Turn-On Mode Fluorescence Switch by Using Negative Photochromic Imidazole Dimer

Optical Phenomena in Molecule-Based Magnetic Materials

Since the last century, we have witnessed the development of molecular magnetism which deals with magnetic materials based on molecular species, i.e., organic radicals and metal complexes. Among them, the broadest attention was devoted to molecule-based ferro-/ferrimagnets, spin transition materials, including those exploring electron transfer, molecular nanomagnets, such as single-molecule magnets (SMMs), molecular qubits, and stimuli-responsive magnetic materials. Their physical properties open the application horizons in sensors, data storage, spintronics, and quantum computation. It was found that various optical phenomena, such as thermochromism, photoswitching of magnetic and optical characteristics, luminescence, nonlinear optical and chiroptical effects, as well as optical responsivity to external stimuli, can be implemented into molecule-based magnetic materials. Moreover, the fruitful interactions of these optical effects with magnetism in molecule-based materials can provide new physical cross-effects and multifunctionality, enriching the applications in optical, electronic, and magnetic devices. This Review aims to show the scope of optical phenomena generated in molecule-based magnetic materials, including the recent advances in such areas as high-temperature photomagnetism, optical thermometry utilizing SMMs, optical addressability of molecular qubits, magneto-chiral dichroism, and opto-magneto-electric multifunctionality. These findings are discussed in the context of the types of optical phenomena accessible for various classes of molecule-based magnetic materials.

Pyrene Functionalized Norbornadiene-Quadricyclane Fluorescent Photoswitches: Characterization of their Spectral Properties and Application in Imaging of Amyloid Beta Plaques

This study presents the synthesis and characterization of two fluorescent norbornadiene (NBD) photoswitches, each incorporating two conjugated pyrene units. Expanding on the limited repertoire of reported photoswitchable fluorescent NBDs, we explore their properties with a focus on applications in bioimaging of amyloid beta (Aβ) plaques. While the fluorescence emission of the NBD decreases upon photoisomerization, aligning with what has been previously reported, for the first time we observed luminescence after irradiation of the quadricyclane (QC) isomer. We deduce how the observed emission is induced by photoisomerization to the excited state of the parent isomer (NBD) which is then the emitting species. Thorough characterizations including NMR, UV-Vis, fluorescence, X-ray structural analysis and density functional theory (DFT) calculations provide a comprehensive understanding of these systems. Notably, one NBD-QC system exhibits exceptional durability. Additionally, these molecules serve as effective fluorescent stains targeting Aβ plaques in situ, with observed NBD/QC switching within the plaques. Molecular docking simulations explore NBD interactions with amyloid, unveiling novel binding modes. These insights mark a crucial advancement in the comprehension and design of future photochromic NBDs for bioimaging applications and beyond, emphasizing their potential in studying and addressing protein aggregates.

Reversible open-closed conformational switching of nano-size metalloporphyrin dimers triggered by light and temperature

The current work demonstrates the reversible control of substantial molecular motion in 'nano-sized' molecules, where two structural isomers can 'open' and 'close' their cavities in response to light or heat. The isomers differ widely in their photophysical properties, including colour, polarity, two-photon absorption and π-conjugation, and can easily be separated through column chromatography and thus have wide applicability.

Geometry-Induced Oligomerization of Fluorine-Substituted Phenylazothiazole Photoswitches

Photoswitches are molecules that can absorb light of specific wavelengths and undergo a reversible transformation between their trans and cis isomeric forms. In phenylazo photoswitches, it is common for the less stable cis (Z) isomer to convert back to the more stable trans (E) isomer either through photochemical or thermal means. In this research, we designed new derivatives of phenylazothiazole (PAT) photoswitches, PAT-Fn, which feature fluorine substituents on their phenyl component. These derivatives can reversibly isomerize under visible light exposure with the enrichment of E and Z isomers at photostationary state (PSS). Surprisingly, we observed an unconventional phenomenon when these PAT-Fn (n≧2) photoswitches were in their cis isomeric state in the absence of light. Instead of the anticipated transformation from cis to trans isomer, these compounds converted to an oligomeric compound. Our detailed experimental investigation and theoretical calculations, indicated the crucial role of fluorine substituents and the distinctive geometric arrangement of the cis isomer in driving the unexpected oligomerization process originating from the cis isomeric state.

Next-Generation 3,3'-AlkoxyBTPs as Complexants for Minor Actinide Separation from Lanthanides: A Comprehensive Separations, Spectroscopic, and DFT Study

Progress toward the closure of the nuclear fuel cycle can be achieved if satisfactory separation strategies for the chemoselective speciation of the trivalent actinides from the lanthanides are realized in a nonproliferative manner. Since Kolarik's initial report on the utility of bis-1,2,4-triazinyl-2,6-pyridines (BTPs) in 1999, a perfect complexant-based, liquid-liquid separation system has yet to be realized. In this report, a comprehensive performance assessment for the separation of 241Am3+ from 154Eu3+ as a model system for spent nuclear fuel using hydrocarbon-actuated alkoxy-BTP complexants is described. These newly discovered complexants realize gains that contemporary aryl-substituted BTPs have yet to achieve, specifically: long-term stability in highly concentrated nitric acid solutions relevant to the low pH of unprocessed spent nuclear fuel, high DAm over DEu in the economical, nonpolar diluent Exxal-8, and the demonstrated capacity to complete the separation cycle with high efficiency by depositing the chelated An3+ to the aqueous layer via decomplexation of the metal-ligand complex. These soft-N-donor BTPs are hypothesized to function as bipolar complexants, effectively traversing the organic/aqueous interface for effective chelation and bound metal/ligand complex solubility. Complexant design, separation assays, spectroscopic analysis, single-crystal X-ray crystallographic data, and DFT calculations are reported.

