Rational strain engineering in delafossite oxides for highly efficient hydrogen evolution catalysis in acidic media

Sub-2 nm Microstrained High-Entropy-Alloy Nanoparticles Boost Hydrogen Electrocatalysis

High-entropy alloys (HEAs) confine multifarious elements into the same lattice, leading to intense lattice distortion effect. The lattice distortion tends to induce local microstrain at atomic level and thus affect surface adsorptions toward different adsorbates in various electrocatalytic reactions, yet remains unexplored. Herein, this work reports a class of sub-2 nm IrRuRhMoW HEA nanoparticles (NPs) with distinct local microstrain induced by lattice distortion for boosting alkaline hydrogen oxidation (HOR) and evolution reactions (HER). This work demonstrates that the distortion-rich HEA catalysts with optimized electronic structure can downshift the d-band center and generate uncoordinated oxygen sites to enhance the surface oxophilicity. As a result, the IrRuRhMoW HEA NPs show a remarkable HOR kinetic current density of 8.09 mA µg-1 PGM at 50 mV versus RHE, 8.89, 22.47 times higher than those of IrRuRh NPs without internal strain and commercial Pt/C, respectively, which is the best value among all the reported non-Pt based catalysts. IrRuRhMoW HEA NPs also display great HER performances with a turnover frequency (TOF) value of 5.93 H2 s-1 at 70 mV versus RHE, 4.6-fold higher than that of Pt/C catalyst, exceeding most noble metal-based catalysts. Experimental characterizations and theoretical studies collectively confirm that weakened hydrogen (Had) and enhanced hydroxyl (OHad) adsorption are achieved by simultaneously modulating the hydrogen adsorption binding energy and surface oxophilicity originated from intensified ligand effect and microstrain effect over IrRuRhMoW HEA NPs, which guarantees the remarkable performances toward HOR/HER.

F-regulated Ni2P-F3 nanosheets as efficient electrocatalysts for full-water-splitting and urea oxidation

Heteroatomic anion doping represents a powerful approach for manipulating the electronic configuration of the active metal locus in electrocatalysts, resulting in enhanced multifunctional electrocatalytic properties in hydrogen/oxygen evolution reactions (HER/OER). Here, fluorine-tailored Ni2P-F3 nanosheets were synthesized and evaluated as a robust multifunctional electrocatalyst for HER, OER, and UOR. Our comprehensive experimental and theoretical investigations reveal that the anionic F effectively tailored the electronic states of the Ni2P-F3 nanosheets, resulting in an elevated d-band center and optimizing the sorption capacity of intermediates. In addition to thermodynamically and kinetically favoured redox reactions, F doping facilitates the reconstruction and generation of active γ-NiOOH. Resulting from the optimized electronic configuration and nanosheet architecture, outstanding catalytic activities are demonstrated by Ni2P-F3 with low overpotentials to reach 100 mA cm-2 for HER (177 mV) and OER (293 mV), surpassing Ni2P by 234 and 205 mV, respectively. Notably, 1.618 V is required for full-water-diversion to reach 10 mA cm-2, while 1.414 V is required with urea oxidation for 100 mA cm-2.

Lattice Strain and Mott-Schottky Effect of the Charge-Asymmetry Pd1Fe Single-Atom Alloy Catalyst for Semi-Hydrogenation of Alkynes with High Efficiency

The ideal interface design between the metal and substrate is crucial in determining the overall performance of the alkyne semihydrogenation reaction. Single-atom alloys (SAAs) with isolated dispersed active centers are ideal media for the study of reaction effects. Herein, a charge-asymmetry "armor" SAA (named Pd1Fe SAA@PC), which consists of a Pd1Fe alloy core and a semiconducting P-doped C (PC) shell, is rationally designed as an ideal catalyst for the selective hydrogenation of alkynes with high efficiency. Multiple spectroscopic analyses and density functional theory calculations have demonstrated that Pd1Fe SAA@PC is dual-regulated by lattice tensile and Schottky effects, which govern the selectivity and activity of hydrogenation, respectively. (1) The PC shell layer applied an external traction force causing a 1.2% tensile strain inside the Pd1Fe alloy to increase the reaction selectivity. (2) P doping into the C-shell layer realized a transition from a p-type semiconductor to an n-type semiconductor, thereby forming a unique Schottky junction for advancing alkyne semihydrogenation activity. The dual regulation of lattice strain and the Schottky effect ensures the excellent performance of Pd1Fe SAA@PC in the semihydrogenation reaction of phenylethylene, achieving a conversion rate of 99.9% and a selectivity of 98.9% at 4 min. These well-defined interface modulation strategies offer a practical approach for the rational design and performance optimization of semihydrogenation catalysts.

Constructing Bipolar Dual-Active Sites through High-Entropy-Induced Electric Dipole Transition for Decoupling Oxygen Redox

It remains a significant challenge to construct active sites to break the trade-off between oxidation and reduction processes occurring in battery cathodes with conversion mechanism, especially for the oxygen reduction and evolution reactions (ORR/OER) involved in the zinc-air batteries (ZABs). Here, using a high-entropy-driven electric dipole transition strategy to activate and stabilize the tetrahedral sites is proposed, while enhancing the activity of octahedral sites through orbital hybridization in a FeCoNiMnCrO spinel oxide, thus constructing bipolar dual-active sites with high-low valence states, which can effectively decouple ORR/OER. The FeCoNiMnCrO high-entropy spinel oxide with severe lattice distortion, exhibits a strong 1s→4s electric dipole transition and intense t2g(Co)/eg(Ni)-2p(OL) orbital hybridization that regulates the electronic descriptors, eg and t2g, which leads to the formation of low-valence Co tetrahedral sites (Coth) and high-valence Ni octahedral sites (Nioh), resulting in a higher half-wave potential of 0.87 V on Coth sites and a lower overpotential of 0.26 V at 10 mA cm-2 on Nioh sites as well as a superior performance of ZABs compared to low/mild entropy spinel oxides. Therefore, entropy engineering presents a distinctive approach for designing catalytic sites by inducing novel electromagnetic properties in materials across various electrocatalytic reactions, particularly for decoupling systems.

