Tailoring vertical phase distribution of quasi-two-dimensional perovskite films via surface modification of hole-transporting layer

Highly Efficient and Stable Wide Band Gap Quasi-2D Perovskite Solar Cells via Interfacial Quantum Well Regulation

Quasi-2D perovskites are known for their long-term environmental stability. In this system, bulky spacers are expected to inhibit ion migration and reduce interfacial nonradiative recombination. However, it also presents challenges for charge transportation at the same time. As a result, the possibility and great potential of such quasi-2D perovskites for wide band gap (WBG) solar cells have rarely been explored. Here, we specialize in formamidinium-based quasi-2D WBG perovskites, obtaining a preferential crystal orientation perovskite film. To obtain better performance, the interfacial quantum wells (QWs) regulation strategy for a higher preference of a low-dimensional perovskite interface layer is proposed. The interfacial QWs are adjusted by the preference binding capacity of the solvent and long-chain molecules. The importance of interfacial QW distribution for charge transportation and stability is further investigated in this work. The quasi-2D 1.70 eV perovskite solar cells achieved by the regulation strategy exhibit an efficiency of 20.18% with a VOC of 1.27 V and maintain 95% initial performance under 1 sun illumination over 500 h of stable operation.

MAPbX3 Perovskite Single Crystals for Advanced Optoelectronic Applications: Progress, Challenges, and Perspective

Perovskite single crystals have garnered significant attention due to their impressive properties in optoelectronic applications, including long carrier diffusion lengths, low trap-state densities, and enhanced stability. Methylamino lead halide perovskite (MAPbX3, where X is a halogen such as Cl, Br, or I) is a notable example of a metal halide perovskite with desirable properties and ideal cubic perovskites with a tolerance factor between 0.9 and 1.0. MAPbX3 has adjustable bandgap, high thermal and chemical stability, and excellent light absorption capacity. Here the unique characteristics of MAPbX3, including molecular structure, optical absorption properties, and carrier transport of MAPbX3 single crystals are summarized. Universal growth technologies for MAPbX3 single crystals, including inverse temperature crystallization, anti-solvent evaporation crystallization, solvent evaporation method, and single-crystalline thin film, including epitaxial method and space limiting method, are briefly introduced. Additionally, a comprehensive review of MAPbX3 single crystals in various optoelectronic device applications, including photodetectors, X-ray detectors, light-emitting diodes, lasers, and solar cells is mainly discussed. Finally, the current challenges and future prospects of the large-scale preparation and growth of MAPbX3 single crystals are put forward. With the continuous progress of photoelectric technology, more innovative photoelectric applications in the future are expected to bring more convenience and progress.

An anticoagulant supercapacitor for implantable applications

With the rapid advancement of implantable electronic medical devices, implantable supercapacitors have emerged as popular energy storage devices. However, supercapacitors inevitably come into direct contact with blood when implanted, potentially causing adverse clinical reactions such as coagulation and thrombosis, impairing the performance of implanted energy storage devices, and posing a serious threat to human health. Therefore, this work aims to design an anticoagulant supercapacitor by heparin doped poly(3, 4-ethylenedioxythiophene) (PEDOT) for possible applications in implantable bioelectronics. Heparin (Hep), the as-known anticoagulant macromolecule acts as the counterion for PEDOT doping to enhance its conductivity, and the bioelectrode material PEDOT: Hep with anticoagulant activity is synthesized via chemical oxidation polymerization. Concurrently, the anticoagulant supercapacitor is constructed through in-situ polymerization, where PEDOT: Hep and bacterial cellulose as electrode material and electrolyte layer, respectively. Owing to the incorporation of heparin, the supercapacitor exhibits high hemocompatibility with hemolysis rate <5 %, good anticoagulant performance with coagulation time of 63.4 s, reasonable cycle stability with capacitance retention rate of 76.24 % after 20, 000 cycles, and supplies power for implanted heart rate sensors in female mice. This work provides a platform for implantable electronics to achieve anticoagulant activity in vivo.

Stereo-Hindrance Induced Conformal Self-Assembled Monolayer for High Efficiency Inverted Perovskite Solar Cells

Self-assembled monolayers (SAMs) are employed as hole-selective contacts in inverted perovskite solar cells (PSCs) and have achieved record power conversion efficiency (PCE) over 26%. However, the tendency of extensively employed SAM [2-(3,6-Dimethoxy-9H-carbazol-9-yl)ethyl]phosphonic acid to aggregate leads to its uneven coverage to the transparent conducting oxide substrate, which subsequently compromises the photovoltaic performance. Herein, a novel tert-butyl functionalized phosphonic acid carbazole SAM is developed, i.e., (4-(3,6-di-tert-butyl-9H-carbazol-9-yl)butyl)phosphonic acid (tBu-4PACz), and introduced to a mixed SAM system as the hole-extraction layer in inverted PSCs. The stereo-hindrance of the bulky tert-butyl group prevents undesired aggregation and leads to better conformality, which facilitates more efficient hole-extraction and suppresses interfacial recombination losses. The tBu-4PACz SAM-based inverted PSC has achieved record level PCE of 26.25% (26.21%, certificated) with outstanding fill factors over 86%. Moreover, the mixed SAM based inverted PSC devices maintained over 94.7% of their initial efficiency after 500 h continuous maximum power-point tracking under simulation 1-sun irradiation.

Uniform Phase Permutation of Efficient Ruddlesden-Popper Perovskite Solar Cells via Binary Spacers and Single Crystal Coordination

2D Ruddlesden-Popper perovskites (RPPs) have attracted extensive attention in recent years due to their excellent environmental stability. However, the power conversion efficiency (PCE) of RPP solar cells is much lower than that of 3D perovskite solar cells (PSCs), mainly attributed to their poor carrier transport performance and excessive heterogeneous phases. Herein, the binary spacers (n-butylammonium, BA and benzamidine, PFA) are introduced to regulate the crystallization kinetics and n-value phase distribution to form uniform phase permutation of RPP films. The study then incorporates n = 5 BA2MA4Pb5I16 memory single crystal to achieve ultrafast stepped-type carrier transport from the low n-value phases to the high n-value phases in the high-quality (BA0.75PFA0.25)2MA4Pb5I16 films. These binary spacers and single-crystal-assisted crystallization strategies produce high-quality films, leading to fast carrier extraction and significant nonradiative recombination suppression. The resulting PSC presents a champion PCE of 21.15% with an impressive open circuit voltage (VOC) of 1.26 V, which is the record high efficiency and VOC for low n-value RPP solar cells (n ≤ 5).

