Barrier-free reverse-intersystem crossing in organic molecules by strong light-matter coupling

Room-Temperature Inversion of Phosphorescence and Fluorescence Emission Triggered in Twisted Dimeric Structures Displaying Excitonic Coupling

We here report the design of new thermally activated delayed fluorescence (TADF) emitters based on a dimeric binaphthalimide structure, which induces a small singlet-triplet energy gap. The impact of dimerization and the resulting intramolecular exciton effect are highlighted through comparisons with monomeric variants. Additionally, we studied the influence of the acceptor strength, alongside global electronic effects-such as exciton coupling and charge resonance-induced by the donor/acceptor/acceptor/donor (DAAD) configurations. These effects led to the energetic merging, and even inversion, of the phosphorescence and fluorescence spectra in semi-rigid matrices, including room-temperature polymethyl methacrylate (PMMA) thin films, compromising the TADF response initially enhanced in fluidic environments.

In Situ Confinement Strategy To Achieve High-Stability Room Temperature Phosphorescent Carbon Dots

Room temperature phosphorescent (RTP) materials show great application potential in fields such as anticounterfeiting, data encryption, sensors, and bioimaging. However, RTP is prone to being quenched by the influence of oxygen atoms due to the particularity of its luminescence mechanism, leading to the difficulty of obtaining RTP materials with long afterglow and high stability. Herein, multicolored carbon dots-RTP composites (CDs-X@BA) were successfully fabricated via a facile in situ confinement strategy using resorcinol as the carbon source. Specifically, resorcinol underwent in situ carbonization and condensation reactions in boric acid (BA) to form CDs, which were then confined in a rigid environment. Interestingly, the synthesized CDs-X@BA exhibit dual emission afterglow of RTP (550 nm) and thermally activated delayed fluorescence (TADF) (470 nm). Of these, RTP is derived from the formed CDs, while TADF is generated from BA. Notably, CDs-X@BA exhibit remarkable stability, even in water and harsh environments. This is attributed to the formed rigid B2O3 matrix, which combines with CDs through physical fixation, hydrogen bonds, and covalent bonds (B-C), fully stabilizing the triplet excitons and suppressing nonradiative transitions. Subsequently, CDs-X@BA exhibit highly promising potential in anticounterfeiting and information security. This work provides new insights for developing high-efficiency RTP materials.

Functionalization of a Ru(II) polypyridine complex with an aldehyde group as a synthetic precursor for photodynamic therapy

Photodynamic therapy has garnered significant attention over the past decades for its potential in treating various types of cancer, as well as bacterial, fungal, and viral infections. However, current clinically approved photosensitizers based on a tetrapyrrolic scaffold face notable limitations, including low water solubility, slow body clearance, and photobleaching. As a promising alternative, Ru(II) polypyridyl complexes have emerged due to their favorable photophysical and biological properties (i.e., reactive oxygen species generation, high water solubility, and biocompatibility). Despite these attractive properties, the vast majority of compounds are associated with poor tumor accumulation, representing a major hurdle for therapeutic applications. To overcome this limitation, herein, the chemical synthesis and photophysical evaluation of the functionalization of a Ru(II) polypyridyl complex with an aldehyde group, as a synthetic precursor for further conjugation, is reported. To ensure that the intrinsic chemical reactivity of the aldehyde group remains unaffected by the coordination environment to the metal center, a phenyl spacer was strategically introduced between the central ligand framework and the aldehyde functionality. Computational studies indicated that upon excitation of the metal complex, an excited state electron from the ruthenium t2g orbital is transferred to the π* ligand orbital in a metal-to-ligand charge transfer transition. The compound was found to be highly stable under physiological conditions as well as upon irradiation. Upon light exposure, the metal complex was found to efficiently convert molecular oxygen to singlet oxygen. These findings highlight the potential of the aldehyde functionalized Ru(II) polypyridyl complex as a versatile precursor for photodynamic therapy.

Radiative pumping vs vibrational relaxation of molecular polaritons: a bosonic mapping approach

We present a formalism to study molecular polaritons based on the bosonization of molecular vibronic states. This formalism accommodates an arbitrary number of molecules N, excitations and internal vibronic structures, making it ideal for investigating molecular polariton processes accounting for finite N effects. We employ this formalism to rigorously derive radiative pumping and vibrational relaxation rates. We show that radiative pumping is the emission from incoherent excitons and divide its rate into transmitted and re-absorbed components. On the other hand, the vibrational relaxation rate in the weak linear vibronic coupling regime is composed of a O ( 1 / N ) contribution already accounted for by radiative pumping, and a O ( 1 / N 2 ) contribution from a second-order process in the single-molecule light-matter coupling that we call polariton-assisted Raman scattering. This scattering is enhanced when the difference between fluorescence and lower polariton frequencies matches a Raman-active excitation.

Peripheral Engineering of Multiple-Resonance Framework Targeting Efficient Organic Lasers

Multiple-resonance thermally activated delayed fluorescent (MR-TADF) emitters have emerged as promising candidates for organic laser applications due to the potential for simultaneously achieving large oscillator strength and triplet utilization. In this study, we investigate the impact of peripheral tert-butyl (t-Bu)- and phenyl (Ph)-substituents on the typical 9-(phenylcarbazol-3-yl)-9H-carbazole-3-carbonitrile (CzBN) MR framework. Although these modifications preserve the frontier molecular orbital distribution with large oscillator strengths, they significantly influence excited-state dynamics and molecular aggregation even at low doping concentrations. Introducing Ph substituents extends the π-conjugation extension of CzBN, promoting closer molecular packing, detrimental molecular aggregation, and significantly broadening the excited-state absorption (ESA) band, which negatively impacts lasing performance. In contrast, CzBN-tBu, incorporating t-Bu groups as nonconjugated substituents, demonstrated reduced molecular aggregation and a distinct separation between the ESA band and stimulated emission region. Consequently, the optimal distributed feedback lasing performance is achieved by CzBN-tBu across various doping concentrations, resulting in the lowest lasing threshold of 3.4 µJ cm-2. These findings underscore the impact of inherent aggregation at low doping ratios on lasing activities, highlighting the crucial role of rational peripheral engineering in modulating molecular interactions and excited-state dynamics, offering design strategies for developing MR lasing molecules.