Development of excitation power-responsive anti-stokes emission wavelength switching and their energy saving induced by localized surface plasmon resonance

We designed an external stimulus-responsive anti-Stokes emission switching using dual-annihilator-based triplet-triplet annihilation upconversion systems. This system, which was constructed by incorporating a palladium porphyrin derivative as a sensitizer and 9,10-diphenylanthracene (DPA) and 9,10-bis(triisopropylsilyl)ethynylanthracene (TIPS) as annihilators into polymer thin films, produced TIPS- and DPA-based anti-Stokes emission under low and high excitation powers, respectively. The mechanism involves the following: under low excitation power, triplet energy transfer from triplet-excited PdOEP to DPA is induced, followed by relay to TIPS. This results in the generation of triplet-excited TIPS, and the subsequent triplet-triplet annihilation between them produces TIPS-based anti-Stokes emission. Conversely, under high excitation power, the high-density triplet-excited DPA, generated through triplet energy transfer from PdOEP, undergoes triplet-triplet annihilation among themselves, resulting in the generation of DPA-based anti-Stokes emission. Additionally, we achieved energy savings by reducing the required excitation power for switching through the utilization of plasmonic metal nanoparticles. The strong local electromagnetic fields associated with the localized surface plasmon resonance of metal nanoparticles enhance the photoexcitation efficiency of PdOEP, subsequently increasing the density of triplet-excited DPA. As a result, anti-Stokes emission switching becomes feasible at lower excitation powers.

Investigating the Properties of Triangle Terthiophene and Triphenylamine Configured Propeller-like Photochromic Dye with Ethyne Bridge

Synthesis-oriented design led us to the construction of a propeller-like dye, containing the triangle terthiophene and triphenylamine units. It reveals typical photochromic properties with alternated UV (390 nm) and visible light (˃ 440 nm) irradiation and the dye solution (in THF) color was also toggled between yellow-green and colorless. A new absorption band was observed in visible region (415-600 nm). Additionally, the photochromic dye was highly emissive with the absolute quantum yield being 0.27. After UV light irradiation, the emission was quenched significantly (Φ = 0.08) at photo-stationary state, and thus establishing a switchable emission "on-off" system by alternated UV/visible light irradiation cycle. Detailed structural analysis was carried out based on the optimized dye structure. Both the antiparallel conformation and the distance of reactive carbon atoms (< 4.2 Å) led to the smoothly photochromic behavior.

From Visible to Near-Infrared Light-Triggered Photochromism: Negative Photochromism

Photochromic compounds, whose key molecular properties can be effectively modulated by light irradiation, have attracted significant attention for their potential applications in various research fields. The restriction of photoisomerization coloration induced by ultraviolet light limits their applications in the biomedical field and some other fields. Negative photochromism, wherein a relatively stable colored isomer transforms to a colorless metastable isomer under low-energy light irradiation, offers advantages in applications within materials science and life science. This review provides a summary of negatively photochromic compounds based on different molecular skeletons. Their corresponding design strategies and photochromic properties are presented to provide practical guidelines for future investigations. Negatively photochromic compounds can effectively expand the range of photochromic switches for future applications, offering unique properties such as responsiveness to visible to near-infrared light.

Visible light-responsive materials: the (photo)chemistry and applications of donor-acceptor Stenhouse adducts in polymer science

Donor-acceptor Stenhouse adduct (DASA) photoswitches have gained a lot of attention since their discovery in 2014. Their negative photochromism, visible light absorbance, synthetic tunability, and the large property changes between their photoisomers make them attractive candidates over other commonly used photoswitches for use in materials with responsive or adaptive properties. The development of such materials and their translation into advanced technologies continues to widely impact forefront materials research, and DASAs have thus attracted considerable interest in the field of visible-light responsive molecular switches and dynamic materials. Despite this interest, there have been challenges in understanding their complex behavior in the context of both small molecule studies and materials. Moreover, incorporation of DASAs into polymers can be challenging due to their incompatibility with the conditions for most common polymerization techniques. In this review, therefore, we examine and critically discuss the recent developments and challenges in the field of DASA-containing polymers, aiming at providing a better understanding of the interplay between the properties of both constituents (matrix and photoswitch). The first part summarizes current understanding of DASA design and switching properties. The second section discusses strategies of incorporation of DASAs into polymers, properties of DASA-containing materials, and methods for studying switching of DASAs in materials. We also discuss emerging applications for DASA photoswitches in polymeric materials, ranging from light-responsive drug delivery systems, to photothermal actuators, sensors and photoswitchable surfaces. Last, we summarize the current challenges in the field and venture on the steps required to explore novel systems and expand both the functional properties and the application opportunities of DASA-containing polymers.

