Biofilm viability checker: An open-source tool for automated biofilm viability analysis from confocal microscopy images

The Impact of Silver Nanoparticles' Size on Biofilm Eradication

INTRODUCTION

Efficient intracanal disinfection is required for a successful regenerative endodontic treatment. Thus, this study aimed to identify the silver nanoparticles' (NPs) size (AgNPs) with the highest antibiofilm efficacy when mixed with calcium hydroxide [Ca(OH)2] to eradicate an in vitro endodontic biofilm.

METHODS

The various sizes of AgNPs and mixtures were characterized by scanning electron microscopy, transmission electron microscopy, and ultraviolet-visible spectroscopy. A total of 168 dentin root segments were prepared, sterilized, and inoculated for 3 weeks with Actinomyces naeslundii and Fusobacterium nucleatum. Samples were randomly allocated to 4 experimental groups (n = 28/group): 2 nm AgNPs + 35% Ca(OH)2, 5 nm AgNPs + 35% Ca(OH)2, 10 nm AgNPs + 35% Ca(OH)2, and 35% Ca(OH)2 alone. Samples exposed to saline and triple antibiotic paste (TAP) acted as negative and positive control groups, respectively. After 1 and 2 weeks, samples were stained with LIVE/DEAD BacLight dye and examined under a confocal laser scanning microscope to determine the proportion of dead bacteria.

RESULTS

The characterization procedure revealed a spherical NP's structure with minor aggregations. Except for Ca(OH)2 group, all groups had significantly higher antibiofilm efficacy at 2 weeks. Both the 10 nm mixture (99.5%) and TAP (99.2%) exhibited the highest antibiofilm efficacy at 2 weeks and were not significantly different from one another (P > .05). No significant difference was noted between the 2 and 5 nm mixtures at 1 week (81% and 84%) and 2 weeks (89% and 91%).

CONCLUSION

The 10 nm AgNPs (0.02%) + 35% Ca(OH)2 mixture exhibited the highest antibiofilm efficacy at 2 weeks compared to all other mixtures at both observation periods. Interestingly, the 10 nm mixture performed similarly to TAP at 2 weeks. Excluding Ca(OH)2 group, longer application significantly improved the antibiofilm efficacy of all tested medicaments.

CLINICAL RELEVANCE

The 10 nm AgNPs + 35% Ca(OH)2 mixture revealed promising results as an intracanal medicament in the regenerative endodontic treatment protocol.

Novel Teixobactin Analogues Show Promising In Vitro Activity on Biofilm Formation by Staphylococcus aureus and Enterococcus faecalis

The treatment of infections caused by biofilm-forming organisms is challenging. The newly discovered antibiotic teixobactin shows activity against a wide range of biofilm-forming bacteria. However, the laborious and low-yield chemical synthesis of teixobactin complicates its further development for clinical application. The use of more easily synthesized teixobactin analogues may offer promise in this regard. In this article, three newly developed analogues were tested for efficacy against Staphylococcus aureus and Enterococcus faecalis. Minimum inhibitory and -bactericidal concentrations were investigated. MIC values for S. aureus and E. faecalis ranged from 0.5-2 and 2-4 μg/mL, respectively. Moreover, the ability of the analogues to prevent biofilm formation and to inactivate bacterial cells in already established S. aureus biofilm on medical grade materials (PVC and PTFE) used in the production of infusion tubing and catheters were also tested. The analogues showed an ability to prevent biofilm formation and inactivate bacterial cells in established biofilms at concentrations as low as 1-2 μg/mL. Confocal laser scanning microscopy showed that the most promising analogue (TB3) inactivated S. aureus cells in a preformed biofilm and gave a reduction in biovolume. The relative ease of synthesis of the analogues and their in vitro efficacy, makes them promising candidates for pharmaceutical development.

Effect of biofilm physical characteristics on their susceptibility to antibiotics: impacts of low-frequency ultrasound

Biofilms are highly resistant to antimicrobials, often causing chronic infections. Combining antimicrobials with low-frequency ultrasound (LFU) enhances antimicrobial efficiency, but little is known about the underlying mechanisms. Biofilm physical characteristics, which depend on factors such as growth conditions and age, can have significant effects on inactivation efficiency. In this study, we investigated the susceptibility of Pseudomonas aeruginosa biofilms to tobramycin, with and without LFU treatment. The biofilms were grown under low and high fluid shear to provide different characteristics. Low-shear biofilms exhibited greater thickness, roughness, and porosity and lower density, compared to high-shear biofilms. The biofilm matrix of the high-shear biofilms had a three times higher protein-to-polysaccharide ratio, suggesting greater biofilm stiffness. This was supported by microrheology measurements of biofilm creep compliance. For the low-shear biofilms without LFU, the viability of the biofilms in their inner regions was largely unaffected by the antibiotic after a 2-hour treatment. However, when tobramycin was combined with LFU, the inactivation for the entire biofilm increased to 80% after 2 h. For the high-shear biofilms without LFU, higher LFU intensities were needed to achieve similar inactivation results. Microrheology measurements revealed that changes in biofilm inactivation profiles were closely related to changes in biofilm mechanical properties. Modeling suggests that LFU changes antibiotic diffusivity within the biofilm, probably due to a "decohesion" effect. Overall, this research suggests that biofilm physical characteristics (e.g., compliance, morphology) are linked to antimicrobial efficiency. LFU weakens the biofilm while increasing its diffusivity for antibiotics.

Antibiofilm effect of different concentrations of silver nanoparticles combined with calcium hydroxide against Enterococcus faecalis biofilm: An ex vivo study

This study aimed to evaluate the antibiofilm activity of different concentrations of silver nanoparticles (AgNPs) in combination with calcium hydroxide [Ca(OH)2] against Enterococcus faecalis biofilm. On an E. faecalis biofilm on dentin discs, the following medicaments were applied for 7 days (n = 13/group): 0.005% AgNPs+Ca(OH)2, 0.01% AgNPs+Ca(OH)2, 0.02% AgNPs + Ca(OH)2, Ca(OH)2 and saline/control. Specimens were stained with LIVE/DEAD® BacLight™ dye and analysed with confocal laser scanning microscopy. Proportion of dead bacteria was calculated and analysed. There was a significant reduction in E. faecalis biofilm in all medicament groups (43.5%, 49.1%, 69.1%, 48.7%) respectively, compared with control group (2.54%) (p < 0.001). The 0.02% AgNPs + Ca(OH)2 group demonstrated the most significantly superior antibiofilm effect, with no significant difference between remaining groups. In conclusion, combining 0.02% AgNPs enhanced the antibiofilm effect of Ca(OH)2 on E. faecalis biofilm compared with lower AgNPs concentrations.

