Dynamic rhenium dopant boosts ruthenium oxide for durable oxygen evolution

Simple and Scalable Introduction of Single-Atom Mn on RuO2 Electrocatalysts for Oxygen Evolution Reaction with Long-Term Activity and Stability

Electrochemical oxygen evolution reaction (OER) is the bottleneck for realizing renewable powered green hydrogen production through water splitting due to the challenges of electrode stability under harsh oxidative environments and electrolytes with extreme acidity and basicity. Here, we introduce a single-atom manganese-incorporated ruthenium oxide electrocatalyst via a facile impregnation approach for catalyzing the OER across a wide pH range, while solving the stability issues of RuO2. The modified catalyst maintains stability for over 1000 h, delivering a current density of 10 mA cm-2 at a 213 mV overpotential in acid (pH 0), 570 mV in potassium bicarbonate (pH 8.8), and 293 mV in alkaline media (pH 14), demonstrating exceptional durability under various conditions. When used as an anode for realistic water-splitting systems, Mn-modified RuO2 performs at 1000 mA cm-2 with a voltage of 1.69 V (Nafion 212 membrane) for proton-exchange membrane water electrolysis, and 1.84 V (UTP 220 diaphragm) for alkaline water electrolysis, exhibiting low degradation and verifying its substantial potential for practical applications.

Single-Atom Ru-Triggered Lattice Oxygen Redox Mechanism for Enhanced Acidic Water Oxidation

Activating the oxygen anionic redox presents a promising avenue for developing highly active oxygen evolution reaction (OER) electrocatalysts for proton-exchange membrane water electrolyzers (PEMWE). Here, we engineered a lattice-confined Ru single atom dispersed on a lamellar manganese oxide (MnO2) cation site. The strong Ru-O bond induced an upward shift in the O 2p band, enhancing metal-oxygen covalency and reshaping the OER mechanism toward lattice oxygen oxidation pathway with increased activity. In situ spectral characterization combined with density functional theory (DFT) calculations revealed that electron transfer from Mn to Ru alleviates the Jahn-Teller effect within the MnO6 octahedral structure, stabilizing the lattice. The layered Ru/MnO2 architecture also promotes the rapid replenishment of oxygen vacancies, preventing structural collapse. As a result, the optimized Ru/MnO2 electrocatalyst achieves an OER overpotential of only 179 mV at 10 mA cm-2 in 0.5 M H2SO4, along with exceptional durability over 1000 h at 100 mA cm-2. Moreover, the Ru/MnO2-based PEM device requires only 1.71 V to reach 1 A cm-2 and shows a durability of 500 h at 500 mA cm-2.

Distribution of Oxygen Vacancies in RuO2 Catalysts and Their Roles in Activity and Stability in Acidic Oxygen Evolution Reaction

By combining density functional theory (DFT) calculations and the cluster expansion (CE) model in an active-learning framework, we comprehensively studied the distribution features of oxygen vacancies (OV's) as well as their contributions to the stability and activity of the RuO2 catalyst in acidic oxygen evolution reaction (OER). The results show that OV's prefer to be located at bridge oxygen sites on the RuO2(110) surface and the next-nearest-neighbor trans positions of surface RuO6 octahedra in pairs due to interactions between two OV's, and high concentrations of OV's exhibit a continuous zigzag distribution in the (110) plane of RuO2. The oxygen vacancy distribution can be explained by the charge repulsion between the low-valent Ru and O, which is referred to as the "heterovalent ion-oxygen exclusion principle". In addition, the DFT results show that the presence of OV's cannot improve the inherent OER activity of specific Ru sites since low-valent Ru sites hinder deprotonation of the second water molecule. Nevertheless, OV's can improve the stability of RuO2 by suppressing the lattice oxygen mechanism (LOM) path. In summary, this work provides deeper insights into the mechanism of the OER of RuO2 with OV's in acidic media and a possible way to improve catalyst performance by using oxygen vacancy engineering.

Vacancy Engineering Strategy Releases the Electrocatalytic Oxygen Evolution Reaction Activity of High-Entropy Oxides

The sluggish kinetics of oxygen evolution reaction (OER) poses a great challenge to the industrial promotion of electrocatalytic water splitting and zinc-air battery. Herein, we demonstrate that the kinetic limitation of the OER imposed by a conventional adsorbate evolution mechanism can be successfully overcome through activating lattice oxygen in the electrocatalyst. For example, incorporating aluminum (Al) into high-entropy oxides (HEO) remarkably enhances the oxygen vacancy concentration, facilitates the generation of reactive oxygen species, and promotes the deprotonation during the electrochemical OER process, thereby boosting the kinetic reaction. This defect engineering strategy effectively decreases the energy barrier associated with the lattice oxygen oxidation and optimizes the configurational entropy of HEO, resulting in remarkable structural stability. Consequently, the developed HEO decorated with Al (HEO-Al) achieves an overpotential of ∼206 mV at 10 mA cm-2 in water electrolysis and a power density (∼20 mW cm-2) in rechargeable zinc-air battery, with long-term stability of 100 h, realizing an optimal balance between electrocatalytic activity and stability. More importantly, the performances of HEO-Al are significantly superior to those of the HEO counterpart (∼260 mV, ∼1.5 mW cm-2) and commercial ruthenium oxide (∼359 mV, ∼5 mW cm-2), showing great competitiveness and application prospect. These results offer essential inspiration for other electrochemical applications dominated by the OER at the same time.

Regulating Ru-Ru Distance in RuO2 Catalyst by Lattice Hydroxyl for Efficient Water Oxidation

Highly active and durable electrocatalysts for the oxygen evolution reaction (OER) are crucial for proton exchange membrane water electrolysis (PEMWE). While doped RuO2 catalysts demonstrate good activity and stability, the presence of dopants limits the number of exposed active sites and complicates Ru recovery. Here, we present a monometallic RuO2 (d-RuO2) with lattice hydroxyl in the periodic structure as a high-performance OER electrocatalyst. The obtained d-RuO2 catalyst exhibits a low overpotential of 150 mV and long-term operational stability of 500 h at 10 mA cm-2, outperforming many Ru/Ir-based oxides ever reported. A PEMWE device using d-RuO2 sustains operation for 348 h at 200 mA cm-2. In-situ characterization reveals that the incorporation of lattice hydroxyl increases the Ru-Ru distance, which facilitates the turnover of the Ru oxidation state and promotes the formation of stable edge-sharing [RuO6] octahedra during the OER, thereby accelerating the formation of O-O bonds and suppressing the overoxidation of Ru sites. Additionally, the small particle size of the catalyst decreases the three-phase contact line and promotes bubble release. This study will provide insights into the design and optimization of catalysts for various electrochemical reactions.

Synergistic niobium and manganese co-doping into RuO2 nanocrystal enables PEM water splitting under high current

Low-cost ruthenium-based catalysts with high activity have emerged as promising alternatives to iridium-based counterparts for acidic oxygen evolution reaction (OER) in proton exchange membrane water electrolyzers (PEMWE), but the poor stability under high current density remains as a key challenge. Here, we utilize the synergistic complementary strategy of introducing earth-abundant Mn and Nb dopants in ruthenium dioxide (RuO2) for Nb0.1Mn0.1Ru0.8O2 nanoparticle electrocatalyst that exhibits a low overpotential of 209 mV at 10 mA cm-2 and good stability of > 400 h at 0.2 A cm-2 in 0.5 M H2SO4. Significantly, a PEMWE device fabricated with Nb0.1Mn0.1Ru0.8O2 anode can operate continuously at least for 1000 h at 0.5 A cm-2 with 59 μV h-1 decay rate. Operando Raman spectroscopy analysis, differential electrochemical mass spectroscopy measurements, X-ray absorption spectroscopy analysis and theoretical calculations indicate that OER reaction on Nb0.1Mn0.1Ru0.8O2 primarily follows the adsorbate evolution mechanism with much favorable energy barrier accompanied by a locally passivated lattice oxygen mechanism (AEM-LPLOM) and the co-existed Nb and Mn in RuO2 crystal lattice could not only stabilize the lattice oxygen, but also relieve the valence state fluctuation of Ru site to stabilize the catalyst during the reaction.

