Photoelectrochemical detection of glutathione by IrO2-hemin-TiO2 nanowire arrays

Nitrodopamine modified MnO2 NS-MoS2QDs hybrid nanocomposite for the extracellular and intracellular detection of glutathione

We have developed a highly sensitive and reliable fluorescence resonance energy transfer (FRET) probe using nitro-dopamine (ND) and dopamine (DA) coated MnO2 nanosheet (ND@MnO2 NS and DA@MnO2 NS) as an energy acceptor and MoS2 quantum dots (QDs) as an energy donor. By employing surface-modified MnO2 NS, we can effectively reduce the fluorescence intensity of MoS2 QDs through FRET. It can reduce MnO2 NS to Mn2+ and facilitate the fluorescence recovery of the MoS2 QDs. This ND@MnO2 NS@MoS2 QD-based nanoprobe demonstrates excellent sensitivity to GSH, achieving an LOD of 22.7 nM in an aqueous medium while exhibiting minimal cytotoxicity and good biocompatibility. Moreover, our sensing platform shows high selectivity to GSH towards various common biomolecules and electrolytes. Confocal fluorescence imaging revealed that the nanoprobe can image GSH in A549 cells. Interestingly, the ND@MnO2 NS nanoprobe demonstrates no cytotoxicity in living cancer cells, even at concentrations up to 100 μg mL-1. Moreover, the easy fabrication and eco-friendliness of ND@MnO2 NS make it a rapid and simple method for detecting GSH. We envision the developed nanoprobe as an incredible platform for real-time monitoring of GSH levels in both extracellular and intracellular mediums, proving valuable for biomedical research and clinical diagnostics.

Lung cancer cells detection by a photoelectrochemical MoS2 biosensing chip

This research aims to explore the potential application of this approach in the production of biosensor chips. The biosensor chip is utilized for the identification and examination of early-stage lung cancer cells. The findings of the optical microscope were corroborated by the field emission scanning electron microscopy, which provided further evidence that the growth of MoS2 is uniform and that there is minimal disruption in the electrode, hence minimizing the likelihood of an open circuit creation. Furthermore, the bilayer structure of the produced MoS2 has been validated through the utilization of Raman spectroscopy. A research investigation was undertaken to measure the photoelectric current generated by three various types of clinical samples containing lung cancer cells, specifically the CL1, NCI-H460, and NCI-H520 cell lines. The findings from the empirical analysis indicate that the coefficient of determination (R-Square) for the linear regression model was approximately 98%. Furthermore, the integration of a double-layer MoS2 film resulted in a significant improvement of 38% in the photocurrent, as observed in the device's performance.

Modulating paired Ir-O-Ir via electronic perturbations of correlated Ir single atoms to overcome catalytic selectivity

Single-atom catalysts have been extensively utilized for electrocatalysis, in which electronic metal-support interactions are typically employed to stabilize single atoms. However, this neglects the metal-metal interactions of adjacent atoms, which are essential for the fine-tuning of selective sites. Herein, the high-loading of Ir single atoms (Ir SAs) (8.9 wt%) were adjacently accommodated into oxygen vacancy-rich Co3O4 nanosheets (Ir SAs/Co3O4). Electronic perturbations for both Ir single atoms and Co3O4 supports were observed under electronic metal-support and metal-metal interactions, thus generating Ir-O-Co/Ir units. Electrons were transferred from Co and Ir to O atoms, inducing the depletion of 3d/5d states in Co/Ir and the occupation of 2p states in O atoms to stabilize the Ir SAs. Moreover, the O atoms of Ir-O-Ir functioned as the main active sites for the electrocatalysis of As(iii), which reduced the energy barrier for the rate-determining step. This was due to the stronger electronic affinities for intermediates from reduction of As(iii), which were completely distinct from other coordinated O atoms of Co3O4 or IrO2. Consequently, the resultant Ir SAs/Co3O4 exhibited far more robust electrocatalytic activities than IrO2/Co3O4 and Co3O4 in the electrocatalysis of As(iii). Moreover, there was a strong orbital coupling effect between the coordinated O atoms of Ir SAs and the -OH of H3AsO3, thus exhibiting superior selectivity for As(iii) in contrast to other common heavy metal cations. This work offers useful insights into the rational design of intriguing SACs with high selectivity and stability for the electrocatalysis and electrochemical analysis of pollutants on an electronic level.

Bright Green-Emissive Carbon Nanodots for Sensing and Intracellular Imaging of Cu2+ and Glutathione

Green-emissive carbon nanodots (CDs) with high quantum yield are prepared. The abundant functional groups on the surfaces of CDs can selectively interact with Cu2+. The formed cupric amine complexes induce significant fluorescence quenching. The "on-off" switching can be further adjusted to the fluorescence "on" mode by the introduction of glutathione (GSH), which hinders the interactions between CDs and Cu2+. Based on the fantastic optical behavior of CDs, highly sensitive detection of Cu2+ and GSH can be achieved. Intracellular imaging of the two targets is also validated.