Eco-alternative treatments for Vibrio parahaemolyticus and V. cholerae biofilms from shrimp industry through Eucalyptus (Eucalyptus globulus) and Guava (Psidium guajava) extracts: A road for an Ecuadorian sustainable economy

Understanding how environmental variables influence biofilm formation becomes relevant for managing Vibrio biofilm-related infections in shrimp production. Therefore, we evaluated the impact of temperature, time, and initial inoculum in the biofilm development of these two Vibrio species using a multifactorial experimental design. Planktonic growth inhibition and inhibition/eradication of Vibrio biofilms, more exactly V. parahaemolyticus (VP87 and VP275) and V. cholerae (VC112) isolated from shrimp farms were evaluated by Eucalyptus and Guava aqueous leaf extracts and compared to tetracycline and ceftriaxone. Preliminary results showed that the best growth conditions of biofilm development for V. parahaemolyticus were 24 h and 24°C (p <0.001), while V. cholerae biofilms were 72 h and 30°C (p <0.001). Multivariate linear regression ANOVA was applied using colony-forming unit (CFU) counting assays as a reference, and R-squared values were applied as goodness-of-fit measurements for biofilm analysis. Then, both plant extracts were analyzed with HPLC using double online detection by diode array detector (DAD) and mass spectrometry (MS) for the evaluation of their chemical composition, where the main identified compounds for Eucalyptus extract were cypellogin A, cypellogin B, and cypellocarpin C, while guavinoside A, B, and C compounds were the main compounds for Guava extract. For planktonic growth inhibition, Eucalyptus extract showed its maximum effect at 200 μg/mL with an inhibition of 75% (p < 0.0001) against all Vibrio strains, while Guava extract exhibited its maximum inhibition at 1600 μg/mL with an inhibition of 70% (p < 0.0001). Both biofilm inhibition and eradication assays were performed by the two conditions (24 h at 24°C and 72 h at 30°C) on Vibrio strains according to desirability analysis. Regarding 24 h at 24°C, differences were observed in the CFU counting between antibiotics and plant extracts, where both plant extracts demonstrated a higher reduction of viable cells when compared with both antibiotics at 8x, 16x, and 32x MIC values (Eucalyptus extract: 1600, 3200, and 6400 μg/mL; while Guava extract: 12800, 25600, and 52000 μg/mL). Concerning 72 h at 30°C, results showed a less notorious biomass inhibition by Guava leaf extract and tetracycline. However, Eucalyptus extract significantly reduced the total number of viable cells within Vibrio biofilms from 2x to 32x MIC values (400-6400 μg/mL) when compared to the same MIC values of ceftriaxone (5-80 μg/mL), which was not able to reduce viable cells. Eucalyptus extract demonstrated similar results at both growth conditions, showing an average inhibition of approximately 80% at 400 μg/mL concentration for all Vibrio isolates (p < 0.0001). Moreover, eradication biofilm assays demonstrated significant eradication against all Vibrio strains at both growth conditions, but biofilm eradication values were substantially lower. Both extract plants demonstrated a higher reduction of viable cells when compared with both antibiotics at 8x, 16x, and 32x MIC values at both growth sets, where Eucalyptus extract at 800 μg/mL reduced 70% of biomass and 90% of viable cells for all Vibrio strains (p < 0.0001). Overall results suggested a viable alternative against vibriosis in the shrimp industry in Ecuador.

Quantification of early biofilm growth in microtiter plates through a novel image analysis software

Given the significant impact of biofilms on human health and material corrosion, research in this field urgently needs more accessible techniques to facilitate the testing of new control agents and general understanding of biofilm biology. Microtiter plates offer a convenient format for standardized evaluations, including high-throughput assays of alternative treatments and molecular modulators. This study introduces a novel Biofilm Analysis Software (BAS) for quantifying biofilms from microtiter plate images. We focused on early biofilm growth stages and compared BAS quantification to common techniques: direct turbidity measurement, intrinsic fluorescence detection linked to pyoverdine production, and standard crystal violet staining which enables image analysis and optical density measurement. We also assessed their sensitivity for detecting subtle growth effects caused by cyclic AMP and gentamicin. Our results show that BAS image analysis is at least as sensitive as the standard method of spectrophotometrically quantifying the crystal violet retained by biofilms. Furthermore, we demonstrated that bacteria adhered after short incubations (from 10 min to 4 h), isolated from planktonic populations by a simple rinse, can be monitored until their growth is detectable by intrinsic fluorescence, BAS analysis, or resolubilized crystal violet. These procedures are widely accessible for many laboratories, including those with limited resources, as they do not require a spectrophotometer or other specialized equipment.

Activity of Synthetic Peptide KP and Its Derivatives against Biofilm-Producing Escherichia coli Strains Resistant to Cephalosporins

Bacterial resistance to β-lactam antibiotics, particularly new generation cephalosporins, is a major public health concern. In Escherichia coli, resistance to these antibiotics is mainly mediated by extended-spectrum β-lactamases (ESBL), which complicates a range of health-threatening infections. These infections may also be biofilm-related, making them more difficult to treat because of the higher tolerance to conventional antibiotics and the host immune response. In this study, we tested as potential new drug candidates against biofilm-forming ESBL-producing E. coli four antimicrobial peptides previously shown to have antifungal properties. The peptides proved to be active in vitro at micromolar concentrations against both sensitive and ESBL-producing E. coli strains, effectively killing planktonic cells and inhibiting biofilm formation. Quantitative fluorescence intensity analysis of three-dimensional reconstructed confocal laser scanning microscopy (CLSM) images of mature biofilm treated with the most active peptide showed significant eradication and a reduction in viable bacteria, while scanning electron microscopy (SEM) revealed gross morphological alterations in treated bacteria. The screening of the investigated peptides for antibacterial and antibiofilm activity led to the selection of a leading candidate to be further studied for developing new antimicrobial drugs as an alternative treatment against microbial infections, primarily associated with biofilms.

Pectin as a Biomaterial in Regenerative Endodontics-Assessing Biocompatibility and Antibacterial Efficacy against Common Endodontic Pathogens: An In Vitro Study

Regenerative endodontics (REP) is a new clinical modality aiming to regenerate damaged soft and hard dental tissues, allowing for root completion in young adults' teeth. Effective disinfection is crucial for REP success, but commonly used antimicrobials often harm the niche dental pulp stem cells (DPSCs). To our knowledge, this is the first study to explore the biocompatibility and antimicrobial potential of pectin as a potential natural intracanal medicament for REPs. Low methoxyl commercial citrus pectin (LM) (pectin CU701, Herbstreith&Fox.de) was used in all experiments. The pectin's antibacterial activity against single species biofilms (E. faecalis and F. nucleatum) was assessed using growth curves. The pectin's antimicrobial effect against mature dual-species biofilm was also evaluated using confocal laser scanning microscopy (CLSM) after 30 min and 7 days of treatment. The DPSC biocompatibility with 2% and 4% w/v of the pectin coatings was evaluated using live/dead staining, LDH, and WST-1 assays. Pectin showed a concentration-dependent inhibitory effect against single-species biofilms (E. faecalis and F. nucleatum) but failed to disrupt dual-species biofilm. Pectin at 2% w/v concentration proved to be biocompatible with the HDPSCs. However, 4% w/v pectin reduced both the viability and proliferation of the DPSCs. Low concentration (2% w/v) pectin was biocompatible with the DPSCs and showed an antimicrobial effect against single-species biofilms. This suggests the potential for using pectin as an injectable hydrogel for clinical applications in regenerative endodontics.

Low-biofouling membrane bioreactor: Effects of cis-2-Decenoic acid addition on EPS and biofouling mitigation

Biofouling is inevitable in the membrane process, particularly in membrane bioreactors (MBR) combined with activated sludge processes. Regulating microbial signaling systems with diffusible signal factors such as cis-2-Decenoic acid (CDA) can control biofilm formation without microbial death or growth inhibition. This study assessed the effectiveness of CDA in controlling biofouling in membrane bioreactors (MBRs), essential for wastewater treatment. By modulating microbial signaling, CDA mitigated biofilm formation without hindering microbial growth. Analysis using Confocal Laser Scanning Microscopy (CLSM) revealed structural alterations in the biofilm, reducing biomass and thickness upon CDA application. Moreover, examination of extracellular polymeric substances (EPS) highlighted a decrease in total EPS, particularly effective polysaccharides. In addition, the possibility of shifting from high molecular weight EPS to low molecular weight EPS was revealed through the change in dispersion activity. The 56% extension of MBR operational lifespan resulting from the reduction in EPS is anticipated to offer potential cost savings and improved performance. Despite these results, further investigation is crucial to validate any potential environmental risks associated with CDA and to comprehend its long-term effects at various conditions.