Engineering high-density microcrystalline boundary with V-doped RuO2 for high-performance oxygen evolution in acid

Designing efficient acidic oxygen evolution catalysts for proton exchange membrane water electrolyzers is challenging due to a trade-off between activity and stability. In this work, we construct high-density microcrystalline grain boundaries (GBs) with V-dopant in RuO2 matrix (GB-V-RuO2). Our theoretical and experimental results indicate this is a highly active and acid-resistant OER catalyst. Specifically, the GB-V-RuO2 requires low overpotentials of 159, 222, and 300 mV to reach 10, 100, and 1500 mA cm-2geo in 0.5 M H2SO4, respectively. Operando EIS, ATR-SEIRAS FTIR and DEMS measurements reveal the importance of GBs in stabilizing lattice oxygen and thus inhibiting the lattice oxygen mediated OER pathway. As a result, the adsorbate evolution mechanism pathway becomes dominant, even at high current densities. Density functional theory analyses confirm that GBs can stabilize V dopant and that the synergy between them modulates the electronic structure of RuO2, thus optimizing the adsorption of OER intermediate species and enhancing electrocatalyst stability. Our work demonstrates a rational strategy for overcoming the traditional activity/stability dilemma, offering good prospects of developing high-performance acidic OER catalysts.

Re and Ru Co-Doped Transition Metal Alloy as a Bifunctional Catalyst for Electrooxidation of Glycerol to Formate Coupled with H2 Production

Glycerol electrooxidation (GOR), as an innovative strategy for the production of value-added chemicals, is considered a promising anodic alternative to oxygen evolution reaction in electrocatalysis. However, the high potential and the limited selectivity and faradaic efficiency impede the industrial-scale application toward GOR. Herein, we for the first time constructed rhenium and ruthenium co-doped transition metal alloy (NiCoFeRuRe) for the efficient electrooxidation of glycerol to formate. Benefiting from the rapid generation of M3+-OOH induced by Ru element and the inhibition of OER and excessive oxidation of glycerol by Re species through in situ chacterization, the optimized NiCoFeRuRe requires only 1.133 VRHE to achieve a current density of 10 mA cm-2, a faradaic efficiency of 95.6 % for formate product with a stability more than 450 h. Importantly, employing NiCoFeRuRe as a bifunctional catalyst, the cell is constructed to produce hydrogen and formate simultaneously, which is 265 mV lower than the electrolytic water splitting owning an excellent stability of 350 h. This work provides a facile strategy for rationally designing high-performance GOR catalysts for biomass upgradings.

Metal-oxygen bonding characteristics dictate activity and stability differences of RuO2 and IrO2 in the acidic oxygen evolution reaction

Ruthenium dioxide (RuO2) and iridium dioxide (IrO2) serve as benchmark electrocatalysts for the acidic oxygen evolution reaction (OER), yet their intrinsic activity-stability relationships remain elusive. Herein, we employ density functional theory (DFT) calculations to systematically investigate the origin of divergent OER catalytic behaviors between RuO2 and IrO2 in acidic media. Mechanistic analyses reveal that RuO2 follows the adsorbate evolution mechanism with superior activity (theoretical overpotential: 0.698 V vs. 0.909 V for IrO2), while IrO2 demonstrates enhanced stability due to a higher dissolution energy change (>2.9 eV vs. -0.306 eV for RuO2). Electronic structure analysis reveals that RuO2 exhibits ionic-dominated metal-oxygen bonds with delocalized electron distribution, facilitating intermediate desorption but promoting detrimental RuO42- dissolution. In contrast, IrO2 features covalent bonding characteristics with more electron filling in Ir-oxygen bonds (2.942 vs. 2.412 for RuO2), thereby stabilizing surface intermediates against dissolution at the expense of higher OER barriers. This work establishes a clear correlation between the bonding nature and electrocatalytic performance metrics, offering fundamental insights for the rational design of acid-stable OER electrocatalysts with optimized activity-stability relationships.

Rapid synthesis of metastable materials for electrocatalysis

Metastable materials are considered promising electrocatalysts for clean energy conversions by virtue of their structural flexibility and tunable electronic properties. However, the exploration and synthesis of metastable electrocatalysts via traditional equilibrium methods face challenges because of the requirements of high energy and precise structural control. In this regard, the rapid synthesis method (RSM), with high energy efficiency and ultra-fast heating/cooling rates, enables the production of metastable materials under non-equilibrium conditions. However, the relationship between RSM and the properties of metastable electrocatalysts remains largely unexplored. In this review, we systematically examine the unique benefits of various RSM techniques and the mechanisms governing the formation of metastable materials. Based on these insights, we establish a framework, linking RSM with the electrocatalytic performance of metastable materials. Finally, we outline the future directions of this emerging field and highlight the importance of high-throughput approaches for the autonomous screening and synthesis of optimal electrocatalysts. This review aims to provide an in-depth understanding of metastable electrocatalysts, opening up new avenues for both fundamental research and practical applications in electrocatalysis.

Fe doping intensifies the built-in electric field for tailoring the reconstruction of sulfides towards efficient oxygen evolution

The traditional view of sulfides as stable active centers has hindered the development of a clear structure-activity relationship and the rational design of high-performance oxygen evolution reaction (OER) catalysts. In this study, we focus on regulating sulfide reconstruction and have synthesized a Fe-Ni3S4/Cr2O3 pre-catalyst. Under the combined influence of the built-in electric field (BIEF) at the heterogeneous interface and Fe doping, both the sulfide reconstruction process and the electronic structure of the reconstructed product, namely Fe-NiOOH, were effectively tuned. The enhanced BIEF induced by Fe doping generated electron-rich regions on the sulfide surface, stabilizing the reconstruction process. Fe doping into the sulfide induced the incorporation of Fe into NiOOH, modulating the electronic states near the Fermi level of the metal-oxygen bond and subsequently activating the lattice oxygen mediated mechanism (LOM) of Fe-NiOOH, which serves as the true active center. Additionally, the BIEF optimized OH- diffusion dynamics and the energy consumption of hydroxyl deprotonation, reducing the energy barrier of the rate-limiting step of the LOM process, further enhancing OER activity. Remarkably, Fe-Ni3S4/Cr2O3 demonstrated excellent OER activity and commercial viability. This work offers a new perspective on the regulation of reconstruction products of pre-catalyst, providing fresh insights for the design of efficient OER catalysts.

Atomic Ga triggers spatiotemporal coordination of oxygen radicals for efficient water oxidation on crystalline RuO2

Advancements in proton-exchange membrane water electrolyzer depend on developing oxygen evolution reaction electrocatalysts that synergize high activity with stability. Here, we introduce an approach aimed at elevating oxygen evolution reaction performance by enhancing the spatiotemporal coordination of oxygen radicals to promote efficient O-O coupling. A dense, single-atom configuration of oxygen radical donors within interconnected RuO2 nanocrystal framework is demonstrated. The stable oxygen radicals on gallium sites with adaptable Ga-O bonds are thermodynamically favorable to attract those from Ru sites, addressing dynamic adaptation challenges and boosting O-O coupling efficiency. The optimized catalyst achieves a low overpotential of 188 mV at 10 mA cm-2, operates robustly for 800 h at 100 mA cm-2 in acidic conditions, and shows a large current density of 3 A cm-2 at 1.788 V, with stable performance at 0.5 A cm-2 for 200 h, confirming its long-term viability in proton-exchange membrane water electrolyzer applications.

