Direct electronetting of high-performance membranes based on self-assembled 2D nanoarchitectured networks

Programming One-Dimensional Open-Channel Superlattices with Edge-Bonding of Meta-DNA

The physicochemical properties of one-dimensional (1D) porous nanomaterials are fundamentally influenced by their channel geometrical and topological characteristics. However, synthesis of geometrically and topologically diversified 1D porous crystals spanning the mesoporous-to-macroporous range remains a significant challenge. Here, we present a universal strategy for constructing 1D open-channel superlattices through edge-to-edge assembly (edge-bonding) of DNA-sparsely modified meta-DNA (M-DNA). By programming the rigidity and length of sparsely distributed DNA bonds on M-DNA surfaces, we achieved long-range ordered assembly of triangular M-DNA 1D single-channel superlattice (3.7 ± 1.2 µm) with a macroporous structure. The generality of this approach was further demonstrated by assembling hexagonal M-DNA into 1D multi-channel superlattice (3.6 ± 1.0 µm) with a mesoporous structure, thereby reducing the pore size from 140 to 29 nm and the porosity from ∼94.2 to ∼87.5%. Furthermore, an ultrathin gold layer grown on the triangular M-DNA superlattice exhibited a ∼3.3-fold enhancement in electrocatalytic activity compared to non-assembled triangular M-DNA, attributed to the increased surface area and narrower bandgap. This work broadens the design framework for porous crystals assembled via DNA nanotechnology and highlights their potential applications in catalysis, energy conversion, and beyond.

Electrospun PLA/DTAC Bicomponent Membranes for Low-Resistance and Antibacterial Air Filtration

Polylactic acid (PLA) fiber membranes fabricated through electrospinning exhibit significant potential for air filtration. However, their efficiency in filtering highly permeable particulate matter (PM) is limited, as these particles can carry various bacteria and toxic substances. To address this challenge, the dielectric properties of PLA are enhanced by incorporating dodecyl trimethyl ammonium chloride (DTAC), leading to the formation of a bimodal micro/nanofiber structure via conjugated electrospinning. This innovative structure effectively reduces air resistance while maintaining high filtration efficiency. The filtration performance, including filtration efficiency, pressure drop, long-term stability, and overall effectiveness, was systematically investigated. The results demonstrate that the conjugated electrospun filtration membrane achieves a filtration efficiency of 99.51% for PM0.3 and 99.97% for PM2.5. Additionally, it exhibits a high-quality factor (0.0555 Pa⁻1 for PM0.3 and 0.0846 Pa⁻1 for PM2.5), long-term stability (with PM0.3 efficiency decreasing by only 2.78% and PM2.5 efficiency decreasing by 0.01% after two months), and excellent bactericidal effects against E. coli and S. aureus due to the incorporated DTAC. Therefore, this method not only enhances filtration efficiency and reduces filtration resistance but also provides an effective approach for developing efficient filtration materials with antibacterial properties.

Fluorine-Free Nanofiber/Network Membranes with Interconnected Tortuous Channels for High-Performance Liquid-Repellency and Breathability

The excessive use of fluoride in fibrous membranes poses significant bioaccumulative threats to the environment and human health. However, most existing membranes used in protective clothing and desalination systems show high fluorine dependence and inevitable trade-offs between liquid repellency and breathability. Herein, fluorine-free bonded scaffolded nanofiber/network membranes are developed using the electro-coating-netting technique to achieve high-performance liquid-repellency and breathability. By manipulating the stretching of electrospun jets and the polarization of electrets, rough and electrostatic wetting nanofibers are obtained as scaffolds, on which long-chain alkyl precursors are coated to assemble 2D networks consisting of nanowires with diameters of ∼42 nm and bonding points. The resultant fluorine-free membranes exhibit small pore sizes of ∼460 nm, highly interconnected tortuous channels, a water contact angle of ∼138°, and elastic elongation up to 300%, thereby providing both high-performance liquid repellency (125 kPa) and vapor permeability (4206 g m-2 d-1), making them effective for use in protective clothing and desalination. This work could inspire innovative design of ecofriendly nanofibrous materials for high-performance filtration and separation.

Scalable pilot production of highly efficient 5-ply respiratory masks enhanced by bacterial cellulose nanofibers

This study presents the pilot-scale production of highly efficient real respiratory masks enhanced by bacterial cellulose nanofibers (BCNFs). The BCNFs suspension was deposited onto tissue paper substrates using fog spray technique with three BCNFs grammage levels of 0.5, 1, and 2 g/m2, followed by freeze drying. Also, two continuous and batch welding processes have been used to construct the core structure of the masks. Field emission scanning electron microscopy (FE-SEM) confirmed the uniform distribution and size of fog-sprayed BCNFs and their pore networks. With increase in BCNFs grammage, the adsorption efficiency of masks increased in both continuous and batch production methods. The mask produced through batch processing showed the highest efficiency of 99.2 % (N99) for the particulate matter of 0.3 μm, while the maximum corresponding efficiency value in continuous processing was 95.4 % (N95). The pressure drops of the masks increased with the increase in BCNFs grammage in both methods. The maximum pressure drops of N95 and N99 masks obtained were 112 ± 10 Pa and 128 ± 8 Pa, respectively. Notably, the filtration efficacy of masks was preserved when subjected to relative humidity fluctuations ranging from 30 % to 70 %. The successful findings of this study offer significant promise for future air filtration applications.

Synthesis of a Quaternary Ammonium-Halamine and Preparation on the Modified Nanofibrous Filter with Superior Sterilization, Air Filtration, and Biodegradability

The outbreak of the 2019 coronavirus pandemic has raised worldwide attention about self-protection from airborne diseases. Air filtration and wearing mask have been proven to be effective measures in reducing the pathogenic aerosol's transmission. Those lead to an increasing demand of high-efficient filters. However, the nonbiodegradable polymeric materials used in filters can accumulate in landfills or ecosystems, potentially causing pollution after improper disposals. Sustainable and biodegradable alternatives to current filter materials are urgently needed. Yet, very few commercial filters meet these needs. In this paper, a novel quaternary ammonium-halamine compound containing Schiff base and a sandwich-structured preparation strategy were developed. The obtained multifunctional filter consists of a PLA fleece as a support layer, an antimicrobial coating for bactericidal function, and a nanofibrous membrane for the particle removal. The filter demonstrates strong bactericidal properties, killing 97% of Escherichia coli and Staphylococcus aureus at a biocide concentration of only 1 mg/mL. It can rapidly kill bacteria within 5 min contact without leaching antimicrobial substances. Furthermore, it boasts a filtration performance with a success rate over 99.99% and a pressure drop of 45 Pa, which surpasses that of commercial N95 filters for PM0.3. Even under humid conditions, it maintains excellent filtration performance. Our reusability testing result of the developed filters shows that a simple halogenation treatment can renew the halamines and restore the filter's antimicrobial activity. The filters can degrade in natural soil. The successful development of this sustainable and biodegradable filter material offers a new alternative for high-performance air quality control that protect public health.

