Polymer Chain Dynamics of Core−Shell Thermosensitive Microgels

3D Optical Coherence Thermometry Using Polymeric Nanogels

In nanothermometry, the use of nanoparticles as thermal probes enables remote and minimally invasive sensing. In the biomedical context, nanothermometry has emerged as a powerful tool where traditional approaches, like infrared thermal sensing and contact thermometers, fall short. Despite the strides of this technology in preclinical settings, nanothermometry is not mature enough to be translated to the bedside. This is due to two major hurdles: the inability to perform 3D thermal imaging and the requirement for tools that are readily available in the clinics. This work simultaneously overcomes both limitations by proposing the technology of optical coherence thermometry (OCTh). This is achieved by combining thermoresponsive polymeric nanogels and optical coherence tomography (OCT)-a 3D imaging technology routinely used in clinical practice. The volume phase transition of the thermoresponsive nanogels causes marked changes in their refractive index, making them temperature-sensitive OCT contrast agents. The ability of OCTh to provide 3D thermal images is demonstrated in tissue phantoms subjected to photothermal processes, and its reliability is corroborated by comparing experimental results with numerical simulations. The results included in this work set credible foundations for the implementation of nanothermometry in the form of OCTh in clinical practice.

Thermoresponsive Polymeric Nanolenses Magnify the Thermal Sensitivity of Single Upconverting Nanoparticles

Lanthanide-based upconverting nanoparticles (UCNPs) are trustworthy workhorses in luminescent nanothermometry. The use of UCNPs-based nanothermometers has enabled the determination of the thermal properties of cell membranes and monitoring of in vivo thermal therapies in real time. However, UCNPs boast low thermal sensitivity and brightness, which, along with the difficulty in controlling individual UCNP remotely, make them less than ideal nanothermometers at the single-particle level. In this work, it is shown how these problems can be elegantly solved using a thermoresponsive polymeric coating. Upon decorating the surface of NaYF₄ :Er³⁺ ,Yb³⁺ UCNPs with poly(N-isopropylacrylamide) (PNIPAM), a >10-fold enhancement in optical forces is observed, allowing stable trapping and manipulation of a single UCNP in the physiological temperature range (20-45 °C). This optical force improvement is accompanied by a significant enhancement of the thermal sensitivity- a maximum value of 8% °C⁺¹ at 32 °C induced by the collapse of PNIPAM. Numerical simulations reveal that the enhancement in thermal sensitivity mainly stems from the high-refractive-index polymeric coating that behaves as a nanolens of high numerical aperture. The results in this work demonstrate how UCNP nanothermometers can be further improved by an adequate surface decoration and open a new avenue toward highly sensitive single-particle nanothermometry.

Atomic scale investigation of the volume phase transition in concentrated PNIPAM microgels

Combining elastic incoherent neutron scattering and differential scanning calorimetry, we investigate the occurrence of the volume phase transition (VPT) in very concentrated poly-(N-isopropyl-acrylamide) (PNIPAM) microgel suspensions, from a polymer weight fraction of 30 wt. % up to dry conditions. Although samples are arrested at the macroscopic scale, atomic degrees of freedom are equilibrated and can be probed in a reproducible way. A clear signature of the VPT is present as a sharp drop in the mean square displacement of PNIPAM hydrogen atoms obtained by neutron scattering. As a function of concentration, the VPT gets smoother as dry conditions are approached, whereas the VPT temperature shows a minimum at about 43 wt. %. This behavior is qualitatively confirmed by calorimetry measurements. Molecular dynamics simulations are employed to complement experimental results and gain further insights into the nature of the VPT, confirming that it involves the formation of an attractive gel state between the microgels. Overall, these results provide evidence that the VPT in PNIPAM-based systems can be detected at different time- and length-scales as well as under overcrowded conditions.

