A general synthesis approach for amorphous noble metal nanosheets

Multifunctional nanozymes: Promising applications in clinical diagnosis and cancer treatment

Cancer remains one of the greatest challenges in modern medicine. Traditional chemotherapy drugs often cause severe side effects, including nausea, vomiting, diarrhea, neurotoxicity, liver damage, and nephrotoxicity. In addition to these adverse effects, high recurrence and metastasis rates following treatment pose significant challenges for clinicians. There is an urgent need for novel therapeutic strategies to improve cancer treatment outcomes. In this context, nanozymes-artificial enzyme mimetics-have attracted considerable attention due to their unique advantages, including potent tumor-killing effects, enhanced biocompatibility, and reduced toxicity. Notably, nanozymes can dynamically monitor tumors through imaging and tracing. The multifunctional nanozyme (MN) is a promising research focus, integrating multiple catalytic activities, signal enhancement, sensing capabilities, and diverse modifications within a single nanozyme system. MNs can selectively target tumor regions, facilitating synergistic effects with other cancer therapies while enabling real-time imaging and tumor tracking. In this review, we first categorize MNs based on their composition and structural characteristics. We then discuss the primary mechanisms by which MNs exert their anticancer effects. Additionally, we review three types of MN biosensors and four MN-based therapeutic approaches applied in cancer treatment. Finally, we highlight the current challenges in MN research and provide an outlook on future developments in this field.

Optimization of Short-Range Order in Amorphous AlOx Nanosheets for Enhanced Methane Oxidation

Heterogeneous catalysts often undergo dynamic evolution during catalysis, forming true active sites. Amorphous materials, due to their inherent structural flexibility, are particularly prone to evolution and self-adaptation under catalytic conditions. Herein, we demonstrate that the short-range order of an Al-O polyhedron in amorphous aluminum oxide nanosheets undergoes a transformation from a mixed AlO6, AlO5, and AlO4 configuration to a randomly connected AlO6 structure during both hydrothermal treatment and direct methane oxidation, confirmed by time-series 27Al solid-state NMR spectroscopy. The resulting structural changes induce nanosheet wrinkling and a 5-fold increase in specific surface area, concomitant with a transition from weak to moderately strong basic sites, enabling the amorphous nanosheets to efficiently activate hydrogen peroxide and generate hydroxyl radicals. When coupled with supported Cu single atoms, the catalysis achieves an exceptional C1 liquid oxygenate production rate of 5202 mmol gCu-1 h-1 with nearly 100% selectivity during methane oxidation.

Ultrathin, 2D PdAg alloy mesoporous nanosheets enriched with nanogaps promote electrocatalytic CO2 reduction to formate

Pd-based catalysts have emerged as a unique class of promising catalysts capable of selectively producing formate near the equilibrium potential during CO2 electroreduction but still suffer from CO poisoning at high overpotentials. Achieving an excellent overall performance, including high formate selectivity, a wide potential window, and high anti-CO-poisoning ability, remains a significant challenge. Herein, we report the surfactant-templated synthesis of ultrathin, two-dimensional (2D) binary PdAg alloy mesoporous nanosheets enriched with nanogaps among interlinked branches with regulated atomic stoichiometry for highly efficient CO2 reduction to formate. These advanced structural features enabled the catalysts to expose abundant active sites, and a proper Ag concentration within the alloy effectively tailored the electronic structure of Pd through electron transfer from Ag to Pd. The synergetic effect resulting from the structural and electronic perspectives greatly contributed to the promotion of electrocatalytic CO2 reduction to formate. As a result, the optimized Pd4Ag1 nanosheets displayed a maximum formate faradaic efficiency of 99.4% at -0.1 V versus reversible hydrogen electrode and exhibited a wide potential window of 400 mV for high formate selectivity (>90%) toward CO2 reduction. Moreover, the detailed electrochemical analyses collectively evidenced that the Pd4Ag1 nanosheets exhibited attenuated CO binding and CO poisoning. This work highlights a promising avenue for the elaborate design and construction of efficient formate-targeted catalysts.

Coupling Amorphization and Compositional Optimization of Ternary Metal Phosphides toward High-Performance Electrocatalytic Hydrogen Production

Amorphous materials, with abundant active sites and unique electronic configurations, have the potential to outperform their crystalline counterparts in high-performance catalysis for clean energy. However, their synthesis and compositional optimization remain underexplored due to the strict conditions required for their formation. Here, we report the synthesis of ternary platinum-nickel-phosphorus (PtNiP) amorphous nanoparticles (ANPs) within milliseconds by flash Joule heating, which features ultrafast cooling that enables the vitrification of metal precursors. Through compositional optimization, the Gibbs free energy of hydrogen adsorption for Pt4Ni4P1 ANPs is optimized at 0.02 eV, an almost ideal value, even surpassing that of the benchmark metallic platinum catalyst. As a result, the PtNiP ANPs exhibited superior activity in electrocatalytic hydrogen evolution in acid electrolyte (η10 ∼ 14 mV, Tafel slope ∼ 18 mV dec-1, and mass activity 5× higher than state-of-the-art Pt/C). Life-cycle assessment and technoeconomic analysis suggest that, compared to existing processes, our approach enables notable reductions in greenhouse gas emission, energy consumption, and production cost for practical electrolyzer catalyst manufacturing.

Phase Engineering of Atomically Dispersed Fe-Doped Amorphous RuOx Nanosheets via Amorphous-Amorphous Transition for Oxygen Activation

Amorphous nanomaterials with identical compositions can possess distinct atomic structures, which significantly influence their performance, underscoring the importance of phase engineering in amorphous nanomaterials. However, the high Gibbs free energy and complex structures associated with their disordered atomic arrangements pose a significant challenge to the phase engineering of amorphous nanomaterials. Herein, we achieved phase engineering of atomically dispersed Fe-doped amorphous RuOx nanosheets (A-Fe1/RuOx NSs) through amorphous-amorphous transition strategies. Specifically, as confirmed by X-ray absorption fine structure measurements, the Fe coordination environment in A-Fe1/RuOx NSs was regulated from FeO4 tetrahedral to FeO6 octahedral, driven by amorphous-amorphous transition, resulting in two distinct Ru-Fe pair configurations of A-Fe1/RuOx NSs: one with a connected tetrahedral FeO4-octahedral RuO6 configuration and the other one with a connected octahedral FeO6-octahedral RuO6 configuration. Density functional theory calculations demonstrated that the structure differences of the Ru-Fe pair efficiently regulated the adsorption mode of the O2 molecules from top adsorption to bridge adsorption on an amorphous surface. Consequently, the A-Fe1/RuOx NSs with a connected tetrahedral FeO4-octahedral RuO6 configuration exhibited an enhanced formation of superoxide radicals during oxidative dehydrogenation reactions, resulting in remarkable catalytic activity in the synthesis of indole, indole derivatives, and quinoline.

Recent progress of noble metal-based nanozymes: structural engineering and biomedical applications

Due to their tunable catalytic activity, high chemical stability, and favorable electronic structure, noble metal-based nanozymes that can mimic important biocatalytic processes have attracted great attention. Rational structural design of noble metal-based nanozymes can endow them with excellent enzyme-like activities, enhanced sensitivity and stability, as well as unique physicochemical functionalities towards various biomedical applications such as sensing, diagnostics, and disease treatment. This review summarizes the recent progress in structural engineering of noble metal-based nanozymes and emphasizes the relationship between key structural factors of nanozymes and their enzyme-like properties in various enzyme-mimicking reactions. The diverse applications of noble metal-based nanozymes in biosensors, antibiosis, and disease treatment are further introduced. Finally, current challenges and future research directions in noble metal-based nanozymes are discussed. This review could offer scientific guidance to design and fabricate advanced nanozymes with enhanced functionality and performance towards clinical, environmental and biomedical applications.