E-Skin and Its Advanced Applications in Ubiquitous Health Monitoring

E-skin is a bionic device with flexible and intelligent sensing ability that can mimic the touch, temperature, pressure, and other sensing functions of human skin. Because of its flexibility, breathability, biocompatibility, and other characteristics, it is widely used in health management, personalized medicine, disease prevention, and other pan-health fields. With the proposal of new sensing principles, the development of advanced functional materials, the development of microfabrication technology, and the integration of artificial intelligence and algorithms, e-skin has developed rapidly. This paper focuses on the characteristics, fundamentals, new principles, key technologies, and their specific applications in health management, exercise monitoring, emotion and heart monitoring, etc. that advanced e-skin needs to have in the healthcare field. In addition, its significance in infant and child care, elderly care, and assistive devices for the disabled is analyzed. Finally, the current challenges and future directions of the field are discussed. It is expected that this review will generate great interest and inspiration for the development and improvement of novel e-skins and advanced health monitoring systems.

A robust triphenylamine-based monolithic polymer network for selective sieving of CO2 and PM from flue gas

The increasingly urgent issue of climate change is driving the development of carbon dioxide (CO2) capture and separation technologies in flue gas after combustion. The monolithic adsorbent stands out in practical adsorption applications for its simplified powder compaction process while maintaining the inherent balance between energy consumption for regeneration and selectivity for adsorption. However, optimizing the adsorption capacity and selectivity of CO2 separation materials remains a significant challenge. Herein, we synthesized monolithic polymer networks (N-CMPs) with triphenylamine adsorption sites, acid-base environment tolerance, and precise narrow microchannel pore systems for the selective sieving of CO2 and particulate matter (PM) in flue gas. The inherent continuous covalent bonding of N-CMPs, along with their highly delocalized π-π conjugated porous framework, ensures the stability of the monolithic polymer network's adsorption and separation capabilities under wet and acid-base conditions. Specifically, under the conditions of 1 bar at 273 K, the CO2 adsorption capacity of N-CMP-1 is 3.35 mmol/g. Attributed to the highly polar environment generated by triphenylamine and the inherent high micropore/mesopore ratio, N-CMPs exhibit an excellent ideal adsorbed solution theory (IAST) selectivity for CO2/N2 under simulated flue gas conditions (CO2/N2 = 15:85). Dynamic breakthrough experiments further visualize the high separation efficiency of N-CMPs in practical adsorption applications. Moreover, under acid-base conditions, N-CMPs achieve a capture efficiency exceeding 99.76 % for PM0.3, enabling the selective separation of CO2 and PM in flue gas. In fact, the combined capture of hazardous PM and CO2 from the exhaust gases produced by the combustion of fossil fuels will play a pivotal role in mitigating climate change and environmental issues until low-carbon and alternative energy technologies are widely adopted.

High-Performance Membranes Based on Spherical-Beaded Nanofibers and Nanoarchitectured Networks for Water-in-Oil Emulsion Separation

High-performance separation materials for oil-water emulsions are crucial to environmental protection and resource recovery; however, most existing fibrous separation materials are subject to large pore size and low porosity, resulting in limited separation performance. Herein, we create high-performance membranes consisting of spherical-beaded nanofibers and nanoarchitectured networks (nano-nets) using electrostatic spinning/netting technology, for water-in-oil emulsion separation. By manipulating the nonequilibrium stretching of jets, spherical-beaded nanofibers capable of generating a robust microelectric field are fabricated as scaffolds, on which charged droplets are induced to eject and phase separate to self-assemble nano-nets with small pores. Benefiting from 3D undulating networks with cavities originating from 2D nano-nets supported by 1D spherical-beaded nanofibers, the membranes exhibit under-oil superhydrophobicity (>152°), a striking separation performance with an efficiency of >99.2% and a flux of 5775 L m-2 h-1, together with wide pressure applicability, antifouling, and reusability. This work may open up new horizons in developing fibrous materials for separation and purification.

Fluorine-Free Amphiphobic SBS/PAN Micro/Nanofiber Membrane by Integrating Click Reaction with Electrospinning for Efficient and Recyclable Air Filtration

The membrane fouling derived from the accumulated dust pollutants and highly viscous oily particles causes irreversible damage to the filtration performance of air filters and results in a significant reduction in their service life. However, it is still challenging to construct high-efficiency and antifouling air filtration membranes with recyclable regeneration. Herein, the fluorine-free amphiphobic micro/nanofiber composite membrane was controllably constructed by integrating click chemistry reaction and electrospinning technique. Low-surface-energy fibers were constructed by a thiol-ene click chemical reaction between mercaptosilane and vinyl groups of polystyrene-butadiene-styrene (SBS), combined with hydroxyl-terminated poly(dimethylsiloxane) during the electrospinning process. The functional air filter is then prepared by the two-layer composite strategy. Because of the advantages of liquid-like fibrous surface and micro/nanofibrous porous structure, SBS/PAN composite membrane simultaneously shows superior antifouling performances of pollutants and filtration efficiency of over 97% PM0.3 removal. More importantly, the antifouling fibrous membrane still presents a stable and efficient filtration efficiency after multiple washes. Its service life in dust filtration environments is approximately 1.7 times longer than that of the substrate membrane. This work may provide a significant reference for the design of antifouling fiber membranes and high-efficiency air filters with long life spans and reusability.

Two-Dimensional Piezoelectric Nanofibrous Webs by Self-Polarized Assembly for High-Performance PM0.3 Filtration

Particulate matter (PM) pollution has posed a serious threat to public health, especially the global spread of infectious diseases. Most existing air filtration materials are still subjected to a compromise between removal efficiency and air permeability on account of their stacking bulk structures. Here, we proposed a self-polarized assembly technique to create two-dimensional piezoelectric nanofibrous webs (PNWs) directly from polymer solutions. The strategy involves droplets deforming into ultrathin liquid films by inertial flow, liquid films evolving into web-like architectures by instantaneous phase inversion, and enhanced dipole alignment by cluster electrostatics. The assembled continuous webs exhibit integrated structural superiorities of nanoscale diameters (∼20 nm) of the internal fibers and through pores (∼100 nm). Combined with the wind-driven electrostatic property derived from the enhanced piezoelectricity, the PNW filter shows high efficiency (99.48%) and low air resistance (34 Pa) against PM0.3 as well as high transparency (84%), superlight weight (0.7 g m-2), and long-term stable service life. This creation of such versatile nanomaterials may offer insight into the design and upgrading of high-performance filters.