In Situ Engineering Multifunctional Active Sites of Ruthenium-Nickel Alloys for pH-Universal Ampere-Level Current-Density Hydrogen Evolution

Developing robust non-platinum electrocatalysts with multifunctional active sites for pH-universal hydrogen evolution reaction (HER) is crucial for scalable hydrogen production through electrochemical water splitting. Here ultra-small ruthenium-nickel alloy nanoparticles steadily anchored on reduced graphene oxide papers (Ru-Ni/rGOPs) as versatile electrocatalytic materials for acidic and alkaline HER are reported. These Ru-Ni alloy nanoparticles serve as pH self-adaptive electroactive species by making use of in situ surface reconstruction, where surface Ni atoms are hydroxylated to produce bifunctional active sites of Ru-Ni(OH)2 for alkaline HER, and selectively etched to form monometallic Ru active sites for acidic HER, respectively. Owing to the presence of Ru-Ni(OH)2 multi-site surface, which not only accelerates water dissociation to generate reactive hydrogen intermediates but also facilitates their recombination into hydrogen molecules, the self-supported Ru90Ni10/rGOP hybrid electrode only takes overpotential of as low as ≈106 mV to deliver current density of 1000 mA cm-2, and maintains exceptional stability for over 1000 h in 1 m KOH. While in 0.5 m H2SO4, the Ru90Ni10/rGOP hybrid electrode exhibits acidic HER catalytic behavior comparable to commercially available Pt/C catalyst due to the formation of monometallic Ru shell. These electrochemical behaviors outperform some of the best Ru-based catalysts and make it attractive alternative to Pt-based catalysts toward highly efficient HER.

Activating TiO2 through the Phase Transition-Mediated Hydrogen Spillover to Outperform Pt for Electrocatalytic pH-Universal Hydrogen Evolution

Endowing conventional materials with specific functions that are hardly available is invariably of significant importance but greatly challenging. TiO2 is proven to be highly active for the photocatalytic hydrogen evolution while intrinsically inert for electrocatalytic hydrogen evolution reaction (HER) due to its poor electrical conductivity and unfavorable hydrogen adsorption/desorption behavior. Herein, the first activation of inert TiO2 for electrocatalytic HER is demonstrated by synergistically modulating the positions of d-band center and triggering hydrogen spillover through the dual doping-induced partial phase transition. The N, F co-doping-induced partial phase transition from anatase to rutile phase in TiO2 (AR-TiO2|(N,F)) exhibits extraordinary HER performance with overpotentials of 74, 80, and 142 mV at a current density of 10 mA cm-2 in 1.0 M KOH, 0.5 M H2SO4, and 1.0 M phosphate-buffered saline electrolytes, respectively, which are substantially better than pure TiO2, and even superior to the benchmark Pt/C catalysts. These findings may open a new avenue for the development of low-cost alternative to noble metal catalysts for electrocatalytic hydrogen production.

Precise Atomic Structure Regulation of Single-Atom Platinum Catalysts toward Highly Efficient Hydrogen Evolution Reaction

Noble metal single-atom-catalysts (SACs) have demonstrated significant potential to improve atom utilization efficiency and catalytic activity for hydrogen evolution reaction (HER). However, challenges still remain in rationally modulating active sites and catalytic activities of SACs, which often results in sluggish kinetics and poor stability, especially in neutral/alkaline media. Herein, precise construction of Pt single atoms anchored on edge of 2D layered Ni(OH)2 (Pt-Ni(OH)2-E) is achieved utilizing in situ electrodeposition. Compared to the single-atom Pt catalysts anchored on the basal plane of Ni(OH)2 (Pt-Ni(OH)2-BP), the Pt-Ni(OH)2-E possesses superior electron affinity and high intrinsic catalytic activity, which favors the strong adsorption and rapid dissociation toward water molecules. As a result, the Pt-Ni(OH)2-E catalyst requires low overpotentials of 21 and 34 mV at 10 mA cm-2 in alkaline and neutral conditions, respectively. Specifically, it shows the high mass activity of 23.6 A mg-1 for Pt at the overpotential of 100 mV, outperforming the reported catalysts and commercial Pt/C. This work provides new insights into the rational design of active sites for preparing high-performance SACs.

Unraveling and Resolving the Inconsistencies in Tafel Analysis for Hydrogen Evolution Reactions

The Tafel slope represents a critical kinetic parameter for mechanistic studies of electrochemical reactions, including the hydrogen evolution reaction (HER). Linear fitting of the polarization curve in a N2-saturated electrolyte is commonly used to determine Tafel slopes, which is, however, frequently plagued with inconsistencies. Our systematic studies reveal that the Tafel slopes derived from this approach are loading- and potential-dependent, and could substantially exceed the theoretical limits. Our analyses indicate that this discrepancy is largely attributed to the locally trapped HER-generated H2 in the catalyst layer. A non-negligible hydrogen oxidation reaction (HOR) current more prominently offsets the HER current at the smaller HER overpotential regime, resulting in an artificially smaller Tafel slope. On the other hand, at the higher overpotential where the HOR current becomes negligible, the locally trapped H2 substantially suppresses further HER current growth, leading to an artificially larger Tafel slope. The Butler-Volmer method accounts for both the HER and HOR currents in the fitting, which offers a more reliable method for pure Pt catalysts but is less applicable to transition-metal decorated Pt surfaces with distinct HER/HOR kinetics. Our studies underscore the challenges in Tafel slope analysis and the need for strict controls for reliable comparisons among different catalyst systems.

Structure-driven tuning of catalytic properties of core-shell nanostructures

The annual increase in demand for renewable energy is driving the development of catalysis-based technologies that generate, store and convert clean energy by splitting and forming chemical bonds. Thanks to efforts over the last two decades, great progress has been made in the use of core-shell nanostructures to improve the performance of metallic catalysts. The successful preparation and application of a large number of bimetallic core-shell nanocrystals demonstrates the wide range of possibilities they offer and suggests further advances in this field. Here, we have reviewed recent advances in the synthesis and study of core-shell nanostructures that are promising for catalysis. Particular attention has been paid to the structural tuning of the catalytic properties of core-shell nanostructures and to theoretical methods capable of describing their catalytic properties in order to efficiently search for new catalysts with desired properties. We have also identified the most promising areas of research in this field, in terms of experimental and theoretical studies, and in terms of promising materials to be studied.

Does a Higher Density of Active Sites Indicate a Higher Reaction Rate?

A consensus view in catalysis is that a higher density of catalytically active sites indicates a higher reaction rate. Using molecular dynamics simulations capable of mimicking the electrochemical formation of gas molecules, we herein demonstrate that this view is problematic for electrocatalytic gas production. Our simulation results show that a higher density of catalytic active sites does not necessarily indicate a higher reaction rate─a high density of active sites could lead to a reduction in the rate of reaction. Further analysis reveals that this abnormal phenomenon is ascribed to aggregation of the produced gas molecules near catalytic sites. This work challenges the consensus view and lays the groundwork for better developing gas-producing reaction electrocatalysts.