Staphylococcus epidermidis biofilm assembly and self-dispersion: bacteria and matrix dynamics

Staphylococcus epidermidis, despite being a commensal of human skin and mucosa, is a major nosocomial pathogen implicated in device-associated infections. The dissemination of infection to other body sites is related to biofilm dispersal. This study focused on the dispersion stage of S. epidermidis CIP 444 biofilm, with the assessment of biofilm matrix composition in a time-dependent experiment (7 days extended) with 3 independent repetitions, using confocal laser scanning microcopy (CLSM) in association with ZEN 3.4 blue edition, COMSTAT, and ImageJ software. SYTO-9, propidium iodide (PI), DID'OIL, FITC, and calcofluor white M2R (CFW) were used to stain biofilm components. The results indicated that the biomass of dead cells increased from 15.18 ± 1.81 µm3/µm2 (day 3) to 23.15 ± 6.075 µm3/µm2 (day 4), along with a decrease in alive cells' biomass from 22.75 ± 2.968 µm3/µm2 (day 3) to 18.95 ± 5.713 µm3/µm2 (day 4). When the intensities were measured after marking the biofilm components, in a 24-h-old biofilm, polysaccharide made up the majority of the investigated components (52%), followed by protein (18.9%). Lipids make up just 11.6% of the mature biofilm. Protein makes up the largest portion (48%) of a 4-day-old biofilm, followed by polysaccharides (37.8%) and lipids (7.27%). According to our findings, S. epidermidis CIP 444 dispersion occurred on day 4 of incubation, and new establishment of the biofilm occurred on day 7. Remarkable changes in biofilm composition will pave the way for a new approach to understanding bacterial strategies inside biofilms and finding solutions to their impacts in the medical field.

Utilizing a Fe3O4 Magnetite Nanoparticle for Anode Modification in a Microbial Desalination Cell to Treat Saltwater

The microbial desalination cell (MDC) is a bio-electrochemical system that exhibits the ability to oxidize organic compounds, produce energy, and decrease the saline concentrations within the desalination chamber. The selective removal of ions from the desalination chamber is significantly influenced by the anion and cation exchange membranes. In this study, a three-chamber microbial desalination cell was developed to treat seawater using a synthesize Fe3O4 magnetite nanoparticle (MNP)-modified anode. The impact of different performance parameters, such as temperature, pH, and concentrations of NPs, has been investigated in order to assess the performance of three-chamber MDCs in terms of energy recovery and salt removal. The evaluation criteria of the system included multiple factors such as chemical oxygen demand (COD), Coulombic efficiency (CE), desalination efficiency, as well as system aspects including voltage generation and power density. The highest COD% removal efficiency was 74% at 37 °C, pH = 7, and 30 g/L salt concentration with an optimized NPs concentration of 2.0 mg/cm2 impregnated on anode. The maximum Coulombic efficiency was 10.3% with the maximum power density of 4.3 W/m3. The effect of the nanoparticle concentration impregnated on the anode was clarified by the primary factor of analysis. This research has revealed consistent patterns in the enhancement of voltage generation, COD, and Coulombic efficiencies when incorporating higher concentrations of nanoparticles on the anode at a certain point.

Functionalization of seawater reverse osmosis membrane with quorum sensing inhibitor to regulate microbial community and mitigate membrane biofouling

Membrane biofouling is a challenge to be solved for the stable operation of the seawater reverse osmosis (SWRO) membrane. This study explored the regulation mechanism of quorum sensing (QS) inhibition on microbial community composition and population-level behaviors in seawater desalination membrane biofouling. A novel antibiofouling SWRO membrane (MA_m) by incorporating one of quorum sensing inhibitors (QSIs), methyl anthranilate (MA) was prepared. It exhibited enhanced anti-biofouling performance than the exogenous addition of QSIs, showing long-term stability and alleviating 22 % decrease in membrane flux compared with the virgin membrane. The results observed that dominant bacteria Epsilon- and Gamma-proteobacteria (Shewanella, Olleya, Colwellia, and Arcobacter), which are significantly related to (P ≤ 0.01) the metabolic products (i.e., polysaccharides, proteins and eDNA), are reduced by over 80 % on the MA_m membrane. Additionally, the introduction of MA has a more significant impact on the QS signal-sensing pathway through binding to the active site of the transmembrane sensor receptor. It effectively reduces the abundance of genes encoding QS and extracellular polymeric substance (EPS) (exopolysaccharides (i.e., galE and nagB) and amino acids (i.e., ilvE, metH, phhA, and serB)) by up to 50 % and 30 %, respectively, resulting in a reduction of EPS by more than 50 %, thereby limiting the biofilm formation on the QSI-modified membrane. This study provides novel insights into the potential of QSIs to control consortial biofilm formation in practical SWRO applications.

Synergistic use of anti-inflammatory ketorolac and gentamicin to target staphylococcal biofilms

BACKGROUND

While antibiotics remain our primary tools against microbial infection, increasing antibiotic resistance (inherent and acquired) is a major detriment to their efficacy. A practical approach to maintaining or reversing the efficacy of antibiotics is the use of other commonly used therapeutics, which show synergistic antibacterial action with antibiotics. Here, we investigated the extent of antibacterial synergy between the antibiotic gentamicin and the anti-inflammatory ketorolac regarding the dynamics of biofilm growth, the rate of acquired resistance, and the possible mechanism of synergy.

METHODS

Control (ATCC 12600, ATCC 35984) and clinical strains (L1101, L1116) of Staphylococcus aureus and Staphylococcus epidermidis with varying antibiotic susceptibility profiles were used in this study to simulate implant-material associated low-risk and high-risk biofilms in vitro. The synergistic action of gentamicin sulfate (GS) and ketorolac tromethamine (KT), against planktonic staphylococcal strains were determined using the fractional inhibitory concentration measurement assay. Nascent (6 h) and established (24 h) biofilms were grown on 316L stainless steel plates and the synergistic biofilm eradication activity was determined and characterized using adherent bacteria count, minimum biofilm eradication concentration (MBEC) measurement for GS, visualization by live/dead imaging, scanning electron microscopy, gene expression of biofilm-associated genes, and bacterial membrane fluidity assessment.

RESULTS

Gentamicin-ketorolac (GS-KT) combination demonstrated synergistic antibacterial action against planktonic Staphylococci. Control and clinical strains showed distinct biofilm growth dynamics and an increase in biofilm maturity was shown to confer further resistance to gentamicin for both 'low-risk' and 'high-risk' biofilms. The addition of ketorolac enhanced the antibiofilm activity of gentamicin against acquired resistance in staphylococcal biofilms. Mechanistic studies revealed that the synergistic action of gentamicin-ketorolac interferes with biofilm morphology and subverts bacterial stress response altering bacterial physiology, membrane dynamics, and biofilm properties.

CONCLUSION

The results of this study have a significant impact on the local administration of antibiotics and other therapeutic agents commonly used in the prevention and treatment of orthopaedic infections. Further, these results warrant the study of synergy for the concurrent or sequential administration of non-antibiotic drugs for antimicrobial effect.