Way to a Library of Ti-Series Oxide Nanofiber Sponges that are Highly Stretchable, Compressible, and Bendable

Ti-series oxide ceramics in the form of aerogels, such as TiO2, SrTiO3, BaTiO3, and CaCu3Ti4O12, hold tremendous potential as functional materials owing to their excellent optical, dielectric, and catalytic properties. Unfortunately, these inorganic aerogels are usually brittle and prone to pulverization owing to weak inter-particulate interactions, resulting in restricted application performance and serious health risks. Herein, a novel strategy is reported to synthesize an elastic form of an aerogel-like, highly porous structure, in which activity-switchable Ti-series oxide sols transform from the metastable state to the active state during electrospinning, resulting in condensation and solidification at the whipping stage to obtain curled nanofibers. These curled nanofibers are further entangled when flying in the air to form a physically interlocked, elastic network mimicking the microstructure of high-elasticity hydrogels. This strategy provides a library of Ti-series oxide nanofiber sponges with unprecedented stretchability, compressibility, and bendability, possessing extensive opportunities for greener, safer, and broader applications as integrated or wearable functional devices. As a proof-of-concept demonstration, a new, elastic form of TiO2, composed of both "white" and "black" TiO2 nanofiber sponges, is constructed as spontaneous air-conditioning textiles in smart clothing, buildings, and vehicles, with unique bidirectional regulation of radiative cooling in summer and solar heating in winter.

Building Block Metal Nanocluster-Based Growth in 1D Direction

Metal nanoclusters with precisely modulated structures at the nanoscale give us the opportunity to synthesize and investigate 1D nanomaterials at the atomic level. Herein, it realizes selective 1D growth of building block nanocluster "Au13 Cd2 " into three structurally different nanoclusters: "hand-in-hand" (Au13 Cd2 )2 O, "head-to-head" Au25 , and "shoulder-to-shoulder" Au33 . Detailed studies further reveals the growth mechanism and the growth-related tunable properties. This work provides new hints for the predictable structural transformation of nanoclusters and atomically precise construction of 1D nanomaterials.

Ultrathin, ultralight dual-scale fibrous networks with high-infrared transmittance for high-performance, comfortable and sustainable PM0.3 filter

Highly permeable particulate matter (PM) can carry various bacteria, viruses and toxics and pose a serious threat to public health. Nevertheless, current respirators typically sacrifice their thickness and base weight for high-performance filtration, which inevitably causes wearing discomfort and significant consumption of raw materials. Here, we show a facile yet massive splitting eletrospinning strategy to prepare an ultrathin, ultralight and radiative cooling dual-scale fiber membrane with about 80% infrared transmittance for high-protective, comfortable and sustainable air filter. By tailoring antibacterial surfactant-triggered splitting of charged jets, the dual-scale fibrous filter consisting of continuous nanofibers (44 ± 12 nm) and submicron-fibers (159 ± 32 nm) is formed. It presents ultralow thickness (1.49 μm) and base weight (0.57 g m-2) but superior protective performances (about 99.95% PM0.3 removal, durable antibacterial ability) and wearing comfort of low air resistance, high heat dissipation and moisture permeability. Moreover, the ultralight filter can save over 97% polymers than commercial N95 respirator, enabling itself to be sustainable and economical. This work paves the way for designing advanced and sustainable protective materials.

Adaptive cooling strategy via human hair: High optothermal conversion efficiency of solar radiation into thermal dissipation

Natural species have developed complex nanostructures in a hierarchical pattern to control the absorption, reflection, or transmission of desired solar and infrared wavelengths. This bio-inspired structure is a promising method to manipulating solar energy and thermal management. In particular, human hair is used in this article to highlight the optothermal properties of bio-inspired structures. This study investigated how melanin, an effective solar absorber, and the structural morphology of aligned domains of keratin polymer chains, leading to a significant increase in solar path length, which effectively scatter and absorb solar radiation across the hair structure, as well as enhance thermal ramifications from solar absorption by fitting its radiative wavelength to atmospheric transmittance for high-yield radiative cooling with realistic human body thermal emission.

High-Performance Waterproof, Breathable, and Radiative Cooling Membranes Based on Nanoarchitectured Fiber/Meshworks

Smart membranes with protection and thermal-wet comfort are highly demanded in various fields. Nevertheless, the existing membranes suffer from a tradeoff dilemma of liquid resistance and moisture permeability, as well as poor thermoregulating ability. Herein, a novel strategy, based on the synchronous occurrence of humidity-induced electrospinning and electromeshing, is developed to synthesize a dual-network structured nanofiber/mesh for personal comfort management. Manipulating the ejection, deformation, and phase separation of spinning jets and charged droplets enables the creation of nanofibrous membranes composed of radiative cooling nanofibers and 2D nanostructured meshworks. With a combination of a true-nanoscale fiber (∼70 nm) in 2D meshworks, a small pore size (0.84 μm), and a superhydrophobic surface (151.9°), the smart membranes present high liquid repellency (95.6 kPa), improved breathability (4.05 kg m-2 d-1), and remarkable cooling performance (7.9 °C cooler than commercial cotton fabrics). This strategy opens up a pathway to the design of advanced smart textiles for personal protection.

Two-Dimensional Nanofibrous Networks by Superspreading-Based Phase Inversion for High-Efficiency Separation

Two-dimensional (2D) nanomaterials have been widely applied as building blocks of nanoporous materials for high-precision separations. However, most existing 2D nanomaterials suffer from poor continuity and a lack of interior linking, resulting in deteriorated performance when assembled into macroscopic bulk structures. Here, a unique superspreading-based phase inversion technique is proposed to directly construct 2D nanofibrous networks (NFNs) from a polymer solution. By tailoring capillary behavior, polymer solution droplets evolve into ultrathin liquid films through superspreading; manipulating phase instability, subsequently, enables the liquid film to phase invert into continuous nanostructured networks. The assembled single-layered NFNs possess integrated structural superiorities of 1D nanoscale fiber diameter (∼40 nm) and 2D lateral infinity, exhibiting a weblike nanoarchitecture with extremely small through-pores (∼100 nm). Our NFNs show remarkable performances in air filtration (PM0.3 removal) and water purification (microfiltration level). This creation of such attractive 2D fibrous nanomaterials can pave the way for versatile high-performance separation applications.

Meta-Aerogel Electric Trap Enables Instant and Continuable Pathogen Killing in Face Masks

The tremendous menace of the COVID-19 pandemic has underscored the urgency for antipathogen masks to stop the transmission of airborne infectious diseases. Most prevailing antipathogen masks manifest a slower sterilization rate that lags behind the pathogen momentum traversing the masks, thereby engendering an elevated susceptibility to infection. Here we tailor nanofibrous meta-aerogel electric traps, 3D-assembled from self-knotted carbon nanotube networks in an all rigid nanofibrous skeleton. This superior configuration revolves around the creation of numerous "dielectrophoretic-aerodynamic grippers", which are capable of directional manipulation of microbes toward the region of the lethal intensive electric field. Based on this, we present a disinfection unit comprising a pair of aerogel electrodes that demonstrate a rapid killing rate (>99.99% biocidal efficacy within 0.016 s) and long-term durability (12 h of continuous operation). Additionally, a microbutton lithium cell is employed as a power supply to fabricate an antipathogen face mask with this disinfection unit, which exhibits superior pathogen inactivation efficacy compared to commercial masks. This scalable biocidal protective equipment holds great potential for use in emergency medical services.