Transforming the Poison Effects of Water Vapor into Benefits Over Adjustable Dual Acid Sites for Stable Plasma-Catalysis

Developing a new strategy to address water vapor poisoning is crucial for catalysts in real-working conditions. Except for the traditional thinking of resistance enhancement, a reverse idea is proposed herein of utilizing the inevitable H2O, converting it to active ·OH to enhance the overall performance, with the help of O3 and high energy electrons (e*) in plasma. Dual active sites of Lewis acid (Y3+) and Mn on YxMnyOx+2y catalyst promote the co-adsorption of H2O and O3, and the dissociation of H2O to surface hydroxyl species (*OH). A new OH-accompanied pathway for O3 decomposition is formed and a new intermediate species (*OOH) with a lower energy barrier (0.77 eV lower than traditional *O2 2-) is detected, in which e* in plasma can further accelerate its desorption. Thereafter, abundant active ·OH are generated and work for pollutants degradation, achieving 99.78% ethyl acetate (EA) degradation and 97.36% mineralization rate on the surface of YMO (1:2) under humid environment, with excellent long-term stability. The changed activation site of C─O bond in EA, different by-products, and reaction pathways are also analyzed. This active species regulation strategy transforms the traditional poison effects of water vapor into great benefits, paving the way for broader catalyst applications free of water vapor.

Iodine-Induced Redirection of Active Sources in Cu-Based Catalysts during Efficient and Stable Water Oxidation

Enhancing the mechanistic regulation of the oxygen evolution reaction (OER) is crucial for developing efficient and stable electrocatalysts. However, the dynamic variation of surface structure during the electrocatalytic process limits the accurate identification of the active source and underlying reaction mechanism. Herein, we report an iodine-doping strategy to direct the reconstruction of active species in CuS catalysts toward an unconventional oxygen vacancy oxidation mechanism, thereby overcoming the activity and stability limitations. Mechanistic analysis indicates that the electronic manipulation, weak coordination of Cu-S bonds, and lattice distortion induced by iodine-doping facilitate the thermodynamically favorable Cu2+ to Cu3+ oxidation during OER. The decisively formed oxygen vacancies are emphasized as a genuine active source to promote hydroxyl adsorption, with hypervalent Cu species acting as auxiliary sites to accelerate deprotonation by strengthening Cu-O covalent. Consequently, the optimal iodine-doped CuS exhibits a reduced overpotential of 189 mV at 10 mA cm-2 and superb stability prolonging to 1250 h. When used as a bifunctional electrode in a membrane electrode assembly electrolyzer, it also exhibits a low voltage of 1.65 V at 1 A cm-2, with electrolysis durability of 480 h and a low hydrogen cost of US$1.70/kg H2, outperforming the 2026 targets set by the U.S. Department of Energy.

Synergizing RuO2 with Fe-doped Co2RuO4 for boosting alkaline electrocatalytic oxygen evolution reaction

Designing and development of electrocatalysts with high catalytic capacity and stability for oxygen evolution reaction (OER) is significant for sustainable water splitting. In this study, we rationally designed Fe-doped Co2RuO4/RuO2 heterostructure electrocatalysts on nickel foam (NF) through mixture hydrothermal, ion exchanging, and calcining methods. The synergistic effect between the Fe-Co2RuO4/RuO2 heterogeneous interfaces can result in superior inherent activity. Meanwhile, the unique nanosheet on nanosheet structure delivers abundant exposed active sites, leading to improved catalytic activity. The resultant Fe-Co2RuO4/RuO2 heterostructured catalysts possessed superior OER property, attaining a current density of 50 mA cm-2 with only 253 mV overpotential in 1.0 M KOH alkaline solution, and demonstrating good durability with continuous operation for up to 50 h. This research provides robust support for the research and development of RuO2-based electrocatalysts through effective interface engineering and doping strategies, and opens up new avenues for the industrial application of water splitting technology.

Modulating the covalency of Ru-O bonds by dynamic reconstruction for efficient acidic oxygen evolution

Developing ruthenium-based oxide catalysts capable of suppressing lattice oxygen participation in the catalytic reaction process is crucial for maintaining stable oxygen evolution reaction (OER) under acidic conditions. Herein, we delicately construct a RuO2 nanoparticle-anchored LiCoO2 nanosheet electrocatalyst (RuO2/LiCoO2), achieving dynamic optimization of RuO2 during the reaction process and improving catalytic stability. Benefiting from the unique electrochemical delithiation characteristics of the LiCoO2 support, the covalency of the Ru-O bond is effectively regulated during the OER process. The weakened Ru-O covalent bond inhibits the participation of lattice oxygen in the catalytic reaction and ensures the continuous operation of the Ru active sites. Moreover, the extended Ru-O bond in the optimized RuO2/LiCoO2 catalyst reduces the formation energy barrier of the *OOH intermediates, accelerating the progress of the OER. As a result, the RuO2/LiCoO2 catalyst requires only an overpotential of 150 ± 2 mV at 10 mA cm-2 in 0.5 M H2SO4 and operates stably for 2000 h at 1 A cm-2 in a proton exchange membrane water electrolysis. This work opens new avenues for designing efficient ruthenium-based catalysts.

Modern Catalytic Materials for the Oxygen Evolution Reaction

The oxygen evolution reaction (OER) has, in recent years, attracted great interest from scientists because of its prime role in a number of renewable energy technologies. It is one of the reactions that occurs during hydrogen production through water splitting, is used in rechargeable metal-air batteries, and plays a fundamental role in regenerative fuel cells. Therefore, there is an emerging need to develop new, active, stable, and cost-effective materials for OER. This review presents the latest research on various groups of materials, showing their potential to be used as OER electrocatalysts, as well as their shortcomings. Particular attention has been paid to metal-organic frameworks (MOFs) and their derivatives, as those materials offer coordinatively unsaturated sites, high density of transition metals, adjustable pore size, developed surface area, and the possibility to be modified and combined with other materials.

Leveraging data mining, active learning, and domain adaptation for efficient discovery of advanced oxygen evolution electrocatalysts

Developing advanced catalysts for acidic oxygen evolution reaction (OER) is crucial for sustainable hydrogen production. This study presents a multistage machine learning (ML) approach to streamline the discovery and optimization of complex multimetallic catalysts. Our method integrates data mining, active learning, and domain adaptation throughout the materials discovery process. Unlike traditional trial-and-error methods, this approach systematically narrows the exploration space using domain knowledge with minimized reliance on subjective intuition. Then, the active learning module efficiently refines element composition and synthesis conditions through iterative experimental feedback. The process culminated in the discovery of a promising Ru-Mn-Ca-Pr oxide catalyst. Our workflow also enhances theoretical simulations with domain adaptation strategy, providing deeper mechanistic insights aligned with experimental findings. By leveraging diverse data sources and multiple ML strategies, we demonstrate an efficient pathway for electrocatalyst discovery and optimization. This comprehensive, data-driven approach represents a paradigm shift and potentially benchmark in electrocatalysts research.

Electrosynthesis of Urea on High-Density Ga─Y Dual-Atom Catalyst via Cross-Tuning

Electrochemically converting carbon dioxide (CO2) and nitrate (NO3 -) into urea via the C─N coupling route offers a sustainable alternative to the traditional industrial urea production technology, but it is still limited by poor yield rate, low Faradaic efficiency, and insufficient coupling kinetics. Herein, a high-density Ga─Y dual-atom catalyst is developed with loading up to 14.1 wt.% of Ga and Y supported on N, P-co-doped carbon substrate (Ga/Y-CNP) for urea electrosynthesis. The catalyst facilitates efficient C─N coupling through co-reduction of CO2 and NO3 -, resulting in a high urea yield rate of 41.9 mmol h-1 g-1 and a Faradaic efficiency of 22.1% at -1.4 V versus the reversible hydrogen electrode. In situ spectroscopy and theoretical calculations reveal that the superior performance is attributed to the cross-tuning between adjacent pair Ga─Y sites, which can mutually optimize their electronic states for facilitating CO2 reduction to *CO at Ga sites and promoting NO3 - conversion to hydroxylamine (*NH2OH) at Y sites, followed by spontaneous coupling of *CO and *NH2OH intermediates at Ga─Y sites to form C─N bonds. This work offers a pioneering strategy to manipulate C─N coupling pathways by cross-tuning active sites to produce high-value-added chemicals.

