Band-like transport, high electron mobility and high photoconductivity in all-inorganic nanocrystal arrays

Coupled 2D quantum dot films for next generation solar cells: electronic structure and anomalous light absorption behaviour

There is an increasing interest into the fabrication of high-dimensionality colloidal quantum dot (CQD) arrays, with long-range periodicity and reduced inter-dot distances. The synthesis of such super-solids, where the dots play the role of conventional atoms in a crystal, is, however, still challenging. This work focuses on understanding the physics of those systems and finding applications for them in solar cells of two different architectures: the hot carrier solar cell and the intermediate band solar cell. We combine the accuracy of the atomistic semiempirical pseudopotential method, at the single-dot level, with the versatility of the tight-binding formalism, for the array calculations, to investigate the electronic structure and optical absorption of individual and stacked 2D InX (X = P, As, Sb) CQD arrays (films), and their dependence on the dot material, the number of layers and the interlayer distance. Our results support the hypothesis of a universal behaviour of absorption in 2D materials, already found in graphene and InAs nanomembranes, where the optical absorption in the region 0.5-1.2 eV is nearly independent of the photon energy and equal to a universal quantum of absorption AQ = πafs = 0.02293 (where afs is the fine structure constant). However, our findings contradict the assumption that the absorbance of n layers is simply nAQ. Indeed, according to our results this conclusion only holds for uncoupled stacked layers, whereas the presence of inter-layer coupling degrades the absorption properties, leading to A(n) < nA(1), questioning the wisdom of the efforts of achieving 3D super-solids if the aim is to improve optical absorption. Additionally, we propose a simplified model that accurately describes the intermediate band structure, useful for device simulations.

Warm metalworking for plastic manufacturing in brittle semiconductors

Semiconductors are the core of modern electronics1. Because of their brittleness, semiconductors are usually processed by the complicated techniques of sputtering or deposition2-4, instead of the effective and versatile metalworking methods like rolling, extrusion and pressing used with metals5. Here we show that brittle semiconductors can be plastically manufactured with an extensibility as large as ~3,000% using warm metalworking, that is, plastic manufacturing at slightly elevated temperatures (empirically below 500 K). Many bulk brittle semiconductors, such as Cu2Se, Ag2Se and Bi90Sb10, can be processed like metals below 400-500 K into free-standing, large and high-quality films with a thickness from the macro-scale to the micrometre scale. A model based on temperature-dependent collective atomic displacement and thermal vibration is proposed to explain the superior plasticity. The warm-metalworked films can retain the excellent and tunable physical properties of the bulk versions, such as a high carrier mobility up to ~5,000 cm2 V-1 s-1 and tunable electrical conductivities over six orders of magnitude by adjusting the chemical composition. A case study in film thermoelectric devices demonstrates ultra-high normalized output power densities of 43-54 μW cm-2 K-2. This work suggests that brittle semiconductors can be manufactured by warm metalworking for applications in various electronics.

Perovskite Nanocrystal Self-Assemblies in 3D Hollow Templates

Highly ordered nanocrystal (NC) assemblies, namely, superlattices (SLs), have been investigated as materials for optical and optoelectronic devices due to their unique properties based on interactions among neighboring NCs. In particular, lead halide perovskite NC SLs have attracted significant attention owing to their extraordinary optical characteristics of individual NCs and collective emission processes like superfluorescence (SF). So far, the primary method for preparing perovskite NC SLs has been the drying-mediated self-assembly method, in which the colloidal NCs spontaneously assemble into SLs during solvent evaporation. However, this method lacks controllability because NCs form random-sized SLs at random positions on the substrate, rendering NC assemblies in conjunction with device structures, such as photonic waveguides or microcavities, challenging. Here, we demonstrate template-assisted self-assembly to deterministically place perovskite NC SLs and control their geometrical properties. A solution of CsPbBr3 NCs is drop-casted on a substrate with lithographically defined hollow structures. After solvent evaporation and removal of excess NCs from the substrate surface, NCs remain only in the templates, thereby defining the position and size of these NC assemblies. We performed photoluminescence (PL) measurements on these NC assemblies and observed signatures of SF, similar to those in spontaneously assembled SLs. Our findings are crucial for optical devices that harness embedded perovskite NC assemblies and enable fundamental studies on how these collective effects can be tailored through the SL geometry.

Coordination bonds as a tool for tuning photoconductance in nanostructured hybrid materials made of molecular antennas and metal nanoparticles

The synthesis of robust, versatile materials in which electrical conduction is enhanced by light irradiation is of prime importance for fields as varied as photodetectors, photodiodes, solar cells and light sensors. Hybrid materials offer the advantage of combining the robustness of an inorganic building block with the adaptability of a molecular subunit. Herein, we demonstrate the importance of properly investigating the nature of the chemical interactions between the constituent elements in order to optimize photoconductance within hybrid materials. To this end, platinum nanoparticle self-assemblies are synthesized in solution, including a series of zinc-porphyrins differentially functionalized with pyridine moieties in the meso position. The presence of coordinating groups on the molecular entities drastically reinforced both the structural cohesion of the system and its photoconductive properties.

Role of Superlattice Phonons in Charge Localization Across Quantum Dot Arrays

Understanding charge transport in semiconductor quantum dot (QD) assemblies is important for developing the next generation of solar cells and light-harvesting devices based on QD technology. One of the key factors that governs the transport in such systems is related to the hybridization between the QDs. Recent experiments have successfully synthesized QD molecules, arrays, and assemblies by directly fusing the QDs, with enhanced hybridization leading to high carrier mobilities and coherent band-like electronic transport. In this work, we theoretically investigate the electron transfer dynamics across a finite CdSe-CdS core-shell QD array, considering up to seven interconnected QDs in one dimension. We find that, even in the absence of structural and size disorder, electron transfer can become localized by the emergent low-frequency superlattice vibrational modes when the connecting neck between QDs is narrow. On the other hand, we also identify a regime where the same vibrational modes facilitate coherent electron transport when the connecting necks are wide. Overall, we elucidate the crucial effects of electronic and superlattice symmetries and their couplings when designing high-mobility devices based on QD superlattices.

Solvent Engineering in Ligand Exchange of the Hole Transport Layer Enables High-Performance PbS Quantum Dot Solar Cells

The performance of lead sulfide colloidal quantum dot (PbS-CQD) solar cells has long been hindered by interface defects in the transport layer. Traditionally, 1,2-ethanedithiol (EDT), used in solid-state ligand exchange, has been a common choice as the hole transport layer (HTL) in many PbS-CQD solar cells. However, the rapid reaction rate and chain length mismatch (shorter-chain EDT versus longer-chain oleic acid) during the ligand exchange process often introduce crack defects in the HTL film, resulting in an unexpected low performance. In this work, ethyl acetate (EA) was introduced into acetonitrile (ACN) solution to slow down the ligand exchange rate. With EA's assistance, a high-quality HTL film with fewer cracks was achieved, leading to a reduced trap density from 2.26 × 1016 cm-3 to 1.85 × 1016 cm-3. Consequently, this led to an improved VOC by 27.5 mV and an increased power conversion efficiency (PCE) from 11.01% to 12.16%.