Acoustodynamic Covalent Materials Engineering for the Remote Control of Physical Properties Inside Materials

Advances in vat photopolymerization (VP) 3D printing (3DP) technology enable the production of highly precise 3D objects. However, it is a major challenge to create dynamic functionalities and to manipulate the physical properties of the inherently insoluble and infusible cross-linked material generated from VP-3DP without reproduction. The fabrication of light- and high-intensity focused ultrasound (HIFU)-responsive cross-linked polymeric materials linked with hexaarylbiimidazole (HABI) in polymer chains based on VP-3DP is reported here. Although the photochemistry of HABI produces triphenylimidazolyl radicals (TPIRs) during the process of VP-3DP, the orthogonality of the photochemistry of HABI and photopolymerization enables the introduction of reversible cross-links derived from HABIs in the resulting 3D-printed objects. While photostimulation cleaves a covalent bond between two imidazoles in HABI to generate TPIRs only near the surface of the 3D-printed objects, HIFU triggers cleavage in the interior of materials. In addition, HIFU travels beyond an obstacle to induce a response of HABI-embedded cross-linked polymers, which cannot be attainable with photostimulation. The present system would be beneficial for tuning the physical properties and recycling of various polymeric materials, but it will also open the door for pinpoint modification, healing, and reshaping of materials when coupled to various dynamic covalent materials.

Photo-Induced Fluorochromism of a Star-Shaped Photochromic Dye with 2,4-Dimethylthiazole Attaching to Triangle Terthiophene

A photochrmic triangle terthiophene dye with 2,4-dimethylthiazole attached was synthesized and shows regular photochromic properties when irradiated with UV/Vis light alternately. It was found that the attaching of 2,4-dimethylthiazole has a significant effect on both the photochromism and fluorescence of triangle terthiophene. During the photocyclizatioin prcess, not only the color but also the fluorescence of the dye in THF can be toggled between ring-open and ring-closed forms of the dye. Additionally, the absolute quantum yields (AQY) of ring-open and ring-closed forms of the dye (0.32/0.58) were greatly larger than the literature report. Along with the 254 nm light irradiation, the fluorescence color changed from deep blue (428 nm) to sky blue (486 nm) in THF. A fluorochromism cycle could be established based on the UV/visible light irradiation cycle, which provides a strategy for the design of new type fluorescent diarylethene derivatives for biological application.

Ligand-protected nanocluster-mediated photoswitchable fluorescent nanoprobes towards dual-color cellular imaging

Development of robust multi-color photoswitchable fluorescent probes is critical for many optical applications, but it remains a challenge to rationally design these probes. Here, we report a new design of Förster resonance energy transfer-based dual-color photoswitchable fluorescent nanoparticles (DPF NPs) by taking advantage of the distinct properties of ligand-protected gold nanoclusters (AuNCs). Detailed photophysical studies revealed that ultrasmall-sized AuNCs not only act as the FRET donors due to their intrinsic fluorescence properties, but also play a significant role in regulating the photochromic and aggregate properties of spiropyran through ligand-spiropyran interactions. These DPF NPs exhibit a high fluorescence on/off ratio (∼90%) for both green and red fluorescence emission, and good reversibility during cycled photo-stimulation. Cell imaging experiments showed that DPF NPs could specifically accumulate in lipid droplets, and enable photoswitchable dual-color imaging in living cells. Moreover, by labeling mitochondria with a green-emitting marker, we demonstrated that DPF NPs can distinguish different targets based on dynamic and static fluorescence signals at the sub-cellular level in two emission channels reliably. This study provides a new strategy for designing robust photoswitchable fluorescent probes by modulating the properties of photochromic dyes through ligand-protected nanoclusters, which can be generalized for the development of other photoswitch systems towards advanced optical applications.

Photoinduced Aryl Transfer from Imidazolyl-Quinoline π-Conjugated Systems

Aryl transfer between heteroatoms was photochemically available through radical initiation followed by a bimolecular reaction. However, such an excited-state reaction has rarely been reported through a photoinduced intramolecular pathway in the π-conjugated systems. Herein, we found, for the first time, a clean photoinduced intramolecular aryl shift for imidazolyl-quinoline derivatives 2NQ (imidazophenanthrene) and 4NQX (imidazophenanthroline), of which the photoproducts are thermally reversible. Upon light irradiation of the studied compounds in solution, an appreciable blue fluorescence along with a gradual change in color appearance was observed, the photoluminescence and photoconversion quantum yields of which were shown to be competitive in the same excited state. We were able to harness the photoconversion quantum yields of the NQ compounds with facile electronic modifications. These, in combination with time-resolved studies on the NQ compounds, gave an oxygen-insensitive aryl transfer rate within 1-100 ns. The anomalously slow intramolecular reaction rates were further proven to be associated with the ∼5.0 kcal/mol transition free energy. The photoproducts NQ_rs were isolated, identified by X-ray analyses, and also shown to demonstrate anti-Vavilov reverse reactions back to the NQ compounds in the higher-lying excited state. The discovery of photoinduced intramolecular aryl transfer paves a new pathway in the synthetic field, which may also be extended and far-reaching to solar-chemical storage under an appropriate design strategy.

