Enhancing Bidirectional Electron Transfer of Shewanella oneidensis by a Synthetic Flavin Pathway

Harnessing CO2 for sustainable bioelectricity: An engineered two-stage microbial co-culture approach with enhanced acetate metabolism

Climate change driven by rising atmospheric CO2 levels underscores the urgent need for sustainable energy solutions. This study investigates the dual potential of CO2 as a primary carbon source and acetate as an intermediate to simultaneously mitigate atmospheric CO2 levels and generate bioelectricity using microbial fuel cells (MFCs). A synthetic microbial co-culture was developed, combining Clostridium ljungdahlii for CO2 sequestration and Shewanella oneidensis MR-1 for bioelectricity production. To optimize MFC performance, S. oneidensis was modularly engineered to enhance acetate metabolism and electron transfer efficiency. Key modifications included upregulating ATP synthesis, introducing an ATP-independent acetate metabolic pathway, increasing NADH availability, and optimizing pili-based artificial conductive nanowires. These advancements achieved a maximum cell density (OD600 = 0.611), a record output voltage of 351.3 mV, and a record power density of 94.9 mW/m2 using acetate as the substrate. Furthermore, a two-stage biocatalytic system utilizing CO2 as the primary carbon source yielded an output voltage of 209.3 mV and a power density of 65.0 mW/m2. These results highlight the potential of engineered microbial co-culture for efficient CO2-based bioelectricity generation, offering a scalable and sustainable pathway toward carbon-neutral energy production.

Proton motive force generated by microbial rhodopsin promotes extracellular electron transfer

The primary limitation to the practicability of electroactive microorganisms in bioelectrochemical systems lies in their low extracellular electron transfer (EET) efficiency. The proton motive force (PMF) represents the electrochemical gradient of protons generated by electron transport and proton pumping across the cytoplasmic membrane, serving as a crucial energy transfer pathway in bacterial membranes. Nevertheless, the impact of PMF on the EET efficiency remains ambiguous, while the microbial rhodopsin offers a simple and efficient avenue for non-photosynthetic cells to harness PMF. Here, we studied the function of three microbial rhodopsins (Arch, Mac, and cR-1) in facilitating EET via their heterologous expression in S. oneidensis, a model electroactive microorganism. Among these, the recombinant strain expressing rhodopsin cR-1 exhibited the highest output power density of 0.87 W/m2, 3.49-fold increase over the wild-type S. oneidensis MR-1. Our further transcriptomics analyses of the energy and materials metabolism of strain cR-1 showed that the underlying mechanism of enhanced EET efficiency was resulted from heterologous expression of the light-driven proton pump. The results suggested that strain cR-1 effectively expels protons to generate additional PMF and provide extra ATP supply to the cells, which facilitated lactate uptake and utilization, thus enhancing electrons generation in cells. This augmented intracellular electron pool capacity ultimately resulted in enhancement of EET rate and power generation efficiency of the recombinant S. oneidensis.

Extracellular electron transfer proteins contribute to reduction of ferric minerals by Geobacter biofilms

To investigate how the thickness and extracellular electron transfer (EET) capabilities of microbial biofilms influence the reduction of ferric iron [Fe(III)]-containing minerals, we utilized four strains of Geobacter sulfurreducens with varying biofilm thicknesses and EET capabilities. These strains were engineered by modulating intracellular levels of dinucleotide second messengers. We systematically investigated the capacity of biofilms formed by four strains to reduce different Fe(III)-containing minerals including ferrihydrite, goethite, and lepidocrocite. By growing the G. sulfurreducens biofilm on the Fe(III) mineral-coated slides, our results showed that the strains forming thin biofilms on surfaces of Fe(III) minerals exhibited faster Fe(III) reduction rates compared to those with thick biofilms. Transcriptomic analyses revealed the upregulation of the genes encoding bacterial EET-involved proteins in the thin biofilms, highlighting the significant role of these proteins in reducing Fe(III)-containing minerals by G. sulfurreducens biofilms. Furthermore, genetic characterization identified the participation of two novel c-type cytochromes (c-Cyts), GSU1996 and GSU2513, in the reduction of Fe(III)-containing minerals by G. sulfurreducens biofilms. The results from this study provide an improved understanding of mineral-microbe interaction.IMPORTANCEGeobacter is a predominant species within biofilm communities that facilitate iron reduction, a process essential for the biogeochemical cycling of iron and other elements. However, the specific properties of Geobacter biofilms crucial for iron reduction remain unclear. By manipulating intracellular levels of dinucleotide second messengers to generate strains with varying biofilm properties, this research reveals that thinner biofilms exhibit superior rates of ferric iron [Fe(III)] mineral reduction compared to thicker biofilms. This finding highlights the vital role of proteins involved in extracellular electron transfer (EET) in enhancing the reduction of Fe(III)-containing minerals. The study further identifies two novel c-type cytochromes, GSU1996 and GSU2513, as important contributors to this process. These discoveries not only advance our understanding of microbial iron reduction but also offer new perspectives on the interactions between biofilms and mineral surfaces, potentially informing future research and applications in biogeochemical cycling and bioenergy.

Sensitive and Broadly Compatible Transcription Factor-Based Biosensor for Monitoring c-di-GMP Dynamics in Biofilms

Biofilms are ubiquitous and have many negative effects, for example, in infections or biocorrosion. Given the critical role of the second messenger cyclic di-GMP (c-di-GMP) in biofilm formation, targeting a reduction in intracellular concentrations of c-di-GMP is believed to be a key aspect in the development of biofilm mitigation strategies. To facilitate this effort, here, we developed a transcription factor (TF)-based biosensor that integrates the TF FleQ from Pseudomonas aeruginosa with a PR-Ppel tandem promoter. The dynamic range of the biosensor was optimized by fine-tuning the TF expression. The biosensor exhibited broad compatibility and effectiveness in detecting decreases in c-di-GMP levels across various biofilm model organisms, including strains lacking FleQ or its homologues, such as Escherichia coli, Shewanella oneidensis, Comamonas testosteroni, and Acinetobacter baumannii, as well as P. aeruginosa containing FleQ. Additionally, we monitored c-di-GMP levels in biofilms formed by P. aeruginosa and S. oneidensis through a ratiometric, image-based quantification method. The methodology used the green fluorescence protein (GFP) as a reporter for c-di-GMP levels and 4',6-diamidino-2-phenylindole (DAPI) or the monomeric red fluorescence protein (mRFP) as the indicator for biofilm biomass. The GFP/DAPI or GFP/mRFP ratio gives effective c-di-GMP per unit of biomass. This TF-based biosensor provides an important tool to study c-di-GMP dynamics, which facilitates efforts in developing biofilm control strategies and understanding regulatory networks for biofilm development.

Unlocking the potential of Shewanella in metabolic engineering: Current status, challenges, and opportunities

Shewanella species are facultative anaerobes with distinctive electrochemical properties, making them valuable for applications in energy conversion and environmental bioremediation. Due to their well-characterized electron transfer mechanisms and ease of genetic manipulation, Shewanella spp. have emerged as a promising chassis for metabolic engineering. In this review, we provide a comprehensive overview of the advancements in Shewanella-based metabolic engineering. We begin by discussing the physiological characteristics of Shewanella, with a particular focus on its extracellular electron transfer (EET) capability. Next, we outline the use of Shewanella as a metabolic engineering chassis, presenting a general framework for strain construction based on the Design-Build-Test-Learn (DBTL) cycle and summarizing key advancements in the engineering of Shewanella's metabolic modules. Finally, we offer a perspective on the future development of Shewanella chassis, highlighting the need for deeper mechanistic insights, rational strain design, and interdisciplinary collaboration to drive further progress.