Synergetic Oxidized Mg and Mo Sites on Amorphous Ru Metallene Boost Hydrogen Evolution Electrocatalysis

Ruthenium (Ru) is considered as a promising catalyst for the alkaline hydrogen evolution reaction (HER), yet its weak water adsorption ability hinders the water splitting efficiency. Herein, a concept of introducing the oxygenophilic MgOx and MoOy species onto amorphous Ru metallene is demonstrated through a simple one-pot salt-templating method for the synergic promotion of water adsorption and splitting to greatly enhance the alkaline HER electrocatalysis. The atomically thin MgOx and MoOy species on Ru metallene (MgOx/MoOy-Ru) show a 15.3-fold increase in mass activity for HER at the potential of 100 mV than that of Ru metallene and an ultralow overpotential of 8.5 mV at a current density of 10 mA cm-2. It is further demonstrated that the MgOx/MoOy-Ru-based anion exchange membrane water electrolyzer can achieve a high current density of 100 mA cm-2 at a remarkably low cell voltage of 1.55 V, and exhibit excellent durability of over 60 h at a current density of 500 mA cm-2. In situ spectroscopy and theoretical simulations reveal that the co-introduction of MgOx and MoOy enhances interfacial water adsorption and splitting by promoting adsorption on oxidized Mg sites and lowering the dissociation energy barrier on oxidized Mo sites.

Low-Ir-Content Ir0.10Mn0.90O2 Solid Solution for Highly Active Oxygen Evolution in Acid Media

Iridium (Ir)-based materials are the most widely used oxygen evolution reaction (OER) electrocatalysts in proton exchange membrane water electrolysis (PEMWE). However, their commercial application suffers from high cost and insufficient activity. To optimize the atom utilization efficiency of Ir, the aim is to engineer and develop a rutile-structured solid solution catalyst with minimal Ir content, which is identified through a phase boundary. Here, Ir0.10Mn0.90O2 represents the lowest Ir content in the desired IrO2-MnO2 solid solution. The Ir0.10Mn0.90O2 catalyst exhibits outstanding OER performance in acidic electrolytes, reaching a remarkable mass activity of 1135 A g-1 Ir at an overpotential of 300 mV, which is ≈50 times higher than that of a commercial IrO2 catalyst. Additionally, it demonstrates excellent stability at a current density of 200 mA cm-2 over 120 h during PEMWE operations. Density functional theory (DFT) calculations indicate that the hydroxylation process can be efficiently promoted by the electron-withdrawing on Ir sites in Ir0.10Mn0.90O2, contributing to the enhancement of OER activity.

Tuning Ru-O Coordination for Switching Redox Centers in Acidic Oxygen Evolution Electrocatalysis

Avoiding lattice oxygen involvement (oxygen redox) while promoting the coupling of adjacent adsorbed oxygen (metal redox) during the acidic oxygen evolution reaction (OER) is essential for gaining high activity and robust stability in RuO2-based catalysts but remains elusive. Here, we present a precise strategy to selectively activate the metal redox process while suppressing the undesired oxygen redox pathway by fine-tuning the Ru-O coordination number in amorphous RuOx. The optimized catalyst exhibits outstanding acidic OER performance, achieving a low overpotential of 215 mV at 10 mA cm-2 and maintaining stability for 300 h with a negligible degradation rate of 100 µV h-1. X-ray absorption measurements and multiple operando spectra reveal that only Ru2-O11 moieties can selectively activate the metal redox process, whereas Ru2-O9 and Ru2-O8 moieties either trigger both redox pathways or bypass them. Theoretical calculations reveal that Ru2-O11 moiety reduces crystal field splitting energy at active Ru sites, disables lattice oxygen activation, and lowers the energy barrier for oxygen coupling. The strategy developed in this work offers new avenues for switching redox centers and refining OER mechanisms to enhance catalytic performance and long-term stability.

2D Carbon-Anchored Platinum-Based Nanodot Arrays as Efficient Catalysts for Methanol Oxidation Reaction

Ultrafine Pt-based alloy nanoparticles supported on carbon substrates have attracted significant attention due to their catalytic potential. Nevertheless, ensuring the stability of these nanoparticles remains a critical challenge, impeding their broad application. In this work, novel nanodot arrays (NAs) are introduced where superfine alloy nanoparticles are uniformly implanted in a 2D carbon substrate and securely anchored. Electrochemical testing of the PtCo NAs demonstrates exceptional methanol oxidation reaction (MOR) activity, achieving 1.25 A mg-1. Moreover, the PtCo NAs exhibit outstanding stability throughout the testing period, underscoring the effectiveness of the anchoring mechanism. Comprehensive characterization and theoretical calculations reveal that the 2D carbon-anchored structure optimizes the electronic structure and coordination environment of Pt, restricts nanoparticle migration, and suppresses transition metal dissolution. This strategy represents a major advancement in addressing the stability limitations of ultrafine nanoparticles in catalytic applications and offers broader insights into the design of next-generation catalysts with enhanced durability and performance.

Engineering High-Density Grain Boundaries in Ru0.8Ir0.2Ox Solid-Solution Nanosheets for Efficient and Durable OER Electrocatalysis

The oxygen evolution reaction (OER) in proton exchange membrane water electrolyzers (PEMWE) has long stood as a formidable challenge for green hydrogen sustainable production, hindered by sluggish kinetics, high overpotentials, and poor durability. Here, these barriers are transcended through a novel material design: strategic engineering of high-density grain boundaries within solid-solution Ru0.8Ir0.2Ox ultrathin nanosheets. These carefully tailored grain boundaries and synergistic Ir─Ru interactions, reduce the coordination of Ru atoms and optimize the distribution of charge, thereby enhancing both the catalytic activity and stability of the nanosheets, as verified by merely requiring an overpotential of 189 mV to achieve 10 mA cm-2 in acidic electrolyte. In situ electrochemical techniques, complemented by theoretical calculations, reveal that the OER follows an adsorption evolution mechanism, demonstrating the pivotal role of grain boundary engineering and electronic modulation in accelerating reaction kinetics. Most notably, the Ru0.8Ir0.2Ox exhibits outstanding industrial-scale performance in PEMWE, reaching 4.0 A cm-2 at 2 V and maintaining stability for >1000 h at 500 mA cm-2. This efficiency reduces hydrogen production costs to $0.88 kg-1. This work marks a transformative step forward in designing efficient, durable OER catalysts, offering a promising pathway toward hydrogen production technologies and advancing the global transition to sustainable energy.

p-p Orbital Hybridization Stabilizing Lattice Oxygen in Two-Dimensional Amorphous RuOx for Efficient Acidic Oxygen Evolution

Developing efficient Ru-based catalysts is crucial in reducing reliance on costly Ir for the acidic oxygen evolution reaction (OER). However, these Ru-based catalysts face a fundamental stability challenge due to the highly reactive nature of lattice oxygen. In this work, we propose an effective strategy to stabilize lattice oxygen in 2D amorphous RuOx through p-p orbital hybridization by incorporating dopants such as Al, Ga, and In. Notably, Ga doping exhibits remarkable acidic OER performance, leading to a 137 mV reduction in overpotential at 10 mA cm-2 and a 125-fold improvement in stability compared to undoped RuOx. This also surpasses the performances of most reported Ru-based catalysts. In contrast, doping with other elements from the same period, such as Mn, Co, or Cu, shows negligible improvements in catalytic performance. In situ electrochemical spectroscopic analysis, couples with theoretical calculations, reveals that the p-p orbital hybridization in the Ga-O coordination within Ga-RuOx effectively reduces the reactivity of lattice oxygen, suppresses the overoxidation of Ru, and switches the reaction pathway from the lattice oxygen mechanism to the adsorbate evolution mechanism. This novel p-p orbital hybridization strategy holds great potential for the development of efficient and robust electrocatalysts for OER and beyond.

