Hygroscopic compounds in spider aggregate glue remove interfacial water to maintain adhesion in humid conditions

The sticky truth: how spider predation success depends on their prey's body surface

Spiders are prominent predators for insects, with which they have a close co-evolutionary history. Manifold capture techniques have evolved, with spider webs being one of most well-known traps in the world. Many webs include specialised threads, bearing either glue or cribellate nanofibres as adhesive to capture prey. Some webs, such as the sheet webs of Tarantulae, have no such intricate threads. The adhesion of gluey threads has been extensively studied already, but often on artificial surfaces. However, recent studies discovered that adhesion of cribellate nanofibres increases massively after contact with insect cuticular hydrocarbons (CHCs). This raises the question whether insect CHCs generally influence prey capture. We compared the adhesion of cribellate, ecribellate gluey and ecribellate non-specialised threads to either uncoated or CHC-coated foil, or native prey body surfaces. We found an influence of CHCs on all silken threads, but with different outcomes. CHC presence, its composition as well as the surface structure can impact the final adhesion force positively or negatively, depending on the thread type. In extreme cases, the adhesion was reduced to nearly zero (e.g. for gluey capture threads in contact with real prey). Thus, prey influence on adhesion is not limited to cribellate capture threads, but is a universal influence on adhesion of spider silken capture threads. Future studies should consider both insect surface chemistry and surface structure when assessing the effectiveness of capture thread types in an ecological and evolutionary context.

Role of Surface Dipole Alignment in Modulating Cellular Activities on Poly(vinylidene fluoride)

Understanding and controlling the surface properties of bioscaffolds are crucial for regulating cell adhesion and proliferation behaviors. We here focused on poly(vinylidene fluoride) (PVDF), in which polymer chains are oriented through poling treatment to form a polar β-form crystal. The surface aggregation states of uniaxially stretched PVDF films subjected to poling treatment were investigated based on water contact angle measurements and sum-frequency generation spectroscopy. During poling treatment under a sufficiently strong electric field, the dipole moments of β-form crystals, which are inherently aligned within each crystalline domain, become more uniformly oriented across the entire film. As a result, the surface resists structural reorganization even upon exposure to water. This stable surface, which maintains its aggregation states despite environmental changes, was found to promote cell adhesion and proliferation, as well as protein adsorption. Our findings contribute to a deeper understanding of the relationship between the aggregation states on polymer scaffold surfaces and protein interactions, ultimately advancing insights into cell behaviors.

Advances in Adhesive Materials for Oral and Maxillofacial Soft Tissue Diseases

Oral diseases represent a prevalent global health burden, profoundly affecting patients' quality of life. Given the involvement of oral mucosa and muscles in diverse physiological functions, coupled with clinical aesthetics considerations, repairing oral and maxillofacial soft tissue defects poses a formidable challenge. Wet-adhesive materials are regarded as promising oral repair materials due to their unique advantages in easily overcoming physical and biological barriers in the oral cavity. This review first introduces the intricate wet-state environment prevalent in the oral cavity, meticulously explaining the fundamental physical and chemical adhesion mechanisms that underpin adhesive materials. It then comprehensively summarizes the diverse types of adhesives utilized in stomatology, encompassing polysaccharide, protein, and synthetic polymer adhesive materials. The review further evaluates the latest research advancements in utilizing these materials to treat various oral and maxillofacial soft tissue diseases, including oral mucosal diseases, periodontitis, peri-implantitis, oral and maxillofacial skin defects, and maxillofacial tumors. Finally, it also highlights the promising future prospects and pivotal challenges related to stomatology application of multifunctional adhesive materials.

Water has different effects on adhesive strength during placement versus loading of spider silk attachment discs

Spiders use piriform silk attachment discs to adhere threads during web construction and to secure safety lines. Water could degrade attachment disc adhesion by either interfering with placement of the discs or later reducing adhesion during loading. We tested the effect of water on the adhesion of attachment discs for the spider Latrodectus hesperus, which spins webs in mostly dry environments. We compared adhesion for discs spun on wet versus dry glass that were subsequently loaded in either wet or dry conditions. Attachment discs placed on wet glass showed similar adhesion to discs placed on dry glass. However, water significantly decreased both peak force of adhesion and work of adhesion when loading occurred under wet conditions, regardless of initial placement conditions. Furthermore, failure mode shifted from rupture of draglines in dry loading conditions to adhesive failure of discs in wet loading conditions. Our results show the importance of considering both the conditions in which biological structures are produced and those in which the structures perform as potentially independent factors for performance. Our results also suggest that adhesion in wet conditions can challenge some spiders, potentially leading to specialization of attachment discs for riparian or aquatic species.

Hydrogel-Enhanced Autologous Chondrocyte Implantation for Cartilage Regeneration-An Update on Preclinical Studies

Autologous chondrocyte implantation (ACI) and matrix-induced ACI (MACI) have demonstrated improved clinical outcomes and reduced revision rates for treating osteochondral and chondral defects. However, their ability to achieve lasting, fully functional repair remains limited. To overcome these challenges, scaffold-enhanced ACI, particularly utilizing hydrogel-based biomaterials, has emerged as an innovative strategy. These biomaterials are intended to mimic the biological composition, structural organization, and biomechanical properties of native articular cartilage. This review aims to provide comprehensive and up-to-date information on advancements in hydrogel-enhanced ACI from the past decade. We begin with a brief introduction to cartilage biology, mechanisms of cartilage injury, and the evolution of surgical techniques, particularly looking at ACI. Subsequently, we review the diversity of hydrogel scaffolds currently undergoing development and evaluation in preclinical studies for articular cartilage regeneration, emphasizing chondrocyte-laden hydrogels applicable to ACI. Finally, we address the key challenges impeding effective clinical translation, with particular attention to issues surrounding fixation and integration, aiming to inform and guide the future progression of tissue engineering strategies.

Glucose-responsive, self-healing, wet adhesive and multi-biofunctional hydrogels for diabetic wound healing

Diabetic wounds are serious clinical complications which manifest wet condition due to the mass exudate, along with disturbed regulation of inflammation, severe oxidative stress and repetitive bacterial infection. Existing treatments for diabetic wounds remain unsatisfactory due to the lack of ideal dressings that encompass mechanical performance, adherence to moist tissue surfaces, quick repair, and diverse therapeutic benefits. Herein, we fabricated a wet adhesive, self-healing, glucose-responsive drug releasing hydrogel with efficient antimicrobial and pro-healing properties for diabetic wound treatment. PAE hydrogel was constructed with poly(acrylic acid-co-acrylamide) (AA-Am) integrated with a dynamic E-F crosslinker, which consisted of epigallocatechin gallate (EGCG) and 4-(2-acrylamidoethylcarbamoyl)-3-fluorophenylboronic acid (AFPBA). Due to the dynamic crosslinking nature of boronate esters, abundant catechol groups and hydrogen bonding, PAE hydrogel demonstrated excellent mechanical properties with about 1000 % elongation, robust adhesion to moist tissues, fast self-healing, and absorption of biofluids of 10 times of its own weight. Importantly, PAE hydrogel exhibited sustained and glucose-responsive release of EGCG. Together, the bioactive PAE hydrogel had effective antibacterial, antioxidative, and anti-inflammatory properties in vitro, and accelerated diabetic wound healing in rats via reducing tissue-inflammatory response, enhancing angiogenesis, and reprogramming of macrophages. Overall, this versatile hydrogel provides a straightforward solution for the treatment of diabetic wound, and shows potential for other wound-related application scenarios.

