically evaluate analytical uses of the synthetic nucleic acid structures in biosensing to point out similarities and differences between traditional hairpin nucleic acid sequences and DNA origami.

Programmable DNA Nanodevices for Applications in Neuroscience

The broad area of neuroscience has witnessed an increasing exploitation of a variety of synthetic biomaterials with controlled nanosized features. Different bionanomaterials offer very peculiar physicochemical and biochemcial properties contributing to the development of novel imaging devices toward imaging the brain, or as smartly functionalized scaffolds, or diverse tools contributing toward a better understanding of nervous tissue and its functions. DNA nanotechnology-based devices and scaffolds have emerged as ideal materials for cellular and tissue engineering due to their very biocompatible properties, robust adaptation with diverse biological systems, and biosafety in terms of reduced immune response triggering. Here we present technologies with respect to DNA nanodevices that are designed to better interact with nervous systems like neural cells, advanced molecular imaging technologies for imaging brain, biomaterials in neural regeneration, neuroprotection, and targeted delivery of drugs and small molecules across the blood-brain barrier. Along with comments regarding the progress of DNA nanotechnology in neuroscience, we also present a perspective on challenges and opportunities for applying DNA nanotechnology in applications pertaining to neurosciences.

Orthogonal Control of DNA Nanoswitches with Mixed Physical and Biochemical Cues

Nanoscale devices that can respond to external stimuli have potential applications in drug delivery, biosensing, and molecular computation. Construction using DNA has provided many such devices that can respond to cues such as nucleic acids, proteins, pH, light, or temperature. However, simultaneous control of molecular devices is still limited. Here, we present orthogonal control of DNA nanoswitches using physical (light) and biochemical (enzyme and nucleic acid) triggers. Each one of these triggers controls the reconfiguration of specific nanoswitches from locked to open states within a mixture and can be used in parallel to control a combination of nanoswitches. Such dynamic control over nanoscale devices allows the incorporation of tunable portions within larger structures as well as spatiotemporal control of DNA nanostructures.

Direct Kinetic Fingerprinting for High-Accuracy Single-Molecule Counting of Diverse Disease Biomarkers

Methods for detecting and quantifying disease biomarkers in biofluids with high specificity and sensitivity play a pivotal role in enabling clinical diagnostics, including point-of-care tests. The most widely used molecular biomarkers include proteins, nucleic acids, hormones, metabolites, and other small molecules. While numerous methods have been developed for analyzing biomarkers, most techniques are challenging to implement for clinical use due to insufficient analytical performance, high cost, and/or other practical shortcomings. For instance, the detection of cell-free nucleic acid (cfNA) biomarkers by digital PCR and next-generation sequencing (NGS) requires time-consuming nucleic acid extraction steps, often introduces enzymatic amplification bias, and can be costly when high specificity is required. While several amplification-free methods for detecting cfNAs have been reported, these techniques generally suffer from low specificity and sensitivity. Meanwhile, the quantification of protein biomarkers is generally performed using immunoassays such as enzyme-linked immunosorbent assay (ELISA); the analytical performance of these methods is often limited by the availability of antibodies with high affinity and specificity as well as the significant nonspecific binding of antibodies to assay surfaces. To address the drawbacks of existing biomarker detection methods and establish a universal diagnostics platform capable of detecting different types of analytes, we have developed an amplification-free approach, named single-molecule recognition through equilibrium Poisson sampling (SiMREPS), for the detection of diverse biomarkers with arbitrarily high specificity and single-molecule sensitivity. SiMREPS utilizes the transient, reversible binding of fluorescent detection probes to immobilized target molecules to generate kinetic fingerprints that are detected by single-molecule fluorescence microscopy. The analysis of these kinetic fingerprints enables nearly perfect discrimination between specific binding to target molecules and any nonspecific binding. Early proof-of-concept studies demonstrated the in vitro detection of miRNAs with a limit of detection (LOD) of approximately 1 fM and >500-fold selectivity for single-nucleotide polymorphisms. The SiMREPS approach was subsequently expanded to the detection of rare mutant DNA alleles from biofluids at mutant allele fractions of as low as 1 in 1 million, corresponding to a specificity of >99.99999%. Recently, SiMREPS was generalized to protein quantification using dynamically binding antibody probes, permitting LODs in the low-femtomolar to attomolar range. Finally, SiMREPS has been demonstrated to be suitable for the in situ detection of miRNAs in cultured cells, the quantification of small-molecule toxins and drugs, and the monitoring of telomerase activity at the single-molecule level. In this Account, we discuss the principles of SiMREPS for the highly specific and sensitive detection of molecular analytes, including considerations for assay design. We discuss the generality of SiMREPS for the detection of very disparate analytes and provide an overview of data processing methods, including the expansion of the dynamic range using super-resolution analysis and the improvement of performance using deep learning algorithms. Finally, we describe current challenges, opportunities, and future directions for the SiMREPS approach.

