Unlocking the Catalytic Potential of TiO2-Supported Pt Single Atoms for the Reverse Water-Gas Shift Reaction by Altering Their Chemical Environment

Contiguous Mo Species and SMSI Effect in MoOx Reinforce Catalytic Performance in Reverse Water-Gas Shift Reaction

Reverse water-gas shift (RWGS) reaction is a promising strategy for the effective valorization of CO2. Because of its endothermic nature, a high-performance catalyst with high durability at high temperatures has been required. Herein, we reveal the dynamic structural changes of platinum-loaded molybdenum suboxide catalysts (Pt/MoOx) in RWGS reaction by multiple operando and in situ measurements, and the catalyst exhibits high activity and CO selectivity, as well as high stability at 500 °C due to the emergence of contiguous Mo species (Mo--Mo) and the strong metal-support interaction (SMSI) effect in MoOx. In situ X-ray absorption fine structure (XAFS) measurements demonstrated that the RWGS reaction is driven by reversible redox of in situ-formed MoOx suboxide, where the contiguous Mo--Mo species in MoOx act as activation sites for CO2. Comprehensive analysis revealed that the MoOx shell surrounding the Pt nanoparticles (NPs) suppresses CO adsorption, thereby resulting in high CO selectivity. Furthermore, the catalyst exhibited a continuous activity increase in the earlier stage of operation at 500 °C, which was attributed to the partial carburization of MoOx during the reaction and the associated increase in the electron density of the Mo species. These findings advance the understanding of RWGS reaction mechanism and suggest innovative strategies for the development of high-performance oxide catalysts with enhanced stability.

The Relationship between the Electronic State of Pt in Pt-Based Nanoparticle Catalysts and Their Electrochemical Catalytic Activity in the Oxidation of Small Organic Compounds

To examine the relationship between the electronic state of platinum (Pt) in Pt-based nanoparticle (NP) catalysts and their catalytic activities in the electrochemical oxidation of methanol (MeOH) and ethanol (EtOH) in alkaline aqueous solutions, Pt-based NP catalysts were synthesized; their electrocatalytic activities were evaluated by rotating electrode techniques; and the electronic state of Pt in Pt-based catalyst surfaces was analyzed via X-ray photoelectron spectroscopy (XPS) and X-ray absorption spectroscopy (XAS). Finally, plots of the electrocatalytic activity vs electronic state of the Pt atoms on the catalyst surface were obtained. The plots exhibited a so-called volcano-type correlation, indicating that there is an optimum electronic state of Pt atoms on the catalyst surface for maximizing the MeOH and EtOH oxidation activities. In addition, the existence of the optimum electronic state was confirmed with adatom-modified Pt electrodes with Pb, Bi, In, Co, and Cu.

Insights from Modulation-Excitation Spectroscopy into the Role of Pt Geometrical Sites in the WGS Reaction

Modulation-excitation spectroscopy coupled to diffuse reflectance infrared Fourier transform spectroscopy (ME-DRIFTS) was explored in this work to obtain valuable insights into the structure-reactivity relations in nanostructured Pt catalysts for the water-gas shift (WGS) reaction. By using model Pt catalytic systems composed of colloidal Pt nanoparticles (NPs) deposited on CeO2 (i.e., reducible) and SiO2 (i.e., nonreducible) supports, it was possible to probe distinct Pt active sites and correlate them to the reaction intermediates and pathways. The analysis revealed that PtNPs/SiO2 favored the participation of well-coordinated (WC) and under-coordinated (UC) Pt sites in the reaction mechanism. In contrast, on PtNPs/CeO2/SiO2, the additional involvement of highly under-coordinated (HUC) Pt sites was also observed. Additionally, both fast and slow formate species were identified as active intermediates on the surface of the PtNPs/CeO2/SiO2 catalyst by ME-DRIFTS. More importantly, the faster reaction pathway was correlated to HUC and UC Pt sites, while the slower route was associated with WC Pt sites. Carbonates, on the other hand, were spectators. ME-DRIFTS experimentally demonstrate differences in the participation of Pt active sites according to the support, the involvement of interfacial sites, and the correlation of Pt local coordination to the surface intermediates in the WGS reaction.