Breaking the angular dispersion limit in thin film optics by ultra-strong light-matter coupling

Thin film interference is integral to modern photonics, e.g., allowing for precise design of high performance optical filters, photovoltaics and light-emitting devices. However, interference inevitably leads to a generally undesired change of spectral characteristics with angle. Here, we introduce a strategy to overcome this fundamental limit in optics by utilizing and tuning the exciton-polariton modes arising in ultra-strongly coupled microcavities. We demonstrate optical filters with narrow pass bands that shift by less than their half width (< 15 nm) even at extreme angles. By expanding this strategy to strong coupling with the photonic sidebands of dielectric multilayer stacks, we also obtain filters with high extinction ratios and up to 98% peak transmission. Finally, we apply this approach in flexible filters, organic photodiodes, and polarization-sensitive filtering. These results illustrate how strong coupling provides additional degrees of freedom in thin film optics that will enable exciting new applications in micro-optics, sensing, and biophotonics.

Lowering of the singlet-triplet energy gap via intramolecular exciton-exciton coupling

Organic dyes typically have electronically excited states of both singlet and triplet multiplicity. Controlling the energy difference between these states is a key factor for making efficient organic light emitting diodes and triplet sensitizers, which fulfill essential functions in chemistry, physics, and medicine. Here, we propose a strategy to shift the singlet excited state of a known sensitizer to lower energies without shifting the energy of the triplet state, thus without compromising the ability of the sensitizer to do work. We covalently connect two to four sensitizers in such a way that their transition dipole moments are aligned in a head-to-tail fashion, but, through steric encumbrance, the delocalization is minimized between each moiety. Exciton coupling between the singlet excited states considerably lowers the first excited singlet state energy. However, the energy of the lowest triplet excited state is unperturbed because the exciton coupling strength depends on the magnitude of the transition dipole moments, which for triplets are very small. We expect that the presented strategy of designed intramolecular exciton coupling will be a useful concept in the design of both photosensitizers and emitters for organic light emitting diodes as both benefits from a small singlet-triplet energy gap.

Theory of Magnetic Properties in Quantum Electrodynamics Environments: Application to Molecular Aromaticity

In this work, we present ab initio cavity quantum electrodynamics (QED) methods which include interactions with a static magnetic field and nuclear spin degrees of freedom using different treatments of the quantum electromagnetic field. We derive explicit expressions for QED-HF magnetizability, nuclear shielding, and spin-spin coupling tensors. We apply this theory to explore the influence of the cavity field on the magnetizability of saturated, unsaturated, and aromatic hydrocarbons, showing the effects of different polarization orientations and coupling strengths. We also examine how the cavity affects aromaticity descriptors, such as the nucleus-independent chemical shift and magnetizability exaltation. We employ these descriptors to study the trimerization reaction of acetylene to benzene. We show how the optical cavity induces modifications in the aromatic character of the transition state leading to variations in the activation energy of the reaction. Our findings shed light on the effects induced by the cavity on magnetic properties, especially in the context of aromatic molecules, providing valuable insights into understanding the interplay between the quantum electromagnetic field and molecules.

Thermal disorder prevents the suppression of ultra-fast photochemistry in the strong light-matter coupling regime

Strong coupling between molecules and confined light modes of optical cavities to form polaritons can alter photochemistry, but the origin of this effect remains largely unknown. While theoretical models suggest a suppression of photochemistry due to the formation of new polaritonic potential energy surfaces, many of these models do not account for the energetic disorder among the molecules, which is unavoidable at ambient conditions. Here, we combine simulations and experiments to show that for an ultra-fast photochemical reaction such thermal disorder prevents the modification of the potential energy surface and that suppression is due to radiative decay of the lossy cavity modes. We also show that the excitation spectrum under strong coupling is a product of the excitation spectrum of the bare molecules and the absorption spectrum of the molecule-cavity system, suggesting that polaritons can act as gateways for channeling an excitation into a molecule, which then reacts normally. Our results therefore imply that strong coupling provides a means to tune the action spectrum of a molecule, rather than to change the reaction.

Reverse Intersystem Crossing Dynamics in Vibronically Modulated Inverted Singlet-Triplet Gap System: A Wigner Phase Space Study

We inspect the origin of the inverted singlet-triplet gap (INVEST) and slow change in the reverse intersystem crossing (rISC) rate with temperature, as recently observed. A Wigner phase space study reveals that, though INVEST is found at equilibrium geometry, variation in the exchange interaction and the doubles-excitation for other geometries in the harmonic region leads to non-INVEST behavior. This highlights the importance of nuclear degrees of freedom for the INVEST phenomenon, and in this case, geometric puckering of the studied molecule determines INVEST and the associated rISC dynamics.

Identifying the origin of delayed electroluminescence in a polariton organic light-emitting diode

Modifying the energy landscape of existing molecular emitters is an attractive challenge with favourable outcomes in chemistry and organic optoelectronic research. It has recently been explored through strong light-matter coupling studies where the organic emitters were placed in an optical cavity. Nonetheless, a debate revolves around whether the observed change in the material properties represents novel coupled system dynamics or the unmasking of pre-existing material properties induced by light-matter interactions. Here, for the first time, we examined the effect of strong coupling in polariton organic light-emitting diodes via time-resolved electroluminescence studies. We accompanied our experimental analysis with theoretical fits using a model of coupled rate equations accounting for all major mechanisms that can result in delayed electroluminescence in organic emitters. We found that in our devices the delayed electroluminescence was dominated by emission from trapped charges and this mechanism remained unmodified in the presence of strong coupling.