From fibres to adhesives: evolution of spider capture threads from web anchors by radical changes in silk gland function

Spider webs that serve as snares are one of the most fascinating and abundant type of animal architectures. In many cases they include an adhesive coating of silk lines-so-called viscid silk-for prey capture. The evolutionary switch from silk secretions forming solid fibres to soft aqueous adhesives remains an open question in the understanding of spider silk evolution. Here we functionally and chemically characterized the secretions of two types of silk glands and their behavioural use in the cellar spider, Pholcus phalangioides. Both being derived from the same ancestral gland type that produces fibres with a solidifying glue coat, the two types produce respectively a quickly solidifying glue applied in thread anchorages and prey wraps, or a permanently tacky glue deployed in snares. We found that the latter is characterized by a high concentration of organic salts and reduced spidroin content, showing up a possible pathway for the evolution of viscid properties by hygroscopic-salt-mediated hydration of solidifying adhesives. Understanding the underlying molecular basis for such radical switches in material properties not only helps to better understand the evolutionary origins and versatility of ecologically impactful spider web architectures, but also informs the bioengineering of spider silk-based products with tailored properties.

Black phosphorus boosts wet-tissue adhesion of composite patches by enhancing water absorption and mechanical properties

Wet-tissue adhesives have long been attractive materials for realizing complicated biomedical functions. However, the hydration film on wet tissues can generate a boundary, forming hydrogen bonds with the adhesives that weaken adhesive strength. Introducing black phosphorus (BP) is believed to enhance the water absorption capacity of tape-type adhesives and effectively eliminate hydration layers between the tissue and adhesive. This study reports a composite patch integrated with BP nanosheets (CPB) for wet-tissue adhesion. The patch's improved water absorption and mechanical properties ensure its immediate and robust adhesion to wet tissues. Various bioapplications of CPB are demonstrated, such as rapid hemostasis (within ~1-2 seconds), monitoring of physical-activity and prevention of tumour-recurrence, all validated via in vivo studies. Given the good practicability, histocompatibility and biodegradability of CPB, the proposed patches hold significant promise for a wide range of biomedical applications.

Multifunctional wet-adhesive chitosan/acrylic conduit for sutureless repair of peripheral nerve injuries

The incidence of peripheral nerve injury (PNI) is high worldwide, and a poor prognosis is common. Surgical closure and repair of the affected area are crucial to ensure the effective treatment of peripheral nerve injuries. Despite being the standard treatment approach, reliance on sutures to seal the severed nerve ends introduces several limitations and restrictions. This technique is intricate and time-consuming, and the application of threading and punctate sutures may lead to tissue damage and heightened tension concentrations, thus increasing the risk of fixation failure and local inflammation. This study aimed to develop easily implantable chitosan-based peripheral nerve repair conduits that combine acrylic acid and cleavable N-hydroxysuccinimide to reduce nerve damage during repair. In ex vivo tissue adhesion tests, the conduit achieved maximal interfacial toughness of 705 J m-2 ± 30 J m-2, allowing continuous bridging of the severed nerve ends. Adhesive repair significantly reduces local inflammation caused by conventional sutures, and the positive charge of chitosan disrupts the bacterial cell wall and reduces implant-related infections. This promises to open new avenues for sutureless nerve repair and reliable medical implants.

Switchable adhesive films of pullulan loaded with a deep eutectic solvent-curcumin formulation for the photodynamic treatment of drug-resistant skin infections

Antimicrobial photodynamic therapy (aPDT) is a potent tool to surpass the global rise of antimicrobial resistance; still, the effective topical administration of photosensitizers remains a challenge. Biopolymer-based adhesive films can safely extend the residence time of photosensitizers. However, their wide application is narrowed by their limited water absorption capacity and gel strength. In this study, pullulan-based films with a switchable character (from a solid film to an adhesive hydrogel) were developed. This was accomplished by the incorporation of a betaine-based deep eutectic solvent (DES) containing curcumin (4.4 μg.cm-2) into the pullulan films, which tuned the films' skin moisture absorption ability, and therefore they switch into an adhesive hydrogel capable of delivering the photosensitizer. The obtained transparent films presented higher extensibility (elongation at break up to 338.2%) than the pullulan counterparts (6.08%), when stored at 54% of relative humidity, and the corresponding hydrogels a 4-fold higher adhesiveness than commercial hydrogels. These non-cytotoxic adhesives allowed the inactivation (∼5 log reduction), down to the detection limit of the method, of multiresistant strains of Staphylococcus aureus in ex vivo skin samples. Overall, these materials are promising for aPDT in the treatment of resistant skin infections, while being easily removed from the skin.

Development of a Stretchable and Water-Resistant Hydrogel with Antibacterial and Antioxidant Dual Functions for Wound Healing in Movable Parts

The treatment of wounds that develop on moving parts of the body, such as joints, is considered a challenge due to poor mechanical matching and secondary injury caused by continuous motion and inflammation. Herein, a stretchable, multifunctional hydrogel dressing utilizing the dual cross-linking of chitosan (CS) and acrylic acid (AA) and modified with caffeic acid (CA) and aloin (Alo) was developed. Mechanical testing demonstrated that the hydrogel possessed excellent stretching capability (of approximately 869%) combined with outstanding adhesion (about 56 kPa), contributing to its compatibility with moving parts and allowing complete coverage of wound sites without limiting joint and organ motion. Bioinformatics analysis confirmed that use of the hydrogel resulted in upregulated expression of multiple genes related to angiogenesis and cell proliferation. Furthermore, antibacterial testing indicated that the dressing suppressed the growth of Escherichia coli and methicillin-resistant Staphylococcus aureus (MRSA), providing a better microenvironment for wound healing. An in vivo wound defect model on movable skin verified that the wound healing observed with the hydrogel dressing was superior to that observed with a commercially available dressing. Taken together, the results suggest that a stretchable multifunctional hydrogel dressing represents a promising alternative wound dressing with therapeutic potential for superior healing, especially for moving parts of the body.