On the Tracks to "Smart" Single-Atom Catalysts

Despite their enormous impact in modern heterogeneous catalysis, single-atom catalysts (SACs) continue to puzzle the catalysis community, which often struggles to draw correct conclusions in SAC-catalyzed experiments. In many cases, the reasons for such an uncertainty originate from the lack of knowledge of the exact single-atom evolution under operative conditions and the fundamental factors controlling the fate of the single atom in relation to the catalytic mechanism. This has led to confusion also about correct definition and terminology, where the coined term single-site catalysts reflects the difficulty in defining the true active species as well as in obtaining long-range ordered homogeneous supports [Chi, S.; et al. J. Catal. 2023, 419, 49-57. DOI: 10.1016/j.jcat.2023.02.003]. Most recent studies have attempted to clarify several of the key aspects that are in play during SAC catalysis. However, one largely overlooked opportunity is to take advantage of all the dynamic phenomena occurring at the single metal site to turn the conventional catalytic sequences into a smart, stimulus-responsive, and controllable evolution of the single atom under operative conditions. Such "smartness" could potentially unleash pathways that mitigate some of the typical drawbacks of SACs, such as selectivity and stability. Here we present our vision on these yet-unexplored opportunities for exploiting the dynamicity of SACs, and we discuss various examples that could be the cornerstones for the advent of a next generation of SACs, that we term here "smart" single-atom catalysts (SSACs). Despite smart-behaving SACs still being far from realization, the clues provided here suggest pathways to achieve this goal.

Black titanium oxide: synthesis, modification, characterization, physiochemical properties, and emerging applications for energy conversion and storage, and environmental sustainability

Since its advent in 2011, black titanium oxide (B-TiOx) has garnered significant attention due to its exceptional optical characteristics, notably its enhanced absorption spectrum ranging from 200 to 2000 nm, in stark contrast to its unmodified counterpart. The escalating urgency to address global climate change has spurred intensified research into this material for sustainable hydrogen production through thermal, photocatalytic, electrocatalytic, or hybrid water-splitting techniques. The rapid advancements in this dynamic field necessitate a comprehensive update. In this review, we endeavor to provide a detailed examination and forward-looking insights into the captivating attributes, synthesis methods, modifications, and characterizations of B-TiOx, as well as a nuanced understanding of its physicochemical properties. We place particular emphasis on the potential integration of B-TiOx into solar and electrochemical energy systems, highlighting its applications in green hydrogen generation, CO2 reduction, and supercapacitor technology, among others. Recent breakthroughs in the structure-property relationship of B-TiOx and its applications, grounded in both theoretical and empirical studies, are underscored. Additionally, we will address the challenges of scaling up B-TiOx production, its long-term stability, and economic viability to align with ambitious future objectives.

The Development of Metal-Free Porous Organic Polymers for Sustainable Carbon Dioxide Photoreduction

A viable tactic to effectively address the climate crisis is the production of renewable fuels via photocatalytic reactions using solar energy and available resources like carbon dioxide (CO2) and water. Organic polymer material-based photocatalytic materials are thought to be one way to convert solar energy into valuable chemicals and other solar fuels. The use of porous organic polymers (POPs) for CO2 fixation and capture and sequestration to produce beneficial compounds to reduce global warming is still receiving a lot of interest. Visible light-responsive organic photopolymers that are functionally designed and include a large number of heteroatoms and an extended π-conjugation allow for the generation of photogenerated charge carriers, improved absorption of visible light, increased charge separation, and decreased charge recombination during photocatalysis. Due to their rigid structure, high surface area, flexible pore size, permanent porosity, and adaptability of the backbone for the intended purpose, POPs have drawn more and more attention. These qualities have been shown to be highly advantageous for numerous sustainable applications. POPs may be broadly categorized as crystalline or amorphous according to how much long-range order they possess. In terms of performance, conducting POPs outperform inorganic semiconductors and typical organic dyes. They are light-harvesting materials with remarkable optical characteristics, photostability, cheap cost, and low cytotoxicity. Through cocatalyst loading and morphological tweaking, this review presents optimization options for POPs preparation techniques. We provide an analysis of the ways in which the preparative techniques will affect the materials' physicochemical characteristics and, consequently, their catalytic activity. An inventory of experimental methods is provided for characterizing POPs' optical, morphological, electrochemical, and catalytic characteristics. The focus of this review is to thoroughly investigate the photochemistry of these polymeric organic photocatalysts with an emphasis on understanding the processes of internal charge generation and transport within POPs. The review covers several types of amorphous POP materials, including those based on conjugated microporous polymers (CMPs), inherent microporosity polymers, hyper-crosslinked polymers, and porous aromatic frameworks. Additionally, common synthetic approaches for these materials are briefly discussed.