Electronic configuration regulation of single-atomic Mn sites mediated by Mo/Mn clusters for an efficient hydrogen evolution reaction

Tuning the electron distribution of metal single-atom active sites via bimetallic clusters is an effective way to enhance their hydrogen evolution reaction (HER) activity, but remains a great challenge. A biochar-based electrocatalyst (BCMoMn800-2) with both MnN4 active sites and Mo2C/Mn7C3 clusters was synthesized using in situ enriched Mo/Mn biomass as a precursor to trigger the HER. Various characterization and density functional theory (DFT) calculation results indicated that the presence of Mo2C/Mn7C3 clusters in BCMoMn800-2 effectively induced the redistribution of charges at MnN4 sites, reducing the energy of H* activation during the HER. In 0.5 M H2SO4, the overpotential was 27.4 mV at a current density of 10 mA cm-2 and the Tafel slope was 31 mV dec-1, and its electrocatalytic performance was close to that of Pt/C. The electrocatalyst also exhibited excellent electrocatalytic stability and durability. This work might provide a new strategy for solid waste recycling and constructing efficient HER electrocatalysts.

Lattice-Strained Metallic Aerogels as Efficient and Anti-Poisoning Electrocatalysts for Oxygen Reduction Reaction

Lattice strain engineering optimizes the interaction between the catalytic surface and adsorbed molecules. This is done by adjusting the electron and geometric structure of the metal site to achieve high electrochemical performance, but, to date, it has been rarely reported on anti-poisoned oxygen reduction reaction (ORR). Herein, lattice-strained Pd@PdBiCo quasi core-shell metallic aerogels (MAs) were designed by "one-pot and two-step" method for anti-poisoned ORR. Pd@PdBiCo MAs/C maintain their original activity (1.034 A mgPd -1 ) in electrolytes with CH3 OH and CO at 0.85 V vs. reversible hydrogen electrode (RHE), outperforming the commercial Pd/C (0.156 A mgPd -1 ), Pd MAs/C (0.351 A mgPd -1 ), and PdBiCo MAs/C (0.227 A mgPd -1 ). Moreover, Pd@PdBiCo MAs/C also show high stability and anti-poisoning with negligible activity decay after 8000 cycles in 0.1 m KOH+0.3 m CH3 OH. These results of X-ray photoelectron spectroscopy, CO stripping, and diffuses reflectance FTIR spectroscopy reveal that the tensile strain and strong interaction between different elements of Pd@PdBiCo MAs/C effectively optimize the electronic structure to promote O2 adsorption and activation, while suppressing CH3 OH oxidation and CO adsorption, leading to high ORR activity and anti-poisoning property. This work inspires the rational design of MAs in fuel cells and beyond.

Intrinsic Strain-Mediated Ultrathin Ceria Nanoantioxidant

Metal oxide nanozymes have emerged as the most efficient and promising candidates to mimic antioxidant enzymes for treatment of oxidative stress-mediated pathophysiological disorders, but the current effectiveness is unsatisfactory due to insufficient catalytic performance. Here, we report for the first time an intrinsic strain-mediated ultrathin ceria nanoantioxidant. Surface strain in ceria with variable thicknesses and coordinatively unsaturated Ce sites was investigated by theoretical calculation analysis and then was validated by preparing ∼1.2 nm ultrathin nanoplates with ∼3.0% tensile strain in plane/∼10.0% tensile strain out of plane. Compared with nanocubes, surface strain in ultrathin nanoplates could enhance the covalency of the Ce-O bond, leading to increasing superoxide dismutase (SOD)-mimetic activity by ∼2.6-fold (1533 U/mg, in close proximity to that of natural SOD) and total antioxidant activity by ∼2.5-fold. As a proof of concept, intrinsic strain-mediated ultrathin ceria nanoplates could boost antioxidation for improved ischemic stroke treatment in vivo, significantly better than edaravone, a commonly used clinical drug.

Emergent Magnetism with Continuous Control in the Ultrahigh-Conductivity Layered Oxide PdCoO2

The current challenge to realizing continuously tunable magnetism lies in our inability to systematically change properties, such as valence, spin, and orbital degrees of freedom, as well as crystallographic geometry. Here, we demonstrate that ferromagnetism can be externally turned on with the application of low-energy helium implantation and can be subsequently erased and returned to the pristine state via annealing. This high level of continuous control is made possible by targeting magnetic metastability in the ultrahigh-conductivity, nonmagnetic layered oxide PdCoO2 where local lattice distortions generated by helium implantation induce the emergence of a net moment on the surrounding transition metal octahedral sites. These highly localized moments communicate through the itinerant metal states, which trigger the onset of percolated long-range ferromagnetism. The ability to continuously tune competing interactions enables tailoring precise magnetic and magnetotransport responses in an ultrahigh-conductivity film and will be critical to applications across spintronics.

Amorphous nickel hydroxide shell tailors local chemical environment on platinum surface for alkaline hydrogen evolution reaction

In analogy to natural enzymes, an elaborated design of catalytic systems with a specifically tailored local chemical environment could substantially improve reaction kinetics, effectively combat catalyst poisoning effect and boost catalyst lifetime under unfavourable reaction conditions. Here we report a unique design of 'Ni(OH)2-clothed Pt-tetrapods' with an amorphous Ni(OH)2 shell as a water dissociation catalyst and a proton conductive encapsulation layer to isolate the Pt core from bulk alkaline electrolyte while ensuring efficient proton supply to the active Pt sites. This design creates a favourable local chemical environment to result in acidic-like hydrogen evolution reaction kinetics with a lowest Tafel slope of 27 mV per decade and a record-high specific activity and mass activity in alkaline electrolyte. The proton conductive Ni(OH)2 shell can also effectively reject impurity ions and retard the Oswald ripening, endowing a high tolerance to solution impurities and exceptional long-term durability that is difficult to achieve in the naked Pt catalysts. The markedly improved hydrogen evolution reaction activity and durability in an alkaline medium promise an attractive catalyst material for alkaline water electrolysers and renewable chemical fuel generation.