Nuclease resistance of DNA nanostructures

DNA nanotechnology has progressed from proof-of-concept demonstrations of structural design towards application-oriented research. As a natural material with excellent self-assembling properties, DNA is an indomitable choice for various biological applications, including biosensing, cell modulation, bioimaging and drug delivery. However, a major impediment to the use of DNA nanostructures in biological applications is their susceptibility to attack by nucleases present in the physiological environment. Although several DNA nanostructures show enhanced resistance to nuclease attack compared with duplexes and plasmid DNA, this may be inadequate for practical application. Recently, several strategies have been developed to increase the nuclease resistance of DNA nanostructures while retaining their functions, and the stability of various DNA nanostructures has been studied in biological fluids, such as serum, urine and cell lysates. This Review discusses the approaches used to modulate nuclease resistance in DNA nanostructures and provides an overview of the techniques employed to evaluate resistance to degradation and quantify stability.

An SPR investigation into the therapeutic drug monitoring of the anticancer drug imatinib with selective aptamers operating in human plasma

An ss-DNA aptamer-based biosensor was devised to detect the anticancer drug imatinib by means of surface plasmon resonance.

Rapid, Cost-Effective Peptide/Nucleic Acid-Based Platform for Therapeutic Antibody Monitoring in Clinical Samples

We demonstrate here a homogeneous assay, named NanoHybrid, for monoclonal antibody quantification directly in serum samples in a single-step format. NanoHybrid is composed of both synthetic peptide nucleic acids (PNAs) and nucleic acid strands conjugated to recognition elements and optical labels and is designed to allow fast fluorescence quantification of a therapeutic antibody. More specifically, we have characterized our analytical assay for the detection of trastuzumab (Herceptin), a monoclonal antibody (mAb) drug used for breast cancer treatment and for tumors overexpressing the HER2/neu protein. We show here that NanoHybrid is capable of performing fast drug quantification directly in blood serum. The results obtained with a pool of samples from breast cancer patients under trastuzumab treatment are compared with CE-IVD ELISA (enzyme-linked immunosorbent assay) showing a good agreement (Cohen's K = 0.729). Due to the modular nature of the NanoHybrid platform, this technology can be programmed to potentially detect and quantify any antibody for which a high-affinity recognition element has been characterized. We envision the application of NanoHybrid in a point-of-care (POC) drug monitoring system based on disposable kits for therapeutic drug management.