Platinum Single-Atom Nests Boost Solar-Driven Photocatalytic Non-Oxidative Coupling of Methane to Ethane

This work introduces a new strategy of a single-atom nest catalyst, whereby several single atoms are positioned closely, aiming to achieve the dual benefits of high atom-utilization efficiency while avoiding the steric hindrance in the coupling reaction. As a proof of concept, Pt single-atom nests, where the adjacent Pt single atoms are approximately 4 Å apart, are precisely engineered on the TiO2 photocatalyst for photocatalytic non-oxidative coupling of methane. The Pt single-atom nest photocatalyst demonstrates remarkable activity, achieving a C2H6 yield and turnover frequency of 251.6 μmol gcat-1 h-1 and 20 h-1, respectively, representing a 3.2-fold improvement compared to the Pt single-atom photocatalyst. Density functional theory calculations reveal that the Pt single-atom nest can significantly decrease the energy barrier for the activation of both CH4 molecules in the coupling process.

Stable and Highly Active Single Atom Configurations for Photocatalytic H2 Generation

The employment of single atoms (SAs), especially Pt SAs, as co-catalysts in photocatalytic H2 generation has gained significant attention due to their exceptional efficiency. However, a major challenge in their application is the light-induced agglomeration of these SAs into less active nanosized particles under photocatalytic conditions. This study addresses the stability and reactivity of Pt SAs on TiO2 surfaces by investigating various post-deposition annealing treatments in air, Ar, and Ar-H2 environments at different temperatures. It is described that annealing in an Ar-H2 atmosphere optimally stabilizes SA configurations, forming stable 2D rafts of assembled SAs ≈0.5-1 nm in diameter. These rafts not only resist light-induced agglomeration but also exhibit significantly enhanced H2 production efficiency. The findings reveal a promising approach to maintaining the high reactivity of Pt SAs while overcoming the critical challenge of their stability under photocatalytic conditions.

Photocatalytic H2 Generation: Controlled and Optimized Dispersion of Single Atom Co-Catalysts Based on Pt-TCPP Planar Adsorption on TiO2

When using single atoms (SAs) as a co-catalyst in photocatalytic H2 generation, achieving a well-dispersed, evenly distributed and adjustable SA surface density on a semiconductor surface is a challenging task. In the present work we use the planar adsorption of tetrakis-(4-carboxyphenyl)-porphyrin (TCPP) and its platinum coordinated analogue, Pt-TCPP, onto anatase TiO2 surfaces to establish a spatially controlled decoration of SAs. We show that the surface Pt SA density can be very well controlled by co-adsorption of Pt-TCPP and TCPP in the planar monolayer regime, and by adjusting the Pt-TCPP to TCPP ratio a desired well dispersed surface density of SAs up to 2.6×105  atoms μm-2 can be established (which is the most effective Pt SA loading for photocatalysis). This distribution and the SA state are maintained after a thermal treatment in air, and an optimized SA density as well as a most active form of Pt for photocatalytic H2 evolution can be established and maintained.

Pt/MnO Interface Induced Defects for High Reverse Water Gas Shift Activity

The implementation of supported metal catalysts heavily relies on the synergistic interactions between metal nanoparticles and the material they are dispersed on. It is clear that interfacial perimeter sites have outstanding skills for turning catalytic reactions over, however, high activity and selectivity of the designed interface-induced metal distortion can also obtain catalysts for the most crucial industrial processes as evidenced in this paper. Herein, the beneficial synergy established between designed Pt nanoparticles and MnO in the course of the reverse water gas shift (RWGS) reaction resulted in a Pt/MnO catalyst having ≈10 times higher activity compared to the reference Pt/SBA-15 catalyst with >99 % CO selectivity. Under activation, a crystal assembly through the metallic Pt (110) and MnO evolved, where the plane distance differences caused a mismatched-row structure in softer Pt nanoparticles, which was identified by microscopic and surface-sensitive spectroscopic characterizations combined with density functional theory simulations. The generated edge dislocations caused the Pt lattice expansion which led to the weakening of the Pt-CO bond. Even though MnO also exhibited an adverse effect on Pt by lowering the number of exposed metal sites, rapid desorption of the linearly adsorbed CO species governed the performance of the Pt/MnO in the RWGS.