Colloidal Dispersions of Sterically and Electrostatically Stabilized PbS Quantum Dots: Structure Factors, Second Virial Coefficients, and Film-Forming Properties

Electrostatically stabilized nanocrystals (NCs) and, in particular, quantum dots (QDs) hold promise for forming strongly coupled superlattices due to their compact and electronically conductive surface ligands. However, studies of the colloidal dispersion and interparticle interactions of electrostatically stabilized sub-10 nm NCs have been limited, hindering the optimization of their colloidal stability and self-assembly. In this study, we employed small-angle X-ray scattering (SAXS) experiments to investigate the interparticle interactions and arrangement of PbS QDs with thiostannate ligands (PbS-Sn2S64-) in polar solvents. The study reveals significant deviations from the ideal solution behavior in electrostatically stabilized QD dispersions. Our results demonstrate that PbS-Sn2S64- QDs exhibit long-range interactions within the solvent, in contrast to the short-range steric repulsion characteristic of PbS QDs with oleate ligands (PbS-OA). Introducing highly charged multivalent electrolytes screens electrostatic interactions between charged QDs, reducing the length scale of the repulsive interactions. Furthermore, we calculated the second virial (B2) coefficients from SAXS data, providing insights into how surface chemistry, solvent, and size influence pair potentials. Finally, we explore the influence of long-range interparticle interactions of PbS-Sn2S64- QDs on the morphology of films produced by drying or spin-coating colloidal solutions. The long-range repulsive term of PbS-Sn2S64- QDs promotes the formation of amorphous films, and screening the electrostatic repulsion by the addition of an electrolyte enables the formation of crystalline domains. These findings highlight the critical role of NC-NC interactions in tailoring the properties of functional materials made of colloidal NCs.

Strategies for Controlling Emission Anisotropy in Lead Halide Perovskite Emitters for LED Outcoupling Enhancement

In the last decade, momentous progress in lead halide perovskite (LHP) light-emitting diodes (LEDs) is witnessed as their external quantum efficiency (ηext) has increased from 0.1 to more than 30%. Indeed, perovskite LEDs (PeLEDs), which can in principle reach 100% internal quantum efficiency as they are not limited by the spin-statistics, are reaching their full potential and approaching the theoretical limit in terms of device efficiency. However, ≈70% to 85% of total generated photons are trapped within the devices through the dissipation pathways of the substrate, waveguide, and evanescent modes. To this end, numerous extrinsic and intrinsic light-outcoupling strategies are studied to enhance light-outcoupling efficiency (ηout). At the outset, various external and internal light outcoupling techniques are reviewed with specific emphasis on emission anisotropy and its role on ηout. In particular, the device ηext can be enhanced by up to 50%, taking advantage of the increased probability for photons outcoupled to air by effectively inducing horizontally oriented emission transition dipole moments (TDM) in the perovskite emitters. The role of the TDM orientation in PeLED performance and the factors allowing its rational manipulation are reviewed extensively. Furthermore, this account presents an in-depth discussion about the effects of the self-assembly of LHP colloidal nanocrystals (NCs) into superlattices on the NC emission anisotropy and optical properties.

Solution-processable ordered defect compound semiconductors for high-performance electronics

Solution-processable semiconductors hold promise in enabling applications requiring cost-effective electronics at scale but suffer from low performance limited by defects. We show that ordered defect compound semiconductor CuIn5Se8, which forms regular defect complexes with defect-pair compensation, can simultaneously achieve high performance and solution processability. CuIn5Se8 transistors exhibit defect-tolerant, band-like transport supplying an output current above 35 microamperes per micrometer, with a large on/off ratio greater than 106, a small subthreshold swing of 189 ± 21 millivolts per decade, and a high field-effect mobility of 58 ± 10 square centimeters per volt per second, with excellent uniformity and stability, superior to devices built on its less defective parent compound CuInSe2, analogous binary compound In2Se3, and other solution-deposited semiconductors. They can be monolithically integrated with carbon nanotube transistors to form high-speed and low-voltage three-dimensional complementary logic circuits and with micro-light-emitting diodes to realize high-resolution displays.

Quantitative photocurrent scanning probe microscopy on PbS quantum dot monolayers

Photoconductive atomic force microscopy can probe monolayers of PbS/perovskite quantum dots (QDs) with a contact area of 1-3 QDs in stable and reproducible acquisition conditions for I/V curves and photocurrent maps. From the measurements, quantitative values for the barrier height, built-in voltage, diffusion constant and ideality factor are deduced with high precision. The data analysis is based on modelling a superposition of the drift current of the photo-excited charges and a diffusion current across the interface barriers, providing physical insight into the underlying processes. Besides looking into PbS/perovskite on an indium tin oxide substrate, it is shown how the photocurrent is modified by changing either the QD ligand (to thiocyanate) or the substrate (to micro- and nanostructured gold). The dependence of the photocurrent on the light irradiance is found to follow a power law with an exponent of 0.64. Generally, quantitative measurements with high spatial resolution (on the single QD level) can provide significant insight into the processes in nanostructured hybrid optoelectronic components.

Anisotropic electronic coupling in three-dimensional assembly of CsPbBr3 quantum dots

Cesium lead halide (CsPbX3, X = Cl, Br, or I) perovskite quantum dots (PeQDs) show promise for next-generation optoelectronics. In this study, we controlled the electronic coupling between PeQD multilayers using a layer-by-layer method and dithiol linkers of varying structures. The energy shift of the first excitonic peak from monolayer to bilayer decreases exponentially with increasing interlayer spacer distance, indicating the resonant tunnelling effect. X-ray diffraction measurements revealed anisotropic inter-PeQD distances in multiple layers. Photoluminescence (PL) analysis showed lower energy emission in the in-plane direction due to the electronic coupling in the out-of-plane direction, supporting the anisotropic electronic state in the PeQD multilayers. Temperature-dependent PL and PL lifetimes indicated changes in exciton behaviour due to the delocalized electronic state in PeQD multilayers. Particularly, the electron-phonon coupling strength increased, and the exciton recombination rate decreased. This is the first study demonstrating controlled electronic coupling in a three-dimensional ordered structure, emphasizing the importance of the anisotropic electronic state for high-performance PeQDs devices.

Nonequilibrium Lattice Dynamics of Individual and Attached PbSe Quantum Dots under Photoexcitation

Quantum dot (QD) solids are emerging materials for many optoelectronic applications. To enhance interdot coupling and charge transport, surface ligands can be removed, allowing individual QDs to be attached along specific crystal orientations (termed "oriented attachment"). Optimizing the electronic and optical properties of QD solids demands a comprehensive understanding of the nanoscale energy flow in individual and attached QDs under photoexcitation. In this work, we employed ultrafast electron diffraction to directly measure how oriented attachment along ⟨100⟩ directions affects the nonequilibrium lattice dynamics of lead selenide QDs. The oriented attachment anisotropically alters the ultrafast energy relaxation along specific crystal axes. Along the ⟨100⟩ directions, both the lattice deformation and atomistic random motions are suppressed in comparison with those of individual QDs. Conversely, the effects are enhanced along the unattached ⟨111⟩ directions due to ligand removal. The oriented attachment switches the major lattice thermalization pathways from ⟨100⟩ to ⟨111⟩ directions.

