2D MXenes polar catalysts for multi-renewable energy harvesting applications

Anti-interference detection of antibiotic resistance genes via tetrahedral DNA framework-velcro capturing Py-HOF@Ti3C2 MXene

Methicillin-resistant Staphylococcus aureus (MRSA) is rapidly spreading worldwide. Concurrently, numerous antibiotic resistance genes (ARGs) have escaped into complex natural environments, particularly in water environment. Among these, mecA is one of the most prevalent ARGs identified in MRSA. Consequently, the development of robust analytical methods for detecting ARGs is critically important. This study effectively designed and constructed a tetrahedral DNA framework array termed "Velcro". By initiating the catalytic hairpin assembly (CHA) of the target loop through mecA, the "stickiness" of Velcro is stimulated, enabling efficient capture of, the composite of hydrogen-bonded organic frameworks (HOFs) with aggregation-induced electrochemiluminescence (AIECL) activity and co-reaction accelerator Ti3C2 MXene (TCM). Concurrently, the stable DNA framework can effectively withstand various environmental interferences, including bacterial invasion and enzymatic degradation, thereby enabling the sensitive detection and analysis of antibiotic resistance genes in complex environments. The linear range of the proposed ECL Biosensor for ARGs (mecA) detection was 0.01 pM to 10 nM, with a detection limit of 2.3 fM. This research proposes a novel approach for tracing this new type of genetic contamination and holds significant reference value for the scientific application of antibiotics.

MXene-Mediated Electronic State Engineering of Nickel Hydroxide for Efficient Piezo-Catalytic Hydrogen Peroxide Synthesis

The piezo-catalytic synthesis of hydrogen peroxide (H2O2) offers a sustainable alternative to the traditional anthraquinone process by enhancing both the water oxidation reaction (WOR) and oxygen reduction reaction (ORR). However, conventional high-dielectric-constant piezoelectric materials, despite their superior piezoelectric responses, generally feature wide band gaps, low electrical conductivity, and a limited number of active sites─catalytically unfavorable characteristics that restrict their piezocatalytic efficiency. To address this, we developed a 2D Ni(OH)2-Ti3C2Tx MXene composite for efficient H2O2 production in pure water. The Ti3C2Tx MXene modifies the electronic states of Ni(OH)2, enhancing its deprotonation ability (Ni2+ to Ni3+) and creating hypervalent nickel active sites that boost H2O2 synthesis. Theoretical and experimental studies confirm that H2O2 generation occurs through combined WOR and ORR pathways, with ORR being dominant. The hierarchical 2D nanosheet structure facilitates crystal deformation under mechanical stress, amplifying the piezoelectric effect and reducing the energy input required for redox reactions. As a result, the Ni(OH)2-Ti3C2Tx composite achieves an impressive H2O2 yield of 351.1 μmol·g-1·h-1. This work provides a novel design strategy for high-performance piezo-catalysts in sustainable H2O2 production.

Two-in-one strategy to enhance the stability of Ti3C2Tx in transition metal ion solutions

Although MXenes have attracted significant attention across diverse fields, they exhibit a pronounced susceptibility to oxidation in aqueous environments, with oxidation significantly accelerated in the presence of transition metal ions (TMI) such as Fe3+ and Cu2+. This limitation impedes the synthesis of transition metal compounds/MXene-based composites and their potential for functional applications. In this study, we elucidate the mechanism of accelerated oxidation of Ti3C2Tx is that Fe3+ promotes the electron loss in Ti3C2Tx, thus leading to an increased production of hydroxyl radicals (OH) to oxidize Ti3C2Tx. Furthermore, a rational two-in-one strategy is provided with adding electron-rich ethylenediaminetetraacetic acid disodium zinc salt (ZnNa2EDTA) to enhance the stability of Ti3C2Tx by defect filling and electron donation. Consequently, the production of OH is significantly reduced and thus Ti3C2Tx remains well-preserved in the presence of Fe3+, which has also effectively enhanced the oxidation stability of Ti3C2Tx in the presence of Cu2+. This work is expected to pave a new pathway for targeted applications with coexisting Ti3C2Tx and TMI.

Meter-Scale Wearable Multifunctional Core-Shell Nanofiber Textiles for Ultra-Broadband Electromagnetic Interference Shielding and Infrared Stealth

The rapid development of wireless communication and infrared (IR) detection technologies has generated an increasing demand for large-size high-performance wearable electromagnetic interference (EMI) shielding and IR stealth textiles. Herein, meter-scale MXene/graphene oxide (MG)@monstera nanocellulose (MC) core-shell nanofiber textiles are fabricated for the first time using a multi-stage cryogenic drying-assisted coaxial wet spinning assembly strategy, with MG as the conductive composite core and MC as the organic skeleton shell. The highly aligned shell and dense core endow the nanofibers with a great toughness of ≈39.6 MJ m-3, a strong strength >≈180 MPa, and a high conductivity of 6.4 × 103 S m-1. The textiles exhibit unprecedented ultra-broadband EMI shielding performance covering gigahertz and terahertz bands, with optimal shielding effectiveness up to 84 and 85 dB in the band of 8.2-26.5 GHz and 0.3-1.5 THz, respectively, at only 185 µm thick. Superb IR stealth performance in the near- and mid-IR ranges is also achieved, benefitting from their good heat resistance and low IR emissivity. Furthermore, the textiles also demonstrate excellent dyeability, flame retardancy, Joule heating, and stress-sensing properties. Such scalable prepared core-shell nanofiber textiles with superior comprehensive performance have broad application prospects in future smart wearable protective devices.