Revealing the underestimated role of Gram-positive bacteria in iron reduction within paddy soils

Iron reduction in paddy fields is crucial for heavy metal migration and nutrient transformation. Gram-negative iron-reducing bacteria like Geobacter and Shewanella have been widely studied due to their strong extracellular electron transfer capabilities. In contrast, Gram-positive bacteria such as Bacillus and Clostridium are often labeled as weak exoelectrogens, leading to their contributions being overlooked. But could their role in iron reduction have been underestimated? To explore this, we enriched paddy soils with glucose, resulting in a predominance of Gram-positive bacteria (e.g., Clostridiaceae and Bacillaceae) and a small presence of Gram-negative reducers (e.g., Geobacteraceae). Remarkably, despite the abundance of Gram-positive iron reducers being 880 times higher in the glucose system, their iron reduction rate was comparable to that of acetate and lactate systems with more Gram-negative bacteria. This suggests a significant contribution by Gram-positive bacteria to iron reduction. Pure culture experiments further revealed that the iron reduction rates of Bacillus and Clostridium are 15.4 and 4.0 times slower, respectively, than a Gram-negative reducer, Geobacter. However, even in natural paddy soil of this study, Gram-positive iron reducers are 9 times more abundant than Gram-negative ones. This gives us an unexpected insight: Considering both abundance and rate, Gram-positive weak exoelectrogens may actually contribute significantly to iron reduction. This study reveals the underestimated role of Gram-positive bacteria in paddy soils, highlighting the unique characteristics of paddy habitats and the need for further research on these weak exoelectrogens.

The Role of Anode Potential in Electromicrobiology

Electroactive microorganisms are capable of exchanging electrons with electrodes and thus have potential applications in many fields, including bioenergy production, microbial electrochemical synthesis of chemicals, environmental protection, and microbial electrochemical sensors. Due to the limitations of low electron transfer efficiency and poor stability, the application of electroactive microorganisms in industry is still confronted with significant challenges. In recent years, many studies have demonstrated that modulating anode potential is one of the effective strategies to enhance electron transfer efficiency. In this review, we have summarized approximately 100 relevant studies sourced from PubMed and Web of Science over the past two decades. We present the classification of electroactive microorganisms and their electron transfer mechanisms and elucidate the impact of anode potential on the bioelectricity behavior and physiology of electroactive microorganisms. Our review provides a scientific basis for researchers, especially those who are new to this field, to choose suitable anode potential conditions for practical applications to optimize the electron transfer efficiency of electroactive microorganisms, thus contributing to the application of electroactive microorganisms in industry.

Electrode functional microorganisms in bioelectrochemical systems and its regulation: A review

Bioelectrochemical systems (BES) as environmental remediation biotechnologies have boomed in the last two decades. Although BESs combined technologies with electro-chemistry, -biology, and -physics, microorganisms and biofilms remain at their core. In this review, various functional microorganisms in BESs for CO2 reduction, dehalogenation, nitrate, phosphate, and sulfate reduction, metal removal, and volatile organic compound oxidation are summarized and compared in detail. Moreover, interrelationship regulation approaches for functional microorganisms and methods for electroactive biofilm development, such as targeted electrode surface modification, chemical treatment, physical revealing, biological optimization, and genetic programming are pointed out. This review provides promising guidance and suggestions for the selection of microbial inoculants and provides an analysis of the role of individual microorganisms in mixed microbial communities and its metabolisms.

Oral delivery of therapeutic proteins by engineered bacterial type zero secretion system

Genetically engineered commensal bacteria are promising living drugs, however, their therapeutic molecules are frequently confined to their colonization sites. Herein, we report an oral protein delivery technology utilizing an engineered bacterial type zero secretion system (T0SS) via outer membrane vesicles (OMVs). We find that OMVs produced in situ by Escherichia coli Nissle 1917 (EcN) can penetrate the intact gut epithelial barrier to enter the circulation and that epithelial transcytosis involves pinocytosis and dynamin-dependent pathways. EcN is engineered to endogenously load various enzymes into OMVs, and the secreted enzyme-loaded OMVs are able to stably catalyze diverse detoxification reactions against digestive fluid and even enter the circulation. Using hyperuricemic mice and uricase delivery as a demonstration, we demonstrate that the therapeutic efficacy of our engineered EcN with a modified T0SS outperforms that with a direct protein secretion apparatus. The enzyme-loaded OMVs also effectively detoxify human serum samples, highlighting the potential for the clinical treatment of metabolic disorders.

Fabricating an advanced electrogenic chassis by activating microbial metabolism and fine-tuning extracellular electron transfer

Exploiting electrogenic microorganisms as unconventional chassis hosts offers potential solutions to global energy and environmental challenges. However, their limited electrogenic efficiency and metabolic versatility, due to genetic and metabolic constraints, hinder broader applications. Herein, we developed a multifaceted approach to fabricate an enhanced electrogenic chassis, starting with streamlining the genome by removing extrachromosomal genetic material. This reduction led to faster lactate consumption, higher intracellular NADH/NAD+ and ATP/ADP levels, and increased growth and biomass accumulation, as well as promoted electrogenic activity. Transcriptome profiling showed an overall activation of cellular metabolism. We further established a molecular toolkit with a vector vehicle incorporating native replication block and refined promoter components for precise gene expression control. This enabled engineered primary metabolism for greater environmental robustness and fine-tuned extracellular electron transfer (EET) for improved efficiency. The enhanced chassis demonstrated substantially improved pollutant biodegradation and radionuclide removal, establishing a new paradigm for utilizing electrogenic organisms as novel biotechnology chassis.

Harnessing biosynthesized selenium nanoparticles for recruitment of beneficial soil microbes to plant roots

Root exudates can benefit plant growth and health by reshaping the rhizosphere microbiome. Whether nanoparticles biosynthesized by rhizosphere microbes play a similar role in plant microbiome manipulation remains enigmatic. Herein, we collect elemental selenium nanoparticles (SeNPs) from selenobacteria associated with maize roots. In vitro and soil assays show that the SeNPs enhanced plant performance by recruiting plant growth-promoting bacteria (e.g., Bacillus) in a dose-dependent manner. Multiomic profilings unravel a cross-kingdom-signaling cascade that mediates efficient biosynthesis of SeNPs by selenobacteria. Specifically, maize roots perceive histamine signaling from Bacillus spp., which stimulates the plant to produce p-coumarate via root exudation. The rpoS gene in selenobacteria (e.g., Pseudomonas sp. ZY71) responds to p-coumarate signaling and positively regulates the biosynthesis of SeNPs. This study demonstrates a novel mechanism for recruiting host-beneficial soil microbes by microbially synthesized nanoparticles and unlocks promising possibilities for plant microbiome manipulation.

Revolutionizing dairy waste: emerging solutions in conjunction with microbial engineering

The dairy industry is grappling with significant challenges in managing effluent due to environmental concerns and stringent regulatory demands, necessitating innovative solutions. The paper investigates how microbial engineering is transforming the treatment of dairy wastewater, offering advanced methods to minimize environmental impact and enhance sustainability. It delves into the current challenges faced by the dairy industry, such as regulatory compliance and the limitations of traditional treatment technologies, and introduces microbial engineering as a promising solution for effluent management. Microbial engineering leverages genetic engineering techniques and microorganisms to enhance the efficiency of treatment processes like bioaugmentation and bioremediation. The environmental and economic benefits of microbial engineering, highlighting its potential to reduce pollution and lower operational costs for the dairy industry. The specific figures can vary based on factors like farm size and location, studies suggest that microbial engineering can reduce wastewater pollution by up to 50% and nutrient runoff by 30%. It also identifies key challenges and there are still areas including strains for specific pollutants (drugs, hormones), enhance degradation pathways, and increase microbes' stability (stress tolerance, long-term viability) that require further innovation to maximize its benefits. Through case studies and success stories, the paper demonstrates practical applications of microbial engineering in managing dairy effluent, illustrating how it can revolutionize industrial practices for a more sustainable future.