A novel colorimetric detection of glutathione based on stable free radical TEMPO oxidation of 3,3',5,5'-tetramethylbenzizine (TMB) via Copper(II) acetylacetonate catalysis

In this work, a new colorimetric method for the determination of Glutathione (GSH) on the basis of stable free radical 2,2,6,6 - tetramethylpiperidine - 1 - oxyl (TEMPO) oxidation of 3,3',5,5'-tetramethylbenzizine (TMB) via copper(II) acetylacetonate (Cu(acac)₂) catalysis was proposed. TEMPO was catalyzed by Cu(acac)₂ to produce TEMPO⁺, then TEMPO⁺ oxidized TMB to produce oxidized TMB (ox - TMB). The resulting ox - TMB showed blue and possessed a distinct absorption peak about 650 nm. Whereas, GSH prohibited the generation of ox - TMB through inhibiting TMB oxidation. As compared to the case that GSH was absent, significantly enhanced absorption was determined, and was proportional to GSH amount. On this basis, a qualitative and quantitative detection method of GSH with the naked eye and the microplate reader was achieved. The developed TEMPO - based method achieved GSH biosensing with improved sensitivity in a good specificity - manner. The limit of detection (LOD) was 90 μM via naked eye, and the microplate reader was 4.71 μM. And the stable free radical TEMPO possessed higher stability and lower toxicity than traditional oxidant of H₂O₂. Moreover, this TEMPO - based method achieved good results in the detection of GSH in human serums.

CdS-Modified TiO2 Nanotubes with Heterojunction Structure: A Photoelectrochemical Sensor for Glutathione

The formation of heterojunction structures can effectively prevent the recombination of photogenerated electron-hole pairs in semiconductors and result in the enhancement of photoelectric properties. Using TiO₂ nanotubes (prepared using the hydrothermal-impregnation method) as carriers, CdS-TiO₂NTs were fabricated as a photoelectrochemical (PEC) sensor, which can be used under visible light and can exhibit good PEC performance due to the existence of the heterojunction structure. The experimental results show that the prepared CdS-TiO₂NTs electrode had a linear response to 2-16 mM glutathione (GSH). The sensor's sensitivity and detection limit (LOD) were 102.9 µA·mM^-1 cm^-2 and 27.7 µM, respectively. Moreover, the biosensor had good stability, indicating the potential application of this kind of heterojunction PEC biosensor.

In-situ formation of MnO2 nanoparticles on Ru@SiO2 nanospheres as a fluorescent probe for sensitive and rapid detection of glutathione

Glutathione (GSH)-switched fluorescent assays have appealed much attention due to rapid signal changes of fluorescent probes. However, exposure to exterior environment of fluorescent probe causes photobleaching and premature leakage, leading to low sensitivity and poor photostability. Herein, luminescent SiO₂ nanoparticles encapsulated with Ru(bpy)₃²⁺ (Ru@SiO₂) were designed and synthesized as fluorescent probe to construct a GSH-switched fluorescent assay. The encapsulation of Ru(bpy)₃²⁺ in the SiO₂ nanoparticles could effectively prevent the leakage of Ru(bpy)₃²⁺ molecules, improving the photostability of probe. The fluorescence of Ru@SiO₂ nanoparticles was quenched by coating MnO₂ nanoparticles on Ru@SiO₂ surface (Ru@SiO₂@MnO₂ nanocomposites) through an in situ growth approach, which reduced background of the assay. The MnO₂ nanoparticles not only further inhibited the leakage of Ru(bpy)₃²⁺ molecules, but also could serve as a recognition unit of GSH. In the presence of GSH, the MnO₂ nanoparticles on the surface of Ru@SiO₂ nanoparticles were reduced to Mn²⁺, resulting the fluorescence recovery of Ru@SiO₂ nanoparticles. Thus, a signal-on fluorescent strategy was constructed for GSH detection. The assay displayed good analytical performance for GSH detection with a low detection limit of 16.2 nM due to excellent fluorescence quenching ability of MnO₂ nanoparticles and special role of Ru@SiO₂ nanoparticles to block probe leakage. The proposed assay was also applied to measure GSH levels in human serum samples. This work paves a new way to detect GSH with high sensitivity.

Ultrasensitive and Selective Detection of Glutathione by Ammonium Carbamate-Gold Platinum Nanoparticles-Based Electrochemical Sensor

Determining the concentration of glutathione is crucial for developing workable medical diagnostic strategies. In this paper, we developed an electrochemical sensor by electrodepositing amino-based reactive groups and gold–platinum nanomaterials on the surface of glassy carbon electrode successively. The sensor was characterized by cyclic voltammetry (CV), field emission scanning electron microscope (FESEM), energy dispersive X-ray spectroscopy (EDX), and electrochemical impedance spectra (EIS). Results showed that Au@Pt nanoparticles with the size of 20–40 nm were presented on the surface of electrode. The sensor exhibits excellent electrocatalytic oxidation towards glutathione. Based on this, we devised an electrochemical biosensor for rapid and sensitive detection of glutathione. After optimizing experimental and operational conditions, a linear response for the concentration of GSH, in the range of 0.1–11 μmol/L, with low detection and quantification limits of 0.051 μM (S/N = 3), were obtained. The sensor also exhibits superior selectivity, reproducibility, low cost, as well as simple preparation and can be applied in human serum sample detection.