Fabrication of Multifarious Nanoparticles Inside a TEM: An In Situ Evaporation and Deposition Method

Revealing the surface effect of nanoparticles (NPs) is one of the key prerequisites for understanding their extraordinary properties at the nanometer scale. However, active NPs frequently suffer from surface oxidation and contamination, which hinders the realization of their delicate surface-related properties. Upon this issue, this paper develops an in situ evaporation and deposition (in-E&D) method inside a transmission electron microscope (TEM), by which NPs with ultra-clean surfaces can be controllably fabricated and examined. More than 12 types of materials, including Mg, Al, Cr, Mn, Ni, Cu, Zn, Ge, Ag, Sb, Pb, Bi, etc., have been demonstratively verified, and diverse NPs/nanorods have been obtained with featured structures, shapes, phases, etc. It is found that the electron beam-induced thermal effect and the vapor pressure of the precursor material are two decisive parameters for this in-E&D method. With appropriate settings, NP size, number density, and distribution can be designedly modulated. With alloyed/mixed precursors, the in-E&D method can be extended to fabricate binary and even more complex NPs in demand. It provides an effective chance to uncover the property and behavior of delicate NPs which are sensitive and prone to contamination during sample transfer.

Recent Strategies for Ni3S2-Based Electrocatalysts with Enhanced Hydrogen Evolution Performance: A Tutorial Review

Water electrolysis represents one of the most environmentally friendly methods for hydrogen production, while its overall efficiency is primarily governed by the electrocatalyst. Nickel sulfides, e.g., Ni3S2, are considered to be highly promising catalysts for the hydrogen evolution reaction (HER) due to their distinctive chemical structure. However, the practical application of Ni3S2-based electrocatalysts is hindered by unsatisfactory high overpotential in the HER and weakened catalytic performance under alkaline conditions. Therefore, in this regard, further research on Ni3S2-based catalysts is being carried out to tackle these challenges. This review provides a comprehensive survey of the latest advancements in Ni3S2-based in improving the HER performance of Ni3S2-based electrocatalysts. The review may offer some inspiration for the rational design and synthesis of novel transition metal-based catalysts with enhanced water electrolysis performance.

Synergistic Zn and MoS2 Tailored Co-N/C Environments Enabling Bifunctional ORR/OER Electrocatalysis for Advanced Li-O2 Batteries

To better adapt lithium-oxygen batteries (LOBs) and overcome their sluggish oxygen reduction and evolution reactions (ORR/OER) kinetics, designing efficient bifunctional ORR/OER catalytic materials is essential. In this study, we successfully constructed a bifunctional ZnCo-N/C@MoS2 catalyst by tailoring the Co-N/C center with Zn incorporation and MoS2 encapsulation. Surprisingly, Zn atoms, which are typically considered to promote the Co atoms isolation, exhibit a promoting effect on the ORR performance of Co-N/C centers and enhance their stability under harsh conditions. Introducing MoS2 establishes Mo-N coupling centers, enhancing electron transfer and adjusting the charge density of Co active centers, thereby compensating OER activity limitation of ZnCo-N/C. In Li-O2 batteries, Zn and MoS2 synergistically optimize intermediate interactions and regulate LiO2 formation/decomposition, while Zn's environmental adaptability and MoS2's encapsulating protection jointly enhance operational stability. Results show that ZnCo-N/C@MoS2, serving as the oxygen electrode in Li-O2 batteries, achieves a low overpotential of 1.01 V, an ultra-high specific capacity of 25,026 mAh g-1, and a long cycle life of 298 cycles. This work achieves bifunctionality in single-atom catalysts through precise dual modulation of the catalytic environment, providing a novel strategy for the development of lithium-oxygen batteries.

Recent Development of Ir- and Ru-Based Electrocatalysts for Acidic Oxygen Evolution Reaction

Proton exchange membrane (PEM) water electrolyzers are one type of the most promising technologies for efficient, nonpolluting and sustainable production of high-purity hydrogen. The anode catalysts account for a very large fraction of cost in PEM water electrolyzer and also determine the lifetime of the electrolyzer. To date, Ir- and Ru-based materials are types of promising catalysts for the acidic oxygen evolution reaction (OER), but they still face challenges of high cost or low stability. Hence, exploring low Ir and stable Ru-based electrocatalysts for acidic OER attracts extensive research interest in recent years. Owing to these great research efforts, significant developments have been achieved in this field. In this review, the developments in the field of Ir- and Ru-based electrocatalysts for acidic OER are comprehensively described. The possible OER mechanisms are first presented, followed by the introduction of the criteria for evaluation of the OER electrocatalysts. The development of Ir- and Ru-based OER electrocatalysts are then elucidated according to the strategies utilized to tune the catalytic performances. Lastly, possible future research in this burgeoning field is discussed.

Isolated Metal Centers Activate Small Molecule Electrooxidation: Mechanisms and Applications

Electrochemical oxidation of small molecules shows great promise to substitute oxygen evolution reaction (OER) or hydrogen oxidation reaction (HOR) to enhance reaction kinetics and reduce energy consumption, as well as produce high-valued chemicals or serve as fuels. For these oxidation reactions, high-valence metal sites generated at oxidative potentials are typically considered as active sites to trigger the oxidation process of small molecules. Isolated atom site catalysts (IASCs) have been developed as an ideal system to precisely regulate the oxidation state and coordination environment of single-metal centers, and thus optimize their catalytic property. The isolated metal sites in IASCs inherently possess a positive oxidation state, and can be more readily produce homogeneous high-valence active sites under oxidative potentials than their nanoparticle counterparts. Meanwhile, IASCs merely possess the isolated metal centers but lack ensemble metal sites, which can alter the adsorption configurations of small molecules as compared with nanoparticle counterparts, and thus induce various reaction pathways and mechanisms to change product selectivity. More importantly, the construction of isolated metal centers is discovered to limit metal d-electron back donation to CO 2p* orbital and reduce the overly strong adsorption of CO on ensemble metal sites, which resolve the CO poisoning problems in most small molecules electro-oxidation reactions and thus improve catalytic stability. Based on these advantages of IASCs in the fields of electrochemical oxidation of small molecules, this review summarizes recent developments and advancements in IASCs in small molecules electro-oxidation reactions, focusing on anodic HOR in fuel cells and OER in electrolytic cells as well as their alternative reactions, such as formic acid/methanol/ethanol/glycerol/urea/5-hydroxymethylfurfural (HMF) oxidation reactions as key reactions. The catalytic merits of different oxidation reactions and the decoding of structure-activity relationships are specifically discussed to guide the precise design and structural regulation of IASCs from the perspective of a comprehensive reaction mechanism. Finally, future prospects and challenges are put forward, aiming to motivate more application possibilities for diverse functional IASCs.

Facile Reconstruction of Se-Regulated NiMo Nanorods for Efficient Anion Exchange Membrane Water Electrolysis

Developing platinum group metal (PGM)-free electrodes with high efficiency and stability is the ultimate goal for cost-effective anion exchange membrane water electrolysis (AEMWE), while it poses a significant challenge to PGM-free catalysts. Here, we present reconstructed NiMoSex (r-NiMoSex) nanorods as highly efficient catalysts for the oxygen evolution reaction (OER), in which Se can induce fast structural reconstruction, thereby creating a flexible surface. This approach constructs successive ion channels for mass transfer, thus significantly facilitating the OER performance. Consequently, r-NiMoSex-based PGM-free AEMWE enables an exceptional current density of 3 A cm-2 at 2.05 V, which can be stably run at 1 A cm-2 at 1.70 V for 190 h with a low attenuation rate of 48.1 μV h-1, surpassing most previously reported PGM-free catalysts. More importantly, the r-NiMoSex can maintain stable AEMWE performance after an almost half-year placement. This strategy contributes to developing next-generation highly efficient and durable PGM-free catalysts for green hydrogen production.

