Liquid crystalline nanowires in porous alumina: geometric confinement versus influence of pore walls

Orientational transitions of discotic columnar liquid crystals in cylindrical pores

Confined in a cylindrical pore with homeotropic anchoring condition, the hexagonal columnar phase of discotic liquid crystals can form a "log-pile" configuration, in which the columns are perpendicular to the long axis of the pore. However, the {100} planes of the hexagonal lattice can orient either parallel (termed (100)‖ orientation) or perpendicular ((100)⊥) to pore axis. Here we experimentally show that the (100)‖ orientation is found in narrower cylindrical pores, and the (100)‖-(100)⊥ transition can be controlled by engineering the structure of the molecules. The (100)‖ orientation is destroyed in asymmetric discotics hepta(heptenyloxy)triphenylene (SATO7); replacing the oxygen linkage in hexa(hexyloxy)triphenylene (HATO6) by sulphur (HATS6) improves the (100)‖ orientation in small pores; adding a perfluorooctyl end to each alkyl chain of HATO6 (HATO6F8) moves the (100)‖-(100)⊥ transition to larger pores. We have provided a semi-quantitative explanation of the experimental observations, and discussed them in the context of previous findings on related materials in a wider pore size range from 60 nm to 100 μm. This allows us to produce a comprehensive picture of confined columnar liquid crystals whose applications critically depend on our ability to align them.

Homeotropic orientation of an ion-channel forming mesophase induced by nanotemplate wetting

Anodic aluminum oxide (AAO) membranes were used as templates to control orientation of an ion-channel forming columnar mesophase obtained by self assembly of a wedge-shaped sulfonate molecule. Inside the AAO structure, the director vector of the mesophase is oriented parallel to the pore axis due to the confinement effect. The molecular arrangement induced by the spatial confinement within the pores is extended over several microns into the remnant film on the AAO surface. The homeotropic alignment of the channels promotes unidimensional ion conduction through the film plane, which is manifested by a considerable increase in conductivity relative to isotropic samples.

Progress in self-assemblies of macrocycles at the liquid/solid interface

Macrocyclic self-assemblies have gained great interest for diversified structures and potential applications, such as catalysis, magnetism, photovoltaic devices, organic light-emitting diodes. Macrocycles can present regular assembly systems at the liquid/solid interface due to theπ-conjugated structures. Furthermore, suitable guest molecules can be selected for constructing multi-component supramolecular co-assemblies. This review mainly summarizes macrocyclic self-assembly structures with different shapes in recent years. All of the studies are completed with the assistance of scanning tunneling microscope at the liquid/solid interface.

Fast Evaporation Enabled Ultrathin Polymer Coatings on Nanoporous Substrates for Highly Permeable Membranes

Thin polymer coatings covering on porous substrates are a common composite structure required in numerous applications, including membrane separation, and there is a strong need to push the coating thicknesses down to the nanometer scale to maximize the performances. However, producing such ultrathin polymer coatings in a facile and efficient way remains a big challenge. Here, uniform ultrathin polymer covering films (UPCFs) are realized by a facile and general approach based on rapid solvent evaporation. By fast evaporating dilute polymer solutions spread on the surface of porous substrates, we obtain ultrathin coatings (down to ∼30 nm) exclusively on the top surface of porous substrates, forming UPCFs with a block copolymer of polystyrene-block-poly(2-vinyl pyridine) at room temperature or a homopolymer of poly(vinyl alcohol) (PVA) at elevated temperatures. Upon selective swelling of the block copolymer and crosslinking of PVA, we obtain highly permeable membranes delivering ∼2–10 times higher permeance in ultrafiltration and pervaporation than state-of-the-art membranes with comparable selectivities. We have invented a very convenient but highly efficient process for the direct preparation of defective-free ultrathin coatings on porous substrates, which is extremely desired in different fields in addition to membrane separation.