Iridium and IrOx nanoparticles: an overview and review of syntheses and applications

Precious metals are key in various fields of research and precious metal nanomaterials are directly relevant for optics, catalysis, pollution management, sensing, medicine, and many other applications. Iridium based nanomaterials are less studied than metals like gold, silver or platinum. A specific feature of iridium nanomaterials is the relatively small size nanoparticles and clusters easily obtained, e.g. by colloidal syntheses. Progress over the years overcomes the related challenging characterization and it is expected that the knowledge on iridium chemistry and nanomaterials will be growing. Although Ir nanoparticles have been preferred systems for the development of kinetic-based models of nanomaterial formation, there is surprisingly little knowledge on the actual formation mechanism(s) of iridium nanoparticles. Following the impulse from the high expectations on Ir nanoparticles as catalysts for the oxygen evolution reaction in electrolyzers, new areas of applications of iridium materials have been reported while more established applications are being revisited. This review covers different synthetic strategies of iridium nanoparticles and provides an in breadth overview of applications reported. Comprehensive Tables and more detailed topic-oriented overviews are proposed in Supplementary Material, covering synthesis protocols, the historical role or iridium nanoparticles in the development of nanoscience and applications in catalysis.

Fully Automated Computational Approach for Precisely Measuring Organelle Acidification with Optical pH Sensors

pH balance and regulation within organelles are fundamental to cell homeostasis and proliferation. The ability to track pH in cells becomes significantly important to understand these processes in detail. Fluorescent sensors based on micro- and nanoparticles have been applied to measure intracellular pH; however, an accurate methodology to precisely monitor acidification kinetics of organelles in living cells has not been established, limiting the scope of this class of sensors. Here, silica-based fluorescent microparticles were utilized to probe the pH of intracellular organelles in MDA-MB-231 and MCF-7 breast cancer cells. In addition to the robust, ratiometric, trackable, and bioinert pH sensors, we developed a novel dimensionality reduction algorithm to automatically track and screen massive internalization events of pH sensors. We found that the mean acidification time is comparable among the two cell lines (ΔT_MCF-7 = 16.3 min; ΔT_MDA-MB-231 = 19.5 min); however, MCF-7 cells showed a much broader heterogeneity in comparison to MDA-MB-231 cells. The use of pH sensors and ratiometric imaging of living cells in combination with a novel computational approach allow analysis of thousands of events in a computationally inexpensive and faster way than the standard routes. The reported methodology can potentially be used to monitor pH as well as several other parameters associated with endocytosis.

Optical and Material Characteristics of MoS2/Cu2O Sensor for Detection of Lung Cancer Cell Types in Hydroplegia

In this study, n-type MoS₂ monolayer flakes are grown through chemical vapor deposition (CVD), and a p-type Cu₂O thin film is grown via electrochemical deposition. The crystal structure of the grown MoS₂ flakes is analyzed through transmission electron microscopy. The monolayer structure of the MoS₂ flakes is verified with Raman spectroscopy, multiphoton excitation microscopy, atomic force microscopy, and photoluminescence (PL) measurements. After the preliminary processing of the grown MoS₂ flakes, the sample is then transferred onto a Cu₂O thin film to complete a p-n heterogeneous structure. Data are confirmed via scanning electron microscopy, SHG, and Raman mapping measurements. The luminous energy gap between the two materials is examined through PL measurements. Results reveal that the thickness of the single-layer MoS₂ film is 0.7 nm. PL mapping shows a micro signal generated at the 627 nm wavelength, which belongs to the B2 excitons of MoS₂ and tends to increase gradually when it approaches 670 nm. Finally, the biosensor is used to detect lung cancer cell types in hydroplegia significantly reducing the current busy procedures and longer waiting time for detection. The results suggest that the fabricated sensor is highly sensitive to the change in the photocurrent with the number of each cell, the linear regression of the three cell types is as high as 99%. By measuring the slope of the photocurrent, we can identify the type of cells and the number of cells.

Iron Single-Atom Catalysts Boost Photoelectrochemical Detection by Integrating Interfacial Oxygen Reduction and Enzyme-Mimicking Activity

The investigations on the generation, separation, and interfacial-redox-reaction processes of the photoinduced carriers are of paramount importance for realizing efficient photoelectrochemical (PEC) detection. However, the sluggish interfacial reactions of the photogenerated carriers, combined with the need for appropriate photoactive layers for sensing, remain challenges for the construction of advanced PEC platforms. Here, as a proof of concept, well-defined Fe single-atom catalysts (Fe SACs) were integrated on the surface of semiconductors, which amplified the PEC signals via boosting oxygen reduction reaction. Besides, Fe SACs were evidenced with efficient peroxidase-like activity, which depresses the PEC signals through the Fe SACs-mediated enzymatic precipitation reaction. Harnessing the oxygen reduction property and peroxidase-like activity of Fe SACs, a robust PEC sensing platform was successfully constructed for the sensitive detection of acetylcholinesterase activity and organophosphorus pesticides, providing guidelines for the employment of SACs for sensitive PEC analysis.

Morphology-oxygen evolution activity relationship of iridium(iv) oxide nanomaterials

This work demonstrated shape tuning of IrO2 nanoparticles to nanocube and nanorods in molten salt and demonstrated the exemplary performance of IrO2 nanorods as an electrocatalyst for oxygen evolution reaction even surpassing commercial IrO2.

Recent advances in electron manipulation of nanomaterials for photoelectrochemical biosensors

This feature article discusses the recent advances and strategies of building photoelectrochemical (PEC) biosensors from the perspective of regulating the electron transfer of nanomaterials.