Reduction chemistry-assisted nanopore determination method for immunoglobulin isotypes

Immunoglobulins can bind to an unlimited array of foreign antigens presented to the immune system. Among those isotypes, IgG and IgM play crucial roles in initial immune defense associated with innate immunity factors. Hence, the determination of IgG and IgM deficiencies or varying concentrations is widely used as a diagnostic indicator for immune deficiency disorders. Herein, we report a reduction chemistry-assisted nanopore method for IgG and IgM determination. TCEP (tris(2-carboxyethyl)phosphine) was used to cleave Ig proteins in fragments by means of disulfide bond reduction under different experimental conditions. This strategy enabled the observation of distinguishable current signals afforded by separated polypeptide fragments in an αHL nanopore. Together with molecular dynamics (MD) simulation results, highly effective electrostatic potentials and H-bonds, the dominant factors for these current signals, facilitated the capture of Ig fragments in an α-HL nanopore. More importantly, the signature signals were applicable for differentiating between IgG and IgM in blood serum without any problems of protein adsorption and clogging in the nanopore sensing. Furthermore, with comparative sensing sensitivity and selectivity, it is concluded that our method is a label-free single-molecule approach to measuring disease states that present as a result of the absence or over presence of immunoglobulin isotypes.

Direct kinetic fingerprinting and digital counting of single protein molecules

The sensitive and accurate quantification of protein biomarkers plays important roles in clinical diagnostics and biomedical research. Sandwich ELISA and its variants accomplish the capture and detection of a target protein via two antibodies that tightly bind at least two distinct epitopes of the same antigen and have been the gold standard for sensitive protein quantitation for decades. However, existing antibody-based assays cannot distinguish between signal arising from specific binding to the protein of interest and nonspecific binding to assay surfaces or matrix components, resulting in significant background signal even in the absence of the analyte. As a result, they generally do not achieve single-molecule sensitivity, and they require two high-affinity antibodies as well as stringent washing to maximize sensitivity and reproducibility. Here, we show that surface capture with a high-affinity antibody combined with kinetic fingerprinting using a dynamically binding, low-affinity fluorescent antibody fragment differentiates between specific and nonspecific binding at the single-molecule level, permitting the direct, digital counting of single protein molecules with femtomolar-to-attomolar limits of detection (LODs). We apply this approach to four exemplary antigens spiked into serum, demonstrating LODs 55- to 383-fold lower than commercially available ELISA. As a real-world application, we establish that endogenous interleukin-6 (IL-6) can be quantified in 2-µL serum samples from chimeric antigen receptor T cell (CAR-T cell) therapy patients without washing away excess serum or detection probes, as is required in ELISA-based approaches. This kinetic fingerprinting thus exhibits great potential for the ultrasensitive, rapid, and streamlined detection of many clinically relevant proteins.

Protein-Controlled Actuation of Dynamic Nucleic Acid Networks by Using Synthetic DNA Translators*

Integrating dynamic DNA nanotechnology with protein-controlled actuation will expand our ability to process molecular information. We have developed a strategy to actuate strand displacement reactions using DNA-binding proteins by engineering synthetic DNA translators that convert specific protein-binding events into trigger inputs through a programmed conformational change. We have constructed synthetic DNA networks responsive to two different DNA-binding proteins, TATA-binding protein and Myc-Max, and demonstrated multi-input activation of strand displacement reactions. We achieved protein-controlled regulation of a synthetic RNA and of an enzyme through artificial DNA-based communication, showing the potential of our molecular system in performing further programmable tasks.

Dual Triple Helix-Aptamer Probes for Mix-and-Read Detecting Antibiotics in Fish and Milk

Antibiotic abuse in agricultural products leads to serious food safety issues. To this end, we proposed a mix-and-read and enzyme-free amplified assay for antibiotics based on a dual triple helix-aptamer probe, potentially applicable for on-site monitoring of antibiotic residues. A dual triple helix-aptamer probe can leverage the response toward target molecules without enzyme-based amplification, rendering it sensitive and robust for profiling target molecules. The proposed assay allowed mix-and-read detection of chloramphenicol with a detection limit of 0.18 nM. Besides, it accommodated for specifically resolving chloramphenicol among other antibiotics. Chloramphenicol residual in aquatic products in fish and milk can be precisely determined. Thus, the aptamer probe deems to enrich the toolbox for managing antibiotic use.

