Role of peroxide ions in formation of graphene nanosheets by electrochemical exfoliation of graphite

To-Pack or Not-to-Pack: Towards Improved Graphite Electrochemical Oxidation Through Electrode Design

Fabrication of batch-wise efficient, user- and environmentally-friendly, and well-defined yield methods for the synthesis of graphite oxide, the main precursor to graphene oxide and its reduced derivative, is an essential and robust research field, yet is sparingly investigated or innovated in recent years. This concept review showcases recent potential advances in the fabrication of electrochemical electrodes that meet aforementioned design parameters, wherein working electrode construction is seen to play a key role in shaping the yield characteristics and aiding the mechanistic understanding of efficiency of adopted methods. Particularly, those advances pave the way for new and various tunable design parameters by fabricating different methods of encapsulating graphite powder instead of using conventional bare monolith forms of graphite as working electrode. Encapsulation geometry, pressure, and matrix material, as well as powder size are examples of such tunable design parameters which are lacking in the monolith methods. The encapsulation validates authenticity of real-time monitoring of electrochemical intercalation, exfoliation, and oxidation of graphite powder, thereby offering excellent and well-defined control on yield.

Unlocking Bright and Switchable Dimeric Singlet Oxygen Electrochemiluminescence by Surface Engineering

Visible electrochemiluminescence (ECL) of singlet oxygen (1O2) from the dimeric 1Δg state is a versatile and cost-efficient tool for sensing and imaging in various application fields such as biochemistry, pharmaceuticals, and material science. However, its implementation is hindered by weak emission and complex generation mechanisms. In this work, we enable a bright and switchable dimeric 1O2 ECL through facile yet effective surface engineering strategies on a screen-printed carbon electrode in aqueous media. Specifically, we complement a stepwise potential procedure with a pre-cathodic process to switch on the anodic 1O2 ECL and unravel how the in situ electrochemical pretreatments remarkably amplify the ECL intensity by modifying the surface oxygenates and promoting the 1O2-generating reactions. Additionally, ex situ oxygen plasma treatment on the electrode surface, which switches off the 1O2 ECL, further demonstrates the surface specificity of the 1O2 ECL from another perspective. Leveraging these surface strategies, we establish a sensing capability of the 1O2 ECL system with high sensitivity and selectivity toward tertiary amines. This work paves the way for translating a laboratory-scale 1O2-ECL system to portable and patternable sensing, imaging, and display applications.

Development of Graphene-Based Materials with the Targeted Action for Cancer Theranostics

The review summarises the prospects in the application of graphene and graphene-based nanomaterials (GBNs) in nanomedicine, including drug delivery, photothermal and photodynamic therapy, and theranostics in cancer treatment. The application of GBNs in various areas of science and medicine is due to the unique properties of graphene allowing the development of novel ground-breaking biomedical applications. The review describes current approaches to the production of new targeting graphene-based biomedical agents for the chemotherapy, photothermal therapy, and photodynamic therapy of tumors. Analysis of publications and FDA databases showed that despite numerous clinical studies of graphene-based materials conducted worldwide, there is a lack of information on the clinical trials on the use of graphene-based conjugates for the targeted drug delivery and diagnostics. The review will be helpful for researchers working in development of carbon nanostructures, material science, medicinal chemistry, and nanobiomedicine.

Purification of Spherical Graphite as Anode for Li-Ion Battery: A Comparative Study on the Purifying Approaches

Graphite is a versatile material used in various fields, particularly in the power source manufacturing industry. Nowadays, graphite holds a unique position in materials for anode electrodes in lithium-ion batteries. With a carbon content of over 99% being a requirement for graphite to serve as an electrode material, the graphite refinement process plays a pivotal role in the research and development of anode materials for lithium-ion batteries. This study used three different processes to purify spherical graphite through wet chemical methods. The spherical graphite after the purification processes was analysed for carbon content by using energy-dispersive X-ray (EDX) spectroscopy and was evaluated for structural and morphological characteristics through X-ray diffraction (XRD), scanning electron microscopy (SEM), and Brunauer-Emmett-Teller (BET) analyses. The analyses results indicate that the three-step process via H2SO4-NaOH-HCl cleaning can elevate the carbon content from 90% to above 99.9% while still maintaining the graphite structure and spherical morphology, thus enhancing the surface area of the material for anode application. Furthermore, the spherical graphite was studied for electrochemical properties when used as an anode for Li-ion batteries using cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) measurements. The results demonstrated that the purification process significantly improves the material's capacity with a specific capacity of 350 mAh/g compared to the 280 mAh/g capacity of the anode made of spherical graphite without purification.