Flexible photoelectrochemical biosensor for ultrasensitive microRNA detection based on concatenated multiplex signal amplification

Precise microRNA (miRNA) analysis is significant importance for early disease diagnosis. Herein, a novel flexible photoelectrochemical (PEC) biosensor for miRNA determination was developed by employing CdS NPs-modified carbon cloth (CC) on polyimide (PI) film as photoelectric material to provide the PEC responses and an efficient four-stage reaction system as the target recognition and signal amplification unit to improve the analytical performance. In this PEC biosensor, the presence of target miR-21 would trigger the catalytic hairpin assembly (CHA) and the following hybridization chain reaction (HCR) to produce a long dsDNA labeled with numerous biotins, which would further capture a large amount of alkaline phosphatase (ALP) for catalyzing the generation of ascorbic acid (AA). As an efficient electron donor, AA could be oxidized by the photoelectrode, which would initiate a redox cycling amplification process to regenerate AA, resulting in the enhancement of the photocurrent response. Benefitting from the synergistic nucleic acid-based, enzyme catalytic, and chemical signal amplification strategies, the proposed biosensing strategy enabled ultrasensitive miRNA determination. As expected, the PEC biosensor performed satisfactory analytical performances with a linear range of 1 fM to 1 nM and the detection limit down to 0.41 fM. Furthermore, the PEC biosensing strategy exhibited recommendable selectivity, stability, flexibility, and practical applicability. Therefore, this sensing platform provides promising potential for application in bioassay and early diagnosis of disease.

Rational Utilization of Photoelectrochemistry of Photosystem II for Self-Powered Photocathodic Detection of MicroRNA in Cells

The photoanode, photosystem II (PSII)/hierarchical inverse opal (IO) TiO₂, is coupled to the complementary photocathode, PbS quantum dots (QDs)/DNA probes, which is then integrated into a two-compartment photoelectrochemical (PEC) cell to achieve a self-powered system to enable photocathodic detection of microRNA-10b from HeLa cells. In such a system, all of the PSII catalytic products, i.e., electrons, protons, and O₂, were rationally utilized and could overcome the general issue of varied O₂ levels in photocathodic detection. The correlation between the target-triggered formation of the DNA complexes and the catalytic reduction of the dissolved O₂ makes possible the steady microRNA-10b detection with good sensitivity and selectivity. This work has unveiled the ability of PSII to construct self-powered detecting devices and shed light on its application in new arenas.

Nanowire-based sensor electronics for chemical and biological applications

Detection and recognition of chemical and biological species via sensor electronics are important not only for various sensing applications but also for fundamental scientific understanding. In the past two decades, sensor devices using one-dimensional (1D) nanowires have emerged as promising and powerful platforms for electrical detection of chemical species and biologically relevant molecules due to their superior sensing performance, long-term stability, and ultra-low power consumption. This paper presents a comprehensive overview of the recent progress and achievements in 1D nanowire synthesis, working principles of nanowire-based sensors, and the applications of nanowire-based sensor electronics in chemical and biological analytes detection and recognition. In addition, some critical issues that hinder the practical applications of 1D nanowire-based sensor electronics, including device reproducibility and selectivity, stability, and power consumption, will be highlighted. Finally, challenges, perspectives, and opportunities for developing advanced and innovative nanowire-based sensor electronics in chemical and biological applications are featured.

Electrochemical biosensor based on singlet oxygen generated by molecular photosensitizers

Here a sensing strategy with the integration of photosensitizer and electrochemical analysis was present. The photosensitizer, Zinc(II) tetraphenylporphyrin (ZnTCPP), was functionalized graphene oxide (GO) to form complex (ZnTCPP/GO) as the electrode material and generated singlet-oxygen (¹O₂) in the presence of air under light illumination. Due to the special electronic structure of ¹O₂, hydroquinone (HQ) could react with ¹O₂ to produce electrochemically-detectable products, benzoquinone (BQ). Meanwhile, the formed BQ could be reduced on the electrode, completing the redox cycling. The ZnTCPP/GO modified ITO electrode produces a stable and enhanced photocurrent signal under 420 nm irradiation in air-saturated buffer, compared with in N₂-saturated buffer. On the other hand, l-glutathione (GSH) as a signalling molecule plays important role in physiological process, which was employed as model to investigated the sensing performance. Coupling with HQ oxidized by ¹O₂, a GSH sensor was constructed on the basis the redox cycling of HQ. A sensitive reduction of photocurrent is observed with the addition of GSH, due to the GSH could be oxidized by the generated ¹O₂ to form GSSG. The biosensor displayed good performance in a broad concentration range of 0-150 μM, with a lower detection limit of 1.3 μM at an S/N ratio of 3, and could be used in practical application. This work affords a platform for constructing the biosensor with ¹O₂ instead of enzyme via on/off light switching.