Bias-Induced Ga-O-Ir Interface Breaks the Limits of Adsorption-Energy Scaling Relationships for High-Performing Proton Exchange Membrane Electrolyzers

Rationally manipulating the in situ formed catalytically active surface of catalysts remains a significant challenge for achieving highly efficient water electrolysis. Herein, we present a bias-induced activation strategy to modulate in situ Ga leaching and trigger the dynamic surface restructuring of lamellar Ir@Ga2O3 for the electrochemical oxygen evolution reaction. The in situ reconstructed Ga-O-Ir interface sustains high water oxidation rates at oxygen evolution reaction (OER) overpotentials. We found that OER at the Ga-O-Ir interface follows a bi-nuclear adsorbate evolution mechanism with unsaturated IrOx as the active sites, while GaOx atoms play an indirect role in promoting water dissociation to form OH* and transferring OH* to Ir sites. This breaks the scaling relationship of the adsorption energies between OH* and OOH*, significantly lowering the energy barrier of the rate-limiting step and greatly increasing reactivity. The Ir@Ga2O3 catalyst achieves lower overpotentials, a current density of 2 A cm-2 at 1.76 V, and stable operation up to 1 A cm-2 in scalable proton exchange membrane water electrolyzer (PEMWE) at 1.63 V, maintaining stable operation at 1 A cm-2 over 1000 hours with a degradation rate of 11.5 μV h-1. This work prompted us to jointly address substrate-catalyst interactions and catalyst reconstruction, an underexplored path, to improve activity and stability in Ir PEMWE anodes.

Crystalline Structural Engineering of an Electrical Insulator Into A Highly-Active Electrocatalyst for Oxygen Evolution

The development of highly efficient electrocatalysts for oxygen evolution reaction (OER) is crucial for water splitting. Due to flexible lattice structure and tunable electronic properties, perovskite oxides are considered promising candidates for oxygen evolution catalysts. In this work, pulsed laser deposition (PLD) is employed to fabricate well-defined amorphous SrRuO3 (SRO) films (insulator) on a glassy carbon (GC) substrate as the OER catalyst, demonstrating superior OER catalytic activity compare with crystalline SRO. The mechanism is also investigated by which oxygen partial pressure affects the activity of amorphous SRO. Changes in oxygen partial pressure can affect the content of oxygen vacancies and active site valence in amorphous SRO, with these factors working in concert to regulate the OER activity of the films. Furthermore, it is provide evidence that amorphous SRO can trigger a self-adaptive process, which plays a crucial role in electrochemical reaction. This findings suggest that amorphous structure engineering can be an effective and versatile strategy for designing next-generation high-performance catalysts for OER applications.

Self-Triggering a Locally Alkaline Microenvironment of Co4Fe6 for Highly Efficient Neutral Ammonia Electrosynthesis

Electrochemical nitrate reduction reaction (eNO3-RR) to ammonia (NH3) holds great promise for the green treatment of NO3- and ambient NH3 synthesis. Although Fe-based electrocatalysts have emerged as promising alternatives, their excellent eNO3-RR-to-NH3 activity is usually limited to harsh alkaline electrolytes or alloying noble metals with Fe in sustainable neutral electrolytes. Herein, we demonstrate an unusual self-triggering localized alkalinity of the Co4Fe6 electrocatalyst for efficient eNO3-RR-to-NH3 activity in neutral media, which breaks down the conventional pH-dependent kinetics restrictions and shows a 98.6% NH3 Faradaic efficiency (FE) and 99.9% NH3 selectivity at -0.69 V vs RHE. The synergetic Co-Fe dual sites were demonstrated to enable the optimal free energies of eNO3-RR-to-NH3 species and balance water dissociation and protonation of adsorbed NO2-. Notably, the Co4Fe6 electrocatalysts can attain a high current density of 100 mA cm-2 with a high NH3 FE surpassing 96% and long-term stability for over 500 h eNO3-RR-to-NH3 in a membrane electrode assembly (MEA) electrolyzer. This work provides insight into tailoring the self-reinforced local-alkalinity on the Fe-based alloy electrocatalysts for eNO3-RR-to-NH3 and thus avoids alkaline electrolytes and noble metals for practical sustainable nitrate upcycling technology.

Crystallinity of Cerium Oxide Dictates Reactivity of Platinum Catalysts

The reactivity of supported metal catalysts can be influenced by the nature of supports, which synergistically activate reactant molecules with metal sites. The investigation of the crystalline effect of CeO2 remains unclear because of the easy formation of fluorite-structure CeO2. Here, we successfully synthesized CeOx clusters with distinct crystallinity and established that the crystalline nature of CeOx clusters dictates the reactivity of the Pt/CeOx catalysts for CO oxidation. Specifically, Pt clusters supported on crystalline CeOx exhibited a specific CO conversion rate approximately 15-fold higher than those on amorphous CeOx at temperatures of 120 to 140 °C. Detailed experimental investigations and simulations revealed that the enhanced CO oxidation reactivity originates from the higher mobility of lattice oxygen and more labile oxygen species on crystalline CeOx nanoclusters. This work deepens our understanding of crystallinity-dependent redox properties of nanoscale oxide supports and opens new routes for designing better metal catalysts for targeted reactions.

IrPdCuFeNiCoMo Based Core-Shell Icosahedron Nanocrystals and Nanocages for Efficient and Robust Acidic Oxygen Evolution

Facets engineering of high entropy alloy (HEA) nanocrystals might be achieved via shape-controlled synthesis, which is promising but remains challenging in designing Ir-based catalysts towards efficient and robust oxygen evolution reaction (OER) in acidic medium. Herein, icosahedra nanocrystals featured with PdCu core and IrPdCuFeNiCoMo shell were prepared by wet-chemical reduction in one-pot, ascribing to the initial formation PdCu core and subsequent deposition and diffusion of IrPdCuFeNiCoMo HEA shell. Sequential selective chemical etching of PdCu core results in IrPdCuFeNiCoMo HEA nanocages, delivering an overpotential of 235 mV at 10 mA cm-2, 51.0 mV dec-1, and 1624 A gIr -1 at 1.50 V vs reversible hydrogen electrode in a conventional three electrode cell. In a proton exchange membrane water electrolyzer, it delivers a low cell voltage of 1.65 and 1.77 V at a current density of 1.0 and 2.0 A cm-2, respectively, and maintains stable over 900 h at 500 mA cm-2. Theoretical calculations attribute the enhanced intrinsic activity to the broad distribution of the binding energy for OER intermediates on IrPdCuFeNiCoMo HEA, which breaks the linear scaling relationship and accelerates the OER process.

Switchable Acidic Oxygen Evolution Mechanisms on Atomic Skin of Ruthenium Metallene Oxides

RuO2 has been considered as a promising, low-cost, and highly efficient catalyst in the acidic oxygen evolution reaction (OER). However, it suffers from poor stability due to the inevitable involvement of the lattice oxygen mechanism (LOM). Here, we construct a unique metallene-based core-skin structure and unveil that the OER pathway of atomic RuO2 skin can be regulated from the LOM to an adsorbate evolution mechanism by altering the core species from metallene oxides to metallenes. This switch is achieved without sacrificing the number of active sites, enabling Pd@RuO2 metallenes to exhibit outstanding acidic OER activity with a low overpotential of 189 mV at 10 mA cm-2, which is 54 mV lower than that of the counterpart PdO@RuO2 metallenes. Additionally, they also exhibit robust stability with negligible activity decay over 100 h at 50 mA cm-2, outperforming most reported RuO2-based catalysts. Multiple spectroscopic analyses and theoretical calculations demonstrate that the Pd-metallene core, acting as an electron donor, increases the migration energy of subsurface oxygen atoms and optimizes the adsorption energy of intermediates on the active Ru sites, enabling a switch in the reaction mechanism. Such a unique metallene-based core-skin structure offers a novel way for tuning the catalytic behaviors of electrocatalysts.