Rational Strategies to Improve the Efficiency of 2D Perovskite Solar Cells

In the quest for durable photovoltaic devices, 2D halide perovskites have emerged as a focus of extensive research. However, the reduced dimension in structure is accompanied by inferior optical-electrical properties, such as widened band gap, enhanced exciton binding energy, and obstructed charge transport. As a result, the efficiency of 2D perovskite solar cells (PSCs) lags significantly behind their 3D counterparts. To overcome these constraints, extensive investigations into materials and processing techniques are pursued rigorously to augment the efficiency of 2D PSCs. Herein, The cutting-edge delve into developments in 2D PSCs, with a focus on chemical and material engineering, as well as their structure and photovoltaic properties. The review starts with an introduction of the crystal structure, followed by the key evaluation criteria of 2D PSCs. Then, the strategies around solution chemical engineering, processing technique, and interface optimization, to simultaneously boost efficiency and stability are systematically discussed. Finally, the challenges and perspectives associated with 2D perovskites to provide insights into potential improvements in photovoltaic performance will be outlined.

Co-adsorbed self-assembled monolayer enables high-performance perovskite and organic solar cells

Self-assembled monolayers (SAMs) have become pivotal in achieving high-performance perovskite solar cells (PSCs) and organic solar cells (OSCs) by significantly minimizing interfacial energy losses. In this study, we propose a co-adsorb (CA) strategy employing a novel small molecule, 2-chloro-5-(trifluoromethyl)isonicotinic acid (PyCA-3F), introducing at the buried interface between 2PACz and the perovskite/organic layers. This approach effectively diminishes 2PACz's aggregation, enhancing surface smoothness and increasing work function for the modified SAM layer, thereby providing a flattened buried interface with a favorable heterointerface for perovskite. The resultant improvements in crystallinity, minimized trap states, and augmented hole extraction and transfer capabilities have propelled power conversion efficiencies (PCEs) beyond 25% in PSCs with a p-i-n structure (certified at 24.68%). OSCs employing the CA strategy achieve remarkable PCEs of 19.51% based on PM1:PTQ10:m-BTP-PhC6 photoactive system. Notably, universal improvements have also been achieved for the other two popular OSC systems. After a 1000-hour maximal power point tracking, the encapsulated PSCs and OSCs retain approximately 90% and 80% of their initial PCEs, respectively. This work introduces a facile, rational, and effective method to enhance the performance of SAMs, realizing efficiency breakthroughs in both PSCs and OSCs with a favorable p-i-n device structure, along with improved operational stability.

Halogen-Functionalized Hole Transport Materials with Strong Passivation Effects for Stable and Highly Efficient Quasi-2D Perovskite Solar Cells

The performance of quasi-two-dimensional (Q-2D) perovskite solar cells (PSCs) strongly depends on the interface characteristics between the hole transport material (HTM) and the perovskite layer. In this work, we designed and synthesized a series of HTMs with triphenylamine-carbazole as the core structure and modified end groups with chlorine and bromine atoms. These HTMs show deeper highest occupied molecular orbital energy levels than commercial HTMs. This reduced energy band mismatch between the HTM and perovskite layer facilitates efficient charge extraction at the interface. Moreover, these HTMs containing halogen atoms on the end groups could form halogen bonding with the Pb2+ ions at the buried interface of the perovskite layer, effectively passivating defects to suppress nonradiative recombination. Additionally, halogen bonding also contributes to the formation of vertically oriented perovskite crystals with a high quality. By incorporation of chlorohexane-substituted HTMs, the resultant Q-2D PSCs exhibited the highest power conversion efficiency of 21.07%. Furthermore, the devices show improved stability, retaining 97.2% of their initial efficiency after 1100 h of continuous illumination.

Assembling the 2D-3D-2D Heterostructure of Quasi-2D Perovskites for High-Performance Solar Cells

Quasi-two-dimensional (quasi-2D) layered perovskites with mixed dimensions offer a promising avenue for stable and efficient solar cells. However, randomly distributed three-dimensional (3D) perovskites near the film surface limit the device performance of quasi-2D perovskites due to increased nonradiative recombination and ion migration. Herein, we construct a 2D (n = 4 top)-3D-2D (n = 2 bottom) heterostructure of quasi-2D perovskites by using 3-chlorobenzylamine iodine, which can effectively reduce defect density and restrain ion migration. A champion efficiency of 22.22% for quasi-2D perovskite solar cells is achieved due to remarkably reduced nonradiative voltage loss and increased electron extraction. Additionally, the 2D-3D-2D perovskite solar cells also exhibit excellent thermal and humidity stabilities, retaining over 90 and 85% of the initial efficiencies after 2000 h under a heat stress of 65 °C and at air ambient of ∼50% humidity, respectively. Our results provide a general approach to tune perovskite films for suppressing ion migration and achieving high-performance perovskite solar cells.

Tuning Hole Transport Properties and Perovskite Crystallization via Pyridine-Based Molecules for Quasi-2D Perovskite Solar Cells

Quasi-2D perovskites show great potential as photovoltaic devices with superior stability, but the power conversion efficiency (PCE) is limited by poor carrier transport. Here, it is simultaneously affected the hole transport layer (HTL) and the perovskite layer by incorporating pyridine-based materials into poly(3,4-ethylenedioxythiophene): polystyrene sulfonate (PEDOT:PSS) to address the key problem above in 2D perovskites. With this approach, the enhanced optoelectronic performance of the novel PEDOT:PSS is due to electron transfer between the additives and PEDOT or PSS, as well as a dissociation between PEDOT and PSS based on experimental and theoretical studies, which facilitates the charge extraction and transfer. Concurrently, in-situ X-ray scattering studies reveal that the introduction of pyridine-based molecules alters the transformation process of the perovskite intermediate phase, which leads to a preferred orientation and ordered distribution caused by the Pb─N chemical bridge, achieving efficient charge transport. As a result, the pyridine-treated devices achieve an increased short-circuit current density (Jsc) and PCE of over 17%.