Poly-Gamma-Glutamic Acid Nanopolymer Effect against Bacterial Biofilms: In Vitro and In Vivo Study

In this study, a biodegradable poly-gamma-glutamic-acid nanopolymer (Ɣ-PGA NP) was investigated for its activity against clinical strains of Gram-positive (Staphylococcus aureus and Streptococcus pyogenes) and Gram-negative (Klebsiella pneumoniae and Escherichia coli), and reference strains of S. aureus ATCC 6538, S. pyogenes ATCC 19615 (Gram-positive), and Gram-negative E. coli ATCC 25922, and K. pneumoniae ATCC 13884 bacterial biofilms. The minimum inhibitory concentration (MIC) effect of Ɣ-PGA NP showed inhibitory effects of 0.2, 0.4, 1.6, and 3.2 μg/mL for S. pyogenes, S. aureus, E. coli, and K. pneumoniae, respectively. Also, MIC values were 1.6, 0.8, 0.2, and 0.2 μg/mL for K. pneumoniae ATCC 13884, E. coli ATCC 25922, S. aureus ATCC 6538, and S. pyogenes ATCC 19615, respectively. Afterwards, MBEC (minimum biofilm eradication concentration) and MBIC (minimum biofilm inhibitory concentration) were investigated to detect Ɣ-PGA NPs efficiency against the biofilms. MBEC and MBIC increased with increasing Ɣ-PGA NPs concentration or time of exposure. Interestingly, MBIC values were at lower concentrations of Ɣ-PGA NPs than those of MBEC. Moreover, MBEC values showed that K. pneumoniae was more resistant to Ɣ-PGA NPs than E. coli, S. aureus, and S. pyogenes, and the same pattern was observed in the reference strains. The most effective results for MBEC were after 48 h, which were 1.6, 0.8, 0.4, and 0.2 µg/mL for K. pneumoniae, E. coli, S. aureus, and S. pyogenes, respectively. Moreover, MBIC results were the most impactful after 24 h but some were the same after 48 h. MBIC values after 48 h were 0.2, 0.2, 0.2, and 0.1 μg/mL for K. pneumoniae, E. coli, S. aureus, and S. pyogenes, respectively. The most effective results for MBEC were after 24 h, which were 1.6, 0.8, 0.4, and 0.4 µg/mL for K. pneumoniae ATCC 13884, E. coli ATCC 25922, S. aureus ATCC 6538, and S. pyogenes ATCC 19615, respectively. Also, MBIC results were the most impactful after an exposure time of 12 h. MBIC values after exposure time of 12 h were 0.4, 0.4, 0.2, and 0.2 μg/mL for K. pneumoniae ATCC 13884, E. coli ATCC 25922, S. aureus ATCC 6538, and S. pyogenes ATCC 19615, respectively. Besides that, results were confirmed using confocal laser scanning microscopy (CLSM), which showed a decrease in the number of living cells to 80% and 60% for MBEC and MBIC, respectively, for all the clinical bacterial strains. Moreover, living bacterial cells decreased to 70% at MBEC while decreasing up to 50% at MBIC with all bacterial refence strains. These data justify the CFU quantification. After that, ImageJ software was used to count the attached cells after incubating with the NPs, which proved the variation in live cell count between the manual counting and image analysis methods. Also, a scanning electron microscope (SEM) was used to detect the biofilm architecture after incubation with the Ɣ-PGA NP. In in vivo wound healing experiments, treated wounds of mice showed faster healing (p < 0.00001) than both the untreated mice and those that were only wounded, as the bacterial count was eradicated. Briefly, the infected mice were treated faster (p < 0.0001) when infected with S. pyogenes > S. aureus > E. coli > K. pneumoniae. The same pattern was observed for mice infected with the reference strains. Wound lengths after 2 h showed slightly healing (p < 0.001) for the clinical strains, while treatment became more obvious after 72 h > 48 h > 24 h (p < 0.0001) as wounds began to heal after 24 h up to 72 h. For reference strains, wound lengths after 2 h started to heal up to 72 h.

SERS immunoassay analysis of Escherichia coli and Staphylococcus aureus based on sandwich-structured complex probe and target-induced strand displacement

A direct and ultra-sensitive surface-enhanced Raman scattering (SERS) immunoassay method is introduced for the detection of Escherichia coli and Staphylococcus aureus. This methodology is based on a sandwich-structured complex probe (SCP) mechanism, combined with target-induced strand displacement. Moreover, by leveraging the amplified SERS signal from gold nanoparticles (AuNPs) corresponding to an increase in bacterial count, we achieve quantitative determination. The SCP demonstrates remarkable specificity, sensitivity, and anti-interference capability in bacterial detection. The detection limits for both bacterial strains are as low as 10 CFU/mL. In our selectivity tests, all peak intensities had standard deviations (n = 3) below 6%. Recoveries in normal human serum were 101-110% for E. coli and 96-101% for S. aureus. In milk, the recoveries were 102-105% for E. coli and 100-105% for S. aureus, respectively, demonstrating a high level of accuracy and resistance to interference. In addition, the SCP offers a dual-detection capability, enabling simultaneous diagnosis of multiple targets, which greatly simplifies the testing procedure. The findings underscore that this immunoassay platform fulfills the demand for rapid and precise pathogenic bacterial diagnosis, holding substantial potential for practical applications.

A novel method to estimate biofilm activity based on enzymatic oxygen release from hydrogen peroxide decomposition

Biofilm is central for biological water treatment processes in recirculating aquaculture systems (RAS). A lack of suitable methods for quantifying biofilm activity, however, makes it difficult to assess and compare the microbial status of biofilm. This type of information of the biofilm will be useful to assess the colonization status of nitrifying biocarriers or to evaluate the effect of disinfectants on the biofilm activity. Here we introduce a novel assay for rapid assessment of microbial activities in the biofilm attached on bioelements from a RAS biofilter. The assay consisted of an intermittent respirometer platform where biofilter elements were exposed to 10 mg/L hydrogen peroxide (H2O2) for 1 h, following concurrent measurements of oxygen release from the decomposition of H2O2 caused by biofilm-associated enzymes. A different number of colonized, mature bioelements from a moving bed biofilter in a freshwater RAS were tested with repeated H2O2 exposure, and compared against their autoclaved forms. A substantial increase in dissolved oxygen (DO) concentration (0.92-2.31 mg O2/L) occurred with mature bioelements during 1 h of H2O2 exposure, compared to small amounts of DO release (≤0.27 mg O2/L) with autoclaved bioelements. This substantiates that H2O2 decomposition by biofilm is mainly governed by microbial enzymatic activities. A monomolecular model fitted well with the observed oxygen release profiles of tested mature bioelements after H2O2 exposure (R2 > 0.98). The kinetic rate constant of net oxygen release (k or , h-1) was proportional (R2 for linear fit = 0.99) to the number of mature bioelements tested. Repeated exposure of H2O2 to the same bioelements did not change k or , which indicates that 10 mg/L H2O2 with an exposure time of 1 h does not suppress enzymatic activity in biofilm. Our study provides a new rapid method that allows simple quantification of microbial activity in biofilm samples from aquaculture systems, which could potentially be also applied to study biofilm from wastewater treatment plants and other industries.