Engineering bionanoreactor in bacteria for efficient hydrogen production

Hydrogen production through water splitting is a vital strategy for renewable and sustainable clean energy. In this study, we developed an approach integrating nanomaterial engineering and synthetic biology to establish a bionanoreactor system for efficient hydrogen production. The periplasmic space (20 to 30 nm) of an electroactive bacterium, Shewanella oneidensis MR-1, was engineered to serve as a bionanoreactor to enhance the interaction between electrons and protons, catalyzed by hydrogenases for hydrogen generation. To optimize electron transfer, we used the microbially reduced graphene oxide (rGO) to coat the electrode, which improved the electron transfer from the electrode to the cells. Native MtrCAB protein complex on S. oneidensis and self-assembled iron sulfide (FeS) nanoparticles acted in tandem to facilitate electron transfer from an electrode to the periplasm. To enhance proton transport, S. oneidensis MR-1 was engineered to express Gloeobacter rhodopsin (GR) and the light-harvesting antenna canthaxanthin. This led to efficient proton pumping when exposed to light, resulting in a 35.6% increase in the rate of hydrogen production. The overexpression of native [FeFe]-hydrogenase further improved the hydrogen production rate by 56.8%. The bionanoreactor engineered in S. oneidensis MR-1 achieved a hydrogen yield of 80.4 μmol/mg protein/day with a Faraday efficiency of 80% at a potential of -0.75 V. This periplasmic bionanoreactor combines the strengths of both nanomaterial and biological components, providing an efficient approach for microbial electrosynthesis.

Machine Learning Model Construction and Testing: Anticipating Cancer Incidence and Mortality

In recent years, the escalating environmental challenges have contributed to a rising incidence of cancer. The precise anticipation of cancer incidence and mortality rates has emerged as a pivotal focus in scientific inquiry, exerting a profound impact on the formulation of public health policies. This investigation adopts a pioneering machine learning framework to address this critical issue, utilizing a dataset encompassing 72,591 comprehensive records that include essential variables such as age, case count, population size, race, gender, site, and year of diagnosis. Diverse machine learning algorithms, including decision trees, random forests, logistic regression, support vector machines, and neural networks, were employed in this study. The ensuing analysis revealed testing accuracies of 62.17%, 61.92%, 54.53%, 55.72%, and 62.30% for the respective models. This state-of-the-art model not only enhances our understanding of cancer dynamics but also equips researchers and policymakers with the capability of making meticulous projections concerning forthcoming cancer incidence and mortality rates. Considering sustainability, the application of this advanced machine learning framework emphasizes the importance of judiciously utilizing extensive and intricate databases. By doing so, it facilitates a more sustainable approach to healthcare planning, allowing for informed decision-making that takes into account the long-term ecological and societal impacts of cancer-related policies. This integrative perspective underscores the broader commitment to sustainable practices in both health research and public policy formulation.

Expression of filaments of the Geobacter extracellular cytochrome OmcS in Shewanella oneidensis

The physiological role of Geobacter sulfurreducens extracellular cytochrome filaments is a matter of debate and the development of proposed electronic device applications of cytochrome filaments awaits methods for large-scale cytochrome nanowire production. Functional studies in G. sulfurreducens are stymied by the broad diversity of redox-active proteins on the outer cell surface and the redundancy and plasticity of extracellular electron transport routes. G. sulfurreducens is a poor chassis for producing cytochrome nanowires for electronics because of its slow, low-yield, anaerobic growth. Here we report that filaments of the G. sulfurreducens cytochrome OmcS can be heterologously expressed in Shewanella oneidensis. Multiple lines of evidence demonstrated that a strain of S. oneidensis, expressing the G. sulfurreducens OmcS gene on a plasmid, localized OmcS on the outer cell surface. Atomic force microscopy revealed filaments with the unique morphology of OmcS filaments emanating from cells. Electron transfer to OmcS appeared to require a functional outer-membrane porin-cytochrome conduit. The results suggest that S. oneidensis, which grows rapidly to high culture densities under aerobic conditions, may be suitable for the development of a chassis for producing cytochrome nanowires for electronics applications and may also be a good model microbe for elucidating cytochrome filament function in anaerobic extracellular electron transfer.

Engineering Electron Transfer Pathway of Cytochrome P450s

Cytochrome P450s (P450s), a superfamily of heme-containing enzymes, existed in animals, plants, and microorganisms. P450s can catalyze various regional and stereoselective oxidation reactions, which are widely used in natural product biosynthesis, drug metabolism, and biotechnology. In a typical catalytic cycle, P450s use redox proteins or domains to mediate electron transfer from NAD(P)H to heme iron. Therefore, the main factors determining the catalytic efficiency of P450s include not only the P450s themselves but also their redox-partners and electron transfer pathways. In this review, the electron transfer pathway engineering strategies of the P450s catalytic system are reviewed from four aspects: cofactor regeneration, selection of redox-partners, P450s and redox-partner engineering, and electrochemically or photochemically driven electron transfer.

Enhancing Extracellular Electron Transfer of a 3D-Printed Shewanella Bioanode with Riboflavin-Modified Carbon Black Bioink

3D printing of a living bioanode holds the potential for the rapid and efficient production of bioelectrochemistry systems. However, the ink (such as sodium alginate, SA) that formed the matrix of the 3D-printed bioanode may hinder extracellular electron transfer (EET) between the microorganism and conductive materials. Here, we proposed a biomimetic design of a 3D-printed Shewanella bioanode, wherein riboflavin (RF) was modified on carbon black (CB) to serve as a redox substance for microbial EET. By introducing the medicated EET pathways, the 3D-printed bioanode obtained a maximum power density of 252 ± 12 mW/m2, which was 1.7 and 60.5 times higher than those of SA-CB (92 ± 10 mW/m2) and a bare carbon cloth anode (3.8 ± 0.4 mW/m2). Adding RF reduced the charge-transfer resistance of a 3D-printed bioanode by 75% (189.5 ± 18.7 vs 47.3 ± 7.8 Ω), indicating a significant acceleration in the EET efficiency within the bioanode. This work provided a fundamental and instrumental concept for constructing a 3D-printed bioanode.

Metabolic engineering strategies to enable microbial electrosynthesis utilization of CO2: recent progress and challenges

Microbial electrosynthesis (MES) is a promising technology that mainly utilizes microbial cells to convert CO2 into value-added chemicals using electrons provided by the cathode. However, the low electron transfer rate is a solid bottleneck hindering the further application of MES. Thus, as an effective strategy, genetic tools play a key role in MES for enhancing the electron transfer rate and diversity of production. We describe a set of genetic strategies based on fundamental characteristics and current successes and discuss their functional mechanisms in driving microbial electrocatalytic reactions to fully comprehend the roles and uses of genetic tools in MES. This paper also analyzes the process of nanomaterial application in extracellular electron transfer (EET). It provides a technique that combines nanomaterials and genetic tools to increase MES efficiency, because nanoparticles have a role in the production of functional genes in EET although genetic tools can subvert MES, it still has issues with difficult transformation and low expression levels. Genetic tools remain one of the most promising future strategies for advancing the MES process despite these challenges.

Modularized Engineering of Shewanella oneidensis MR-1 for Efficient and Directional Synthesis of 5-Aminolevulinic Acid

Shewanella oneidensis MR-1 has found widespread applications in pollutant transformation and bioenergy production, closely tied to its outstanding heme synthesis capabilities. However, this significant biosynthetic potential is still unexploited so far. Here, we turned this bacterium into a highly-efficient bio-factory for green synthesis of 5-Aminolevulinic Acid (5-ALA), an important chemical for broad applications in agriculture, medicine, and the food industries. The native C5 pathway genes of S. oneidensis was employed, together with the introduction of foreign anti-oxidation module, to establish the 5-ALA production module, resulting 87-fold higher 5-ALA yield and drastically enhanced tolerance than the wild type. Furthermore, the metabolic flux was regulated by using CRISPR interference and base editing techniques to suppress the competitive pathways to further improve the 5-ALA titer. The engineered strain exhibited 123-fold higher 5-ALA production capability than the wild type. This study not only provides an appealing new route for 5-ALA biosynthesis, but also presents a multi-dimensional modularized engineering strategy to broaden the application scope of S. oneidensis.

