Tough Ionogels: Synthesis, Toughening Mechanisms, and Mechanical Properties-A Perspective

Highly Stretchable, Low Hysteresis, and Transparent Ionogels as Conductors for Dielectric Elastomer Actuators

As conductive materials, ionogels have attracted significant attention for their potential applications in flexible wearable electronics. However, preparing an ionogel with mechanical properties akin to human skin while also achieving transparency, adhesion, and low hysteresis through simple processes remains challenging. Here, we introduce a multifunctional ionogel synthesized via a one-step photopolymerization method. By leveraging the good compatibility between the ionic liquid and the polymer network, as well as the hydrogen bonding and chemical crosslinking within the gel network, we achieved an ionogel with high transparency (>98%), stretchability (fracture strain of 19), low hysteresis (<5.83%), strong adhesion, robust mechanical stability, excellent electrical properties, a wide operating temperature range, and a tunable modulus (1-103 kPa) that matches human skin. When used as a conductor in soft actuators, the ionogel enabled a large area strain of 36% and a fast electromechanical conversion time of less than 1 s. The actuator demonstrated good actuation performance with voltage and frequency dependence, electrochemical stability, and outstanding durability over millions of cycles. This study provides a simple and effective method to produce multifunctional ionogels with tailored mechanical properties that match those of human skin, paving the way for their application in flexible wearable electronics.

Generation and Combination of Ionogel Microstructures Using the Vacuum-Driven Lithography Technique

Ionogels have gained significant attention as versatile materials for various advanced applications, particularly in environmental monitoring and biomedical sensing. Their ability to serve as highly sensitive and adaptable materials stems from their unique combination of ionic conductivity, mechanical flexibility, and tunable chemical and physical properties. However, the fabrication of precise and intricate microstructures with these materials remains a challenge, limiting their optimization for specific high-performance applications, such as miniaturized sensors, actuators, or devices requiring enhanced surface area or structural complexity. Addressing this limitation, this study introduces vacuum-driven lithography as an efficient, high-resolution method for generating homogeneous photocurable ionogel microstructures. This technique leverages a controlled vacuum environment to ensure precise and reproducible material distribution within intricate mold architectures, achieving detailed structures in a single loading and polymerization step. By optimizing the process with 20 Ultraviolet (UV) exposure cycles, ionogel microstructures with heights below 25 μm were fabricated, achieving the resolution defined by the mold generated by photolithographic techniques. These microstructures were fabricated using three distinct ionogels based on cross-linked poly(isopropylacrylamide) using ionic liquids as solvents: 1-ethyl-3-methylimidazolium ethyl sulfate, trihexyl(tetradecyl)phosphonium dicyanamide, and choline acetate. Furthermore, the functional versatility of these microstructures was demonstrated by incorporating bromocresol purple into the ionogel based on choline acetate, resulting in a robust colorimetric pH sensor capable of detecting pH values from 3 to 12. This study underscores the adaptability and stability of vacuum-driven lithography for ionogel microstructure fabrication, introducing a novel ionogel processing method.

Renewable Photosensitive Castor Oil to Fabricate Ionogels: Freezing-Tolerance, Stretchability, and Degradation for 3D Printing and Flexible Sensor Applications

With the escalating demands for sustainability in flexible sensing materials, the development of a novel, environmentally friendly, and multifunctional ionogel utilizing bio-based raw materials has become paramount. However, castor oil with abundant modified sites and natural flexible long carbon chain structure, is rarely explored in the context of ionogels. Here a novel approach is proposed to fabricate high-performance ionogels through rapid photopolymerization of photosensitive modified acrylate-based castor oil (ACO) with ACMO (acrylomorpholine), and [Mim-BS] [HSO4] (1-sulfobutyl-3-methylimidazolium hydrogen sulfate). Herein, ACO not only participates in the photochemical crosslinking of the ionogel but also imparts exceptional stretchability to the ionogel due to its flexible structure. By modulating the content of acrylate-based castor oil, the transparency, conductivity, and mechanical properties of the ionogel can be significantly enhanced. Furthermore, the ionogel incorporating a bio-sourced component (castor oil) obtained through this photochemical crosslinking process enables high-precision 3D printing and demonstrates remarkable degradability, low-temperature resistance, excellent self-healing capabilities, and sensing performance. These findings provide new perspectives for the design of green ionogels and beyond.

Progress of Ionogels in Flexible Pressure Sensors: A Mini-Review

This paper reviews the research progress on ionogels in flexible pressure sensors. Ionogels comprise solid carrier networks and ionic liquids (ILs) dispersed therein and have good non-volatility, high conductivity, thermal stability, a wide electrochemical window, and mechanical properties. These characteristics give ionogels broad application prospects in wearable electronic devices, intelligent robots, and healthcare. The article first introduces the classification of ionogels, including the classification based on ILs and solid carrier networks. Then, the preparation methods and processing technologies of ionogels, such as the direct mixing method, in situ polymerization/gel method, and solvent exchange method, are discussed. Subsequently, the article expounds in detail on the properties and modification methods of ionogels, including toughness, conductivity, hydrophobicity, self-healing, and adhesiveness. Finally, the article focuses on the application of ionogels in flexible pressure sensors and points out the challenges faced in future research. The language of this mini-review is academic but not overly technical, making it accessible to even researchers new to the field and establishing an overall impression of research. We believe this mini-review serves as a solid introductory resource for a niche topic, with large and clear references for further research.