A Guideline for Assessment and Characterization of Bacterial Biofilm Formation in the Presence of Inhibitory Compounds

Campylobacter jejuni, a zoonotic foodborne pathogen, is the worldwide leading cause of acute human bacterial gastroenteritis. Biofilms are a significant reservoir for survival and transmission of this pathogen, contributing to its overall antimicrobial resistance. Natural compounds such as essential oils, phytochemicals, polyphenolic extracts, and D-amino acids have been shown to have the potential to control biofilms formed by bacteria, including Campylobacter spp. This work presents a proposed guideline for assessing and characterizing bacterial biofilm formation in the presence of naturally occurring inhibitory molecules using C. jejuni as a model. The following protocols describe: i) biofilm formation inhibition assay, designed to assess the ability of naturally occurring molecules to inhibit the formation of biofilms; ii) biofilm dispersal assay, to assess the ability of naturally occurring inhibitory molecules to eradicate established biofilms; iii) confocal laser scanning microscopy (CLSM), to evaluate bacterial viability in biofilms after treatment with naturally occurring inhibitory molecules and to study the structured appearance (or architecture) of biofilm before and after treatment.

Synergistic use of anti-inflammatory ketorolac and gentamicin to target staphylococcal biofilms

Background

While antibiotics remain our primary tools against microbial infection, increasing antibiotic resistance (inherent and acquired) is a major detriment to their efficacy. A practical approach to maintaining or reversing the efficacy of antibiotics is the use of other commonly used therapeutics, which show synergistic antibacterial action with antibiotics. Here, we investigated the extent of antibacterial synergy between the antibiotic gentamicin and the anti-inflammatory ketorolac regarding the dynamics of biofilm growth, the rate of acquired resistance, and the possible mechanism of synergy.

Methods

Control (ATCC 12600, ATCC 35984) and clinical strains (L1101, L1116) of S. aureus and S. epidermidis with varying antibiotic susceptibility profiles were used in this study to simulate implant-material associated low-risk and high-risk biofilms in vitro. The synergistic action of gentamicin sulfate (GS) and ketorolac tromethamine (KT), against planktonic staphylococcal strains were determined using the fractional inhibitory concentration measurement assay. Nascent (6hr) and established (24hr) biofilms were grown on 316 stainless steel plates and the synergistic biofilm eradication activity was determined and characterized using adherent bacteria count, MBEC measurement for GS, gene expression of biofilm-associated genes, visualization by live/dead imaging, scanning electron microscopy, and bacterial membrane fluidity assessment.

Results

Gentamicin-ketorolac combination demonstrated synergistic antibacterial action against planktonic Staphylococci. Control and clinical strains showed distinct biofilm growth dynamics and an increase in biofilm maturity was shown to confer further resistance to gentamicin for both 'low-risk' and 'high-risk' biofilms. The addition of ketorolac enhanced the antibiofilm activity of gentamicin against acquired resistance in staphylococcal biofilms. Mechanistic studies revealed that the synergistic action of gentamicin-ketorolac interferes with biofilm morphology and subverts bacterial stress response altering bacterial physiology, membrane dynamics, and biofilm properties.

Conclusion

The results of this study have a significant impact on the local administration of antibiotics and other therapeutic agents commonly used in the prevention and treatment of orthopaedic infections. Further, these results warrant the study of synergy for the concurrent or sequential administration of non-antibiotic drugs for antimicrobial effect.

Evaluation of the polyphenolic profile of native Ecuadorian stingless bee honeys (Tribe: Meliponini) and their antibiofilm activity on susceptible and multidrug-resistant pathogens: An exploratory analysis

Biofilms are associated with infections that are resistant to conventional therapies, contributing to the antimicrobial resistance crisis. The need for alternative approaches against biofilms is well-known. Although natural products like stingless bee honeys (tribe: Meliponini) constitute an alternative treatment, much is still unknown. Our main goal was to evaluate the antibiofilm activity of stingless bee honey samples against multidrug-resistant (MDR) pathogens through biomass assays, fluorescence (cell count and viability), and scanning electron (structural composition) microscopy. We analyzed thirty-five honey samples at 15% (v/v) produced by ten different stingless bee species (Cephalotrigona sp., Melipona sp., M. cramptoni, M. fuscopilosa, M. grandis, M. indecisa, M. mimetica, M. nigrifacies, Scaptotrigona problanca, and Tetragonisca angustula) from five provinces of Ecuador (Tungurahua, Pastaza, El Oro, Los Ríos, and Loja) against 24-h biofilms of Staphylococcus aureus, Klebsiella pneumoniae, Candida albicans, and Candida tropicalis. The present honey set belonged to our previous study, where the samples were collected in 2018-2019 and their physicochemical parameters, chemical composition, mineral elements, and minimal inhibitory concentration (MIC) were screened. However, the polyphenolic profile and their antibiofilm activity on susceptible and multidrug-resistant pathogens were still unknown. According to polyphenolic profile of the honey samples, significant differences were observed according to their geographical origin in terms of the qualitative profiles. The five best honey samples (OR24.1, LR34, LO40, LO48, and LO53) belonging to S. problanca, Melipona sp., and M. indecisa were selected for further analysis due to their high biomass reduction values, identification of the stingless bee specimens, and previously reported physicochemical parameters. This subset of honey samples showed a range of 63-80% biofilm inhibition through biomass assays. Fluorescence microscopy (FM) analysis evidenced statistical log reduction in the cell count of honey-treated samples in all pathogens (P <0.05), except for S. aureus ATCC 25923. Concerning cell viability, C. tropicalis, K. pneumoniae ATCC 33495, and K. pneumoniae KPC significantly decreased (P <0.01) by 21.67, 25.69, and 45.62%, respectively. Finally, scanning electron microscopy (SEM) analysis demonstrated structural biofilm disruption through cell morphological parameters (such as area, size, and form). In relation to their polyphenolic profile, medioresinol was only found in the honey of Loja, while scopoletin, kaempferol, and quercetin were only identified in honey of Los Rios, and dihydrocaffeic and dihydroxyphenylacetic acids were only detected in honey of El Oro. All the five honey samples showed dihydrocoumaroylhexose, luteolin, and kaempferol rutinoside. To the authors' best knowledge, this is the first study to analyze stingless bees honey-treated biofilms of susceptible and/or MDR strains of S. aureus, K. pneumoniae, and Candida species.

Tools of the Trade: Image Analysis Programs for Confocal Laser-Scanning Microscopy Studies of Biofilms and Considerations for Their Use by Experimental Researchers

Confocal laser-scanning microscopy (CLSM) is the bedrock of the microscopic visualization of biofilms. Previous applications of CLSM in biofilm studies have largely focused on observations of bacterial or fungal elements of biofilms, often seen as aggregates or mats of cells. However, the field of biofilm research is moving beyond qualitative observations alone, toward the quantitative analysis of the structural and functional features of biofilms, across clinical, environmental, and laboratory conditions. In recent times, several image analysis programs have been developed to extract and quantify biofilm properties from confocal micrographs. These tools not only vary in their scope and relevance to the specific biofilm features under study but also with respect to the user interface, compatibility with operating systems, and raw image requirements. Understanding these considerations is important when selecting tools for quantitative biofilm analysis, including at the initial experimental stages of image acquisition. In this review, we provide an overview of image analysis programs for confocal micrographs of biofilms, with a focus on tool selection and image acquisition parameters that are relevant for experimental researchers to ensure reliability and compatibility with downstream image processing.