Effect of soil organic matter-mediated electron transfer on heavy metal remediation: Current status and perspectives

Soil contamination by heavy metals poses major risks to human health and the environment. Given the current status of heavy metal pollution, many remediation techniques have been tested at laboratory and contaminated sites. The effects of soil organic matter-mediated electron transfer on heavy metal remediation have not been adequately studied, and the key mechanisms underlying this process have not yet been elucidated. In this review, microbial extracellular electron transfer pathways, organic matter electron transfer for heavy metal reduction, and the factors affecting these processes were discussed to enhance our understanding of heavy metal pollution. It was found that microbial extracellular electrons delivered by electron shuttles have the longest distance among the three electron transfer pathways, and the application of exogenous electron shuttles lays the foundation for efficient and persistent remediation of heavy metals. The organic matter-mediated electron transfer process, wherein organic matter acts as an electron shuttle, promotes the conversion of high valence state metal ions, such as Cr(VI), Hg(II), and U(VI), into less toxic and morphologically stable forms, which inhibits their mobility and bioavailability. Soil type, organic matter structural and content, heavy metal concentrations, and environmental factors (e.g., pH, redox potential, oxygen conditions, and temperature) all influence organic matter-mediated electron transfer processes and bioremediation of heavy metals. Organic matter can more effectively mediate electron transfer for heavy metal remediation under anaerobic conditions, as well as when the heavy metal content is low and the redox potential is suitable under fluvo-aquic/paddy soil conditions. Organic matter with high aromaticity, quinone groups, and phenol groups has a stronger electron transfer ability. This review provides new insights into the control and management of soil contamination and heavy metal remediation technologies.

Direct ammonia oxidation (Dirammox) is favored over cell growth in Alcaligenes ammonioxydans HO-1 to deal with the toxicity of ammonium

Bacteria capable of direct ammonia oxidation (Dirammox) play important roles in global nitrogen cycling and nutrient removal from wastewater. Dirammox process, NH3  → NH2 OH → N2 , first defined in Alcaligenes ammonioxydans HO-1 and encoded by dnf gene cluster, has been found to widely exist in aquatic environments. However, because of multidrug resistance in Alcaligenes species, the key genes involved in the Dirammox pathway and the interaction between Dirammox process and the physiological state of Alcaligenes species remain unclear. In this work, ammonia removal via the redistribution of nitrogen between Dirammox and microbial growth in A. ammonioxydans HO-1, a model organism of Alcaligenes species, was investigated. The dnfA, dnfB, dnfC, and dnfR genes were found to play important roles in the Dirammox process in A. ammonioxydans HO-1, while dnfH, dnfG, and dnfD were not essential genes. Furthermore, an unexpected redistribution phenomenon for nitrogen between Dirammox and cell growth for ammonia removal in HO-1 was revealed. After the disruption of the Dirammox in HO-1, more consumed NH4 + was recovered as biomass-N via rapid metabolic response and upregulated expression of genes associated with ammonia transport and assimilation, tricarboxylic acid cycle, sulfur metabolism, ribosome synthesis, and other molecular functions. These findings deepen our understanding of the molecular mechanisms for Dirammox process in the genus Alcaligenes and provide useful information about the application of Alcaligenes species for ammonia-rich wastewater treatment.

Engineering extracellular electron transfer pathways of electroactive microorganisms by synthetic biology for energy and chemicals production

The excessive consumption of fossil fuels causes massive emission of CO2, leading to climate deterioration and environmental pollution. The development of substitutes and sustainable energy sources to replace fossil fuels has become a worldwide priority. Bio-electrochemical systems (BESs), employing redox reactions of electroactive microorganisms (EAMs) on electrodes to achieve a meritorious combination of biocatalysis and electrocatalysis, provide a green and sustainable alternative approach for bioremediation, CO2 fixation, and energy and chemicals production. EAMs, including exoelectrogens and electrotrophs, perform extracellular electron transfer (EET) (i.e., outward and inward EET), respectively, to exchange energy with the environment, whose rate determines the efficiency and performance of BESs. Therefore, we review the synthetic biology strategies developed in the last decade for engineering EAMs to enhance the EET rate in cell-electrode interfaces for facilitating the production of electricity energy and value-added chemicals, which include (1) progress in genetic manipulation and editing tools to achieve the efficient regulation of gene expression, knockout, and knockdown of EAMs; (2) synthetic biological engineering strategies to enhance the outward EET of exoelectrogens to anodes for electricity power production and anodic electro-fermentation (AEF) for chemicals production, including (i) broadening and strengthening substrate utilization, (ii) increasing the intracellular releasable reducing equivalents, (iii) optimizing c-type cytochrome (c-Cyts) expression and maturation, (iv) enhancing conductive nanowire biosynthesis and modification, (v) promoting electron shuttle biosynthesis, secretion, and immobilization, (vi) engineering global regulators to promote EET rate, (vii) facilitating biofilm formation, and (viii) constructing cell-material hybrids; (3) the mechanisms of inward EET, CO2 fixation pathway, and engineering strategies for improving the inward EET of electrotrophic cells for CO2 reduction and chemical production, including (i) programming metabolic pathways of electrotrophs, (ii) rewiring bioelectrical circuits for enhancing inward EET, and (iii) constructing microbial (photo)electrosynthesis by cell-material hybridization; (4) perspectives on future challenges and opportunities for engineering EET to develop highly efficient BESs for sustainable energy and chemical production. We expect that this review will provide a theoretical basis for the future development of BESs in energy harvesting, CO2 fixation, and chemical synthesis.

Mechanism of Cr(VI) bioreduction by Clostridium sp. LQ25 under Fe(III) reducing conditions

The Cr(VI) bioreduction has attracted widespread attention in the field of Cr(VI) pollution remediation due to its environmental friendliness. Further in-depth research on the reduction mechanisms is necessary to enhance the efficiency of Cr(VI) bioreduction. However, the limited research on Cr(VI) bioreduction mechanisms remains a bottleneck for the practical application of Cr(VI) reduction. In this study, The Cr(VI) reduction of strain LQ25 was significantly improved when Fe(III) was used as an electron acceptor, which increased by 1.6-fold maximum within the set Cr(VI) concentration range. Based on this, the electron transfer process of Cr(VI) reduction was analyzed using strain LQ25. Based on genomic data, flavin proteins were found to interact closely with electron transfer-related proteins using protein-protein interaction (PPi) analysis. Transcriptome analysis revealed that flavin synthesis genes (ribE, ribBA, and ribH) and electron transfer flavoprotein genes (fixA, etfA, fixB, and etfB) were significantly upregulated when Fe(III) was used as the electron acceptor. These results indicate that the fermentative dissimilatory Fe(III)-reducing bacterial strain LQ25 mainly uses flavin as an electron shuttle for electron transfer, which differs from the common use of cytochrome c in respiratory bacteria. These findings on the mechanism of Cr(VI) bioreduction provide technical support for improving the efficiency of Cr(VI) reduction which promote the practical application of Cr(VI) bioreduction in the field of Cr(VI) pollution remediation.

A concise review on wastewater treatment through microbial fuel cell: sustainable and holistic approach

Research for alternative sources for producing renewable energy is rising exponentially, and consequently, microbial fuel cells (MFCs) can be seen as a promising approach for sustainable energy production and wastewater purification. In recent years, MFC is widely utilized for wastewater treatment in which the removal efficiency of heavy metal ranges from 75-95%. They are considered as green and sustainable technology that contributes to environmental safety by reducing the demand for fossil fuels, diminishes carbon emissions, and reverses the trend of global warming. Moreover, significant reduction potential can be seen for other parameters such as total carbon oxygen demand (TCOD), soluble carbon oxygen demand (SCOD), total suspended solids (TSS), and total nitrogen (TN). Furthermore, certain problems like economic aspects, model and design of MFCs, type of electrode material, electrode cost, and concept of electro-microbiology limit the commercialization of MFC technology. As a result, MFC has never been accepted as an appreciable competitor in the area of treating wastewater or renewable energy. Therefore, more efforts are still required to develop a useful model for generating safe, clean, and CO2 emission-free renewable energy along with wastewater treatment. The purpose of this review is to provide a deep understanding of the working mechanism and design of MFC technology responsible for the removal of different pollutants from wastewater and generate power density. Existing studies related to the implementation of MFC technology in the wastewater treatment process along with the factors affecting its functioning and power outcomes have also been highlighted.