Moisture-responsive ultralow-hysteresis polymer ionogels for adhesion-switchable strain sensing

Adhesion-switchable ultralow-hysteresis polymer ionogels are highly demanded in soft electronics to avoid debonding damage and signal distortion, yet the design and fabrication of such ionogels are challenging. Herein, we propose a novel method to design switchable adhesive ionogels by using binary ionic solvents with two opposite-affinity ionic components. The obtained ionogels exhibit moisture-induced phase separation, facilitating switchable adhesion with a high detaching efficiency (>99%). Moreover, before and after phase separation, the viscoelastic behavior of the ionogels is maintained in the rubbery plateau region within common frequency ranges with ultralow mechanical hysteresis (∼3%) under large strain, enabling accurate and stable strain and pressure sensing. Accordingly, the ionogel films can be used as functional elements in a smart clamp to realize flytrap-like selective activation, based on high sensitivity to the vibration intensity from the targeted prey. This work may inspire future research on the development of advanced soft electronics.

Robust Mechanically Interlocked Network Ionogels

Ionogels have attracted considerable attention as versatile materials due to their unique ionic conductivity and thermal stability. However, relatively weak mechanical performance of many existing ionogels has hindered their broader application. Herein, we develop robust, tough, and impact-resistant mechanically interlocked network ionogels (IGMINs) by incorporating ion liquids with mechanical bonds that can dissipate energy while maintain structural stability. Profiting from the dynamic yet stable nature of the mechanically interlocked networks, IGMINs exhibit high tensile strength (9.6 MPa), fracture energy (39 kJ/m2), and toughness (25.9 MJ/m3), along with a high elongation rate (473 %) and excellent impact resistance and shape memory, resulting in overall performance that surpasses most reported ionogels. Furthermore, in the application of strain sensors for monitoring the gait of crawling robots, the toughness and robustness of IGMINs ensure their ability to consistently output stable electrical signals during the stretching and contraction processes, thereby highlighting their practical application potential. Our work provides a new research strategy for toughening ionogels and promotes the development of mechanically interlocked materials.

Ionogel Adhesives: From Structural Design to Emerging Applications

Adhesives are indispensable in both daily household applications and advanced industrial settings, where they must deliver exceptional bonding performance. Ionogel adhesives, which feature a supporting polymer network infused with ionic liquid (IL), have emerged as promising candidates due to their unique structural and functional properties. The presence of ionic species within ionogels promotes non-covalent interactions-such as ionic bonds, ion-dipole interactions, and hydrogen bonding-that enhance both cohesion within the material and adhesion to various substrates. These characteristics make ionogels ideal for applications that require robust adhesive performance, especially in demanding environments. Despite the growing interest in ionogel adhesives, a comprehensive review of the latest advancements in this area is lacking. This paper aims to fill this gap by categorizing ionogel adhesives based on their composition and discussing strategies to enhance their adhesive properties. Additionally, novel ionogel adhesives designed for specific applications are highlighted. Finally, the current state of research is summarized, and offers insights into the challenges and future opportunities for the development of ionogel adhesives.

Magnetic Ionogel and Its Applications

Magnetic ionogels, a category of hybrid materials consisting of magnetic nanoparticles and ionic liquids, have garnered significant interest owing to their remarkable attributes, including tunability, flexibility, and reactivity to external magnetic fields. These materials provide a distinctive amalgamation of the benefits of both magnetic nanoparticles and ionogels, resulting in improved efficacy across many applications. Magnetic ionogels may be readily controlled using magnetic fields, rendering them suitable for drug administration, biosensing, soft robotics, and actuators. The capacity to incorporate these materials into dynamic systems presents novel opportunities for the development of responsive, intelligent materials capable of real-time environmental adaptation. Nonetheless, despite the promising potential of magnetic ionogels, problems persist, including the optimization of the magnetic particle dispersion, the enhancement of the ionogel mechanical strength, and the improvement of the long-term stability. This review presents a comprehensive examination of the syntheses, characteristics, and uses of magnetic ionogels, emphasizing significant breakthroughs and persistent problems within the domain. We examine recent advancements and prospective research trajectories aimed at enhancing the design and efficacy of magnetic ionogels for practical applications across diverse fields, including biomedical uses, sensors, and next-generation actuators. This review seeks to elucidate the present status of magnetic ionogels and their prospective influence on materials science and engineering.