Label-free analysis of biofilm phenotypes by infrared micro- and correlation spectroscopy

The methodology development for deeply describing the complex biofilm phenotypes is an urgent demand for understanding their basic biology and the central clinic relevance. Here, we developed an infrared microspectroscopy-based method for the quantitative evaluation and description of biofilm phenotypic characteristics by calculating the spectral similarity of the infrared data. Using this approach, we revealed the phenotypic variation during the biofilm formation process and biofilm heterogeneity between two E. coli strains. Two-dimensional correlation spectroscopy was further combined to deeply investigate the biochemical component evolution sequences during E. coli biofilm formation and revealed the first-order of the polysaccharide molecules change, expanding new opportunities for infrared microspectroscopy in revealing molecule evolution in the biofilm formation. This novel development offers a label-free optical toolkit for the bioanalytical analysis of biofilm phenotypes but also paves the way for screening the drugs to modulate the structure and ecology of biofilm microbiome.

A novel glass ionomer cement with silver zeolite for restorative dentistry

OBJECTIVE

To develop an antimicrobial silver zeolite glass ionomer cement (SZ-GIC) and determine its biocompatibility, physical, adhesive and antibacterial properties.

METHODS

Silver nitrate and sodium zeolite were used to synthesize silver zeolite (SZ). SZ-GICs were prepared by incorporating SZ into GIC at 5% (SZ-GIC5), 2% (SZ-GIC2), or 1% (SZ-GIC1) by weight, respectively. The SZ-GICs were characterized by evaluating surface morphology, topography and elemental composition. SZ-GICs' biocompatibility was assessed by evaluating cell cytotoxicity. Their physical properties were determined by testing setting time, compressive strength, flexural strength, water sorption and solubility. Their adhesive property was assessed by evaluating micro-tensile bond strength. Their antibacterial properties were assessed by evaluating biofilm growth kinetic, metabolic activity, viability and morphology. GIC was used as a control.

RESULTS

SZ was a three-dimensional crystalline mineral. SZ-GICs (including SZ-GIC 5, 2 and 1) showed similar surface morphology and topography to GIC. SZ-GIC1 and GIC had no difference in cell cytotoxicity (p>0.05). SZ-GICs and GIC showed no difference in setting time (p>0.05). SZ-GICs had higher compressive and flexural strength than GIC (p<0.05). SZ-GIC2 and SZ-GIC1 showed lower water sorption and solubility than GIC (p<0.05). SZ-GICs had higher micro-tensile bond strength than GIC (p<0.05). Biofilms on SZ-GICs' surfaces showed lower colony-forming units, decreased metabolic activities, higher percentages of dead cells and more ruptured bacterial cells compared with those on GIC.

CONCLUSION

SZ-GIC with silver zeolite at 1% by weight are as biocompatible as conventional GIC. The SZ-GICs have enhanced physical, adhesive and antibacterial properties than GIC.

CLINICAL SIGNIFICANCE

A silver zeolite glass ionomer cement was developed. The SZ-GICs have great potential for caries prevention and management.

A Novel Zinc (II) Porphyrin Is Synergistic with PEV2 Bacteriophage against Pseudomonas aeruginosa Infections

Pseudomonas aeruginosa (PsA) is an opportunistic bacterial pathogen that causes life-threatening infections in individuals with compromised immune systems and exacerbates health concerns for those with cystic fibrosis (CF). PsA rapidly develops antibiotic resistance; thus, novel therapeutics are urgently needed to effectively combat this pathogen. Previously, we have shown that a novel cationic Zinc (II) porphyrin (ZnPor) has potent bactericidal activity against planktonic and biofilm-associated PsA cells, and disassembles the biofilm matrix via interactions with eDNA In the present study, we report that ZnPor caused a significant decrease in PsA populations in mouse lungs within an in vivo model of PsA pulmonary infection. Additionally, when combined with an obligately lytic phage PEV2, ZnPor at its minimum inhibitory concentration (MIC) displayed synergy against PsA in an established in vitro lung model resulting in greater protection of H441 lung cells versus either treatment alone. Concentrations above the minimum bactericidal concentration (MBC) of ZnPor were not toxic to H441 cells; however, no synergy was observed. This dose-dependent response is likely due to ZnPor's antiviral activity, reported herein. Together, these findings show the utility of ZnPor alone, and its synergy with PEV2, which could be a tunable combination used in the treatment of antibiotic-resistant infections.

Proposal and Verification of the Theory of Layer-by-Layer Elimination of Biofilm in Listeria monocytogenes

Biofilms are microbial communities that represent a high abundance of microbial life forms on Earth. Within biofilms, structural changes during clearance processes occur in three spatial and temporal dimensions; therefore, microscopy and quantitative image analysis are essential in elucidating their function. Here, we present confocal laser scanning microscopy (CLSM) in conjunction with ISA-2 software analysis for the automated and high-throughput quantification, analysis, and visualisation of biofilm interiors and overall biofilm properties in three spatial and temporal dimensions. This paper discusses the removal process of Listeria monocytogenes (LM) biofilms using slightly acidic electrolytic water, non-electrolytic hypochlorite water, and alternating the use of strongly acidic and strongly alkaline electrolytic water. The results show that the biofilm gradually thins and gutters from the initial viscous dense and thick morphology under the action of either biocide. This process is consistent with first-level kinetics. After CLSM filming to observe the biofilm structure, analysis software was used to process and quantify the biovolume, average biofilm thickness, biofilm roughness and other indicators; fluorescence enzyme markers were used to verify the remaining amount of extracellular nucleic acid. In this study, we proposed and validated the theory of layer-by-layer elimination of LM biofilm.

Periodontopathic bacterial adhesion to different restorative materials used to elevate proximal subgingival margins

This study compared the periodontopathic bacterial adhesion to four restorative materials used for deep margin elevation at 2, 24, and 48-h after incubation. Discs were produced from four restorative materials: resin modified glass ionomer, glass hybrid, flowable bulk fill resin composite, and bioactive ionic resin. Root dentin was used as control. Specimens were coated with saliva and used to culture a biofilm comprised of three strains of periodontopathic bacteria; Porphyromonas gingivalis, Prevotella intermedia, and Aggregatibacter actinomycetemcomitans. Bacterial adherence was assessed by colony count assay, crystal violet staining, and visualized using confocal laser scanning microscopy. Data were analyzed by two-way ANOVA followed by Tukey's post hoc tests. The adhesion values for the control specimens were significantly higher than for other materials, while those for the flowable bulk fill were significantly lower than for any other material within all evaluation assays. The 2-h incubation period showed the lowest adhesion values regardless of the group. The 48-h adhesion values were higher than the 24-h results in all groups except the flowable bulk fill. Microscopic imaging partially supported the findings of the measurements. In terms of periodontopathic bacterial adhesion, the tested flowable bulk fill may be preferable for subgingival use over other tested materials.

A new spray-based method for the in-vitro development of dry-surface biofilms

The inanimate environment immediately surrounding the patient in healthcare facilities is a reservoir of microorganisms embedded in dry-surface biofilms (DSB). These biofilms, first highlighted in 2012, are increasingly studied, but currently available in-vitro models only allow for the growth of semi-hydrated biofilms. We developed a new in-vitro method under actual dehydration conditions based on the hypothesis that surface contamination is mainly due to splashes of respiratory secretions. The main objective of this study was to show that the operating conditions we have defined allowed the growth of DSB with a methicillin resistant Staphylococcus aureus strain. The second objective was to show that extended-spectrum beta-lactamase-producing Enterobacteriaceae, that is, Klebsiella pneumoniae and Enterobacter cloacae were also able to grow such biofilms under these conditions. Monobacterial suspensions in sterile artificial saliva (SAS) were sprayed onto polyethylene surfaces. Nutrients and hydration were provided daily by spraying SAS enriched with 20% of Brain Heart Infusion broth. The primary outcome was mean surface coverage measured by image analysis after crystal violet staining. The method applied to S. aureus for 12 days resulted in reproducible and repeatable DSB consisting of isolated and confluent microcolonies embedded in extracellular polymeric substances as shown in scanning electron microscopy images. Similar DSB were obtained with both Enterobacteriaceae applying the same method. No interspecies variation was shown between the three strains in terms of surface coverage. These first trials are the starting point for a 3-year study currently in process.