•

Fast solvent evaporation is developed to produce UPCFs on porous substrates

•

Selective swelling to cavitate block copolymers to form interconnected mesopores

•

UPCFs enable the preparation of highly permeable membranes

Nanoconfinement-Mediated Water Treatment: From Fundamental to Application

Safe and clean water is of pivotal importance to all living species and the ecosystem on earth. However, the accelerating economy and industrialization of mankind generate water pollutants with much larger quantity and higher complexity than ever before, challenging the efficacy of traditional water treatment technologies. The flourishing researches on nanomaterials and nanotechnologies in the past decade have generated new understandings on many fundamental processes and brought revolutionary upgrades to various traditional technologies in almost all areas, including water treatment. An indispensable step toward the real application of nanomaterials in water treatment is to confine them in large processable substrate to address various inherent issues, such as spontaneous aggregation, difficult operation and potential environmental risks. Strikingly, when the size of the spatial restriction provided by the substrate is on the order of only one or several nanometers, referred to as nanoconfinement, the phase behavior of matter and the energy diagram of a chemical reaction could be utterly changed. Nevertheless, the relationship between such changes under nanoconfinement and their implications for water treatment is rarely elucidated systematically. In this Critical Review, we will briefly summarize the current state-of-the-art of the nanomaterials, as well as the nanoconfined analogues (i.e., nanocomposites) developed for water treatment. Afterward, we will put emphasis on the effects of nanoconfinement from three aspects, that is, on the structure and behavior of water molecules, on the formation (e.g., crystallization) of confined nanomaterials, and on the nanoenabled chemical reactions. For each aspect, we will build the correlation between the nanoconfinement effects and the current studies for water treatment. More importantly, we will make proposals for future studies based on the missing links between some of the nanoconfinement effects and the water treatment technologies. Through this Critical Review, we aim to raise the research attention on using nanoconfinement as a fundamental guide or even tool to advance water treatment technologies.

Self-assembly of liquid crystals in nanoporous solids for adaptive photonic metamaterials

Nanoporous media exhibit structures significantly smaller than the wavelengths of visible light and can thus act as photonic metamaterials. Their optical functionality is not determined by the properties of the base materials, but rather by tailored, multiscale structures, in terms of precise pore shape, geometry, and orientation. Embedding liquid crystals in pore space provides additional opportunities to control light-matter interactions at the single-pore, meta-atomic scale. Here, we present temperature-dependent 3D reciprocal space mapping using synchrotron-based X-ray diffraction in combination with high-resolution birefringence experiments on disk-like mesogens (HAT6) imbibed in self-ordered arrays of parallel cylindrical pores 17 to 160 nm across in monolithic anodic aluminium oxide (AAO). In agreement with Monte Carlo computer simulations we observe a remarkably rich self-assembly behaviour, unknown from the bulk state. It encompasses transitions between the isotropic liquid state and discotic stacking in linear columns as well as circular concentric ring formation perpendicular and parallel to the pore axis. These textural transitions underpin an optical birefringence functionality, tuneable in magnitude and in sign from positive to negative via pore size, pore surface-grafting and temperature. Our study demonstrates that the advent of large-scale, self-organised nanoporosity in monolithic solids along with confinement-controllable phase behaviour of liquid-crystalline matter at the single-pore scale provides a reliable and accessible tool to design materials with adjustable optical anisotropy, and thus offers versatile pathways to fine-tune polarisation-dependent light propagation speeds in materials. Such a tailorability is at the core of the emerging field of transformative optics, allowing, e.g., adjustable light absorbers and extremely thin metalenses.

Collective orientational order and phase behavior of a discotic liquid crystal under nanoscale confinement

The phase behavior and molecular ordering of hexakishexyloxy triphenylene (HAT6) DLCs under cylindrical nanoconfinement are studied utilizing differential scanning calorimetry (DSC) and dielectric spectroscopy (DS), where cylindrical nanoconfinement is established through embedding HAT6 into the nanopores of anodic aluminum oxide (AAO) membranes, and a silica membrane with pore diameters ranging from 161 nm down to 12 nm. Both unmodified and modified pore walls were considered. In the latter case the pore walls of AAO membranes were chemically treated with n-octadecylphosphonic acid (ODPA) resulting in the formation of a 2.2 nm thick layer of grafted alkyl chains. Phase transition enthalpies decrease with decreasing pore size, indicating that a large proportion of the HAT6 molecules within the pores has a disordered structure, which increases with decreasing pore size for both pore walls. In the case of the ODPA-modification, the amount of ordered HAT6 is increased compared to the unmodified case. The pore size dependencies of the phase transition temperatures were approximated using the Gibbs-Thomson equation, where the estimated surface tension is dependent on the molecular ordering of HAT6 molecules within the pores and upon their surface. DS was employed to investigate the molecular ordering of HAT6 within the nanopores. These investigations revealed that with a pore size of around 38 nm, for the samples with the unmodified pore walls, the molecular ordering changes from planar axial to homeotropic radial. However, the planar axial configuration, which is suitable for electronic applications, can be successfully preserved through ODPA-modification for most of the pore sizes.