Recent Advances in Hydrogenation of CO2 to CO with Heterogeneous Catalysts Through the RWGS Reaction

With the continuous increase in CO2 emissions, primarily from the combustion of coal and oil, the ecosystem faces a significant threat. Therefore, as an effective method to minimize the issue, the Reverse Water Gas Shift (RWGS) reaction which converts CO2 towards CO attracts much attention, is an environmentally-friendly method to mitigate climate change and lessen dependence on fossil fuels. Nevertheless, the inherent thermodynamic stability and kinetic inertness of CO2 is a big challenge under mild conditions. In addition, it remains another fundamental challenge in RWGS reaction owing to CO selectivity issue caused by CO2 further hydrogenation towards CH4 . Up till now, a series of catalysis systems have been developed for CO2 reduction reaction to produce CO. Herein, the research progress of the well-performed heterogeneous catalysts for the RWGS reaction were summarized, including the catalyst design, catalytic performance and reaction mechanism. This review will provide insights into efficient utilization of CO2 and promote the development of RWGS reaction.

Distribution of Pt single atom coordination environments on anatase TiO2 supports controls reactivity

Single-atom catalysts (SACs) offer efficient metal utilization and distinct reactivity compared to supported metal nanoparticles. Structure-function relationships for SACs often assume that active sites have uniform coordination environments at particular binding sites on support surfaces. Here, we investigate the distribution of coordination environments of Pt SAs dispersed on shape-controlled anatase TiO2 supports specifically exposing (001) and (101) surfaces. Pt SAs on (101) are found on the surface, consistent with existing structural models, whereas those on (001) are beneath the surface after calcination. Pt SAs under (001) surfaces exhibit lower reactivity for CO oxidation than those on (101) surfaces due to their limited accessibility to gas phase species. Pt SAs deposited on commercial-TiO2 are found both at the surface and in the bulk, posing challenges to structure-function relationship development. This study highlights heterogeneity in SA coordination environments on oxide supports, emphasizing a previously overlooked consideration in the design of SACs.

Migration and aggregation of Pt atoms on metal oxide-supported ceria nanodomes control reverse water gas shift reaction activity

Single-atom catalysts (SACs) are particularly sensitive to external conditions, complicating the identification of catalytically active species and active sites under in situ or operando conditions. We developed a methodology for tracing the structural evolution of SACs to nanoparticles, identifying the active species and their link to the catalytic activity for the reverse water gas shift (RWGS) reaction. The new method is illustrated by studying structure-activity relationships in two materials containing Pt SACs on ceria nanodomes, supported on either ceria or titania. These materials exhibited distinctly different activities for CO production. Multimodal operando characterization attributed the enhanced activity of the titania-supported catalysts at temperatures below 320 ˚C to the formation of unique Pt sites at the ceria-titania interface capable of forming Pt nanoparticles, the active species for the RWGS reaction. Migration of Pt nanoparticles to titania support was found to be responsible for the deactivation of titania-supported catalysts at elevated temperatures. Tracking the migration of Pt atoms provides a new opportunity to investigate the activation and deactivation of Pt SACs for the RWGS reaction.

Defect-Driven Efficient Selective CO2 Hydrogenation with Mo-Based Clusters

Synthetic fuels produced from CO2 show promise in combating climate change. The reverse water gas shift (RWGS) reaction is the key to opening the CO2 molecule, and CO serves as a versatile intermediate for creating various hydrocarbons. Mo-based catalysts are of great interest for RWGS reactions featured for their stability and strong metal-oxygen interactions. Our study identified Mo defects as the intrinsic origin of the high activity of cluster Mo2C for CO2-selective hydrogenation. Specifically, we found that defected Mo2C clusters supported on nitrogen-doped graphene exhibited exceptional catalytic performance, attaining a reaction rate of 6.3 gCO/gcat/h at 400 °C with over 99% CO selectivity and good stability. Such a catalyst outperformed other Mo-based catalysts and noble metal-based catalysts in terms of facile dissociation of CO2, highly selective hydrogenation, and nonbarrier liberation of CO. Our study revealed that as a potential descriptor, the atomic magnetism linearly correlates to the liberation capacity of CO, and Mo defects facilitated product desorption by reducing the magnetization of the adsorption site. On the other hand, the defects were effective in neutralizing the negative charges of surface hydrogen, which is crucial for selective hydrogenation. Finally, we have successfully demonstrated that the combination of a carbon support and the carbonization process synergistically serves as a feasible strategy for creating rich Mo defects, and biochar can be a low-cost alternative option for large-scale applications.