Detection of microscopic filamentous fungal biofilms - Choosing the suitable methodology

Microscopic filamentous fungi are ubiquitous microorganisms that adapt very easily to a variety of environmental conditions. Due to this adaptability, they can colonize a number of various surfaces where they are able to start forming biofilms. Life in the form of biofilms provides them with many benefits (increased resistance to desiccation, UV radiation, antimicrobial compounds, and host immune response). The aim of this study is to find a reliable and reproducible methodology to determine biofilm growth of selected microscopic filamentous fungi strains. Several methods (crystal violet staining, MTT assay, XTT assay, resazurin assay) for the determination of total biofilm biomass and its metabolic activity were tested on four fungi - Alternaria alternata, Aspergillus niger, Fusarium culmorum and Fusarium graminearum, and their biofilm was also imaged by spinning disc confocal microscopy using fluorescent dyes. A reproducible biofilm quantification method is essential for the subsequent testing of the biofilm growth suppression using antifungal agents or physical methods. Crystal violet staining was found to be a suitable method for the determination of total biofilm biomass of selected strains, and the MTT assay for the determination of metabolic activity of the biofilms. Calcofluor white and Nile red fluorescent stains successfully dyed the hyphae of microscopic fungi.

Biomass-specific rates as key performance indicators: A nitrogen balancing method for biofilm-based electrochemical conversion

Microbial electrochemical technologies (METs) employ microorganisms utilizing solid-state electrodes as either electron sink or electron source, such as in microbial electrosynthesis (MES). METs reaction rate is traditionally normalized to the electrode dimensions or to the electrolyte volume, but should also be normalized to biomass amount present in the system at any given time. In biofilm-based systems, a major challenge is to determine the biomass amount in a non-destructive manner, especially in systems operated in continuous mode and using 3D electrodes. We developed a simple method using a nitrogen balance and optical density to determine the amount of microorganisms in biofilm and in suspension at any given time. For four MES reactors converting CO₂ to carboxylates, >99% of the biomass was present as biofilm after 69 days of reactor operation. After a lag phase, the biomass-specific growth rate had increased to 0.12-0.16 days^-1. After 100 days of operation, growth became insignificant. Biomass-specific production rates of carboxylates varied between 0.08-0.37 mol_C mol_X ^-1d^-1. Using biomass-specific rates, one can more effectively assess the performance of MES, identify its limitations, and compare it to other fermentation technologies.

Effect of surface stiffness in initial adhesion of oral microorganisms under various environmental conditions

Biofilms are three-dimensional structures formed as a result of microorganism's adhesion on a biotic or abiotic surface. Once a biofilm is established, it is onerous to eradicate it or kill the pathogens therein. Thus, targeting the microbial adhesion process, the initial stage of biofilm formation, is a reasonable approach to avoid challenges associated with subsequently formed biofilms. While many properties of interacting material that play significant roles in initial bacterial adhesion have been widely studied, the effect of surface stiffness on bacterial adhesion was relatively underexplored. In this study, we aimed to investigate the effect of surface stiffness on the adhesion of microbial species found in the oral cavity by employing representative oral bacteria, Streptococcus mutans and Streptococcus oralis, and the fungus, Candida albicans. We compared the adhesion behavior of these species alone or in combination toward various surface stiffness (0.06 - 3.01 MPa) by assessing the adhered and planktonic cell numbers at an early (4 h) adhesion stage under various carbon sources and the presence of conditioning film. Our data revealed that in general, a higher amount of microbial cells adhered to softer PDMS surfaces than stiffer ones, which indicates that surface stiffness plays a role in the adhesion of tested species (either single or co-cultured). This pattern was more obvious under sucrose conditions than glucose + fructose conditions. Interestingly, in monospecies, saliva coating did not alter the effect of surface stiffness on S. mutans adhesion while it diminished S. oralis and C. albicans adhesion. However, in the multispecies model, saliva coating rendered the percentage of all adhered microbes to varied PDMS not distinct. The data provide new insights into the role of surface stiffness on microbial mechanosensing and their initial adhesion behavior which may set a scientific foundation for future anti-adhesion strategies.

Enzymatic and Microbial Electrochemistry: Approaches and Methods

The coupling of enzymes and/or intact bacteria with electrodes has been vastly investigated due to the wide range of existing applications. These span from biomedical and biosensing to energy production purposes and bioelectrosynthesis, whether for theoretical research or pure applied industrial processes. Both enzymes and bacteria offer a potential biotechnological alternative to noble/rare metal-dependent catalytic processes. However, when developing these biohybrid electrochemical systems, it is of the utmost importance to investigate how the approaches utilized to couple biocatalysts and electrodes influence the resulting bioelectrocatalytic response. Accordingly, this tutorial review starts by recalling some basic principles and applications of bioelectrochemistry, presenting the electrode and/or biocatalyst modifications that facilitate the interaction between the biotic and abiotic components of bioelectrochemical systems. Focus is then directed toward the methods used to evaluate the effectiveness of enzyme/bacteria-electrode interaction and the insights that they provide. The basic concepts of electrochemical methods widely employed in enzymatic and microbial electrochemistry, such as amperometry and voltammetry, are initially presented to later focus on various complementary methods such as spectroelectrochemistry, fluorescence spectroscopy and microscopy, and surface analytical/characterization techniques such as quartz crystal microbalance and atomic force microscopy. The tutorial review is thus aimed at students and graduate students approaching the field of enzymatic and microbial electrochemistry, while also providing a critical and up-to-date reference for senior researchers working in the field.

Exploring the Diversity of Biofilm Formation by the Food Spoiler Brochothrix thermosphacta

Brochothrix thermosphacta is considered as a major spoiler of meat and seafood products. This study explores the biofilm formation ability and the biofilm structural diversity of 30 multi-origin B. thermosphacta strains using a set of complementary biofilm assays (biofilm ring test, crystal violet staining, and confocal laser scanning microscopy). Two major groups corresponding to low and high biofilm producers were identified. High biofilm producers presented flat architectures characterized by high surface coverage, high cell biovolume, and high surface area.

MEED: A novel robust contrast enhancement procedure yielding highly-convergent thresholding of biofilm images

Morphological and statistical investigation of biofilm images may be even more critical than the image acquisition itself, in particular in the presence of morphologically complex distributions, due to the unavoidable impact of the measurement technique too. Hence, digital image pre-processing is mandatory for reliable feature extraction and enhancement preliminary to segmentation. Also, pattern recognition in automated deep learning (both supervised and unsupervised) models often requires a preliminary effective contrast-enhancement. However, no universal consensus exists on the optimal contrast enhancement approach. This paper presents and discusses a new general, robust, reproducible, accurate and easy to implement contrast enhancement procedure, briefly named MEED-procedure, able to work on images with different bacterial coverages and biofilm structures, coming from different imaging instrumentations (herein stereomicroscope and transmission microscope). It exploits a proper succession of basic morphological operations (erosion and dilation) and a horizontal line structuring element, to minimize the impact on size and shape of the even finer bacterial features. It systematically enhances the objects of interest, without histogram stretching and/or undesirable artifacts yielded by common automated methods. The quality of the MEED-procedure is ascertained by segmentation tests which demonstrate its robustness regarding the determination of threshold and convergence of the thresholding algorithm. Extensive validation tests over a rich image database, comparison with the literature and comprehensive discussion of the conceptual background support the superiority of the MEED-procedure over the existing methods and demonstrate it is not a routine application of morphological operators.