Investigating the Properties of Double Triangle Terthiophene Configured Dumbbell-Like Photochromic Dye with Ethyne and 1,3-Butadiene Bridge

Dumbbell-like photochromic dyes were constructed by incorporation of double triangle terthiophene with ethyne or 1,3-butadiene bridge. Regular photochromic behavior was investigated with alternated UV (365 nm) and Visible light (˃ 400 nm) irradiation. However, the different bridge group leads to distinct difference in their photochromic wavelength. For the ethyne bridged triangle terthiophene (DT1), the photochromic wavelength was observed around 500-700 nm (peak value: 605 nm) and the solution turned to red with 365 nm light irradiation. However, the photochromic wavelength was blue shift to 418-550 nm and the solution was turned to light yellow for 1,3-butadiene bridged dye (DT2). Both of the colored solution can be bleached via visible light irradiation. Additionally, the two dyes in THF were emissive with absolute quantum yield (QY) of 0.36/0.40. Along with the photo-induced photocyclization process, the emissive solution can be effectively quenched at photo-stationary sate (Φ = 0.05/0.04). And emission "on-off" cycle could be established based on the UV/visible light irradiation cycle.

Turn-on stimuli-responsive switch: strategies for activating a new fluorescence channel by pressure

The stimulus-responsive smart switching of aggregation-induced emission (AIE) features has attracted considerable attention in 4D information encryption, optical sensors and biological imaging. Nevertheless, for some AIE-inactive triphenylamine (TPA) derivatives, activating the fluorescence channel of TPA remains a challenge based on their intrinsic molecular configuration. Here, we took a new design strategy for opening a new fluorescence channel and enhancing AIE efficiency for (E)-1-(((4-(diphenylamino)phenyl)imino)methyl)naphthalen-2-ol. The turn-on methodology employed is based on pressure induction. Combining ultrafast and Raman spectra with high-pressure in situ showed that activating the new fluorescence channel stemmed from restraining intramolecular twist rotation. Twisted intramolecular charge transfer (TICT) and intramolecular vibration were restricted, which induced an increase in AIE efficiency. This approach provides a new strategy for the development of stimulus-responsive smart-switch materials.

Bridged-Imidazole Dimer Exhibiting Three-State Negative Photochromism with a Single Photochromic Unit

Photochromic molecules that can exhibit multiple states of photochromism in a single photochromic unit are considered more attractive than traditional bistable photochromic molecules because they can offer more versatility and control in photoresponsive systems. We have synthesized a negative photochromic 1-(1-naphthyl)pyrenyl-bridged imidazole dimer (NPy-ImD) that has three different isomers: a colorless isomer, 6MR, a blue-colored isomer, 5MR-B, and a red-colored isomer, 5MR-R. NPy-ImD can interconvert between these isomers via a short-lived transient biradical, BR, upon photoirradiation. 5MR-R is the most stable isomer, and the energy levels of 6MR, 5MR-B, and BR are relatively close to each other. The colored isomers 5MR-R and 5MR-B are photochemically isomerized to 6MR via the short-lived BR upon irradiation with blue light and red light, respectively. The absorption bands of 5MR-R and 5MR-B are well separated by more than 150 nm, with a small overlap, which means they can be selectively excited with different light sources, visible light for 5MR-R and NIR light for 5MR-B. The colorless isomer 6MR is formed from the short-lived BR through a kinetically controlled reaction. 6MR and 5MR-B can then be converted to the more stable isomer 5MR-R through a thermodynamically controlled reaction, which is facilitated by the thermally accessible intermediate, BR. Notably, 5MR-R photoisomerizes to 6MR when irradiated with CW-UV light, whereas it photoisomerizes to 5MR-B by a two-photon process when irradiated with nanosecond UV laser pulses.

Negative Photochromic 3-Phenylperylenyl-Bridged Imidazole Dimer Offering Quantitative and Selective Bidirectional Photoisomerization with Visible and Near-Infrared Light

Selective bidirectional photoisomerization reactions with high conversion ratios between stable and metastable isomers by irradiation of photochromic molecules with visible light of different wavelengths have been an important issue for many years. For negative photochromic molecules known so far, metastable isomers also absorb UV or visible light in the same region as stable isomers, making it difficult to selectively achieve the reverse reaction by visible-light irradiation. We have demonstrated that the absorption bands of the stable and metastable isomers of 3-phenylperylenyl-bridged imidazole dimer are largely separated by more than 140 nm and that almost quantitative and selective bidirectional photoconversion can be achieved by 660 and 460 nm light. Furthermore, the forward reaction can be achieved completely with near-infrared light of 785 nm.

Morphology-Dependent Aggregation-Induced Emission of Janus Emulsion Surfactants

We report a novel stimuli-responsive fluorescent material platform that relies on an evocation of aggregation-induced emission (AIE) from tetraphenylethylene (TPE)-based surfactants localized at one hemisphere of biphasic micro-scale Janus emulsion droplets. Dynamic alterations in the available interfacial area were evoked through surfactant-induced dynamic changes of the internal droplet morphology that can be modulated as a function of the balance of interfacial tensions of the droplet constituent phases. Thus, by analogy with a Langmuir-Blodgett trough that enables selective concentration of surfactants at a liquid-gas interface, we demonstrate here a method for controllable modulation of the available interfacial area of surfactant-functionalized liquid-liquid interfaces. We show that a morphology-dependent alteration of the interfacial area can be used to evoke an optical signal, by selectively assembling synthesized TPE-based surfactants on the respective droplet interfaces. A trigger-induced increase in the concentration of TPE-based surfactants at the liquid-liquid interfaces results in an evocation of aggregation-induced emission (AIE), inducing an up to 3.9-fold increase in the measured emission intensity of the droplets.