Enhanced Performance of P-Channel CuIBr Thin-Film Transistor by ITO Surface Charge-Transfer Doping

The process development and optimization of p-type semiconductors and p-channel thin-film transistors (TFTs) are essential for the development of high-performance circuits. In this study, the Br-doped CuI (CuIBr) TFTs are proposed by the solution process to control copper vacancy generation and suppress excess holes formation in p-type CuI films and improve current modulation capabilities for CuI TFTs. The CuIBr films exhibit a uniform surface morphology and good crystalline quality. The on/off current (ION/IOFF) ratio of CuIBr TFTs increased from 103 to 106 with an increase in the Br doping ratio from 0 to 15%. Furthermore, the performance and operational stability of CuIBr TFTs are significantly enhanced by indium tin oxide (ITO) surface charge-transfer doping. The results obtained from the first-principles calculations well explain the electron-doping effect of ITO overlayer in CuIBr TFT. Eventually, the CuIBr TFT with 15% Br content exhibits a high ION/IOFF ratio of 3 × 106 and a high hole field-effect mobility (μFE) of 7.0 cm2 V-1 s-1. The band-like charge transport in CuIBr TFT is confirmed by the temperature-dependent measurement. This study paves the way for the realization of transparent complementary circuits and wearable electronics.

Orientation-Dependent Photoconductivity of Quasi-2D Nanocrystal Self-Assemblies: Face-Down, Edge-Up Versus Randomly Oriented Quantum Wells

Here, strongly orientation-dependent lateral photoconductivity of a CdSe monolayer colloidal quantum wells (CQWs) possessing short-chain ligands is reported. A controlled liquid-air self-assembly technique is utilized to deliberately engineer the alignments of CQWs into either face-down (FO) or edge-up (EO) orientation on the substrate as opposed to randomly oriented (RO) CQWs prepared by spin-coating. Adapting planar configuration metal-semiconductor-metal (MSM) photodetectors, it is found that lateral conductivity spans ≈2 orders of magnitude depending on the orientation of CQWs in the film in the case of utilizing short ligands. The long native ligands of oleic acid (OA) are exchanged with short-chain ligands of 2-ethylhexane-1-thiol (EHT) to reduce the inter-platelet distance, which significantly improved the photoresponsivity from 4.16, 0.58, and 4.79 mA W-1 to 528.7, 6.17, and 94.2 mA W-1, for the MSM devices prepared with RO, FO, and EO, before and after ligands exchange, respectively. Such CQW orientation control profoundly impacts the photodetector performance also in terms of the detection speed (0.061 s/0.074 s for the FO, 0.048 s/0.060 s for the EO compared to 0.10 s/0.16 s for the RO, for the rise and decay time constants, respectively) and the detectivity (1.7 × 1010, 2.3 × 1011, and 7.5 × 1011 Jones for the FO, EO, and RO devices, respectively) which can be further tailored for the desired optoelectronic device applications. Attributed to charge transportation in colloidal films being proportional to the number of hopping steps, these findings indicate that the solution-processed orientation of CQWs provides the ability to tune the photoconductivity of CQWs with short ligands as another degree of freedom to exploit and engineer their absorptive devices.

Nanocrystal Assemblies: Current Advances and Open Problems

We explore the potential of nanocrystals (a term used equivalently to nanoparticles) as building blocks for nanomaterials, and the current advances and open challenges for fundamental science developments and applications. Nanocrystal assemblies are inherently multiscale, and the generation of revolutionary material properties requires a precise understanding of the relationship between structure and function, the former being determined by classical effects and the latter often by quantum effects. With an emphasis on theory and computation, we discuss challenges that hamper current assembly strategies and to what extent nanocrystal assemblies represent thermodynamic equilibrium or kinetically trapped metastable states. We also examine dynamic effects and optimization of assembly protocols. Finally, we discuss promising material functions and examples of their realization with nanocrystal assemblies.

Tuning the Inter-Nanoplatelet Distance and Coupling Strength by Thermally Induced Ligand Decomposition

CdSe nanoplatelets (NPLs) are promising 2D semiconductors for optoelectronic applications, in which efficient charge transport properties are desirable. It is reported that thermal annealing constitutes an effective strategy to control the optical absorption and electrical properties of CdSe NPLs by tuning the inter-NPL distance. Combining optical absorption, transmission electron microscopy, and thermogravimetric analysis, it is revealed that the thermal decomposition of ligands (e.g., cadmium myristate) governs the inter-NPL distance and thus the inter-NPL electronic coupling strength. Employing ultrafast terahertz spectroscopy, it is shown that this enhanced electronic coupling increases both the free carrier generation efficiency and the short-range mobility in NPL solids. The results show a straightforward method of controlling the interfacial electronic coupling strength for developing functional optoelectronic devices through thermal treatments.

Long-Range Hot-Carrier Transport in Topologically Connected HgTe Quantum Dots

The utilization of hot carriers as a means to surpass the Shockley-Queasier limit represents a promising strategy for advancing highly efficient photovoltaic devices. Quantum dots, owing to their discrete energy states and limited multi-phonon cooling process, are regarded as one of the most promising materials. However, in practical implementations, the presence of numerous defects and discontinuities in colloidal quantum dot (CQD) films significantly curtails the transport distance of hot carriers. In this study, the harnessing of excess energies from hot-carriers is successfully demonstrated and a world-record carrier diffusion length of 15 µm is observed for the first time in colloidal systems, surpassing existing hot-carrier materials by more than tenfold. The observed phenomenon is attributed to the specifically designed honeycomb-like topological structures in a HgTe CQD superlattice, with its long-range periodicity confirmed by High-Resolution Transmission Electron Microscopy(HR-TEM), Selected Area Electron Diffraction(SAED) patterns, and low-angle X-ray diffraction (XRD). In such a superlattice, nonlocal hot carrier transport is supported by three unique physical properties: the wavelength-independent responsivity, linear output characteristics and microsecond fast photoresponse. These findings underscore the potential of HgTe CQD superlattices as a feasible approach for efficient hot carrier collection, thereby paving the way for practical applications in highly sensitive photodetection and solar energy harvesting.

Aging CsPbBr3 Nanocrystal Wafer for Ultralow Ionic Migration and Environmental Stability for Direct X-ray Detection

The outstanding photoelectric properties of perovskites demonstrate extreme promise for application in X-ray detection. However, the soft lattice of the perovskite results in severe ionic migration for three-dimensional materials, limiting the operation stability of perovskite X-ray detectors. Although ligand-decorated nanocrystals (NCs) exhibit significantly higher stability than three-dimensional perovskites, defects remaining on the interface of NCs could still trigger halide migration under a high bias due to the incomplete ligand decoration. Furthermore, it is still challenging to realize sufficient thickness of absorption layers based on NCs for X-ray detectors through traditional methods. Herein, we develop a centimeter-size and millimeter-thick wafer based on CsPbBr3 NCs through isostatic pressing for X-ray detectors, in which the interfacial defects of NCs are remedied by CsPb2Br5 during aging of wafer in ambient humidity. The wafer shows outstanding sensitivity (200 μC Gyair-1 cm-2) and ultralow dark current drift (1.78 × 10-8 nA cm-1 s-1 V-1 @ 400 V cm-1). Moreover, it shows storage stability with negligible performance degradation for 60 days in ambient humidity. Thus, aging perovskite NC wafers for X-ray detection holds huge potential for next-generation X-ray imaging plates.