From molecular dehydration to excess volumes of phase-separating PNIPAM solutions

For aqueous poly(N-isopropyl acrylamide) (PNIPAM) solutions, a structural instability leads to the collapse and aggregation of the macromolecules at the temperature-induced demixing transition. The accompanying cooperative dehydration of the PNIPAM chains is known to play a crucial role in this phase separation. We elucidate the impact of partial dehydration of PNIPAM on the volume changes related to the phase separation of dilute to concentrated PNIPAM solutions. Quasi-elastic neutron scattering enables us to directly follow the isotropic jump diffusion behavior of the hydration water and the almost freely diffusing water. As the hydration number decreases from 8 to 2 for the demixing 25 mass % PNIPAM solution, only a partial dehydration of the PNIPAM chains occurs. Dilatation studies reveal that the transition-induced volume changes depend in a remarkable manner on the PNIPAM concentration of the solutions. The excess volume per mole of H2O molecules expelled from the solvation layers of PNIPAM during phase separation probably strongly increases from dilute to concentrated PNIPAM solutions. This finding is qualitatively related to the immense strain-softening previously observed for demixing PNIPAM solutions.

Structure and polymer dynamics within PNIPAM-based microgel particles

The synthesis of temperature-responsive microgels of poly(N-isopropylacrylamide) (PNIPAM) was first reported in 1986 and, since then, there have been hundreds of publications describing the preparation, characterization and applications of these systems. This paper reviews the developments concerning the study of the structure of PNIPAM-based microgels performed over the last years using small angle neutron scattering (SANS) and also the investigations of the polymer-chain dynamics within the microgels carried out with incoherent elastic and quasielastic neutron scattering, and pulse field gradient nuclear magnetic resonance (PFG-NMR) techniques. Furthermore, the self-diffusion coefficient of the water molecules within the microgel, determined by means of solvent relaxation NMR, is also discussed as a function of the polymer volume fraction of the microgels.

The study of release of chlorhexidine from preparations with modified thermosensitive poly-N-isopropylacrylamide microspheres

The aim of this study was to investigate and compare the release rates of chlorhexidine (CX) base entrapped in the polymeric beads of modified poly-N-isopropylacrylamides (pNIPAMs) at temperatures below and over the volume phase transition temperature (VPTT) of synthesized polymers: pNIPAM-A with terminal anionic groups resulting from potassium persulfate initiator, pNIPAM-B with cationic amidine terminal groups, and pNIPAM-C comprising anionic terminals, but with increased hydrophobicity maintained by the N-tert-butyl functional groups. The preparations, assessed in vitro below the VPTT, release an initial burst of CX at different time periods between 120 and 240 min, followed by a period of 24 h, when the rate of release remains approximately constant, approaching the zero-order kinetics; the release rates for the polymers beads are as follows: pNIPAM-C>pNIPAM-B>pNIPAM-A. The pattern of release rates at temperature over the VPTT is as follows: pNIPAM-C>pNIPAM-A>pNIPAM-B. In the presence of pNIPAM-C, the duration between the start of the release and the attained minimal inhibitory concentration (MIC) for most of the microbes, in conditions over the VPTT, increased from 60 to 90 min. The release prolongation could be ascribed to some interactions between the practically insoluble CX particle and the hydrophobic functional groups of the polymer.

Infrared spectroscopic insight into hydration behavior of poly(N-vinylcaprolactam) in water

IR spectroscopy in combination with two-dimensional correlation spectroscopy (2DCOS) and the perturbation correlation moving window (PCMW) technique is employed to illustrate the dynamic hydration behavior of poly(N-vinylcaprolactam) (PVCL) in water, which exhibits a typical type I continuous lower critical solution temperature (LCST) behavior. PCMW easily determined the transition temperature to be ca. 43.5 °C during heating and ca. 42.5 °C during cooling and the transition temperature range to be 39.5-45 °C. On the other hand, 2DCOS was used to discern the sequence order of different species in PVCL and concluded that hydrogen bonding transformation predominates at the first stage below LCST while hydrophobic interaction predominates at the second stage above LCST. In combination with molecular dynamics simulation results, we find that there exists a distribution gradient of water molecules in PVCL mesoglobules ranging from a hydrophobic core to a hydrophilic surface. Due to the absence of self-associated hydrogen bonds and topological constraints, PVCL mesoglobules would form a "sponge-like" structure which can further continuously expel water molecules upon increasing temperature, while poly(N-isopropylacrylamide) (PNIPAM) with self-associated hydrogen bonds forms mesoglobules with a "cotton-ball-like" structure without an apparent distribution gradient of water molecules and does not change much upon increasing temperature.