Linear optical properties of organic microcavity polaritons with non-Markovian quantum state diffusion

Hybridisation of the cavity modes and the excitons to polariton states together with the coupling to the vibrational modes determine the linear optical properties of organic semiconductors in microcavities. In this article we compute the refractive index for such system using the Holstein-Tavis-Cummings model and determine then the linear optical properties using the transfer matrix method. We first extract the parameters for the exciton in our model from fitting to experimentally measured absorption of a 2,7-bis[9,9-di(4-methylphenyl)-fluoren-2-yl]-9,9-di(4-methylphenyl) fluorene (TDAF) molecular thin film. Then we compute the reflectivity of such a thin film in a metal clad microcavity system by including the dispersive microcavity mode to the model. We compute susceptibility of the model systems evolving just a single state vector by using the non-Markovian quantum state diffusion. The computed location and height of the lower and upper polaritons agree with the experiment within the estimated errorbars for small angles ( ≤ 30 ° ) . For larger angles the location of the polariton resonances are within the estimated error.

Controlling Molecular Photoisomerization in Photonic Cavities through Polariton Funneling

Strong coupling between photonic modes and molecular electronic excitations, creating hybrid light-matter states called polaritons, is an attractive avenue for controlling chemical reactions. Nevertheless, experimental demonstrations of polariton-modified chemical reactions remain sparse. Here, we demonstrate modified photoisomerization kinetics of merocyanine and diarylethene by coupling the reactant's optical transition with photonic microcavity modes. We leverage broadband Fourier-plane optical microscopy to noninvasively and rapidly monitor photoisomerization within microcavities, enabling systematic investigation of chemical kinetics for different cavity-exciton detunings and photoexcitation conditions. We demonstrate three distinct effects of cavity coupling: first, a renormalization of the photonic density of states, akin to a Purcell effect, leads to enhanced absorption and isomerization rates at certain wavelengths, notably red-shifting the onset of photoisomerization. This effect is present under both strong and weak light-matter couplings. Second, kinetic competition between polariton localization into reactive molecular states and cavity losses leads to a suppression of the photoisomerization yield. Finally, our key result is that in reaction mixtures with multiple reactant isomers, exhibiting partially overlapping optical transitions and distinct isomerization pathways, the cavity resonance can be tuned to funnel photoexcitations into specific reactant isomers. Thus, upon decoherence, polaritons localize into a chosen isomer, selectively triggering the latter's photoisomerization despite initially being delocalized across all isomers. This result suggests that careful tuning of the cavity resonance is a promising avenue to steer chemical reactions and enhance product selectivity in reaction mixtures.

Molecular Polaritons for Chemistry, Photonics and Quantum Technologies

Molecular polaritons are quasiparticles resulting from the hybridization between molecular and photonic modes. These composite entities, bearing characteristics inherited from both constituents, exhibit modified energy levels and wave functions, thereby capturing the attention of chemists in the past decade. The potential to modify chemical reactions has spurred many investigations, alongside efforts to enhance and manipulate optical responses for photonic and quantum applications. This Review centers on the experimental advances in this burgeoning field. Commencing with an introduction of the fundamentals, including theoretical foundations and various cavity architectures, we discuss outcomes of polariton-modified chemical reactions. Furthermore, we navigate through the ongoing debates and uncertainties surrounding the underpinning mechanism of this innovative method of controlling chemistry. Emphasis is placed on gaining a comprehensive understanding of the energy dynamics of molecular polaritons, in particular, vibrational molecular polaritons─a pivotal facet in steering chemical reactions. Additionally, we discuss the unique capability of coherent two-dimensional spectroscopy to dissect polariton and dark mode dynamics, offering insights into the critical components within the cavity that alter chemical reactions. We further expand to the potential utility of molecular polaritons in quantum applications as well as precise manipulation of molecular and photonic polarizations, notably in the context of chiral phenomena. This discussion aspires to ignite deeper curiosity and engagement in revealing the physics underpinning polariton-modified molecular properties, and a broad fascination with harnessing photonic environments to control chemistry.

A figure of merit for efficiency roll-off in TADF-based organic LEDs

Organic light-emitting diodes (OLEDs) are a revolutionary light-emitting display technology that has been successfully commercialized in mobile phones and televisions1,2. The injected charges form both singlet and triplet excitons, and for high efficiency it is important to enable triplets as well as singlets to emit light. At present, materials that harvest triplets by thermally activated delayed fluorescence (TADF) are a very active field of research as an alternative to phosphorescent emitters that usually use heavy metal atoms3,4. Although excellent progress has been made, in most TADF OLEDs there is a severe decrease of efficiency as the drive current is increased, known as efficiency roll-off. So far, much of the literature suggests that efficiency roll-off should be reduced by minimizing the energy difference between singlet and triplet excited states (ΔEST) to maximize the rate of conversion of triplets to singlets by means of reverse intersystem crossing (kRISC)5-20. We analyse the efficiency roll-off in a wide range of TADF OLEDs and find that neither of these parameters fully accounts for the reported efficiency roll-off. By considering the dynamic equilibrium between singlets and triplets in TADF materials, we propose a figure of merit for materials design to reduce efficiency roll-off and discuss its correlation with reported data of TADF OLEDs. Our new figure of merit will guide the design and development of TADF materials that can reduce efficiency roll-off. It will help improve the efficiency of TADF OLEDs at realistic display operating conditions and expand the use of TADF materials to applications that require high brightness, such as lighting, augmented reality and lasing.