Toward Quantum Chemical Free Energy Simulations of Platinum Nanoparticles on Titania Support

Platinum nanoparticles (Pt-NPs) supported on titania surfaces are costly but indispensable heterogeneous catalysts because of their highly effective and selective catalytic properties. Therefore, it is vital to understand their physicochemical processes during catalysis to optimize their use and to further develop better catalysts. However, simulating these dynamic processes is challenging due to the need for a reliable quantum chemical method to describe chemical bond breaking and bond formation during the processes but, at the same time, fast enough to sample a large number of configurations required to compute the corresponding free energy surfaces. Density functional theory (DFT) is often used to explore Pt-NPs; nonetheless, it is usually limited to some minimum-energy reaction pathways on static potential energy surfaces because of its high computational cost. We report here a combination of the density functional tight binding (DFTB) method as a fast but reliable approximation to DFT, the steered molecular dynamics (SMD) technique, and the Jarzynski equality to construct free energy surfaces of the temperature-dependent diffusion and growth of platinum particles on a titania surface. In particular, we present the parametrization for Pt-X (X = Pt, Ti, or O) interactions in the framework of the second-order DFTB method, using a previous parametrization for titania as a basis. The optimized parameter set was used to simulate the surface diffusion of a single platinum atom (Pt1) and the growth of Pt6 from Pt5 and Pt1 on the rutile (110) surface at three different temperatures (T = 400, 600, 800 K). The free energy profile was constructed by using over a hundred SMD trajectories for each process. We found that increasing the temperature has a minimal effect on the formation free energy; nevertheless, it significantly reduces the free energy barrier of Pt atom migration on the TiO2 surface and the transition state (TS) of its deposition. In a concluding remark, the methodology opens the pathway to quantum chemical free energy simulations of Pt-NPs' temperature-dependent growth and other transformation processes on the titania support.

Single-Atom Platinum Catalyst for Efficient CO2 Conversion via Reverse Water Gas Shift Reaction

The need to tackle CO2 emissions arising from the continuously rising combustion of fossil fuels has sparked considerable interest in investigating the reverse water gas shift (RWGS) reaction. This reaction holds great promise as an alternative technique for the conversion and utilization of CO2. In this study, a scalable method was employed to synthesize a single-atom Pt catalyst, uniformly dispersed on SiC, where up to 6.4 wt% Pt1 was loaded onto a support based on ligand modification and UV photoreduction. This Pt1/SiC catalyst exhibited a high selectivity (100%) towards the RWGS reaction; 54% CO2 conversion was observed at 900 °C with a H2/CO2 feed-in ratio of 1:1, significantly higher than the conventional Pt nanoparticle counterparts. Moreover, Pt1/SiC displayed a robust stability during the long-term test. The activation energy with as-synthesized Pt1/SiC was further calculated to be 61.6 ± 6.4 kJ/mol, which is much lower than the 91.6 ± 15.9 kJ/mol of the Pt nanoparticle counterpart and other Pt-based catalysts reported so far. This work offers new insights into the utilization of diverse single-atom catalysts for the RWGS reaction and other crucial catalytic processes, paving the way for the further exploration and application of SACs in various industrial endeavors.

Reactive Deposition Versus Strong Electrostatic Adsorption (SEA): A Key to Highly Active Single Atom Co-Catalysts in Photocatalytic H2 Generation

In recent years, the use of single atoms (SAs) has become of a rapidly increasing significance in photocatalytic H2 generation; here SA noble metals (mainly Pt SAs) can act as highly effective co-catalysts. The classic strategy to decorate oxide semiconductor surfaces with maximally dispersed SAs relies on "strong electrostatic adsorption" (SEA) of suitable noble metal complexes. In the case of TiO2 - the classic benchmark photocatalyst - SEA calls for adsorption of cationic Pt complexes such as [(NH3 )4 Pt]2+ which then are thermally reacted to surface-bound SAs. While SEA is widely used in literature, in the present work it is shown by a direct comparison that reactive attachment based on the reductive anchoring of SAs, e.g., from hexachloroplatinic(IV) acid (H2 PtCl6 ) leads directly to SAs in a configuration with a significantly higher specific activity than SAs deposited with SEA - and this at a significantly lower Pt loading and without any thermal post-deposition treatments. Overall, the work demonstrates that the reactive deposition strategy is superior to the classic SEA concept as it provides a direct electronically well-connected SA-anchoring and thus leads to highly active single-atom sites in photocatalysis.