Fast and versatile electrostatic disc microprinting for piezoelectric elements

Nanoparticles, films, and patterns are three critical piezoelectric elements with widespread applications in sensing, actuations, catalysis and energy harvesting. High productivity and large-area fabrication of these functional elements is still a significant challenge, let alone the control of their structures and feature sizes on various substrates. Here, we report a fast and versatile electrostatic disc microprinting, enabled by triggering the instability of liquid-air interface of inks. The printing process allows for fabricating lead zirconate titanate free-standing nanoparticles, films, and micro-patterns. The as-fabricated lead zirconate titanate films exhibit a high piezoelectric strain constant of 560 pm V-1, one to two times higher than the state-of-the-art. The multiplexed tip jetting mode and the large layer-by-layer depositing area can translate into depositing speeds up to 109 μm3 s-1, one order of magnitude faster than current techniques. Printing diversified functional materials, ranging from suspensions of dielectric ceramic and metal nanoparticles, to insulating polymers, to solutions of biological molecules, demonstrates the great potential of the electrostatic disc microprinting in electronics, biotechnology and beyond.

"Biomass to Membrane": Sulfonated Kraft Lignin/PCL Superhydrophilic Electrospun Membrane for Gravity-Driven Oil-in-Water Emulsion Separation

Biobased membranes made with green solvents have numerous advantages in the water purification industry; however, their long-term use is impeded by severe membrane fouling and low structural stability. Herein, we proposed a facile and green approach to fabricate an eco-friendly and biodegradable electrospun membrane by simply blending polycaprolactone (PCL) with sulfonated kraft lignin (SKL) in a green solvent (i.e., acetic acid) without needing any additional post-treatment. We investigated the influence of SKL content on the surface morphology, chemical composition, and mechanical properties of the electrospun membrane. The SKL-modified membranes (L-5 and L-10) showed superhydrophilicity and underwater superoleophobicity with a water contact angle (WCA) of 0° (<3 s) and an underwater-oil contact angle (UWOCA) over 150° due to the combined effect of surface roughness and hydrophilic chemical functionality. Furthermore, the as-prepared membranes demonstrated excellent pure water flux of 800-900 LMH and an emulsion flux of 170-480 LMH during the gravity-driven filtration of three surfactant-stabilized oil-in-water emulsions, namely, mineral oil/water, gasoline/water, and n-hexadecane/water emulsions. In addition, these membranes exhibited superior antioil-fouling performance with excellent separation efficiency (97-99%) and a high flux recovery ratio (>98%). The 10 wt % SKL-incorporated membrane (L-10) also showed consistent separation performance after 10 cyclic tests, indicating its excellent reusability and recyclability. Furthermore, the stability of the membrane under harsh pH conditions was also evaluated and proved to be robust enough to maintain its wettability in a wide pH range (pH 1-10).

Highly Efficient, Dual-Functional Self-Assembled Electrospun Nanofiber Filters for Simultaneous PM Removal and On-Site Eye-Readable Formaldehyde Sensing

Air pollution containing particulate matter (PM) and volatile organic compounds has caused magnificent burdens on individual health and global economy. Although advances in highly efficient or multifunctional nanofiber filters have been achieved, many existing filters can only deal with one type of air pollutant, such as capturing PM or absorbing and detecting toxic gas. Here, highly efficient, dual-functional, self-assembled electrospun nanofiber (SAEN) filters were developed for simultaneous PM removal and onsite eye-readable formaldehyde sensing fabricated on a commercial fabric mask. With the use of an electrolyte solution containing a formaldehyde-sensitive colorimetric agent as a collector during electrospinning, the one-step fabrication of the dual-functional SAEN filter on commercial masks, such as a fabric mask and a daily disposable mask, was achieved. The electrolyte solution also allowed the uniform deposition of electrospun nanofibers, thereby achieving the high efficiency of PM filtration with an increased quality factor up to twice that of commercial masks. The SAEN filter enabled onsite and eye-readable formaldehyde gas detection by changing its color from yellow to red under a 5 ppm concentrated formaldehyde gas atmosphere. The repetitive fabrication and detachment of the SAEN filter on a fabric mask minimized the waste of the mask while maintaining high filtration efficiency by replenishing the SAEN filters and reusing the fabric mask. Given the dual functionality of SAEN filters, this process could provide new insights into designing and developing high performance and dual-functional electrospun nanofiber filters for various applications, including individual protection and indoor purification applications.

Graphical Abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s42765-023-00279-3.

Scalable Fabrication of Electrospun True-Nanoscale Fiber Membranes for Effective Selective Separation

Electrospun fibers have received wide attention in various fields ranging from the environment and healthcare to energy. However, nearly all electrospun fibers suffer from a pseudonanoscale diameter, resulting in fabricated membranes with a large pore size and limited separation performance. Herein, we report a novel strategy based on manipulating the equilibrium of stretch deformation and phase separation of electrospun jets to develop true-nanoscale fibers for effective selective separation. The obtained fibers present true-nanoscale diameters (∼67 nm), 1 order of magnitude less than those of common electrospun fibers, which endows the resultant membranes with remarkable nanostructural characteristics and separation performances in areas of protective textiles (waterproofness of 113 kPa and breathability of 4.1 kg m^-2 d^-1), air filtration (efficiency of 99.3% and pressure drop of 127.4 Pa), and water purification (flux of 81.5 kg m^-2 h^-1 and salt rejection of 99.94%). This work may shed light on developing high-performance separation materials for various applications.

P(VDF-TrFE)/BaTiO3 Nanofibrous Membrane with Enhanced Piezoelectricity for High PM0.3 Filtration and Reusable Face Masks

In the background of air pollution and regular COVID-19 prevention, personal protective masks are necessary for our daily life. However, protective masks with high PM_0.3 filtration usually have poor air permeability and are mostly disposable, leading to a heavy burden on the environment. In this work, a reusable membrane based on piezoelectric poly(vinylidene fluoride-trifluoroethylene) [P(VDF-TrFE)] nanofibers embedded with BaTiO₃ nanoparticles (BTO NPs) was developed. The P(VDF-TrFE)/BTO composite nanofibers not only have enhanced piezoelectricity and surface polarity but also have reduced diameters that could be beneficial for electrostatic adhesion, pole-polar interactions, and mechanical sieving to increase the PM_0.3 capture capacity. Moreover, the BTO NPs also improved the charge storage capacity of the composite membrane, which could further enhance the PM_0.3 filtration efficiency after corona treatment. The piezoelectric mask based on P(VDF-TrFE)/BTO composite nanofibers has high filtration efficiencies of 96% for PM_0.3 and 98% for bacteria, while the pressure drop was only 182 Pa, which is lower than the commercial N95 standard of 343.2 Pa. Furthermore, the piezoelectric mask has a long and stable filtration performance after 5 cycles of 75% alcohol disinfection, demonstrating that the P(VDF-TrFE)/BTO composite membrane has a potential application in personal protective masks with comfortable and reusable properties.