Understanding the Nature of Vibro-Polaritonic States in Water and Heavy Water

Very recent experiments on vibrational strong coupling tend to modify chemical reactivity, energy transfer, and many other physical properties of the coupled system. This is achieved without external stimuli and is very sensitive to the vibrational envelope. Water is an excellent vibrational oscillator, which is being used for similar experiments. However, the inhomogeneously broad OH/OD stretching vibrational band make it complicated to characterize the vibro-polaritonic states spectroscopically. In this paper, we performed vibrational strong coupling and mapped the evolution of vibro-polaritonic branches from low to high concentration of H2 O and measured the on-set of strong coupling. The refractive index dispersion is correlated with the cavity tuning experiments. These results are further compared with transfer matrix simulations. Simulated data deviate as noted in the dispersion spectra as the system enters into ultra-strong coupling due to enhanced self-dipolar interactions. Hopfield coefficients calculation shows that even at ±400 cm-1 detuning, the vibro-polaritonic states still possess hybrid characteristics. We systematically varied the concentration of H2 O and mapped the weak, intermediate, and strong coupling regimes to understand the role of inhomogeneously broad OH/OD stretching vibrational band. Our finding may help to better understand the role of H2 O/D2 O strong coupling in the recent polaritonic chemistry experiments.

Selection Bias in Strong Coupling Experiments

The strong coupling of light and molecules offers a potential new pathway to modify the properties of photonic modes and molecules. There are many reasons to be optimistic about the prospects of strong coupling; however, progress in this field is currently hindered by challenges in reproducibility, problems associated with differentiating between strong coupling and other effects, and the lack of a clear theoretical model to describe the reported effects. Concerning the question of differentiating between strong coupling and other possible mechanisms when examining experimental data, here, we show how cognitive bias can lead us to place undue emphasis on a given interpretation of unsystematic experimental data. We hope that this Viewpoint will, where appropriate, help readers to plan strong coupling experiments more carefully and evaluate the significance of the data obtained from them.

The Rise and Current Status of Polaritonic Photochemistry and Photophysics

The interaction between molecular electronic transitions and electromagnetic fields can be enlarged to the point where distinct hybrid light-matter states, polaritons, emerge. The photonic contribution to these states results in increased complexity as well as an opening to modify the photophysics and photochemistry beyond what normally can be seen in organic molecules. It is today evident that polaritons offer opportunities for molecular photochemistry and photophysics, which has caused an ever-rising interest in the field. Focusing on the experimental landmarks, this review takes its reader from the advent of the field of polaritonic chemistry, over the split into polariton chemistry and photochemistry, to present day status within polaritonic photochemistry and photophysics. To introduce the field, the review starts with a general description of light-matter interactions, how to enhance these, and what characterizes the coupling strength. Then the photochemistry and photophysics of strongly coupled systems using Fabry-Perot and plasmonic cavities are described. This is followed by a description of room-temperature Bose-Einstein condensation/polariton lasing in polaritonic systems. The review ends with a discussion on the benefits, limitations, and future developments of strong exciton-photon coupling using organic molecules.

Developing Solution-Processed Distributed Bragg Reflectors for Microcavity Polariton Applications

Improving the performance of organic optoelectronics has been under vigorous research for decades. Recently, polaritonics has been introduced as a technology that has the potential to improve the optical, electrical, and chemical properties of materials and devices. However, polaritons have been mainly studied in optical microcavities that are made by vacuum deposition processes, which are costly, unavailable to many, and incompatible with printed optoelectronics methods. Efforts toward the fabrication of polariton microcavities with solution-processed techniques have been utterly absent. Herein, we demonstrate for the first time strong light-matter coupling and polariton photoluminescence in an organic microcavity consisting of an aluminum mirror and a distributed Bragg reflector (DBR) made by sequential dip coating of titanium hydroxide/poly(vinyl alcohol) (TiOH/PVA) and Nafion films. To fabricate and develop the solution-processed DBRs and microcavities, we automatized a dip-coating device that allowed us to produce sub-100 nm films consistently over many dip-coating cycles. Owning to the solution-based nature of our DBRs, our results pave the way to the realization of polariton optoelectronic devices beyond physical deposition methods.

Molecular Chemistry in Cavity Strong Coupling

The coherent exchange of energy between materials and optical fields leads to strong light-matter interactions and so-called polaritonic states with intriguing properties, halfway between light and matter. Two decades ago, research on these strong light-matter interactions, using optical cavity (vacuum) fields, remained for the most part the province of the physicist, with a focus on inorganic materials requiring cryogenic temperatures and carefully fabricated, high-quality optical cavities for their study. This review explores the history and recent acceleration of interest in the application of polaritonic states to molecular properties and processes. The enormous collective oscillator strength of dense films of organic molecules, aggregates, and materials allows cavity vacuum field strong coupling to be achieved at room temperature, even in rapidly fabricated, highly lossy metallic optical cavities. This has put polaritonic states and their associated coherent phenomena at the fingertips of laboratory chemists, materials scientists, and even biochemists as a potentially new tool to control molecular chemistry. The exciting phenomena that have emerged suggest that polaritonic states are of genuine relevance within the molecular and material energy landscape.

Control and Enhancement of Single-Molecule Electroluminescence through Strong Light-Matter Coupling

The energetic positions of molecular electronic states at molecule/electrode interfaces are crucial factors for determining the transport and optoelectronic properties of molecular junctions. Strong light-matter coupling offers a potential for manipulating these factors, enabling a boost in the efficiency and versatility of these junctions. Here, we investigate electroluminescence from single-molecule junctions in which the molecule is strongly coupled with the vacuum electromagnetic field in a plasmonic nanocavity. We demonstrate an improvement in the electroluminescence efficiency by employing the strong light-matter coupling in conjunction with the characteristic feature of single-molecule junctions to selectively control the formation of the lowest-energy excited state. The mechanism of efficiency improvement is discussed based on the energetic position and composition of the formed polaritonic states. Our findings indicate the possibility to manipulate optoelectronic conversion in molecular junctions by strong light-matter coupling and contribute to providing design principles for developing efficient molecular optoelectronic devices.