Stimuli-Responsive Self-Healing Ionic Gels: A Promising Approach for Dermal and Tissue Engineering Applications

The rapid increase in the number of stimuli-responsive polymers, also known as smart polymers, has significantly advanced their applications in various fields. These polymers can respond to multiple stimuli, such as temperature, pH, solvent, ionic strength, light, and electrical and magnetic fields, making them highly valuable in both the academic and industrial sectors. Recent studies have focused on developing hydrogels with self-healing properties that can autonomously recover their structural integrity and mechanical properties after damage. These hydrogels, formed through dynamic covalent reactions, exhibit superior biocompatibility, mechanical strength, and responsiveness to stimuli, particularly pH changes. However, conventional hydrogels are limited by their weak and brittle nature. To address this, ionizable moieties within polyelectrolytes can be tuned to create ionically cross-linked hydrogels, leveraging natural polymers such as alginate, chitosan, hyaluronic acid, and cellulose. The integration of ionic liquids into these hydrogels enhances their mechanical properties and conductivity, positioning them as significant self-healing agents. This review focuses on the emerging field of stimuli-responsive ionic-based hydrogels and explores their potential in dermal applications and tissue engineering.

Ion-conducting polymer thin films via chemical vapor deposition polymerization

Ion-conducting polymers (ICPs), benefiting from the movement of ions instead of electrons, have attracted significant interest in various scientific and technological fields, including drug delivery, water purification, and electrochemical devices. This review aims to highlight recent advances in the synthesis of ICP thin films, with a particular focus on chemical vapor deposition (CVD) technologies. Traditional solution-based methods for ICP thin film deposition face challenges, including non-uniformity, low-throughput manufacturing, and the generation of hazardous wastes. In comparison, CVD eliminates the drawbacks associated with solution-based processes. They offer precise control film properties, including high purity, conformal coating, delicate control over thickness, etc. This review organizes the latest developments in CVD-based ICP synthesis, based on material properties and the synthesis strategy, into direct deposition and post-polymerization modification, ionogels, hydrogels, and ultrathin siloxane or silazane-based polymer films. By providing an up-to-date review of the materials and synthesis, we aim to position CVD polymerization as an effective strategy for future materials development/production and device fabrication in energy, sustainability, and healthcare where ion conductivity is desired.

"Frozen" Ionogels with High and Tunable Toughness for Soft Electronics

As a promising material, ionogels have garnered increasing interest in various applications including flexible electronics and energy storage. However, most existing ionogels suffer from poor mechanical properties. Herein, an effective and universal strategy is reported to toughen ionogels by freezing the polymer network via network design. As a proof of concept, an ionogel is readily prepared by copolymerization of isobornyl acrylate (IBA) and ethoxyethoxyethyl acrylate (CBA) in the presence of ionic liquid, resulting in a bicontinuous phase-separated structure. The rigid, ionic liquid-free PIBA segments remain frozen at service temperature and serve as a load-bearing phase to toughen ionogels, while the flexible PCBA phases maintain high ionic liquid content. As a result, the mechanical properties of ionogels are noticeably improved, showing high rigidity (48.5 MPa), strength (4.19 MPa), and toughness (8.19 MJ · m-3). Moreover, ionogels also exhibit remarkable thermo-softening performance, strong adhesiveness, high conductivity, shape memory properties, and satisfactory biocompatibility. When used as an ionic skin, the ionogel can not only respond to different deformation but also accurately and consistently detect body motions over long periods. This novel strategy in toughening ionogels can pave the way for the development of various tough and stable ionotronic devices.

Interplay of chain dynamics and ion transport on mechanical behavior and conductivity in ionogels

Understanding the interplay among the mechanical behavior, ionic conductivity and chain dynamics of ionogels is essential for designing flexible conductors that exhibit both high conductivity and excellent mechanical properties. In this study, ionogels were synthesized via the radical polymerization of N,N'-dimethylacrylamide (DMAA) and methacrylic acid (MAAc) monomers in the presence of ionic liquid 1-ethyl-3-methylimidazolium trifluoromethane sulfonate ([EMIM][OTf]). By varying the mass content of ionic liquid within ionogels, we investigated the mechanical behavior and ionic conductivity at the macroscopic scale using tensile, rheological testing and electrochemical impedance spectroscopy, as well as the dynamic behavior of chain segments and ions within the network at the microscopic scale using broadband dielectric relaxation spectroscopy (BDS) over a broad temperature range. Our findings revealed that variations in ionic liquid concentration significantly affect mechanical performance, ionic conductivity, complex conductivity spectra, and complex permittivity spectra. These ionogels exhibited remarkable stretchability, adhesion, and strain-sensing capabilities. Analysis of BDS indicated that the temperature dependence of the hopping frequency (ωH), the conductivity of free ions (σdc), and the relaxation time (τs) of chain segments conforms to the Vogel-Tammann-Fulcher (VTF) equation for ionogels with varying ionic liquid content. By correlating τs measured through rheological tests and BDS, we observed a transition from Arrhenius to VTF behavior, which shifts towards lower temperatures with increasing ionic liquid content. This study highlighted a strong coupling between σdc and ωH, as well as between 1/τs and ωH, at low ionic concentrations, facilitating high mechanical performance of the ionogels due to viscoelastic energy dissipation. However, as the ionic concentration increased, a slight decoupling of σdc and ωH was noted, leading to a substantial reduction in the mechanical properties of the ionogels. Ultimately, these ionogels demonstrate potential as polymer electrolytes for applications in flexible wearable devices.