Methylene blue embedded duplex DNA as an efficient signal stimulator of petal-like BiVO4 for ultrasensitive photoelectrochemical bioassay

Conventionally, the photoelectrochemistry relies on freely diffusive signal molecules in solution to stimulate the photocurrent output, leading to limited sensing strategies. Herein, we showcase the methylene blue (MB) embedded duplex DNA for efficient signal stimuli and its application for ultrasensitive photoelectrochemical (PEC) bioassay. Specifically, the MB embedded duplex DNA scavenged the photogenerated holes of petal-like BiVO₄ efficiently, and thus greatly augmented the anodic photocurrent output. Taking the miRNA-21 as a model target, whose biorecognition reaction was aided by the rolling circle amplification (RCA) reaction to finally produce an amplified amount of double-stranded DNA (dsDNA) with embedded MB on the photoelectrode's surface, a "label-free" and "signal-on" PEC biosensing platform was implemented with ultra-sensitivity and high selectivity. The proposed strategy could detect miRNA-21 in the concentration range of 5.0 fM to 10 nM, with the detection limit as low as 0.3 fM. This work opens up the utilization of redox substance intercalated duplex DNA for an efficient signal stimulator, which hints the prospect of other more intercalators embedded DNA for versatile biosensing purposes. Importantly, considering the large quantities of bioreactions that involve duplex DNA as reactants/products, the developed signal transduction strategy may further find wide applications in bioanalysis for targeting more analytes.

Photoelectrochemical analysis of the alkaline phosphatase activity in single living cells

Conventional photoelectrochemical (PEC) analysis mostly utilizes photoactive material modified planar indium tin oxides (ITOs) to obtain photocurrent responses for the measurement of analytes in solution. In this work, a CdS quantum dot (QD) modified nanopipette was prepared for the PEC analysis of the alkaline phosphatase (ALP) activity in single MCF-7 cells. The nanopipette was filled with ascorbic acid 2-phosphate (AAP) that was egressed outside the nanopipette by electrochemical pumping. Next, AAP was catalyzed by ALP to generate ascorbic acid (AA), which is an efficient electron donor for CdS QDs under illumination. Based on the result that the nanopipette showed a linear photocurrent response to AA, a nearly linear correlation between the photocurrent and the activity of ALP was established. Accordingly, using these CdS QD modified nanopipettes, the ALP activity in single MCF-7 cells was determined to be 0.12 U mL^-1 by PEC analysis. This work does not expand the application of PEC bioanalysis, but offers a new strategy for single cell analysis.

Light in Electrochemistry

Electrochemistry represents an important analytical technique used to acquire and assess chemical information in detail, which can aid fundamental investigations in various fields, such as biological studies. For example, electrochemistry can be used as simple and cost-effective means for bio-marker tracing in applications, such as health monitoring and food security screening. In combination with light, powerful spatially-resolved applications in both the investigation and manipulation of biochemical reactions begin to unfold. In this article, we focus primarily on light-addressable electrochemistry based on semiconductor materials and light-readable electrochemistry enabled by electrochemiluminescence (ECL). In addition, the emergence of multiplexed and imaging applications will also be introduced.

Donor-Acceptor Compensated ZnO Semiconductor for Photoelectrochemical Biosensors

Hindering the recombination of a photogenerated carrier is a crucial method to enhance the photoelectrochemical performance of ZnO due to its high exciton binding energy. Herein, the intramolecular donor-acceptor compensated semiconductor ZnO (I-D/A ZnO), introducing C dopants and oxygen vacancies, was prepared with the assistance of ascorbic acid (AA). According to the DFT calculations, the asymmetry DOS could lead to the longer carrier lifetime and the smaller electron transfer resistance. Then, the photoelectrochemical biosensor toward glucose was regarded as a model to discuss the application of ZnO in biosensors. As a result, the biosensor based on I-D/A ZnO showed good performance with high sensitivity, low limit of detection, and fine anti-interference, meaning that I-D/A ZnO is a promising semiconductor for photoelectrochemical biosensors.

Enzymatic photoelectrochemical bioassay based on hierarchical CdS/NiO heterojunction for glucose determination

The design and development of a 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis is introduced. Specifically, NiO nanoflakes (NFs) were in situ formed on carbon fibers via a facile liquid-phase deposition method followed by an annealing step and subsequent integration with CdS quantum dots (QDs). The glucose oxidase (GOx) was then coated on the photocathode to allow the determination of glucose. Under 5 W 410 nm LED light and at a working voltage of 0.0 V (vs. Ag/AgCl), this method can assay glucose concentrations down to 1.77×10^-9 M. The linear range was 5×10^-7 M to 1×10^-3 M, and the relative standard deviation (RSD) was below 5%. The photocathodic biosensor achieved target detection with high sensitivity and selectivity. This work is expected to stimulate more passion in the development of innovative hierarchical heterostructures for advanced self-powered photocathodic bioanalysis. Design of 3D hierarchical CdS/NiO heterojunction and its application in a self-powered cathodic photoelectrochemical (PEC) bioanalysis.

An ultrasensitive colorimetric and fluorescence dual-readout assay for glutathione with a carbon dot-MnO2 nanosheet platform based on the inner filter effect

An ultrasensitive colorimetric and fluorescence dual-readout assay based on the inner filter effect (IFE) was developed for glutathione (GSH) determination, in which carbon dots (C-dots) were used as a fluorophore and MnO₂ nanosheets as an absorber. Due to the excellent optical absorption properties of MnO₂ nanosheets and the good spectral overlap between the fluorophore and absorber, MnO₂ nanosheets could effectively quench the fluorescence of C-dots via the IFE. As the target, GSH could reduce MnO₂ nanosheets to Mn²⁺ ions, which inhibited the IFE and resulted in the fading of solution color and the recovery of the fluorescence signal. And these two kinds of signals were respectively used for qualitative and quantitative detection of GSH. The results showed that this proposed assay could distinguish 10 μM GSH with the naked eye and quantitatively detect GSH within the concentration range of 0.1–400 μM. The limit of detection was 6.6 nM. Moreover, this assay showed sensitive responses in human serum and urine samples, which indicated that this IFE-based assay has great potential in GSH-related clinical and bioanalytical applications.