Anode Alchemy on Multiscale: Engineering from Intrinsic Activity to Impedance Optimization for Efficient Water Electrolysis

The past decade has seen significant progress in proton exchange membrane water electrolyzers (PEMWE), but the growing demand for cost-effective electrolytic hydrogen pushes for higher efficiency at lower costs. As a complex system, the performance of PEMWE is governed by a combination of multiscale factors. This review summarizes the latest progress from quantum to macroscopic scales. At the quantum level, electron spin configurations can be optimized to enhance catalytic activity. At the nano and meso scales, advancements in atomic structure optimization, crystal phase engineering, and heterostructure design improve catalytic performance and mass transport. At the macro scale, innovative techniques in gas bubble management and internal resistance reduction drive further efficiency gains under ampere-level operating conditions. These modifications at the quantum level cascade through meso- and macro-scales, affecting charge transfer, reaction kinetics, and gas evolution management. Unlike conventional approaches that focus solely on one scale-either at the catalyst level (e.g., atomic, or crystal modifications) or at the device level (e.g., porous transport layers design)-combining multiscale optimizations unlocks greater performance improvements. Finally, a perspective on future opportunities for multiscale engineering in PEMWE anode design toward commercial viability is offered.

Feasibility of Active and Durable Lattice Oxygen-Mediated Oxygen Evolution Electrocatalysts in Proton Exchange Membrane Water Electrolyzers Through d0 Metal Ion Incorporation

The primary hurdle faced in the practical application of proton exchange membrane water electrolyzer (PEMWE) involves improving the intrinsic kinetic activity of oxygen evolution reaction (OER) electrocatalysts while concurrently enhancing their durability. Although electrocatalysts based on lattice oxygen-mediated mechanism (LOM) have the potential to significantly enhance the activity in OER without being restricted by scaling relationships, they are neglected in acidic electrolytes due to limited durability. In this study, an innovative approach is presented to simultaneously promote the activation of lattice oxygen and improve the durability of LOM-based OER electrocatalysts by incorporating d0 metal ions into the RuO2 electrocatalyst. Leveraging the unique electronic properties of the d0 metal ion, the O 2p band center and Ru-O covalency of the electrocatalyst are successfully engineered, resulting in the change in OER mechanism. Furthermore, in a single cell of PEMWE, the LOM-based electrocatalyst demonstrates outstanding performance, achieving 3.0 A cm-2 at 1.81 V and maintaining durability for 100 h at 200 mA cm-2, surpassing commercial RuO2. This innovative strategy challenges the traditional viewpoint that suppressing lattice oxygen activation in OER is essential for enhancing PEMWE durability, offering new perspectives for the development of OER electrocatalysts in acidic electrolytes.

The Critical Role of Atomic-Scale Polarization in Transition Metal Oxides on Vanadium-Redox Electrochemistry

Transition metal oxide electrocatalysts (TMOEs) are poised to revive grid-scale all-vanadium redox flow batteries (VRFBs) due to their low-cost and unique electronic properties, while often inescapably harboring surface vacancies. The role of local vacancy-induced physicochemical properties on vanadium-redox electrochemistry (VRE), encompassing kinetics, and stability, remains profoundly unveiled. Herein, for the first time, it is revealed that vacancies induce atomic-scale polarization in TMOEs and elucidate its mechanism in VRE. Attributable to local polarization, particularly by cation vacancy, the activated nearest-coordinated Mn sites prominently augment the adsorption competence of the V2+/V3+ couple and expedite its round-tripping by forming an intermediate *Mn-O-V bridge. It is also affirmed that the anion vacancies are vulnerable to microstructure reconfiguration by feeble hydroxyl adsorption and thus performance degradation over long-term cycling, in contrast to cation vacancies. Accordingly, the VRFB employing cation-vacancy-functionalized electrode delivers an energy efficiency of 80.8% and a reliable 1000-cycle lifespan with a negligible decay of 0.57% per cycle at 300 mA cm-2, outclassing others. The findings shed light on the fundamental rules governing the utility and evolution of vacancies in TMOEs, thereby moving a step closer toward their deployment in a wide range of sustainable energy storage schemes.

Atomically Dispersed Mn-Ir Sites on 2D Amorphous Carbon Materials Synergistically Boost Electrochemical Overall Water Splitting

Enhancing the activity and durability of noble-metal-based catalysts for overall water splitting is crucial for advancing sustainable energy conversion. In this study, a novel catalyst, PBN-Ir/Mn, is reported, developed through a self-healing process of the polyhexabenzocoronene network (PBN) that incorporates both Mn and Ir atoms. Aberration-corrected high-angle annular dark-field scanning transmission electron microscopy (AC-HAADF-STEM) and X-ray absorption spectroscopy (XAS) characterizations confirm a unique atomic-scale Ir-Ir-Mn triangular structure on the porous PBN substrate. The synergy between Mn and Ir atoms leads to superior water electrolysis performance, with ultra-low overpotentials of 11 mV for the hydrogen evolution reaction (HER) and 220 mV for the oxygen evolution reaction (OER) at 10 mA cm-2. PBN-Ir/Mn also achieves outstanding mass activities, reaching 425.92 A mg-1 for HER and 152.28 A mg-1 OER. Moreover, PBN-Ir/Mn demonstrates exceptional durability in overall water splitting, maintaining stable performance over 100 h in a full-cell setup, surpassing commercial benchmarks. Density functional theory (DFT) calculations reveal that Mn doping modifies the d-band center of Ir, reducing the activation energy barriers and significantly enhancing both activity and stability. The high performance and stability of PBN-Ir/Mn, combined with its scalability for gram-scale synthesis, highlight its potential for industrial applications and multifunctional catalysis.

Inhibiting Overoxidation of Dynamically Evolved RuO2 to Achieve a Win-Win in Activity-Stability for Acidic Water Electrolysis

Proton exchange membrane (PEM) water electrolysis offers an efficient route to large-scale green hydrogen production, in which the RuO2 catalyst exhibits superior activity but limited stability. Unveiling the atomic-scale structural evolution during operando reaction conditions is critical but remains a grand challenge for enhancing the durability of the RuO2 catalyst in the acidic oxygen evolution reaction (a-OER). This study proposes an adaptive machine learning workflow to elucidate the potential-dependent state-to-state global evolution of the RuO2(110) surface within a complex composition and configuration space, revealing the correlation between structural patterns and stability. We identify the active state with distorted RuO5 units that self-evolve at low potential, which exhibits minor Ru dissolution and an activity self-promotion phenomenon. However, this state exhibits a low potential resistance capacity (PRC) and evolves into inert RuO4 units at elevated potential. To enhance PRC and mitigate the overevolution of the active state, we explore the metal doping engineering and uncover an inverse volcano-type doping rule: the doped metal-oxygen bond strength should significantly differ from the Ru-O bond. This rule provides a theoretical framework for designing stable RuO2-based catalysts and clarifies current discrepancies regarding the roles of different metals in stabilizing RuO2. Applying this rule, we predict and confirm experimentally that Na can effectively stabilize RuO2 in its active state. The synthesized Na-RuO2 operates in a-OER for over 1800 h without any degradation and enables long-term durability in PEM electrolysis. This work enhances our understanding of the operando structural evolution of RuO2 and aids in designing durable catalysts for a-OER.