Multienergy Codriven Electron Transfer Across the Nano-Bio Interface for Efficient Photobiocatalysis

Integrating biocatalysis with nanophotocatalysis provides a promising pathway to address the knotty environmental and energy problems. However, energy loss during the transfer of extracellular electrons across the nano-bio interface seriously limits the efficiency of whole-cell-based photobiocatalytic systems. Herein, we demonstrate an integrated multienergy codriven reaction platform containing BaTiO3 nanoparticles (BTO) for harvesting mechanical energy from flowing water to elevate the interfacial electric field, BiVO4 quantum dots (BQD) for harvesting light energy to generate photocarriers, and Geobacter sulfurreducens (GS) for accepting photoelectrons to accomplish the biocatalytic reactions. The synergism between the piezoelectric and photoelectric fields significantly promotes the cross-membrane transport of photoelectrons, contributing to enhanced acetate metabolism, electron transfer, and energy synthesis of GS microbes. Such well-designed BQD/BTO-GS hybrids result in the simultaneous degradation of organic contaminants and detoxification of heavy metals in water with approximately 100% treatment efficiency. The rates of tetracycline (TC) oxidation and Cr(VI) reduction are determined to be 32.8 and 9.58 times higher than that of GS biocatalysis, respectively. Our photobiocatalytic platform exhibits an exceptional apparent quantum yield of 15.54% at 400 nm, exceeding those of most reported abiotic-biotic photobiocatalytic systems. Further investigation verifies the extensibility of our multienergy codriven strategy to the other nano-bio hybrids for enhancing the biocatalytic efficiencies (such as methanogenesis, CO2 fixation, and denitrification), thus offering an inspiring platform for energy and environmental applications. This work not only presents crucial insights into the mechanism of the water-energy nexus but also provides a paradigm for the construction of sustainable reaction systems via multienergy harnessing.

Synergizing microfluidics and plasmonics: advances, applications, and future directions

In the past decade, interest in nanoplasmonic structures has experienced significant growth, owing to rapid advancements in materials science and the evolution of novel nanofabrication techniques. The activities in the area are not only leading to remarkable progress in specific applications in photonics, but also permeating to and synergizing with other fields. This review delves into the symbiosis between nanoplasmonics and microfluidics, elucidating fundamental principles on nanophotonics centered on surface plasmon-polaritons, and key achievements arising from the intricate interplay between light and fluids at small scales. This review underscores the unparalleled capabilities of subwavelength plasmonic structures to manipulate light beyond the diffraction limit, concurrently serving as fluidic entities or synergistically combining with micro- and nanofluidic structures. Noteworthy phenomena, techniques and applications arising from this synergy are explored, including the manipulation of fluids at nanoscopic dimensions, the trapping of individual nanoscopic entities like molecules or nanoparticles, and the harnessing of light within a fluidic environment. Additionally, it discusses light-driven fabrication methodologies for microfluidic platforms and, contrariwise, the use of microfluidics in the fabrication of plasmonic nanostructures. Pondering future prospects, this review offers insights into potential future developments, particularly focusing on the integration of two-dimensional materials endowed with exceptional optical, structural and electrical properties, such as goldene and borophene, which enable higher carrier densities and higher plasmonic frequencies. Such advancements could catalyze innovations in diverse applications, including energy harvesting, advanced photothermal cancer therapies, and catalytic processes for hydrogen generation and CO2 conversion.

Covalent Organic Frameworks for Boosting H2O2 Photosynthesis via the Synergy of Multiple Charge Transfer Channels and Polarized Field

Covalent organic frameworks (COFs) serve as one of the most promising candidates for hydrogen peroxide (H2O2) photosynthesis, while attaining high-performance COFs remains a formidable challenge due to the insufficient separation of photogenerated charges. Here, through the rational design of bicarbazole-based COFs (Cz-COFs), we showcase the first achievement in piezo-photocatalytic synthesis of H2O2 using COFs. Noteworthily, the ethenyl group-modified Cz-COFs (COF-DH-Eth) demonstrates a record-high yield of H2O2 (9212 μmol g-1 h-1) from air and pure water through piezo-photocatalysis, which is ca. 2.5 times higher than that of pristine Cz-COFs without ethenyl groups (COF-DH-H) under identical condition and COF-DH-Eth without ultrasonic treatment. The H2O2 production rate originates from the synergistic effect between an ultrasonication-induced polarized electric field and the spatially separated multiple charge transfer channels, which significantly promote the utilization of photogenerated electrons by directional transfer from bicarbazole groups to the ethenyl group-modified benzene rings. Several Cz-COFs and bifluorenylidene-based COFs (COF-BFTB-H) with similar twisted monomers exhibit obvious piezoelectric performance for promoting H2O2 generation, signifying that organic ligands with a twistable structure play a crucial role in creating broken symmetry structures, thereby establishing piezoelectric properties in COFs.