Surrogate Modeling of the Relative Entropy for Inverse Design Using Smolyak Sparse Grids

Relative entropy minimization, a statistical-mechanics approach for finding potential energy functions that produce target structural ensembles, has proven to be a powerful strategy for the inverse design of nanoparticle self-assembly. For a given target structure, the gradient of the relative entropy with respect to the adjustable parameters of the potential energy function is computed by performing a simulation, and then these parameters are updated using iterative gradient-based optimization. Small parameter updates per iteration and many iterations can be required for numerical stability, but this incurs considerable computational expense because a new simulation must be performed to reevaluate the gradient at each iteration. Here, we investigate the use of surrogate modeling to decouple the process of minimizing the relative entropy from the computationally demanding process of determining its gradient. We approximate the relative-entropy gradient using Chebyshev polynomial interpolation on Smolyak sparse grids. Our approach potentially increases the robustness and computational efficiency of using the relative entropy for inverse design, primarily for physically informed potential energy functions that have a small number of adjustable parameters.

Facile Ligand Exchange of Ionic Ligand-Capped Amphiphilic Ag2S Nanocrystals for High Conductive Thin Films

A surface ligand modification of colloidal nanocrystals (NCs) is one of the crucial issues for their practical applications because of the highly insulating nature of native long-chain ligands. Herein, we present straightforward methods for phase transfer and ligand exchange of amphiphilic Ag2S NCs and the fabrication of highly conductive films. S-terminated Ag2S (S-Ag2S) NCs are capped with ionic octylammonium (OctAH+) ligands to compensate for surface anionic charge, S2-, of the NC core. An injection of polar solvent, formamide (FA), into S-Ag2S NCs dispersed in toluene leads to an additional envelopment of the charged S-Ag2S NC core by FA due to electrostatic stabilization, which allows its amphiphilic nature and results in a rapid and effective phase transfer without any ligand addition. Because the solvation by FA involves a dissociation equilibrium of the ionic OctAH+ ligands, controlling a concentration of OctAH+ enables this phase transfer to show reversibility. This underlying chemistry allows S-Ag2S NCs in FA to exhibit a complete ligand exchange to Na+ ligands. The S-Ag2S NCs with Na+ ligands show a close interparticle distance and compatibility for uniformly deposited thin films by a simple spin-coating method. In photoelectrochemical measurements with stacked Ag2S NCs on ITO electrodes, a 3-fold enhanced current response was observed for the ligand passivation of Na+ compared to OctAH+, indicating a significantly enhanced charge transport in the Ag2S NC film by a drastically reduced interparticle distance due to the Na+ ligands.

Self-Organized Phase-Composite Nanocrystal Solids with Superior Charge Transport

Interparticle electronic coupling is essential for self-assembled colloidal nanocrystal (NC) solid semiconductors to fulfill their wide-tunable electrical and optoelectrical properties, but it has been limited by disorders. Here, a disorder-tolerant coupling approach is presented by synthesizing self-organized NC solids based on amorphous/nanocrystalline phase-composites. The ZnO amorphous matrix, which infills the space between the less regularly ordered ZnO NCs, enables robust electronic coupling between neighboring NCs via the resonant wave function overlap, leading to a disorder-tolerant resonant conducting state. Field-effect transistors based on phase-composite semiconductors show delocalized band-like transport with superior field-effect mobility values (∼75 cm2 V-1 s-1), compared to amorphous or polycrystalline ZnO semiconductors. Furthermore, the broad amorphous matrix can mitigate interfacial defects between crystalline regions through atomic relaxation, in contrast to narrow grain boundaries in polycrystalline films, resulting in a significantly low interface trap density for phase-composite NC solids. Density function theory calculations and quantum transport simulations using the nonequilibrium Green's function formalism elucidate the origins of superior and highly disorder-tolerant electron transport in phase-composite NC solids. Our report introduces a new class of NC solids complementary to the colloidal counterpart and will be applicable to CMOS-compatible emerging device technologies.

Micrometer-Scale Carrier Transport in the Solid Film of Giant CdSe/CdS Nanocrystals Imaged by Transient Absorption Microscopy

For the practical applications in solar cells and photodetectors, semiconductor colloidal nanocrystals (NCs) are assembled into a high-concentration film with carrier transport characteristics, the full understanding and effective control of which are critical for the achievement of high light-to-electricity conversion efficiencies. Here we have applied transient absorption microscopy to the solid film of giant CdSe/CdS NCs and discovered that at high pump fluences the carrier transport could reach a long distance of ∼2 μm within ∼30 ps after laser pulse excitation. This intriguing behavior is attributed to the metal-insulator transition and the associated bandlike transport, which are promoted by the enhanced electronic coupling among neighboring NCs with extended wave functions overlap of the excited-state charge carriers. Besides providing fundamental transport information in the regime of high laser pump fluences, the above findings shed light on the rational design of high-power light detecting schemes based on colloidal NCs.

The Bright and Enlightening Science of Quantum Dots

The 2023 Nobel Prize in Chemistry was awarded to Alexei Ekimov, Louis Brus, and Moungi Bawendi for the discovery and development of quantum dots, an area of research ripe with exciting results in terms of both fundamental science and present and forthcoming applications. Quantum dots, with their colors and their intriguing properties, have fascinated and engaged generations of scientists over the last 40 years, including myself. I present here a brief historical perspective of the field, from my personal standpoint and with insights from my own career, along with an outlook on what I believe will be the most interesting future developments in the field.

Superstructures of water-dispersive hydrophobic nanocrystals: specific properties

Here, we describe water-soluble superstructures of hydrophobic nanocrystals that have been developed in recent years. We will also report on some of their properties which are still in their infancy. One of these structures, called "cluster structures", consists of hydrophobic 3D superlattices of Co or Au nanocrystals, covered with organic molecules acting like parachutes. The magnetic properties of Co "cluster structures" a retained when the superstructures is dispersed in aqueous solution. With Au "cluster structures", the longer wavelength optical scattered spectra are very broad and red-shifted, while at shorter wavelengths the localized surface plasmonic resonance of the scattered nanocrystals is retained. Moreover, the maximum of the long-wavelength signal spectra is linearly dependent on the increase in assembly size. The second superstructure was based on liquid-liquid instabilities favoring the formation of Fe3O4 nanocrystal shells (colloidosomes) filled or unfilled with Au 3D superlattices and also spherical solid crystal structures are called supraballs. Colloidosomes and supraballs in contact with cancer cells increase the density of nanocrystals in lysosomes and near the lysosomal membrane. Importantly, the structure of their organization is maintained in lysosomes for up to 8 days after internalization, while the initially dispersed hydrophilic nanocrystals are randomly aggregated. These two structures act as nanoheaters. Indeed, due to the dilution of the metallic phase, the penetration depth of visible light is much greater than that of homogeneous metallic nanoparticles of similar size. This allows for a high average heat load overall. Thus, the organic matrix acts as an internal reservoir for efficient energy accumulation within a few hundred picoseconds. A similar behavior was observed with colloidosomes, supraballs and "egg" structures, making these superstructures universal nanoheaters, and the same behavior is not observed when they are not dispersed in water (dried and deposited on a substrate). Note that colloidosomes and supraballs trigger local photothermal damage inaccessible to isolated nanocrystals and not predicted by global temperature measurements.