Improve the Charge Carrier Transporting in Two-Dimensional Ruddlesden-Popper Perovskite Solar Cells

Conventional 3D organic-inorganic halide perovskite materials have shown substantial potential in the field of optoelectronics, enabling the power conversation efficiency of solar cells beyond 26%. A key challenge limiting the further commercial application of 3D perovskite solar cells is their inherent instability over outer oxygen, humidity, light, and heat. By contrast, 2D Ruddlesden-Popper (2DRP) perovskites with bulky organic cations can effectively stabilize the inorganic slabs, yielding excellent environmental stability. However, the efficiencies of 2DRP perovskite solar cells are much lower than those of the 3D counterparts due to poor charge carrier transporting property of insulating bulky organic cations. Their inner structural, dielectric, optical, and excitonic properties remain to be primarily studied. In this review, the main reasons for the low efficiency of 2DRP perovskite solar cells are first analyzed. Next, a detailed description of various strategies for improving the charge carrier transporting of 2DRP perovskites is provided, such as bandgap regulation, perovskite crystal phase orientation and distribution, energy level matching, interfacial modification, etc. Finally, a summary is given, and the possible future research directions and methods to achieve high-efficiency and stable 2DRP perovskite solar cells are rationalized.

Interlayer Carrier Dynamics in Two-Dimensional Perovskites Determined by the Length of Conjugated Organic Cations

Unlocking the restricted interlayer carrier transfer in a two-dimensional perovskite is a crucial means to achieve the harmonization of efficiency and stability in perovskite solar cells. In this work, the effects of conjugated organic molecules on the interlayer carrier dynamics of 2D perovskites were investigated through nonadiabatic molecular dynamics simulations. We found that elongated conjugated organic cations contributed significantly to the accelerated interlayer carrier dynamics, originating from lowered transport barrier and boosted π-p coupling between organic and inorganic layers. Utilizing conjugated molecules of moderate length as spacer cations can yield both superior efficiency and exceptional stability simultaneously. However, conjugated chains that are too long lead to structural instability and stronger carrier recombination. The potential of conjugated chain-like molecules as spacer cations in 2D perovskites has been demonstrated in our work, offering valuable insights for the development of high-performance perovskite solar cells.

Impact of Alkyl Chain Length on the Formation of Regular- and Reverse-Graded Quasi-2D Perovskite Thin Films

Crystallization of low-dimensional perovskites is a complex process that leads to multidimensional films comprising two-dimensional (2D), quasi-2D, and three-dimensional (3D) phases. Most quasi-2D perovskite films possess a regular gradient with 2D phases located at the bottom of the film and 3D phases at the top. Recently, multiple studies have reported reverse-graded perovskite films, where the location of the 2D and 3D structures is inverted. The underlying reasons for such a peculiar phase distribution are unclear. While crystallization of regular-graded quasi-2D perovskites has been described as starting with 3D phases from the liquid-air interface, the film formation of reverse-graded films has not been investigated yet. Here, we examine the impact of the alkyl chain length on the formation of regular- and reverse-graded perovskites using n-alkylammonium ions. We find that long alkyl chains reverse the phase distribution gradient. By combining photoluminescence spectroscopy with in situ optical absorption measurements, we demonstrate that crystallization starts at the liquid-N2 interface, though as 3D phases for short-chain n-alkylammonium ions and as quasi-2D phases for long chains. We link this behavior to enhanced van der Waals interactions between long-chain n-alkylammonium ions in polar solvents and their tendency to accumulate at the liquid-N2 interface, creating a concentration gradient along the film thickness.

Multiple Phase Regulation Enables Efficient and Bright Quasi-2D Perovskite Light-Emitting Diodes

Quasi-2D perovskites, multiquantum well materials with the energy cascade structure, exhibit impressive optoelectronic properties and a wide range of applications in various optoelectronic devices. However, the insufficient exciton energy transfer caused by the excess of small-n phases that induce nonradiative recombination and the spatially random phase distribution that impedes charge transport severely inhibit the device performance of light-emitting diodes (LEDs). Here, a faster energy transfer process and efficient carrier recombination are achieved by introducing the multifunctional additive 2-(methylsulfonyl)-4-(trifluoromethyl)benzoic acid (MTA) to manipulate the crystallization process of perovskites. The introduction of MTA not only constrains the PEA and restrains the formation of small-n phases to improve the energy transfer process but also optimizes the crystal orientation to promote charge transport. As a result, highly efficient pure green quasi-2D perovskite LEDs with a peak EQE of 25.9%, a peak current efficiency of 108.1 cd A-1, and a maximum luminance of 288798 cd m-2 are achieved.

Layered Low-Dimensional Ruddlesden-Popper and Dion-Jacobson Perovskites: From Material Properties to Photovoltaic Device Performance

Layered low-dimensional halide perovskites (LDPs) with multiple quantum well structure have shown increasing research interest in photovoltaic solar cell applications owing to their intrinsic moisture stability and favorable photophysical properties in comparison with their three-dimensional (3D) counterparts. The most common LDPs are Ruddlesden-Popper (RP) phases and Dion-Jacobson (DJ) phases, both of which have made significant research advances in efficiency and stability. However, distinct interlayer cations between RP and DJ phase lead to disparate chemical bonds and different perovskite structures, which endow RP and DJ perovskite with distinctive chemical and physical properties. Plenty of reviews have reported the research progress of LDPs but no summary has elaborated from the perspective of the merits and drawbacks of the RP and DJ phases. Herein, in this review, we offer a comprehensive expound on the merits and promises of RP and DJ LDPs from their chemical structure, physicochemical properties, and photovoltaic performance research progress aiming to provide a new insight into the dominance of RP and DJ phases. Then, we reviewed the recent progress on the synthesis and implementation of RP and DJ LDPs thin films and devices, as well as their optoelectronic properties. Finally, we discussed the possible strategies to resolve existing toughs to realize the desired high-performance LDPs solar cells.