Investigation of Triangle Terthiophene and Hydroxyphenylbenzothiazole Configured Fluorescent Dye with a Triple Bond Bridge

A photochromic dye was constructed by incorporation of a carbon-carbon triple bond spaced triangle terthiophene skeleton and hydroxyphenylbenzothiazole. Regular photochromic behavior was investigated with alternated UV (254 nm) and visible light (≥ 400 nm) irradiation. The color of dye in solution can be cycled between pink and colorless. Additionally, the dye solution strongly fluoresces in THF with the absolute quantum yield (QY) being 0.56. When irradiation with 254 nm light, the emissive solution can be effectively quenched to photo-stationary sate (Φ = 0.05). An emission "on-off" cycle could be established based on the UV/visible light irradiation cycle. The photochromic dye also exhibits good photo- and thermal-stability at room temperature. The emission decay profile indicates typical single component character with the fluorescence lifetime being 6.68 ns. The emission color was determined by the CIE 1931 coordinates of x = 0.14, y = 0.25 in the blue region.

Solvent-Modulated Self-Assembly of Naphthalenediimide-Based Cd(II) Complexes and the Controllable Photochromism via Conformational Isomerization

Rational regulation of the properties of photochromic materials is a challenging and meaningful work. In the present work, NDI-based complexes, namely, [Cd_0.5(NDI)(HBDC)]·H₂O (1) and a series of conformational isomers of {[Cd(NDI)_0.5(BDC)]·MeCN}_n (2), were synthesized by varying the solvent conditions (H₂BDC = terephthalic acid, NDI = N,N'-bis(3-pyridylcarbonylhydrazine)-1,4,5,8-naphthalene diimide). Complex 1 exhibits a 0D mononuclear structure without photochromic behavior due to the bad conjugation of the naphthalene diimide moiety. The conformational isomers of complex 2 manifest a 3D network, showing ultra-fast photo-induced intermolecular electron transfer photochromic behavior under X-ray, UV, and visible light. However, they show different photochromic rates and coloring contrast upon photoirradiation, which originates from their difference in the distances of lone pair(COO)···π(NDI). This was realized via controlling the solvent ratio in the reaction system. In addition, compared to UV/X-ray light, 2 exhibits greater sensitivity to visible light and is an organic-inorganic hybrid material with photomodulated luminescence. Based on the excellent performance, complex 2 can be applied to filter paper, showing potential applications as an inkless printing medium and selective perception of ammonia and amine vapors in the solid state via different visual color changes.

Stepwise Photochromism of Bis(Imidazole Dimer) Bridged by a Sulfur Atom

We report the development of the stepwise photochromic imidazole dimer bridged by a sulfur atom. The one-photon absorption leads to the generation of the colored biradical species, which rapidly recombines to the initial imidazole dimer following first-order reaction kinetics. The further photochemical reaction of the biradical species produces the long-lived colored species, which shows intermolecular dimerization.

Photoactive Anthracene-9,10-dicarboxylic Acid for Tuning of Photochromism in the Cd/Zn Coordination Polymers

Electron transfer photochromic materials with photo-triggered radicals have received huge interest from chemists due to their potentialities in anticounterfeiting, displays, energy conversion, and information storage. However, utilizing the sole carboxylic acid to synthesize novel electron transfer photochromic species is still confronted with huge challenges. Herein, an acentric three-dimensional network Cd₂(ADC)₂(DMF)₂(H₂O) (1; ADC = anthracene-9,10-dicarboxylate; DMF = N,N-dimethylformamide) and a two-dimensional layer Zn(ADC)(H₂O)·DMA·H₂O (2; DMA = N,N-dimethylacetamide) were synthesized and characterized via a photoactive H₂ADC ligand. Both compounds exhibited electron transfer photochromism with the formation of radical photoproducts at the solid state, which was revealed by IR, UV-Vis absorption, photoluminescence and electron spin resonance spectra, and magnetic susceptibility measurements. Density functional theory calculations for 1 showed that the coloration process is a metal-assisted ligand-to-ligand electron transfer process between adjacent ADC molecules, and photogenerated stable radicals are delocalized over the ADC components. Compared with 1, the shorter distances between ADC components via coordination bonds promoted 2 to exhibit a higher coloration efficiency and larger quantity of photogenerated radicals. Furthermore, both compounds showed unexpected radical-actuated photochromism in aqueous solution. This work showed that the carboxylic acid ligands, without viologen acceptors, could construct the electron transfer photochromic complexes, showing a novel kind of ligand for the design of hybrid photochromic materials.

Engineering Photomechanical Molecular Crystals to Achieve Extraordinary Expansion Based on Solid-State [2 + 2] Photocycloaddition

Photomechanical molecular crystals are promising candidates for photoactuators and can potentially be implemented as smart materials in various fields. Here, we synthesized a new molecular crystal, (E)-3-(naphthalen-1-yl)acrylaldehyde malononitrile ((E)-NAAM), that can undergo a solid-state [2 + 2] photocycloaddition reaction under visible light (≥400 nm) illumination. (E)-NAAM microcrystals containing symmetric twinned sealed cavities were prepared using a surfactant-mediated crystal seeded growth method. When exposed to light, the hollow microcrystals exhibited robust photomechanical motions, including bending and dramatic directional expansion of up to 43.1% elongation of the original crystal length before fragmentation due to the photosalient effect. The sealed cavities inside the microcrystals could store different aqueous dye solutions for approximately one month and release the solutions instantly upon light irradiation. A unique slow-fast-slow crystal elongation kinematic process was observed, suggesting significant molecular rearrangements during the illumination period, leading to an average anisotropic crystal elongation of 37.0% (±3.8%). The significant molecular structure and geometry changes accompanying the photocycloaddition reaction, which propels photochemistry to nearly 100% completion, also facilitate photomechanical crystal expansion. Our results provide a possible way to rationally design molecular structures and engineer crystal morphologies to promote more interesting photomechanical behaviors.