Manipulation of Supramolecular Columnar Structures of H-Bonded Donor-Acceptor Units through Geometrical Nanoconfinement

Ambipolar organic semiconductors are considered promising for organic electronics because of their interesting electric properties. Many hurdles remain yet to be overcome before they can be used for practical applications, especially because their orientation is hard to control. We demonstrate a method to control the orientation of columnar structures based on a hydrogen (H)-bonded donor-acceptor complex between a star-shaped tris(triazolyl)triazine and triphenylene-containing benzoic acid, using physicochemical nanoconfinement. The molecular configuration and supramolecular columnar assemblies in a one-dimensional porous anodic aluminium oxide (AAO) film were dramatically modulated by controlling the pore-size and by chemical modification of the inner surface of the porous AAO film. In situ experiments using grazing-incidence X-ray diffraction (GIXRD) were carried out to investigate the structural evolution produced at the nanometer scale by varying physicochemical conditions. The resulting highly ordered nanostructures may open a new pathway to effectively control the alignment of liquid crystal ambipolar semiconductors.

Multiple glassy dynamics in dipole functionalized triphenylene-based discotic liquid crystals revealed by broadband dielectric spectroscopy and advanced calorimetry - assessment of the molecular origin

A selected series of dipole functionalized triphenylene-based discotic liquid crystals (DLCs) was synthesized and investigated in a systematic way to reveal the phase behavior and molecular dynamics. The later point is of particular importance to understand the charge transport in such systems which is the key property for their applications such as organic field-effect transistors, solar cells or as nanowires in molecular electronics, and also to tune the properties of DLCs. The mesomorphic properties were studied by polarizing optical microscopy, X-ray diffraction, and differential scanning calorimetry, which were compared to the corresponding unfunctionalized DLC. The molecular dynamics were investigated by a combination of state-of-the-art broadband dielectric spectroscopy (BDS) and advanced calorimetry such as fast scanning calorimetry (FSC) and specific heat spectroscopy (SHS). Besides localized fluctuations, surprisingly multiple glassy dynamics were detected for all materials for the first time. Glassy dynamics were proven for both processes unambiguously due to the extraordinary broad frequency range covered. The α1-process is attributed to fluctuations of the alky chains in the intercolumnar space because a polyethylene-like glassy dynamics is observed. This corresponds to a glass transition in a confined three-dimensional space. The α2-process found at temperatures lower than α1-process, is assigned to small scale rotational and/or translational in plane fluctuations of the triphenylene core inside distorted columns. This can be considered as a glass transition in a one-dimensional fluid. Therefore, obtained results are of general importance to understand the glass transition, which is an unsolved problem of condensed matter science.

Patterning of Discotic Liquid Crystals with Tunable Molecular Orientation for Electronic Applications

The large-area formation of functional micropatterns with liquid crystals is of great significance for diversified applications in interdisciplinary fields. Meanwhile, the control of molecular alignment in the patterns is fundamental and prerequisite for the adequate exploitation of their photoelectric properties. However, it would be extremely complicated and challenging for discotic liquid crystals (DLCs) to achieve the goal, because they are insensitive to external fields and surface chemistry. Herein, a simple method of patterning and aligning DLCs on flat substrates is disclosed through precise control of the formation and dewetting of the capillary liquid bridges, within which the DLC molecules are confined. Large-area uniform alignment occurs spontaneously due to directional shearing force when the solvent is slowly evaporated and programmable patterns could be directly generated on desired substrates. Moreover, the in-plane column direction of DLCs is tunable by slightly tailoring their chemical structures which changes their self-assembly behaviors in liquid bridges. The patterned DLCs show molecular orientation-dependent charge transport properties and are promising for templating self-assembly of other materials. The study provides a facile method for manipulation of the macroscopic patterns and microscopic molecular orientation which opens up new opportunities for electronic applications of DLCs.