Chemical and Physical Properties of Photonic Noble-Metal Nanomaterials

Colloidal noble metal nanoparticles (NPs) are composed of metal cores and organic or inorganic ligand shells. These NPs support size- and shape-dependent plasmonic resonances. They can be assembled from dispersions into artificial metamolecules which have collective plasmonic resonances originating from coupled bright and dark optical electric and magnetic modes that form depending on the size and shape of the constituent NPs and their number, arrangement, and interparticle distance. NPs can also be assembled into extended 2D and 3D metamaterials that are glassy thin films or ordered thin films or crystals, also known as superlattices and supercrystals. The metamaterials have tunable optical properties that depend on the size, shape, and composition of the NPs, and on the number of NP layers and their interparticle distance. Interestingly, strong light-matter interactions in superlattices form plasmon polaritons. Tunable interparticle distances allow designer materials with dielectric functions tailorable from that characteristic of an insulator to that of a metal, and serve as strong optical absorbers or scatterers, respectively. In combination with lithography techniques, these extended assemblies can be patterned to create subwavelength NP superstructures and form large-area 2D and 3D metamaterials that manipulate the amplitude, phase, and polarization of transmitted or reflected light.

Remarkable Electrical Conductivity Increase and Pure Metallic Properties from Semiconducting Colloidal Nanocrystals by Cation Exchange for Solution-Processable Optoelectronic Applications

The authors report a strategic approach to achieve metallic properties from semiconducting CuFeS colloidal nanocrystal (NC) solids through cation exchange method. An unprecedentedly high electrical conductivity is realized by the efficient generation of charge carriers onto a semiconducting CuS NC template via minimal Fe exchange. An electrical conductivity exceeding 10 500 S cm^-1 (13 400 S cm^-1 at 2 K) and a sheet resistance of 17 Ω/sq at room temperature, which are among the highest values for solution-processable semiconducting NCs, are achieved successfully from bornite-phase CuFeS NC films possessing 10% Fe atom. The temperature dependence of the corresponding films exhibits pure metallic characteristics. Highly conducting NCs are demonstrated for a thermoelectric layer exhibiting a high power factor over 1.2 mW m^-1 K^-2 at room temperature, electrical wires for switching on light emitting diods (LEDs), and source-drain electrodes for p- and n-type organic field-effect transistors. Ambient stability, eco-friendly composition, and solution-processability further validate their sustainable and practical applicability. The present study provides a simple but very effective method for significantly increasing charge carrier concentrations in semiconducting colloidal NCs to achieve metallic properties, which is applicable to various optoelectronic devices.

Enabling metallic behaviour in two-dimensional superlattice of semiconductor colloidal quantum dots

Semiconducting colloidal quantum dots and their assemblies exhibit superior optical properties owing to the quantum confinement effect. Thus, they are attracting tremendous interest from fundamental research to commercial applications. However, the electrical conducting properties remain detrimental predominantly due to the orientational disorder of quantum dots in the assembly. Here we report high conductivity and the consequent metallic behaviour of semiconducting colloidal quantum dots of lead sulphide. Precise facet orientation control to forming highly-ordered quasi-2-dimensional epitaxially-connected quantum dot superlattices is vital for high conductivity. The intrinsically high mobility over 10 cm² V^-1 s^-1 and temperature-independent behaviour proved the high potential of semiconductor quantum dots for electrical conducting properties. Furthermore, the continuously tunable subband filling will enable quantum dot superlattices to be a future platform for emerging physical properties investigations, such as strongly correlated and topological states, as demonstrated in the moiré superlattices of twisted bilayer graphene.

Temperature-Controlled Reversible Formation and Phase Transformation of 3D Nanocrystal Superlattices Through In Situ Small-Angle X-ray Scattering

For decades, the spontaneous organization of nanocrystals into superlattices has captivated the scientific community. However, achieving direct control over the formation of the superlattice and its phase transformations has proven to be a grand challenge, often resulting in the generation of multiple symmetries under the same experimental conditions. Here, we achieve direct control over the formation of the superlattice and its phase transformations by modulating the thermal energy of a nanocrystal dispersion without relying on solvent evaporation. We follow the temperature-dependent dynamics of the self-assembly process using synchrotron-based small-angle X-ray scattering. When cooled below -24.5 °C, lead sulfide nanocrystals form micrometer-sized three-dimensional phase-pure body-centered cubic superlattices. When cooled below -35.1 °C, these superlattices undergo a collective diffusionless phase transformation that yields denser body-centered tetragonal phases. These structural changes can be reversed by increasing the temperature of the dispersion and may lead to the direct modulation of the optical properties of these artificial solids.

Colloidal Control of Branching in Metal Chalcogenide Semiconductor Nanostructures

Colloidal syntheses of metal chalcogenides yield nanostructures of various 1D, 2D, and 3D nanocrystals (NCs), including branched nanostructures (BNSs) of nanoflowers, tetrapods, octopods, nanourchins, and more. Efforts are continuously being made to understand the branching mechanism in colloidally prepared metal chalcogenides for tailor-making them into various morphologies for dedicated applications in solar cells, light-emitting diodes, stress sensor devices, and near-infrared photodetectors. The vital role of precursors and ligands has widely been recognized in directing nanocrystal morphology during the colloidal synthesis of metal chalcogenide nanostructures. Moreover, a few basic branching mechanisms in nanocrystals have also been derived from decades-long observations of branching in NCs. This Perspective (a) accounts for the mediation of branching in In₂S₃, PbS, MoSe₂, WSe_2, and WS₂; (b) analyzes the underlying mechanisms; and (c) gives a future perspective toward better controlling the BNSs' morphologies and their impact on applications.

The Dynamic Interaction of Surfactants with Colloidal Molybdenum Disulfide Nanosheets Calls for Thermodynamic Stabilization by Solvents

Top-down liquid-phase exfoliation (LPE) and bottom-up hot-injection synthesis are scalable methods to produce colloids of two-dimensional (2D) van der Waals (vdW) solids. Generally thought off as two entirely different fields, we show that similar stabilization mechanisms apply to colloids of molybdenum disulfide (MoS₂) produced by both methods. By screening the colloidal stability of MoS₂ produced in a hot-injection synthesis in a wide range of solvents, we observe that colloidal stability can be understood based on solution thermodynamics, wherein matching the solubility parameter of solvent and nanomaterial maximizes colloidal stability. Identical to MoS₂ produced through LPE, optimal solvents to disperse MoS₂ produced from the bottom-up have similar solubility parameters of ≈22 MPa^1/2 and include aromatic solvents with polar functionalities, such as o-dichlorobenzene, and polar aprotic solvents, such as N,N-dimethylformamide. We further complemented our findings by nuclear magnetic resonance (NMR) spectrscopy, highlighting that organic surfactants, such as oleylamine and oleic acid, have a minimal affinity toward the nanocrystal surface and engage in a highly dynamic adsorption/desorption equilibrium. We thus conclude that hot injection yields MoS₂ colloids with comparable surfaces as those produced by LPE. These similarities might offer the prospect of using established procedures developed for LPE nanomaterials to postprocess colloidally synthesized dispersions of 2D colloids as processable inks.