Construction of Mo2TiC2Tx MXene as a Superior Carrier to Support Ru-CuO Heterojunctions for Improving Alkaline Hydrogen Oxidation

The sluggish anodic hydrogen oxidation reaction (HOR) of the hydroxide exchange membrane fuel cell (HEMFC) is a significant barrier for practical implementation. Herein, we designed a catalyst of Mo2TiC2Tx MXene-supported Ru-CuO heterojunctions (named as Ru-CuO/MXene). The XPS spectra and the d-band center data of the different amounts of Cu of the Ru-CuO/MXene suggested that there existed a strongly electronic metal-support interaction between the active species and the substrate with MXene as the excellent carrier. Furthermore, the in situ electrochemical experimental results (operando electrochemical impedance spectroscopy and in situ electrochemical Raman spectroscopy) and density functional theory (DFT) calculations showed that Ru and CuO were the optimal adsorption sites for surface species *H and *OH, respectively, endowing Ru-CuO/MXene with the ability to weaken the hydrogen binding energy (HBE) and strengthen the hydroxide binding energy (OHBE). Remarkably, the optimized catalyst modified an impressive HOR activity in the 0.1 M KOH electrolyte with a kinetic and an exchange current density of 7.63 and 1.37 mA cm-2 at 50 mV overpotential (vs. RHE), respectively, which were 1.98- and 1.2-fold higher than those of commercial Pt/C (20 wt %). Finally, the as-prepared catalyst also exhibited superior durability and exceptional CO antipoisoning ability in 1000 ppm of the CO/H2-saturated 0.1 M KOH electrolyte. This work provides an inspiring strategy to design high-activity HOR electrocatalyst-based metallic Ru in alkaline environments.

Facile synthesis of defective ZnS-ZnO composite nanosheets for efficient piezocatalytic H2 production

A facile approach was developed for the synthesis of ultrathin ZnS-ZnO nanosheets. By simply manipulating the synthesis temperature, ZnS-ZnO composite nanosheets with sulfur vacancies were successfully obtained using ZnS(en)0.5 as the precursor. The formation of the ZnS-ZnO composite leads to the creation of a heterojunction at the interface between the two materials, which enhances the separation of piezogenerated electrons and holes. Additionally, sulfur vacancies are concurrently introduced into the ZnS lattice during the heat treatment process. This defective ZnS with sulfur vacancies exhibits a narrowed bandgap and low excitation energy. Consequently, the defective ZnS-ZnO composite nanosheets demonstrate much higher piezocatalytic activity compared to ZnS and ZnO catalysts, surpassing the performance of most reported piezocatalysts. Furthermore, the ZnS-ZnO composite nanosheets maintain stability over five cycles of catalytic reactions. The study offers a promising approach for enhancing piezocatalytic performance for H2 production.

1D MXenes: Synthesis, Properties, and Applications

The fascinating properties and versatile nature of 2D MXenes have generated significant interest in the scientific community. This has led to extensive research on expanding these materials into 1D and 0D forms. This review investigates the synthesis, properties, and applications of 1D MXenes, elucidating their potential across various fields. 1D MXenes, including nanowires, nanoribbons, nanorods, and nanotubes, inherit the remarkable properties of their 2D counterparts while also exhibiting unique anisotropic characteristics that enhance their performance in various applications. The review explores various methods for synthesizing 1D MXenes and examines their structural, electronic, and optical properties. The transition from 2D to 1D results in MXenes that offer superior properties, which are advantageous for various next-generation systems. The increased aspect ratio and surface area of 1D MXenes broaden their usage in energy storage, photothermal therapy, oxygen evolution reactions (OER), hydrogen evolution reactions (HER), oxygen reduction reactions (ORR), microwave absorption, filtration membranes, gas sensors, metal detection, etc. The review also addresses the challenges associated with 1D MXenes, such as limited synthesis methods, scalable production, size customization, preservation of structural integrity, and stability. Furthermore, potential opportunities and future directions in the field of 1D MXenes have also been proposed.