Establishing the Link Between Oxygen Vacancy and Activity Enhancement in Acidic Water Oxidation of Trigonal Iridium Oxide

Developing durable IrO2-based electrocatalysts with high oxygen evolution reaction (OER) activity under acidic condition is crucial for proton exchange membrane electrolyzers. While oxygen defects are considered potentially important in OER, their direct relationship with catalytic activity has yet to be established. In this study, we introduced abundant oxygen vacancies through Re doping in 2D IrO2 (Re0.03Ir0.97O2), demonstrating their decisive role in enhancing OER performance. The Re0.03Ir0.97O2 catalyst exhibited excellent OER performance with an overpotential of 193 mV at 10 mA cm-2 and sustained activity for over 650 hours, significantly surpassing the undoped catalyst. Moreover, it maintained operation at a cell voltage of 1.70 V (~1200 mA cm-2) for over 140 hours without significant performance degradation. Theoretical calculations coupled with cyclic voltammetry, transient potential scanning and in situ characterizations confirmed the adsorbate evolving mechanism on Re0.03Ir0.97O2, as well as the critical role of Re-induced oxygen vacancies in enhancing OER performance. These findings highlight that oxygen defects directly influence OER activity, providing guidance for the application of oxygen vacancy engineering in electrocatalyst design.

Optimizing Acidic Oxygen Evolution Reaction via Modulation Doping in Van der Waals Layered Iridium Oxide

Anodic oxygen evolution reaction (OER) exhibits a sluggish four-electron transfer process, necessitating catalysts with exceptional catalytic activity to enhance its kinetic rate. Van der Waals layered oxides are ideal materials for catalyst design, yet its stability for acidic OER remains large obstacle. Doping provides a crucial way to improve the activity and stability simultaneously. However, doping in Van der Waals layered oxides remains a great challenge since it easily leads to lattice distortion or even the crystal structure damage. In this work, we successfully doping acid-resistant niobium (Nb) into Van der Waals layered edge-shared 1T phase iridium oxide (1 T-IrO2) via alkali-assisted thermal method. 1 T-IrO2 with a 5 % Nb doping (Nb0.05Ir0.95O2) only required an overpotential of 191 mV to achieve a current density of 10 mA cm-2 in 0.5 M H2SO4, 56 mV lower than that of 1T-IrO2. When applied in proton exchange membrane water electrolyzer, Nb0.05Ir0.95O2 show stable operation at a high current density of 1.2 A cm-2 for over 50 days. Density functional theory calculation reveals that doping Nb changes the potential-determining step from the *OOH deprotonation process in 1 T-IrO2 to the *O-OH coupling process in Nb0.05Ir0.95O2.

Recent achievements in noble metal-based oxide electrocatalysts for water splitting

The search for sustainable energy sources has accelerated the exploration of water decomposition as a clean H2 production method. Among the methods proposed, H2 production via water electrolysis has garnered considerable attention. However, the process of H2 production from water electrolysis is severely limited by the slow kinetics of the anodic oxygen evolution reaction and large intrinsic overpotentials at the anode; therefore, suitable catalysts need to be found to accelerate the reaction rate. Noble metal-based oxide electrocatalysts retain the advantages of abundant active sites, high electrical conductivity of noble metals, and low cost, which make them promising electrocatalysts; however, they suffer from the challenge of an imbalance between catalytic activity and stability. This review presents recent research progress in noble metals and their oxides as electrocatalysts. In this review, two half-reactions (the hydrogen evolution reaction and the oxygen evolution reaction) of water electrolysis are described. Recently reported methods for the synthesis of noble metal-based oxide electrocatalysts, improvement strategies, and sources of enhanced activity and stability for these types of catalysts are presented. Finally, the challenges and future perspectives in the field are summarised. This review is expected to help improve the understanding of noble metal-based oxide electrocatalysts.

Interface Engineering of RuO2/Ni-Co3O4 Heterostructures for enhanced acidic oxygen evolution reaction

RuO2 has been recognized as a standard electrocatalyst for acidic oxygen evolution reaction (OER). Nonetheless, its high cost and limited durability are still ongoing challenges. Herein, a RuO2/Ni-Co3O4 heterostructure confining a heterointerface (between RuO2 and Ni-doped Co3O4) is constructed to realize enhanced OER performance. Specifically, RuO2/Ni-Co3O4 containing a low Ru content (2.7 ± 0.3 wt%) achieves an overpotential of 186 mV at a current density of 10 mA cm-2 with a long-run stability (≥1300 h). Also, it exhibits a mass activity of 1202.29 mA mgRu-1 at an overpotential of 250 mV, exceeding commercial RuO2. The results disclose an optimum electron transfer at the heterointerface, wherein Ni doping improves the adsorption energy of oxygen-containing intermediates, thereby facilitating OER. This study presents an effective approach for designing highly active and stable OER electrocatalysts.

Hydroxylation Strategy Enables Ru-Mn Oxide for Stable Proton Exchange Membrane Water Electrolysis under 1 A cm-2

Ruthenium (Ru)-based catalysts have demonstrated promising utilization potentiality to replace the much expensive iridium (Ir)-based ones for proton exchange membrane water electrolysis (PEMWE) due to their high electrochemical activity and low cost. However, the susceptibility of RuO2-based materials to easily be oxidized to high-valent and soluble Ru species during the oxygen evolution reaction (OER) in acid media hinders the practical application, especially under current density above 500 mA cm-2. Here, a manganese-doped RuO2 catalyst with the hydroxylated metal sites (i.e., H-Mn0.1Ru0.9O2) is synthesized for acidic OER assisted by hydrogen peroxide, where the hydroxylation results in the valence state of the Ru sites below +4. The H-Mn0.1Ru0.9O2 catalyst demonstrates an overpotential of 169 mV at 10 mA cm-2 and promising stability for an OER over 1000 h in an acidic electrolyte. A PEMWE device fabricated with the H-Mn0.1Ru0.9O2 catalyst as the anode shows a current density of 1 A cm-2 at ∼1.65 V, along with a low degradation over continuous tens of hours. Differential electrochemical mass spectrometry (DEMS) results and theoretical calculations confirm that H-Mn0.1Ru0.9O2 performs the OER through the adsorbate evolution mechanism (AEM) pathway, where the synergistic effect of hydroxylation and Mn doping in RuO2 can effectively enhance the stability of Ru sites and lattice oxygen atoms.

Advances in Oxygen Evolution Reaction Electrocatalysts via Direct Oxygen-Oxygen Radical Coupling Pathway

Oxygen evolution reaction (OER) is a cornerstone of various electrochemical energy conversion and storage systems, including water splitting, CO2/N2 reduction, reversible fuel cells, and rechargeable metal-air batteries. OER typically proceeds through three primary mechanisms: adsorbate evolution mechanism (AEM), lattice oxygen oxidation mechanism (LOM), and oxide path mechanism (OPM). Unlike AEM and LOM, the OPM proceeds via direct oxygen-oxygen radical coupling that can bypass linear scaling relationships of reaction intermediates in AEM and avoid catalyst structural collapse in LOM, thereby enabling enhanced catalytic activity and stability. Despite its unique advantage, electrocatalysts that can drive OER via OPM remain nascent and are increasingly recognized as critical. This review discusses recent advances in OPM-based OER electrocatalysts. It starts by analyzing three reaction mechanisms that guide the design of electrocatalysts. Then, several types of novel materials, including atomic ensembles, metal oxides, perovskite oxides, and molecular complexes, are highlighted. Afterward, operando characterization techniques used to monitor the dynamic evolution of active sites and reaction intermediates are examined. The review concludes by discussing several research directions to advance OPM-based OER electrocatalysts toward practical applications.