One Methylene Group in the Side Chain Can Alter by 90 Degrees the Orientation of a Main-Chain Liquid Crystal on a Unidirectional Substrate

The mechanisms of orientation of columnar liquid crystals (LCs) on a PTFE-rubbed surface are explored on a homologous series of symmetrically substituted poly(di-n-alkylsiloxanes) (PDAS). It is shown that by increasing the side-chain length in steps of one CH₂ group, the orientation of PDAS switches back and forth from perpendicular to parallel with respect to PTFE chains. These changes are sensitive to the smallest possible variation of the macromolecular structure (i.e., modification of the side chain length by just one CH₂ group) reflect the alteration of the alignment mechanism identified as graphoepitaxial or epitaxial for the perpendicular and parallel orientation, respectively. The results show that two orthogonal LC orientations are realizable on the same rubbed substrate, which can open new perspectives in the field of organic and printed electronics such as multidomain LCD technology.

Quantized Self-Assembly of Discotic Rings in a Liquid Crystal Confined in Nanopores

Disklike molecules with aromatic cores spontaneously stack up in linear columns with high, one-dimensional charge carrier mobilities along the columnar axes, making them prominent model systems for functional, self-organized matter. We show by high-resolution optical birefringence and synchrotron-based x-ray diffraction that confining a thermotropic discotic liquid crystal in cylindrical nanopores induces a quantized formation of annular layers consisting of concentric circular bent columns, unknown in the bulk state. Starting from the walls this ring self-assembly propagates layer by layer towards the pore center in the supercooled domain of the bulk isotropic-columnar transition and thus allows one to switch on and off reversibly single, nanosized rings through small temperature variations. By establishing a Gibbs free energy phase diagram we trace the phase transition quantization to the discreteness of the layers' excess bend deformation energies in comparison to the thermal energy, even for this near room-temperature system. Monte Carlo simulations yielding spatially resolved nematic order parameters, density maps, and bond-orientational order parameters corroborate the universality and robustness of the confinement-induced columnar ring formation as well as its quantized nature.

Diverse configurations of columnar liquid crystals in cylindrical nano- and micropores

Using 2D X-ray diffraction and AFM we studied the configuration, in cylindrical confinement, of hexagonal columnar phases that anchor homeotropically, i.e. with the columns normal to the pore wall. A wide range of pore diameters, from 20 nm to 100 μm, were explored by employing anodic alumina membranes and glass capillaries. The compounds used were a small discotic, hexakis(hexyloxy)triphenylene (HAT6), a large discotic hexa-peri-hexabenzocoronene (HBC), and a T-shaped bolaamphiphile, forming a honeycomb-type columnar phase. It was found that in pores up to tens of μm in diameter the columns adopt the "logpile" configuration with parallel columns crossing the pore perpendicular to its axis. Starting with 20 nm pores, with increasing pore diameter up to 5 different configurations are observed, the sequence being the same for all three compounds in spite of their structural diversity. One of the {100} planes of the hexagonal logpile starts from being parallel to the pore axis, then rotates by 90° as the pore size increases, and eventually becomes tilted to the pore axis by (8.5 ± 1)° as the pore widens further. Finally, in glass capillaries of tens of μm and beyond, the columns become axially oriented, parallel to the capillary axis. This latter finding was particularly unexpected as common sense would suggest axial columns to be favoured by planar anchoring, where in fact, it was shown to be hard to achieve. The present findings should help in the design of low-dimensional semiconductor or ionic conductor devices based on oriented columnar phases.

Interfacial Interaction in Anodic Aluminum Oxide Templates Modifies Morphology, Surface Area, and Crystallization of Polyamide-6 Nanofibers

Here, we demonstrated that, when the precipitation process of polyamide-6 (PA6) solution happens in cylindrical channels of an anodized aluminum oxide membrane (AAO), interface interactions between a solid surface, solvent, non-solvent, and PA6 will influence the obtained polymer nanostructures, resulting in complex morphologies, increased surface area, and crystallization changes. With the enhancing interaction of PA6 and the AAO surface, the morphology of PA6 nanostructures changes from solid nanofibers, mesoporous, to bamboo-like, while at the same time, metastable γ-phase domains increase in these PA6 nanostructures. Brunauer-Emmett-Teller (BET) surface areas of solid, bamboo-like, and mesoporous PA6 nanofibers rise from 16, 20.9, to 25 m(2)/g. This study shows that interfacial interaction in AAO template fabrication can be used in manipulating the morphology and crystallization of one-dimensional polymer nanostructures. It also provides us a simple and novel method to create porous PA6 nanofibers with a large surface area.