Hydrophobic Chain-Induced Conversion of Three-Dimensional Perovskite Nanocrystals to Gold Nanocluster-Grafted Two-Dimensional Platelets for Photoinduced Electron Transfer Substrate Formulation

Considering the augmentation of new generation energy harvesting devices and applications of electron-hole separation therein, conversion of 3D cubic CsPbBr3 perovskite nanocrystals into 2D-platelets through ligand-ligand hydrophobic interactions has been conceived here. Cationic surfactants with various chain length coated the gold nanoclusters (AuNCs) that interact with oleic acid (OA) and oleylamine (OAm) coated 3D CsPbBr3 nanocrystals to disintegrate the crystallinity of the perovskites and reformation of AuNC-grafted 2D-platelets of unusually large size. The planar perovskite-derivatives act as an exciton donor to the embedded AuNCs through photoinduced electron transfer (PET). This process is controlled by the optimum surfactant chain length. Transient absorption spectroscopy shows that the fastest radical growth time (4 ps) was with the 14-carbon containing tail of the surfactant, followed by the 16-carbon (45 ps) and the 12-carbon (290 ps) ones. PET is administered by the energy gaps of the participating candidates that control the transition dynamics. Our findings can be a potential tool to develop metal nanocluster-based hybrid 2D perovskite-derived platelets for optoelectronic applications.

Manipulation of Charge Dynamics for Efficient and Bright Blue Perovskite Light-Emitting Diodes with Chiral Ligands

Perovskite light-emitting diodes (PeLEDs) emerge as a promising class of optoelectronic devices for next-generation displays and lighting technology. However, the performance of blue PeLEDs lags far behind that of their green and red counterparts, including the unachieved trade-off between high efficiency and high luminance, severe efficiency roll-off, and unsatisfactory power efficiency. Here, a multi-functional chiral ligand of L-phenylalanine methyl ester hydrochloride is strategically introduced into quasi-2D perovskites, which can effectively passivate defects, modulate the phase distribution, improve photoluminescence quantum yield, guarantee high-quality film morphology, and enhance charge transport. Furthermore, ladder-like hole transport layers are established, boosting charge injection and balance. The resultant sky-blue PeLEDs (the photoluminescence peak is 493 nm and the electroluminescence peak is 497 nm) exhibit an external quantum efficiency of 12.43% at 1000 cd m-2 and a record power efficiency of 18.42 lm W-1 , rendering that the performance is among the best blue PeLEDs.

Defect Regulation of Efficient Dion-Jacobson Quasi-2D Perovskite Solar Cells via a Polyaspartic Acid Interlayer

Interfacial modification is a promising strategy to fabricate highly efficient perovskite solar cells (PSCs). Nevertheless, research studies about optimization for the performance of Dion-Jacobson (DJ)-phase quasi-2D PSCs by underlying surface modification are rarely reported. The relevant influence of interfacial modification on defect regulation in the bulk and at the interface for PSCs is still unexplored. Herein, an interlayer of polyaspartic acid (PASP) was introduced at the interface of a hole transporting layer and a perovskite absorber to regulate both the film quality and interface property for BDA-based DJ quasi-2D PSCs (n = 5). The PASP interlayer suppressed the charge recombination, restricted the interfacial charge accumulation, and promoted the charge transport in devices and therefore improved the power conversion efficiency of PSCs from 15.03 to 17.34%. Moreover, through device simulation, it was concluded that the increase of open-circuit voltage (Voc) was mainly attributed to the suppression of interface defects, while the increase of short-circuit current (Jsc) was ascribed to the restriction of interface defects and perovskite bulk defects. The improvement of both Voc and Jsc originated from the passivation of shallow defect states. The present work provides a promising route for the fabrication of efficient quasi-2D PSCs and enriches the fundamental understanding of defect regulation on photovoltaic performance.

Effects of Lead Iodide Crystallization on Photovoltaic Performance of Perovskite Solar Cells by the Vapor-Solid Reaction Method

The vapor-solid reaction method (VRM) is one of the promising techniques to prepare high-performance perovskite solar cells. Herein, PbI₂ precursor films were prepared by vacuum evaporation. It was found that the PbI₂ precursor films exhibit high crystallinity and orderly morphology at the substrate temperature of 110 °C. On this basis, the precursor films were prepared by VRM to obtain high-quality perovskite films and the power conversion efficiency (PCE) of perovskite solar cells (PSCs) devices reached 17.1%. In contrast, the PbI₂ film precursor was prepared on the substrate without being heated and the PCE of the final PSCs devices was only 13.04%.

Phase-Modulated Multidimensional Perovskites for High-Sensitivity Self-Powered UV Photodetectors

2D Ruddlesden-Popper perovskites (PVKs) have recently shown overwhelming potential in various optoelectronic devices on account of enhanced stability to their 3D counterparts. So far, regulating the phase distribution and orientation of 2D perovskite thin films remains challenging to achieve efficient charge transport. This work elucidates the balance struck between sufficient gradient sedimentation of perovskite colloids and less formation of small-n phases, which results in the layered alignment of phase compositions and thus in enhanced photoresponse. The solvent engineering strategy, together with the introduction of poly(3,4-ethylene-dioxythiophene):polystyrene sulfonate (PEDOT:PSS) and PC₇₁ BM layer jointly contribute to outstanding self-powered performance of indium tin oxide/PEDOT:PSS/PVK/PC₇₁ BM/Ag device, with a photocurrent of 18.4 µA and an on/off ratio up to 2800. The as-fabricated photodetector exhibits high sensitivity characteristics with the peak responsivity of 0.22 A W^-1 and the detectivity up to 1.3 × 10¹²  Jones detected at UV-A region, outperforming most reported perovskite-based UV photodetectors and maintaining high stability over a wide spectrum ranging from UV to visible region. This discovery supplies deep insights into the control of ordered phases and crystallinity in quasi-2D perovskite films for high-performance optoelectronic devices.