Quantitative Investigation of the Rate of Intersystem Crossing in the Strong Exciton-Photon Coupling Regime

Strong interactions between excitons and photons lead to the formation of exciton-polaritons, which possess completely different properties compared to their constituents. The polaritons are created by incorporating a material in an optical cavity where the electromagnetic field is tightly confined. Over the last few years, the relaxation of polaritonic states has been shown to enable a new kind of energy transfer event, which is efficient at length scales substantially larger than the typical Förster radius. However, the importance of such energy transfer depends on the ability of the short-lived polaritonic states to efficiently decay to molecular localized states that can perform a photochemical process, such as charge transfer or triplet states. Here, we investigate quantitatively the interaction between polaritons and triplet states of erythrosine B in the strong coupling regime. We analyze the experimental data, collected mainly employing angle-resolved reflectivity and excitation measurements, using a rate equation model. We show that the rate of intersystem crossing from the polariton to the triplet states depends on the energy alignment of the excited polaritonic states. Furthermore, it is demonstrated that the rate of intersystem crossing can be substantially enhanced in the strong coupling regime to the point where it approaches the rate of the radiative decay of the polariton. In light of the opportunities that transitions from polaritonic to molecular localized states offer within molecular photophysics/chemistry and organic electronics, we hope that the quantitative understanding of such interactions gained from this study will aid in the development of polariton-empowered devices.

Symmetry-Induced Singlet-Triplet Inversions in Non-Alternant Hydrocarbons

Molecules with inversion of the singlet and triplet excited-state energies are highly promising for the development of organic light-emitting diodes (OLEDs). To date, azaphenalenes are the only class of molecules where these inversions have been identified. Here, we screen a curated database of organic crystal structures to identify existing compounds for violations of Hund's rule in the lowest excited states. We identify two further classes with this behavior. The first, a class of zwitterions, has limited relevance to molecular emitters as the singlet-triplet inversions occur in the third excited singlet state. The second class consists of two D_2h -symmetry non-alternant hydrocarbons, a fused azulene dimer and a bicalicene, whose lowest excited singlet states violate Hund's rule. Due to the connectivity of the polycyclic structure, they achieve this symmetry through aromatic stabilization. These hydrocarbons show promise as the next generation of building blocks for OLED emitters.

Perspectives on weak interactions in complex materials at different length scales

Nanocomposite materials consist of nanometer-sized quantum objects such as atoms, molecules, voids or nanoparticles embedded in a host material. These quantum objects can be exploited as a super-structure, which can be designed to create material properties targeted for specific applications. For electromagnetism, such targeted properties include field enhancements around the bandgap of a semiconductor used for solar cells, directional decay in topological insulators, high kinetic inductance in superconducting circuits, and many more. Despite very different application areas, all of these properties are united by the common aim of exploiting collective interaction effects between quantum objects. The literature on the topic spreads over very many different disciplines and scientific communities. In this review, we present a cross-disciplinary overview of different approaches for the creation, analysis and theoretical description of nanocomposites with applications related to electromagnetic properties.

Molecular polariton electroabsorption

We investigate electroabsorption (EA) in organic semiconductor microcavities to understand whether strong light-matter coupling non-trivially alters their nonlinear optical [[Formula: see text]] response. Focusing on strongly-absorbing squaraine (SQ) molecules dispersed in a wide-gap host matrix, we find that classical transfer matrix modeling accurately captures the EA response of low concentration SQ microcavities with a vacuum Rabi splitting of [Formula: see text] meV, but fails for high concentration cavities with [Formula: see text] meV. Rather than new physics in the ultrastrong coupling regime, however, we attribute the discrepancy at high SQ concentration to a nearly dark H-aggregate state below the SQ exciton transition, which goes undetected in the optical constant dispersion on which the transfer matrix model is based, but nonetheless interacts with and enhances the EA response of the lower polariton mode. These results indicate that strong coupling can be used to manipulate EA (and presumably other optical nonlinearities) from organic microcavities by controlling the energy of polariton modes relative to other states in the system, but it does not alter the intrinsic optical nonlinearity of the organic semiconductor inside the cavity.

Polariton enhanced free charge carrier generation in donor-acceptor cavity systems by a second-hybridization mechanism

Cavity quantum electrodynamics has been studied as a potential approach to modify free charge carrier generation in donor-acceptor heterojunctions because of the delocalization and controllable energy level properties of hybridized light-matter states known as polaritons. However, in many experimental systems, cavity coupling decreases charge separation. Here, we theoretically study the quantum dynamics of a coherent and dissipative donor-acceptor cavity system, to investigate the dynamical mechanism and further discover the conditions under which polaritons may enhance free charge carrier generation. We use open quantum system methods based on single-pulse pumping to find that polaritons have the potential to connect excitonic states and charge separated states, further enhancing free charge generation on an ultrafast timescale of several hundred femtoseconds. The mechanism involves polaritons with optimal energy levels that allow the exciton to overcome the high Coulomb barrier induced by electron-hole attraction. Moreover, we propose that a second-hybridization between a polariton state and dark states with similar energy enables the formation of the hybrid charge separated states that are optically active. These two mechanisms lead to a maximum of 50% enhancement of free charge carrier generation on a short timescale. However, our simulation reveals that on the longer timescale of picoseconds, internal conversion and cavity loss dominate and suppress free charge carrier generation, reproducing the experimental results. Thus, our work shows that polaritons can affect the charge separation mechanism and promote free charge carrier generation efficiency, but predominantly on a short timescale after photoexcitation.