Controlled synthesis of ACo2O4 (A = Fe, Cu, Zn, Ni) as an environmentally friendly electrocatalyst for urea electrolysis

Water electrolysis is relatively an environmentally friendly hydrogen production technology, but due to the slow transfer of four electrons in the anodic oxidation reaction, it needs a theoretical voltage of up to 1.23 V. Therefore, in this experiment, a series of transition metal oxides, ACo₂O₄ (A = Fe, Cu, Zn, Ni), was synthesized on Ni foam current collectors by a hydrothermal and calcination method, and the material was applied in urea electrolysis to produce hydrogen. What is noteworthy is that the CuCo₂O₄ electrode has a unique flower-like nanoneedle structure, and has a larger electrochemical active area, more reactive active sites, and a faster charge transfer rate. In 1.0 M KOH and 0.5 M urea solution, CuCo₂O₄ provides a potential of only 1.268 V at a current density of 10 mA cm^-2 during the urea oxidation reaction (UOR), while in 1.0 M KOH solution, with the same current density, the oxygen evolution reaction (OER) is required to provide a potential of 1.53 V, indicating that the UOR can effectively replace the OER. Density functional theory calculations show that the CuCo₂O₄ material exhibits Gibbs free energy of the hydrogen closest to zero, thus promoting the electrochemistry performance of the electrode. In a cell composed of CuCo₂O₄//CuCo₂O₄, the current density of 10 mA cm^-2 can be achieved by providing a potential of only 1.509 V. This work offers a novel scheme for reducing energy consumption of the OER and improving catalytic performance of the UOR.

Molecular Engineering of Metal-Organic Frameworks as Efficient Electrochemical Catalysts for Water Oxidation

Metal-organic framework (MOF) solids with their variable functionalities are relevant for energy conversion technologies. However, the development of electroactive and stable MOFs for electrocatalysis still faces challenges. Here, a molecularly engineered MOF system featuring a 2D coordination network based on mercaptan-metal links (e.g., nickel, as for Ni(DMBD)-MOF) is designed. The crystal structure is solved from microcrystals by a continuous-rotation electron diffraction (cRED) technique. Computational results indicate a metallic electronic structure of Ni(DMBD)-MOF due to the Ni-S coordination, highlighting the effective design of the thiol ligand for enhancing electroconductivity. Additionally, both experimental and theoretical studies indicate that (DMBD)-MOF offers advantages in the electrocatalytic oxygen evolution reaction (OER) over non-thiol (e.g., 1,4-benzene dicarboxylic acid) analog (BDC)-MOF, because it poses fewer energy barriers during the rate-limiting *O intermediate formation step. Iron-substituted NiFe(DMBD)-MOF achieves a current density of 100 mA cm^-2 at a small overpotential of 280 mV, indicating a new MOF platform for efficient OER catalysis.

Superaerophilic/superaerophobic cooperative electrode for efficient hydrogen evolution reaction via enhanced mass transfer

Hydrogen evolution reaction (HER), as an effective method to produce green hydrogen, is greatly impeded by inefficient mass transfer, i.e., bubble adhesion on electrode, bubble dispersion in the vicinity of electrode, and poor dissolved H₂ diffusion, which results in blocked electrocatalytic area and large H₂ concentration overpotential. Here, we report a superaerophilic/superaerophobic (SAL/SAB) cooperative electrode to efficiently promote bubble transfer by asymmetric Laplace pressure and accelerate dissolved H₂ diffusion through reducing diffusion distance. Benefiting from the enhanced mass transfer, the overpotential for the SAL/SAB cooperative electrode at -10 mA cm^-2 is only -19 mV, compared to -61 mV on the flat Pt electrode. By optimizing H₂SO₄ concentration, the SAL/SAB cooperative electrode can achieve ultrahigh current density (-1867 mA cm^-2) at an overpotential of -500 mV. We can envision that the SAL/SAB cooperative strategy is an effective method to improve HER efficiency and stimulate the understanding of various gas-involved processes.

Structural Reconstruction of Catalysts in Electroreduction Reaction: Identifying, Understanding, and Manipulating

Electroreduction transformation of small molecules (CO₂ , N₂ , and H₂ O) into chemical feedstocks offers a promising approach to eliminate carbon emissions and harness renewable energy. Most cathodic catalysts often undergo structural transformation under operating electroreduction conditions. These structural reconstructions are reflected in changes in their catalytic activity. In-depth understanding of the change of active sites and influence parameters of reconstruction behaviors is an essential precondition for the design of highly efficient catalysts. Despite the previous achievements, comprehensive insight toward the structural evolution mechanism in cathodic catalysts, compared to anode ones, under reaction conditions is still lacking. Herein, an overview of structural reconstruction for cathodic catalysts in terms of fundamental mechanisms, reconstruction process, advanced characterizations, and influencing parameters is provided. On this basis, the typical strategies for manipulating the structural reconfiguration of catalysts are also explicitly discussed from the catalyst structure and working environment. By delivering the mechanism, strategies, insights, and techniques, this review will provide a comprehensive understanding of the structural reconstruction of cathodic catalysts in electroreduction reactions and future guidelines for their rational development.

Corrosion Chemistry of Electrocatalysts

Electrocatalysts are the core components of many sustainable energy conversion technologies that are considered the most potential solution to the worldwide energy and environmental crises. The reliability of structure and composition pledges that electrocatalysts can achieve predictable and stable performance. However, during the electrochemical reaction, electrocatalysts are influenced directly by the applied potential, the electrolyte, and the adsorption/desorption of reactive species, triggering structural and compositional corrosion, which directly affects the catalytic behaviors of electrocatalysts (performance degradation or enhancement) and invalidates the established structure-activity relationship. Therefore, it is necessary to elucidate the corrosion behavior and mechanism of electrocatalysts to formulate targeted corrosion-resistant strategies or use corrosion reconstruction synthesis techniques to guide the preparation of efficient and stable electrocatalysts. Herein, the most recent developments in electrocatalyst corrosion chemistry are outlined, including corrosion mechanisms, mitigation strategies, and corrosion syntheses/reconstructions based on typical materials and important electrocatalytic reactions. Finally, potential opportunities and challenges are also proposed to foresee the possible development in this field. It is believed that this contribution will raise more awareness regarding nanomaterial corrosion chemistry in energy technologies and beyond.

Strain-regulated Gibbs free energy enables reversible redox chemistry of chalcogenides for sodium ion batteries

Manipulating the reversible redox chemistry of transition metal dichalcogenides for energy storage often faces great challenges as it is difficult to regulate the discharged products directly. Herein we report that tensile-strained MoSe₂ (TS-MoSe₂) can act as a host to transfer its strain to corresponding discharged product Mo, thus contributing to the regulation of Gibbs free energy change (ΔG) and enabling a reversible sodium storage mechanism. The inherited strain results in lattice distortion of Mo, which adjusts the d-band center upshifted closer to the Fermi level to enhance the adsorbability of Na₂Se, thereby leading to a decreased ΔG of the redox chemistry between Mo/Na₂Se and MoSe₂. Ex situ and in situ experiments revealed that, unlike the unstrained MoSe₂, TS-MoSe₂ shows a highly reversible sodium storage, along with an evidently improved reaction kinetics. This work sheds light on the study on electrochemical energy storage mechanism of other electrode materials.