Secondary Anti-Solvent Treatment for Efficient 2D Dion-Jacobson Perovskite Solar Cells

Surface defects-mediated nonradiative recombination plays a critical role in the performance and stability of perovskite solar cells (PSCs) and surface post-treatment is widely used for efficient PSCs. However, the commonly used surface passivation strategies are one-off and the passivation defect ability is limited, which can only solve part of the defects in the topmost surface area. Here, a secondary anti-solvent strategy is proposed to further reduce surface defects based on conventional surface passivation for the first time. Based on this, the crystallization quality of 2D Dion-Jacobson perovskite is enhanced and the surface defects density is further reduced by nearly two orders. In addition, a gradient structure of perovskite with n = 2 phases located at the top of the film and 3D-like phases located at the bottom of the film can also be obtained. The modulated perovskite film boosts the efficiency of 2D perovskites (n = 5) up to 19.55%. This strategy is also very useful in other anti-solvent processed perovskite dipping systems, which paves a promising avenue for minimizing surface defects toward highly efficient perovskite devices.

Synergistic Effects of Bipolar Additives on Grain Boundary-Mediated Charge Transport for Efficient Carbon-Based Inorganic Perovskite Solar Cells

Carbon-based all-inorganic CsPbI_xBr_3-x perovskite solar cells offer high stability against heat and humidity and a suitable band gap for tandem and semitransparent photovoltaics. In CsPbI_xBr_3-x perovskite films, the defects at grain boundaries (GBs) cause charge trapping, reducing the efficiency of the cell. Electronic deactivation of GB has been a conventional strategy to suppress the trapping, but at the cost of charge carrier transport through the boundaries. Here, we turn the GBs into benign charge transport pathways with the aid of bipolar charge transport semiconductors, namely, Ti₃C₂T_X (MXene) and Spiro-OMeTAD, respectively. Thanks to the synergistic effects of both n- and p-type transport media, the charge transport is improved and balanced at the GBs. As a result, the cells achieve an efficiency of 12.7%, the highest among all low-temperature-processed carbon-based inorganic perovskite solar cells. Benign GBs also lead to enhanced light and aging stabilities. Our work demonstrates a proof-of-concept strategy of benign electronic modulation of GBs for solution-processed perovskite solar cells.

Phase control of quasi-2D perovskite thin films by adding MAPbI3 in the precursor solution

Quasi two-dimensional (Q-2D) perovskite cells have attracted much attention due to their excellent stability compared to their 3D counterparts. However, the Q-2D perovskite thin films prepared by the solution method have been confirmed to be a mixture of small-n phases and large-n phases instead of a pure phase, where the amount and distribution of these phases have a great significance on the performance of Q-2D perovskite solar cells. Here, commercialized 3D perovskite powder was simply added to an ACI perovskite precursor solution to get a uniform and closely connected heterostructure in which the large-n phases can work as pathways for charge transfer. The characterization results of the films and devices show that the appropriate amount of MAPbI₃ in the precursor solution could distribute the 3D phases homogeneously within the final film to promote the photovoltaic performance of the devices. Consequently, the power conversion efficiency of the Q-2D ACI perovskite solar cell has been increased from 10.4% to 13.82% (with a 32.8% performance improvement).

Enhanced Amplified Spontaneous Emission in Quasi-2D Perovskite by Facilitating Energy Transfer

Despite the superior optoelectronic properties of quasi-two-dimensional (quasi-2D) Ruddlesden-Popper halide perovskites, the inhomogeneous distribution of mixed phases result in inefficient energy transfer and multiple emission peaks. Herein, the insufficient energy funneling process at the high-energy phase is almost completely suppressed and the excitonic understanding of gain nature is studied in the energy funneling managed quasi-2D perovskite via introducing poly(vinyl pyrrolidone) (PVP) additive. The energy transfer process is facilitated from 0.37 to 0.26 ps after introducing the PVP additive, accelerating the exciton accumulation in the emissive state, and increasing the ratio of the high-dimensional phase for enhancing radiative emission. The gain lifetime is promoted to be as fast as 28 ps to outcompete nonradiative recombination during the build-up of population inversion. Simultaneously, the net gain coefficient is increased by more than twofold that of the pristine perovskite film. Owing to the remarkable gain properties, room-temperature amplified spontaneous emission is realized with a low threshold of 11.3 μJ/cm2, 4 times lower than 43 μJ/cm2 of the pristine film. Our findings suggest that the PVP-treated quasi-2D perovskite shows great promise for high-performance laser devices.

Molecularly Controlled Quantum Well Width Distribution and Optoelectronic Properties in Quasi-2D Perovskite Light-Emitting Diodes

Owing to their excellent optoelectronic properties, quasi-2D perovskites with self-assembled multiple quantum well (MQW) structures have shown great potential in light-emitting diode (LED) applications. Understanding the correlation between the bulky cation, quantum well assembly, and optoelectronic properties of a quasi-2D perovskite is important. Here, we demonstrate that the dipole moment of the bulky cation can be one of the fundamental factors that controls the distribution and crystallinity of different quantum wells. We find that the bulky cation with a moderate dipole moment leads to moderately distributed well-width MQWs, resulting in a superior device efficiency due to the simultaneous achievement of favorable optical and electronic properties. The peak external quantum efficiency and the maximum luminance of the champion device are 10.8% and 19082 cd m^-2, respectively, positioning it among the best-performing quasi-2D green perovskite LEDs without further surface passivation or additive doping. This work provides a perspective on the rational design of bulky cations in quasi-2D perovskite LEDs, which is also essential for the development of other mixed-dimensional perovskite optoelectronic devices.

Charge-Carrier Transport in Quasi-2D Ruddlesden-Popper Perovskite Solar Cells

In recent years, 2D Ruddlesden-Popper (2DRP) perovskite materials have been explored as emerging semiconductor materials in solar cells owing to their excellent stability and structural diversity. Although 2DRP perovskites have achieved photovoltaic efficiencies exceeding 19%, their widespread use is hindered by their inferior charge-carrier transport properties in the presence of diverse organic spacer cations, compared to that of traditional 3D perovskites. Hence, a systematic understanding of the carrier transport mechanism in 2D perovskites is critical for the development of high-performance 2D perovskite solar cells (PSCs). Here, the recent advances in the carrier behavior of 2DRP PSCs are summarized, and guidelines for successfully enhancing carrier transport are provided. First, the composition and crystal structure of 2DRP perovskite materials that affect carrier transport are discussed. Then, the features of 2DRP perovskite films (phase separation, grain orientation, crystallinity kinetics, etc.), which are closely related to carrier transport, are evaluated. Next, the principal direction of carrier transport guiding the selection of the transport layer is revealed. Finally, an outlook is proposed and strategies for enhancing carrier transport in high-performance PSCs are rationalized.