An ultrasensitive colorimetric and fluorescence dual-readout assay based on carbon dot–MnO₂ nanosheets platform was developed for GSH detection in human body fluid samples.

A highly sensitive photoelectrochemical aptasensor based on BiVO4 nanoparticles-TiO2 nanotubes for detection of PCB72

In this work, a simple and highly sensitive photoelectrochemical (PEC) aptasensor has been developed for detecting PCB72 based on TiO₂ nanotubes (NTs) decorated with BiVO₄ nanoparticles (NPs). The BiVO₄ NPs-TiO₂ NTs composites prepared through a simple hydrothermal method exhibit good visible-light adsorption ability, high PEC response and perfect photo-excited stability. The synthesized composites were explored as the photoactive sensing materials for development of a PEC sensing platform for the first time. Here, Au nanoparticles (NPs) were first deposited the composites, and the anti-PCB72 aptamer molecules were immobilized on the Au NPs-deposited BiVO₄ NPs-TiO₂ NTs. The developed PEC aptasensor exhibits high sensitivity and specificity for PCB72 with a wide linear range from 1 ng/L to 500 ng/L and a low detection limit of 0.23 ng/L. The application of the aptasensor was evaluated by determining PCB 72 in the environment water samples. Thus, a simple and efficient PEC sensing platform was established for detecting the content of PCBs in the environment.

Characteristics of P-Type and N-Type Photoelectrochemical Biosensors: A Case Study for Esophageal Cancer Detection

P-type and N-type photoelectrochemical (PEC) biosensors were established in the laboratory to discuss the correlation between characteristic substances and photoactive material properties through the photogenerated charge carrier transport mechanism. Four types of human esophageal cancer cells (ECCs) were analyzed without requiring additional bias voltage. Photoelectrical characteristics were examined by scanning electron microscopy (SEM), X-ray diffraction (XRD), UV–vis reflectance spectroscopy, and photocurrent response analyses. Results showed that smaller photocurrent was measured in cases with advanced cancer stages. Glutathione (L-glutathione reduced, GSH) and Glutathione disulfide (GSSG) in cancer cells carry out redox reactions during carrier separation, which changes the photocurrent. The sensor can identify ECC stages with a certain level of photoelectrochemical response. The detection error can be optimized by adjusting the number of cells, and the detection time of about 5 min allowed repeated measurement.

Gold-Modified Micellar Composites as Colorimetric Probes for the Determination of Low Molecular Weight Thiols in Biological Fluids Using Consumer Electronic Devices

This work describes a new, low-cost and simple-to-use method for the determination of free biothiols in biological fluids. The developed method utilizes the interaction of biothiols with gold ions, previously anchored on micellar assemblies through electrostatic interactions with the hydrophilic headgroup of cationic surfactant micelles. Specifically, the reaction of AuCl4− with the cationic surfactant cetyltrimethyl ammonium bromide (CTAB) produces an intense orange coloration, due to the ligand substitution reaction of the Br− for Cl− anions, followed by the coordination of the AuBr4− anions on the micelle surface through electrostatic interactions. When biothiols are added to the solution, they complex with the gold ions and disrupt the AuBr4−–CTAB complex, quenching the initial coloration and inducing a decrease in the light absorbance of the solution. Biothiols are assessed by monitoring their color quenching in an RGB color model, using a flatbed scanner operating in transmittance mode as an inexpensive microtiter plate photometer. The method was applied to determine the biothiol content in urine and blood plasma samples, with satisfactory recoveries (i.e., >67.3–123% using external calibration and 103.8–115% using standard addition calibration) and good reproducibility (RSD < 8.4%, n = 3).

Review of the Mechanism of Nanocarriers and Technological Developments in the Field of Nanoparticles for Applications in Cancer Theragnostics

Cancer cannot be controlled by the usage of drugs alone, and thus, nanotechnology is an important technique that can provide the drug with an impetus to act more effectively. There is adequate availability of anticancer drugs that are classified as alkylating agents, hormones, or antimetabolites. Nanoparticle (NP) carriers increase the residence time of the drug, thereby enhancing the survival rate of the drug, which otherwise gets washed off owing to the small size of the drug particles by the excretory system. For example, for enhancing the circulation, a coating of nonfouling polymers like PEG and dextran is done. Famous drugs such as doxorubicin (DOX) are commonly encapsulated inside the nanocomposite. The various classes of nanoparticles are used to enhance drug delivery by aiding it to fight against the tumor. Targeted therapy aims to attack the cells with features common to the cancer cells while minimizing damage to the normal cell, and these therapies work in one in four ways. Some block the cancer cells from reproducing newer cells, others release toxic substances to kill the cancer cells, some stimulate the immune system to destroy the cancer cells, and some block the growth of more blood vessels around cancer cells, which starve the cells of the nutrients, which is needed for their growth. This review aims to testify the advancements nanotechnology has brought in cancer therapy, and its statements are supported with recent research findings and clinical trial results.