Sea Cucumber-Inspired Polyurethane Demonstrating Record-Breaking Mechanical Properties in Room-Temperature Self-Healing Ionogels

Practical applications of existing self-healing ionogels are often hindered by the trade-off between their mechanical robustness, ionic conductivity, and temperature requirements for their self-healing ability. Herein, this challenge is addressed by drawing inspiration from sea cucumber. A polyurethane containing multiple hydrogen-bond donors and acceptors is synthesized and used to fabricate room-temperature self-healing ionogels with excellent mechanical properties, high ionic conductivity, puncture resistance, and impact resistance. The hard segments of polyurethane, driven by multiple hydrogen bonds, coalesce into hard phase regions, which can efficiently dissipate energy through the reversible disruption and reformation of multiple hydrogen bonds. Consequently, the resulting ionogels exhibit record-high tensile strength and toughness compared to other room-temperature self-healing ionogels. Furthermore, the inherent reversibility of multiple hydrogen bonds within the hard phase regions allows the ionogels to spontaneously and efficiently self-heal damaged mechanical properties and ionic conductivity multiple times at room temperature. To underscore their application potential, these ionogels are employed as electrolytes in the fabrication of electrochromic devices, which exhibit excellent and stable electrochromic performance, repeatable healing ability, and satisfactory impact resistance. This study presents a novel strategy for the fabrication of ionogels with exceptional mechanical properties and room-temperature self-healing capability.

Straightforward preparation of a tough and stretchable ion gel

Ion gels, polymer networks swollen by ionic liquids, are expected to be applied to wearable devices that are tolerant to repeated stretching. High strength and excellent stretchability was achieved due to the numerous physical cross-links with abundant polymer chain entanglements in addition to a small number of immobile chemical cross-links, even though the ion gel was prepared by a facile methodology.

Jellyfish-Inspired Polyurea Ionogel with Mechanical Robustness, Self-Healing, and Fluorescence Enabled by Hyperbranched Cluster Aggregates

Ionogels are promising for soft iontronics, with their network structure playing a pivotal role in determining their performance and potential applications. However, simultaneously achieving mechanical toughness, low hysteresis, self-healing, and fluorescence using existing network structures is challenging. Drawing inspiration from jellyfish, we propose a novel hierarchical crosslinking network structure design for in situ formation of hyperbranched cluster aggregates (HCA) to fabricate polyurea ionogels to overcome these challenges. Leveraging the disparate reactivity of isocyanate groups, we induce the in situ formation of HCA through competing reactions, enhancing toughness and imparting the clustering-triggered emission of ionogel. This synergy between supramolecular interactions in the network and plasticizing effect in ionic liquid leads to reduced hysteresis of the ionogel. Furthermore, the incorporation of NCO-terminated prepolymer with dynamic oxime-urethane bonds (NPU) enables self-healing and enhances stretchability. Our investigations highlight the significant influence of HCA on ionogel performance, showcasing mechanical robustness including high strength (3.5 MPa), exceptional toughness (5.5 MJ m-3), resistance to puncture, and low hysteresis, self-healing, as well as fluorescence, surpassing conventional dynamic crosslinking approaches. This network design strategy is versatile and can meet the various demands of flexible electronics applications.

3D Printing of Thermo-Mechano-Responsive Photoluminescent Noncovalent Cross-Linked Ionogels with High-Stretchability and Ultralow-Hysteresis for Wearable Ionotronics and Anti-Counterfeiting

Ionogel has recently emerged as a promising ionotronic material due to its good ionic conductivity and flexibility. However, low stretchability and significant hysteresis under long-term loading limit their mechanical stability and repeatability. Developing ultralow hysteresis ionogels with high stretchability is of great significance. Here, a simple and effective strategy is developed to fabricate highly stretchable and ultralow-hysteresis noncovalent cross-linked ionogels based on phase separation by 3D printing of 2-hydroxypropyl acrylate (HPA) in 1-butyl-3-methylimidazolium tetrafluoroborate (BMIMBF4). Ingeniously, the sea-island structure of the physically cross-linked network constructed by the smaller nanodomains and larger nanodomain clusters significantly minimizes the energy dissipation, endowing these ionogels with remarkable stretchability (>1000%), ultra-low hysteresis (as low as 0.2%), excellent temperature tolerance (-33-317 °C), extraordinary ionic conductivity (up to 1.7 mS cm-1), and outstanding durability (5000 cycles). Moreover, due to the formation of nanophase separation and cross-linking structure, the as-prepared ionogels exhibit unique thermochromic and multiple photoluminescent properties, which can synergistically be applied for anti-counterfeiting and encrypting. Importantly, flexible thermo-mechano-multimodal visual ionotronic sensors for strain and temperature sensing with highly stable and reproducible electrical response over 20 000 cycles are fabricated, showing synergistically optical and electrical output performances.