Phase Tailoring of Ruddlesden-Popper Perovskite at Fixed Large Spacer Cation Ratio

Ruddlesden-Popper (RP) metal halide perovskites are considered as promising optoelectronic materials due to their good environmental stability and desirable optoelectronic properties. However, the phase composition and ordering in the deposited film, with a fixed ratio of large organic spacer cation in the precursor solution, are hard to be further tailored for specific optoelectronic applications. Herein, it is shown that even with a fixed spacer cation ratio, the phase composition and ordering can still be largely regulated by utilizing different crystallization kinetics of various cations with the inorganic octahedral lead halide. By using two different short cations to compete with the large spacer cation, the phase composition can be continuously tailored from thin multiple quantum wells (MQWs) dominated to 3D perovskite dominated. The phase ordering can be reversed from small n phases' prior to large n phases' prior near the substrate. Finally, with the same amount of large spacer cation protection, the perovskite can be tailored for both high-performance electroluminescence and photovoltaics with favorable energetic landscape for the corresponding desired first-order excitonic recombination and second-order free electron-hole recombination, respectively. This exploration substantially contributes to the understanding of precise phase engineering in RP perovskite and may provide a new insight into the design of multiple functional devices.

Interfacial Defects Change the Correlation between Photoluminescence, Ideality Factor, and Open-Circuit Voltage in Perovskite Solar Cells

The ideality factor (n_id ) and photoluminescence (PL) analyses assess charge recombination characteristics in perovskite solar cells (PeSCs). However, their correlations with open-circuit voltage (V_oc ) are often found to be complicated depending on the recombination types in the devices. Herein, the correlation of n_id , PL characteristics and V_oc is elucidated depending on the interfacial crystal quality in triple-cation mixed-halide perovskite, Cs_0.05 (MA_0.17 FA_0.83 )_0.95 Pb(I_0.83 Br_0.17 )₃ , deposited on different hole transport layers (HTLs). In the devices with low quality interfacial crystals, V_oc increases together with n_id , which originates from the light intensity-dependence of majority carrier at the interface. Meanwhile, a negative correlation between V_oc and n_id is observed for devices with high quality interfacial crystals. The authors discuss the cases that PL enhancement by the improvement of overall crystal quality can fail to correlate with a V_oc increase if interfacial crystal quality becomes worse. The study highlights that interfacial crystal quality evaluation can help to understand charge recombination via n_id and PL measurements, and more importantly provide information of which defect engineering between at the interface and in the bulk would be more effective for device optimization.

Stable Layered 2D Perovskite Solar Cells with an Efficiency of over 19% via Multifunctional Interfacial Engineering

Layered 2D perovskites have been extensively investigated by scientists with photovoltaics (PV) expertise due to their good environmental stability. However, a random phase distribution in the perovskite film could affect both the performance and stability of the devices. To overcome this problem, we propose multifunctional interface engineering of 2D GA₂MA₄Pb₅I₁₆ perovskite by employing guanidinium bromide (GABr) on top of it to optimize the secondary crystallization process. It is found that GABr treatment can facilitate to form a shiny and smooth surface of the 2D GA₂MA₄Pb₅I₁₆ film with excellent optoelectronic properties. Thus, we realize efficient and stable 2D perovskite solar cells (PSCs) with a champion power conversion efficiency (PCE) of 19.3% under AM 1.5G illumination. Additionally, the optimized device without encapsulation could retain 94% of the initial PCE for more than 3000 h after being stored under ambient conditions.

A Universal Approach for Controllable Synthesis of n-Specific Layered 2D Perovskite Nanoplates

2D perovskites with chemical formula A'₂ A_n-1 B_n X_3n+1 have recently attracted considerable attention due to their tunable optical and electronic properties, which can be attained by varying the chemical composition. While high color-purity emitting perovskite nanomaterials have been accomplished through changing the halide composition, the preparation of single-phase, specific n-layer 2D perovskite nanomaterials is still pending because of the fast nucleation process of nanoparticles. We demonstrate a facile, rational and efficacious approach to synthesizing single-phase 2D perovskite nanoplates with a designated n number for both lead- and tin-based perovskites through kinetic control. Casting carboxylic acid additives in the reaction medium promotes selective formation of the kinetic product-multilayer 2D perovskite-in preference to the single-layer thermodynamic product. For the n-specific layered 2D perovskites, decreasing the number of octahedral layers per inorganic sheet leads to an increase of photoluminescence energy, radiative decay rate, and a significant boost in photostability.

High-Quality Ruddlesden-Popper Perovskite Film Formation for High-Performance Perovskite Solar Cells

In the last decade, perovskite solar cells (PSCs) have undergone unprecedented rapid development and become a promising candidate for a new-generation solar cell. Among various PSCs, typical 3D halide perovskite-based PSCs deliver the highest efficiency but they suffer from severe instability, which restricts their practical applications. By contrast, the low-dimensional Ruddlesden-Popper (RP) perovskite-based PSCs have recently raised increasing attention due to their superior stability. Yet, the efficiency of RP perovskite-based PSCs is still far from that of the 3D counterparts owing to the difficulty in fabricating high-quality RP perovskite films. In pursuit of high-efficiency RP perovskite-based PSCs, it is critical to manipulate the film formation process to prepare high-quality RP perovskite films. This review aims to provide comprehensive understanding of the high-quality RP-type perovskite film formation by investigating the influential factors. On this basis, several strategies to improve the RP perovskite film quality are proposed via summarizing the recent progress and efforts on the preparation of high-quality RP perovskite film. This review will provide useful guidelines for a better understanding of the crystallization and phase kinetics during RP perovskite film formation process and the design and development of high-performance RP perovskite-based PSCs, promoting the commercialization of PSC technology.