Ultralong Ordered Nanowires from the Concerted Self-Assembly of Discotic Liquid Crystal and Solvent Molecules

The realization of long, aligned molecular wires is a great challenge, and a variety of approaches have been proposed. Interestingly, hexapentyloxytriphenylene (HAT5) discotic liquid crystal molecules, a model system of molecules with flat and aromatic cores, can spontaneously form well-aligned, micrometer long, yet only tens of nanometers thick, nanowires on solid surfaces. We have investigated the formation mechanism of these wires using different solvents with selected characteristics, including chemical structure, boiling point, vapor pressure, and surface tension. When casting from toluene and benzene solutions, atomic force microscopy reveals that the discotics spontaneously form very long and thin wires, self-aligning along a common orientation. If instead dodecane or heptane are used, different and in general thicker structures are obtained. The chemical structure of the solvent appears to have a key role, coupling to the liquid crystal self-assembly by allowing solvent molecules to enter the ordered structure if their design matches the core of HAT5 molecules, thereby guiding the assembly. However, other aspects are also relevant in the assembly, including the nature of the substrate and the rate of solvent evaporation, and these can favor or interfere with the self-assembly into long structures. The use of solvents with aromatic structure is advantageous not only because it affects the geometry of the assembly, promoting long wire formation, but it is also compatible with good quality of the intermolecular order, as suggested by a high anisotropy of the Raman spectra of the nanowires formed from these solvents. Finally, the electrical properties of ordered systems show a clearly higher electrical conductivity compared to the disorganized aggregates.

High-resolution dielectric study reveals pore-size-dependent orientational order of a discotic liquid crystal confined in tubular nanopores

We report a high-resolution dielectric study on a pyrene-based discotic liquid crystal (DLC) in the bulk state and confined in parallel tubular nanopores of monolithic silica and alumina membranes. The positive dielectric anisotropy of the DLC molecule at low frequencies (in the quasistatic case) allows us to explore the thermotropic collective orientational order. A face-on arrangement of the molecular discs on the pore walls and a corresponding radial arrangement of the molecules is found. In contrast to the bulk, the isotropic-to-columnar transition of the confined DLC is continuous, shifts with decreasing pore diameter to lower temperatures, and exhibits a pronounced hysteresis between cooling and heating. These findings corroborate conclusions from previous neutron and x-ray-scattering experiments as well as optical birefringence measurements. Our study also indicates that the relative simple dielectric technique presented here is a quite efficient method in order to study the thermotropic orientational order of DLC-based nanocomposites.

Soft matter in hard confinement: phase transition thermodynamics, structure, texture, diffusion and flow in nanoporous media

Spatial confinement in nanoporous media affects the structure, thermodynamics and mobility of molecular soft matter often markedly. This article reviews thermodynamic equilibrium phenomena, such as physisorption, capillary condensation, crystallisation, self-diffusion, and structural phase transitions as well as selected aspects of the emerging field of spatially confined, non-equilibrium physics, i.e. the rheology of liquids, capillarity-driven flow phenomena, and imbibition front broadening in nanoporous materials. The observations in the nanoscale systems are related to the corresponding bulk phenomenologies. The complexity of the confined molecular species is varied from simple building blocks, like noble gas atoms, normal alkanes and alcohols to liquid crystals, polymers, ionic liquids, proteins and water. Mostly, experiments with mesoporous solids of alumina, gold, carbon, silica, and silicon with pore diameters ranging from a few up to 50 nm are presented. The observed peculiarities of nanopore-confined condensed matter are also discussed with regard to applications. A particular emphasis is put on texture formation upon crystallisation in nanoporous media, a topic both of high fundamental interest and of increasing nanotechnological importance, e.g. for the synthesis of organic/inorganic hybrid materials by melt infiltration, the usage of nanoporous solids in crystal nucleation or in template-assisted electrochemical deposition of nano structures.