Manipulating the redox chemistry of transition metal dichalcogenides still faces challenges. Here the authors report that tensile-strained MoSe2 can pass on the strain to its sodiated product Mo, and thus regulate the Gibbs free energy in the charging process to enable the reversible sodium storage.

Water-Enabled H2 Generation from Hydrogenated Silicon Nanosheets for Efficient Anti-Inflammation

As an emerging therapeutic gas, hydrogen (H₂) is gifted with excellent biosafety, high tissue permeability, and radical-trapping capacity and is extensively considered as a highly promising antioxidant in clinics. However, a facile and effective strategy of H₂ production for major inflammatory disease treatments is still lacking. In this study, by a facile wet-chemical exfoliation synthesis, a hydrogen-terminated silicon nanosheet (H-silicene) has been synthesized, which can favorably react with environmental water to generate H₂ rapidly and continuously without any external energy input. Furthermore, theoretical calculations were employed to reveal the mechanism of enhanced H₂ generation efficacy of H-silicene nanosheets. The as-synthesized H-silicene has been explored as a flexible hydrogen gas generator for efficient antioxidative stress application for the first time, which highlights a promising prospect of this two-dimensional H-silicene nanomaterial for acute inflammatory treatments by on-demand H₂ production-enabled reactive oxygen species scavenging. This study provides a novel and efficient modality for nanomaterial-mediated H₂ therapy.

Strain Engineering: A Boosting Strategy for Photocatalysis

Whilst the photocatalytic technique is considered to be one of the most significant routes to address the energy crisis and global environmental challenges, the solar-to-chemical conversion efficiency is still far from satisfying practical industrial requirements, which can be traced to the suboptimal bandgap and electronic structure of photocatalysts. Strain engineering is a universal scheme that can finely tailor the bandgap and electronic structure of materials, hence supplying a novel avenue to boost their photocatalytic performance. Accordingly, to explore promising directions for certain breakthroughs in strained photocatalysts, an overview on the recent advances of strain engineering from the basics of strain effect, creations of strained materials, as well as characterizations and simulations of strain level is provided. Besides, the potential applications of strain engineering in photocatalysis are summarized, and a vision for the future controllable-electronic-structure photocatalysts by strain engineering is also given. Finally, perspectives on the challenges for future strain-promoted photocatalysis are discussed, placing emphasis on the creation and decoupling of strain effect, and the modification of theoretical frameworks.

A Tandem Interfaced (Ni3 S2 -MoS2 )@TiO2 Composite Fabricated by Atomic Layer Deposition as Efficient HER Electrocatalyst

Reported herein is a highly active and durable hydrogen evolution reaction (HER) electrocatalyst, which is constructed following a tandem interface strategy and functional in alkaline and even neutral medium (pH ≈ 7). The ternary composite material, consisting of conductive nickel foam (NF) substrate, Ni₃ S₂ -MoS₂ heterostructure, and TiO₂ coating, is synthesized by the hydrothermal method and atomic layer deposition (ALD) technique. Representative results include: (1) versatile characterizations confirm the proposed composite structure and strong electronic interactions among comprised sulfide and oxide species; (2) the material outperforms commercial Pt/C by recording an overpotential of 115 mV and a Tafel slope of 67 mV dec^-1 under neutral conditions. A long-term stability in alkaline electrolytes up to 200 h and impressive overall water splitting behavior (1.56 V @ 10 mA cm^-2 ) are documented; (3) implementation of ALD oxide tandem layer is crucial to realize the design concept with superior HER performance by modulating a variety of heterointerface and intermediates electronic structure.

Platinum Cluster/Carbon Quantum Dots Derived Graphene Heterostructured Carbon Nanofibers for Efficient and Durable Solar-Driven Electrochemical Hydrogen Evolution

Large scale solar-driven hydrogen production is a crucial step toward decarbonizing society. However, the solar-to-hydrogen (STH) conversion efficiency, long-term stability, and cost-effectiveness in hydrogen evolution reaction (HER) still need to be improved. Herein, an efficient approach is demonstrated to produce low-dimensional Pt/graphene-carbon nanofibers (CNFs)-based heterostructures for bias-free, highly efficient, and durable HER. Carbon dots are used as efficient building blocks for the in situ formation of graphene along the CNFs surface. The presence of graphene enhances the electronic conductivity of CNFs to ≈3013.5 S m^-1  and simultaneously supports the uniform Pt clusters growth and efficient electron transport during HER. The electrode with a low Pt loading amount (3.4 µg cm^-2 ) exhibits a remarkable mass activity of HER in both acidic and alkaline media, which is significantly better than that of commercial Pt/C (31 µg cm^-2  of Pt loading). In addition, using a luminescent solar concentrator-coupled solar cell to provide voltage, the bias-free water splitting system exhibits an STH efficiency of 0.22% upon one-sun illumination. These results are promising toward using low-dimensional heterostructured catalysts for future energy storage and conversion applications.

Hydrogen spillover in complex oxide multifunctional sites improves acidic hydrogen evolution electrocatalysis

Improving the catalytic efficiency of platinum for the hydrogen evolution reaction is valuable for water splitting technologies. Hydrogen spillover has emerged as a new strategy in designing binary-component Pt/support electrocatalysts. However, such binary catalysts often suffer from a long reaction pathway, undesirable interfacial barrier, and complicated synthetic processes. Here we report a single-phase complex oxide La₂Sr₂PtO_7+δ as a high-performance hydrogen evolution electrocatalyst in acidic media utilizing an atomic-scale hydrogen spillover effect between multifunctional catalytic sites. With insights from comprehensive experiments and theoretical calculations, the overall hydrogen evolution pathway proceeds along three steps: fast proton adsorption on O site, facile hydrogen migration from O site to Pt site via thermoneutral La-Pt bridge site serving as the mediator, and favorable H₂ desorption on Pt site. Benefiting from this catalytic process, the resulting La₂Sr₂PtO_7+δ exhibits a low overpotential of 13 mV at 10 mA cm⁻², a small Tafel slope of 22 mV dec⁻¹, an enhanced intrinsic activity, and a greater durability than commercial Pt black catalyst.

While renewable H₂ production offers a promising route for clean energy production, there is an urgent need to improve catalyst performances. Here, authors design a Pt-containing complex oxide that utilizes atomic-scale hydrogen spillover to promote H₂ evolution electrocatalysis in acidic media.