Electrospun Nanofibrous Membranes: A Versatile Medium for Waterproof and Breathable Application

Waterproof and breathable membranes that prevent liquid water penetration, while allowing air and moisture transmission, have attracted significant attention for various applications. Electrospun nanofiber materials with adjustable pore structures, easily tunable wettability, and good pore connectivity, have shown significant potential for constructing waterproof and breathable membranes. Herein, a systematic overview of the recent progress in the design, fabrication, and application of waterproof and breathable nanofibrous membranes is provided. The various strategies for fabricating the membranes mainly including one-step electrospinning and post-treatment of nanofibers are given as a starting point for the discussion. The different design concepts and structural characteristics of each type of waterproof and breathable membrane are comprehensively analyzed. Then, some representative applications of the membranes are highlighted, involving personal protection, desalination, medical dressing, and electronics. Finally, the challenges and future perspectives associated with waterproof and breathable nanofibrous membranes are presented.

High Performance Marine and Terrestrial Bioadhesives and the Biomedical Applications They Have Inspired

This study has reviewed the naturally occurring bioadhesives produced in marine and freshwater aqueous environments and in the mucinous exudates of some terrestrial animals which have remarkable properties providing adhesion under difficult environmental conditions. These bioadhesives have inspired the development of medical bioadhesives with impressive properties that provide an effective alternative to suturing surgical wounds improving closure and healing of wounds in technically demanding tissues such as the heart, lung and soft tissues like the brain and intestinal mucosa. The Gecko has developed a dry-adhesive system of exceptional performance and has inspired the development of new generation re-usable tapes applicable to many medical procedures. The silk of spider webs has been equally inspiring to structural engineers and materials scientists and has revealed innovative properties which have led to new generation technologies in photonics, phononics and micro-electronics in the development of wearable biosensors. Man made products designed to emulate the performance of these natural bioadhesive molecules are improving wound closure and healing of problematic lesions such as diabetic foot ulcers which are notoriously painful and have also found application in many other areas in biomedicine. Armed with information on the mechanistic properties of these impressive biomolecules major advances are expected in biomedicine, micro-electronics, photonics, materials science, artificial intelligence and robotics technology.

Air-Conditioned Masks Using Nanofibrous Networks for Daytime Radiative Cooling

Face masks, as effective measures for passive air pollution control, are of fundamental importance, especially with the outbreak of emerging infectious diseases. Most existing masks are dense or thick, resulting in a lack of thermal/humidity comfort level; despite being worn tightly, they show limited PM_0.3/pathogen removal. Here, we use a facile strategy to create air-conditioned masks using heterogeneous nanofibrous networks, based on an electrospinning/netting technique. Manipulation of the phase separation and self-assembly of charged jet/droplets by control of humidity-induced double diffusion and Taylor cone instability allows for the generation of air-conditioned masks consisting of radiative cooling wrinkled nanofibers and 2D nanostructured networks. Our masks show desirable microenvironment with high-efficiency PM_0.3 removal (>99.988%), low air resistance (0.07% of atmospheric pressure), and remarkable radiative cooling capacity (∼2.8 °C temperature and ∼10% humidity drop), making high-performance filtration and temperature/humidity management "always online". This work should make possible the development of high-performance, energy-saving, and scalable fiber textiles for various applications.

Nanofibrous hemostatic materials: Structural design, fabrication methods, and hemostatic mechanisms

Development of rapid and effective hemostatic materials has always been the focus of research in the healthcare field. Nanofibrous materials which recapitulate the delicate nano-topography feature of fibrin fibers produced during natural hemostatic process, offer large length-to-diameter ratio and surface area, tunable porous structure, and precise control in architecture, showing great potential for staunching bleeding. Here we present a comprehensive review of advances in nanofibrous hemostatic materials, focusing on the following three important parts: structural design, fabrication methods, and hemostatic mechanisms. This review begins with an introduction to the physiological hemostatic mechanism and current commercial hemostatic agents. Then, it focuses on recent progress in electrospun nanofibrous hemostatic materials in terms of composition and structure control, surface modification, and in-situ deposition. The article emphasizes the development of three-dimensional (3D) electrospun nanofibrous materials and their emerging evolution for improving hemostatic function. Next, it discusses the fabrication of self-assembling peptide or protein-mimetic peptide nanofibers, co-assembling supramolecular nanofibers, as well as other nanofibrous hemostatic agents. Further, the article highlights the external and intracavitary hemostatic management based on various nanofiber aggregates. In the end, this review concludes with the current challenges and future perspectives of nanofibrous hemostatic materials. STATEMENT OF SIGNIFICANCE: This article reviews recent advances in nanofibrous hemostatic materials including fabrication methods, composition and structural control, performance improvement, and hemostatic mechanisms. A variety of methods including electrospinning, self-assembly, grinding and refining, template synthesis, and chemical vapor deposition, have been developed to prepare nanofibrous materials. These methods provide robustness in control of the nanofiber architecture in the forms of hydrogels, two-dimensional (2D) membranes, 3D sponges, or composites, showing promising potential in the external and intracavitary hemostasis and wound healing applications. This review will be of great interest to the broad readers in the field of hemostatic materials and multifunctional biomaterials.

Bubble Templated Flexible Ceramic Nanofiber Aerogels with Cascaded Resonant Cavities for High-Temperature Noise Absorption

Aviation noise pollution has become a significant public health problem, especially with the endless improvement of flight speed and loading capacity. Existing aviation noise absorbers have fatal defects of large weight, weak high-temperature stability, and difficulty to achieve both good low-frequency (<1000 Hz) and high-frequency (up to 6000 Hz) noise absorption simultaneously. Herein, we report a robust strategy to create flexible ceramic nanofiber aerogels with cascaded resonant cavities by the air bubbles-assisted freeze-casting technology. The stable hinged resonance cavity structures coassembled by flexible ceramic nanofibers, soft montmorillonite nanosheets, and silica sol glue endow the aerogels with temperature-invariant compressibility (from -196 to 1100 °C) and bendability. Moreover, the comprehensive advantages of cascaded resonance cavities and interconnected fibrous networks enable flexible ceramic nanofiber aerogels to have temperature-invariant full-frequency noise absorption performance (noise reduction coefficient up to 0.66 in 63-6300 Hz). The synthesis of this flexible ceramic nanofiber aerogel provides a versatile platform for the design of high-efficiency noise-absorbing material for various fields.

From 1D Nanofibers to 3D Nanofibrous Aerogels: A Marvellous Evolution of Electrospun SiO2 Nanofibers for Emerging Applications

One-dimensional (1D) SiO2 nanofibers (SNFs), one of the most popular inorganic nanomaterials, have aroused widespread attention because of their excellent chemical stability, as well as unique optical and thermal characteristics. Electrospinning is a straightforward and versatile method to prepare 1D SNFs with programmable structures, manageable dimensions, and modifiable properties, which hold great potential in many cutting-edge applications including aerospace, nanodevice, and energy. In this review, substantial advances in the structural design, controllable synthesis, and multifunctional applications of electrospun SNFs are highlighted. We begin with a brief introduction to the fundamental principles, available raw materials, and typical apparatus of electrospun SNFs. We then discuss the strategies for preparing SNFs with diverse structures in detail, especially stressing the newly emerging three-dimensional SiO2 nanofibrous aerogels. We continue with focus on major breakthroughs about brittleness-to-flexibility transition of SNFs and the means to achieve their mechanical reinforcement. In addition, we showcase recent applications enabled by electrospun SNFs, with particular emphasis on physical protection, health care and water treatment. In the end, we summarize this review and provide some perspectives on the future development direction of electrospun SNFs.