Columnar liquid crystals in cylindrical nanoconfinement

Axial orientation of discotic columnar liquid crystals in nanopores of inorganic templates, with the columns parallel to the axis of the nanochannels, is considered desirable for applications such as production of molecular wires. Here, we evaluate experimentally the role of the rigidity of the LC columns in achieving such orientation in nanopores where the planar anchoring (i.e., columns parallel to wall surface) is enforced. We studied the columnar phase of several discotic compounds with increasing column rigidity in the following order: dendronized carbazole, hexakis(hexyloxy)triphenylene (HAT6), a 1:1 HAT6-trinitrofluorenone (TNF) complex, and a helicene derivative. Using 2-D X-ray diffraction, AFM, grazing incidence diffraction, and polarized microscopy, we observed that the orientation of the columns changes from circular concentric to axial with increasing column rigidity. Additionally, when the rigidity is borderline, increasing pore diameter can change the configuration from axial back to circular. We derive expressions for distortion free energy that suggest that the orientation is determined by the competition between, on the one hand, the distortion energy of the 2-d lattice and the mismatch of its crystallographic facets with the curved pore wall in the axial orientation and, on the other hand, the bend energy of the columns in the circular configuration. Furthermore, the highly detailed AFM images of the core of the disclinations of strength +1 and +1/2 in the center of the pore reveal that the columns spiral down to the very center of the disclination and that there is no amorphous or misaligned region at the core, as suggested previously.

Thermotropic orientational order of discotic liquid crystals in nanochannels: an optical polarimetry study and a Landau-de Gennes analysis

Optical polarimetry measurements of the orientational order of a discotic liquid crystal based on a pyrene derivative confined in parallelly aligned nanochannels of monolithic, mesoporous alumina, silica, and silicon as a function of temperature, channel radius (3-22 nm) and surface chemistry reveal a competition of radial and axial columnar orders. The evolution of the orientational order parameter of the confined systems is continuous, in contrast to the discontinuous transition in the bulk. For channel radii larger than 10 nm we suggest several, alternative defect structures, which are compatible both with the optical experiments on the collective molecular orientation presented here and with a translational, radial columnar order reported in previous diffraction studies. For smaller channel radii our observations can semi-quantitatively be described by a Landau-de Gennes model with a nematic shell of radially ordered columns (affected by elastic splay deformations) that coexists with an orientationally disordered, isotropic core. For these structures, the cylindrical phase boundaries are predicted to move from the channel walls to the channel centres upon cooling, and vice-versa upon heating, in accord with the pronounced cooling/heating hystereses observed and the scaling behavior of the transition temperatures with the channel diameter. The absence of experimental hints of a paranematic state is consistent with a biquadratic coupling of the splay deformations to the order parameter.

Honeycombs in honeycombs: complex liquid crystal alumina composite mesostructures

Small-angle X-ray scattering (SAXS) and atomic force microscopy (AFM) were used to study orientation patterns of two polyphilic liquid crystals (LC) confined to cylindrical pores of anodic aluminum oxide (AAO). The hierarchical hybrid systems had the LC honeycomb (lattice parameter 3.5-4 nm) inside the pores of the AAO honeycomb (diameters 60 and 400 nm). By conducting complete reciprocal space mapping using SAXS, we conclude that the columns of both compounds align in planes normal to the AAO pore axis, with a specific crystallographic direction of the LC lattice aligning strictly parallel to the pore axis. AFM of LC-containing AAO fracture surfaces further revealed that the columns of the planar anchoring LC (compound 1) formed concentric circles in the plane normal to the pore axis near the AAO wall. Toward the pore center, the circles become anisometric "racetrack" loops consisting of two straight segments and two semicircles. This mode compensates for slight ellipticity of the pore cross section. Indications are, however, that for perfectly circular pores, circular shape is maintained right to the center of the pore, the radius coming down to the size of a molecule. For the homeotropically anchoring compound 2, the columns are to the most part straight and parallel to each other, arranged in layers normal to the AAO pore axis, like logs in an ordered pile. Only near the pore wall the columns splay somewhat. In both cases, columns are confined to layers strictly perpendicular to the AAO pore axis, and there is no sign of escape to the third dimension or of axial orientation, the latter having been reported previously for some discotic LCs. The main cause of the two new LC configurations, the "racetrack" and the "logpile", and of their difference from those of confined nematic LC, is the very high splay energy and low bend energy of columnar phases.