Filler effects inspired high performance polyurethane elastomer design: segment arrangement control

Elastomers with high strength and toughness are in great demand. Previous research on elastomers focused mainly on the design of new chemical structures, but their complicated synthesis process and expensive monomers have restricted the practical application of these materials. Inspired by general filler effects, a strategy is proposed to remarkably enhance the mechanical properties of thermoplastic polyurethane (TPU) elastomers by designing the arrangement of hard/soft segments using traditional chemical compositions. By utilizing the synergetic effect of weak hard segments, normal TPU elastomers are upgraded into advanced elastomers. Combining experiments and simulations, it is demonstrated that a suitable sequence length can achieve considerably enhanced strength and toughness by maximizing the relative surface area of hard domains. Mixing the obtained elastomer with an ionic liquid can result in a durable ionogel sensor with balanced mechanical strength and ionic conductivity. This easy-to-implement strategy offers a new dimension for the development of high-performance elastomers.

Mechanical Regulation of Polymer Gels

The mechanical properties of polymer gels devote to emerging devices and machines in fields such as biomedical engineering, flexible bioelectronics, biomimetic actuators, and energy harvesters. Coupling network architectures and interactions has been explored to regulate supportive mechanical characteristics of polymer gels; however, systematic reviews correlating mechanics to interaction forces at the molecular and structural levels remain absent in the field. This review highlights the molecular engineering and structural engineering of polymer gel mechanics and a comprehensive mechanistic understanding of mechanical regulation. Molecular engineering alters molecular architecture and manipulates functional groups/moieties at the molecular level, introducing various interactions and permanent or reversible dynamic bonds as the dissipative energy. Molecular engineering usually uses monomers, cross-linkers, chains, and other additives. Structural engineering utilizes casting methods, solvent phase regulation, mechanochemistry, macromolecule chemical reactions, and biomanufacturing technology to construct and tailor the topological network structures, or heterogeneous modulus compositions. We envision that the perfect combination of molecular and structural engineering may provide a fresh view to extend exciting new perspectives of this burgeoning field. This review also summarizes recent representative applications of polymer gels with excellent mechanical properties. Conclusions and perspectives are also provided from five aspects of concise summary, mechanical mechanism, biofabrication methods, upgraded applications, and synergistic methodology.

Highly Stretchable, Tissue-like Ag Nanowire-Enhanced Ionogel Nanocomposites as an Ionogel-Based Wearable Sensor for Body Motion Monitoring

The development of wearable electronic devices for human health monitoring requires materials with high mechanical performance and sensitivity. In this study, we present a novel transparent tissue-like ionogel-based wearable sensor based on silver nanowire-reinforced ionogel nanocomposites, P(AAm-co-AA) ionogel-Ag NWs composite. The composite exhibits a high stretchability of 605% strain and a moderate fracture stress of about 377 kPa. The sensor also demonstrates a sensitive response to temperature changes and electrostatic adsorption. By encapsulating the nanocomposite in a polyurethane transparent film dressing, we address issues such as skin irritation and enable multidirectional stretching. Measuring resistive changes of the ionogel nanocomposite in response to corresponding strain changes enables its utility as a highly stretchable wearable sensor with excellent performance in sensitivity, stability, and repeatability. The fabricated pressure sensor array exhibits great proficiency in stress distribution, capacitance sensing, and discernment of fluctuations in both external electric fields and stress. Our findings suggest that this material holds promise for applications in wearable and flexible strain sensors, temperature sensors, pressure sensors, and actuators.

Bionic Artificial Skin Based on Self-Healable Ionogel Composites with Tailored Mechanics and Robust Interfaces

Bionic artificial skin which imitates the features and functions of human skin, has broad applications in wearable human-machine interfaces. However, equipping artificial materials with skin-like mechanical properties, self-healing ability, and high sensitivity remains challenging. Here, inspired by the structure of human skin, an artificial skin based on ionogel composites with tailored mechanical properties and robust interface is prepared. Combining finite element analysis and direct ink writing (DIW) 3D printing technology, an ionogel composite with a rigid skeleton and an ionogel matrix is precisely designed and fabricated, realizing the mechanical anisotropy and nonlinear mechanical response that accurately mimic human skin. Robust interface is created through co-curing of the skeleton and matrix resins, significantly enhancing the stability of the composite. The realization of self-healing ability and resistance to crack growth further ensure the remarkable durability of the artificial skin for sensing application. In summary, the bionic artificial skin mimics the characteristics of human skin, including mechanical anisotropy, nonlinear mechanical response, self-healing capability, durability and high sensitivity when applied as flexible sensors. These strategies provide strong support for the fabrication of tissue-like materials with adaptive mechanical behaviors.