Novel Wet Electrospinning Inside a Reactive Pre-Ceramic Gel to Yield Advanced Nanofiber-Reinforced Geopolymer Composites

Electrospinning is a versatile approach to generate nanofibers in situ. Yet, recently, wet electrospinning has been introduced as a more efficient way to deposit isolated fibers inside bulk materials. In wet electrospinning, a liquid bath is adopted, instead of a solid collector, for fiber collection. However, despite several studies focused on wet electrospinning to yield polymer composites, few studies have investigated wet electrospinning to yield ceramic composites. In this paper, we propose a novel in-situ fabrication approach for nanofiber-reinforced ceramic composites based on an enhanced wet-electrospinning method. Our method uses electrospinning to draw polymer nanofibers directly into a reactive pre-ceramic gel, which is later activated to yield advanced nanofiber-reinforced ceramic composites. We demonstrate our method by investigating wet electrospun Polyacrylonitrile and Poly(ethylene oxide) fiber-reinforced geopolymer composites, with fiber weight fractions in the range 0.1–1.0 wt%. Wet electrospinning preserves the amorphous structure of geopolymer while changing the molecular arrangement. Wet electrospinning leads to an increase in both the fraction of mesopores and the overall porosity of geopolymer composites. The indentation modulus is in the range 6.76–8.90 GPa and the fracture toughness is in the range 0.49–0.76 MPam with a clear stiffening and toughening effect observed for Poly(ethylene oxide)-reinforced geopolymer composites. This work demonstrates the viability of wet electrospinning to fabricate multifunctional nanofiber-reinforced composites.

Nanocellulose implantation enriched the pore structure of aerogel for effective particulate matter removal

Particulate matter (PM) pollution poses a serious threat to public health, disposable and degradable filter materials are expected to handle the problem in the future. Here, polyvinyl alcohol (PVA)/borax/cellulose nanofibrils (CNF) aerogels were implanted on a biodegradable corrugated paper to form composite air filters for the first time via freeze-drying the coated composite hydrogels. The low content of CNF and PVA could be cross-linked by borax to form hydrogels, which enhanced its maneuverability for surface implanting on the substrate. More importantly, the addition of CNF greatly enriched the pore structure of aerogels, which provided a structural basis for PM capture. The as-prepared composite air filters exhibited excellent filtration efficiencies of 92 % and 96 % toward PM1.0 and PM3.0, respectively. Moreover, the addition of dimethylol-5,5-dimethylhydantoin endowed the filters with an antibacterial property. This work shows a new possibility for the design of degradable and functional filter materials.

Biopolymeric Nanocarriers for Nutrient Delivery and Crop Biofortification

Driven by the possibility of precise transformational change in nutrient-enrichment technology to meet global food demand, advanced nutrient delivery strategies have emerged to pave the path toward success for nutrient enrichment in edible parts of crops through bioderived nanocarriers with increased productivity. Slow and controlled release of nutrient carrier materials influences the nutrient delivery rate in soil and in the edible parts of crops with a sluggish nutrient delivery to enhance their availability in roots by minimizing nutrient loss. With a limited understanding of the nutrient delivery mechanism in soil and the edible parts of crops, it is envisaged to introduce nutrient-enrichment technology for nutrient delivery that minimizes environmental impact due to its biodegradable nature. This article attempts to analyze the possible role of the cellulose matrix for nutrient release and the role of cellulose nanocomposites and nanofibers. We have proposed a few cellulose derived biofortificant materials as nutrient carriers, such as (1) nanofibers, (2) polymer-nanocellulose-clay composites, (3) silk-fibroin derived nanocarriers, and (4) carboxymethyl cellulose. An effort is undertaken to describe the research need by linking a biopolymer derived nanocarrier for crop growth regulation and experimental nitrogen release analysis. We have finally provided a perspective on cellulose nanofibers (CNFs) for microcage based nutrient loading ability. This article aims to explain why biopolymer derived nutrient carriers are the alternative candidate for alleviating nutrient deficiency challenges which are involved in focusing the nutrient delivery profile of biopolymers and promising biofortification of crops.

Two-Dimensional Hybrid Nanosheet-Based Supercapacitors: From Building Block Architecture, Fiber Assembly, and Fabric Construction to Wearable Applications

Fiber-based supercapacitors (F-SCs) have inspired widespread interest in the fields of wearable technology, energy, and carbon neutralization due to their highly deformable flexibility, fast charging/discharging capability, long-term stability, and energy conservation ability. In this review, we summarize the latest developments for fabricating fibrous electrodes of F-SCs where advanced micro two-dimensional (2D) building blocks (e.g., MXene and graphene) are chemically assembled and constructed into ordered mesofibers and multifunctional macrofabrics. Diverse fundamental principles of 2D hybrid nanosheets with respect to surface controls, pseudocapacitive modifications, and microstructural manipulations, promoting rapid electron transfer and charge conduction, are introduced. Additionally, various spinning methods for assembling and fabricating sophisticated fibers with advanced nano/microstructures, including hierarchical skeletons, anisotropic backbones, surface/entire porous frameworks, and vertical-aligned networks, for boosting ionic kinetic transport/storage are presented. Likewise, the structure-activity relationships between the porous structure and electrochemical performance are clarified. Moreover, multifunctional fabrics in terms of high flexibilities/strengths, superior electrical conductivities, and stabilized operations, which realize large energy density, deformable capability, and robust stability under harsh conditions, are emphasized. In particular, the potential power-supply applications, including flexible electronic devices, self-powered functions, and energy-sensor systems, are highlighted. Finally, a short conclusion and outlook, along with the current challenges and future opportunities of next-generation F-SCs, are proposed.

Direct synthesis of highly stretchable ceramic nanofibrous aerogels via 3D reaction electrospinning

Ceramic aerogels are attractive for many applications due to their ultralow density, high porosity, and multifunctionality but are limited by the typical trade-off relationship between mechanical properties and thermal stability when used in extreme environments. In this work, we design and synthesize ceramic nanofibrous aerogels with three-dimensional (3D) interwoven crimped-nanofibre structures that endow the aerogels with superior mechanical performances and high thermal stability. These ceramic aerogels are synthesized by a direct and facile route, 3D reaction electrospinning. They display robust structural stability with structure-derived mechanical ultra-stretchability up to 100% tensile strain and superior restoring capacity up to 40% tensile strain, 95% bending strain and 60% compressive strain, high thermal stability from −196 to 1400 °C, repeatable stretchability at working temperatures up to 1300 °C, and a low thermal conductivity of 0.0228 W m⁻¹ K⁻¹ in air. This work would enable the innovative design of high-performance ceramic aerogels for various applications.

Ceramic aerogels are generally brittle and often tend to structurally collapse under large external tensile strain. Here the authors synthesize large-scale stretchable ceramic aerogels with interwoven crimped nanofibers by combining electrohydrodynamic method and 3D reaction electrospinning.