Glycoform Differentiation by a Targeted, Self-Assembled, Pattern-Generating Protein Surface Sensor

A method for generating targeted, pattern-generating, protein surface sensors via the self-assembly of modified oligodeoxynucleotides (ODNs) is described. The simplicity by which these systems can be created enabled the development of a sensor that can straightforwardly discriminate between distinct glycoform populations. By using this sensor to identify glycosylation states of a therapeutic protein, we demonstrate the diagnostic potential of this approach as well as the feasibility of integrating a wealth of supramolecular receptors and sensors into higher-order molecular analytical devices with advanced properties. For example, the facile device integration was used to attach the well-known anthracene-boronic acid (An-BA) probe to a biomimetic DNA scaffold and consequently, to use the unique photophysical properties of An-BA to improve glycoform differentiation. In addition, the noncovalent assembly enabled us to modify the sensor with a trinitrilotriacetic acid (tri-NTA)-Ni²⁺ complex, which endows it with selectivity toward a hexa-histidine tag (His-tag). The selective responses of the system to diverse His-tag-labeled proteins further demonstrate the potential applicability of such sensors and validate the mechanism underlying their function.

Robotic DNA Nanostructures

Over the past decade, DNA nanotechnology has spawned a broad variety of functional nanostructures tailored toward the enabled state at which applications are coming increasingly in view. One of the branches of these applications is in synthetic biology, where the intrinsic programmability of the DNA nanostructures may pave the way for smart task-specific molecular robotics. In brief, the synthesis of the user-defined artificial DNA nano-objects is based on employing DNA molecules with custom lengths and sequences as building materials that predictably assemble together by obeying Watson-Crick base pairing rules. The general workflow of creating DNA nanoshapes is getting more and more straightforward, and some objects can be designed automatically from the top down. The versatile DNA nano-objects can serve as synthetic tools at the interface with biology, for example, in therapeutics and diagnostics as dynamic logic-gated nanopills, light-, pH-, and thermally driven devices. Such diverse apparatuses can also serve as optical polarizers, sensors and capsules, autonomous cargo-sorting robots, rotary machines, precision measurement tools, as well as electric and magnetic-field directed robotic arms. In this review, we summarize the recent progress in robotic DNA nanostructures, mechanics, and their various implementations.

Programming DNA-Based Systems through Effective Molarity Enforced by Biomolecular Confinement

The fundamental concept of effective molarity is observed in a variety of biological processes, such as protein compartmentalization within organelles, membrane localization and signaling paths. To control molecular encountering and promote effective interactions, nature places biomolecules in specific sites inside the cell in order to generate a high, localized concentration different from the bulk concentration. Inspired by this mechanism, scientists have artificially recreated in the lab the same strategy to actuate and control artificial DNA-based functional systems. Here, it is discussed how harnessing effective molarity has led to the development of a number of proximity-induced strategies, with applications ranging from DNA-templated organic chemistry and catalysis, to biosensing and protein-supported DNA assembly.

Processing DNA-Based Molecular Signals into Graphical Displays

DNA is now well-established as a nanoscale building material with applications in fields such as biosensing and molecular computation. Molecular processes such as logic gates, nucleic acid circuits, and multiplexed detection have used different readout strategies to measure the output signal. In biosensing, this output can be the diagnosis of a disease biomarker, whereas in molecular computation, the output can be the result of a mathematical operation carried out using DNA. Recent developments have shown that the output of such processes can be displayed graphically as a macroscopic symbol or an alphanumeric character on multiwell plates, microarray chips, gels, lateral flow devices, and DNA origami surfaces. This review discusses the concepts behind such graphical readouts of molecular events, available display platforms, and the advantages and challenges in adapting such methods for practical use. Graphical display systems have the potential to be used in the creation of intelligent computing and sensing devices by which nanoscale binding events are translated into macroscopic visual readouts.