Laponite stabilized endogenous antibacterial hydrogel as wet-tissue adhesive

Clinical adhesives for suture-less wound closure remain the problem of poor biocompatibility, weak adhesive strength, and no endogenous antibacterial ability. Here, we designed a novel antibacterial hydrogel (CP-Lap hydrogel) consisting of chitosan and ε-polylysine after being modified with gallic acid (pyrogallol structure). The hydrogel was crosslinked by glutaraldehyde and Laponite via Schiff base and dynamic Laponite-pyrogallol interaction, free from heavy metal and oxidants. Given its dual crosslinking feature, the CP-Lap hydrogel exhibited adequate mechanical strength (150-240 kPa) and demonstrated swelling and degradation resistance. For a typical lap shear test with pigskin, the apparent adhesion strength of the CP-Lap hydrogel could be enhanced to ∼30 kPa benefiting from the O2 blocking effect provided by nanoconfinement space between Laponite. In addition, the hydrogel showed effective antibacterial properties and excellent biocompatibility. The results indicated that this hydrogel has great potential for wound-closing bioadhesives to avoid chronic infections and further harm.

Structure Property Relationship of Micellar Waterborne Poly(Urethane-Urea): Tunable Mechanical Properties and Controlled Release Profiles with Amphiphilic Triblock Copolymers

Waterborne polyurethane (WPU) has attracted significant interest as a promising alternative to solvent-based polyurethane (SPU) due to its positive impact on safety and sustainability. However, significant limitations of WPU, such as its weaker mechanical strength, limit its ability to replace SPU. Triblock amphiphilic diols are promising materials to enhance the performance of WPU due to their well-defined hydrophobic-hydrophilic structures. Yet, our understanding of the relationship between the hydrophobic-hydrophilic arrangements of triblock amphiphilic diols and the physical properties of WPU remains limited. In this study, we show that by controlling the micellar structure of WPU in aqueous solution via the introduction of triblock amphiphilic diols, the postcuring efficiency and the resulting mechanical strength of WPU can be significantly enhanced. Small-angle neutron scattering confirmed the microstructure and spatial distribution of hydrophilic and hydrophobic segments in the engineered WPU micelles. In addition, we show that the control of the WPU micellar structure through triblock amphiphilic diols renders WPU attractive in the applications of controlled release, such as drug delivery. Here, curcumin was used as a model hydrophobic drug, and the drug release behavior from WPU-micellar-based drug delivery systems was characterized. It was found that curcumin-loaded WPU drug delivery systems were highly biocompatible and exhibited antibacterial properties in vitro. Furthermore, the sustained release profile of the drug was found to be dependent on the structure of the triblock amphiphilic diols, suggesting the possibility of controlling the drug release profile via the selection of triblock amphiphilic diols. This work shows that by shedding light on the structure-property relationship of triblock amphiphilic diol-containing WPU micelles, we may enhance the applicability of WPU systems and move closer to realizing their promising potential in real-life applications.

Robust Underwater Adhesion of Catechol-Functionalized Polymer Triggered by Water Exchange

Adhesives with strong and stable underwater adhesion performance play a critical role in industrial and biomedical fields. However, achieving strong underwater adhesion, especially in flowing aqueous and blood environments, remains challenging. In this work, a novel solvent-exchange-triggered adhesive of catechol-functionalized polyethylenimine ethoxylated is presented. The authors show that the dimethyl sulfoxide (DMSO) solution of the catechol-functionalized polymer can be directly applied to various substrates and exhibits robust dry/underwater adhesion performance induced through in situ liquid-to-solid phase transition triggered by water-DMSO solvent exchange. The adhesive can even strongly bond low-surface-energy substrates (e.g., > 86 kPa for polytetrafluoroethylene) in diverse environments, including deionized water, air, phosphate-buffered saline solution, seawater, and aqueous conditions with different pH values. Moreover, the adhesive exhibits strong adhesion to biological tissues and can be used as a hemostatic sealant to prevent bleeding from arteries and severe trauma to the viscera. The adhesives developed in this study with strong dry/underwater adhesion performance and excellent hemostatic capabilities display enormous application prospects in the biomedical fields.

An Adhesive/Anti-Adhesive Janus Tissue Patch for Efficient Closure of Bleeding Tissue with Inhibited Postoperative Adhesion

Most of the current bioadhesives cannot perform well on bleeding tissues while postoperative adhesion is a general but serious clinical issue. Here, a three-layer biodegradable Janus tissue patch (J-TP) that is able to simultaneously enable efficient closure of bleeding wounds with significantly promoted clotting ability and suppressed postoperative adhesion of tissues is reported. A dry adhesive hydrogel bottom layer of the J-TP can form rapid (within 15 s) and strong (tensile strength up to 98 kPa) adhesion to bleeding/wet tissues with high bursting pressure (about 312.5 mmHg on a sealed porcine skin) through hydrogen binding and covalent conjugation between the carboxyl & N-hydroxy succinimide (NHS) groups of hydrogel and the primary amine groups of tissues, while the phosphonic motifs can significantly reduce blood loss (by 81% on a rat bleeding liver model) of bleeding wounds. A thin polylactic acid (PLA) middle layer can improve the tensile strength (by 132%) of the J-TP in wet conditions while the grafted zwitterionic polymers can effectively prevent postoperative tissue adhesion and inflammatory reaction. This J-TP may be a promising tissue patch to assist the clinical treatment of injured bleeding tissues with inhibited postoperative adhesion.

Protein-Based Biological Materials: Molecular Design and Artificial Production

Polymeric materials produced from fossil fuels have been intimately linked to the development of industrial activities in the 20th century and, consequently, to the transformation of our way of living. While this has brought many benefits, the fabrication and disposal of these materials is bringing enormous sustainable challenges. Thus, materials that are produced in a more sustainable fashion and whose degradation products are harmless to the environment are urgently needed. Natural biopolymers─which can compete with and sometimes surpass the performance of synthetic polymers─provide a great source of inspiration. They are made of natural chemicals, under benign environmental conditions, and their degradation products are harmless. Before these materials can be synthetically replicated, it is essential to elucidate their chemical design and biofabrication. For protein-based materials, this means obtaining the complete sequences of the proteinaceous building blocks, a task that historically took decades of research. Thus, we start this review with a historical perspective on early efforts to obtain the primary sequences of load-bearing proteins, followed by the latest developments in sequencing and proteomic technologies that have greatly accelerated sequencing of extracellular proteins. Next, four main classes of protein materials are presented, namely fibrous materials, bioelastomers exhibiting high reversible deformability, hard bulk materials, and biological adhesives. In each class, we focus on the design at the primary and secondary structure levels and discuss their interplays with the mechanical response. We finally discuss earlier and the latest research to artificially produce protein-based materials using biotechnology and synthetic biology, including current developments by start-up companies to scale-up the production of proteinaceous materials in an economically viable manner.