Strategies for Electrochemically Sustainable H2 Production in Acid

Acidified water electrolysis with fast kinetics is widely regarded as a promising option for producing H₂ . The main challenge of this technique is the difficulty in realizing sustainable H₂ production (SHP) because of the poor stability of most electrode catalysts, especially on the anode side, under strongly acidic and highly polarized electrochemical environments, which leads to surface corrosion and performance degradation. Research efforts focused on tuning the atomic/nano structures of catalysts have been made to address this stability issue, with only limited effectiveness because of inevitable catalyst degradation. A systems approach considering reaction types and system configurations/operations may provide innovative viewpoints and strategies for SHP, although these aspects have been overlooked thus far. This review provides an overview of acidified water electrolysis for systematic investigations of these aspects to achieve SHP. First, the fundamental principles of SHP are discussed. Then, recent advances on design of stable electrode materials are examined, and several new strategies for SHP are proposed, including fabrication of symmetrical heterogeneous electrolysis system and fluid homogeneous electrolysis system, as well as decoupling/hybrid-governed sustainability. Finally, remaining challenges and corresponding opportunities are outlined to stimulate endeavors toward the development of advanced acidified water electrolysis techniques for SHP.

Modulating the Electronic Structure of Nickel Sulfide Electrocatalysts by Chlorine Doping toward Highly Efficient Alkaline Hydrogen Evolution

The exploration of indurative and stable low-cost catalysts for hydrogen evolution reaction (HER) is of great importance for hydrogen energy economy, but it still faces challenges. Herein, we report a Cl-doped Ni₃S₂ (Cl-Ni₃S₂) nanoplate catalyst vertically grown on Ni foam with outstanding activity and durability for HER, which only requires an overpotential of 67 mV to reach a current density of 10 mA cm^-2 in alkaline media and exhibits negligible degradation after 30 h of operation. Both the advanced X-ray absorption fine structure (XAFS) and density functional theory (DFT) calculation validate that Cl doping can optimize the electronic structure and the intrinsic activity of Ni₃S₂. This study devoted to the revelation of the impact of ionic doping on the activity of catalysts at the atomic scale can provide the direction for the rational design of novel and advanced HER electrocatalysts.

Ultrahigh-Current-Density and Long-Term-Durability Electrocatalysts for Water Splitting

Hydrogen economy is imagined where excess electric energy from renewable sources stored directly by electrochemical water splitting into hydrogen is later used as clean hydrogen fuel. Electrocatalysts with the superhigh current density (1000 mA cm^-2 -level) and long-term durability (over 1000 h), especially at low overpotentials (<300 mV), seem extremely critical for green hydrogen from experiment to industrialization. Along the way, numerous innovative ideas are proposed to design high efficiency electrocatalysts in line with industrial requirements, which also stimulates the understanding of the mass/charge transfer and mechanical stability during the electrochemical process. It is of great necessity to summarize and sort out the accumulating knowledge in time for the development of laboratory to commercial use in this promising field. This review begins with examining the theoretical principles of achieving high-efficiency electrocatalysts with high current densities and excellent durability. Special attention is paid to acquaint efficient strategies to design perfect electrocatalysts including atomic structure regulation for electrical conductivity and reaction energy barrier, array configuration constructing for mass transfer process, and multiscale coupling for high mechanical strength. Finally, the importance and the personal perspective on future opportunities and challenges, is highlighted.

In situ construction of FeNi2Se4-FeNi LDH heterointerfaces with electron redistribution for enhanced overall water splitting

The abundant heterogeneous interfaces between the FeNi2Se4 and FeNi LDH can provide enriched active sites and accelerate reaction kinetics, which improves the overall water splitting performance.

N, P co-doping triggered phase transition of MoS2 with enlarged interlayer spacing for efficient hydrogen evolution

Molybdenum disulfide (MoS2)-based transition-metal chalcogenides are considered to be cost-efficient, environmentally-friendly, and stable materials in the application of electrocatalytic hydrogen production.

Lattice site-dependent metal leaching in perovskites toward a honeycomb-like water oxidation catalyst

Metal leaching during water oxidation has been typically observed in conjunction with surface reconstruction on perovskite oxide catalysts, but the role of metal leaching at each geometric site has not been distinguished. Here, we manipulate the occurrence and process of surface reconstruction in two model ABO₃ perovskites, i.e., SrSc_0.5Ir_0.5O₃ and SrCo_0.5Ir_0.5O₃, which allow us to evaluate the structure and activity evolution step by step. The occurrence and order of leaching of Sr (A-site) and Sc/Co (B-site) were controlled by tailoring the thermodynamic stability of B-site. Sr leaching from A-site mainly generates more electrochemical surface area for the reaction, and additional leaching of Sc/Co from B-site triggers the formation of a honeycomb-like IrO_xH_y phase with a notable increase in intrinsic activity. A thorough surface reconstruction with dual-site metal leaching induces an activity improvement by approximately two orders of magnitude, which makes the reconstructed SrCo_0.5Ir_0.5O₃ among the best for water oxidation in acid.

Conductive CuCo-Based Bimetal Organic Framework for Efficient Hydrogen Evolution

Metal-organic frameworks (MOFs) with intrinsically porous structures and well-dispersed metal sites are promising candidates for electrocatalysis; however, the catalytic efficiencies of most MOFs are significantly limited by their impertinent adsorption/desorption energy of intermediates formed during electrocatalysis and very low electrical conductivity. Herein, Co is introduced into conductive Cu-catecholate (Cu-CAT) nanorod arrays directly grown on a flexible carbon cloth for hydrogen evolution reaction (HER). Electrochemical results show that the Co-incorporated Cu-CAT nanorod arrays only need 52 and 143 mV overpotentials to drive a current density of 10 mA cm^-2 in alkaline and neutral media for HER, respectively, much lower than most of the reported non-noble metal-based electrocatalysts and comparable to the benchmark Pt/C electrocatalyst. Density functional theory calculations show that the introduction of Co can optimize the adsorption energy of hydrogen (ΔG_H* ) of Cu sites, almost close to that of Pt (111). Furthermore, the adsorption energy of water ( Δ E H 2 O ) of Co sites in the CuCo-CAT is significantly lower than that of Cu sites upon coupling Cu with Co, effectively accelerating the Volmer step in the HER process. The findings, synergistic effect of bimetals, open a new avenue for the rational design of highly efficient MOF-based electrocatalysts.