Glassy gels toughened by solvent

Glassy polymers are generally stiff and strong yet have limited extensibility1. By swelling with solvent, glassy polymers can become gels that are soft and weak yet have enhanced extensibility1-3. The marked changes in properties arise from the solvent increasing free volume between chains while weakening polymer-polymer interactions. Here we show that solvating polar polymers with ionic liquids (that is, ionogels4,5) at appropriate concentrations can produce a unique class of materials called glassy gels with desirable properties of both glasses and gels. The ionic liquid increases free volume and therefore extensibility despite the absence of conventional solvent (for example, water). Yet, the ionic liquid forms strong and abundant non-covalent crosslinks between polymer chains to render a stiff, tough, glassy, and homogeneous network (that is, no phase separation)6, at room temperature. Despite being more than 54 wt% liquid, the glassy gels exhibit enormous fracture strength (42 MPa), toughness (110 MJ m-3), yield strength (73 MPa) and Young's modulus (1 GPa). These values are similar to those of thermoplastics such as polyethylene, yet unlike thermoplastics, the glassy gels can be deformed up to 670% strain with full and rapid recovery on heating. These transparent materials form by a one-step polymerization and have impressive adhesive, self-healing and shape-memory properties.

Stretchable and Transparent Heaters Based on Hydrophobic Ionogels with Superior Moisture Insensitivity

Flexible and stretchable transparent heaters (THs) have been widely used in various applications, including deicing and defogging of flexible screens as well as thermotherapy pads. Ionic THs based on ionogels have emerged as a promising alternative to conventional electronic THs due to their unique advantages in terms of transparency-conductance conflict, uniform heating, and interfacial adhesion. However, the commonly used hydrophilic ionogels inevitably introduce a moisture-sensitive issue. In this work, we present a stretchable and transparent hydrophobic ionogel-based heater that utilizes ionic current-induced Joule heating under high-frequency alternating current. This ionogel-based TH exhibits exceptional multifunctional properties with low hysteresis, a fracture strain of 840%, transmittance of 93%, conductivity of 0.062 S m-1, temperature resistance up to 165 °C, voltage resistance up to 120 V, heating rate of 0.1 °C s-1, steady-state temperature at 115 °C, and uniform heating even when bent or stretched (up to 200%). Furthermore, it maintains its heating performance when it is directly exposed to water. This hydrophobic ionogel-based TH expands the range of materials available for ionic THs and paves the way for their practical applications.

Fluorine-Containing Ionogels with Stretchable, Solvent-Resistant, Wide Temperature Tolerance, and Transparent Properties for Ionic Conductors

Stretchable ionogels, as soft ion-conducting materials, have generated significant interest. However, the integration of multiple functions into a single ionogel, including temperature tolerance, self-adhesiveness, and stability in diverse environments, remains a challenge. In this study, a new class of fluorine-containing ionogels was synthesized through photo-initiated copolymerization of fluorinated hexafluorobutyl methacrylate and butyl acrylate in a fluorinated ionic liquid 1-butyl-3-methyl imidazolium bis (trifluoromethylsulfonyl) imide. The resulting ionogels demonstrate good stretchability with a fracture strain of ~1300%. Owing to the advantages of the fluorinated network and the ionic liquid, the ionogels show excellent stability in air and vacuum, as well as in various solvent media such as water, sodium chloride solution, and hexane. Additionally, the ionogels display impressive wide temperature tolerance, functioning effectively within a wide temperature range from -60 to 350 °C. Moreover, due to their adhesive properties, the ionogels can be easily attached to various substrates, including plastic, rubber, steel, and glass. Sensors made of these ionogels reliably respond to repetitive tensile-release motion and finger bending in both air and underwater. These findings suggest that the developed ionogels hold great promise for application in wearable devices.

Block copolymer synthesis in ionic liquid via polymerisation-induced self-assembly: a convenient route to gel electrolytes

We report for the first time a reversible addition-fragmentation chain transfer polymerisation-induced self-assembly (RAFT-PISA) formulation in ionic liquid (IL) that yields worm gels. A series of poly(2-hydroxyethyl methacrylate)-b-poly(benzyl methacrylate) (PHEMA-b-PBzMA) block copolymer nanoparticles were synthesised via RAFT dispersion polymerisation of benzyl methacrylate in the hydrophilic IL 1-ethyl-3-methyl imidazolium dicyanamide, [EMIM][DCA]. This RAFT-PISA formulation can be controlled to afford spherical, worm-like and vesicular nano-objects, with free-standing gels being obtained over a broad range of PBzMA core-forming degrees of polymerisation (DPs). High monomer conversions (≥96%) were obtained within 2 hours for all PISA syntheses as determined by 1H NMR spectroscopy, and good control over molar mass was confirmed by gel permeation chromatography (GPC). Nanoparticle morphologies were identified using small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM), and further detailed characterisation was conducted to monitor rheological, electrochemical and thermal characteristics of the nanoparticle dispersions to assess their potential in future electronic applications. Most importantly, this new PISA formulation in IL facilitates the in situ formation of worm ionogel electrolyte materials at copolymer concentrations >4% w/w via efficient and convenient synthesis routes without the need for organic co-solvents or post-polymerisation processing/purification. Moreover, we demonstrate that the worm ionogels developed in this work exhibit comparable electrochemical properties and thermal stability to that of the IL alone, showcasing their potential as gel electrolytes.