Poly(3-hexylthiophene) nanowires in porous alumina: internal structure under confinement

We study the structure of poly(3-hexylthiophene) (P3HT) subjected to nanoscale confinement in two dimensions (2D) as imposed by the rigid walls of nanopore anodic aluminum oxide (AAO) templates. P3HT nanowires with aspect ratios (length-to-diameter) above 1000 and diameters ranging between 15 nm and 350 nm are produced in the pores of the AAO templates via two processing routes. These are, namely, drying a solution or cooling from the melt. Our study focuses on the effects of nanoconfinement on the semicrystalline nature of the nanowires, the orientation of crystals, and the evolution of the structures that P3HT might develop under confinement, which we investigate by combining imaging (SEM), spectroscopic (FTIR, photoluminescence) and structural characterization (WAXS, DSC) techniques. Solution-processed P3HT nanowires are essentially amorphous and porous, whereas melt-processed nanowires are semicrystalline, and present a more compact morphology and smoother surfaces. In the latter case, the orientation of crystals was found to strongly depend on the pore diameter. In large diameter nanowires (250 nm and 120 nm), crystals are oriented laying the π-π stacking direction parallel to the nanowire axis. In contrast, in small diameter nanowires, the π-π stacking direction is mainly perpendicular to the nanowires, as crystals are likely to nucleate at pore walls. The structural evolution of P3HT upon heating into weakly (250 nm in diameter) and strongly (15 nm in diameter) confining pores has been studied. A complex set of structures is observed, i.e., crystals, a solid layered mesophase, a nematic/smectic mesophase, and the isotropic melt. Interestingly, a rare crystal polymorph (form II) is also observed under strong confinement conditions together with the usual lamellar crystal form I. Furthermore, we show that nanoconfinement stabilizes form II: such crystals are still present at 210 °C while in the bulk they get converted to form I crystals at around 50 °C.

Growth of highly oriented deuterium crystals in silicon nanochannels

The structure of solid deuterium confined in 9 nm wide tubular silicon nanochannels has been studied by means of elastic neutron scattering techniques. As a result we report the formation of fcc D(2) as the stable solid phase in confinement in contrast to the hcp bulk structure. Further, a preferred alignment of D(2) nanocrystals with respect to the surrounding crystalline silicon matrix is discussed in terms of heteroepitaxial growth of solid D(2) on crystalline pore walls.

Arrays of aligned supramolecular wires by macroscopic orientation of columnar discotic mesophases

Structure formation, phase behavior, and dynamics of mono-bromo hexa-peri-hexabenzocoronene (HBC-Br) are strongly affected by the confinement of cylindrical nanopores with rigid walls. Using self-ordered nanoporous anodic aluminum oxide (AAO)-containing arrays of aligned nanopores with narrow size distribution as a confining matrix, pronounced alignment of the HBC-Br columns along the nanopore axes was found to be independent of the pore diameter. Hence, arrays of one-dimensional supramolecular HBC-Br wires with the columns uniformly oriented along the wire axes on a macroscopic scale were obtained, unlike with discotics bearing smaller cores. The formation of the crystalline herringbone structure is shifted to lower temperatures in nanopores with diameters of a few hundred nanometers, whereas the formation of this low-temperature phase is completely suppressed when the pore diameter is below 20 lattice parameters. Moreover, the cylindrical confinement affects the disk axial dynamics as well as the distribution of relaxation times.

Tuning and switching the hypersonic phononic properties of elastic impedance contrast nanocomposites

Anodic aluminum oxide (AAO) containing arrays of aligned cylindrical nanopores infiltrated with polymers is a well-defined model system for the study of hypersound propagation in polymer nanocomposites. Hypersonic phononic properties of AAO/polymer nanocomposites such as phonon localization and anisotropic sound propagation can be tailored by adjusting elastic contrast and density contrast between the components. Changes in density and elastic properties of the component located in the nanopores induced by phase transitions allow reversible modification of the phononic band structure and mode switching. As example in case, the crystallization and melting of poly(vinylidene difluoride) inside AAO was investigated.