Classification and functional characterization of spidroin genes in a wandering spider, Pardosa pseudoannulata

Spiders impress us with their sophisticated use of silk and the stunningly distinct silk proteins (spidroins) in each spider species. Understanding how silks and spidroins function and evolve within the spider world is one profound interest to expand our knowledge on spider evolution. Spidroins are characterized with the divergent repeat core region flanked with the relatively conserved N- and C-terminus. The structure and number of the repeats contribute to the unique mechanical properties of the spidroin and the silk. Spidroins have been intensively studied in web-weaver spiders, but information regarding their diversity in wandering spiders remains scarce. Here, twenty spidroin genes were identified in the pond wolf spider, Pardosa pseudoannulata, belonging to the retrolateral tibial apophysis (RTA) clade. These spidroins were categorized into four classes, including twelve ampullate spidroin (AmpSp), four aciniform spidroin (AcSp), one tubuliform spidroin (TuSp), one pyriform spidroin (PiSp), and two spidroin-like proteins. Multiple copies of the AmpSp and AcSp genes were tandemly arranged in a cluster within the genome, and the N-terminal domains and repetitive sequences of the proximately located spidroins were highly similar, suggesting that the spidroin genes diversified via tandem duplication. Only four types of morphologically distinct silk glands were found in P. pseudoannulata, namely Ma, Mi, Ac, and Pi glands, consistent with the glandular affiliation hypothesis that spidroins co-evolved with glandular specialization to fit species-specific needs. Expression profiling revealed that the single tubuliform spidroin (TuSp) gene was highly expressed in gravid females and two AcSp genes displayed synchronous expression. Knock-down of the TuSp gene via RNAi resulted in fragile and cracked eggsacs and prolonged the female pre-oviposition period, validating its importance in spider reproduction. The genome-scale characterization and functional study of spidroin genes allows associating the presence of specific spidroins with silk utility in P. pseudoannulata and will expand our knowledge of spider evolution.

Natural Dual-Crosslinking Bioadhesive Hydrogel for Corneal Regeneration in Large-Size Defects

Corneal injectable hydrogels represent a promising alternative to alleviate donor shortage and simplify traditional surgeries. However, most hydrogels focus on repairing focal corneal defects (≤3.5 mm) and leave many clinical requirements unmet. Herein, a novel ion-activated bioadhesive hydrogel (IonBAH) is designed and its long-term performance of repairing large corneal defects (6 mm) is evaluated in rabbits for 6 months. The IonBAH is a dual-network hydrogel composed of natural corneal extracellular matrix and peptide-modified alginate, which enables its desirable transparency and biocompatibility, tunable mechanics, and robust adhesion. Moreover, the IonBAH maintains the secretory phenotype of quiescent keratocytes, while preventing their myofibroblastic differentiation in vitro. Upon application in situ, it rapidly seals the 6 mm corneal defect and forms normal curvature through the coverage of a contact lens impregnated with calcium ions. During the 6 months follow-up, the IonBAH promotes rapid regeneration of corneal epithelium, stroma, and nerves with restored transparency, equivalent to the outcome of donor corneal transplantation. In addition, the suitability of IonBAH as an adhesive and patch for various clinical requirements are also evaluated with a pleasing outcome. Collectively, IonBAH may provide a clinically applicable scaffold for corneal surgeries, especially in large defect repair.

Kinetics of the interfacial curing reaction for an epoxy-amine mixture

A better understanding of the chemical reaction between epoxy and amine compounds at a solid interface is crucial for the design and fabrication of materials with appropriate adhesive strength. Here, we examined the curing reaction kinetics of epoxy phenol novolac and 4,4'-diaminodiphenyl sulfone at the outermost interface using sum-frequency generation spectroscopy, and X-ray and neutron reflectivity in conjunction with a full atomistic molecular dynamics simulation. The reaction rate constant was much larger at the quartz interface than in the bulk. While the apparent activation energy at the quartz interface obtained from an Arrhenius plot was almost identical to the bulk value, the frequency factor at the quartz interface was greater than that in the bulk. These results could be explained in terms of the densification and orientation of reactants at the interface, facilitating the encounter of the reactants present.

Rapid Ultratough Topological Tissue Adhesives

Tissue adhesives capable of achieving strong and tough adhesion in permeable wet environments are useful in many biomedical applications. However, adhesion generated through covalent bond formation directly with the functional groups of tissues (i.e., COOH and NH2  groups in collagen), or using non-covalent interactions can both be limited by weak, unstable, or slow adhesion. Here, it is shown that by combining pH-responsive bridging chitosan polymer chains and a tough hydrogel dissipative matrix one can achieve unprecedented ultratough adhesion to tissues (>2000 J m-2 ) in 5-10 min without covalent bond formation. The strong non-covalent adhesion is shown to be stable under physiologically relevant conditions and strongly influenced by chitosan molecular weight, molecular weight of polymers in the matrix, and pH. The adhesion mechanism relies primarily on the topological entanglement between the chitosan chains and the permeable adherends. To further expand the applicability of the adhesives, adhesion time can be decreased by dehydrating the hydrogel matrix to facilitate rapid chitosan interpenetration and entanglement (>1000 J m-2  in ≤1 min). The unprecedented adhesive properties presented in this study open opportunities for new strategies in the development of non-covalent tissue adhesives and numerous bioapplications.

Adhesive contact and protein elastic modulus tune orb weaving spider glue droplet biomechanics to habitat humidity

Tiny glue droplets along the viscous capture threads of spider orb webs prevent insects from escaping. Each droplet is formed of a protein core surrounded by a hygroscopic aqueous layer, which cause the droplet's adhesion to change with humidity. As an insect struggles to escape the web, a thread's viscoelastic core proteins extend, transferring adhesive forces to the thread's support fibers. Maximum adhesive force is achieved when absorbed atmospheric moisture allows a flattened droplet to establish sufficient adhesive contact while maintaining the core protein cohesion necessary for force transfer. We examined the relationship between these droplet properties and adhesive force and the work of extending droplets at five relative humidities in twelve species that occupy habitats which have different humidities. A regression analysis that included both flattened droplet area and core protein elastic modulus described droplet adhesion, but the model was degraded when core protein area was substituted for droplet. Species from low humidity habitats expressed greater adhesion at lower humidities, whereas species from high humidity habitats expressed greater adhesion at high humidities. Our results suggest a general model of droplet adhesion with two adhesion peaks, one for low humidity species, which occurs when increasing droplet area and decreasing protein cohesion intersect, and another for high humidity species, which occurs when area and cohesion have diverged maximally. These dual peaks in adhesive force explain why some species from intermediate and high humidity habitats express high adhesion at several humidities. STATEMENT OF SIGNIFICANCE: We characterized the effect of humidity on the adhesion of twelve orb weaving spider species' glue droplets and showed how humidity-mediated changes in the contact area of a droplet's outer, hygroscopic aqueous layer and the stiffness of its protein core affect droplet performance. This revealed how droplet adhesion has been tuned to the humidity of a species' habitat and allowed us to revise a model that describes the environmental determinants of droplet biomechanics.