Self-Assembled TaOX/2H-TaS2 as a van der Waals Platform of a Multilevel Memristor Circuit Integrated with a β-Ga2O3 Transistor

Two-dimensional (2D)-layered material tantalum disulfide (2H-TaS₂) is known to be a van der Waals conductor at room temperature. Here, 2D-layered TaS₂ has been partially oxidized by utraviolet-ozone (UV-O₃) annealing to form a 12-nm-thin TaO_X on conducting TaS₂, so that the TaO_X/2H-TaS₂ structure might be self-assembled. Utilizing the TaO_X/2H-TaS₂ structure as a platform, each device of a β-Ga₂O₃ channel MOSFET and a TaO_X memristor has been successfully fabricated. An insulator structure of Pt/TaO_X/2H-TaS₂ shows good a dielectric constant (k ∼ 21) and strength (∼3 MV/cm) of achieved TaO_X, which is enough to support a β-Ga₂O₃ transistor channel. Based on the quality of TaO_X and low trap density of the TaO_X/β-Ga₂O₃ interface, which is achieved via another UV-O₃ annealing, excellent device properties such as little hysteresis (<∼0.04 V), band-like transport, and a steep subthreshold swing of ∼85 mV/dec are achieved. With a Cu electrode on top of the TaO_X/2H-TaS₂ structure, the TaO_X acts as a memristor operating around ∼2 V for nonvolatile bipolar and unipolar mode memories. The functionalities of the TaO_X/2H-TaS₂ platform become more distinguished finally when the Cu/TaO_X/2H-TaS₂ memristor and β-Ga₂O₃ MOSFET are integrated to form a resistive memory switching circuit. The circuit nicely demonstrates the multilevel memory functions.

Carrier Transport in Colloidal Quantum Dot Intermediate Band Solar Cell Materials Using Network Science

Colloidal quantum dots (CQDs) have been proposed to obtain intermediate band (IB) materials. The IB solar cell can absorb sub-band-gap photons via an isolated IB within the gap, generating extra electron-hole pairs that increase the current without degrading the voltage, as has been demonstrated experimentally for real cells. In this paper, we model the electron hopping transport (HT) as a network embedded in space and energy so that a node represents the first excited electron state localized in a CQD while a link encodes the Miller-Abrahams (MA) hopping rate for the electron to hop from one node (=state) to another, forming an "electron-HT network". Similarly, we model the hole-HT system as a network so that a node encodes the first hole state localized in a CQD while a link represents the MA hopping rate for the hole to hop between nodes, leading to a "hole-HT network". The associated network Laplacian matrices allow for studying carrier dynamics in both networks. Our simulations suggest that reducing both the carrier effective mass in the ligand and the inter-dot distance increases HT efficiency. We have found a design constraint: It is necessary for the average barrier height to be larger than the energetic disorder to not degrade intra-band absorption.

2D II-VI Semiconductor Nanoplatelets: From Material Synthesis to Optoelectronic Integration

The field of colloidal synthesis of semiconductors emerged 40 years ago and has reached a certain level of maturity thanks to the use of nanocrystals as phosphors in commercial displays. In particular, II-VI semiconductors based on cadmium, zinc, or mercury chalcogenides can now be synthesized with tailored shapes, composition by alloying, and even as nanocrystal heterostructures. Fifteen years ago, II-VI semiconductor nanoplatelets injected new ideas into this field. Indeed, despite the emergence of other promising semiconductors such as halide perovskites or 2D transition metal dichalcogenides, colloidal II-VI semiconductor nanoplatelets remain among the narrowest room-temperature emitters that can be synthesized over a wide spectral range, and they exhibit good material stability over time. Such nanoplatelets are scientifically and technologically interesting because they exhibit optical features and production advantages at the intersection of those expected from colloidal quantum dots and epitaxial quantum wells. In organic solvents, gram-scale syntheses can produce nanoparticles with the same thicknesses and optical properties without inhomogeneous broadening. In such nanoplatelets, quantum confinement is limited to one dimension, defined at the atomic scale, which allows them to be treated as quantum wells. In this review, we discuss the synthetic developments, spectroscopic properties, and applications of such nanoplatelets. Covering growth mechanisms, we explain how a thorough understanding of nanoplatelet growth has enabled the development of nanoplatelets and heterostructured nanoplatelets with multiple emission colors, spatially localized excitations, narrow emission, and high quantum yields over a wide spectral range. Moreover, nanoplatelets, with their large lateral extension and their thin short axis and low dielectric surroundings, can support one or several electron-hole pairs with large exciton binding energies. Thus, we also discuss how the relaxation processes and lifetime of the carriers and excitons are modified in nanoplatelets compared to both spherical quantum dots and epitaxial quantum wells. Finally, we explore how nanoplatelets, with their strong and narrow emission, can be considered as ideal candidates for pure-color light emitting diodes (LEDs), strong gain media for lasers, or for use in luminescent light concentrators.

Approaching Bulk Mobility in PbSe Colloidal Quantum Dots 3D Superlattices

3D superlattices made of colloidal quantum dots are a promising candidate for the next generation of optoelectronic devices as they are expected to exhibit a unique combination of tunable optical properties and coherent electrical transport through minibands. While most of the previous work was performed on 2D arrays, the control over the formation of these systems is lacking, where limited long-range order and energetical disorder have so far hindered the potential of these metamaterials, giving rise to disappointing transport properties. Here, it is reported that nanoscale-level controlled ordering of colloidal quantum dots in 3D and over large areas allows the achievement of outstanding transport properties. The measured electron mobilities are the highest ever reported for a self-assembled solid of fully quantum-confined objects. This ultimately demonstrates that optoelectronic metamaterials with highly tunable optical properties (in this case in the short-wavelength infrared spectral range) and charge mobilities approaching that of bulk semiconductor can be obtained. This finding paves the way toward a new generation of optoelectronic devices.

Supramolecular Semiconductivity through Emerging Ionic Gates in Ion-Nanoparticle Superlattices

The self-assembly of nanoparticles driven by small molecules or ions may produce colloidal superlattices with features and properties reminiscent of those of metals or semiconductors. However, to what extent the properties of such supramolecular crystals actually resemble those of atomic materials often remains unclear. Here, we present coarse-grained molecular simulations explicitly demonstrating how a behavior evocative of that of semiconductors may emerge in a colloidal superlattice. As a case study, we focus on gold nanoparticles bearing positively charged groups that self-assemble into FCC crystals via mediation by citrate counterions. In silico ohmic experiments show how the dynamically diverse behavior of the ions in different superlattice domains allows the opening of conductive ionic gates above certain levels of applied electric fields. The observed binary conductive/nonconductive behavior is reminiscent of that of conventional semiconductors, while, at a supramolecular level, crossing the "band gap" requires a sufficient electrostatic stimulus to break the intermolecular interactions and make ions diffuse throughout the superlattice's cavities.