Advanced Ruthenium-Based Electrocatalysts for NOx Reduction to Ammonia

Ammonia (NH3) is widely recognized as a crucial raw material for nitrogen-based fertilizer production and eco-friendly hydrogen-rich fuels. Currently, the Haber-Bosch process still dominates the worldwide industrial NH3 production, which consumes substantial energy and contributes to enormous CO2 emission. As an alternative NH3 synthesis route, electrocatalytic reduction of NOx species (NO3 -, NO2 -, and NO) to NH3 has gained considerable attention due to its advantages such as flexibility, low power consumption, sustainability, and environmental friendliness. This review timely summarizes an updated and critical survey of mechanism, design, and application of Ru-based electrocatalysts for NOx reduction. First, the reason why the Ru-based catalysts are good choice for NOx reduction to NH3 is presented. Second, the reaction mechanism of NOx over Ru-based materials is succinctly summarized. Third, several typical in situ characterization techniques, theoretical calculations, and kinetics analysis are examined. Subsequently, the construction of each classification of the Ru-based electrocatalysts according to the size of particles and compositions is critically reviewed. Apart from these, examples are given on the applications in the production of valuable chemicals and Zn-NOx batteries. Finally, this review concludes with a summary highlighting the main practical challenges relevant to selectivity and efficiency in the broad range of NOx concentrations and the high currents, as well as the critical perspectives on the fronter of this exciting research area.

Defect Engineering of Metal-Based Atomically Thin Materials for Catalyzing Small-Molecule Conversion Reactions

Recently, metal-based atomically thin materials (M-ATMs) have experienced rapid development due to their large specific surface areas, abundant electrochemically accessible sites, attractive surface chemistry, and strong in-plane chemical bonds. These characteristics make them highly desirable for energy-related conversion reactions. However, the insufficient active sites and slow reaction kinetics leading to unsatisfactory electrocatalytic performance limited their commercial application. To address these issues, defect engineering of M-ATMs has emerged to increase the active sites, modify the electronic structure, and enhance the catalytic reactivity and stability. This review provides a comprehensive summary of defect engineering strategies for M-ATM nanostructures, including vacancy creation, heteroatom doping, amorphous phase/grain boundary generation, and heterointerface construction. Introducing recent advancements in the application of M-ATMs in electrochemical small molecule conversion reactions (e.g., hydrogen, oxygen, carbon dioxide, nitrogen, and sulfur), which can contribute to a circular economy by recycling molecules like H2, O2, CO2, N2, and S. Furthermore, a crucial link between the reconstruction of atomic-level structure and catalytic activity via analyzing the dynamic evolution of M-ATMs during the reaction process is established. The review also outlines the challenges and prospects associated with M-ATM-based catalysts to inspire further research efforts in developing high-performance M-ATMs.

Phase Control in Monometallic and Alloy Nanomaterials

Metal nanomaterials with unconventional phases have been recently developed with a variety of methods and exhibit novel and attractive properties such as high activities for various catalytic reactions and magnetic properties. In this review, we discuss the progress and the trends in strategies for synthesis, crystal structure, and properties of phase-controlled metal nanomaterials in terms of elements and the combination of alloys. We begin with a brief introduction of the anomalous phase behavior derived from the nanosize effect and general crystal structures observed in metal nanomaterials. Then, phase control in monometallic nanomaterials with respect to each element and alloy nanomaterials classified into three types based on their crystal structures is discussed. In the end, all the content introduced in this review is summarized, and challenges for advanced phase control are discussed.

Platinum-Group Metal High-Entropy Selenides for the Hydrogen Evolution Reaction

The selenides of platinum-group metals (PGMs) are emerging as promising catalysts for diverse electrochemical reactions. To date, most studies have focused on single metal or bimetallic systems, whereas the preparation of a high-entropy (HE) selenide consisting of five or more PGM elements holds the promise to further enhance catalytic performance by introducing abundant active sites with various local coordination environments and electronic structures. Herein, we report for the first time the synthesis of PGM-based HE-Selenide (HE-Se) nanoparticles with a unique amorphous structure. The atomic metal-Se coordination and the presence of short-range order were thoroughly revealed. It is further shown that the amorphous HE-Se can be facilely transformed into a single-phase crystalline HE-Se with a cubic structure by thermal annealing. Catalytically, the amorphous HE-Se showed better acidic hydrogen evolution activity over monometallic PGM-based selenides and the crystalline counterpart, demonstrating the advantages of high-entropy configuration and amorphous structure. Our findings may pave the way toward the synthesis and property exploration of amorphous PGM-based selenides with tunable compositions.

Mo Migration-Induced Crystalline to Amorphous Conversion and Formation of RuMo/NiMoO4 Heterogeneous Nanoarray for Hydrazine-Assisted Water Splitting at Large Current Density

Manipulating the atomic structure of the catalyst and tailoring the dissociative water-hydrogen bonding network at the catalyst-electrolyte interface is essential for propelling alkaline hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR), but remains a great challenge. Herein, we constructed an advanced a-RuMo/NiMoO4/NF heterogeneous electrocatalyst with amorphous RuMo alloy nanoclusters anchored to amorphous NiMoO4 skeletons on Ni foam by a heteroatom implantation strategy. Theoretical calculations and in situ Raman tests show that the amorphous and alloying structure of a-RuMo/NiMoO4/NF not only induces the directional evolution of interfacial H2O, but also lowers the d-band center (from -0.43 to -2.22 eV) of a-RuMo/NiMoO4/NF, the Gibbs free energy of hydrogen adsorption (ΔGH*, from -1.29 to -0.06 eV), and the energy barrier of HzOR (ΔGN2(g)=1.50 eV to ΔGN2*=0.47 eV). Profiting from these favorable factors, the a-RuMo/NiMoO4/NF exhibits excellent electrocatalytic performances, especially at large current densities, with an overpotential of 13 and 129 mV to reach 10 and 1000 mA cm-2 for HER. While for HzOR, it needs only -91 and 276 mV to deliver 10 and 500 mA cm-2, respectively. Further, the constructed a-RuMo/NiMoO4/NF||a-RuMo/NiMoO4/NF electrolyzer demands only 7 and 420 mV to afford 10 and 500 mA cm-2.

A Complex Oxide Containing Inherent Peroxide Ions for Catalyzing Oxygen Evolution Reactions in Acid

Proton exchange membrane water electrolyzers powered by sustainable energy represent a cutting-edge technology for renewable hydrogen generation, while slow anodic oxygen evolution reaction (OER) kinetics still remains a formidable obstacle that necessitates basic comprehension for facilitating electrocatalysts' design. Here, we report a low-iridium complex oxide La1.2Sr2.7IrO7.33 with a unique hexagonal structure consisting of isolated Ir(V)O6 octahedra and true peroxide O22- groups as a highly active and stable OER electrocatalyst under acidic conditions. Remarkably, La1.2Sr2.7IrO7.33, containing 59 wt % less iridium relative to the benchmark IrO2, shows about an order of magnitude higher mass activity, 6-folds higher intrinsic activity than the latter, and also surpasses the state-of-the-art Ir-based oxides ever reported. Combined electrochemical, spectroscopic, and density functional theory investigations reveal that La1.2Sr2.7IrO7.33 follows the peroxide-ion participation mechanism under the OER condition, where the inherent peroxide ions with accessible nonbonded oxygen states are responsible for the high OER activity. This discovery offers an innovative strategy for designing advanced catalysts for various catalytic applications.

Thermal Management Approach to Stabilization of Disordered Active Sites for Sabatier Reaction

The transition metal nanocatalysts containing disordered active sites can potentially achieve efficient Sabatier reactions with high selectivity. However, it remains a challenge to maintain the stability of these active sites in such an exothermic reaction. Here, a thermal management approach is reported to address this challenge. Specifically, an efficient and stable catalytic system is developed by integrating urchin-like Ru nanoparticles with disordered active sites (d-RuNUs) and multi-walled carbon nanotubes (MWCNTs) as heat transfer framework, which achieves a CH4 yield of 3.3 mol g-1 h-1 with nearly 100% selectivity in 12 h. The characterizations reveal that the thermal-induced crystallization seriously weakens the adsorption of CO2, leading to significant degradation of catalytic performance. The heat transfer simulation confirms that the MWCNTs with high thermal conductivity play a key role in rapidly redistributing the reaction heat, thereby preventing the crystallization of disordered structures. This work elucidates the deactivation mechanism of disordered active sites in exothermic reactions and opens the avenue for local thermal management of non-thermal equilibrium reactions.