In situ surface reduction for accessing atomically dispersed platinum on carbon sheets for acidic hydrogen evolution

Exploring the simple yet well-controlled synthesis of atomically dispersed Pt catalysts is a crucial endeavour for harvesting clean hydrogen via the kinetics-favoured acidic electrochemical water splitting technique. Here we employed the use of defective carbon sheets by KOH etching as a substrate for the in situ surface reduction of Pt(IV) ions to prepare atomically dispersed Pt. Physical and electrochemical characterizations reveal a strong interaction between the carbon substrate and Pt species, providing the basis for the in situ surface reduction. The atomically dispersed Pt electrocatalyst exhibited high HER performance in a sulfuric acid electrolyte, with an overpotential as low as 55 mV at a current density of 100 mA cm^-a, and better catalytic durability compared to the commercial Pt/C. The mechanism study revealed that the full utilization of atomically dispersed Pt and the optimized catalyst surface may enhance the recombination of adsorbed *H via the Volmer-Tafel mechanism to produce H₂ at a high efficiency. In the light of high activity, durability, and low cost, the atomically dispersed Pt material is promising for acidic HER application.

Stroboscopic operando spectroscopy of the dynamics in heterogeneous catalysis by event-averaging

Heterogeneous catalyst surfaces are dynamic entities that respond rapidly to changes in their local gas environment, and the dynamics of the response is a decisive factor for the catalysts’ action and activity. Few probes are able to map catalyst structure and local gas environment simultaneously under reaction conditions at the timescales of the dynamic changes. Here we use the CO oxidation reaction and a Pd(100) model catalyst to demonstrate how such studies can be performed by time-resolved ambient pressure photoelectron spectroscopy. Central elements of the method are cyclic gas pulsing and software-based event-averaging by image recognition of spectral features. A key finding is that at 3.2 mbar total pressure a metallic, predominantly CO-covered metallic surface turns highly active for a few seconds once the O₂:CO ratio becomes high enough to lift the CO poisoning effect before mass transport limitations triggers formation of a √5 oxide.

To follow in situ and in real time how catalyst surfaces respond to gas composition changes is a challenge. This study reports on an eventaveraging method, based on cyclic gas pulsing and software-based image recognition, that overcomes the challenge for large photoelectron spectroscopy datasets.

Nitrogen-Doped Reduced Graphene Oxide Supported Pd4.7Ru Nanoparticles Electrocatalyst for Oxygen Reduction Reaction

It is imperative to design an inexpensive, active, and durable electrocatalyst in oxygen reduction reaction (ORR) to replace carbon black supported Pt (Pt/CB). In this work, we synthesized Pd_4.7Ru nanoparticles on nitrogen-doped reduced graphene oxide (Pd_4.7Ru NPs/NrGO) by a facile microwave-assisted method. Nitrogen atoms were introduced into the graphene by thermal reduction with NH₃ gas and several nitrogen atoms, such as pyrrolic, graphitic, and pyridinic N, found by X-ray photoelectron spectroscopy. Pyridinic nitrogen atoms acted as efficient particle anchoring sites, making strong bonding with Pd_4.7Ru NPs. Additionally, carbon atoms bonding with pyridinic N facilitated the adsorption of O₂ as Lewis bases. The uniformly distributed ~2.4 nm of Pd_4.7Ru NPs on the NrGO was confirmed by transmission electron microscopy. The optimal composition between Pd and Ru is 4.7:1, reaching −6.33 mA/cm² at 0.3 V_RHE for the best ORR activity among all measured catalysts. Furthermore, accelerated degradation test by electrochemical measurements proved its high durability, maintaining its initial current density up to 98.3% at 0.3 V_RHE and 93.7% at 0.75 V_RHE, whereas other catalysts remained below 90% at all potentials. These outcomes are considered that the doped nitrogen atoms bond with the NPs stably, and their electron-rich states facilitate the interaction with the reactants on the surface. In conclusion, the catalyst can be applied to the fuel cell system, overcoming the high cost, activity, and durability issues.

Adjusting the d-band center of metallic sites in NiFe-based Bimetal-organic frameworks via tensile strain to achieve High-performance oxygen electrode catalysts for Lithium-oxygen batteries

Developing effective electrocatalyst and fundamentally understanding the corresponding working mechanism are both urgently desired to overcome the current challenges facing lithium-oxygen batteries (LOBs). Herein, a series of NiFe-based bimetal-organic frameworks (NiFe-MOFs) with certain internal tensile strain are fabricated via a simple organic linker scission strategy, and served as cathode catalysts for LOBs. The introduced tensile strain broadens the inherent interatomic distances, leading to an upshifted d-band center of metallic sites and thus the enhancement of the adsorption strength of catalysts surface towards intermediates, which is contributed to rationally regulate the crystallinity of discharge product Li₂O₂. As a result, the uniformly distributed amorphous film-like Li₂O₂ tightly deposits on the surface of strain-regulated MOF, resulting in excellent electrochemical performance of LOBs, including a large discharge capacity of 12317.4 mAh g^-1 at 100 mA g^-1 and extended long-term cyclability of 357 cycles. This work presents a novel insight in adjusting the adsorption strength of cathode catalysts towards intermediates via introducing tensile strain in catalysts, which is a pragmatic strategy for improving the performance of LOBs.

Segmentation of Static and Dynamic Atomic-Resolution Microscopy Data Sets with Unsupervised Machine Learning Using Local Symmetry Descriptors

We present an unsupervised machine learning approach for segmentation of static and dynamic atomic-resolution microscopy data sets in the form of images and video sequences. In our approach, we first extract local features via symmetry operations. Subsequent dimension reduction and clustering analysis are performed in feature space to assign pattern labels to each pixel. Furthermore, we propose the stride and upsampling scheme as well as separability analysis to speed up the segmentation process of image sequences. We apply our approach to static atomic-resolution scanning transmission electron microscopy images and video sequences. Our code is released as a python module that can be used as a standalone program or as a plugin to other microscopy packages.