Robust Hydrogel Adhesion by Harnessing Bioinspired Interfacial Mineralization

Hydrogels have gained intensive interest in biomedical and flexible electronics, and adhesion of hydrogels to substrates or devices is indispensable in these application scenarios. Although numerous hydrogel adhesion strategies have been developed, it is still challenging to achieve a hydrogel with robust adhesion interface through a universal yet simple method. Here, a strategy for establishing strong interfacial adhesion between various hydrogels and a wide variety of substrates (i.e., soft hydrogels and rigid solids, including glass, aluminum, PET, nylon and PDMS) even under wet conditions, is reported. This strong interfacial adhesion is realized by constructing a bioinspired mineralized transition layer through ion diffusion and subsequent mineral deposition. This strategy is not only generally applicable to a broad range of substrates and ionic pairs, but also compatible with various fabrication approaches without compromising their interfacial robustnesses. This strategy is further demonstrated in the application of single-electrode triboelectric nanogenerators (TENG), where a robust interface between the hydrogel and elastomer layers is enabled to ensure a reliable signal generation and output.

Molecular Changes in Spider Viscid Glue As a Function of Relative Humidity Revealed Using Infrared Spectroscopy

Spider aggregate glue can absorb moisture from the atmosphere to reduce its viscosity and become tacky. The viscosity at which glue adhesion is maximized is remarkably similar across spider species, even though that viscosity is achieved at very different relative humidity (RH) values matching their diverse habitats. However, the molecular changes in the protein structure and the bonding state of water (both referred to here as molecular structure) with respect to the changes in RH are not known. We use attenuated total reflectance-infrared (ATR-IR) spectroscopy to probe the changes in the molecular structure of glue as a function of RH for three spider species from different habitats. We find that the glue retains bound water at lower RH and absorbs liquid-like water at higher RH. The absorption of liquid-like water at high RH plasticizes the glue and explains the decrease in glue viscosity. The changes to protein conformations as a function RH are either subtle or not detectable by IR spectroscopy. Importantly, the molecular changes are reversible over multiple cycles of RH change. Further, separation of glue constituents results in a different humidity response as compared to pristine glue, supporting the standing hypothesis that the glue constituents have a synergistic association that makes spider glue a functional adhesive. The results presented in this study provide further insights into the mechanism of the humidity-responsive adhesion of spider glue.

Correlated evolution between orb weaver glue droplets and supporting fibres maintains their distinct biomechanical roles in adhesion

Orb weaving spiders employ a 'silken toolkit' to accomplish a range of tasks, including retaining prey that strike their webs. This is accomplished by a viscous capture spiral thread that features tiny glue droplets, supported by a pair of elastic flagelliform fibres. Each droplet contains a glycoprotein core responsible for adhesion. However, prey retention relies on the integrated performance of multiple glue droplets and their supporting fibres, with previous studies demonstrating that a suspension bridge forms, whose biomechanics sum the adhesive forces of multiple droplets while dissipating the energy of the struggling insect. While the interdependence of the droplet's glycoprotein and flagelliform fibres for functional adhesion is acknowledged, there has been no direct test of this hypothesized linkage between the material properties of each component. Spider mass, which differs greatly across orb weaving species, also has the potential to affect flagelliform fibre and glycoprotein material properties. Previous studies have linked spider mass to capture thread performance but have not examined the relationship between spider mass and thread material properties. We extend earlier studies to examine these relationships in 16 orb weaving species using phylogenetic generalized least squares. This analysis revealed that glycoprotein stiffness (elastic modulus) was correlated with flagelliform fibre stiffness, and that spider mass was related to the glycoprotein volume, flagelliform fibre cross-sectional area and droplets per unit thread length. By shaping the elastic moduli of glycoprotein adhesive and flagelliform fibres, natural selection has maintained the biomechanical integration of this adhesive system.

Sweat-Resistant Silk Fibroin-Based Double Network Hydrogel Adhesives

The adhesion between flexible epidermal sensors and human skin is essential for maintaining the stable functionality of the sensors. However, it is still challenging for epidermal electronic devices to achieve durable adhesion to the surface of the skin, especially under sweaty or humid conditions. Here, we report a silk fibroin-polyacrylamide (SF-PAAm) double network (DN) hydrogel adhesive with excellent biocompatibility, strong and durable adhesion on wet surfaces, and tunable adhesive properties. The hydrophilic PAAm network greatly improves the water retention capability of the DN hydrogel and reduces the β-sheet crystalline content of SF, leading to excellent adhesive properties of the hydrogel across a wide range of humidity. The SF-PAAm DN hydrogel adhesive can be readily integrated with different epidermal sensor arrays and performs very well in real-time on-body sweat sensing. The SF-PAAm DN hydrogels have great potential for application in various epidermal healthcare sensors as well as medical adhesives for other medical applications.

Processes of molecular adsorption and ordering enhanced by mechanical stimuli under high contact pressure

Adsorbed molecular films, referred to as boundary films in tribology, are widely used in various industrial products as a keyway for surface functionalisation, such as lubricity, wettability, and adhesion. Because boundary films are thin nanometre-scale molecular layers and can easily be removed, their formation process cannot be elucidated in detail. In this study, to analyse the growth dynamics of boundary films, the film thickness and molecular orientation of the boundary film of a fatty acid used as an additive in rolling contact as mechanical stimuli were measured in situ. The measurements were performed on simple test lubricants, which were composed of n-hexadecane and stearic acid, at rolling tribological condition between steel and glass (or sapphire) surfaces by ultrathin film interferometry combined with sum-frequency generation spectroscopy according to a unique protocol. The results quantitatively demonstrate shear-induced boundary film formation. The insight gained from these results is anticipated to enable the formulation of high-performance lubricant additives to further reduce friction loss and high-performance glues that can be freely designed for removability.

Connecting materials, performance and evolution: a case study of the glue of moth-catching spiders (Cyrtarachninae)

Morphological structures and extended phenotypes are made possible by materials that are encoded by the genome. Nearly all biomaterials are viscoelastic, which means that to understand performance, one must understand the strain rate-dependent properties of these materials in relevant ecological interactions, as the behavior of a material can vary dramatically and rapidly. Spider silks are an example of materials whose properties vary substantially intra- and inter-specifically. Here, we focus on aggregate silk, which functions as a biological adhesive. As a case study to understand how a material manifests from genome through organism to ecology, we highlight moth-specialist spiders, the Cyrtarachninae, and their glues as an ideal experimental system to investigate the relationship between genomics and ecologically variable performance of a biological material. There is a clear eco-evolutionary innovation that Cyrtarachne akirai and related species have evolved, a unique trait not found in other spiders, a glue which overcomes the scales of moths. By examining traditional orb-weavers, C. akirai and other subfamily members using biomechanical testing and genomic analysis, we argue that we can track the evolution of this novel bioadhesive and comment on the selection pressures influencing prey specialization. The importance of the ecological context of materials testing is exemplified by the poor performance of C. akirai glue on glass and the exceptional spreading ability and adhesive strength on moths. The genetic basis for these performance properties is experimentally tractable because spider silk genes are minimally pleiotropic and advances in genomic technologies now make possible the discovery of complete silk gene sequences.