Functional partitioning synergistically enhances multi-scenario nitrate reduction

The promising electrocatalytic nitrate reduction reaction (eNitRR) for distributed ammonia synthesis requires the fine design of functionally compartmentalised and synergistically complementary integrated catalysts to meet the needs of low-cost and efficient ammonia synthesis. Herein, the partitionable CoP3 and Cu3P modules were built on the copper foam substrate, and the functional differentiation promoted the catalytic performance of the surface accordion-like CoP3/Cu3P@CF for eNitRR in complex water environment. Where the ammonia yield rate is as high as 23988.2 μg h-1 cm-2, and the Faradaic efficiency is close to 100 %. With CoP3/Cu3P@CF as the core, the assembled high-performance Zn-nitrate flow battery can realize the dual function of ammonia production and power supply, and can also realize the continuous production of ammonia with high selectivity driven by solar energy. The ammonia recovery reaches 753.9 mg L-1, which shows the superiority of CoP3/Cu3P@CF in multiple application scenarios and provides important experience for the vigorous development of eNitRR. Density functional theory calculation reveal that CoP3 and Cu3P sites play a relay synergistic role in eNitRR catalyzed by CoP3/Cu3P@CF. CoP3 first promotes the activation of NO3- to *NO3H, and then continuously provides proton hydrogen for the eNitRR on the surface of Cu3P, which relays the synergistic catalytic effect to promote the efficient conversion of NO3- to NH3. This study not only develops a catalyst that can promote the efficient reduction of NO3- to ammonia through an easy-to-obtain innovative strategy, but also provides an alternative strategy for the development of eNitRR that is suitable for multiple scenarios and meets the production conditions.

Boron-Intercalation Engineering toward Defected 1T Phase-Rich MoBxS2-x-Supported IrOx Clusters for Acidic OER

The construction of supported Ir-based catalysts can effectively reduce the amount of Ir and generate a synergistic effect that enhances the oxygen evolution reaction (OER) activity and stability, making it one of the effective solutions for optimizing acidic OER catalysts. However, most reported metal oxide supports suffer from poor acid resistance and low electrical conductivity, which are critical for the OER process. Herein, we synthesized a nanosheet-like defected 1T phase-rich MoBxS2-x via a molten salt calcination process, during which the 1T phase was formed, and B was intercalated into MoS2 to protect the 1T phase structure during annealing procedure. After the wet refluxing process, IrOx clusters were uniformly deposited on the surface of MoBxS2-x to form IrOx@MoBxS2-x, which exhibited an overpotential of 168 mV at a current density of 10 mA cm-2 with an Ir loading amount of 25.8 wt %. By comparing the OER performance of IrOx@MoBxS2-x, IrOx@MoS2(Calcinated), and IrOx@MoS2, it is demonstrated that calcination and B intercalation of MoS2 can significantly increase acidic OER performance. This work digs into the application of 1T-MoS2 as an OER catalyst support, providing strategies for the phase and morphology control of 1T-MoS2.

Molten Salt-Assisted Synthesis of Catalysts for Energy Conversion

A breakthrough in manufacturing procedures often enables people to obtain the desired functional materials. For the field of energy conversion, designing and constructing catalysts with high cost-effectiveness is urgently needed for commercial requirements. Herein, the molten salt-assisted synthesis (MSAS) strategy is emphasized, which combines the advantages of traditional solid and liquid phase synthesis of catalysts. It not only provides sufficient kinetic accessibility, but effectively controls the size, morphology, and crystal plane features of the product, thus possessing promising application prospects. Specifically, the selection and role of the molten salt system, as well as the mechanism of molten salt assistance are analyzed in depth. Then, the creation of the catalyst by the MSAS and the electrochemical energy conversion related application are introduced in detail. Finally, the key problems and countermeasures faced in breakthroughs are discussed and look forward to the future. Undoubtedly, this systematical review and insights here will promote the comprehensive understanding of the MSAS and further stimulate the generation of new and high efficiency catalysts.

Non-Noble-Metal-Based Electrocatalysts for Acidic Oxygen Evolution Reaction: Recent Progress, Challenges, and Perspectives

The oxygen evolution reaction (OER) plays a pivotal role in diverse renewable energy storage and conversion technologies, including water electrolysis, electrochemical CO2 reduction, nitrogen fixation, and metal-air batteries. Among various water electrolysis techniques, proton exchange membrane (PEM)-based water electrolysis devices offer numerous advantages, including high current densities, exceptional chemical stability, excellent proton conductivity, and high-purity H2. Nevertheless, the prohibitive cost associated with Ir/Ru-based OER electrocatalysts poses a significant barrier to the broad-scale application of PEM-based water splitting. Consequently, it is crucial to advance the development of non-noble metal OER catalysis substance with high acid-activity and stability, thereby fostering their widespread integration into PEM water electrolyzers (PEMWEs). In this review, a comprehensive analysis of the acidic OER mechanism, encompassing the adsorbate evolution mechanism (AEM), lattice oxygen mechanism (LOM) and oxide path mechanism (OPM) is offered. Subsequently, a systematic summary of recently reported noble-metal-free catalysts including transition metal-based, carbon-based and other types of catalysts is provided. Additionally, a comprehensive compilation of in situ/operando characterization techniques is provided, serving as invaluable tools for furnishing experimental evidence to comprehend the catalytic mechanism. Finally, the present challenges and future research directions concerning precious-metal-free acidic OER are comprehensively summarized and discussed in this review.

Regulating Co-O covalency to manipulate mechanistic transformation for enhancing activity/durability in acidic water oxidation

Developing earth-abundant electrocatalysts with high activity and durability for acidic oxygen evolution reaction is essential for H2 production, yet it remains greatly challenging. Here, guided by theoretical calculations, the challenge of overcoming the balance between catalytic activity and dynamic durability for acidic OER in Co3O4 was effectively addressed via the preferential substitution of Ru for the Co2+ (Td) site of Co3O4. In situ characterization and DFT calculations show that the enhanced Co-O covalency after the introduction of Ru SAs facilitates the generation of OH* species and mitigates the unstable structure transformation via direct O-O coupling. The designed Ru SAs-CoO x catalyst (5.16 wt% Ru) exhibits enhanced OER activity (188 mV overpotential at 10 mA cm-2) and durability, outperforming most reported Co3O4-based and Ru-based electrocatalysts in acidic media.

Optimal Electrocatalyst Design Strategies for Acidic Oxygen Evolution

Hydrogen, a clean resource with high energy density, is one of the most promising alternatives to fossil. Proton exchange membrane water electrolyzers are beneficial for hydrogen production because of their high current density, facile operation, and high gas purity. However, the large-scale application of electrochemical water splitting to acidic electrolytes is severely limited by the sluggish kinetics of the anodic reaction and the inadequate development of corrosion- and highly oxidation-resistant anode catalysts. Therefore, anode catalysts with excellent performance and long-term durability must be developed for anodic oxygen evolution reactions (OER) in acidic media. This review comprehensively outlines three commonly employed strategies, namely, defect, phase, and structure engineering, to address the challenges within the acidic OER, while also identifying their existing limitations. Accordingly, the correlation between material design strategies and catalytic performance is discussed in terms of their contribution to high activity and long-term stability. In addition, various nanostructures that can effectively enhance the catalyst performance at the mesoscale are summarized from the perspective of engineering technology, thus providing suitable strategies for catalyst design that satisfy industrial requirements. Finally, the challenges and future outlook in the area of acidic OER are presented.

Recent advances in biomaterials based near-infrared mild photothermal therapy for biomedical application: A review

Mild photothermal therapy (MPTT) generates heat therapeutic effect at the temperature below 45 °C under near-infrared (NIR) irradiation, which has the advantages of controllable treatment efficacy, lower hyperthermia temperatures, reduced dosage, and minimized damage to surrounding tissues. Despite significant progress has been achieved in MPTT, it remains primarily in the stage of basic and clinical research and has not yet seen widespread clinical adoption. Herein, a comprehensive overview of the recent NIR MPTT development was provided, aiming to emphasize the mechanism and obstacles, summarize the used photothermal agents, and introduce various biomedical applications such as anti-tumor, wound healing, and vascular disease treatment. The challenges of MPTT were proposed with potential solutions, and the future development direction in MPTT was outlooked to enhance the prospects for clinical translation.