Detuning Effects on the Reverse Intersystem Crossing from Triplet Exciton to Lower Polariton

The lower polariton (LP) can reduce the energy barrier of the reverse intersystem crossing (rISC) process from T₁ to harvest triplet energy for fluorescence. Based on a Tavis-Cummings model including both singlet and triplet excitons, both coupled with quantized photons, we derive here a comprehensive rISC rate formalism. We found that the latter consists of three contributions: the one originated from spin-orbit coupling as first obtained by Martinez-Martinez et al. ( J. Chem. Phys. 2019, 151, 054106), the one from light-matter coupling of Ou et al. ( J. Am. Chem. Soc. 2021, 143, 17786), and the cross-term first reported here. We apply the formalism to investigate the experimentally observed barrier-free rISC (BFrISC) process in cavity devices with DABNA-2 molecular thin film. We found it can be attributed to the detuning effect. The rISC rates can be increased by orders of magnitude through changing the detuning energy to realize the BFrISC process. In addition, the BFrISC rates exhibit a maximum as a function of the incident angle and the doping concentration. The formalism provides a solid ground for molecular design toward highly efficient cavity-promoted light-emitting materials.

Organic molecules with inverted singlet-triplet gaps

According to Hund's multiplicity rule, the energy of the lowest excited triplet state (T1) is always lower than that of the lowest excited singlet state (S1) in organic molecules, resulting in a positive singlet-triplet energy gap (ΔE ST). Therefore, the up-converted reverse intersystem crossing (RISC) from T1 to S1 is an endothermic process, which may lead to the quenching of long-lived triplet excitons in electroluminescence, and subsequently the reduction of device efficiency. Interestingly, organic molecules with inverted singlet-triplet (INVEST) gaps in violation of Hund's multiplicity rule have recently come into the limelight. The unique feature has attracted extensive attention in the fields of organic optoelectronics and photocatalysis over the past few years. For an INVEST molecule possessing a higher T1 with respect to S1, namely a negative ΔE ST, the down-converted RISC from T1 to S1 does not require thermal activation, which is possibly conducive to solving the problems of fast efficiency roll-off and short lifetime of organic light-emitting devices. By virtue of this property, INVEST molecules are recently regarded as a new generation of organic light-emitting materials. In this review, we briefly summarized the significant progress of INVEST molecules in both theoretical calculations and experimental studies, and put forward suggestions and expectations for future research.

Collective response in light-matter interactions: The interplay between strong coupling and local dynamics

Strong molecule-radiation field coupling is often reached when a large number N of molecules respond collectively to the radiation field. In electronic strong coupling, molecular nuclear dynamics following polariton excitation reflects (a) the timescale separation between the fast electronic and photonic dynamics and the slow nuclear motion on one hand, and (b) the interplay between the collective nature of the molecule-field coupling and the local nature of the molecules nuclear response on the other. The first implies that the electronic excitation takes place, in the spirit of the Born approximation, at an approximately fixed nuclear configuration. The second can be rephrased as the intriguing question, can the collective nature of the optical excitation lead to collective nuclear motion following polariton formation, resulting in so-called polaron decoupled dynamics. We address this issue by studying the dynamical properties of a simplified Holstein-Tavis-Cummings type model, in which boson modes representing molecular vibrations are replaced by two-level systems while the boson frequency and the vibronic coupling are represented by the coupling between these levels (that induces Rabi oscillations between them) and electronic state dependence of this coupling. We investigate the short-time behavior of this model following polariton excitation as well as its response to CW driving and its density of states spectrum. We find that, while some aspects of the dynamical behavior appear to adhere to the polaron decoupling picture, the observed dynamics mostly reflect the local nature of the nuclear configuration of the electronic polariton rather than this picture.

Brightening of a dark monolayer semiconductor via strong light-matter coupling in a cavity

Engineering the properties of quantum materials via strong light-matter coupling is a compelling research direction with a multiplicity of modern applications. Those range from modifying charge transport in organic molecules, steering particle correlation and interactions, and even controlling chemical reactions. Here, we study the modification of the material properties via strong coupling and demonstrate an effective inversion of the excitonic band-ordering in a monolayer of WSe₂ with spin-forbidden, optically dark ground state. In our experiments, we harness the strong light-matter coupling between cavity photon and the high energy, spin-allowed bright exciton, and thus creating two bright polaritonic modes in the optical bandgap with the lower polariton mode pushed below the WSe₂ dark state. We demonstrate that in this regime the commonly observed luminescence quenching stemming from the fast relaxation to the dark ground state is prevented, which results in the brightening of this intrinsically dark material. We probe this effective brightening by temperature-dependent photoluminescence, and we find an excellent agreement with a theoretical model accounting for the inversion of the band ordering and phonon-assisted polariton relaxation.

Here, the authors show brightening of dark excitons by strong coupling between cavity photons and high energy, spin-allowed, bright excitons in monolayer WSe₂. In this regime, the commonly observed photoluminescence quenching stemming from the fast relaxation to the dark ground state is prevented.

Evidence for a Polariton-Mediated Biexciton Transition in Single-Walled Carbon Nanotubes

Strong coupling of excitonic resonances with a cavity gives rise to exciton-polaritons which possess a modified energy landscape compared to the uncoupled emitter. However, due to the femtosecond lifetime of the so-called bright polariton states and transient changes of the cavity reflectivity under excitation, it is challenging to directly measure the polariton excited state dynamics. Here, near-infrared pump-probe spectroscopy is used to investigate the ultrafast dynamics of exciton-polaritons based on strongly coupled (6,5) single-walled carbon nanotubes in metal-clad microcavities. We present a protocol for fitting the reflectivity-associated response of the cavity using genetic algorithm-assisted transfer-matrix simulations. With this approach, we are able to identify an absorptive exciton-polariton feature in the transient transmission data. This feature appears instantaneously under resonant excitation of the upper polariton but is delayed for off-resonant excitation. The observed transition energy and detuning dependence point toward a direct upper polariton-to-biexciton transition. Our results provide direct evidence for exciton-polariton intrinsic transitions beyond the bright polariton lifetime in strongly coupled microcavities.