Emerging Biopolymer-Based Bioadhesives

Bioadhesives have been widely used in healthcare and biomedical applications due to their ease-of-operation for wound closure and repair compared to conventional suturing and stapling. However, several challenges remain for developing ideal bioadhesives, such as unsatisfied mechanical properties, non-tunable biodegradability, and limited biological functions. Considering these concerns, naturally derived biopolymers have been considered good candidates for making bioadhesives owing to their ready availability, facile modification, tunable mechanical properties, and desired biocompatibility and biodegradability. Over the past several years, remarkable progress has been made on biopolymer-based adhesives, covering topics from novel materials designs and advanced processing to clinical translation. The developed bioadhesives have been applied for diverse applications, including tissue adhesion, hemostasis, antimicrobial, wound repair/tissue regeneration, and skin-interfaced bioelectronics. Here in this comprehensive review, recent progress on biopolymer-based bioadhesives is summarized with focuses on clinical translations and multifunctional bioadhesives. Furthermore, challenges and opportunities such as weak adhesion strength at the hydrated state, mechanical mismatch with tissues, and unfavorable immune responses are discussed with an aim to facilitate the future development of high-performance biopolymer-based bioadhesives.

Sum frequency generation spectroscopy of the attachment disc of a spider

The pyriform silk of the attachment disc of a spider was studied using infrared-visible vibrational sum frequency generation (SFG) spectroscopy. The spider can attach dragline and radial lines to many kinds of substrates in nature (concrete, alloy, metal, glass, plant branches, leaves, etc.) with the attachment disc. The adhesion can bear the spider's own weight, and resist the wind on its orb web. From our SFG spectroscopy study, the NH group of arginine side chain and/or NH₂ group of arginine and glutamine side chain in the amino acid sequence of the attachment silk proteins are suggested to be oriented in the disc. It was inferred from the observed doublet SFG peaks at around 3300 cm^-1 that the oriented peptide contains two kinds of structures.

Atmospheric Hygroscopic Ionogels with Dynamically Stable Cooling Interfaces Enable a Durable Thermoelectric Performance Enhancement

In thermoelectric generator (TEG) systems, heat dissipation from their cold sides is an accessible, low-cost, and effective way to increase the temperature gap for their thermoelectric performance enhancement. Although significant efforts have been dedicated mediated by hygroscopic hydrogel coolers as self-sustained alternatives for effective heat removal, it still remains a challenge for overcoming instabilities in their cooling process. The inevitable mechanical deformation of these conventional hydrogels induced by excessive water desorption may cause a detached cooling interface with the targeted substrates, leading to undesirable cooling failure. Herein, a self-sustained and durable evaporative cooling approach for TEG enabled by atmospheric hygroscopic ionogels (RIGs) with stable interfaces to efficiently improve its thermoelectric performance is proposed. Owing to its superior hygroscopicity, the RIGs can achieve higher heat dissipation for TEG through water evaporation than that of common commercial metal heat sinks. Moreover, its favorable adhesion enables the RIG closely interact with the TEG surface either in static or dynamic conditions for a durable thermoelectric performance enhancement. It is believed that such a self-sustained evaporative cooling strategy based on the RIG will have great implications for the enhancement of TEG's efficiency, demonstrating a great promise in intermittent thermal-energy utilizations.

(Un)expected Similarity of the Temporary Adhesive Systems of Marine, Brackish, and Freshwater Flatworms

Many free-living flatworms have evolved a temporary adhesion system, which allows them to quickly attach to and release from diverse substrates. In the marine Macrostomum lignano, the morphology of the adhesive system and the adhesion-related proteins have been characterised. However, little is known about how temporary adhesion is performed in other aquatic environments. Here, we performed a 3D reconstruction of the M. lignano adhesive organ and compared it to the morphology of five selected Macrostomum, representing two marine, one brackish, and two freshwater species. We compared the protein domains of the two adhesive proteins, as well as an anchor cell-specific intermediate filament. We analysed the gene expression of these proteins by in situ hybridisation and performed functional knockdowns with RNA interference. Remarkably, there are almost no differences in terms of morphology, protein regions, and gene expression based on marine, brackish, and freshwater habitats. This implies that glue components produced by macrostomids are conserved among species, and this set of two-component glue functions from low to high salinity. These findings could contribute to the development of novel reversible biomimetic glues that work in all wet environments and could have applications in drug delivery systems, tissue adhesives, or wound dressings.

Design principles for creating synthetic underwater adhesives

Water and adhesives have a conflicting relationship as demonstrated by the failure of most man-made adhesives in underwater environments. However, living creatures routinely adhere to substrates underwater. For example, sandcastle worms create protective reefs underwater by secreting a cocktail of protein glue that binds mineral particles together, and mussels attach themselves to rocks near tide-swept sea shores using byssal threads formed from their extracellular secretions. Over the past few decades, the physicochemical examination of biological underwater adhesives has begun to decipher the mysteries behind underwater adhesion. These naturally occurring adhesives have inspired the creation of several synthetic materials that can stick underwater - a task that was once thought to be "impossible". This review provides a comprehensive overview of the progress in the science of underwater adhesion over the past few decades. In this review, we introduce the basic thermodynamics processes and kinetic parameters involved in adhesion. Second, we describe the challenges brought by water when adhering underwater. Third, we explore the adhesive mechanisms showcased by mussels and sandcastle worms to overcome the challenges brought by water. We then present a detailed review of synthetic underwater adhesives that have been reported to date. Finally, we discuss some potential applications of underwater adhesives and the current challenges in the field by using a tandem analysis of the reported chemical structures and their adhesive strength. This review is aimed to inspire and facilitate the design of novel synthetic underwater adhesives, that will, in turn expand our understanding of the physical and chemical parameters that influence underwater adhesion.