Smoothing the energy transfer pathway in quasi-2D perovskite films using methanesulfonate leads to highly efficient light-emitting devices

Quasi-two-dimensional (quasi-2D) Ruddlesden–Popper (RP) perovskites such as BA₂Cs_n–1Pb_nBr_3n+1 (BA = butylammonium, n > 1) are promising emitters, but their electroluminescence performance is limited by a severe non-radiative recombination during the energy transfer process. Here, we make use of methanesulfonate (MeS) that can interact with the spacer BA cations via strong hydrogen bonding interaction to reconstruct the quasi-2D perovskite structure, which increases the energy acceptor-to-donor ratio and enhances the energy transfer in perovskite films, thus improving the light emission efficiency. MeS additives also lower the defect density in RP perovskites, which is due to the elimination of uncoordinated Pb²⁺ by the electron-rich Lewis base MeS and the weakened adsorbate blocking effect. As a result, green light-emitting diodes fabricated using these quasi-2D RP perovskite films reach current efficiency of 63 cd A⁻¹ and 20.5% external quantum efficiency, which are the best reported performance for devices based on quasi-2D perovskites so far.

Owing to large exciton binding energy, quasi-2D perovskite is promising for light-emitting application, yet inhomogeneous phases distribution limits the potential. Here, the authors improve the performance by using MeS additive to regulate the phase distribution and to reduce defect density in the films.

Additive Engineering by Bifunctional Guanidine Sulfamate for Highly Efficient and Stable Perovskites Solar Cells

High efficiency and good stability are the challenges for perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high defect density and internal nonradiative recombination of perovskite (PVK) limit its development. In this work, a facile additive strategy is devised by introducing bifunctional guanidine sulfamate (GuaSM; CH₆ N₃ ⁺ , Gua⁺ ; H₂ N-SO₃ ^- , SM^- ) into PVK. The size of Gua⁺ ion is suitable with Pb(BrI)₂ cavity relatively, so it can participate in the formation of low-dimensional PVK when mixed with Pb(BrI)₂ . The O and N atoms of SM^- can coordinate with Pb²⁺ . The synergistic effect of the anions and cations effectively reduces the trap density and the recombination in PVK, so that it can improve the efficiency and stability of PSCs. At an optimal concentration of GuaSM (2 mol%), the PSC presents a champion power conversion efficiency of 21.66% and a remarkably improved stability and hysteresis. The results provide a novel strategy for highly efficient and stable PSCs by bifunctional additive.

Stable High-Efficiency Two-Dimensional Perovskite Solar Cells Via Bromine Incorporation

Two-dimensional (2D) organic-inorganic perovskites as one of the most important photovoltaic material used in solar cells have attracted remarkable attention. These 2D perovskites exhibit superior environmental stability and wide tunability of their optoelectronic properties. However, their photovoltaic performance is far behind those of traditional three-dimensional (3D) perovskites. In this work, we demonstrate the power conversion efficiency (PCE) of 2D perovskite solar cells (PVSCs) is greatly improved from 3.01% for initial to 12.19% by the incorporation of PbBr₂. The enhanced efficiency is attributed to superior surface quality, enhanced crystallinity, and the resulting reduced trap-state density. Furthermore, PbBr₂ incorporated devices without encapsulation show excellent humidity stability, illumination stability, and thermal stability. This work provides a universal and viable avenue toward efficient and stable 2D PVSCs.

Layered perovskite materials: key solutions for highly efficient and stable perovskite solar cells

Metal halide perovskites having three-dimensional crystal structures are being applied successfully in various optoelectronic applications. To address their most challenging issues-instability and toxicity-without losing efficiency, lower-dimensional perovskites appear to be promising alternatives. Recently, two-dimensional (2D) perovskite solar cells have been developed exhibiting excellent photostability and moisture-stability, together with moderate device efficiency. This review summarizes the photophysical properties and operating mechanisms of 2D perovskites as well as recent advances in their applications in solar cell devices. Also presented is an agenda for the next-stage development of stable perovskite materials for solar cell applications, highlighting the issues of stability and toxicity that require further study to ensure commercialization.

Structurally Tunable Two-Dimensional Layered Perovskites: From Confinement and Enhanced Charge Transport to Prolonged Hot Carrier Cooling Dynamics

Two-dimensional (2D) layered metal halide perovskites are potential alternatives to three-dimensional perovskites in optoelectronic applications owing to their improved photostabilities and chemical stabilities. Recent investigations of 2D metal halide perovskites have demonstrated interesting optical and electronic properties of various structures that are controlled by their elemental composition and organic spacers. However, photovoltaic devices that utilize 2D perovskites suffer from poor device efficiency due to inefficient charge carrier separation and extraction. In this Perspective, we shed light on confinement control and structural variation strategies that provide better parameters for the efficient collection of charges. The influence of these strategies on the exciton binding energies, charge-carrier mobilities, hot-carrier dynamics, and electron-phonon coupling in 2D perovskites is thoroughly discussed; these parameters highlight unique opportunities for further system optimization. Beyond the tunability of these fundamental parameters, we conclude this Perspective with the most notable strategies for attaining 2D perovskites with reduced bandgaps to better suit photovoltaic applications.

Structured Perovskite Light Absorbers for Efficient and Stable Photovoltaics

Organic-inorganic hybrid lead-halide perovskite materials (ABX₃ ) have attracted widespread attention in the field of photovoltaics owing to their impressive optical and electrical properties. However, obstacles still exist in the commercialization of perovskite photovoltaics, such as poor stability, hysteresis, and human toxicity. A-site cation engineering is considered to be a powerful tool to tune perovskite structures and the resulting optoelectronic properties. Based on the selection and combination of A-site cations, three types of perovskite structures, i.e., 3D perovskite, reduced-dimensional (2D/quasi-2D) perovskite, and 2D/3D hybrid perovskite can be formed. Herein, the remarkable breakthroughs resulting from these three perovskite structures are summarized, and their corresponding properties and characteristics, as well as their intrinsic disadvantages, are highlighted. By summarizing recent research progress, a new viewpoint for improving the performance and stability of perovskite photovoltaics is provided.