Strain-Induced Phase Separation and Mechanomodulation of Ionic Conduction in Anisotropic Nanocomposite Ionogels

Ionogels have great potential for the development of tissue-like, soft, and stretchable ionotronics. However, conventional isotropic ionogels suffer from poor mechanical properties, low efficient force transmission, and tardy mechanoelectric response, hindering their practical utility. Here, we propose a simple one-step method to fabricate bioinspired anisotropic nanocomposite ionogels based on a combination of strain-induced phase separation and mechanomodulation of ionic conduction in the presence of attapulgite nanorods. These ionogels show high stretchability (747.1% strain), tensile strength (6.42 MPa), Young's modulus (83.49 MPa), and toughness (18.08 MJ/m3). Importantly, the liquid crystalline domain alignment-induced microphase separation and ionic conductivity enhancement during stretching endow these ionogels with an unusual mechanoelectric response and dual-programmable shape-memory properties. Moreover, the anisotropic structure, good elasticity, and unique resistance-strain responsiveness give the ionogel-based strain sensors high sensitivity, rapid response time, excellent fatigue resistance, and unique waveform-discernible strain sensing, which can be applied to real-time monitoring of human motions. The findings offer a promising way to develop bioinspired anisotropic ionogels to modulate the microstructure and properties for practical applications in advanced ionotronics.

Ultra-Tough and Highly Stretchable Dual-Crosslinked Eutectogel Based on Coordinated and Non-Coordinated Two Types Deep Eutectic Solvent Mixture

Eutectogels are gaining attention in flexible device applications for their superior ionic conductivity, stability, biocompatibility, and cost-effectiveness. However, most existing eutectogels suffer from low strength and toughness. Herein, ultra-tough and highly stretchable polyacrylamide (PAM) eutectogels featuring a dual-crosslinked network comprising chemical cross-linking and physical cross-linking facilitated by metal coordination bonds and hydrogen bonds are developed. This is achieved through a controlled strategy involving polymerization of acrylamide in a coordinated metal salt-type deep eutectic solvent (DES) combined with a non-coordinated choline chloride (ChCl)-type DES mixture. By varying the molar ratio of these two types of DES, exceptional and adjustable mechanical properties of the resulting eutectogel are achieved, including a high tensile strength ranging from 2.9 to 8.2 MPa and elongation at break ranging from 1725 to 747%, at a 70 wt% DES content. Furthermore, the reversible non-covalent crosslinking in these eutectogels enables self-recovery and self-healing capabilities of eutectogels. The prepared eutectogels also exhibit outstanding ionic conductivity (3.56 mS cm-1 ), making them well-suited for use as strain sensors in human motion detection. The toughening strategy is universally effective for creating tough eutectogels using coordinated metal salt-type DES with various metal ions, as well as a diverse range of coordinatable polymers.

Hydrogen Bonds Reinforced Ionogels with High Sensitivity and Stable Autonomous Adhesion as Versatile Ionic Skins

Flexible wearable sensors have demonstrated enormous potential in various fields such as human health monitoring, soft robotics, and motion detection. Among them, sensors based on ionogels have garnered significant attention due to their wide range of applications. However, the fabrication of ionogels with high sensitivity and stable autonomous adhesion remains a challenge, thereby limiting their potential applications. Herein, we present an advanced ionogel (PACG-MBAA) with exceptional performances based on multiple hydrogen bonds, which is fabricated through one-step radical polymerization of N-acryloylglycine (ACG) in 1-ethyl-3-methylimidazolium ethyl sulfate (EMIES) in the presence of N,N'-methylenebis(acrylamide) (MBAA). Compared with the ionogel (PAA-MBAA) formed by polymerization of acrylic acid (AA) in EMIES, the resulting ionogel exhibits tunable mechanical strength (35-130 kPa) and Young's modulus comparable to human skin (60-70 kPa) owing to the multiple hydrogen bonds formation. Importantly, they demonstrate stable autonomous adhesion to various substrates and good self-healing capabilities. Furthermore, the ionogel-based sensor shows high sensitivity (with a gauge factor up to 6.16 in the tensile range of 300-700%), enabling the detection of both gross and subtle movements in daily human activities. By integration of the International Morse code, the ionogel-based sensor enables the encryption, decryption, and transmission of information, thus expanding its application prospects.