Attractive forces slow contact formation between deformable bodies underwater

Thermodynamics tells us to expect underwater contact between two hydrophobic surfaces to result in stronger adhesion compared to two hydrophilic surfaces. However, the presence of water changes not only energetics but also the dynamic process of reaching a final state, which couples solid deformation and liquid evacuation. These dynamics can create challenges for achieving strong underwater adhesion/friction, which affects diverse fields including soft robotics, biolocomotion, and tire traction. Closer investigation, requiring sufficiently precise resolution of film evacuation while simultaneously controlling surface wettability, has been lacking. We perform high-resolution in situ frustrated total internal reflection imaging to track underwater contact evolution between soft-elastic hemispheres of varying stiffness and smooth-hard surfaces of varying wettability. Surprisingly, we find the exponential rate of water evacuation from hydrophobic-hydrophobic (adhesive) contact is three orders of magnitude lower than that from hydrophobic-hydrophilic (nonadhesive) contact. The trend of decreasing rate with decreasing wettability of glass sharply changes about a point where thermodynamic adhesion crosses zero, suggesting a transition in mode of evacuation, which is illuminated by three-dimensional spatiotemporal height maps. Adhesive contact is characterized by the early localization of sealed puddles, whereas nonadhesive contact remains smooth, with film-wise evacuation from one central puddle. Measurements with a human thumb and alternatively hydrophobic/hydrophilic glass surface demonstrate practical consequences of the same dynamics: adhesive interactions cause instability in valleys and lead to a state of more trapped water and less intimate solid-solid contact. These findings offer interpretation of patterned texture seen in underwater biolocomotive adaptations as well as insight toward technological implementation.

Biomimicking spider webs for effective fog water harvesting with electrospun polymer fibers

Fog is an underestimated source of water, especially in regions where conventional methods of water harvesting are impossible, ineffective, or challenging for low-cost water resources. Interestingly, many novel methods and developments for effective water harvesting are inspired by nature. Therefore, in this review, we focused on one of the most researched and developing forms of electrospun polymer fibers, which successfully imitate many fascinating natural materials for instance spider webs. We showed how fiber morphology and wetting properties can increase the fog collection rate, and also observed the influence of fog water collection parameters on testing their efficiency. This review summarizes the current state of the art on water collection by fibrous meshes and offers suggestions for the testing of new designs under laboratory conditions by classifying the parameters already reported in experimental set-ups. This is extremely important, as fog collection under laboratory conditions is the first step toward creating a new water harvesting technology. This review summarizes all the approaches taken so far to develop the most effective water collection systems based on electrospun polymer fibers.

Pseudo-zwitterions self-assembled from polycation and anion clusters showing exceptional water-cleanable anti-crude-oil-adhesion property

It is of great importance and practical value to develop a facile and operable surface treatment method of materials with excellent antipollution and antiadhesion property, but still a huge challenge. In this work, a series of pseudo-zwitterions are prepared from electrostatic assembly of cationic polyethyleneimine and anionic phosphonic clusters. These pseudo-zwitterionic assemblies provide a strong hydration through electrostatic interaction with water and in turn create a barrier against oil foulants, leading to a nearly zero crude oil adhesion force. The pseudo-zwitterions-decorated surfaces exhibit exceptional water-cleanable oil-repellent property, even when they are completely dried and without prehydration before fouled by crude oil. While using these pseudo-zwitterions-modified polymeric membranes for separating surfactant stabilized oil-in-water emulsion, less than 10% decline of permeating flux is observed throughout a 2-h continuous separation experiment, showing excellent emulsion separation ability and antipollution performance for high viscous oil.

•

The ion pairs called pseudo-zwitterions were constructed by electrostatic self-assembly

•

The pseudo-zwitterions-modified surfaces can repel crude oil without prehydration

•

Pseudo-zwitterionic membrane shows exceptional antioil fouling performance

•

The strategy gives a new way to endow the surfaces with excellent antiadhesion property

Renatured hydrogel painting

Hydrogel coatings pave an avenue for improving the lubricity, biocompatibility, and flexibility of solid surfaces. From the viewpoint of practical applications, this work establishes a scalable method to firmly adhere hydrogel layers to diverse solid surfaces. The strategy, termed as renatured hydrogel painting (RHP), refers to adhering dehydrated xerogel to a surface with appropriate glues, followed by the formation of a hydrogel layer after rehydration of the xerogel. With the benefits of simplicity and generality, this strategy can be readily applied to different hydrogel systems, no matter what the substrate is. Hydrogel adhesion is demonstrated by its tolerance against mechanical impact with hydrodynamic shearing at 14 m/s. This method affords powerful supplements to renew the surface chemistry and physical properties of solid substrates. In addition, we show that the RHP technique can be applied to living tissue, with potential for clinical applications such as the protection of bone tissue.

Repeat variation resolves a complete aggregate silk sequence of bolas spider Mastophora phrynosoma

Many species of spider use a modified silk adhesive, called aggregate glue, to aid in prey capture. Aggregate spidroins (spider fibroins) are modified members of the spider silk family, however they are not spun into fibers as are their solid silk relatives. The genes that encode for aggregate spidroins are the largest of the known spidroin genes and are similarly highly repetitive. In this study, we used long read sequencing to discover the aggregate spidroin genes of the toad-like bolas spider, Mastophora phrynosoma, which employs the glue in a unique way, using only a single, large droplet to capture moths. While Aggregate Spidroin 1 (AgSp1) remains incomplete, AgSp2 is more than an extraordinary 62 kilobases of coding sequence, 20 kb longer than the longest spidroin on record. The structure of repeats from both aggregate silk proteins follows a similar pattern seen in other species, with the same strict conservation of amino acid residue number for much of the repeats' lengths. Interestingly, AgSp2 lacks the elevated number and groupings of glutamine residues seen in the other reported AgSp2 of a classic orb weaving species. The role of gene length in glue functionality remains a mystery, and thus discovering length differences across species will allow understanding and harnessing of this attribute for the next generation of bio-inspired adhesives.

Direct evidence of acid-base interactions in gecko adhesion

While it is generally accepted that van der Waals (vdW) forces govern gecko adhesion, several studies indicate contributions from non-vdW forces and highlight the importance of understanding the adhesive contact interface. Previous work hypothesized that the surface of gecko setae is hydrophobic, with nonpolar lipid tails exposed on the surface. However, direct experimental evidence supporting this hypothesis and its implications on the adhesion mechanism is lacking. Here, we investigate the sapphire-setae contact interface using interface-sensitive spectroscopy and provide direct evidence of the involvement of acid-base interactions between polar lipid headgroups exposed on the setal surface and sapphire. During detachment, a layer of unbound lipids is left as a footprint due to cohesive failure within the lipid layer, which, in turn, reduces wear to setae during high stress sliding. The absence of this lipid layer enhances adhesion, despite a small setal-substrate contact area. Our results show that gecko adhesion is not exclusively a vdW-based, residue-free system.