Interfacial Charge Transport in 1D TiO2 Based Photoelectrodes for Photoelectrochemical Water Splitting

1D nanostructured photoelectrodes are promising for application as photoelectrochemical (PEC) devices for solar energy conversion into hydrogen (H₂ ) owing to the optical, structural, and electronic advantages. Titanium dioxide (TiO₂ ) is the most investigated candidate as a photoelectrode due to its good photostability, low production cost, and eco-friendliness. The obstacle for TiO₂ 's practical application is the inherent wide bandgap (UV-lights response), poor conductivity, and limited hole diffusion length. Here, a comprehensive review of the current research efforts toward the development of 1D TiO₂ based photoelectrodes for heterogeneous PEC water splitting is provided along with a discussion of nanoarchitectures and energy band engineering influences on interfacial charge transfer and separation of 1D TiO₂ composited with different dimensional photoactive materials. The key focus of this review is to understand the charge transfer processes at interfaces and the relationship between photogenerated charge separation and photoelectrochemical performance. It is anticipated that this review will afford enriched information on the rational designs of nanoarchitectures, doping, and heterojunction interfaces for 1D TiO₂ based photoelectrodes to achieve highly efficient solar energy conversion.

Single-Atom-Based Heterojunction Coupling with Ion-Exchange Reaction for Sensitive Photoelectrochemical Immunoassay

Benefiting from the maximum atom-utilization efficiency and distinct structural features, single-atom catalysts open a new avenue for the design of more functional catalysts, whereas their bioapplications are still in their infancy. Due to the advantages, platinum single atoms supported by cadmium sulfide nanorods (Pt SAs-CdS) are synthesized to build an ultrasensitive photoelectrochemical (PEC) biosensing platform. With the decoration of Pt SAs, the PEC signal of CdS is significantly boosted. Furthermore, theory calculations indicate the positively charged Pt SAs could change the charge distribution and increase the excited carrier density of CdS. Meanwhile, it also suggests that Cu²⁺ can severely hinder the photoexcitation and electron-hole separation of CdS. As a proof of concept, prostate-specific antigen is chosen as the target analyte to demonstrate the superiority of the Pt SAs-CdS-based PEC sensing system. As a result, the PEC biosensor based on Pt SAs-CdS exhibits outstanding detection sensitivity and promising applicability.

A water-stable zinc(ii)–organic framework as an “on–off–on” fluorescent sensor for detection of Fe3+ and reduced glutathione

A zinc(ii) metal–organic framework exhibits fluorescence on–off–on behaviour for Fe³⁺ and reduced glutathione in PBS solution and in real samples.

Recent Advances in the Construction of Flexible Sensors for Biomedical Applications

The fabrication of flexible sensors is a potential way to promote the progress of modern social science and technology due to their wide applications in high-performance electronic equipment and devices. Flexible sensors based on organic materials combine the unique advantages of flexibility and low cost, increasing interest in healthcare monitoring, treatment, and human-machine interfaces. Advances in materials science and biotechnology have rapidly accelerated the development of bio-integrated multifunctional sensors and devices. Due to their excellent mechanical and electrical properties, many types of functional materials provided benefits for the construction of various sensors with improved flexibility and stretchability. In this review, recent advance in the fabrication of flexible sensors by using functional nanomaterials including nanoparticles, carbon materials, metal-organic materials, and polymers is presented. In addition, the potential biomedical applications of the fabricated flexible sensors for detecting gas molecules signals, small molecules, DNA/RNA, proteins, others are introduced and discussed.

CdS Quantum-Dots-Decorated V2O5 Nanosheets as Chemically Etchable Active Materials for Sensitive Photoelectrochemical Immunoassay of Carcinoembryonic Antigen

We report here CdS quantum-dots (QDs)-decorated V₂O₅ nanosheets as high-performance and chemically etchable photoelectric active materials for constructing a photoelectrochemical (PEC) immunoassay platform. CdS QDs-decorated V₂O₅ nanosheets as new photoelectric materials can show superior photocurrent to V₂O₅ nanosheets and CdS QDs under visible-light irradiation because of the promoted photogenerated electron-hole separation and the increased visible-light absorption. V₂O₅ nanosheets can be etched by ascorbic acid (AA) because of the reduction of V₂O₅ to V⁴⁺, and the photocurrent of CdS/V₂O₅-nanocomposite-modified indium tin oxide electrode decreases significantly after being etched by AA. Inspired by this phenomenon, a PEC immunoassay platform is constructed for carcinoembryonic antigen (CEA) detection by using CdS/V₂O₅ nanocomposite as the photoelectric material and AA-encapsulated liposome immunonanocapsules as labels. The linear detection range for detecting CEA is from 0.5 pg mL^-1 to 1 ng mL^-1, with a limit of detection of 0.1 pg mL^-1. The proposed method also shows good selectivity, excellent reproducibility, and satisfactory recovery in detection of CEA in human serum samples. We believe that this work will lay the foundation for the future development of V₂O₅-based materials for PEC analysis, and also provide a reasonable design and implementation for the development of PEC immunoassay.