Coupling Built-in Electric Field and Lewis Acid Triggers the Lattice Oxygen-Mediated Mechanism for Efficient Water Oxidation

The oxygen evolution reaction catalyst triggering lattice oxygen-mediated mechanism (LOM) can break the activity limitation imposed by the adsorbate evolution mechanism scaling relationship. However, triggering LOM is challenging due to the thermodynamic disadvantages associated with lattice oxygen redox reactions. Here, a Lewis acid-modified layered double hydroxides (LDH) heterojunction catalyst (LDH/Cr2O3) is designed. The asymmetric charge distribution at the heterojunction interface, induced by the built-in electric field, shifts the electron transfer center from the lower Hubbard band to non-bonding oxygen, thereby activating LOM. The enrichment of OH- and the enhanced covalency of the metal-oxygen bond by Lewis acid optimize the pH-dependent and high-energy consumption during the hydroxyl (OH*) deprotonation process of LOM. Furthermore, the activation of lattice oxygen and accelerated OH* deprotonation facilitate the surface reconstruction of LDH. Consequently, the LDH/Cr2O3 exhibits excellent catalytic activity, with an overpotential of only 237 mV (at 10 mA cm-2) in 1.0 m KOH electrolyte. The catalyst maintains excellent activity in simulated seawater and 0.1 m KOH electrolyte. Furthermore, it demonstrates outstanding practical functionality, as the assembled commercial-scale alkaline electrolyzer operates stably for 50 h. This work may provide new approaches and theoretical insights for triggering and optimizing LOM.

Phase-Engineered Bi-RuO2 Single-Atom Alloy Oxide Boosting Oxygen Evolution Electrocatalysis in Proton Exchange Membrane Water Electrolyzer

Engineering nanomaterials at single-atomic sites can enable unprecedented catalytic properties for broad applications, yet it remains challenging to do so on RuO2-based electrocatalysts for proton exchange membrane water electrolyzer (PEMWE). Herein, the rational design and construction of Bi-RuO2 single-atom alloy oxide (SAAO) are presented to boost acidic oxygen evolution reaction (OER), via phase engineering a novel hexagonal close packed (hcp) RuBi single-atom alloy. This Bi-RuO2 SAAO electrocatalyst exhibits a low overpotential of 192 mV and superb stability over 650 h at 10 mA cm-2, enabling a practical PEMWE that needs only 1.59 V to reach 1.0 A cm-2 under industrial conditions. Operando differential electrochemical mass spectroscopy analysis, coupled with density functional theory studies, confirmed the adsorbate-evolving mechanism on Bi-RuO2 SAAO and that the incorporation of Bi1 improves the activity by electronic density optimization and the stability by hindering surface Ru demetallation. This work not only introduces a new strategy to fabricate high-performance electrocatalysts at atomic-level, but also demonstrates their potential use in industrial electrolyzers.

Ru0.1Mn0.9Ox Electrocatalyst for Durable Oxygen Evolution in Acid Seawater

Currently, direct electrolysis of seawater for green hydrogen production is primarily focused on neutral and alkaline systems. However, the precipitation of calcium and magnesium ions restricts the advancement of this technology. An acidic system can effectively address this issue. Given that Ru/Ir-based catalysts with high oxygen evolution reaction (OER) activity also exhibit high chlorine evolution reaction (CER) activity, acid seawater splitting requires anodes with higher selectivity and stability compared to the other two systems. In this study, we propose a non-precious Ru0.1Mn0.9Ox as the active anode for direct acid seawater electrolysis, which exhibits a high OER selectivity and remarkable stability for more than 1200 hours. Different from the Cl--free system, *Cl occupied on Ru sites could shift the OER active center to Mn on Ru0.1Mn0.9Ox, which prevents the lattice oxygen consumed on Ru and hinders the metal site dissolution. As the CER-insensitive catalytic center, Mn activated by the introduction of Ru can adsorb a substantial amount of *OH, creating an OER-favored local environment that inhibits CER. We introduce Cl--assisted transfer of OER active sites to CER-insensitive Mn as a fundamental strategy for achieving highly selective and durable oxygen evolution in acidic seawater.

Chloride Residues in RuO2 Catalysts Enhance Its Stability and Efficiency for Acidic Oxygen Evolution Reaction

. Ruthenium dioxide (RuO2) is a benchmark electrocatalyst for proton exchange membrane water electrolyzers (PEMWE), but its stability during the oxygen evolution reaction (OER) is often compromised by lattice oxygen involvement and metal dissolution. Despite that the typical synthesis of RuO2 produces chloride residues, the underlying function of chloride have not well investigated. In this study, we synthesized chlorine-containing RuO2 (RuO2-Cl) and pure RuO2 catalysts with similar morphology and crystallinity. RuO2-Cl demonstrated superior stability, three times greater than that of pure RuO2, and a lower overpotential of 176 mV at 10 mA cm-2. Furthermore, the RuO2-Cl catalysts that were in situ synthesized on a platinum-coated titanium felt could maintain high performance for up to 1200 hours at 100 mA cm-2. Computational and experimental analyses show that chloride stabilizes RuO2 by substituting the bridging oxygen atoms, which subsequently inhibits lattice oxygen evolution and Ru demetallation. Notably, this substitution also lowers the energy barrier of the rate-determining step by strengthening the binding of *OOH intermediates. These findings offer new insights into the previously unknown role of chloride residues and how to improve RuO2 stability.

Effectiveness of strain and dopants on breaking the activity-stability trade-off of RuO2 acidic oxygen evolution electrocatalysts

Ruthenium dioxide electrocatalysts for acidic oxygen evolution reaction suffer from mediocre activity and rather instability induced by high ruthenium-oxygen covalency. Here, the tensile strained strontium and tantalum codoped ruthenium dioxide nanocatalysts are synthesized via a molten salt-assisted quenching strategy. The tensile strained spacially elongates the ruthenium-oxygen bond and reduces covalency, thereby inhibiting the lattice oxygen participation and structural decomposition. The synergistic electronic modulations among strontium-tantalum-ruthenium groups both optimize deprotonation on oxygen sites and intermediates absorption on ruthenium sites, lowering the reaction energy barrier. Those result in a well-balanced activity-stability profile, confirmed by comprehensive experimental and theoretical analyses. Our strained electrode demonstrates an overpotential of 166 mV at 10 mA cm-2 in 0.5 M H2SO4 and an order of magnitude higher S-number, indicating comparable stability compared to bare catalyst. It exhibits negligible degradation rates within the long-term operation of single cell and PEM electrolyzer. This study elucidates the effectiveness of tensile strain and strategic doping in enhancing the activity and stability of ruthenium-based catalysts for acidic oxygen evolution reactions.

Dual Doping in Precious Metal Oxides: Accelerating Acidic Oxygen Evolution Reaction

Developing a highly active and stable catalyst for acidic oxygen evolution reactions (OERs), the key half-reaction for proton exchange membrane water electrolysis, has been one of the most cutting-edge topics in electrocatalysis. A dual-doping strategy optimizes the catalyst electronic environment, modifies the coordination environment, generates vacancies, and introduces strain effects through the synergistic effect of two elements to achieve high catalytic performance. In this review, we summarize the progress of dual doping in RuO2 or IrO2 for acidic OERs. The three main mechanisms of OERs are dicussed firstly, followed by a detailed examination of the development history of dual-doping catalysts, from experimentally driven dual-doping systems to machine learning (ML) and theoretical screening of dual-doping systems. Lastly, we provide a summary of the remaining challenges and future prospects, offering valuable insights into dual doping for acidic OERs.

Transition Metal-Coordinated Polymer Achieves Stable Seawater Oxidation over NiFe Layered Double Hydroxide

Seawater electrolysis has emerged as a promising approach for the generation of hydrogen energy, but the production of deleterious chlorine derivatives (e.g., chloride and hypochlorite) presents a significant challenge due to the severe corrosion at the anode. Transition metal-coordinated polymers have garnered attention as promising electrocatalysts for alkaline seawater oxidation (ASO), attributed to their remarkable chlorine corrosion resistance, high conductivity, and facile synthesis. In this study, we employ an anodic oxidation-electrodeposition strategy to grow NiFe-polyaniline on NiFe layered double hydroxide supported on Ni foam (NiFe LDH@NiFe-PANI/NF) as a highly efficient catalyst for ASO. We demonstrate stable ASO at industrial-level current densities (j) by employing a synergistic strategy that integrates NiFe-PANI, which offers resistance to chlorine-induced corrosion, and molybdate, which effectively repels chloride anions. In alkaline seawater, NiFe LDH@NiFe-PANI/NF requires 380 mV to sustain a j of 1000 mA cm-2, and it exhibits continuous operation for 500 h at a j of 1000 mA cm-2. Besides, the anion-exchange membrane electrolyzer consisting of NiFe LDH@NiFe-PANI/NF requires a voltage of 2.16 V to drive 300 mA cm-2. Notably, it can operate stably for 120 h, highlighting its potential for sustainable energy applications.