Low intensity magnetic separation of vivianite induced by iron reduction on the surface layer of Fe(III)[Fe(0)] iron scrap

Phosphorus (P) recovery through vivianite, which can be found in activated sludge, surplus sludge and digested sludge in the wastewater treatment plants (WWTPs), is a cutting-edge and efficient technology in recent years. However, how to generate and separate vivianite in an effective and economical way with natural iron oxide mineral was still the bottleneck to limit its application. Therefore, in this study, the P recovery efficiency (EP) and vivianite recovery efficiency (EV) of three kinds of iron oxides were investigated. We found that the EP of Akaganeite was 1.83 times and 4.88 times higher than that of Geothite and Hematite. Simultaneously, EV of Akaganeite was 1.64 times and 2.88 times higher than that of Geothite and Hematite. As Akaganeite is main component of rust on the surface of iron scrap, we used Fe(III)[Fe(0)] iron scrap with Fe(0) inside and Akaganeite outside as iron source and electron acceptor for vivianite production and magnetic separation. At the terminal stage (60 day), the P recovery efficiency with 20 g/L Fe(III)[Fe(0)] iron scrap was 36%. Applying a magnetical separator with magnetic field intensity of 0.3 T, vivianite was separated from the solution efficiently and immediately. Low intensity magnetic separation with iron scrap would recover P resources economically with the total cost to be $2.23/kg P, which was much lower than recovery via iron salts. Besides, it provided a significant insights into the P recovery and vivianite separation by reusing Fe waste during wastewater treatment.

Enhanced azo dye reduction at semiconductor-microbe interface: The key role of semiconductor band structure

Low-energy environmental remediation could be achieved by biocatalysis with assistance of light-excited semiconductor, in which the energy band structure of semiconductor has a significant influence on the metabolic process and electron transfer of microbes. In this study, direct Z-scheme and type II heterojunction semiconductor with different energy band structure were successfully synthesized for constructing semiconductor-microbe interface with Shewanella oneidensis MR-1 to achieve acid orange7 (AO7) biodegradation. UV-vis diffuse reflection spectroscopy, photoluminescence spectra and photoelectrochemical analysis revealed that the direct Z-scheme heterojunction semiconductor had stronger reduction power and faster separation of photoelectron-hole, which was beneficial for the AO7 biodegradation at semiconductor-microbe interface. Riboflavin was also involved in electron transfer between the semiconductor and microbes during AO7 reduction. Transcriptome results illustrated that functional gene expression of Shewanella oneidensis MR-1 was upregulated significantly with photo-stimulation of direct Z-scheme semiconductor, and Mtr pathway and conductive pili played the important roles in the photoelectron utilization by Shewanella oneidensis MR-1. This work is expected to provide alternative ideas for designing semiconductor-microbial interface with efficient electron transfer and broadening their applications in bioremediation.

Mechanism and applications of bidirectional extracellular electron transfer of Shewanella

Electrochemically active microorganisms (EAMs) play an important role in the fields of environment and energy. Shewanella is the most common EAM. Research into Shewanella contributes to a deeper comprehension of EAMs and expands practical applications. In this review, the outward and inward extracellular electron transfer (EET) mechanisms of Shewanella are summarized and the roles of riboflavin in outward and inward EET are compared. Then, four methods for the enhancement of EET performance are discussed, focusing on riboflavin, intracellular reducing force, biofilm formation and substrate spectrum, respectively. Finally, the applications of Shewanella in the environment are classified, and the restrictions are discussed. Potential solutions and promising prospects for Shewanella are also provided.

Enforcing energy consumption promotes microbial extracellular respiration for xenobiotic bioconversion

Extracellular electron transfer (EET) empowers electrogens to catalyse the bioconversion of a wide range of xenobiotics in the environment. Synthetic bioengineering has proven effective in promoting EET output. However, conventional strategies mainly focus on modifications of EET-related genes or pathways, which leads to a bottleneck due to the intricate nature of electrogenic metabolic properties and intricate pathway regulation that remain unelucidated. Herein, we propose a novel EET pathway-independent approach, from an energy manipulation perspective, to enhance microbial EET output. The Controlled Hydrolyzation of ATP to Enhance Extracellular Respiration (CHEER) strategy promotes energy utilization and persistently reduces the intracellular ATP level in Shewanella oneidensis, a representative electrogenic microbe. This approach leads to the accelerated consumption of carbon substrate, increased biomass accumulation and an expanded intracellular NADH pool. Both microbial electrolysis cell and microbial fuel cell tests exhibit that the CHEER strain substantially enhances EET capability. Analysis of transcriptome profiles reveals that the CHEER strain considerably bolsters biomass synthesis and metabolic activity. When applied to the bioconversion of model xenobiotics including methyl orange, Cr(VI) and U(VI), the CHEER strain consistently exhibits enhanced removal efficiencies. This work provides a new perspective and a feasible strategy to enhance microbial EET for efficient xenobiotic conversion.

Metabolic regulation of Shewanella oneidensis for microbial electrosynthesis: From extracellular to intracellular

Shewanella oneidensis MR-1 (S. oneidensis MR-1) has been shown to benefit from microbial electrosynthesis (MES) due to its exceptional electron transfer efficiency. In this study, genes involved in both extracellular electron uptake (EEU) and intracellular CO2 conversion processes were examined and regulated to enhance MES performance. The key genes identified for MES in the EEU process were mtrB, mtrC, mtrD, mtrE, omcA and cctA. Overexpression of these genes resulted in 1.5-2.1 times higher formate productivity than that of the wild-type strains (0.63 mmol/(L·μg protein)), as 0.94-1.61 mmol/(L·μg protein). In the intracellular CO2 conversion process, overexpression of the nadE, nadD, nadR, nadV, pncC and petC genes increased formate productivity 1.3-fold-3.4-fold. Moreover, overexpression of the formate dehydrogenase genes fdhA1, fdhB1 and fdhX1 in modified strains led to a 2.3-fold-3.1-fold increase in formate productivity compared to wild-type strains. The co-overexpression of cctA, fdhA1 and nadV in the mutant strain resulted in 5.59 times (3.50 mmol/(L·μg protein)) higher formate productivity than that of the wild-type strains. These findings revealed that electrons of MES derived from the electrode were utilized in the energy module for synthesizing ATP and NADH, followed by the synthesis of formate in formate dehydrogenase by the combinatorial effects of ATP, NADH, electrons and CO2. The results provide new insights into the mechanism of MES in S. oneidensis MR-1 and pave the way for genetic improvements that could facilitate the further application of MES.

Metabolic engineering of commensal bacteria for gut butyrate delivery and dissection of host-microbe interaction

An overwhelming number of studies have reported the correlation of decreased abundance of butyrate-producing commensals with a wide range of diseases. However, the molecular-level mechanisms whereby gut butyrate causally affects the host mucosal immunity and pathogenesis were poorly understood, hindered by the lack of efficient tools to control intestinal butyrate. Here we engineered a facultative anaerobic commensal bacterium to delivery butyrate at the intestinal mucosal surface, and implemented it to dissect the causal role of gut butyrate in regulating host intestinal homeostasis in a model of murine chronic colitis. Mechanistically, we show that gut butyrate protected against colitis and preserved intestinal mucosal homeostasis through its inhibiting effect on the key pyroptosis executioner gasdermin D (GSDMD) of colonic epithelium, via functioning as an HDAC3 inhibitor. Overall, our work presents a new avenue to build synthetic living delivery bacteria to decode causal molecules at the host-microbe interface with molecular-level insights.

A bibliography study of Shewanella oneidensis biofilm

This study employs a bibliography study method to evaluate 472 papers focused on Shewanella oneidensis biofilms. Biofilms, which are formed when microorganisms adhere to surfaces or interfaces, play a crucial role in various natural, engineered, and medical settings. Within biofilms, microorganisms are enclosed in extracellular polymeric substances (EPS), creating a stable working environment. This characteristic enhances the practicality of biofilm-based systems in natural bioreactors, as they are less susceptible to temperature and pH fluctuations compared to enzyme-based bioprocesses. Shewanella oneidensis, a nonpathogenic bacterium with the ability to transfer electrons, serves as an example of a species isolated from its environment that exhibits extensive biofilm applications. These applications, such as heavy metal removal, offer potential benefits for environmental engineering and human health. This paper presents a comprehensive examination and review of the biology and engineering aspects of Shewanella biofilms, providing valuable insights into their functionality.