Investigation of the relationship between hydrogen bonds and macroscopic properties in hybrid core-shell gamma-Fe2O3-P(NIPAM-AAS) microgels

We investigate in a hybrid material the interactions existing between magnetic nanoparticles of gamma-Fe(2)O(3) and the polymer matrix constituted by core-shell poly(N-isopropylacrylamide-sodium acrylate) microgels. These interactions provoke the shifting of the microgel volume phase transition to higher temperatures when the amount of gamma-Fe(2)O(3) increases. The study was performed using different techniques such as incoherent quasi-elastic neutron scattering (IQNS), infrared spectroscopy (FTIR-ATR), and dynamic light scattering (DLS). Below the low critical solution temperature (LCST) of the polymer, the IQNS data confirm that the presence of inorganic nanoparticles affects the PNIPAM chain motions. Thus, in the swollen state both the mean-square displacement of the polymer segments and the diffusive motion of the polymer chains decrease as the iron oxide content increases. The FTIR-ATR study indicates that the reduction of vibrational and diffusional motions of the polymer chains is due to the formation of hydrogen bonds between the amide groups of the polymer matrix and the OH groups of the magnetic nanoparticles. The creation of this hybrid complex would explain the reduction of the swelling capacity with increasing the iron content in the microgels. Furthermore, this interaction could also explain the shift of the polymer LCST to higher temperatures as due to the extra energy required by the system to break the hydrogen bonds prior to the PNIPAM collapse.

Dynamics of Nanostructures for Drug Delivery: the Potential of QENS

In recent biomedical studies different nanocarrier systems have been proposed for ´smart´ drug delivery. The engineering of these systems requires as a prerequisite a detailed knowledge of their structure and dynamics at the molecular level. Quasielastic neutron scattering is an ideal tool for dynamic studies of these complex systems since it provides information on molecular motions in a time window which is important to relate the local dynamics to the macroscopic functional properties of the drug vectors. Some selected examples referring to different nanostructures will be analysed in the following.

Interpenetrated PNIPAM-polythiophene microgels for nitro aromatic compound detection

In this work, we present a facile and reproducible method to obtain thermally responsive, monodisperse, fluorescent microgels with diameters smaller than 700 nm based on poly(N-isopropyl acrylamide) (PNIPAM) interpenetrated with poly(thiophene-ethyl buthyl sulfonate) (PTEBS). Changing the temperature and inducing the microgel volume phase transition, it is possible to modify the photoluminescence (PL) properties of the microgels. Thus, when the temperature was below the low critical solution temperature (LCST) of PNIPAM, the PL intensity was higher than that above the LCST. Time-resolved fluorescence measurements indicate that, in the swollen state, the increment of cross-linking increases the fluorescence decay time of PTEBS. By contrast, in the collapsed state, variations in the decay time were attributed to higher rigidity of the PNIPAM-PTEBS system, which was confirmed by neutron scattering measurements. Moreover, the shift in the wavelength of the fluorescence emission peak observed above the LCST indicates that the collapsed PNIPAM matrix was able to interact with the PTEBS chains hindering the formation of pi-pi interactions. This property is envisaged for developing a picric acid microsensor based on the formation of pi-pi interactions with the pi-conjugated polymer, thus quenching its PL emission. Above the LCST of PNIPAM-PTEBS microgels, the interactions would be broken and the initial PL emission would be recovered. This property could render reusable microsensors for detection of nitro aromatic compounds.