Interplay between Polaritonic and Molecular Trap States

Strong exciton-photon coupling exhibits the possibility to modify the photophysical properties of organic molecules. This is due to the introduction of hybrid light-matter states, called polaritons, which have unique physical and optical properties. Those strongly coupled systems provide altered excited-state dynamics in comparison to the bare molecule case. In this study, we investigate the interplay between polaritonic and molecular trap states, such as excimers. The molecules used in this study show either prompt or delayed emission from trap states. For both cases, a clear dependency on the exciton-photon energy tuning was observed. Polaritonic emission gradually increased with a concurrent removal of aggregation-induced emission when the systems were tuned toward lower energies. For prompt emission, it is not clear whether the experimental results are best explained by a predominant relaxation toward the lower polariton after excitation or by a direct excimer to polariton transition. However, for the delayed emission case, trap states are formed on the initially formed triplet manifold, making it evident that an excimer-to-polariton transition has occurred. These results unveil the possibility to control the trap state population by creating a strongly coupled system, which may form a mitigation strategy to counteract detrimental trap states in photonic applications.

Theoretical Challenges in Polaritonic Chemistry

Polaritonic chemistry exploits strong light-matter coupling between molecules and confined electromagnetic field modes to enable new chemical reactivities. In systems displaying this functionality, the choice of the cavity determines both the confinement of the electromagnetic field and the number of molecules that are involved in the process. While in wavelength-scale optical cavities the light-matter interaction is ruled by collective effects, plasmonic subwavelength nanocavities allow even single molecules to reach strong coupling. Due to these very distinct situations, a multiscale theoretical toolbox is then required to explore the rich phenomenology of polaritonic chemistry. Within this framework, each component of the system (molecules and electromagnetic modes) needs to be treated in sufficient detail to obtain reliable results. Starting from the very general aspects of light-molecule interactions in typical experimental setups, we underline the basic concepts that should be taken into account when operating in this new area of research. Building on these considerations, we then provide a map of the theoretical tools already available to tackle chemical applications of molecular polaritons at different scales. Throughout the discussion, we draw attention to both the successes and the challenges still ahead in the theoretical description of polaritonic chemistry.

Not dark yet for strong light-matter coupling to accelerate singlet fission dynamics

Polaritons are unique hybrid light-matter states that offer an alternative way to manipulate chemical processes. In this work, we show that singlet fission dynamics can be accelerated under strong light-matter coupling. For superexchange-mediated singlet fission, state mixing speeds up the dynamics in cavities when the lower polariton is close in energy to the multiexcitonic state. This effect is more pronounced in non-conventional singlet fission materials in which the energy gap between the bright singlet exciton and the multiexcitonic state is large ( > 0.1 eV). In this case, the dynamics is dominated by the polaritonic modes and not by the bare-molecule-like dark states, and, additionally, the resonant enhancement due to strong coupling is robust even for energetically broad molecular states. The present results provide a new strategy to expand the range of suitable materials for efficient singlet fission by making use of strong light-matter coupling.

Cavity quantum-electrodynamical time-dependent density functional theory within Gaussian atomic basis. II. Analytic energy gradient

Following the formulation of cavity quantum-electrodynamical time-dependent density functional theory (cQED-TDDFT) models [Flick et al., ACS Photonics 6, 2757–2778 (2019) and Yang et al., J. Chem. Phys. 155, 064107 (2021)], here, we report the derivation and implementation of the analytic energy gradient for polaritonic states of a single photochrome within the cQED-TDDFT models. Such gradient evaluation is also applicable to a complex of explicitly specified photochromes or, with proper scaling, a set of parallel-oriented, identical-geometry, and non-interacting molecules in the microcavity.

Exciton-Polaritons and Their Bose-Einstein Condensates in Organic Semiconductor Microcavities

Exciton-polaritons are half-light, half-matter bosonic quasiparticles formed by strong exciton-photon coupling in semiconductor microcavities. These hybrid particles possess the strong nonlinear interactions of excitons and keep most of the characteristics of the underlying photons. As bosons, above a threshold density they can undergo Bose-Einstein condensation to a polariton condensate phase and exhibit a rich variety of exotic macroscopic quantum phenomena in solids. Recently, organic semiconductors have been considered as a promising material platform for these studies due to their room-temperature stability, good processability, and abundant photophysics and photochemistry. Herein, recent advances of exciton-polaritons and their Bose-Einstein condensates in organic semiconductor microcavities are summarized. First, the basic physics is introduced, and then their emerging applications are highlighted. The remaining questions are also discussed and a personal viewpoint about the potential directions for future research is given.

Direct and Indirect Chemiluminescence: Reactions, Mechanisms and Challenges

Emission of light by matter can occur through a variety of mechanisms. When it results from an electronically excited state of a species produced by a chemical reaction, it is called chemiluminescence (CL). The phenomenon can take place both in natural and artificial chemical systems and it has been utilized in a variety of applications. In this review, we aim to revisit some of the latest CL applications based on direct and indirect production modes. The characteristics of the chemical reactions and the underpinning CL mechanisms are thoroughly discussed in view of studies from the very recent bibliography. Different methodologies aiming at higher CL efficiencies are summarized and presented in detail, including CL type and scaffolds used in each study. The CL role in the development of efficient therapeutic platforms is also discussed in relation to the Reactive Oxygen Species (ROS) and singlet oxygen (1O2) produced, as final products. Moreover, recent research results from our team are included regarding the behavior of commonly used photosensitizers upon chemical activation under CL conditions. The CL prospects in imaging, biomimetic organic and radical chemistry, and therapeutics are critically presented in respect to the persisting challenges and limitations of the existing strategies to date.