Progress in photocatalytic CO2 reduction based on single-atom catalysts

Reduced CO2 emissions, conversion, and reuse are critical steps toward carbon peaking and carbon neutrality. Converting CO2 into high-value carbon-containing compounds or fuels may effectively address the energy shortage and environmental issues, which is consistent with the notion of sustainable development. Photocatalytic CO2 reduction processes have become one of the research focuses, where single-atom catalysts have demonstrated significant benefits owing to their excellent percentage of atom utilization. However, among the crucial challenges confronting contemporary research is the production of efficient, low-cost, and durable photocatalysts. In this paper, we offer a comprehensive overview of the study growth on single-atom catalysts for photocatalytic CO2 reduction reactions, describe several techniques for preparing single-atom catalysts, and discuss the advantages and disadvantages of single-atom catalysts and present the study findings of three single-atom photocatalysts with TiO2, g-C3N4 and MOFs materials as carriers based on the interaction between single atoms and carriers, and finally provide an outlook on the innovation of photocatalytic CO2 reduction reactions.

Dynamic Evolution of Palladium Single Atoms on Anatase Titania Support Determines the Reverse Water-Gas Shift Activity

Research interest in single-atom catalysts (SACs) has been continuously increasing. However, the lack of understanding of the dynamic behaviors of SACs during applications hinders catalyst development and mechanistic understanding. Herein, we report on the evolution of active sites over Pd/TiO₂-anatase SAC (Pd₁/TiO₂) in the reverse water-gas shift (rWGS) reaction. Combining kinetics, in situ characterization, and theory, we show that at T ≥ 350 °C, the reduction of TiO₂ by H₂ alters the coordination environment of Pd, creating Pd sites with partially cleaved Pd-O interfacial bonds and a unique electronic structure that exhibit high intrinsic rWGS activity through the carboxyl pathway. The activation by H₂ is accompanied by the partial sintering of single Pd atoms (Pd₁) into disordered, flat, ∼1 nm diameter clusters (Pd_n). The highly active Pd sites in the new coordination environment under H₂ are eliminated by oxidation, which, when performed at a high temperature, also redisperses Pd_n and facilitates the reduction of TiO₂. In contrast, Pd₁ sinters into crystalline, ∼5 nm particles (Pd_NP) during CO treatment, deactivating Pd₁/TiO₂. During the rWGS reaction, the two Pd evolution pathways coexist. The activation by H₂ dominates, leading to the increasing rate with time-on-stream, and steady-state Pd active sites similar to the ones formed under H₂. This work demonstrates how the coordination environment and nuclearity of metal sites on a SAC evolve during catalysis and pretreatments and how their activity is modulated by these behaviors. These insights on SAC dynamics and the structure-function relationship are valuable to mechanistic understanding and catalyst design.

Dynamic evolution of the active center driven by hemilabile coordination in Cu/CeO2 single-atom catalyst

Hemilability is an important concept in homogeneous catalysis where both the reactant activation and the product formation can occur simultaneously through a reversible opening and closing of the metal-ligand coordination sphere. However, this effect has rarely been discussed in heterogeneous catalysis. Here, by employing a theoretical study on CO oxidation over substituted Cu₁/CeO₂ single atom catalysts, we show that dynamic evolution of metal-support coordination can significantly change the electronic structure of the active center. The evolution of the active center is shown to either strengthen or weaken the metal-adsorbate bonding as the reaction proceeds from reactants, through intermediates, to products. As a result, the activity of the catalyst can be increased. We explain our observations by extending hemilability effects to single atom heterogenous catalysts and anticipate that introducing this concept can offer a new insight into the important role active site dynamics have in catalysis toward the rational design of more sophisticated single atom catalyst materials.

Filtration of the preferred catalyst for reverse water-gas shift among Rhn- (n = 3-11) clusters by mass spectrometry under variable temperatures

The key to optimizing energy-consuming catalytic conversions lies in acquiring a fundamental understanding of the nature of the active sites and the mechanisms of elementary steps at an atomically precise level, while it is challenging to capture the crucial step that determines the overall temperature of a real-life catalytic reaction. Herein, benefiting from a newly-developed high-temperature ion trap reactor, the reverse water-gas shift (CO₂ + H₂ → CO + H₂O) reaction catalyzed by the Rh_n^- (n = 3-11) clusters was investigated under variable temperatures (298-783 K) and the critical temperature that each elementary step (Rh_n^- + CO₂ and Rh_nO^- + H₂) requires to take place was identified. The Rh₄^- cluster strikingly surpasses other Rh_n^- clusters to drive the catalysis at a mild starting temperature (∼440 K). This finding represents the first example that a specifically sized cluster catalyst that works under an optimum condition can be accurately filtered by using state-of-the-art mass spectrometric experiments and rationalized by quantum-chemical calculations.