Preparation of tough and stiff ionogels via phase separation

Ionogels have the advantages of thermal stability, non-volatility, ionic conductivity and environmental friendliness, and they can be used in the field of flexible electronics and soft robotics. However, their poor mechanical strength and complex preparation methods limit their practical application. Herein, we propose a simple strategy to improve the performance of ionogels by adjusting their phase separation behavior. In a polymer-ionic liquid (IL) binary system with an upper critical solution temperature (UCST) and Berghmans' point, the phase separation behavior will be frozen below the temperature corresponding to the Berghmans' point, and thus, the degree of phase separation can be adjusted by controlling the cooling rate. We found that a polyacrylamide (PAM)-IL binary system possessed a UCST and Berghmans' point and the resulting ionogels had excellent mechanical properties. Their tensile strength, tensile modulus, compressive strength and compressive modulus reached 31.1 MPa, 319.8 MPa, 122 MPa and 1.7 GPa, respectively, while these properties of the other ionogels were generally less than 10 MPa. Furthermore, they were highly transparent, stretchable, stable and multifunctional.

Environment Endurable, Self-Healing, Super-Adhesive, and Mechanically Strong Ionogels for Reliable Sensing

Ionogels possess high conductivity, stretchability, and adhesion, making them promising as flexible sensors. However, it remains challenging to fabricate an ionogel which integrates excellent environment endurance, superior mechanical strength, high self-healing efficiency, and super adhesion. Herein, a supramolecular ionic liquid is synthesized using calcium chloride and 1-butyl-3-methylimidazolium chloride. An advanced ionogel based on this supramolecular ionic liquid is conveniently constructed by a one-pot method with acrylamide and acrylic acid as monomers. The supramolecular cross-linking network, formed by affluent coordination interactions, hydrogen bonds, and electrostatic interactions, provides the ionogel with ideal mechanical strength (tensile strength up to 1.7 MPa), high self-healing efficiency (up to 149%), super adhesion (up to 358 kPa on aluminum), excellent solvent tolerance (less than 10% weight increase, high mechanical and sensing performance retention after being soaked in organic solvents), and low-temperature endurance (breaking elongation can reach 87% at -30 °C). The supramolecular ionogels can function as multi-mode sensors, capable of monitoring strain and different amplitudes of human movements in real-time. Moreover, the sensing performance of ionogels remains unaffected even after being self-healed or exposure to organic solvents. It is expected that this study could offer valuable design ideas to construct advanced gel materials applicable in complicated environment.

A comparative study of the impacts of preparation techniques on the rheological and textural characteristics of emulsion gels (emulgels)

A subtype of soft solid-like substances are emulsion gels (emulgels; EGs). These composite material's structures either consist of a network of aggregated emulsion droplets or a polymeric gel matrix that contains emulsion droplets. The product's rheological signature can be used to determine how effective it is for a specific application. The interactions between these structured system's separate components and production process, however, have a substantial impact on their rheological imprint. Therefore, rational comprehension of interdependent elements, their structural configurations, and the resulting characteristics of a system are essential for accelerating our progress techniques as well as for fine-tuning the technological and functional characteristics of the finished product. This article presents a comprehensive overview of the mechanisms and procedures of producing EGs (i.e., cold-set and heat-set) in order to determine the ensuing rheological features for various commercial applications, such as food systems. It also describes the influence of these methods on the rheological and textural characteristics of the EGs. Diverse preparation methods are the cause of the rheological-property correlations between different EGs. In many ways, EGs can be produced using various matrix polymers, processing techniques, and purposes. This may lead to various EG matrix structures and interactions between them, which in turn may affect the composition of EGs and ultimately their textural and rheological characteristics.

Preparation and Characterization of Silica-Based Ionogel Electrolytes and Their Application in Solid-State Lithium Batteries

In this study, tetraethyl orthosilicate (TEOS) and methyltriethoxysilane (MTES) were used as precursors for silica, combined with the ionic liquid [BMIM-ClO4]. Lithium perchlorate was added as the lithium-ion source, and formic acid was employed as a catalyst to synthesize silica ionogel electrolytes via the sol-gel method. FT-IR and NMR identified the self-prepared ionic liquid [BMIM-ClO4], and its electrochemical window was determined using linear sweep voltammetry (LSV). The properties of the prepared silica ionogel electrolytes were further investigated through FT-IR, DSC, and 29Si MAS NMR measurements, followed by electrochemical property measurements, including conductivity, electrochemical impedance spectroscopy (EIS), LSV, and charge-discharge tests. The experimental results showed that adding methyltriethoxysilane (MTES) enhanced the mechanical strength of the silica ionogel electrolyte, simplifying its preparation process. The prepared silica ionogel electrolyte exhibited a high ionic conductivity of 1.65 × 10-3 S/cm. In the LSV test, the silica ionogel electrolyte demonstrated high electrochemical stability, withstanding over 5 V without oxidative decomposition. Finally, during the discharge-charge test, the second-cycle capacity reached 108.7 mAh/g at a discharge-charge rate of 0.2 C and a temperature of 55 °C.