s-Tetrazine-Bridged Photochromic Aromatic Framework Material

Integrating fluorescent chromophores in aromatic frameworks could not only prevent aggregation-induced quenching caused by the π-π stacking interaction between the chromophore components but also confer new fluorescence properties. Herein, we report the fabrication of s-tetrazine-bridged aromatic frameworks TzAF by the incorporation of the smallest aromatic fluorophore, s-tetrazine (Tz), into the skeleton of a tetrahedrally connected lattice of aromatic frameworks. The thin films of TzAF coated on silica gel plates were found to exhibit reversible photoswitching fluorescence characteristics under alternate UV and visible-light irradiations with excellent fluorescence stability and high on/off contrast. The repeatable "on/off"fluorescence photoswitchability of the TzAF thin films was mechanistically attributed to light-induced reversible transformation between TzAF's neutral and radical states.

Dark to bright fluorescence state by inter-connecting fluorophores: concentration-dependent blue to NIR emission and live cell imaging applications

Interconnected AIEgens produced concentration dependent tunable emission from blue to NIR.

Novel A–D–A structural imidazole derivatives with charge transfer excited states: importance of molecular structure design in obtaining a “turn-on” type fluorescence probe

Two A–D–A structural triphenylamine-imidazole derivatives were designed to provide a potential strategy for the development of turn-on type Fe3+ fluorescent probes.

A triphenylamine derivative and its Cd(ii) complex with high-contrast mechanochromic luminescence and vapochromism

A triphenylamine derivative and its Cd(ii) complex exhibited predominant mechanochromism and vapochromism with high-contrast color and emission changes.

Reversible On-Off Switching of Excitation-Wavelength-Dependent Emission of a Phosphorescent Soft Salt Based on Platinum(II) Complexes

Excitation-wavelength-dependent (Ex-De) emission materials show excellent potential in diverse advanced photonic areas. Of significant importance is the on-demand regulation of the Ex-De luminescence behavior of these materials, which is previously unprecedented. In this study, we report on a platinum(II) complex-based phosphorescent soft salt S1 ([Pt(tpp)(ed)]⁺[Pt(ftpp)(CN)₂]^- (where ttp = 2-(4-(trifluoromethyl)phenyl)pyridine, ed = ethane-1,2-diamine, and ftpp = 2-(4-fluoro-3-(trifluoromethyl)phenyl)pyridine)) with Ex-De photoluminescence (PL) property. UV-visible absorption and PL spectra of S1 were recorded in DMSO-H₂O mixture (1 × 10^-3 M) with various H₂O fractions to investigate its ground and excited states. Interestingly, the PL spectra of S1 powder show that its maximum emission peak is red-shifted from 595 to 644 nm upon excitation at different wavelengths from 360 to 520 nm, accompanied by an obvious emission color change from yellow-orange to red. Furthermore, confocal laser scanning fluorescence microscopy was employed to determine the PL property of self-assembled uniform S1 nanostructure, and the result shows that the Ex-De emission behavior is absent. On the basis of these results, we conclude the various Pt(II)···Pt(II) distances that exist are the major factor responsible for the properties of the Ex-De PL of S1 powder. Thus, for the first time, reversible on-off switching of Ex-De PL of S1 was achieved by manipulating its Pt(II)···Pt(II) distances through mechanical stress and vapor fuming. Finally, we demonstrate the high-level anticounterfeiting applications via on-demand multicolor displays.

Photoinduced Radical Emission in a Coassembly System

Developing radical emission at ambient conditions is a challenging task since radical species are unstable in air. In the present work, we overcome this challenge by coassembling a series of tricarbonyl-substituted benzene molecules with polyvinyl alcohol (PVA). The strong hydrogen bonds between the guest dopants and the PVA host matrix protect the free radicals of carbonyl compounds after light irradiation, leading to strong solid state free radical emission. Changing temperature and peripheral functional groups of the tricarbonyl-substituted benzenes can influence the intensity of the radical emission. Quantum-chemical calculations predict that such free radical fluorescence originates from anti-Kasha D₂ →D₀ vertical emission by the anion radicals. The photoinduced radical emission by the tricarbonyl-substituted benzenes was successfully utilized for information encryption application.

Electrochemical topological transformation of polysiloxanes

Coupling reactions between polymers are an important class of chemical modifications for changing, enhancing, and tuning the properties of polymeric materials. In particular, transformation of polymer topologies based on efficient, facile and less wasted coupling reactions remains a significant challenge. Here, we report coupling reactions based on electrochemical oxidation of 2,4,5-triphenylimidazole into a 2,4,5-triphenylimidazolyl radical and its spontaneous dimerization into hexaarylbiimidazole. Based on this chemistry, electrochemical topological transformation (ETT) and electrochemical chain extension have been realized with siloxane-based oligomers and polymers. Moreover, this approach enables one step ETT of star-shaped poly(dimethyl siloxane)s (PDMSs) into network PDMSs, running in an ionic liquid solvent and requiring no purification steps.