Customized Ultrathin Oxygen Vacancy-Rich Bi2W0.2Mo0.8O6 Nanosheets Enabling a Stepwise Charge Separation Relay and Exposure of Lewis Acid Sites toward Broad-Spectrum Photothermal Catalysis

Designing robust photocatalysts with broad light absorption, effective charge separation, and sufficient reactive sites is critical for achieving efficient solar energy conversion. However, realizing these aims simultaneously through a single material modulation approach poses a challenge. Here, a 2D ultrathin oxygen vacancy (Ov)-rich Bi2W0.2Mo0.8O6 solid solution photocatalyst is designed and fabricated to tackle the dilemma through component and structure optimization. Specifically, the construction of a solid solution with ultrathin structure initially facilitates the separation of photoinduced electron-hole pairs, while the introduction of Ov strengthens such separation. In the meantime, the presence of Ov extends light absorption to the NIR region, triggering a photothermal effect that further enhances the charge separation and accelerates the redox reaction. As such, photoinduced charge carriers in the Ov-Bi2W0.2Mo0.8O6 are separated step by step via the synergistic action of 2D solid solution, OV, and solar heating. Furthermore, the introduction of OV exposes surface metal sites that serve as reactive Lewis acid sites, promoting the adsorption and activation of toluene. Consequently, the designed Ov-Bi2W0.2Mo0.8O6 reveals an enhanced photothermal catalytic toluene oxidation rate of 2445 µmol g-1 h-1 under a wide spectrum without extra heat input. The performance is 9.0 and 3.9 times that of Bi2WO6 and Bi2MoO6 nanosheets, respectively.

Structure-Controlled Interpenetrated MOF@COF via C-C Linkage for Enhanced Photocatalysis

Diversifying the connecting junctions will be feasible for the controllable collaboration of metal-organic frameworks (MOFs) and covalent organic frameworks (COFs) to rationally design multifunction-integrated heterostructures with enhanced performance, yet it is in the nascent stage. Herein, by intelligently exploiting the polymerization of vinyl group, C-C bond is innovatively introduced to construct the core-shell MOF@COF heterostructures with adjustable shell thickness and rare interpenetrated structure. The unique structure endows prepared C-C-linked MIL-68@COF-Vs with more superior visible-light harvesting and photogenerated carrier separation capability, leading to significantly higher photocatalytic activity and faster degradation rate than pristine MIL-68-C=Cs, COF-V, and imine-linked MIL-68-NH2@COF-V. Further, the customized MIL-68@COF-V is in situ grown as reusable films with dramatically boosted performance under ambient conditions, which realize the highly efficient degradation of tetracycline within 15 min (96.5 %), rhodamine 6G within 25 min (97.6 %), and phenol within 40 min (95.3 %) by solar drive. This work exhibits the distinctive advantages of C-C junction in the MOF@COF construction, and highlights the application prospect of rational-designed heterostructure in the treatment of persistent organic pollutants.

Harnessing Holey MXene/Graphene Oxide Heterostructure to Maximize Ion Channels in Lamellar Film for High-Performance Capacitive Deionization

2D Ti3C2Tx MXene-based film electrodes with metallic conductivity and high pseudo-capacitance are of considerable interest in cutting-edge research of capacitive deionization (CDI). Further advancement in practical use is however impeded by their intrinsic limitations, e.g., tortuous ion diffusion pathway of layered stacking, vulnerable chemical stability, and swelling-prone nature of hydrophilic MXene nanosheet in aqueous environment. Herein, a nanoporous 2D/2D heterostructure strategy is established to leverage both merits of holey MXene (HMX) and holey graphene oxide (HGO) nanosheets, which optimize ion transport shortcuts, alleviate common restacking issues, and improve film's mechanical and chemical stability. In this design, the nanosized in-plane holes in both handpicked building blocks build up ion diffusion shortcuts in the composite laminates to accelerate the transport and storage of ions. As a direct outcome, the HMX/rHGO films exhibit remarkable desalination capacity of 57.91 mg g-1 and long-term stability in 500 mg L-1 NaCl solution at 1.2 V. Moreover, molecular dynamics simulations and ex situ wide angle X-ray scattering jointly demonstrate that the conductive 2D/2D networks and ultra-short ion diffusion channels play critical roles in the ion intercalation/deintercalation process of HMX/rHGO films. The study paves an alternative design concept of freestanding CDI electrodes with superior ion transport efficiency.

Efficient Catalytic Production of Reactive Oxygen Species through Piezoelectricity in Bismuth Sulfide Rich in Sulfur Vacancies

Sulfur (S) vacancies in metal sulfides are of interest in electrocatalysis and photoelectronics, but their effect on the generation of reactive oxygen species (ROS) during mechanical catalysis is unclear. This study investigates the impact of S-vacancies in defective bismuth sulfide (Bi2S3-x) on ROS production under ultrasonic irradiation and organic contaminant decomposition. S-vacancies disrupt the centrosymmetric structure of intrinsic Bi2S3, inducing piezoelectric effects and enhancing the electrical energy in Bi2S3-x. The positively charged S-vacancies in Bi2S3-x promote the separation of ultrasound-activated electron-hole pairs by capturing electrons. As a result, the optimal rate of H2O2 formation and the reaction rate constant for degrading Rhodamine B dye on Bi2S3-x are found to be 1.9 and 37 times higher, respectively, than those on Bi2S3 under ultrasonic irradiation. The nonzero catalytic efficiency in centrosymmetric Bi2S3 is due to the flexoelectric catalytic effect from nonuniform strain. These results guide the piezocatalyst design and elucidate mechanical catalysis mechanisms.