Morphology controlled surface-assisted self-assembled microtube junctions and dendrites of metal free porphyrin-based semiconductor

Solution-vapor annealing of drop-cast thin films of meso-5,10,15,20-tetra-n-decylporphyrin H(2)T(C(10)H(21))(4)P deposited on SiO(2) substrate and quartz leads to the formation of well-defined self-assemblies. Their self-assembling properties in n-hexane vapor and chloroform vapor were comparatively investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD) technique, and IR and UV-vis spectroscopy. Intermolecular pi-pi interaction in cooperation with the van der Waals interaction of metal free porphyrin and solvent-solute interaction leads to the formation of microleaves and microtube dendrites in n-hexane vapor and chloroform vapor, respectively. Electronic absorption spectroscopic data on the self-assembled microstructures reveal the J-aggregate nature in both the microleaves and microtube dendrites. However, the difference in the shift of the Soret and Q bands for the two kinds of aggregates relative to corresponding solution absorption bands indicates the dependence of the solvent-porphyrin molecular interaction during the annealing self-assembly process, which counterbalances the intermolecular interactions, particularly the hydrophobic interaction between side chains. IR and XRD results clearly reveal the higher molecular ordering nature of microtube dendrites than that of microleaves, further confirming the effect of the solvent on tuning the intermolecular interaction and in turn the molecular packing mode in aggregates of porphryin compounds. The present results appear to represent the first example of orderly micrometer-sized tube junctions and dendrites of porphyrin prepared through a self-assembly process, providing an effective and new method toward the synthesis of complicated nanotubular structures. In addition, micrometer-sized leaves and tube dendrites were revealed to show good semiconductor features. Highly reproducible and sensitive gas response characteristics have also been observed in these microstructures.

Discotic molecules in cylindrical nanopores: a Monte Carlo study

We report Monte Carlo simulations of a model discotic molecule embedded in cylindrical pores. We consider a planar anchoring of the molecules on the surface for two different cylinder radii: R(*) = 5 and R(*) = 10 , in units of the molecular diameter. For both radii, we note that the system is progressively structured in concentric shells when decreasing the temperature. With the small radius, we observe continuous transitions from an isotropic to a nematic phase and then to a crystal one. The radius of the pores is sufficiently small to force the crystal to grow along their main axis. However some orientational discrepancies are observed: some samples present a zigzag configuration. With the big radius, the situation is more complex and it is likely that different scenarios are available. The crystals can be built along the main axis of the cylinders, as for the small radius, but also in any other direction. Thus we observe samples with different orientational domains. In the case of crystals oriented along the nanopore axis, we note that only the first 5 shells close to the wall are sensitive to it.

Template-based fabrication of SrTiO3 and BaTiO3 nanotubes

In response to the growing need for metal oxide nanotubes and nanowires for nanoelectronic applications, polycrystalline titanate nanotubes are synthesized in this work at near-ambient conditions without the application of an external electric field or pre-existing solids. Nanotubes of complicated metal oxides including strontium titanate and barium titanate are fabricated inside anodic aluminum oxide (AAO) templates from aqueous solutions using a simple, inexpensive, reproducible, and environmentally friendly procedure. The deposition solution is prepared by dissolving ammonium hexafluorotitanate and strontium nitrate in a boric acid solution at a pH of 2.5. The typical lengths of SrTiO(3) nanotubes are 5-30 microm, with an average diameter of approximately 250 nm, which is defined by the pore diameter of the AAO template. After annealing at 800 degrees C in air, the resulting nanotubes are polycrystalline cubic SrTiO(3). The Sr:Ti ratio in the nanotube is controlled by the hydrolysis of TiF(6)(2-) ions, and the concentration of Sr(2+) and stoichiometric SrTiO(3) nanotubes can be obtained. As an additional controlling factor, the surface properties of the AAO can be modified by (octadecyl)trichlorosilane. Barium titanate is also prepared in a similar manner with barium nitrate and ammonium hexafluorotitanate as precursors. The polycrystalline cubic BaTiO(3) nanotubes are 12-30 microm long and approximately 250 nm in diameter.