Double 3-Ethyl-2,4-dimethylpyrrole Configured Fluorescent Dye with Fluorine-Boron as the Bridge

Dipyrrolydiketones BF₂ complex was synthesized and characterized by NMR, HRMS, and single crystal diffraction. In non-polar environment, this BF₂ containing dye emitted bright blue-green fluorescence. No significant spectra shift was observed both in absorption and emission spectra, which indicates the insensitivity of absorption/emission toward environment. The alkyl substituted pyrrole rings lead to its highly emission character in solid state by enhancing the distance between dye molecules. Absolute quantum yields were determined to be 0.51-0.78/0.36 in selected organic medium and solid state, respectively. The emission dynamics was investigated by fluorescence lifetime and both monoexponential and bi-exponential decay was observed.

Tuning the Fluorescence and the Intramolecular Charge Transfer of Phenothiazine Dipolar and Quadrupolar Derivatives by Oxygen Functionalization

A series of new naphthalimide and phenothiazine-based push-pull systems (NPI-PTZ1-5), in which we structurally modulate the oxidation state of the sulfur atom in the thiazine ring, i.e., S(II), S(IV), and S(VI), was designed and synthesized by the Pd-catalyzed Sonogashira cross-coupling reaction. The effect of the sulfur oxidation state on the spectral, photophysical, and electrochemical properties was investigated. The steady-state absorption and emission results show that oxygen functionalization greatly improves the optical (absorption coefficient and fluorescence efficiency) and nonlinear optical (hyperpolarizability) features. The cyclic voltammetry experiments and the quantum mechanical calculations suggest that phenothiazine is a stronger electron donor unit relative to phenothiazine-5-oxide and phenothiazine-5,5-dioxide, while the naphthalimide is a strong electron acceptor in all cases. The advanced ultrafast spectroscopic measurements, transient absorption, and broadband fluorescence up conversion give insight into the mechanism of photoinduced intramolecular charge transfer. A planar intramolecular charge transfer (PICT) and highly fluorescent excited state are populated for the oxygen-functionalized molecules NPI-PTZ2,3 and NPI-PTZ5; on the other hand, a twisted intramolecular charge transfer (TICT) state is produced upon photoexcitation of the oxygen-free derivatives NPI-PTZ1 and NPI-PTZ4, with the fluorescence being thus significantly quenched. These results prove oxygen functionalization as a new effective synthetic strategy to tailor the photophysics of phenothiazine-based organic materials for different optoelectronic applications. While oxygen-functionalized compounds are highly fluorescent and promising active materials for current-to-light conversion in organic light-emitting diode devices, oxygen-free systems show very efficient photoinduced ICT and may be employed for light-to-current conversion in organic photovoltaics.

Multifunctional lanthanide metal-organic framework based ratiometric fluorescence visual detection platform for alkaline phosphatase activity

A turn-on/off ratiometric fluorescence detection platform based on multifunctional lanthanide metal-organic framework (Ln-MOF) and an enzymatic cascade reaction is proposed for alkaline phosphatase (ALP) activity assay. L-phosphotyrosine is hydrolyzed to levodopa (L-dopa) by two steps of enzymatic reaction. L-dopa further reacts with naphthoresorcinol to produce carboxyazamonardine with strong emission at 490 nm. In this process, multifunctional Ln-MOF (Cu@Eu-BTC, BTC is the 1,3,5-benzenetricarboxylic acid) acts not only as a nanozyme to catalyze the fluorogenic reaction between L-dopa and naphthoresorcinol but also as a fluorescence internal standard. The emission of Cu@Eu-BTC at 620 nm is quenched by phosphate anions, and the dual-response ratiometric fluorescence (F₄₉₀/F₆₂₀) can be achieved. A good linear relationship was obtained between Δ(F₄₉₀/F₆₂₀) and ALP activity in the range 0.3-24 U L^-1 with the detection limit of 0.02 U L^-1. In addition, a portable assay tube was designed for visual and point-of-care testing of ALP activity by color variation (ratiometric chromaticity). Both the ratiometric fluorescence detection and the visual detection methods were successfully applied to monitor ALP activity in human serum samples with recovery between 95.5%-109.0% and 94.0%-110.1%, and relative standard deviation less than 8.1% and 9.5%, respectively. As far as we know, this is the first report of ALP activity assay assisted by multifunctional Ln-MOF.Graphical abstract.

Phosphorescent Soft Salt Based on Platinum(II) Complexes: Photophysics, Self-Assembly, Thermochromism, and Anti-counterfeiting Application

A new platinum(II) complex-based soft salt S1, ([Pt(tpp)(ed)]⁺[Pt(pba) (CN)₂]^-) (tpp = 2-(4-(trifluoromethyl)phenyl)pyridine, ed = ethane-1,2-diamine, pba = 4-(2-pyridyl)benzaldehyde), was designed and synthesized. UV-visible absorption and photoluminescence (PL) spectra were studied to elucidate the nature of ground and excited states. The soft salt complex was found to show self-assembly properties with the assistance of electrostatic, π-π stacking, and Pt···Pt interactions, resulting in the remarkable emergence of low-energy absorption and PL bands. Morphological transformation of S1 from undefined nanosized aggregates to nanofibers with different solvent compositions has been demonstrated. Interestingly, a luminescent polymer film was prepared by doping S1 into a polyethylene glycol matrix. The film displayed distinctive emission color change from yellow to red upon heating. Eventually, a high-level anti-counterfeiting application was accomplished using a time-resolved imaging technique based on the thermochromic luminescence property and long emission decay time displayed by S1. It is anticipated that this work can provide deep insights into the control of intermolecular interactions between cationic and anionic complexes of soft salt upon exposure to different external stimuli, resulting in the development of smart luminescent materials for various applications.