Switchable Acidic Oxygen Evolution Mechanisms on Atomic Skin of Ruthenium Metallene Oxides

RuO2 has been considered as a promising, low-cost, and highly efficient catalyst in the acidic oxygen evolution reaction (OER). However, it suffers from poor stability due to the inevitable involvement of the lattice oxygen mechanism (LOM). Here, we construct a unique metallene-based core-skin structure and unveil that the OER pathway of atomic RuO2 skin can be regulated from the LOM to an adsorbate evolution mechanism by altering the core species from metallene oxides to metallenes. This switch is achieved without sacrificing the number of active sites, enabling Pd@RuO2 metallenes to exhibit outstanding acidic OER activity with a low overpotential of 189 mV at 10 mA cm-2, which is 54 mV lower than that of the counterpart PdO@RuO2 metallenes. Additionally, they also exhibit robust stability with negligible activity decay over 100 h at 50 mA cm-2, outperforming most reported RuO2-based catalysts. Multiple spectroscopic analyses and theoretical calculations demonstrate that the Pd-metallene core, acting as an electron donor, increases the migration energy of subsurface oxygen atoms and optimizes the adsorption energy of intermediates on the active Ru sites, enabling a switch in the reaction mechanism. Such a unique metallene-based core-skin structure offers a novel way for tuning the catalytic behaviors of electrocatalysts.

Strontium Doped IrOx Triggers Direct O-O Coupling to Boost Acid Water Oxidation Electrocatalysis

The discovery of efficient and stable electrocatalysts for the oxygen evolution reaction (OER) in acidic conditions is crucial for the commercialization of proton-exchange membrane water electrolyzers. In this work, we propose a Sr(OH)2-assisted method to fabricate a (200) facet highly exposed strontium-doped IrOx catalyst to provide available adjacent iridium sites with lower Ir-O covalency. This design facilitates direct O-O coupling during the acidic water oxidation process, thereby circumventing the high energy barrier associated with the generation of *OOH intermediates. Benefiting from this advantage, the resulting Sr-IrOx catalyst exhibits an impressive overpotential of 207 mV at a current density of 10 mA cm-2 in 0.5 M H2SO4. Furthermore, a PEMWE device utilizing Sr-IrOx as the anodic catalyst demonstrates a cell voltage of 1.72 V at 1 A cm-2 and maintains excellent stability for over 500 hours. Our work not only provides guidance for the design of improved acidic OER catalysts but also encourages the development of iridium-based electrocatalysts with novel mechanisms for other electrocatalytic reactions.

Insight into the influence of Re and Cl on Ag catalysts in ethylene epoxidation

Commercial ethylene epoxidation catalysts consist of α-alumina supported Ag particles and usually contain a mixture of promoters. High selectivity catalysts typically include a small amount of rhenium species. We studied a series of Ag catalysts promoted with Re loadings up to 4 at% (Re/(Re + Ag)), which is intentionally higher than in optimized commercial catalysts to facilitate characterization and to amplify the influence on catalysis. Sequential impregnation brought Re and Ag in such close contact that they formed a new characterized phase of AgReO4. Chemisorption experiments showed that both ReO x and AgReO4 species act as a reversible reservoir for O2. Ethylene epoxidation was performed without and with the industrially crucial ethyl chloride promoter in the feed. Without the chloride (Cl), the ethylene oxide selectivity increased when Re was present, whereas the combination of Re and Cl decreased the ethylene oxide selectivity at higher Re loadings. Systematic ethylene oxide isomerization experiments revealed that Re and Cl individually inhibit the isomerization on the Ag surface. However, Re and Cl combined increased the isomerization, which can be explained by the surface becoming overly electrophilic. This hence shows the importance of studying promoters both individually and combined.

Undoped ruthenium oxide as a stable catalyst for the acidic oxygen evolution reaction

Reducing green hydrogen production cost is critical for its widespread application. Proton-exchange-membrane water electrolyzers are among the most promising technologies, and significant research has been focused on developing more active, durable, and cost-effective catalysts to replace expensive iridium in the anode. Ruthenium oxide is a leading alternative while its stability is inadequate. While considerable progress has been made in designing doped Ru oxides and composites to improve stability, the uncertainty in true failure mechanism in acidic oxygen evolution reaction inhibits their further optimization. This study reveals that proton participation capability within Ru oxides is a critical factor contributing to their instability, which can induce catalyst pulverization and the collapse of the electrode structure. By restricting proton participation in the bulk phase and stabilizing the reaction interface, we demonstrate that the stability of Ru-oxide anodes can be notably improved, even under a high current density of 4 A cm‒2 for over 100 h. This work provides some insights into designing Ru oxide-based catalysts and anodes for practical water electrolyzer applications.

Electron-Donating Zr Induces Suppressed Ru Over-Oxidation and Accelerated Deprotonation Process Toward Efficient and Durable Water Electrolysis

The scarcity of cost-effective and durable iridium-free anode electrocatalysts for the oxygen evolution reaction (OER) poses a significant challenge to the widespread application of the proton exchange membrane water electrolyzer (PEMWE). To address the electrochemical oxidation and dissolution issues of Ru-based electrocatalysts, an electron-donating modification strategy is developed to stabilize WRuOx under harsh oxidative conditions. The optimized catalyst with a low Zirconium doping (Zr, 1 wt.%) enhances durability noticeably, with a 77% reduction in degradation rate in the durability test of 10 mA cm-2 in 0.5 m H2SO4. When integrated into a homemade PEMWE device, the Zr-doped catalyst achieves excellent long-term stability, lasting up to 650 h at 100 mA cm⁻2. Additionally, the electronic modulation from the Zr modification leads to superior activity with a low overpotential of 208 mV at 10 mA cm-2. Theoretical calculation results further reveal that electron-donating Zr modification effectively suppresses Ru overoxidation and lattice oxygen participation, maintaining a robust structure during acidic OER. This modification also promotes deprotonation through stronger Brønsted acid sites, significantly improving both long-term stability and activity.

Atomic-level Ru-Ir mixing in rutile-type (RuIr)O2 for efficient and durable oxygen evolution catalysis

The success of proton exchange membrane water electrolysis (PEMWE) depends on active and robust electrocatalysts to facilitate oxygen evolution reaction (OER). Heteroatom-doped-RuOx has emerged as a promising electrocatalysts because heteroatoms suppress lattice oxygen participation in the OER, thereby preventing the destabilization of surface Ru and catalyst degradation. However, identifying suitable heteroatoms and achieving their atomic-scale coupling with Ru atoms are nontrivial tasks. Herein, to steer the reaction pathway away from the involvement of lattice oxygen, we integrate OER-active Ir atoms into the RuO2 matrix, which maximizes the synergy between stable Ru and active Ir centers, by leveraging the changeable growth behavior of Ru/Ir atoms on lattice parameter-modulated templates. In PEMWE, the resulting (RuIr)O2/C electrocatalysts demonstrate notable current density of 4.96 A cm-2 and mass activity of 19.84 A mgRu+Ir-1 at 2.0 V. In situ spectroscopic analysis and computational calculations highlight the importance of the synergistic coexistence of Ru/Ir-dual-OER-active sites for mitigating Ru dissolution via the optimization of the binding energy with oxygen intermediates and stabilization of Ru sites.