Fabrication Methods, Structural, Surface Morphology and Biomedical Applications of MXene: A Review

Recently, two-dimensional (2-D) layered materials have revealed outstanding properties and play a crucial role for numerous advanced applications. The emerging transition metal carbides and nitrides, known as MXene with empirical formula Mn+1XnTx, have generated widespread attention and demonstrated impressive potential in various fields. The fabrication of 2-D novel MXene and its composites and their characterizations are applicable to vast applications in different areas such as energy storage, gas sensors, catalysis, and biomedical applications. In this review, the main focus is on the various synthesis methods, their properties, and biomedical applications. This review provides detailed illustrations of MXenes for many biomedical applications, including bioimaging, drug delivery, therapies, biosensors, tissue engineering, and antibacterial reagents. The challenges and future prospects were highlighted in a comprehensive manner, and the existing problems and potential for MXene-based biomaterials were analyzed with the goal of accelerating their use in the biomedical field.

Ag+-Induced Assembly of Pt Clusters for Photocatalytic Hydrogen Production

Cluster-assembled nanowires provide a unique strategy for the preparation of high-performance nanostructures. However, existing preparations are limited by complex processes and harsh reaction conditions. Here, Ag+ ions were utilized as a novel structure-directing agent to generate the self-assembly of Pt clusters to form ultrafine nanowires with a diameter of less than 5 nm. Electrospray ionization mass spectrometry (ESI-MS) and extended X-ray absorption fine structure (EXAFS) characterizations demonstrated that every Ag+ bridged two [Pt3(CO)3(μ2-CO)3]n2- clusters through coordination and formed a sandwich-like structure of [Pt3(CO)3(μ2-CO)3]nAg[Pt3(CO)3(μ2-CO)3]m3-. As a result, multiple sandwich-like structures of [Pt3(CO)3(μ2-CO)3]nAg[Pt3(CO)3(μ2-CO)3]m3- were established by Ag+ to form Pt nanowire superstructures {[Pt3(CO)6]nAg[Pt3(CO)6]mAg[Pt3(CO)6]x}∞ (abbreviated as Ag-Pt NWS). Our results demonstrate that the Pt nanowire superstructures showed promising cocatalytic performance for photocatalytic H2 production with the involvement of Ag+, which promises a desirable way to develop advanced functional nanomaterials.

Strain-Induced Photocatalytic H2 Production over BiVO4 in Pure Water without Any Cocatalyst

In this study, BiVO4 nanosheets (BiVO4-NS) were prepared by a facile hydrothermal method. It is found that sonication-induced strain can effectively promote the H2 production over BiVO4-NS in the presence of pure water without any cocatalysts. With the assistance of the sonication, the H2 production over BiVO4-NS is 1.344 mmol·g-1 after 3 h simulated sunlight irradiation, which is 24.8 times higher than that of BiVO4-NS without sonication (0.054 mmol·g-1). In addition, the products of water oxidation are determined to be hydroxyl radicals and hydrogen peroxide. Moreover, BiVO4-NS also shows obviously enhanced photoactivity than that of the commercially available BiVO4 nanoparticles (BiVO4-C). The improved photoactivity of BiVO4-NS is attributed to the effective charge separation and low charge transfer resistance. The underlying mechanism of sonication-promoted water splitting is investigated by a variety of controlled experiments. The results show that ultrasonic waves can produce obvious strain inside the sample, which results in lattice distortion of BiVO4. Therefore, the conduction band of BiVO4 is obviously negative shifted, which is beneficial for H2 production. In addition, the strain in BiVO4 also produces local polarization of the sample, which effectively promotes the charge transfer and separation process. It is hoped that our study could provide a new strategy for achieving efficient photocatalytic water splitting.

Recent Advances of CeO2-Based Composite Materials for Photocatalytic Applications

Photocatalysis has the advantages of practical, sustainable and environmental protection, so it plays a significant role in energy transformation and environmental utilization. CeO2 has attracted widespread attention for its unique 4 f electrons, rich defect structures, high oxygen storage capacity and great chemical stability. In this paper, we review the structure of CeO2 and the common methods for the preparation of CeO2-based composites in the first part. In particular, we highlight the co-precipitation method, template method, and sol-gel method methods. Then, in the second part, we introduce the application of CeO2-based composites in photocatalysis, including photocatalytic CO2 reduction, hydrogen production, degradation, selective organic reaction, and photocatalytic nitrogen fixation. In addition, we discuss several modification techniques to improve the photocatalytic performance of CeO2-based composites, such as elemental doping, defect engineering, constructing heterojunction and morphology regulation. Finally, the challenges faced by CeO2-based composites are analyzed and their development prospects are prospected. This review provides a systematic summary of the recent advance of CeO2-based composites in the field of photocatalysis, which can provide useful references for the rational design of efficient CeO2-based composite photocatalysts for sustainable development.