In situ formation of cocatalytic sites boosts single-atom catalysts for nitrogen oxide reduction

Nitrogen oxide (NOx) pollution presents a severe threat to the environment and human health. Catalytic reduction of NOx with H2 using single-atom catalysts poses considerable potential in the remediation of air pollution; however, the unfavorable process of H2 dissociation limits its practical application. Herein, we report that the in situ formation of PtTi cocatalytic sites (which are stabilized by Pt-Ti bonds) over Pt1/TiO2 significantly increases NOx conversion by reducing the energy barrier of H2 activation. We demonstrate that two H atoms of H2 molecule are absorbed by adjacent Pt atoms in Pt-O and Pt-Ti, respectively, which can promote the cleave of H-H bonds. Besides, PtTi sites facilitate the adsorption of NO molecules and further lower the activation barrier of the whole de-NOx reaction. Extending the concept to Pt1/Nb2O5 and Pd1/TiO2 systems also sees enhanced catalytic activities, demonstrating that engineering the cocatalytic sites can be a general strategy for the design of high-efficiency catalysts that can benefit environmental sustainability.

Synergistic Interactions of Neighboring Platinum and Iron Atoms Enhance Reverse Water-Gas Shift Reaction Performance

The limitations of conventional strategies in finely controlling the composition and structure demand new promotional effects for upgrading the reverse water-gas shift (RWGS) catalysts for enhanced fuel production. We report the design and synthesis of a hetero-dual-site catalyst for boosting RWGS performance by controllably loading Fe atoms at the neighboring Pt atom on the surface of commercial CeO₂. The Fe-Pt/CeO₂ exhibits a remarkably high catalytic performance (TOF_Pt: 43,519 h^-1) for CO₂ to CO conversion with ∼100% CO selectivity at a relatively low temperature of 350 °C. Furthermore, the catalyst retains over 80% activity after 200 h of continuous operation. The experimental and computational investigations reveal a "two-way synergistic effect", where Fe atoms can not only serve as promotors to alter the charge density of Pt atoms but also be activated by the excess active hydrogen species generated by Pt atoms, enhancing catalytic activity and stability.

Core-Sheath Pt-CeO2/Mesoporous SiO2 Electrospun Nanofibers as Catalysts for the Reverse Water Gas Shift Reaction

One-dimensional (1D) core-sheath nanofibers, platinum (Pt)-loaded ceria (CeO₂) sheath on mesoporous silica (SiO₂) core were fabricated, characterized, and used as catalysts for the reverse water gas shift reaction (RWGS). CeO₂ nanofibers (NFs) were first prepared by electrospinning (ES), and then Pt nanoparticles were loaded on the CeO₂ NFs using two different deposition methods: wet impregnation and solvothermal. A mesoporous SiO₂ sheath layer was then deposited by sol-gel process. The phase composition, structural, and morphological properties of synthesized materials were investigated by scanning electron microscope (SEM), scanning transmission electron microscopy (STEM), X-ray diffraction (XRD), nitrogen adsorption/desorption method, X-ray photoelectron spectroscopy (XPS), inductively coupled plasma-optical emission spectrometry (ICP-OES) analysis, and CO₂ temperature programmed desorption (CO₂-TPD). The results of these characterization techniques revealed that the core-sheath NFs with a core diameter between 100 and 300 nm and a sheath thickness of about 40-100 nm with a Pt loading of around 0.5 wt.% were successfully obtained. The impregnated catalyst, Pt-CeO₂ NF@mesoporous SiO₂, showed the best catalytic performance with a CO₂ conversion of 8.9% at 350 °C, as compared to the sample prepared by the Solvothermal method. More than 99% selectivity of CO was achieved for all core-sheath NF-catalysts.

Plasma-Catalytic CO2 Hydrogenation over a Pd/ZnO Catalyst: In Situ Probing of Gas-Phase and Surface Reactions

Plasma-catalytic CO₂ hydrogenation is a complex chemical process combining plasma-assisted gas-phase and surface reactions. Herein, we investigated CO₂ hydrogenation over Pd/ZnO and ZnO in a tubular dielectric barrier discharge (DBD) reactor at ambient pressure. Compared to the CO₂ hydrogenation using Plasma Only or Plasma + ZnO, placing Pd/ZnO in the DBD almost doubled the conversion of CO₂ (36.7%) and CO yield (35.5%). The reaction pathways in the plasma-enhanced catalytic hydrogenation of CO₂ were investigated by in situ Fourier transform infrared (FTIR) spectroscopy using a novel integrated in situ DBD/FTIR gas cell reactor, combined with online mass spectrometry (MS) analysis, kinetic analysis, and emission spectroscopic measurements. In plasma CO₂ hydrogenation over Pd/ZnO, the hydrogenation of adsorbed surface CO₂ on Pd/ZnO is the dominant reaction route for the enhanced CO₂ conversion, which can be ascribed to the generation of a ZnO _x overlay as a result of the strong metal-support interactions (SMSI) at the Pd-ZnO interface and the presence of abundant H species at the surface of Pd/ZnO; however, this important surface reaction can be limited in the Plasma + ZnO system due to a lack of active H species present on the ZnO surface and the absence of the SMSI. Instead, CO₂ splitting to CO, both in the plasma gas phase and on the surface of ZnO, is believed to make an important contribution to the conversion of CO₂ in the Plasma + ZnO system.