Recent Research on Iridium-Based Electrocatalysts for Acidic Oxygen Evolution Reaction from the Origin of Reaction Mechanism

As the anode reaction of proton exchange membrane water electrolysis (PEMWE), the acidic oxygen evolution reaction (OER) is one of the main obstacles to the practical application of PEMWE due to its sluggish four-electron transfer process. The development of high-performance acidic OER electrocatalysts has become the key to improving the reaction kinetics. To date, although various excellent acidic OER electrocatalysts have been widely researched, Ir-based nanomaterials are still state-of-the-art electrocatalysts. Hence, a comprehensive and in-depth understanding of the reaction mechanism of Ir-based electrocatalysts is crucial for the precise optimization of catalytic performance. In this review, the origin and nature of the conventional adsorbate evolution mechanism (AEM) and the derived volcanic relationship on Ir-based electrocatalysts for acidic OER processes are summarized and some optimization strategies for Ir-based electrocatalysts based on the AEM are introduced. To further investigate the development strategy of high-performance Ir-based electrocatalysts, several unconventional OER mechanisms including dual-site mechanism and lattice oxygen mediated mechanism, and their applications are introduced in detail. Thereafter, the active species on Ir-based electrocatalysts at acidic OER are summarized and classified into surface Ir species and O species. Finally, the future development direction and prospect of Ir-based electrocatalysts for acidic OER are put forward.

Glutathione-mediated copper sulfide nanoplatforms with morphological and vacancy-dependent photothermal catalytic activity for multi-model tannic acid assays

Interface engineering and vacancy engineering play an important role in the surface and electronic structure of nanomaterials. The combination of the two provides a feasible way for the development of efficient photocatalytic materials. Here, we use glutathione (GSH) as a coordination molecule to design a series of CuxS nanomaterials (CuxS-GSH) rich in sulfur vacancies using a simple ultrasonic-assisted method. Interface engineering can induce amorphous structure in the crystal while controlling the formation of porous surfaces of nanomaterials, and the formation of a large number of random orientation bonds further increases the concentration of sulfur vacancies in the crystal structure. This study shows that interface engineering and vacancy engineering can enhance the light absorption ability of CuxS-GSH nanomaterials from the visible to the near-infrared region, improve the efficiency of charge transfer between CuxS groups, and promote the separation and transfer of optoelectronic electron-hole pairs. In addition, a higher specific surface area can produce a large number of active sites, and the synergistic and efficient photothermal conversion efficiency (58.01%) can jointly promote the better photocatalytic performance of CuxS-GSH nanomaterials. Based on the excellent hot carrier generation and photothermal conversion performance of CuxS-GSH under illumination, it exhibits an excellent ability to mediate the production of reactive oxygen species (ROS) through peroxide cleavage and has excellent peroxidase activity. Therefore, CuxS-GSH has been successfully developed as a nanoenzyme platform for detecting tannic acid (TA) content in tea, and convenient and rapid detection of tannic acid is achieved through the construction of a multi-model strategy. This work not only provides a new way to enhance the enzyme-like activity of nanomaterials but also provides a new prospect for the application of interface engineering and vacancy engineering in the field of photochemistry.

Half-metallization Atom-Fingerprints Achieved at Ultrafast Oxygen-Evaporated Pyrochlores for Acidic Water Oxidation

The stability and catalytic activity of acidic oxygen evolution reaction (OER) are strongly determined by the coordination states and spatial symmetry among metal sites at catalysts. Herein, an ultrafast oxygen evaporation technology to rapidly soften the intrinsic covalent bonds using ultrahigh electrical pulses is suggested, in which prospective charged excited states at this extreme avalanche condition can generate a strong electron-phonon coupling to rapidly evaporate some coordinated oxygen (O) atoms, finally leading to a controllable half-metallization feature. Simultaneously, the relative metal (M) site arrays can be orderly locked to delineate some intriguing atom-fingerprints at pyrochlore catalysts, where the coexistence of metallic bonds (M─M) and covalent bonds (M─O) at this symmetry-breaking configuration can partially restrain crystal field effect to generate a particular high-spin occupied state. This half-metallization catalyst can effectively optimize the spin-related reaction kinetics in acidic OER, giving rise to 10.3 times (at 188 mV overpotential) reactive activity than pristine pyrochlores. This work provides a new understanding of half-metallization atom-fingerprints at catalyst surfaces to accelerate acidic water oxidation.

Structurally disordered MoSe2 with rich 1T phase as a universal platform for enhanced photocatalytic hydrogen production

The improvement of surface reactivity in noble-metal-free cocatalysts is crucial for the development of efficient and cost-effective photocatalytic systems. However, the influence of crystallinity on catalytic efficacy has received limited attention. Herein, we report the utilization of structurally disordered MoSe2 with abundant 1T phase as a versatile cocatalyst for photocatalytic hydrogen evolution. Using MoSe2/carbon nitride (CN) hybrids as a case study, it is demonstrated that amorphous MoSe2 significantly enhances the hydrogen evolution rate of CN, achieving up to 11.37 μmol h-1, surpassing both low crystallinity (8.24 μmol h-1) and high crystallinity MoSe2 (3.86 μmol h-1). Experimental analysis indicates that the disordered structure of amorphous MoSe2, characterized by coordination-unsaturated surface sites and a rich 1T phase with abundant active sites at the basal plane, predominantly facilitates the conversion of surface-bound protons to hydrogen. Conversely, the heightened charge transfer capacity of the highly crystalline counterpart plays a minor role in enhancing practical catalytic performance. This approach is applicable for enhancing the photocatalytic hydrogen evolution performance of various semiconducting photocatalysts, including CdS, TiO2, and ZnIn2S4, thereby offering novel insights into the advancement of high-performance non-precious catalysts through phase engineering.

Amorphous MnRuOx Containing Microcrystalline for Enhanced Acidic Oxygen-Evolution Activity and Stability

Compared to Ir, Ru-based catalysts often exhibited higher activity but suffered significant and rapid activity loss during the challenging oxygen evolution reaction (OER) in a corrosive acidic environment. Herein, we developed a hybrid MnRuOx catalyst in which the RuO2 microcrystalline regions serve as a supporting framework, and the amorphous MnRuOx phase fills the microcrystalline interstices. In particular, the MnRuOx-300 catalyst from an annealing temperature of 300 °C contains an optimal amorphous/crystalline heterostructure, providing substantial defects and active sites, facilitating efficient adsorption and conversion of OH-. In addition, the heterostructure leads to a relative increase of the d-band center close to the Fermin level, thus accelerating electron transfer with reduced charge transfer resistance at the active interface between crystalline and amorphous phases during the OER. The catalyst was further thoroughly evaluated under various operating conditions and demonstrated exceptional activity and stability for the OER, representing a promising solution to replace Ir in water electrolyzers.

Acidic Oxygen Evolution Reaction: Fundamental Understanding and Electrocatalysts Design

Water electrolysis driven by "green electricity" is an ideal technology to realize energy conversion and store renewable energy into hydrogen. With the development of proton exchange membrane (PEM), water electrolysis in acidic media suitable for many situations with an outstanding advantage of high gas purity has attracted significant attention. Compared with hydrogen evolution reaction (HER) in water electrolysis, oxygen evolution reaction (OER) is a kinetic sluggish process that needs a higher overpotential. Especially in acidic media, OER process poses higher requirements for the electrocatalysts, such as high efficiency, high stability and low costs. This review focuses on the acidic OER electrocatalysis, reaction mechanisms, and critical parameters used to evaluate performance. Especially the modification strategies applied in the design and construction of new-type electrocatalysts are also summarized. The characteristics of traditional noble metal-based electrocatalysts and the noble metal-free electrocatalysts developed in recent decades are compared and discussed. Finally, the current challenges for the most promising acidic OER electrocatalysts are presented, together with a perspective for future water electrolysis.