Synergetic effects of catalyst-surface dual-electric centers and microbes for efficient removal of ciprofloxacin in water

Antibiotics and antibiotic resistance genes (ARGs) are still a problem in biological treatment. Herein, we propose a synergetic strategy between microbes and dual-electric centers catalysts (CCN/Cu-Al2O3/ceramsite) for Ciprofloxacin (CIP)-contained (5 mg/L) water treatment in an up-flow biological filter. CIP was cleaved into small molecules by the catalyst, bringing a 57.6% removal and reducing 10.5% ARG. The characterization results verified that a Cu-π electrostatic force occurs on the catalyst surface, forming electron-rich areas around Cu and electron-poor areas at the carbon-doped g-C3N4 (CCN) aromatic ring. Thus, the electrons of adsorbed CIP were delocalized and then captured by the adsorbed extracellular polymeric substance at the electron-rich areas. Therefore, the synergetic process weakened the stress of CIP on bacteria and reduced ARG accumulation. It also enriched more electro-active bacteria on the surface of CCN/Cu-Al2O3/ceramsite, promoting the expression of extracellular electron transfer-related genes and reconstructing the energy metabolism mode. This result provides an opportunity for refractory antibiotic treatment in the biological process.

Advancing understanding of microbial biofilms through machine learning-powered studies

Microbial biofilms are prevalent in various environments and pose significant challenges to food safety and public health. The biofilms formed by pathogens can cause food spoilage, foodborne illness, and infectious diseases, which are difficult to treat due to their enhanced antimicrobial resistance. While the composition and development of biofilms have been widely studied, their profound impact on food, the food industry, and public health has not been sufficiently recapitulated. This review aims to provide a comprehensive overview of microbial biofilms in the food industry and their implication on public health. It highlights the existence of biofilms along the food-producing chains and the underlying mechanisms of biofilm-associated diseases. Furthermore, this review thoroughly summarizes the enhanced understanding of microbial biofilms achieved through machine learning approaches in biofilm research. By consolidating existing knowledge, this review intends to facilitate developing effective strategies to combat biofilm-associated infections in both the food industry and public health.

Living electrochemical biosensing: Engineered electroactive bacteria for biosensor development and the emerging trends

Bioelectrical interfaces made of living electroactive bacteria (EAB) provide a unique opportunity to bridge biotic and abiotic systems, enabling the reprogramming of electrochemical biosensing. To develop these biosensors, principles from synthetic biology and electrode materials are being combined to engineer EAB as dynamic and responsive transducers with emerging, programmable functionalities. This review discusses the bioengineering of EAB to design active sensing parts and electrically connective interfaces on electrodes, which can be applied to construct smart electrochemical biosensors. In detail, by revisiting the electron transfer mechanism of electroactive microorganisms, engineering strategies of EAB cells for biotargets recognition, sensing circuit construction, and electrical signal routing, engineered EAB have demonstrated impressive capabilities in designing active sensing elements and developing electrically conductive interfaces on electrodes. Thus, integration of engineered EAB into electrochemical biosensors presents a promising avenue for advancing bioelectronics research. These hybridized systems equipped with engineered EAB can promote the field of electrochemical biosensing, with applications in environmental monitoring, health monitoring, green manufacturing, and other analytical fields. Finally, this review considers the prospects and challenges of the development of EAB-based electrochemical biosensors, identifying potential future applications.

Enhanced bidirectional extracellular electron transfer based on biointerface interaction of conjugated polymers-bacteria biohybrid system

The low bacteria loading capacity and low extracellular electron transfer (EET) efficiency are two major bottlenecks restricting the performance of the bioelectrochemical systems from practical applications. Herein, we demonstrated that conjugated polymers (CPs) could enhance the bidirectional EET efficiency through the intimate biointerface interactions of CPs-bacteria biohybrid system. Upon the formation of CPs/bacteria biohybrid, thick and intact CPs-biofilm formed which ensured close biointerface interactions between bacteria-to-bacteria and bacteria-to-electrode. CPs could promote the transmembrane electron transfer through intercalating into the cell membrane of bacteria. Utilizing the CPs-biofilm biohybrid electrode as anode in microbial fuel cell (MFC), the power generation and lifetime of MFC had greatly improved based on accelerated outward EET. Moreover, using the CPs-biofilm biohybrid electrode as cathode in electrochemical cell, the current density was increased due to the enhanced inward EET. Therefore, the intimate biointerface interaction between CPs and bacteria greatly enhanced the bidirectional EET, indicating that CPs exhibit promising applications in both MFC and microbial electrosynthesis.

Developing a PAM-Flexible CRISPR-Mediated Dual-Deaminase Base Editor to Regulate Extracellular Electron Transport in Shewanella oneidensis

Shewanella oneidensis MR-1 is a promising electroactive microorganism in environmental bioremediation, bioenergy generation, and bioproduct synthesis. Accelerating the extracellular electron transfer (EET) pathway that enables efficient electron exchange between microbes and extracellular substances is critical for improving its electrochemical properties. However, the potential genomic engineering strategies for enhancing EET capabilities are still limited. Here, we developed a clustered regularly interspaced short palindromic repeats (CRISPR)-mediated dual-deaminase base editing system, named in situ protospacer-adjacent motif (PAM)-flexible dual base editing regulatory system (iSpider), for precise and high-throughput genomic manipulation. The iSpider enabled simultaneous C-to-T and A-to-G conversions with high diversity and efficiency in S. oneidensis. By weakening DNA glycosylase-based repair pathway and tethering two copies of adenosine deaminase, the A-to-G editing efficiency was obviously improved. As a proof-of-concept study, the iSpider was adapted to achieve multiplexed base editing for the regulation of the riboflavin biosynthesis pathway, and the optimized strain showed an approximately three-fold increase in riboflavin production. Moreover, the iSpider was also applied to evolve the performance of an inner membrane component CymA implicated in EET, and one beneficial mutant facilitating electron transfer could be rapidly identified. Taken together, our study demonstrates that the iSpider allows efficient base editing in a PAM-flexible manner, providing insights into the design of novel genomic tools for Shewanella engineering.

Microbe-Anode Interactions: Comparing the impact of genetic and material engineering approaches to improve the performance of microbial electrochemical systems (MES)

Microbial electrochemical systems (MESs) are a highly versatile platform technology with a particular focus on power or energy production. Often, they are used in combination with substrate conversion (e.g., wastewater treatment) and production of value-added compounds via electrode-assisted fermentation. This rapidly evolving field has seen great improvements both technically and biologically, but this interdisciplinarity sometimes hampers overseeing strategies to increase process efficiency. In this review, we first briefly summarize the terminology of the technology and outline the biological background that is essential for understanding and thus improving MES technology. Thereafter, recent research on improvements at the biofilm-electrode interface will be summarized and discussed, distinguishing between biotic and abiotic approaches. The two approaches are then compared, and resulting future directions are discussed. This mini-review therefore provides basic knowledge of MES technology and the underlying microbiology in general and reviews recent improvements at the bacteria-electrode interface.

Self-purification of actual wastewater via microbial-synergy driving of catalyst-surface microelectronic field: A pilot-scale study

High energy consumption is impedimental for eliminating refractory organics in wastewater by current technologies. Herein, we develop an efficient self-purification process for actual non-biodegradable dyeing wastewater at pilot scale, using N-doped graphene-like (CN) complexed Cu-Al₂O₃ supported Al₂O₃ ceramics (HCLL-S8-M) fixed-bed reactor without additional input. About 36% chemical oxygen demand removal was achieved within 20 min empty bed retention time and maintained stability for almost one year. The HCLL-S8-M structure feature and its interface on microbial community structure, functions, and metabolic pathways were analyzed by density-functional theory calculation, X-ray photoelectron spectroscopy, multiomics analysis of metagenome, macrotranscriptome and macroproteome. On the surface of HCLL-S8-M, a strong microelectronic field (MEF) was formed by the electron-rich/poor area due to Cu-π interaction from the complexation between phenolic hydroxy of CN and Cu species, driving the electrons of the adsorbed dye pollutants to the microorganisms through extracellular polymeric substance and the direct transfer of extracellular electrons, causing their degradation into CO₂ and intermediates, which was degraded partly via intracellular metabolism. The lower energy feeding for the microbiome produced less adenosine triphosphate, resulting in little sludge throughout reaction. The MEF from electronic polarization is greatly potential to develop low-energy wastewater treatment technology.