Directional Charge Pumping from Photoactive P-doped CdS to Catalytic Active Ni2P via Funneled Bandgap and Bridged Interface for Greatly Enhanced Photocatalytic H2 Evolution

Loading cocatalysts onto semiconductors is one of the most popular strategies to inhibit charge recombination, but the efficiency is generally hindered by the localized built-in electric field and the weakly connected interface. Here, this work designs and synthesizes a 1D P-doped CdS nanowire/Ni2P heterojunction with gradient doped P to address the challenges. In the composite, the gradient P doping not only creates a funneled bandgap structure with a built-in electric field oriented from the bulk of P-CdS to the surface, but also facilitates the formation of a tightly connected interface using the co-shared P element. Consequently, the photogenerated charge carriers are enabled to be pumped from inside to surface of the P-CdS and then smoothly across the interface to the Ni2P. The as-obtained P-CdS/Ni2P displays high visible-light-driven H2 evolution rate of ≈8265 µmol g-1 h-1, which is 336 times and 120 times as that of CdS and P-CdS, respectively. This work is anticipated to inspire more research attention for designing new gradient-doped semiconductor/cocatalyst heterojunction photocatalysts with bridged interface for efficient solar energy conversion.

Synergistic barium titanate/MXene composite as a high-performance piezo-photocatalyst for efficient dye degradation

Piezo-photocatalysis combines photocatalysis and piezoelectric effects to enhance catalytic efficiency by creating an internal electric field in the photocatalyst, improving carrier separation and overall performance. This study presents a high-performance piezo-photocatalyst for efficient dye degradation using a synergistic barium titanate (BTO)-MXene composite. The composite was synthesized via a facile method, combining the unique properties of BTO nanoparticles with the high conductivity of MXene. The structural and morphological analysis confirmed the successful formation of the composite, with well-dispersed BTO nanoparticles on the MXene surface. The piezo-photocatalytic activity of the composite was evaluated using a typical dye solution (Rhodamine B: RhB) under ultraviolet irradiation and mechanical agitation. The results revealed a remarkable enhancement in dye degradation (90 % in 15 min for piezo-photocatalysis) compared to individual stimuli (58.2 % for photocatalysis and 95.8 % in 90 min for piezocatalysis), highlighting the synergistic effects between BTO and MXene. The enhanced catalytic performance was attributed to the efficient charge separation and transfer facilitated by the composite's structure, leading to increased reactive species generation and dye molecule degradation. Furthermore, the composite exhibited excellent stability and reusability, showcasing its potential for practical applications in wastewater treatment. Overall, this work represents a promising strategy for designing high-performance synergistic catalysts, addressing the pressing need for sustainable solutions in environmental remediation.

Calcium Single Atom Confined in Nitrogen-Doped Carbon-Coupled Polyvinylidene Fluoride Membrane for High-Performance Piezocatalysis

A piezoelectric polymer membrane based on single metal atoms was demonstrated to be effective by anchoring isolated calcium (Ca) atoms on a composite of nitrogen-doped carbon and polyvinylidene fluoride (PVDF). The addition of Ca-atom-anchored carbon nanoparticles not only promotes the formation of the β phase (from 29.8 to 56.3%), the most piezoelectrically active phase, in PVDF, but also introduces much higher porosity and hydrophilicity. Under ultrasonic excitation, the fabricated catalyst membrane demonstrates a record-high and stable dye decomposing rate of 0.11 min-1 and antibacterial efficiencies of 99.8%. Density functional theory calculations reveal that the primary contribution to catalytic activity arises from single-atom Ca doping and that a possible synergistic effect between PVDF and Ca atoms can improve the catalytic performance. It is shown that O2 molecules can be easily hydrogenated to produce ·OH on Ca-PVDF, and the local electric field provided by the β-phase-PVDF might enhance the production of ·O2-. The proposed polymer membrane is expected to inspire the rational design of piezocatalysts and pave the way for the application of piezocatalysis technology for practical environmental remediation.