Surface passivation of intensely luminescent all-inorganic nanocrystals and their direct optical patterning

All-inorganic nanocrystals (NCs) are of great importance in a range of electronic devices. However, current all-inorganic NCs suffer from limitations in their optical properties, such as low fluorescence efficiencies. Here, we develop a general surface treatment strategy to obtain intensely luminescent all-inorganic NCs (ILANs) by using designed metal salts with noncoordinating anions that play a dual role in the surface treatment process: (i) removing the original organic ligands and (ii) binding to unpassivated Lewis basic sites to preserve the photoluminescent (PL) properties of the NCs. The absolute photoluminescence quantum yields (PLQYs) of red-emitting CdSe/ZnS NCs, green-emitting CdSe/CdZnSeS/ZnS NCs and blue-emitting CdZnS/ZnS NCs in polar solvents are 97%, 80% and 72%, respectively. Further study reveals that the passivated Lewis basic sites of ILANs by metal cations boost the efficiency of radiative recombination of electron-hole pairs. While the passivation of Lewis basic sites leads to a high PLQY of ILANs, the exposed Lewis acidic sites provide the possibility for in situ tuning of the functions of NCs, creating opportunities for direct optical patterning of functional NCs with high resolution.

High-operating-temperature mid-infrared photodetectors via quantum dot gradient homojunction

Due to thermal carriers generated by a narrow mid-infrared energy gap, cooling is always necessary to achieve ideal photodetection. In quantum dot (QD), the electron thermal generation should be reduced with quantum confinement in all three dimensions. As a result, there would be a great potential to realize high-operating-temperature (HOT) QD mid-IR photodetectors, though not yet achieved. Taking the advantages of colloidal nanocrystals' solution processability and precise doping control by surface dipoles, this work demonstrates a HOT mid-infrared photodetector with a QD gradient homojunction. The detector achieves background-limited performance with D^* = 2.7 × 10¹¹ Jones on 4.2 μm at 80 K, above 10¹¹ Jones until 200 K, above 10¹⁰ Jones until 280 K, and 7.6 × 10⁹ Jones on 3.5 μm at 300 K. The external quantum efficiency also achieves more than 77% with responsivity 2.7 A/W at zero bias. The applications such as spectrometers, chemical sensors, and thermal cameras, are also approved, which motivate interest in low-cost, solution-processed and high-performance mid-infrared photodetection beyond epitaxial growth bulk photodetectors.

Long-Range Charge Transport via Redox Ligands in Quantum Dot Assemblies

We present a strategy to actively engineer long-range charge transport in colloidal quantum dot assemblies by using ligand functionalities that introduce electronic states and provide a path for carrier transfer. This is a shift away from the use of inactive spacers to modulate charge transport through the lowering of the tunneling barrier for interparticle carrier transfer. This is accomplished with the use of electronically coupled redox ligands by which a self-exchange chain reaction takes place and long-range charge transport is enabled across the film. We identified the different modes of charge transport in these quantum dot/redox ligand assemblies, their energetic position and kinetics, and explain how to rationally manipulate them through modulation of the Fermi level and redox ligand coverage.

High-Mobility Hole Transport in Single-Grain PbSe Quantum Dot Superlattice Transistors

Epitaxially-fused superlattices of colloidal quantum dots (QD epi-SLs) may exhibit electronic minibands and high-mobility charge transport, but electrical measurements of epi-SLs have been limited to large-area, polycrystalline samples in which superlattice grain boundaries and intragrain defects suppress/obscure miniband effects. Systematic measurements of charge transport in individual, highly-ordered epi-SL grains would facilitate the study of minibands in QD films. Here, we demonstrate the air-free fabrication of microscale field-effect transistors (μ-FETs) with channels consisting of single PbSe QD epi-SL grains (2-7 μm channel dimensions) and analyze charge transport in these single-grain devices. The eight devices studied show p-channel or ambipolar transport with a hole mobility as high as 3.5 cm2 V-1 s-1 at 290 K and 6.5 cm2 V-1 s-1 at 170-220 K, one order of magnitude larger than that of previous QD solids. The mobility peaks at 150-220 K, but device hysteresis at higher temperatures makes the true mobility-temperature curve uncertain and evidence for miniband transport inconclusive.

Indium arsenide quantum dots: an alternative to lead-based infrared emitting nanomaterials

Colloidal quantum dots (QDs) emitting in the infrared (IR) are promising building blocks for numerous photonic, optoelectronic and biomedical applications owing to their low-cost solution-processability and tunable emission. Among them, lead- and mercury-based QDs are currently the most developed materials. Yet, due to toxicity issues, the scientific community is focusing on safer alternatives. In this regard, indium arsenide (InAs) QDs are one of the best candidates as they can absorb and emit light in the whole near infrared spectral range and they are RoHS-compliant, with recent trends suggesting that there is a renewed interest in this class of materials. This review focuses on colloidal InAs QDs and aims to provide an up-to-date overview spanning from their synthesis and surface chemistry to post-synthesis modifications. We provide a comprehensive overview from initial synthetic methods to the most recent developments on the ability to control the size, size distribution, electronic properties and carrier dynamics. Then, we describe doping and alloying strategies applied to InAs QDs as well as InAs based heterostructures. Furthermore, we present the state-of-the-art applications of InAs QDs, with a particular focus on bioimaging and field effect transistors. Finally, we discuss open challenges and future perspectives.

Polymer-like Inorganic Double Helical van der Waals Semiconductor

In high-performance flexible and stretchable electronic devices, conventional inorganic semiconductors made of rigid and brittle materials typically need to be configured into geometrically deformable formats and integrated with elastomeric substrates, which leads to challenges in scaling down device dimensions and complexities in device fabrication and integration. Here we report the extraordinary mechanical properties of the newly discovered inorganic double helical semiconductor tin indium phosphate. This spiral-shape double helical crystal shows the lowest Young's modulus (13.6 GPa) among all known stable inorganic materials. The large elastic (>27%) and plastic (>60%) bending strains are also observed and attributed to the easy slippage between neighboring double helices that are coupled through van der Waals interactions, leading to the high flexibility and deformability among known semiconducting materials. The results advance the fundamental understanding of the unique polymer-like mechanical properties and lay the foundation for their potential applications in flexible electronics and nanomechanics disciplines.

Bandlike Transport in FaPbBr3 Quantum Dot Phototransistor with High Hole Mobility and Ultrahigh Photodetectivity

Halide perovskites have been widely explored for numerous optoelectronic applications among which phototransistors have appeared as one of the most promising light signal detectors. However, it is still a great challenge to endow halide perovskites with both mobility and high photosensitivity because of their high sensitivity to moisture in ambient atmosphere. Here, we explore an FAPbBr₃ perovskite quantum dot (QD) phototransistor with bandlike charge transport and measure a dark hole mobility of 14.2 cm² V^-1 s^-1 at ambient atmosphere. Attaining both high mobility and good optical figures of merit, a detectivity of ∼10¹⁶ Jones is achieved, which is a record for halide perovskite nanocrystals. Simple A-site salt (FABr) treatments offer a mechanism for connecting between perovskite QDs for better charge transfer in high-quality devices. All of these important properties are superior to most advanced inorganic semiconductor phototransistors, indicating a promising future in optoelectronic applications.