Nano-microbial based technology employing polyvalent phage conjugate: A next generation weapon for antimicrobial resistance lurking behind wastewater

Worldwide, due to a dearth of innovative interventions, new forms of antimicrobial resistance (AMR) are being discovered every day in clinical and environmental settings. Therefore, it is necessary to remove these contaminants directly or indirectly from the environment. Nanomicrobial-based technology employing nanomaterials with microbes is a new paradigm that finds a place in the antimicrobial crisis. Microbial entities such as phages can be used to treat antimicrobial resistance, but phage resistance is challenging and limits its applicability. Similarly, nanotechnology will not be able to selectively remove resistant strains from the environment individually. Therefore, we employ nanomicrobial-based technology that aims to fill these gaps. In the present study, polyvalent phages were isolated from wastewater with an easy-to-use modified multi-host sequential approach, characterized and conjugated with magnetite (Fe₃O₄) nanoparticles with the modified formulation to form nanomicrobial conjugates (NMCs). These NMCs were subjected to characterization and in vitro antibacterial studies. The results indicated a significant polyvalency of phages in the order of Caudovirales. Transmission electron microscopy (TEM) analysis of Fe₃O₄ nanoparticles formed by the co-precipitation method showed a particle size of 30 ± 5 nm and the selected area electron diffraction (SAED) pattern indicates a single-phase crystalline structure. To form NMCs, isolated phages (10⁵ PFU/mL) were immobilized onto Fe₃O₄ nanoparticles. Further, surface modification of Fe₃O₄ nanoparticles enables the covalent association of phages. Biosurfactant-functionalized Fe₃O₄ nanoparticles (FNMCs) were found to have higher phage loading capacity, with a significant value of p < 0.0127 and a zeta potential of -22.2 mV. TEM studies and in vitro biofilm assay showed that NMCs exhibit promising antibacterial activity against various resistant bacterial strains. Pilot studies showed that NMCs can selectively eliminate up to 98.3% of AMR in wastewater. Thus, these findings indicate a synergistic effect of both phage and nanomaterial and this technology is expected to be a new lead in wastewater management.

The Use of 3D Optical Coherence Tomography to Analyze the Architecture of Cyanobacterial Biofilms Formed on a Carbon Nanotube Composite

The development of environmentally friendly antifouling strategies for marine applications is of paramount importance, and the fabrication of innovative nanocomposite coatings is a promising approach. Moreover, since Optical Coherence Tomography (OCT) is a powerful imaging technique in biofilm science, the improvement of its analytical power is required to better evaluate the biofilm structure under different scenarios. In this study, the effect of carbon nanotube (CNT)-modified surfaces in cyanobacterial biofilm development was assessed over a long-term assay under controlled hydrodynamic conditions. Their impact on the cyanobacterial biofilm architecture was evaluated by novel parameters obtained from three-dimensional (3D) OCT analysis, such as the contour coefficient, total biofilm volume, biovolume, volume of non-connected pores, and the average size of non-connected pores. The results showed that CNTs incorporated into a commercially used epoxy resin (CNT composite) had a higher antifouling effect at the biofilm maturation stage compared to pristine epoxy resin. Along with a delay in biofilm development, a decrease in biofilm wet weight, thickness, and biovolume was also achieved with the CNT composite compared to epoxy resin and glass (control surfaces). Additionally, biofilms developed on the CNT composite were smoother and presented a lower porosity and a strictly packed structure when compared with those formed on the control surfaces. The novel biofilm parameters obtained from 3D OCT imaging are extremely important when evaluating the biofilm architecture and behavior under different scenarios beyond marine applications.

DNase inhibits early biofilm formation in Pseudomonas aeruginosa- or Staphylococcus aureus-induced empyema models

Anti-infection strategies against pleural empyema include the use of antibiotics and drainage treatments, but bacterial eradication rates remain low. A major challenge is the formation of biofilms in the pleural cavity. DNase has antibiofilm efficacy in vitro, and intrapleural therapy with DNase is recommended to treat pleural empyema, but the relevant mechanisms remain limited. Our aim was to investigate whether DNase I inhibit the early biofilm formation in Pseudomonas aeruginosa- or Staphylococcus aureus-induced empyema models. We used various assays, such as crystal violet staining, confocal laser scanning microscopy (CLSM) analysis, peptide nucleic acid-fluorescence in situ hybridization (PNA-FISH), and scanning electron microscopy (SEM) analysis. Our results suggested that DNase I significantly inhibited early biofilm formation in a dose-dependent manner, without affecting the growth of P. aeruginosa or S. aureus in vitro. CLSM analysis confirmed that DNase I decreased the biomass and thickness of both bacterial biofilms. The PNA-FISH and SEM analyses also revealed that DNase I inhibited early (24h) biofilm formation in two empyema models. Thus, the results indicated that DNase inhibited early (24h) biofilm formation in P. aeruginosa- or S. aureus-induced rabbit empyema models and showed its therapeutic potential against empyema biofilms.

Evaluation of the biofilm life cycle between Candida albicans and Candida tropicalis

Candida tropicalis is an emergent pathogen with a high rate of mortality associated with its biofilm formation. Biofilm formation has important repercussions on the public health system. However, little is still known about its biofilm life cycle. The present study analyzed the biofilm life cycle of Candida albicans and C. tropicalis during various timepoints (24, 48, 72, and 96 h) through biomass assays, colony-forming unit (CFU) counting, and epifluorescence and scanning electron microscopies. Our results showed a significant difference between C. albicans and C. tropicalis biofilms in each biomass and viability assay. All-time samples in the biomass and viability assays confirmed statistical differences between the Candida species through pairwise Wilcoxon tests (p < 0.05). C. albicans demonstrated a lower biomass growth but reached nearly the same level of C. tropicalis biomass at 96 h, while the CFU counting assays exhibited a superior number of viable cells within the C. tropicalis biofilm. Statistical differences were also found between C. albicans and C. tropicalis biofilms from 48- and 72-h microscopies, demonstrating C. tropicalis with a higher number of total cells within biofilms and C. albicans cells with a superior cell area and higher matrix production. Therefore, the present study proved the higher biofilm production of C. tropicalis.

Biofilm formation of panresistant Klebsiella pneumoniae

Introduction: The authors aimed to investigate the biofilm-forming features of panresistant Klebsiella pneumoniae (PRKp). Material & methods: The biofilm formations were shown under light microscope and laser scanning confocal microscopy. The optical densities of the wells were measured and classified according to biofilm-forming capacities. Results: The ratio of biofilm-forming K. pneumoniae was established to be 100%. All isolates were found to form high-level biofilms in classification compared with positive and negative controls. No significant difference was detected in the biofilm-forming capacities of K. pneumoniae strains isolated from different sample types. Conclusion: No previous study associated with PRKp isolates was identified in the literature search. There is a need for different approaches characterizing the biofilm-forming features of PRKp.