Gas-Permeable Iron-Doped Ceria Shell on Rh Nanoparticles with High Activity and Durability

Strong metal-support interaction (SMSI) is a promising strategy to control the structure of the supported metal catalyst. Especially, encapsulating metal nanoparticles through SMSI can enhance resistance against sintering but typically blocks the access of reactants onto the metal surface. Here, we report gas-permeable shells formed on Rh nanoparticles with enhanced activity and durability for the surface reaction. First, Fe species were doped into ceria, enhancing the transfer of surface oxygen species. When Rh was deposited onto the Fe-doped ceria (FC) and reduced, a shell was formed on Rh nanoparticles. Diffuse reflectance infrared Fourier-transform spectroscopy (DRIFTS) results show that the shell is formed upon reduction and removed upon oxidation reversibly. CO adsorption on the Rh surface through the shell was confirmed by cryo-DRIFTS. The reverse water gas shift (RWGS) reaction (CO₂ + H₂ → CO + H₂O) occurred on the encapsulated Rh nanoparticles effectively with selective CO formation, whereas bare Rh nanoparticles deposited on ceria produced methane as well. The CO adsorption became much weaker on the encapsulated Rh nanoparticles, and H₂-spillover occurred more on the FC, resulting in high activity for RWGS. The exposed Rh nanoparticles deposited on ceria presented degradation at 400 °C after 150 h of RWGS, whereas the encapsulated Rh nanoparticles showed no degradation with superior durability. Enhancing surface oxygen transfer can be an efficient way to form gas-permeable overlayers on metal nanoparticles with high activity and durability.

CO Adsorbate Promotes Polaron Photoactivity on the Reduced Rutile TiO2(110) Surface

Polarons play a major role in determining the chemical properties of transition-metal oxides. Recent experiments show that adsorbates can attract inner polarons to surface sites. These findings require an atomistic understanding of the adsorbate influence on polaron dynamics and lifetime. We consider reduced rutile TiO₂(110) with an oxygen vacancy as a prototypical surface and a CO molecule as a classic probe and perform ab initio adiabatic molecular dynamics, time-domain density functional theory, and nonadiabatic molecular dynamics simulations. The simulations show that subsurface polarons have little influence on CO adsorption and CO can desorb easily. On the contrary, surface polarons strongly enhance CO adsorption. At the same time, the adsorbed CO attracts polarons to the surface, allowing them to participate in catalytic processes with CO. The CO interaction with polarons changes their orbital origin, suppresses polaron hopping, and stabilizes them at surface sites. Partial delocalization of polarons onto CO decouples them from free holes, decreasing the nonadiabatic coupling and shortening the quantum coherence time, thereby reducing charge recombination. The calculations demonstrate that CO prefers to adsorb at the next-nearest-neighbor five-coordinated Ti³⁺ surface electron polaron sites. The reported results provide a fundamental understanding of the influence of electron polarons on the initial stage of reactant adsorption and the effect of the adsorbate-polaron interaction on the polaron dynamics and lifetime. The study demonstrates how charge and polaron properties can be controlled by adsorbed species, allowing one to design high-performance transition-metal oxide catalysts.

Noble-metal based single-atom catalysts for the water-gas shift reaction

Single-atom catalysts (SACs) have attracted great attention in heterogeneous catalysis. In this Feature Article, we summarize the recent advances of typical Au and Pt-group-metal (PGM) based SACs and their applications in the water-gas shift (WGS) reaction in the past two decades. First, oxide and carbide supported single atoms are categorized. Then, the active sites in the WGS reaction are identified and discussed, with SACs as the positive state or metallic state. After that, the reaction mechanisms of the WGS are presented, which are classified into two categories of redox mechanism and associative mechanism. Finally, the challenges and opportunities in this emerging field for the collection of hydrogen are proposed on the basis of current developments. It is believed that more and more exciting findings based on SACs are forthcoming.