Optical Absorption in N-Dimensional Colloidal Quantum Dot Arrays: Influence of Stoichiometry and Applications in Intermediate Band Solar Cells

We present a theoretical atomistic study of the optical properties of non-toxic InX (X = P, As, Sb) colloidal quantum dot arrays for application in photovoltaics. We focus on the electronic structure and optical absorption and on their dependence on array dimensionality and surface stoichiometry motivated by the rapid development of experimental techniques to achieve high periodicity and colloidal quantum dot characteristics. The homogeneous response of colloidal quantum dot arrays to different light polarizations is also investigated. Our results shed light on the optical behaviour of these novel multi-dimensional nanomaterials and identify some of them as ideal building blocks for intermediate band solar cells.

A Flexible Artificial Sensory Nerve Enabled by Nanoparticle-Assembled Synaptic Devices for Neuromorphic Tactile Recognition

Tactile perception enabled by somatosensory system in human is essential for dexterous tool usage, communication, and interaction. Imparting tactile recognition functions to advanced robots and interactive systems can potentially improve their cognition and intelligence. Here, a flexible artificial sensory nerve that mimics the tactile sensing, neural coding, and synaptic processing functions in human sensory nerve is developed to achieve neuromorphic tactile recognition at device level without relying on algorithms or computing resources. An interfacial self-assembly technique, which produces uniform and defect-less thin film of semiconductor nanoparticles on arbitrary substrates, is employed to prepare the flexible synaptic device. The neural facilitation and sensory memory characteristics of the proton-gating synaptic device enable this system to identify material hardness during robotic grasping and recognize tapping patterns during tactile interaction in a continuous, real-time, high-accuracy manner, demonstrating neuromorphic intelligence and recognition capabilities. This artificial sensory nerve produced in wearable and portable form can be readily integrated with advanced robots and smart human-machine interfaces for implementing human-like tactile cognition in neuromorphic electronics toward robotic and wearable applications.

Ultrafast exciton transport at early times in quantum dot solids

Quantum dot (QD) solids are an emerging platform for developing a range of optoelectronic devices. Thus, understanding exciton dynamics is essential towards developing and optimizing QD devices. Here, using transient absorption microscopy, we reveal the initial exciton dynamics in QDs with femtosecond timescales. We observe high exciton diffusivity (~10² cm² s^-1) in lead chalcogenide QDs within the first few hundred femtoseconds after photoexcitation followed by a transition to a slower regime (~10^-1-1 cm² s^-1). QD solids with larger interdot distances exhibit higher initial diffusivity and a delayed transition to the slower regime, while higher QD packing density and heterogeneity accelerate this transition. The fast transport regime occurs only in materials with exciton Bohr radii much larger than the QD sizes, suggesting the transport of delocalized excitons in this regime and a transition to slower transport governed by exciton localization. These findings suggest routes to control the optoelectronic properties of QD solids.

Triethyl-Borates as Surfactants to Stabilize Semiconductor Nanoplatelets in Polar Solvents and to Tune Their Optical Properties

Stabilizing nanocrystals (NCs) with high fluorescence quantum efficiency in suitable solvents and tuning of their optical properties precisely are critical for designing and assembling optoelectrical devices. Here, we demonstrated that by replacing the original X-type ligand (R-COO-) with triethylborate (TEB), zinc-blend structure nanoplatelets (Zb-NPLs) turn from hydrophobic to hydrophilic and are quite stable in polar solvents. More importantly, a large shift of 253 meV is observed for the TEB-passivated NPLs, which can be attributed to the strain of the crystal lattice and the electron or hole delocalizing into the ligand shell. It is worth noting that unlike conventional inorganic ligands, such as metal chalcogenide complexes or halides that quench fluorescence, TEB-treated NPLs maintain 100% of their original brightness in polar solvents with a slight increase in full width at half maximum (FWHM, 32 nm). Furthermore, we explored the possibility of employing TEB as surface ligands for NPLs with different thicknesses and compositions. We believe the discovery of new surface chemistry using borate-related ligands can greatly expand the potential application areas of NPLs.

Insight into morphology dependent charge carrier dynamics in ZnSe-CdS nanoheterostructures

Semiconductor nanoheterostructures (NHSs) are being increasingly used for the photocatalytic conversion of solar energy in which photo-induced charge separation is an essential step and hence it is necessary to understand the effect of various factors such as size, shape, and composition on the charge transfer dynamics. Ultrafast transient absorption spectroscopy is used to investigate the nature and dynamics of photo-induced charge transfer processes in ZnSe-CdS NHSs of different morphologies such as nanospheres (NSs), nanorods (NRs), and nanoplates (NPs). It demonstrates the fast separation of charge carriers and localization of both charges in adjacent semiconductors, resulting in the formation of a charge-separated (CS) state. The lifetime of the charge-separated state follows the order of NSs < NPs < NRs, emphasizing the effect of morphology on the enhancement of photo-induced charge separation and suppression of backward recombination. The separated charge carriers have been utilized in visible light driven hydrogen production and the hydrogen generation activity follows the same order as that for the lifetime of the CS state, underlining the role of charge separation efficiency. Therefore, the variation of the morphology of NHSs plays a significant role in their charge carrier dynamics and hence the photocatalytic hydrogen production activity.

Doping Colloidal Quantum Dot Materials and Devices for Photovoltaics

Colloidal semiconductor nanocrystals have generated tremendous interest because of their solution processability and robust tunability. Among such nanocrystals, the colloidal quantum dot (CQD) draws the most attention for its well-known quantum size effects. In the last decade, applications of CQDs have been booming in electronics and optoelectronics, especially in photovoltaics. Electronically doped semiconductors are critical in the fabrication of solar cells, because carefully designed band structures are able to promote efficient charge extraction. Unlike conventional semiconductors, diffusion and ion implantation technologies are not suitable for doping CQDs. Therefore, researchers have creatively developed alternative doping methods for CQD materials and devices. In order to provide a state-of-the-art summary and comprehensive understanding to this research community, we focused on various doping techniques and their applications for photovoltaics and demystify them from different perspectives. By analyzing two classes of CQDs, lead chalcogenide CQDs and perovskite CQDs, we compared different working scenarios of each technique, summarized the development in this field, and raised our own future perspectives.

Self-assembly of nanocrystals into strongly electronically coupled all-inorganic supercrystals

Colloidal nanocrystals of metals, semiconductors, and other functional materials can self-assemble into long-range ordered crystalline and quasicrystalline phases, but insulating organic surface ligands prevent the development of collective electronic states in ordered nanocrystal assemblies. We reversibly self-assembled colloidal nanocrystals of gold, platinum, nickel, lead sulfide, and lead selenide with conductive inorganic ligands into supercrystals exhibiting optical and electronic properties consistent with strong electronic coupling between the constituent nanocrystals. The phase behavior of charge-stabilized nanocrystals can be rationalized and navigated with phase diagrams computed for particles interacting through short-range attractive potentials. By finely tuning interparticle interactions, the assembly was directed either through one-step nucleation or nonclassical two-step nucleation pathways. In the latter case, the nucleation was preceded by the formation of two metastable colloidal fluids.