2D Polymer Nanonets: Controllable Constructions and Functional Applications

Two-dimensional (2D) polymer nanonets have demonstrated great potential in various application fields due to their integrated advantages of ultrafine diameter, small pore size, high porosity, excellent interconnectivity, and large specific surface area. Here, a comprehensive overview of the controlled constructions of the polymer nanonets derived from electrospinning/netting, direct electronetting, self-assembly of cellulose nanofibers, and nonsolvent-induced phase separation is provided. Then, the widely researched multifunctional applications of polymer nanonets in filtration, sensor, tissue engineering, and electricity are also given. Finally, the challenges and possible directions for further developing the polymer nanonets are also intensively highlighted. This article is protected by copyright. All rights reserved.

Super Pressure-Resistant Superhydrophobic Fabrics with Real Self-Cleaning Performance

Detergents are extensively used for laundry, causing significant negative impacts on water bodies, plants and animals. Superhydrophobic fabrics are promising to reduce detergent consumption but suffer from low pressure resistance. Here, we report super pressure-resistant superhydrophobic fabrics prepared using polysiloxane modified SiO₂ nanoparticles with epoxy groups. The fabrics show real self-cleaning performance, essentially different from the conventional self-cleaning property of solid particles loosely placed on superhydrophobic surfaces. The contaminated fabrics by various stains can be completely cleaned by home machine laundering without using any detergent whereas the traditional superhydrophobic fabrics cannot. This is owing to excellent abrasion and washing durability, low liquid adhesion force, superior pressure-resistance and vapor-resistance of the fabrics, originating from the low surface energy and dense micro-/nanostructure. Moreover, the superhydrophobic fabrics can be scaled up using the conventional fabric finishing line with low cost. The superhydrophobic fabrics will help significantly reduce the global detergent consumption.

•

Superhydrophobic fabrics with real self-cleaning performance are prepared

•

The fabrics show high durability and pressure-resistance, low liquid adhesion force

•

The contaminated fabrics can be cleaned by home machine laundering without detergent

•

The fabrics can be scaled up using the conventional fabric finishing line

Highly Transparent Nanofibrous Membranes Used as Transparent Masks for Efficient PM0.3 Removal

Currently, the quest for highly transparent and flexible fibrous membranes with robust mechanical characteristics, high breathability, and good filtration performance is rapidly rising because of their potential use in the fields of electronics, energy, environment, medical, and health. However, it is still an extremely challenging task to realize transparent fibrous membranes due to serious surface light reflection and internal light scattering. Here, we report the design and development of a simple and effective topological structure to create porous, breathable, and high visible light transmitting fibrous membranes (HLTFMs). The resultant HLTFMs exhibit good optical performance (up to 90% transmittance) and high porosities (>80%). The formation of such useful structure with high light transmittance has been revealed by electric field simulation, and the mechanism of fibrous membrane structure to achieve high light transmittance has been proposed. Moreover, transparent masks have been prepared to evaluate the filtration performance and analyze their feasibility to meet requirement of facial recognition systems. The prepared masks display high transparency (>80%), low pressure drop (<100 Pa) and high filtration efficiency (>90%). Furthermore, the person wearing this mask can be successfully identified by facial recognition systems. Therefore, this work provides an idea for the development of transparent, breathable, and high-performance fibrous membranes.

Synthesis, mechanism and characterization of Urchin-like Ga2O3 microspheres

An effective method without catalyst and template was developed to synthesize a novel micro-/nanostructures of gallium oxide (Ga2O3) for the first time. The urchin-like microspheres with uniformly distributed nanowires were...

Superelastic and Fire-Retardant Nano-/Microfibrous Sponges for High-Efficiency Warmth Retention

Warmth retention equipment for personal cold protection is highly demanded in freezing weather; however, most present warmth retention materials suffer from high thermal conductivity, weak mechanical properties, and strong flammability, resulting in serious security risks. Herein, we report a facile strategy to fabricate nano-/microfibrous sponges with superelasticity, robust flame retardation, and effective warmth retention performance via direct electrospinning. The three-dimensional fluffy sponges with low volume density and high porosity are constructed by accurately regulating the relative humidity; meanwhile, the mechanically robust polyamide-imide nanofibers with high limit oxygen index (LOI) are innovatively introduced to improve the structural stability and flammability of the nano-/microfibrous sponges. Strikingly, the developed nano-/microfibrous sponges exhibit ultralight characteristics (6.9 mg cm^-3), superelasticity (∼0% plastic deformation after 100 compression tests), effective flame retardant with LOI of 26.2%, and good heat preservation ability (thermal conductivity of 24.6 mW m^-1 K^-1). This work may shed light on designing superelastic and flame-retardant warmth retention materials for various applications.

Flexible ceramic nanofibrous sponges with hierarchically entangled graphene networks enable noise absorption

Traffic noise pollution has posed a huge burden to the global economy, ecological environment and human health. However, most present traffic noise reduction materials suffer from a narrow absorbing band, large weight and poor temperature resistance. Here, we demonstrate a facile strategy to create flexible ceramic nanofibrous sponges (FCNSs) with hierarchically entangled graphene networks, which integrate unique hierarchical structures of opened cells, closed-cell walls and entangled networks. Under the precondition of independent of chemical crosslinking, high enhancement in buckling and compression performances of FCNSs is achieved by forming hierarchically entangled structures in all three-dimensional space. Moreover, the FCNSs show enhanced broadband noise absorption performance (noise reduction coefficient of 0.56 in 63-6300 Hz) and lightweight feature (9.3 mg cm^-3), together with robust temperature-invariant stability from -100 to 500 °C. This strategy paves the way for the design of advanced fibrous materials for highly efficient noise absorption.

Waterborne electrospinning of fluorine-free stretchable nanofiber membranes with waterproof and breathable capabilities for protective textiles

HYPOTHESIS

Smart membranes with robust liquid water resistance and water vapor transmission capabilities have attracted growing attentions in personal protective equipment and environmental protection. However, current fluorine-free waterproof and breathable nanofibrous membranes are usually prepared through toxic solvent-based electrospinning, which raises great concerns about their environmental impacts.

EXPERIMENTS

We develop environmentally friendly fluorine-free polyurethane nanofibrous membranes with robust waterproof and breathable performances via waterborne electrospinning without post-coating treatment. The incorporation of the low surface energy long-chain alkyls and polycarbodiimide crosslinker imparts the interconnective porous channels with high hydrophobicity to waterborne fluorine-free polyurethane nanofibrous membranes.

FINDINGS

The waterborne fluorine-free nanofibrous membranes show high water contact angle of 137.1°, robust hydrostatic pressure of 35.9 kPa, desirable water vapor transmission rate of 4885 g m^-2 d^-1, excellent air permeability of 19.9 mm s^-1, good tensile elongation of 372.4%, and remarkable elasticity of 56.9%, thus offering strong potential for protective textiles and leaving no toxic solvent residues. This work could also serve as a guide for the design of green and high-performance fibrous materials used for medical hygiene, wearable electronics, water desalination, and oil/water separation.