Optimizing Acidic Oxygen Evolution with Manganese-Doped Ruthenium Dioxide Assembly

Ruthenium dioxide (RuO2) is one of the promising catalysts for the acidic oxygen evolution reaction (OER). However, designing RuO2 catalysts with good activity and stability remains a significant challenge. In this work, we propose the manganese (Mn)-doped RuO2 assembly as a catalyst for the OER with improved activity and stability. Consequently, the optimized 7% Mn-RuO2 exhibits exceptional OER activity in 0.5 M H2SO4, delivering a low overpotential of 195 mV to achieve a current density of 10 mA cm-2. Furthermore, it displays the highest mass activity among all the tested catalysts, reaching 587.9 A gRu-1 at 1.5 V versus the reversible hydrogen electrode (vs RHE), which is 7.8 and 139.8 times higher than those of undoped RuO2 and commercial RuO2, respectively. Moreover, 7% Mn-RuO2 demonstrates remarkable stability over a continuous operation to 100 h (at 10 mA cm-2) without significant performance attenuation. Additionally, theoretical calculations indicate that Mn doping weakens the adsorption of the OER intermediates and modifies the potential-determining step (PDS) of the OER, thereby reducing the OER overpotential. Consequently, strategies involving Mn doping can effectively enhance the overall kinetics of the OER. This work offers a promising approach for the design of efficient water electrolysis catalysts.

Enhanced Acidic Oxygen Evolution Reaction Performance by Anchoring Iridium Oxide Nanoparticles on Co3O4

The sluggish kinetics of the anodic process, known as the oxygen evolution reaction (OER), has posed a significant challenge for the practical application of proton exchange membrane water electrolyzers in industrial settings. This study introduces a high-performance OER catalyst by anchoring iridium oxide nanoparticles (IrO2) onto a cobalt oxide (Co3O4) substrate via a two-step combustion method. The resulting IrO2@Co3O4 catalyst demonstrates a significant enhancement in both catalytic activity and stability in acidic environments. Notably, the overpotential required to attain a current density of 10 mA cm-2, a commonly used benchmark for comparison, is merely 301 mV. Furthermore, stability is maintained over a duration of 80 h, as confirmed by the minimal rise in overpotential. Energy spectrum characterizations and experimental results reveal that the generation of OER-active Ir3+ species on the IrO2@Co3O4 surface is induced by the strong interaction between IrO2 and Co3O4. Theoretical calculations further indicate that IrO2 sites loaded onto Co3O4 have a lower energy barrier for *OOH deprotonation to form desorbed O2. Moreover, this interaction also stabilizes the iridium active sites by maintaining their chemical state, leading to superior long-term stability. These insights could significantly impact the strategies for designing and synthesizing more efficient OER electrocatalysts for broader industrial application.

Activity-Stability Relationships in Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is a critical process in various sustainable energy technologies. Despite substantial progress in catalyst development, the practical application of OER catalysts remains hindered by the ongoing challenge of balancing high catalytic activity with long-term stability. We explore the inverse trends often observed between activity and stability, drawing on key insights from both experimental and theoretical studies. Special focus is placed on the performance of different electrodes and their interaction with acidic and alkaline media across a range of electrochemical conditions. This Perspective integrates recent advancements to present a thorough framework for understanding the mechanisms underlying the activity-stability relationship, offering strategies for the rational design of next-generation OER catalysts that successfully meet the dual demands of activity and durability.

Designing Ru-B-Cr Moieties to Activate the Ru Site for Acidic Water Electrolysis under Industrial-Level Current Density

Developing highly efficient non-iridium-based active sites for acidic water splitting is still a huge challenge. Herein, unique Ru-B-Cr moieties have been constructed in RuO2 nanofibers (NFs) to activate Ru sites for water electrolysis, which overcomes the bottleneck of RuO2-based catalysts usually possessing low activity for the hydrogen evolution reaction (HER) and poor stability for the oxygen evolution reaction (OER). The fabricated Cr, B-doped RuO2 NFs exhibit low overpotentials of 205 and 379 mV for acidic HER and OER at 1 A cm-2 with outstanding stability lasting 1000 and 188 h, respectively. The assembled acidic electrolyzer also possesses great hydrogen production efficiency and durability at a high current density. Experimental and theoretical explorations reveal that the formation of Ru-B-Cr moieties effectively optimizes the atomic configurations and modulates the adsorption/desorption free energy of reaction intermediates to achieve exceptional HER and OER performance.

Boosting the durability of RuO2 via confinement effect for proton exchange membrane water electrolyzer

Ruthenium dioxide has attracted extensive attention as a promising catalyst for oxygen evolution reaction in acid. However, the over-oxidation of RuO2 into soluble H2RuO5 species results in a poor durability, which hinders the practical application of RuO2 in proton exchange membrane water electrolysis. Here, we report a confinement strategy by enriching a high local concentration of in-situ formed H2RuO5 species, which can effectively suppress the RuO2 degradation by shifting the redox equilibrium away from the RuO2 over-oxidation, greatly boosting its durability during acidic oxygen evolution. Therefore, the confined RuO2 catalyst can continuously operate at 10 mA cm-2 for over 400 h with negligible attenuation, and has a 14.8 times higher stability number than the unconfined RuO2 catalyst. An electrolyzer cell using the confined RuO2 catalyst as anode displays a notable durability of 300 h at 500 mA cm-2 and at 60 °C. This work demonstrates a promising design strategy for durable oxygen evolution reaction catalysts in acid via confinement engineering.

Atomically Dispersed Vanadium-Induced Ru-V Dual Active Sites Enable Exceptional Performance for Acidic Water Oxidation

Regulating the catalytic reaction pathway to essentially break the activity/stability trade-off that limits RuO2 and thus achieves exceptional stability and activity for the acidic oxygen evolution reaction (OER) is important yet challenging. Herein, we propose a novel strategy of incorporating atomically dispersed V species, including O-bridged V dimers and V single atoms, into RuO2 lattices to trigger direct O-O radical coupling to release O2 without the generation of *OOH intermediates. Vn-RuO2 showed high activity with a low overpotential of 227 mV at 10 mA cm-2 and outstanding stability during a 1050 h test in acidic electrolyte. Operando spectroscopic studies and theoretical calculations revealed that compared with the V single atom-doping case, the introduction of the V dimer into RuO2 further decreases the Ru-V atomic distance and weakens the adsorption strength of the *O intermediate to the active V site, which supports the more energetically favorable oxygen radical coupling mechanism (OCM). Furthermore, the highly asymmetric Ru-O-V local structure stabilizes the surface Ru active center by lowering the valence state and increasing the resistance against overoxidation, which result in outstanding stability. This study provides insight into ways of increasing the intrinsic catalytic activity and stability of RuO2 by atomically dispersed species modification.

Unveiling the Structure and Dissociation of Interfacial Water on RuO2 for Efficient Acidic Oxygen Evolution Reaction

Understanding the structure and dynamic process of interfacial water molecules at the catalyst-electrolyte interface on acidic oxygen evolution reaction (OER) kinetics is highly desirable for the development of proton exchange membrane water electrolyzers. Herein, we construct a series of p-block metal elements (Ga, In, Sn) doped RuO2 catalysts with manipulated electronic structure and Ru-O covalency to investigate the effect of electrochemical interfacial engineering on the improvement of acidic OER activity. Associated with operando attenuated total reflectance surface-enhanced infrared absorption spectroscopy measurements and theoretical analysis, we uncover the free-H2O enriched local environment and dynamic evolution from 4-coordinated hydrogen-bonded water and 2-coordinated hydrogen-bonded water to free-H2O on the surface of Ga-RuO2, are responsible for the optimized connectivity of hydrogen bonding network in the electrical double layer by promoting solvent reorganization. In addition, the structurally ordered interfacial water molecules facilitate high-efficiency proton-coupled electron transfer across the interface, leading to reduced energy barrier of the follow-up dissociation process and enhanced acidic OER performance. This work highlights the key role of structure and dynamic process of interfacial water for acidic OER, and demonstrates the electrochemical interfacial engineering as an efficient strategy to design high-performance electrocatalysts.