Dynamic Covalent Properties of a Novel Indolo[3,2-b]carbazole Diradical

This work describes the synthesis and properties of a dicyanomethylene-substituted indolo[3,2-b]carbazole diradical ICz-CN. This quinoidal system dimerises almost completely to (ICz-CN)₂ , which contains two long C(sp³ )-C(sp³ ) σ-bonds between the dicyanomethylene units. The minor open-shell ICz-CN component in the solid-state mixture was identified by EPR spectroscopy. Cyclic voltammetry and UV-visible spectroelectrochemical data, as well as comparison with reference monomer ICz-Br reveal that the nature of the one-electron oxidation of (ICz-CN)₂ at ambient temperature and ICz-CN at elevated temperature is very similar in all these compounds due to the prevailing localization of their HOMO on the ICz backbone. The peculiar cathodic behaviour reflects the co-existence of (ICz-CN)₂ and ICz-CN. The involvement of the dicyanomethylene groups stabilizes the close-lying LUMO and LUMO+1 of (ICz-CN)₂ and especially ICz-CN compared to ICz-Br, resulting in a distinctive cathodic response at low overpotentials. Differently from neutral ICz-CN, its radical anion and dianion are remarkably stable under ambient conditions. The UV/Vis(-NIR) electronic transitions in parent (ICz-CN)₂ and ICz-CN and their different redox forms have been assigned convincingly with the aid of TD-DFT calculations. The σ-bond in neutral (ICz-CN)₂ is cleaved in solution and in the solid-state upon soft external stimuli (temperature, pressure), showing a strong chromism from light yellow to blue-green. Notably, in the solid state, the monomeric diradical species is predominantly formed under high hydrostatic pressure (>1 GPa).

Dynamic covalent bond constrained ureas for multimode fluorescence switching, thermally induced emission, and chemical signaling cascades

A combination of organic ureas and dynamic covalent chemistry was demonstrated for multistate switching, thermally induced fluorescence, and signaling cascades.

Turning On Solid-State Luminescence by Phototriggered Subtle Molecular Conformation Variations

The development of solid-state intelligent materials, in particular those showing photoresponsive luminescence (PRL), is highly desirable for their cutting-edge applications in sensors, displays, data-storage, and anti-counterfeiting, but is challenging. Few PRL materials are constructed by tethering the classic photochromic systems with newly-emerged solid-state emitters. Selective solid-state photoreactions are demanded to precisely manipulate the luminescent behavior of these emitters, which require dramatic structural change and enough free space, thus limiting the scope of the PRL family. Here, a new PRL material, TPE-4N, that features sensitive and reversible fluorescence switching is reported. The interesting on-off luminescent property of TPE-4N can be facilely tuned through fast phototriggering and thermal annealing. Experimental and theoretical investigations reveal that subtle molecular conformation variation induces the corresponding PRL behavior. The crystalline and amorphous state endows an efficient and weak ISC process, respectively, to turn on and off the emission. The readily fabricated thin-film of TPE-4N exhibits non-destructive PRL behavior with high contrast (>10² ), good light transmittance (>72.3%), and great durability and reversibility under room light for months. Remarkably, a uniform thin-film with such fascinating PRL properties allows high-tech applications in invisible anti-counterfeiting and dynamic optical data storage with micro-resolution.

An AIE-active dual fluorescent switch with negative photochromism for information display and encryption

A negative photochromic molecular switch with AIE and two-color fluorescence conversion properties was synthesized.

Lithium-Ion-Assisted Ultrafast Charging Double-Electrode Smart Windows with Energy Storage and Display Applications

Lithium-ion-assisted ultrafast charging double-electrode smart windows with energy storage and a fluorescence display device (FTO/PB/Ru@SiO2||Ru@SiO2/WO/FTO) based on double electrochromic electrodes (cathode and anode) (FSDECEs) have been designed and fabricated. Here, Prussian blue (PB) and WOred are selected as the electrochromic cathode and anode, respectively. There is a synergistic effect and a large potential difference between the two electrodes. They could be simultaneously and rapidly bleached after being connected with each other. Also, the fluorescence intensity of Ru@SiO2 nanoparticles (NPs) could be regulated by the fluorescence resonance energy transfer effect (FRET). After discharging, the two electrochromic electrodes in the bleached state can be recharged by a Mg-O2 battery with a FeN5 single atomic catalyst to quickly recover the colored state. The double electrochromic electrodes can reversibly alter between coloring and bleaching states only by connecting and disconnecting the electrodes. The fluorescence intensity of FSDECEs can switch between quenching and emission, thus endowing the "on" and "off" functions. The system is concise, environmentally friendly, and easy to operate. The proposed FSDECEs demonstrate high fluorescence contrast, a fast response time, and long-term stability. Such an ingenious design of fluorescence switching based on the double electrochromic electrode in a single cell sheds light on next-generation transparent, portable, and self-powered electrochromic devices and electronic equipment.