Recent advances in enrichment, isolation, and bio-electrochemical activity evaluation of exoelectrogenic microorganisms

Exoelectrogenic microorganisms (EEMs) catalyzed the conversion of chemical energy to electrical energy via extracellular electron transfer (EET) mechanisms, which underlay diverse bio-electrochemical systems (BES) applications in clean energy development, environment and health monitoring, wearable/implantable devices powering, and sustainable chemicals production, thereby attracting increasing attentions from academic and industrial communities in the recent decades. However, knowledge of EEMs is still in its infancy as only ~100 EEMs of bacteria, archaea, and eukaryotes have been identified, motivating the screening and capture of new EEMs. This review presents a systematic summarization on EEM screening technologies in terms of enrichment, isolation, and bio-electrochemical activity evaluation. We first generalize the distribution characteristics of known EEMs, which provide a basis for EEM screening. Then, we summarize EET mechanisms and the principles underlying various technological approaches to the enrichment, isolation, and bio-electrochemical activity of EEMs, in which a comprehensive analysis of the applicability, accuracy, and efficiency of each technology is reviewed. Finally, we provide a future perspective on EEM screening and bio-electrochemical activity evaluation by focusing on (i) novel EET mechanisms for developing the next-generation EEM screening technologies, and (ii) integration of meta-omics approaches and bioinformatics analyses to explore nonculturable EEMs. This review promotes the development of advanced technologies to capture new EEMs.

Advances in mechanisms and engineering of electroactive biofilms

Electroactive biofilms (EABs) are electroactive microorganisms (EAMs) encased in conductive polymers that are secreted by EAMs and formed by the accumulation and cross-linking of extracellular polysaccharides, proteins, nucleic acids, lipids, and other components. EABs are present in the form of multicellular aggregates and play a crucial role in bioelectrochemical systems (BESs) for diverse applications, including biosensors, microbial fuel cells for renewable bioelectricity production and remediation of wastewaters, and microbial electrosynthesis of valuable chemicals. However, naturally occurred EABs are severely limited owing to their low electrical conductivity that seriously restrict the electron transfer efficiency and practical applications. In the recent decade, synthetic biology strategies have been adopted to elucidate the regulatory mechanisms of EABs, and to enhance the formation and electrical conductivity of EABs. Based on the formation of EABs and extracellular electron transfer (EET) mechanisms, the synthetic biology-based engineering strategies of EABs are summarized and reviewed as follows: (i) Engineering the structural components of EABs, including strengthening the synthesis and secretion of structural elements such as polysaccharides, eDNA, and structural proteins, to improve the formation of biofilms; (ii) Enhancing the electron transfer efficiency of EAMs, including optimizing the distribution of c-type cytochromes and conducting nanowire assembly to promote contact-based EET, and enhancing electron shuttles' biosynthesis and secretion to promote shuttle-mediated EET; (iii) Incorporating intracellular signaling molecules in EAMs, including quorum sensing systems, secondary messenger systems, and global regulatory systems, to increase the electron transfer flux in EABs. This review lays a foundation for the design and construction of EABs for diverse BES applications.

Putting the electro-bugs to work: A systematic review of 22 years of advances in bio-electrochemical systems and the parameters governing their performance

Wastewater treatment using bioelectrochemical systems (BESs) can be considered as a technology finding application in versatile areas such as for renewable energy production and simultaneous reducing environmental problems, biosensors, and bioelectrosynthesis. This review paper reports and critically discusses the challenges, and advances in bio-electrochemical studies in the 21st century. To sum and critically analyze the strides of the last 20+ years on the topic, this study first provides a comprehensive analysis on the structure, performance, and application of BESs, which include Microbial Fuel Cells (MFCs), Microbial Electrolysis Cells (MECs) and Microbial Desalination Cells (MDCs). We focus on the effect of various parameters, such as electroactive microbial community structure, electrode material, configuration of bioreactors, anode unit volume, membrane type, initial COD, co-substrates and the nature of the input wastewater in treatment process and the amount of energy and fuel production, with the purpose of showcasing the modes of operation as a guide for future studies. The results of this review show that the BES have great potential in reducing environmental pollution, purifying saltwater, and producing energy and fuel. At a larger scale, it aspires to facilitate the path of achieving sustainable development and practical application of BES in real-world scenarios.

Lumichrome from the photolytic riboflavin acts as an electron shuttle in microbial photoelectrochemical systems

Riboflavin has been proposed to serve as an electron shuttle in photoelectrochemical systems. However, riboflavin was also observed for abiotic photolysis under illumination. Such conflicting reports raise the necessity for further investigation. In this study, riboflavin secreted by Rhodopseudomonas palustris was studied to clarify its stability and electron shuttle function under illumination. The data of high-performance liquid chromatography-mass spectrometry showed that the riboflavin was photolyzed to lumichrome in microbial photoelectrochemical systems. In addition, the anodic current increased by 75% after adding lumichrome compared with that of the control; it further demonstrated that lumichrome, not riboflavin, as an electron shuttle could facilitate microbial electron transfer. This study clarifies the mechanism of the interface process in microbial photoelectrochemical systems.

Goethite and riboflavin synergistically enhance Cr(VI) reduction by Shewanella oneidensis MR-1

Bioreduction of Cr(VI) is cost-effective and environmentally friendly, however, the slow bioreduction rate limits its application. In this study, the potential synergistic enhancement of Cr(VI) bioreduction by shewanella oneidensis MR-1 (S. oneidensis) with goethite and riboflavin (RF) was investigated. The results showed that the S. oneidensis reaction system reduce 29.2% of 20 mg/L Cr(VI) after 42 h reaction, while the S. oneidensis/goethite/RF reaction system increased the Cr(VI) reduction rate to 87.74%. RF as an efficient electron shuttle and Fe(II) from goethite bioreduction were identified as the crucial components in Cr(VI) reduction. XPS analysis showed that the final precipitates of Cr(VI) reduction were Cr(CH₃C(O)CHC(O)CH₃)₃ and Cr₂O₃ and adhered to the bacterial cell surface. In this process, the microbial surface functional groups such as hydroxyl and carboxyl groups participated in the adsorption and reduction of Cr(VI). Meanwhile, an increase in cytochrome c led to an increase in electron transfer system activity (ETSA), causing a significant enhancement in extracellular electron transfer efficiency. This study provides insight into the mechanism of Cr(VI) reduction in a complex environment where microorganisms, iron minerals and RF coexist, and the synergistic treatment method of Fe(III) minerals and RF has great potential application for Cr(VI) detoxification in aqueous environment.

The material-microorganism interface in microbial hybrid electrocatalysis systems

This review presents a comprehensive summary of the material-microorganism interface in microbial hybrid electrocatalysis systems. Microbial hybrid electrocatalysis has been developed to combine the advantages of inorganic electrocatalysis and microbial catalysis. However, electron transfer at the interfaces between microorganisms and materials is a very critical issue that affects the efficiency of the system. Therefore, this review focuses on the electron transfer at the material-microorganism interface and the strategies for building efficient microorganism and material interfaces. We begin with a brief introduction of the electron transfer mechanism in both the bioanode and biocathode of bioelectrochemical systems to understand the material-microorganism interface. Next, we summarise the strategies for constructing efficient material-microorganism interfaces including material design and modification and bacterial engineering. We also discuss emerging studies on the bio-inorganic hybrid electrocatalysis system. Understanding the interface between electrode/active materials and the microorganisms, especially the electron transfer processes, could help to drive the evolution of material-microorganism hybrid electrocatalysis systems towards maturity.