Tungsten Oxide/Reduced Graphene Oxide Aerogel with Low-Content Platinum as High-Performance Electrocatalyst for Hydrogen Evolution Reaction

Designing cost-effective, highly active, and durable platinum (Pt)-based electrocatalysts is a crucial endeavor in electrochemical hydrogen evolution reaction (HER). Herein, the low-content Pt (0.8 wt%)/tungsten oxide/reduced graphene oxide aerogel (LPWGA) electrocatalyst with excellent HER activity and durability is developed by employing a tungsten oxide/reduced graphene oxide aerogel (WGA) obtained from a facile solvothermal process as a support, followed by electrochemical deposition of Pt nanoparticles. The WGA support with abundant oxygen vacancies and hierarchical pores plays the roles of anchoring the Pt nanoparticles, supplying continuous mass transport and electron transfer channels, and modulating the surface electronic state of Pt, which endow the LPWGA with both high HER activity and durability. Even under a low loading of 0.81 μg_Pt cm^-2 , the LPWGA exhibits a high HER activity with an overpotential of 42 mV at 10 mA cm^-2 , an excellent stability under 10000-cycle cyclic voltammetry and 40 h chronopotentiometry at 10 mA cm^-2 , a low Tafel slope (30 mV dec^-1 ), and a high turnover frequency of 29.05 s^-1 at η = 50 mV, which is much superior to the commercial Pt/C and the low-content Pt/reduced graphene oxide aerogel. This work provides a new strategy to design high-performance Pt-based electrocatalysts with greatly reduced use of Pt.

Engineering sulfur vacancies into Fe9S10 nanosheet arrays for efficient alkaline hydrogen evolution

The development of Earth-abundant transition metal sulfide electrocatalysts with excellent activity and stability toward the alkaline hydrogen evolution reaction (HER) is critical but challenging. Iron-based sulfides are favored due to their economic benefits and good stability, but their intrinsic catalytic activity still needs to be improved urgently. Herein, we successfully prepared Fe₉S₁₀ nanosheet arrays on iron foam (Fe₉S₁₀/IF) through a simple one-step method and utilized plasma treatment to introduce S vacancies (Fe₉S₁₀-V_s/IF) to regulate their intrinsic catalytic activity. The final materials demonstrate excellent HER performance, and only need 149 mV to drive a current density of 10 mA cm^-2 and a small Tafel slope of 50 mV dec^-1. The experimental results show that the existence of S vacancies can enhance their intrinsic electrocatalytic activity. This work provides a reference value for the future regulation of iron-based sulfides and is devoted to the development of non-precious metal catalysts toward the HER.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

A strategy for preparing high-efficiency and economical catalytic electrodes toward overall water splitting

Electrolyzing water technology to prepare high-purity hydrogen is currently an important field in energy development. However, the preparation of efficient, stable, and inexpensive hydrogen production technology from electrolyzed water is a major problem in hydrogen energy production. The key technology for hydrogen production from water electrolysis is to prepare highly efficient catalytic, stable and durable electrodes, which are used to reduce the overpotential of the hydrogen evolution reaction and the oxygen evolution reaction of electrolyzed water. The main strategies for preparing catalytic electrodes include: (i) choosing cheap, large specific surface area and stable base materials, (ii) modulating the intrinsic activity of the catalytic material through elemental doping and lattice changes, and (iii) adjusting the morphology and structure to increase the catalytic activity. Based on these findings, herein, we review the recent work in the field of hydrogen production by water electrolysis, introduce the preparation of catalytic electrodes based on nickel foam, carbon cloth and new flexible materials, and summarize the catalytic performance of metal oxides, phosphides, sulfides and nitrides in the hydrogen evolution and oxygen evolution reactions. Secondly, parameters such as the overpotential, Tafel slope, active site, turnover frequency, and stability are used as indicators to measure the performance of catalytic electrode materials. Finally, taking the material cost of the catalytic electrode as a reference, the successful preparations are comprehensively compared. The overall aim is to shed some light on the exploration of high-efficiency and economical electrodes in energy chemistry and also demonstrate that there is still room for discovering new combinations of electrodes including base materials, composition lattice changes and morphologies.

Ordered clustering of single atomic Te vacancies in atomically thin PtTe2 promotes hydrogen evolution catalysis

Exposing and stabilizing undercoordinated platinum (Pt) sites and therefore optimizing their adsorption to reactive intermediates offers a desirable strategy to develop highly efficient Pt-based electrocatalysts. However, preparation of atomically controllable Pt-based model catalysts to understand the correlation between electronic structure, adsorption energy, and catalytic properties of atomic Pt sites is still challenging. Herein we report the atomically thin two-dimensional PtTe₂ nanosheets with well-dispersed single atomic Te vacancies (Te-SAVs) and atomically well-defined undercoordinated Pt sites as a model electrocatalyst. A controlled thermal treatment drives the migration of the Te-SAVs to form thermodynamically stabilized, ordered Te-SAV clusters, which decreases both the density of states of undercoordinated Pt sites around the Fermi level and the interacting orbital volume of Pt sites. As a result, the binding strength of atomically defined Pt active sites to H intermediates is effectively reduced, which renders PtTe₂ nanosheets highly active and stable in hydrogen evolution reaction.

Precisely regulating Pt catalytic sites is important and challenging. Herein the authors engineer the clustering of single atomic Te vacancies in atomically thin PtTe₂ to optimize the electronic structure, adsorption energy, and catalytic performance of atomically defined Pt sites.

Hierarchical iron molybdate nanostructure array for efficient water oxidation through optimizing electron density

The water oxidation reaction plays a major role in many alternative-energy systems because it provides the electrons and protons required for the use of renewable electricity. We report the tuning of the iron molybdate (FeMoO₄) electron structure via a coupled interface between the catalytic centers and the substrate. Our developed FeMoO₄ catalysts can provide a 50 mA cm^-2 current density at 1.506 V vs. RHE with excellent stability in 1.0 M KOH. The improved performance can be ascribed to the synergy of the optimized electronic structures and hierarchical nanostructure.

Exclusive Strain Effect Boosts Overall Water Splitting in PdCu/Ir Core/Shell Nanocrystals

Core/shell nanocatalysts are a class of promising materials, which achieve the enhanced catalytic activities through the synergy between ligand effect and strain effect. However, it has been challenging to disentangle the contributions from the two effects, which hinders the rational design of superior core/shell nanocatalysts. Herein, we report precise synthesis of PdCu/Ir core/shell nanocrystals, which can significantly boost oxygen evolution reaction (OER) via the exclusive strain effect. The heteroepitaxial coating of four Ir atomic layers onto PdCu nanoparticle gives a relatively thick Ir shell eliminating the ligand effect, but creates a compressive strain of ca. 3.60%. The strained PdCu/Ir catalysts can deliver a low OER overpotential and a high mass activity. Density functional theory (DFT) calculations reveal that the compressive strain in Ir shell downshifts the d-band center and weakens the binding of the intermediates, causing the enhanced OER activity. The compressive strain also boosts hydrogen evolution reaction (HER) activity and the strained nanocrystals can be served as excellent catalysts for both anode and cathode in overall water-splitting electrocatalysis.