Femtosecond Photophysics of Molecular Polaritons

Molecular polaritons are hybrid states of photonic and molecular character that form when molecules strongly interact with light. Strong coupling tunes energy levels and, importantly, can modify molecular properties (e.g., photoreaction rates), opening an avenue for novel polariton chemistry. In this Perspective, we focus on the collective aspects of strongly coupled molecular systems and how this pertains to the dynamical response of such systems, which, though of key importance for attaining modified function under polariton formation, is still not well-understood. We discuss how the ultrafast time and spectral resolution make pump-probe spectroscopy an ideal tool to reveal the energy-transfer pathways from polariton states to other molecular states of functional interest. Finally, we illustrate how analyzing the free (rather than electronic) energy structure in molecular polariton systems may provide new clues into how energy flows and thus how strong coupling may be exploited.

Microcavity-like exciton-polaritons can be the primary photoexcitation in bare organic semiconductors

Strong-coupling between excitons and confined photonic modes can lead to the formation of new quasi-particles termed exciton-polaritons which can display a range of interesting properties such as super-fluidity, ultrafast transport and Bose-Einstein condensation. Strong-coupling typically occurs when an excitonic material is confided in a dielectric or plasmonic microcavity. Here, we show polaritons can form at room temperature in a range of chemically diverse, organic semiconductor thin films, despite the absence of an external cavity. We find evidence of strong light-matter coupling via angle-dependent peak splittings in the reflectivity spectra of the materials and emission from collective polariton states. We additionally show exciton-polaritons are the primary photoexcitation in these organic materials by directly imaging their ultrafast (5 × 10⁶m s^-1), ultralong (~270 nm) transport. These results open-up new fundamental physics and could enable a new generation of organic optoelectronic and light harvesting devices based on cavity-free exciton-polaritons.

Selective isomer emission via funneling of exciton polaritons

Polaritons in organic systems has shown the potential to modify chemical properties and to mediate long-range energy transfer between individual chromophores, among other capabilities. Here, we demonstrate that strong coupling and formation of organic exciton-polaritons can be used to selectively tune the isomer emission of organic molecules. By taking advantage of their delocalized and hybrid character, polaritons emerging in the strong coupling regime open a new relaxation pathway that allows for an efficient funneling of the excitation between the molecular isomers. We implement this by strong coupling to trans-DCS (E-4-dimethylamino-4′cyanostilbene)molecules, which present two isomers in different amounts when immersed in a polymer matrix. Thanks to this new relaxation pathway, the photoexcitation that is first shared by the common polaritonic mode is then selectively funneled to the excited states of one of the isomers, recognizing pure emission from the isomeric states that do not contribute to emission under normal conditions.

Enhanced Reverse Intersystem Crossing Promoted by Triplet Exciton-Photon Coupling

Polaritons are hybrid light-matter states formed via strong coupling between excitons and photons inside a microcavity, leading to upper and lower polariton (LP) bands splitting from the exciton. The LP has been applied to reduce the energy barrier of the reverse intersystem crossing (rISC) process from T₁, harvesting triplet energy for fluorescence through thermally activated delayed fluorescence. The spin-orbit coupling between T₁ and the excitonic part of the LP was considered as the origin for such an rISC transition. Here we propose a mechanism, namely, rISC promoted by the light-matter coupling (LMC) between T₁ and the photonic part of LP, which is originated from the ISC-induced transition dipole moment of T₁. This mechanism was excluded in previous studies. Our calculations demonstrate that the experimentally observed enhancement to the rISC process of the erythrosine B molecule can be effectively promoted by the LMC between T₁ and a photon. The proposed mechanism would substantially broaden the scope of the molecular design toward highly efficient cavity-promoted light-emitting materials and immediately benefit the illumination of related experimental phenomena.

Polariton Decay in Donor-Acceptor Cavity Systems

Enhanced delocalization is beneficial for absorbing molecules in organic solar cells, and in particular bilayer devices, where excitons face small diffusion lengths as a barrier to reaching the charge-generating donor-acceptor interface. As hybrid light-matter states, polaritons offer exceptional delocalization which could be used to improve the efficiency of bilayer organic photovoltaics. Polariton delocalization can aid in delivering excitons to the donor-acceptor interface, but the subsequent charge transfer event must compete with the fast decay of the polariton. To evaluate the viability of polaritons as tools to improve bilayer organic solar cells, we studied the decay of the lower polariton in three cavity systems: a donor only, a donor-acceptor bilayer, and a donor-acceptor blend. Using several spectroscopic techniques, we identified an additional decay pathway through charge transfer for the polariton in the bilayer cavity, demonstrating charge transfer from the polariton is fast enough to outcompete the decay to the ground state.

Are Heptazine-Based Organic Light-Emitting Diode Chromophores Thermally Activated Delayed Fluorescence or Inverted Singlet-Triplet Systems?

Two chromophores derived from heptazine, HAP-3MF and HAP-3TPA, were synthesized and tested as emitters in light-emitting diodes (OLEDs) by Adachi and co-workers. Both emitters were shown to exhibit quantum efficiencies which exceed the theoretical maximum of conventional fluorescent OLEDs. The enhanced emission efficiency was explained by the mechanism of thermally activated delayed fluorescence (TADF). In the present work, the electronic excitation energies and essential features of the topography of the excited-state potential-energy surfaces of HAP-3MF and HAP-3TPA have been investigated with a wave function-based ab initio method (ADC(2)). It is found that HAP-3MF is an inverted singlet-triplet (IST) system; that is, the energies of the S₁ and T₁ states are robustly inverted in violation of Hund's multiplicity rule. Notably, HAP-3MF presumably is the first IST emitter which was implemented in an OLED device. In HAP-3TPA, on the other hand, the vertical excitation energies of the S₁ and T₁ states are essentially degenerate. The excited states exhibit vibrational stabilization energies of similar magnitude along different relaxation coordinates, resulting in adiabatic excitation energies which also are nearly degenerate. HAP-3TPA is found to be a chromophore at the borderline of TADF and IST systems. The spectroscopic data reported by Adachi and co-workers for HAP-3MF and HAP-3TPA are analyzed in light of these computational results.