Moving towards the enhancement of extracellular electron transfer in electrogens

Electrogens are very common in nature and becoming a contemporary theme for research as they can be exploited for extracellular electron transfer. Extracellular electron transfer is the key mechanism behind bioelectricity generation and bioremediation of pollutants via microbes. Extracellular electron transfer mechanisms for electrogens other than Shewanella and Geobacter are less explored. An efficient extracellular electron transfer system is crucial for the sustainable future of bioelectrochemical systems. At present, the poor extracellular electron transfer efficiency remains a decisive factor in limiting the development of efficient bioelectrochemical systems. In this review article, the EET mechanisms in different electrogens (bacteria and yeast) have been focused. Apart from the well-known electron transfer mechanisms of Shewanella oneidensis and Geobacter metallireducens, a brief introduction of the EET pathway in Rhodopseudomonas palustris TIE-1, Sideroxydans lithotrophicus ES-1, Thermincola potens JR, Lysinibacillus varians GY32, Carboxydothermus ferrireducens, Enterococcus faecalis and Saccharomyces cerevisiae have been included. In addition to this, the article discusses the several approaches to anode modification and genetic engineering that may be used in order to increase the rate of extracellular electron transfer. In the side lines, this review includes the engagement of the electrogens for different applications followed by the future perspective of efficient extracellular electron transfer.

Systematic Full-Cycle Engineering Microbial Biofilms to Boost Electricity Production in Shewanella oneidensis

Electroactive biofilm plays a crucial rule in the electron transfer efficiency of microbial electrochemical systems (MES). However, the low ability to form biofilm and the low conductivity of the formed biofilm substantially limit the extracellular electron transfer rate of microbial cells to the electrode surfaces in MES. To promote biofilm formation and enhance biofilm conductivity, we develop synthetic biology approach to systematically engineer Shewanella oneidensis, a model exoelectrogen, via modular manipulation of the full-cycle different stages of biofilm formation, namely, from initial contact, cell adhesion, and biofilm growth stable maturity to cell dispersion. Consequently, the maximum output power density of the engineered biofilm reaches 3.62 ± 0.06 W m-2, 39.3-fold higher than that of the wild-type strain of S. oneidensis, which, to the best our knowledge, is the highest output power density that has ever been reported for the biofilms of the genetically engineered Shewanella strains.

Elongated Riboflavin-Producing Shewanella oneidensis in a Hybrid Biofilm Boosts Extracellular Electron Transfer

Shewanella oneidensis is able to carry out extracellular electron transfer (EET), although its EET efficiency is largely limited by low flavin concentrations, poor biofilm forming-ability, and weak biofilm conductivity. After identifying an important role for riboflavin (RF) in EET via in vitro experiments, the synthesis of RF is directed to 837.74 ± 11.42 µm in S. oneidensis. Molecular dynamics simulation reveals RF as a cofactor that binds strongly to the outer membrane cytochrome MtrC, which is correspondingly further overexpressed to enhance EET. Then the cell division inhibitor sulA, which dramatically enhanced the thickness and biomass of biofilm increased by 155% and 77%, respectively, is overexpressed. To reduce reaction overpotential due to biofilm thickness, a spider-web-like hybrid biofilm comprising RF, multiwalled carbon nanotubes (MWCNTs), and graphene oxide (GO) with adsorption-optimized elongated S. oneidensis, achieve a 77.83-fold increase in power (3736 mW m^-2 ) relative to MR-1 and dramatically reduce the charge-transfer resistance and boosted biofilm electroactivity. This work provides an elegant paradigm to boost EET based on a synthetic biology strategy and materials science strategy, opens up further opportunities for other electrogenic bacteria.

The electron transport mechanism of downflow Leersia hexandra Swartz constructed wetland-microbial fuel cell when used to treat Cr(VI) and p-chlorophenol

Constructed wetland-microbial fuel cells are used to treat heavy metal and/or refractory organic wastewater. However, the electron transport mechanism of downflow Leersia hexandra constructed wetland-microbial fuel cells (DLCW-MFCs) is poorly understood when used to treat composite-polluted wastewater containing Cr(VI) and p-chlorophenol (4-CP) (C&P). In this study, metagenomics and in situ electrochemical techniques were used to investigate the electrochemical properties and the electricigens and their dominant gene functions. The DLCW-MFC was used to treat C&P and single-pollutant wastewater containing Cr(VI) (SC) and 4-CP (SP). The results showed that C&P had a higher current response and charge transfer capability and lower solution resistance plus charge transfer resistance. The anode bacteria solution of C&P contained more electron carriers (RF, FMN, FAD, CoQ10, and Cyt c). Metagenomic sequencing indicated that the total relative abundance of the microorganisms associated with electricity production (Desulfovibrio, Pseudomonas, Azospirillum, Nocardia, Microbacterium, Delftia, Geobacter, Acinetobacter, Bacillus, and Clostridium) was the highest in C&P (4.24%). However, Microbacterium was abundant in SP (0.12%), which exerted antagonistic effects on other electricigens. Among the 10 electricigens based on gene annotation, C&P had a higher overall relative abundance of the Unigene gene annotated to the KO pathway and CAZy level B compared with SC and SP, which were 1.31% and 0.582% respectively. Unigene153954 (ccmC), Unigene357497 (coxB), and Unigene1033667 (ubiG) were related to the electron carrier Cyt c, electron transfer, and CoQ biosynthesis, respectively. These were annotated to Desulfovibrio, Delftia, and Pseudomonas, respectively. Unigene161312 (AA1) used phenols and other substrates as electron donors and was annotated to Pseudomonas. Other functional carbohydrate enzyme genes (e.g., GT2, GT4, and GH31) used carbohydrates as donors and were annotated to other electricigens. This study provides a theoretical basis for electron transfer to promote the development of CW-MFCs.

Modular Engineering Strategy to Redirect Electron Flux into the Electron-Transfer Chain for Enhancing Extracellular Electron Transfer in Shewanella oneidensis

Efficient extracellular electron transfer (EET) of exoelectrogens is critical for practical applications of various bioelectrochemical systems. However, the low efficiency of electron transfer remains a major bottleneck. In this study, a modular engineering strategy, including broadening the sources of the intracellular electron pool, enhancing intracellular nicotinamide adenine dinucleotide (NADH) regeneration, and promoting electron release from electron pools, was developed to redirect electron flux into the electron transfer chain in Shewanella oneidensis MR-1. Among them, four genes include gene SO1522 encoding a lactate transporter for broadening the sources of the intracellular electron pool, gene gapA encoding a glyceraldehyde-3-phosphate dehydrogenase and gene mdh encoding a malate dehydrogenase in the central carbon metabolism for enhancing intracellular NADH regeneration, and gene ndh encoding NADH dehydrogenase on the inner membrane for releasing electrons from intracellular electron pools into the electron-transport chain. Upon assembly of the four genes, electron flux was directly redirected from the electron donor to the electron-transfer chain, achieving 62% increase in intracellular NADH levels, which resulted in a 3.5-fold enhancement in the power density from 59.5 ± 3.2 mW/m² (wild type) to 270.0 ± 12.7 mW/m² (recombinant strain). This study confirmed that redirecting electron flux from the electron donor to the electron-transfer chain is a viable approach to enhance the EET rate of S. oneidensis.

A common inducer molecule enhances sugar utilization by Shewanella oneidensis MR-1

Shewanella oneidensis MR-1 is an electroactive bacterium that is a promising host for bioelectrochemical technologies, which makes it a common target for genetic engineering, including gene deletions and expression of heterologous pathways. Expression of heterologous genes and gene knockdown via CRISPRi in S. oneidensis are both frequently induced by β-D-1-thiogalactopyranoside (IPTG), a commonly used inducer molecule across many model organisms. Here, we report and characterize an unexpected phenotype; IPTG enhances the growth of wild-type S. oneidensis MR-1 on the sugar substrate N-acetylglucosamine (NAG). IPTG improves the carrying capacity of S. oneidensis growing on NAG while the growth rate remains similar to cultures without the inducer. Extracellular acetate accumulates faster and to a higher concentration in cultures without IPTG than those with it. IPTG appears to improve acetate metabolism, which combats the negative effect that acetate accumulation has on the growth of S. oneidensis with NAG. We recommend using extensive experimental controls and careful data interpretation when using both NAG and IPTG in S. oneidensis cultures.