Synergizing Pyroelectric Catalysis and Enzyme Catalysis: Establishing a Reciprocal and Synergistic Model to Enhance Anti-Tumor Activity

Nanozyme activity is greatly weakened by the microenvironment and multidrug resistance of tumor cells. Hence, a bi-catalytic nanoplatform, which promotes the anti-tumor activity through "charging empowerment" and "mutual complementation" processes involved in enzymatic and pyroelectric catalysis, by loading ultra-small nanoparticles (USNPs) of pyroelectric ZnSnO3 onto MXene nanozyme (V2CTx nanosheets), is developed. Here, the V2CTx nanosheets exhibit enhanced peroxidase activity by reacting V3+ with H2O2 to generate toxic ·OH, accelerated by the near-infrared (NIR) light mediated heat effect. The resulting V4+ is then converted to V3+ by oxidizing endogenous glutathione (GSH), realizing an enzyme-catalyzed cycle. However, the cycle will lose its persistence once GSH is insufficient; nevertheless, the pyroelectric charges generated by ZnSnO3 USNPs continuously support the V4+/V3+ conversion and ensure nanoenzyme durability. Moreover, the hyperthermia arising from the V2CTx nanosheets by NIR irradiation results in an ideal local temperature gradient for the ZnSnO3 USNPs, giving rise to an excellent pyroelectric catalytic effect by promoting band bending. Furthermore, polarized charges increase the tumor cell membrane permeability and facilitate nanodrug accumulation, thereby resolving the multidrug resistance issue. Thus, the combination of pyroelectric and enzyme catalysis together with the photothermal effect solves the dilemma of nanozymes and improves the antitumor efficiency.

Exceptional piezocatalytic H2 production of nitrogen-doped TiO2@carbon nanosheets induced by engineered piezoelectricity

Piezocatalytic hydrogen evolution is a promising strategy to generate sustainable energy. In this report, nitrogen-doped (N-doped) TiO2@ carbon nanosheets (N-TiO2@C NSs) was successfully synthesized using C3N4 as a multifunctional template. During the synthesis, the two-dimensional (2D) architecture of C3N4 nanosheets directed the synthesis of TiO2 nanosheets. In addition, nitrogens of C3N4 were doped into the TiO2 lattice. Simultaneously, C3N4 was transformed into N-doped carbon nanosheets. N doping broke the crystal symmetry of TiO2, which endowed TiO2 with promising piezoelectric properties. The N-doped carbon nanosheets derived from C3N4 improved charge carrier separation efficiency and served as a flexible support to inhibit structural damage under sonication. Therefore, the N-TiO2@C NSs exhibited highly efficient activity for piezocatalytic H2 production (6.4 mmol·g-1·h-1) in the presence of methanol, much higher than those of the previously reported piezocatalysts. Our method is hoped to provide a new strategy for designing highly efficient piezocatalysts.

Efficient degradation of organics by ultrasonic piezoelectric effect on CuO-BTO/AFC composite

The recombination of photoexcited electron-hole pairs greatly limits the degradation performance of photocatalysts. Ultrasonic cavitation and internal electric field induced by the piezoelectric effect are helpful for the separation of electron-hole pairs and degradation efficiency. The activated foam carbon (AFC) owing to its high surface area is often used as the substrate to grow catalysts to provide more reactive active sites. In this work, CuO@BaTiO3(CuO@BTO) heterostructure is prepared by hydrothermal method on the surface of AFC to investigate the ultrasonic piezoelectric catalysis effect. X-ray diffraction (XRD), Raman spectroscopy, energy dispersive x-ray spectroscopy (EDS) and scanning electron microscopy (SEM) were used to analyze the structure and morphology of CuO-BTO/AFC composite. It is found that the CuO-BTO/AFC composite exhibits excellent piezo-catalytic performance for the degradation of organics promoted by ultrasonic vibration. The CuO-BTO/AFC composite can decompose methyl orange and methylene blue with degradation efficiency as high as 93.9% and 97.6% within 25 min, respectively. The mechanism of piezoelectricity enhanced ultrasound supported catalysis effect of system CuO-BTO/AFC is discussed. The formed heterojunction structure between BTO and CuO promotes the separation of positive and negative charges caused by the piezoelectric effect.

Harvesting Vibration Energy for Efficient Cocatalyst-Free Sonocatalytic H2 Production over Magnetically Separable Ultra-Low-Cost Fe3O4

The cavitation effect is an important geochemical phenomenon, which generally exists under strong hydrodynamic conditions. Therefore, developing an economical and effective sonocatalyst becomes a vital method in capitalizing on the cavitation effect for energy generation. In this study, we first report a novel Fe3O4 sonocatalyst that can be easily separated using a magnetic field and does not require any additional cocatalysts for H2 production from H2O. When subjected to ultrasonic vibration, this catalyst achieves an impressive H2 production rate of up to 175 μmol/h/USD (where USD stands for dollars), surpassing most previously reported mechanical catalytic materials. Furthermore, the ease and efficiency of separating this catalyst using an external magnetic field, coupled with its effortless recovery, highlight its significant potential for practical applications. By addressing the key limitations of conventional sonocatalysts, our study not only demonstrates the feasibility of using Fe3O4 as a highly efficient sonocatalyst but also showcases the exciting possibility of using a new class of magnetically separable sonocatalysts to productively transform mechanical energy into chemical energy.