Cu2O/PEDOT:PSS/ZnO Nanocomposite Material Biosensor for Esophageal Cancer Detection

A highly sensitive photoelectrochemical (PEC) biosensor without external bias was developed in this study. The biosensor was configured with a p-Cu₂O and n-ZnO heterostructure. Hexamethylenetetramine (HMTA) and poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) was used to improve the crystal structure of Cu₂O and ZnO and reduce the defects in the Cu₂O/ZnO interface. This fabrication method provided the highly crystallized Cu₂O/ZnO structure with excellent electrical property and photoresponse in visible light. The structure was applied to a biosensor for detecting two different cancerous levels of esophageal cells, namely, OE21 and OE21-1, with a high gain in photocurrent (5.8 and 6.2 times, respectively) and a low detection limit (3000 cells in 50 μL). We believe that such a p-n heterojunction PEC biosensor could advance biosensor development and provide a promising candidate for biomedical applications.

3D hollow-out TiO2 nanowire cluster/GOx as an ultrasensitive photoelectrochemical glucose biosensor

Ultra-high sensitivity is difficult to achieve using conventional enzymatic glucose biosensors due to the lack of exposed active sites and steric-hinderance effects. Thus, in the present study, we report a photoelectrochemical (PEC) enzymatic glucose biosensor based on 3-dimensional (3D) hollow-out titanium dioxide (TiO₂) nanowire cluster (NWc)/glucose oxidase (GOx), providing more number of exposed active sites, thus constructing a sensor with a higher affinity toward glucose reaction. Excellent performance with an ultra-high sensitivity of 58.9 μA mM^-1 cm^-2 and 0-2 mM linear range with a determination limit of 8.7 μM was obtained for the detection of glucose. This study might provide a new approach to expose active sites efficiently for remarkable photoelectrochemical performances.

Platinum and Iridium Oxide Co-modified TiO2 Nanotubes Array Based Photoelectrochemical Sensors for Glutathione

Oriented TiO₂ nanotubes, which are fabricated by anodic oxidation method, are prospective in photoelectrochemical analysis and sensors. In this work, Pt and IrO₂ co-modified TiO₂ nanotubes array was prepared via a two-step deposition process involving the photoreductive deposition of Pt and chemical deposition of IrO₂ on the oriented TiO₂ nanotubes. Due to the improved separation of photo-generated electrons and holes, Pt-IrO₂ co-modified TiO₂ nanotubes presented significantly higher PEC activity than pure TiO₂ nanotubes or mono-modified TiO₂ nanotubes. The PEC sensitivity of Pt-IrO₂ co-modified TiO₂ nanotubes for glutathione was also monitored and good sensitivity was observed.

Photovoltaic Counter Electrodes: An Alternative Approach to Extend Light Absorption Spectra and Enhance Performance of Dye-Sensitized Solar Cells

If counter electrodes (CEs) could also contribute to light harvesting in dye-sensitized solar cells (DSSCs), then the power conversion efficiency (PCE) of DSSCs would be further boosted without changing the device structure. Nearly monodispersed Ag₂ Se nanocrystals with a bandgap of 1.62 eV (∼765 nm) were synthesized via a one-pot process, and Ag₂ Se CEs were fabricated by using a spin-coating and annealing process. Incident photon-to-current conversion efficiency and photocurrent spectra indicated that Ag₂ Se CEs can generate the electricity by harvesting more visible light, which could not be absorbed by dye-sensitized photoanodes. Thus, compared to Pt CE (7.57 %), the DSSC based on Ag₂ Se CE exerted a higher PCE of 8.06 %. The development of photovoltaic CEs may offer an alternative way to promote the performance and competitiveness of DSSCs.

Synthesis of Carbon Dots and their Application as Turn Off-On Fluorescent Sensor for Mercury (II) and Glutathione

In this paper, we present a new method for the detection of mercury (II) and glutathione using carbon dots as fluorescent sensor. The synthesized carbon dots have the advantages of simple manipulation, low cost and the high fluorescence quantum yield of them which was22.79%. The combination of mercury (II) and carbon dots caused the turn off of carbon dots fluorescence. With the reaction between mercury (II) and glutathione, the carbon dots were released and the fluorescence was turned on when the glutathione added. According to this, the carbon dots could be developed to detect mercury (II) and glutathione specifically, and the detection limit of mercury (II) is as low as 0.41 μM.

Sensitive photoelectrochemical immunoassay of Staphylococcus aureus based on one-pot electrodeposited ZnS/CdS heterojunction nanoparticles

We report here a facile synthesis of ZnS/CdS heterojunction nanoparticles on an indium-tin oxide (ITO) electrode and their application in the ultrasensitive photoelectrochemical detection of Staphylococcus aureus (S. aureus). The ZnS/CdS/ITO electrode was prepared using one-pot electrodeposition in an acidic solution containing ZnCl2, CdCl2 and Na2S2O3. The optimal ZnS/CdS heterojunction nanoparticles with a Zn/Cd atomic ratio of 1 : 1 showed a high photoelectrochemical response to l-cysteine. l-Cysteine-encapsulated liposome (cysteine@liposome) immunonanocapsules were prepared and used as the labels for photoelectrochemical detection of S. aureus. By coupling cysteine@liposome immunonanocapsule labeling with immunomagnetic separation/enrichment and photoelectrochemical analysis using the ZnS/CdS/ITO electrode, sensitive photoelectrochemical detection of S. aureus was achieved. Under optimal conditions, the linear range for photoelectrochemical detection of S. aureus was from 1 to 4000 CFU mL-1. The proposed method was successfully used for photoelectrochemical detection of S. aureus in milk and juice samples.