Robust performance of spider viscid silk on hairy and smooth insect substrates

Spider viscid silk adheres to insects in orb webs and is a "smart-adhesive" that quickly changes droplet size, viscosity, and adhesiveness in response to atmospheric humidity. Different species of spiders "tune" water uptake to match the humidity of their foraging environments, achieving a similar "universal" viscosity that optimizes tradeoffs in spreading versus cohesive bulk energy needed to enhance adhesion. Too much water lowers viscosity so that the glue spreads well, but cohesive failure occurs easily, generating poor adhesion. However, the optimal viscosity model of adhesion is based on experiments using smooth glass. Here we test the hypothesis that a less viscous, "over-lubricated" glue, which shows poor adhesion on smooth glass, will be stickier on hairy insects because of its greater ability to spread across three-dimensional rough surfaces. We ran adhesion tests of the furrow spider (Larinioides cornutus (Clerck, 1757)) viscid silk on honey bee (Apis mellifera) thorax, with and without hairs, in either high or medium humidity. Our results show that "over-lubricated" glue increases adhesion on hairy surfaces, performing equally as well as an optimally viscous glue.

A Spider-Silk-Inspired Wet Adhesive with Supercold Tolerance

Conventional adhesives often encounter interfacial failure in humid conditions due to small droplets of water condensed on surface, but spider silks can capture prey in such environment. Here a robust spider-silk-inspired wet adhesive (SA) composed of core-sheath nanostructured fibers with hygroscopic adhesive nanosheath (poly(vinylpyrrolidone)) and supporting nanocore (polyurethane) is reported. The wet adhesion of the SA is achieved by a unique dissolving-wetting-adhering process of core-sheath nanostructured fibers, revealed by in situ observations at macro- and microscales. Further, the SA maintains reliable adhesion on wet and cold substrates from 4 to -196 °C and even tolerates splashing, violent shaking, and weight loading in liquid nitrogen (-196 °C), showing promising applicability in cryogenic environments. This study will provide an innovative route to design functional wet adhesives.

Shifts in morphology, gene expression, and selection underlie web loss in Hawaiian Tetragnatha spiders

BACKGROUND

A striking aspect of evolution is that it often converges on similar trajectories. Evolutionary convergence can occur in deep time or over short time scales, and is associated with the imposition of similar selective pressures. Repeated convergent events provide a framework to infer the genetic basis of adaptive traits. The current study examines the genetic basis of secondary web loss within web-building spiders (Araneoidea). Specifically, we use a lineage of spiders in the genus Tetragnatha (Tetragnathidae) that has diverged into two clades associated with the relatively recent (5 mya) colonization of, and subsequent adaptive radiation within, the Hawaiian Islands. One clade has adopted a cursorial lifestyle, and the other has retained the ancestral behavior of capturing prey with sticky orb webs. We explore how these behavioral phenotypes are reflected in the morphology of the spinning apparatus and internal silk glands, and the expression of silk genes. Several sister families to the Tetragnathidae have undergone similar web loss, so we also ask whether convergent patterns of selection can be detected in these lineages.

RESULTS

The cursorial clade has lost spigots associated with the sticky spiral of the orb web. This appears to have been accompanied by loss of silk glands themselves. We generated phylogenies of silk proteins (spidroins), which showed that the transcriptomes of cursorial Tetragnatha contain all major spidroins except for flagelliform. We also found an uncharacterized spidroin that has higher expression in cursorial species. We found evidence for convergent selection acting on this spidroin, as well as genes involved in protein metabolism, in the cursorial Tetragnatha and divergent cursorial lineages in the families Malkaridae and Mimetidae.

CONCLUSIONS

Our results provide strong evidence that independent web loss events and the associated adoption of a cursorial lifestyle are based on similar genetic mechanisms. Many genes we identified as having evolved convergently are associated with protein synthesis, degradation, and processing, which are processes that play important roles in silk production. This study demonstrates, in the case of independent evolution of web loss, that similar selective pressures act on many of the same genes to produce the same phenotypes and behaviors.

Bio-Based Hotmelt Adhesives with Well-Adhesion in Water

We suggest a simple idea of bio-based adhesives with strong adhesion even under water. The adhesives simply prepared via polycondensation of 3,4-dihydroxyhydrocinnamic acid (DHHCA) and lactic acid (LA) in one pot polymerization. Poly(DHHCA-co-LA) has a hyperbranched structure and demonstrated strong dry and wet adhesion strength on diverse material surfaces. We found that their adhesion strength depended on the concentration of DHHCA. Poly(DHHCA-co-LA) with the lowest concentration of DHHCA showed the highest adhesion strength in water with a value of 2.7 MPa between glasses, while with the highest concentration of DHHCA it exhibited the highest dry adhesion strength with a value of 3.5 MPa, which was comparable to commercial instant super glue. Compared to underwater glues reported previously, our adhesives were able to spread rapidly under water with a low viscosity and worked strongly. Poly(DHHCA-co-LA) also showed long-term stability and kept wet adhesion strength of 2.2 MPa after steeping in water for 1 month at room temperature (initial strength was 2.4 MPa). In this paper, Poly(DHHCA-co-LA) with strong dry and wet adhesion properties and long-term stability was demonstrated for various kinds of applications, especially for wet conditions.

High-Strength Hydrogel Attachment through Nanofibrous Reinforcement

The repair of a cartilage lesion with a hydrogel requires a method for long-term fixation of the hydrogel in the defect site. Attachment of a hydrogel to a base that allows for integration with bone can enable long-term fixation of the hydrogel, but current methods of forming bonds to hydrogels have less than a tenth of the shear strength of the osteochondral junction. This communication describes a new method, nanofiber-enhanced sticking (NEST), for bonding a hydrogel to a base with an adhesive shear strength three times larger than the state-of-the-art. An example of NEST is described in which a nanofibrous bacterial cellulose sheet is bonded to a porous base with a hydroxyapatite-forming cement followed by infiltration of the nanofibrous sheet with hydrogel-forming polymeric materials. This approach creates a mineralized nanofiber bond that mimics the structure of the osteochondral junction, in which collagen nanofibers extend from cartilage into a mineralized region that anchors cartilage to bone.

Polymeric Tissue Adhesives

Polymeric tissue adhesives provide versatile materials for wound management and are widely used in a variety of medical settings ranging from minor to life-threatening tissue injuries. Compared to the traditional methods of wound closure (i.e., suturing and stapling), they are relatively easy to use, enable rapid application, and introduce minimal tissue damage. Furthermore, they can act as hemostats to control bleeding and provide a tissue-healing environment at the wound site. Despite their numerous current applications, tissue adhesives still face several limitations and unresolved challenges (e.g., weak adhesion strength and poor mechanical properties) that limit their use, leaving ample room for future improvements. Successful development of next-generation adhesives will likely require a holistic understanding of the chemical and physical properties of the tissue-adhesive interface, fundamental mechanisms of tissue adhesion, and requirements for specific clinical applications. In this review, we discuss a set of rational guidelines for design of adhesives, recent progress in the field along with examples of commercially available adhesives and those under development, tissue-specific considerations, and finally potential functions for future adhesives. Advances in tissue adhesives will open new avenues for wound care and potentially provide potent therapeutics for various medical applications.