Construction of MXene/Bi2WO6 Schottky Junction for Highly Efficient Piezocatalytic Hydrogen Evolution and Unraveling Mechanism

For the first time, a series of MXene (Ti3C2Tx)/Bi2WO6 Schottky junction piezocatalysts were constructed, and the piezocatalytic hydrogen evolution activity was explored. Optimal Ti3C2Tx/Bi2WO6 exhibits the highest piezocatalytic hydrogen evolution rate of 764.4 μmol g-1 h-1, which is nearly 8 times higher than that of pure Ti3C2Tx and twice as high as that of Bi2WO6. This value also surpasses that of most recently reported typical piezocatalysts. Moreover, related experimental results and density functional theory calculations reveal that Ti3C2Tx/Bi2WO6 can provide unique channels for efficient electron transfer, enhance piezoelectric properties, optimize the adsorption Gibbs free energy of water, reduce activation energy for hydrogen atoms, endow robust separation capacity of charge carrier, and restrict the electron-hole recombination rate, thus significantly promoting the efficiency of hydrogen evolution reaction. Ultimately, we have unraveled an innovative piezocatalytic mechanism. This work broadens the scope of MXene materials in a sustainable energy piezocatalysis application.

MXene-based electrochemical devices applied for healthcare applications

The initial part of the review provides an extensive overview about MXenes as novel and exciting 2D nanomaterials describing their basic physico-chemical features, methods of their synthesis, and possible interfacial modifications and techniques, which could be applied to the characterization of MXenes. Unique physico-chemical parameters of MXenes make them attractive for many practical applications, which are shortly discussed. Use of MXenes for healthcare applications is a hot scientific discipline which is discussed in detail. The article focuses on determination of low molecular weight analytes (metabolites), high molecular weight analytes (DNA/RNA and proteins), or even cells, exosomes, and viruses detected using electrochemical sensors and biosensors. Separate chapters are provided to show the potential of MXene-based devices for determination of cancer biomarkers and as wearable sensors and biosensors for monitoring of a wide range of human activities.

Oxygen Vacancies and Surface Wettability: Key Factors in Activating and Enhancing the Solar Photocatalytic Activity of ZnO Tetrapods

This paper reports on the high photocatalytic activity of ZnO tetrapods (ZnO-Ts) using visible/solar light and hydrodynamic water flow. It was shown that surface oxygen defects are a key factor in the photocatalytic activity of the ZnO-Ts. The ability to control the surface wettability of the ZnO-Ts and the associated concentration of surface defects was demonstrated. It was demonstrated that the photocatalytic activity during the MB decomposition process under direct and simulated sunlight is essentially identical. This presents excellent prospects for utilizing the material in solar photocatalysis.

A double-quenching paperclip ECL biosensing platform for ultrasensitive detection of antibiotic resistance genes (mecA) based on Ti3C2 MXene-Au NPs as a coreactant accelerator

The global spread of environmental biological pollutants, such as antibiotic-resistant bacteria and their antibiotic resistance genes (ARGs), has emerged as a critical public health concern. It is imperative to address this pressing issue due to its potential implications for public health. Herein, a DNA paperclip probe with double-quenching function of target cyclic cleavage was proposed, and an electrochemiluminescence (ECL) biosensing platform was constructed using Ti3C2 MXene in-situ reduction growth of Au NPs (TCM-Au) as a coreactant accelerator, and applied to the sensitive detection of ARGs. Thanks to the excellent catalytic performance, large surface area and Au-S affinity of TCM-Au, the ECL performance of CdS QDs have been significantly improved. By cleverly utilizing the negative charge of the paperclip nucleic acid probe and its modification group, double-quenching of the ECL signal was achieved. This innovative approach, combined with target cyclic amplification, facilitated specific and sensitive detection of the mecA gene. This biosensing platform manifested highly selective and sensitive determination of mecA genes in the range of 10 fM to 100 nM and a low detection limit of 2.7 fM. The credible detectability and anti-interference were demonstrated in Yangtze river and Aeration tank outlet, indicating its promising application toward pollution monitoring of ARGs.

Facile synthesis of hierarchical CdS nanoflowers for efficient piezocatalytic hydrogen evolution

Piezocatalytic hydrogen evolution has emerged as a promising field for the collection and utilization of mechanical energy, as well as for generating sustainable energy throughout the day. Hexagonal CdS, an established semiconductor photocatalyst, has been widely investigated for its ability to split water into H2. However, its piezocatalytic performance has received less attention, and the relationship between its structure and piezocatalytic activity remains unclear. In this study, we prepared 3D ultrathin CdS nanoflowers with high voltage electrical response and low impedance. In pure water, without the use of any cocatalyst, CdS exhibited a piezoelectric catalytic hydrogen production rate of 1.46 mmol h-1 g-1, which was three times higher than that of CdS nanospheres (0.46 mmol h-1 g-1). Furthermore, the value-added oxidation product H2O2 was produced during the process of piezoelectric catalysis. These findings provide new insights for the design of high-efficiency piezoelectric catalytic hydrogen production.