Effect of Process Control Parameters on the Filtration Performance of PAN-CTAB Nanofiber/Nanonet Web Combined with Meltblown Nonwoven

Nanofibers have potential applications as filters for particles with diameters <10 μm owing to their large specific surface area, macropores, and controllable geometry or diameter. The filtration efficiency can be increased by creating nanonets (<50 nm) whose diameter is smaller than that of nanofibers. This study investigates the effect of process conditions on the generation of nanonet structures from a polyacrylonitrile (PAN) solution containing cation surfactants; in addition, the filtration performance is analyzed. The applied electrospinning voltage and the electrostatic treatment of meltblown polypropylene (used as a substrate) are the most influential process parameters of nanonet formation. Electrospun polyacrylonitrile-cetylmethylammonium bromide (PAN-CTAB) showed a nanofiber/nanonet structure and improved thermal and mechanical properties compared with those of the electrospun PAN. The pore size distribution and filter efficiency of the PAN nanofiber web and PAN-CTAB nanofiber/nanonet web with meltblown were measured. The resulting PAN-CTAB nanofiber/nanonet air filter showed a high filtration efficiency of 99% and a low pressure drop of 7.7 mmH2O at an air flow rate of 80 L/min. The process control methods for the nanonet structures studied herein provide a new approach for developing functional materials for air-filtration applications.

Multi-bioinspired and Multistructural Integrated Patterned Nanofibrous Surface for Spontaneous and Efficient Fog Collection

Harvesting water from untapped fog is a potential and sustainable solution to freshwater shortages. However, designing high-efficiency fog collectors is still a critical and challenging task. Herein, learning from the unique microstructures and functionalities of the Namib desert beetle, honeycomb, and pitcher plant, we present a multi-bioinspired patterned fog collector with hydrophilic nanofibrous bumps and a hydrophobic slippery substrate for spontaneous and efficient fog collection. Interestingly, hydrophilic nanofibrous bumps display a honeycomb-like cellular grid structure self-assembled from electrospun nanofibers. Notably, the patterned nanofibrous fog collector exhibits superior water-collecting efficiency of 1111 mg cm^-2 h^-1. The hydrophilic nanofibrous bumps increase the effective fog-collecting area, and the hydrophobic slippery substrate promotes quick transport of collected water in the desired direction reducing the secondary water evaporation, finally achieving rapid directional transport of tiny droplets and high-efficiency water collection. This work opens a new avenue to collect water efficiently and provides clues to research on the multi-bioinspired synergistical optimization strategy.

Lizard-Skin-Inspired Nanofibrous Capillary Network Combined with a Slippery Surface for Efficient Fog Collection

Freshwater shortage is a critical global issue that needs to be resolved urgently. Efficient water collection from fog provides a promising and sustainable solution to produce clean drinking water, especially in the desert and arid regions. Nature has long served as our best source of inspiration for designing new structures and developing new materials. Herein, we report a strategy to design a novel Janus fog collector with a hydrophilic lizard-skin-like nanofibrous network upper surface and hydrophobic slippery lower surface using a simple and feasible method of coating and electrospinning. We analyze the forming law of the lizard-skin-like nanofibrous network structure on different substrates using electric field simulation. The resulting copper mesh-based Janus fog collector exhibits superior water-collecting efficiency (907 mg cm^-2 h^-1) and long-term durability, achieving directional transport of tiny droplets and high-efficiency water collection. However, there are few reports on the combination of the lizard-skin-like nanofibrous capillary network and slippery surface for efficient fog collection. Therefore, we believe that this work will open a new avenue to collect water efficiently and also provide clues to research on the lizard-skin-like nanofibrous network structure.

Multistructured Electrospun Nanofibers for Air Filtration: A Review

Air filtration materials (AFMs) have gradually become a research hotspot on account of the increasing attention paid to the global air quality problem. However, most AFMs cannot balance the contradiction between high filtration efficiency and low pressure drop. Electrospinning nanofibers have a large surface area to volume ratio, an adjustable porous structure, and a simple preparation process that make them an appropriate candidate for filtration materials. Therefore, electrospun nanofibers have attracted increased attention in air filtration applications. In this paper, first, the preparation methods of high-performance electrospun air filtration membranes (EAFMs) and the typical surface structures and filtration principles of electrospun fibers for air filtration are reviewed. Second, the research progress of EAFMs with multistructures, including nanoprotrusion, wrinkled, porous, branched, hollow, core-shell, ribbon, beaded, nets structure, and the application of these nanofibers in air filtration are summarized. Finally, challenges with the fabrication of EAFMs, limitations of their use, and trends for future developments are presented.

Self-cleaning and flexible filters based on aminopyridine conjugated microporous polymers nanotubes for bacteria sterilization and efficient PM2.5 capture

The capture and elimination of harmful particulate matter (PM) both in air and water is of great importance for human health and environmental sustainability. Here, we demonstrate a novel strategy for the exploitation of conjugated microporous polymer bearing aminopyridine moiety (A-CMPs) as an advanced filter for bacteria sterilization and efficient PM capture. The A-CMPs network shows a hierarchically porous structure with mechanical robustness and flexibility, which facilitates to filtration especially for PM with different particle sizes. The capture efficiency of A-CMPs aerogels for PM_2.5 and PM₁₀ were respectively up to PM_2.5 ≥ 99.57 ± 0.19% and PM₁₀ ≥ 99.98 ± 0.01% in a long-term durability test and easy to be regenerated. Moreover, the A-CMPAs features excellent superhydrophobicity, which is difficult to saturate with water aerosols in humid air (RH: 89 ± 3%) and in turn shows superior stability and high-performance in terms to capture efficiency. More importantly, the A-CMP monolith exhibits excellent antimicrobial activity and high concentrations of bacterial suspension (e.g., using E. coli as probe bacterial) could be effectively captured and quickly killed during filtration, which endows the A-CMPs additional sterilization performance and thus is of great technological significance with remarkable potentials as a new kind of advanced filter for multifunctional filtration in both air and water.

Hierarchically Structured Nanocellulose-Implanted Air Filters for High-Efficiency Particulate Matter Removal

Fine particulate matter (PM) air pollution has increasingly become a global problem; thus, high-performance air filtration materials are in great demand. Herein, we first prepared a biodegradable hierarchically structured nanocellulose-implanted air filter with a high filtration capacity using a freeze-drying technique. In this hierarchically structured air filter, porous structures of corrugated paper and cellulose nanofibrils (CNFs) were used as a frame and functional fillers, respectively. The self-assembled structure of the CNF fillers could be controlled by changing the freezing temperature, CNF sizes, concentrations, and base weights. Only the CNFs with a smaller size and concentration of 0.05 wt % were able to self-assemble to well-dispersed fibril networks. With constant optimization of conditions, when the base weight went up to only 0.25 g/m², the coverage of the corrugated paper fibers with CNF networks became perfect, and a high efficiency of 94.6% for PM0.3 removal was achieved, while maintaining a relatively low pressure drop of 174.2 Pa. All of the raw materials we used are biodegradable, nonpetroleum-based materials, contributing to sustainable development. We believe that such excellent biodegradable high-performance cellulose-based air filtration materials will provide a new direction for the application of nanocellulose in air filtration.