Symmetry Evolution Induced 2D Pt Single Atom Catalyst with High Density for Alkaline Hydrogen Oxidation

The performance of single-atom catalysts is greatly influenced by the chemical environment surrounding the central atom. Here, a salt-assisted method is employed to transform the tetrahedral coordination structure of zeolitic imidazolate frameworks - 8 (ZIF-8) into a planar square coordination structure without altering the ligands. During the subsequent carbonization process, concurrent with the evaporation of zinc atoms, the structure of the nitrogen and carbon carriers (NC carriers) undergoes a transition from five-membered rings to six-membered rings to preserve the 2D structure. This transition results in the generation of additional defect sites on the 2D-NC substrates. Hence, the Pt single-atom catalysts with planar square coordination symmetries can be precisely prepared via electrodeposition (denoted as 2D-Pt SAC). The Pt loading of 2D-Pt SAC is 0.49 ± 0.03 µg cm-2, higher than that of 3D-Pt SAC (0.37 ± 0.04 µg cm-2). In the context of the hydrogen oxidation reaction electrocatalysis, under an overpotential of 50 mV, these single-atom catalysts with 2D coordination exhibit mass activities of 2396 A gPt -1 (32 times higher than commercial Pt/C catalyst, 2 times higher than 3D-PtNC).

Spin Effect to Regulate the Electronic Structure of Ir─Fe Aerogels for Efficient Acidic Water Oxidation

"Spin" has been recently reported as an important degree of electronic freedom to promote catalysis, yet how it influences electronic structure remains unexplored. This work reports the spin-induced orbital hybridization in Ir─Fe bimetallic aerogels, where the electronic structure of Ir sites is effectively regulated by tuning the spin property of Fe atoms. The spin-optimized electronic structure boosts oxygen evolution reaction (OER) electrocatalysis in acidic media, resulting in a largely improved catalytic performance with an overpotential of as low as 236 mV at 10 mA cm-2. Furthermore, the gelation kinetics for the aerogel synthesis is improved by an order of magnitude based on the introduction of a magnetic field. Density functional theory calculation reveals that the increased magnetic moment of Fe (3d orbital) changes the d-band structure (i.e., the d-band center and bandwidth) of Ir (5d orbital) via orbital hybridization, resulting in optimized binding of reaction intermediates. This strategy builds the bridge between the electron spin theory with the d-band theory and provides a new way for the design of high-performance electrocatalysts by using spin-induced orbital interaction.

Universal Synthesis of Amorphous Metal Oxide Nanomeshes

Constructing the pore structures in amorphous metal oxide nanosheets can enhance their electrocatalytic performance by efficiently increasing specific surface areas and facilitating mass transport in electrocatalysis. However, the accurate synthesis for porous amorphous metal oxide nanosheets remains a challenge. Herein, a facile nitrate-assisted oxidation strategy is reported for synthesizing amorphous mesoporous iridium oxide nanomeshes (a-m IrOx NMs) with a pore size of ∼4 nm. X-ray absorption characterizations indicate that a-m IrOx NMs possess stretched Ir─O bonds and weaker Ir-O interaction compared with commercial IrO2. Combining thermogravimetric-fourier transform infrared spectroscopy with differential scanning calorimetry measurements, it is demonstrated that sodium nitrate, acting as an oxidizing agent, is conducive to the formation of amorphous nanosheets, while the NO2 produced by the in situ decomposition of nitrates facilitates the generation of pores within the nanomeshes. As an anode electrocatalyst in proton exchange membrane water electrolyzer, a-m IrOx NMs exhibit superior performance, maintaining a cell voltage of 1.67 V at 1 A cm-2 for 120 h without obvious decay with a low loading (0.4 mgcatalyst cm-2). Furthermore, the nitrate-assisted method is demonstrated to be a general approach to prepare various amorphous metal oxide nanomeshes, including amorphous RhOx, TiOx, ZrOx, AlOx, and HfOx nanomeshes.

Advances in Noble Metal Electrocatalysts for Acidic Oxygen Evolution Reaction: Construction of Under-Coordinated Active Sites

Renewable energy-driven proton exchange membrane water electrolyzer (PEMWE) attracts widespread attention as a zero-emission and sustainable technology. Oxygen evolution reaction (OER) catalysts with sluggish OER kinetics and rapid deactivation are major obstacles to the widespread commercialization of PEMWE. To date, although various advanced electrocatalysts have been reported to enhance acidic OER performance, Ru/Ir-based nanomaterials remain the most promising catalysts for PEMWE applications. Therefore, there is an urgent need to develop efficient, stable, and cost-effective Ru/Ir catalysts. Since the structure-performance relationship is one of the most important tools for studying the reaction mechanism and constructing the optimal catalytic system. In this review, the recent research progress from the construction of unsaturated sites to gain a deeper understanding of the reaction and deactivation mechanism of catalysts is summarized. First, a general understanding of OER reaction mechanism, catalyst dissolution mechanism, and active site structure is provided. Then, advances in the design and synthesis of advanced acidic OER catalysts are reviewed in terms of the classification of unsaturated active site design, i.e., alloy, core-shell, single-atom, and framework structures. Finally, challenges and perspectives are presented for the future development of OER catalysts and renewable energy technologies for hydrogen production.

Recent advances of doping strategy for boosting the electrocatalytic performance of two-dimensional noble metal nanosheets

Benefiting from the ultrahigh specific surface areas, massive exposed surface atoms, and highly tunable microstructures, the two-dimensional (2D) noble metal nanosheets (NSs) have presented promising performance for various electrocatalytic reactions. Nevertheless, the heteroatom doping strategy, and in particular, the electronic structure tuning mechanisms of the 2D noble metal catalysts (NMCs) yet remain ambiguous. Herein, we first review several effective strategies for modulating the electrocatalytic performance of 2D NMCs. Then, the electronic tuning effect of hetero-dopants for boosting the electrocatalytic properties of 2D NMCs is systematically discussed. Finally, we put forward current challenges in the field of 2D NMCs, and propose possible solutions, particularly from the perspective of the evolution of electron microscopy. This review attempts to establish an intrinsic correlation between the electronic structures and the catalytic properties, so as to provide a guideline for designing high-performance electrocatalysts.

Transforming Plain LaMnO3 Perovskite into a Powerful Ozonation Catalyst: Elucidating the Mechanisms of Simultaneous A and B Sites Modulation for Enhanced Toluene Degradation

Herein, we propose preferential dissolution paired with Cu-doping as an effective method for synergistically modulating the A- and B-sites of LaMnO3 perovskite. Through Cu-doping into the B-sites of LaMnO3, specifically modifying the B-sites, the double perovskite La2CuMnO6 was created. Subsequently, partial La from the A-sites of La2CuMnO6 was etched using HNO3, forming novel La2CuMnO6/MnO2 (LCMO/MnO2) catalysts. The optimized catalyst, featuring an ideal Mn:Cu ratio of 4.5:1 (LCMO/MnO2-4.5), exhibited exceptional catalytic ozonation performance. It achieved approximately 90% toluene degradation with 56% selectivity toward CO2, even under ambient temperature (35 °C) and a relatively humid environment (45%). Modulation of A-sites induced the elongation of Mn-O bonds and decrease in the coordination number of Mn-O (from 6 to 4.3) in LCMO/MnO2-4.5, resulting in the creation of abundant multivalent Mn and oxygen vacancies. Doping Cu into B-sites led to the preferential chemisorption of toluene on multivalent Cu (Cu(I)/Cu(II)), consistent with theoretical predictions. Effective electronic supplementary interactions enabled the cycling of multiple oxidation states of Mn for ozone decomposition, facilitating the production of reactive oxygen species and the regeneration of oxygen vacancies. This study establishes high-performance perovskites for the synergistic regulation of O3 and toluene, contributing to cleaner and safer industrial activities.