Engineering of Electron Extraction and Defect Passivation via Anion-Doped Conductive Fullerene Derivatives as Interlayers for Efficient Invert Perovskite Solar Cells

The major limitation of organic-inorganic perovskite solar cell performance is the existence of numerous charged defects at the absorption layer surface, which caused the charge carrier to recombine depravation. These defects have a remarkable influence on charge extraction, which further caused the instability of the device and induced severe hysteresis. Here, three low-cost anion-doped conductive fullerene derivatives, fullerene bis(phenethyl alcohol) malonate (FMPE-I), fullerene bis(ethylenediamine) malonamide (FEDA-I), and fullerene bis(propanediamine) malonamide (FPDA-I), are developed for the first time as interfacial layers between perovskite and phenyl-C₆₁-butyric acid methyl ester (PCBM) in planar invert perovskite solar cells by mild solution fabrication. The constituent Lewis basic halides and the specific amide groups of conductive fullerene derivatives efficaciously heighten the chemical interaction between perovskite and conductive fullerene derivatives since the iodide can combine with undercoordinated Pb²⁺ by electrostatic interaction and the amide group can facilely be combined with I by hydrogen bonding, improving the dual passivation of perovskite defects. Moreover, due to the well-matched energy level of conductive fullerene derivatives and the high conductivity of the perovskite/interlayer film, the electron extraction capacity can be effectively enhanced. Consequently, superior optoelectronic properties are achieved with an improved power conversion efficiency of 17.63%, which is considerably higher than that of the bare PCBM-based devices (14.96%), for the perovskite device with conductive interlayer treatment along with negligible hysteresis. Moreover, hydrophobic conductive fullerene derivatives improve the resistance of the device to moisture. The conductive fullerene derivative-based devices without encapsulation are maintained at 85% of the pristine power conversion efficiency value after storage under ambient conditions (25 °C temperature, 60% humidity) for 500 h.

Controllable Two-dimensional Perovskite Crystallization via Water Additive for High-performance Solar Cells

Steering the crystallization of two-dimensional (2D) perovskite film is an important strategy to improve the power conversion efficiency (PCE) of 2D perovskite solar cells (PVSCs). In this paper, the deionized water (H₂O) additive is introduced into the perovskite precursor solution to prepare high-quality 2D perovskite films. The 2D perovskite film treated with 3% H₂O shows a good surface morphology, increased crystal size, enhanced crystallinity, preferred orientation, and low defect density. The fabricated 2D PVSC with 3% H₂O exhibits a higher PCE compared with that without H₂O (12.15% vs 2.29%). Furthermore, the shelf stability of unsealed devices with 3% H₂O under ambient environment is significantly improved. This work provides a simple method to prepare high-quality 2D perovskite films for efficient and stable 2D PVSCs.

Defect Control Strategy by Bifunctional Thioacetamide at Low Temperature for Highly Efficient Planar Perovskite Solar Cells

Titania (TiO₂) has wide applications in the realm of perovskite solar cells (PSCs). Because high-temperature processing severely limits the application of flexible and tandem devices, it is significant to develop a high-quality electron-transport layer (ETL) by low-temperature processing. Here, we design a new strategy by introducing a bifunctional molecule (thioacetamide, TAA) in the TiO₂ ETL. During the low-temperature annealing, the N and S atoms in TAA can bond with the Ti atom in the ETL and the Pb atom in the perovskite (PVK) layer, respectively. The formation of coordinate bonds is beneficial to increase the crystallinity and reduce the roughness of TiO₂ ETLs and PVK layers, which effectively passivate the defects. Meanwhile, the energy level matching between the ETL and PVK is optimized. The structure characterization and electrochemical measurement demonstrate the design. Compared with precursor doping, surface spin-coating is a more effective method for introducing TAA into TiO₂. Significantly, the PSC based on the surface spin-coated TAA TiO₂ ETL achieves the best power conversion efficiency (PCE) of 21.17%. Nevertheless, the PSC fabricated with the pristine TiO₂ ETL offers a PCE of 19.52% under the same conditions. The results demonstrate a novel method for optimizing the properties of PSCs.

Interfacial and structural modifications in perovskite solar cells

The rapid and continuous progress made in perovskite solar cell (PSC) technology has drawn considerable attention from the photovoltaic research community, and the application of perovskites in other electronic devices (such as photodetectors, light-emitting diodes, and batteries) has become imminent. Because of the diversity in device configurations, optimization of film deposition, and exploration of material systems, the power conversion efficiency (PCE) of PSCs has been certified to be as high as 25.2%, making this type of solar cells the fastest advancing technology until now. As demonstrated by researchers worldwide, controlling the morphology and defects in perovskite films is essential for attaining high-performance PSCs. In this regard, interface engineering has proven to be a very efficient way to address these issues, obtaining better charge collection efficiency, and reducing recombination losses. In this review, the interfacial modification between perovskite films and charge-transport layers (CTLs) as well as CTLs and electrodes of PSCs has been widely summarized. Grain boundary (GB) engineering and stress engineering are also included since they are closely related to the improvement in device performance and stability.

Enhancing Device Performance in Quasi-2D Perovskite ((BA)2(MA)3Pb4I13) Solar Cells Using PbCl2 Additives

Quasi-2D Ruddlesden-Popper perovskites exhibit excellent photostability/environmental stability. However, the main drawback is their relatively low photovoltaic properties compared with three-dimensional perovskites. Herein, we demonstrated that chlorine-based additives via adjusting the proportion of PbI₂ and PbCl₂ in the precursor (BA)₂(MA)₃Pb₄I₁₃ (n = 4) solutions show an optimized device performance of over 15%, and the devices exhibit much improved humidity stability. Upon PbCl₂ addition, the quasi-2D perovskites have larger and more compact grains, which result in high quality of films. The photoluminescence gives rise to a much prolonged lifetime under the PbCl₂ additive, indicating fewer trap states to reduce the nonradiative recombination. The capacitance characteristics confirm that the PbCl₂ additive can largely decrease the trap states in quasi-2D perovskite films. The capacitance-voltage characteristics indicate that using the PbCl₂ additive decreases the charge accumulation toward increasing the charge collection in quasi-2D perovskite solar cells. Our work indicates that the addition of PbCl₂ is an effective method to improve the device performance by reducing trap states and increasing charge collection toward developing high-performance quasi-2D perovskite devices.