Study of Morphology Control of Electro-Deposited Silver on Electro-Chemically Exfoliated Graphene Electrode and Its Conductivity

Solution-processed graphene is beneficial for large-scale, low-cost production. However, its small lateral size, variable layer thickness, and uncontrollable oxidation level still restrict its widespread electronic application. In this study, a newly developed electrochemical exfoliation process was introduced, and a graphene-patched film electrode was fabricated by interfacial self-assembly. We were able to minimize the deterioration of graphene colloids during exfoliation by voltage and electrolyte modulation, but the patched structure of the graphene electrode still showed low conductivity with numerous inter-sheet junctions. Therefore, we determined the optimal conditions for the growth of fully networked silver structures on the multi-stacked graphene film by direct current electro-deposition, and these silver-graphene composite films showed significantly lowered graphene-colloid-patched film surface resistance.

Effect of graphite oxide electrochemically exfoliated over a multimode interference filter

In this work, we study multimodal interference filters with a graphite oxide coating. Use of the multimodal interference filter shows a distinctive peak in the signal spectrum, and when using the exfoliated graphite coated multimodal interference filter, the signal shows different spectral changes, such as the full width at half maximum of the curve, the maximum power, and central wavelength, which indicates that graphite oxide absorbs part of the energy. In addition, microscope observations when a He-Ne laser is passed through the filter confirm that graphite oxide is adhered to the filter.

Continuous Production of Functionalized Graphene Inks by Soft Solution Processing

The continuous production of high-quality, few-layer graphene nanosheets (GNSs) functionalized with nitrogen-containing groups was achieved via a two-stage reaction method. The initial stage produces few-layer GNSs by utilizing our recently developed glycine-bisulfate ionic complex-assisted electrochemical exfoliation of graphite. The second stage, developed here, uses a radical initiator and nitrogen precursor (azobisisobutyronitrile) under microwave conditions in an aqueous solution for the efficient nitrogen functionalization of the initially formed GNSs. These nitrile radical reactions have great advantages in green chemistry and soft processing. Raman spectra confirm the insertion of nitrogen functional groups into nitrogen-functionalized graphene (N-FG), whose disorder is higher than that of GNSs. X-ray photoelectron spectra confirm the insertion of edge/surface nitrogen functional groups. The insertion of nitrogen functional groups is further confirmed by the enhanced dispersibility of N-FG in dimethyl formamide, ethylene glycol, acetonitrile, and water. Indeed, after the synthesis of N-FG in solution, it is possible to disperse N-FG in these liquid dispersants just by a simple washing-centrifugation separation-dispersion sequence. Therefore, without any drying, milling, and redispersion into liquid again, we can produce N-FG ink with only solution processing. Thus, the present work demonstrates the 'continuous solution processing' of N-FG inks without complicated post-processing conditions. Furthermore, the formation mechanism of N-FG is presented.

Green and Sustainable Ultrasound-Assisted Anodic Electrochemical Preparation of Graphene Oxide Dispersions and Their Antioxidant Properties

A fast method for preparing aqueous graphene oxide (GO) dispersions by electrochemical oxidation of a graphite anode without preliminary intercalation with oxidizing agents is proposed. Ultrasonic probing was used in the modulation mode of ultrasonic waves (work/rest) for more efficient graphite oxidation-exfoliation. It is shown that the 4/2 s mode of ultrasonic modulation is the most effective due to the probe material's low corrosion while maintaining the optimum synthesis temperature not exceeding 30-35 °C and achieving the best characteristics of the resulting product. Three cases of anodic oxidation of graphite to obtain graphene oxide were considered: (1) a combined cathode-anode compartment, (2) a split cathode-anode salt-bridged compartment, and (3) separated anode compartment with a 3.5 kDa dialysis membrane. It was determined that the approach to synthesis with a divided cathode-anode compartment makes it possible to obtain GO sheets with fewer defects compared to chemical methods or methods with a combined cathode-anode compartment and makes it possible to control the oxidation degree of the material (C:O ratio) by varying the current density. The prepared samples showed good stability for more than six months. The spectral and morphological characteristics were studied. Using chemiluminometry in the luminol/Co(II)/H₂O₂ system, the antioxidant properties concerning three key reactive oxygen species (H₂O₂, superoxide anion radical, and hydroxyl radical) were demonstrated. It was also shown that the prepared GO dispersions do not induce lipid and phospholipid peroxidation.

Assessment of Graphite, Graphene, and Hydrophilic-Treated Graphene Electrodes to Improve Power Generation and Wastewater Treatment in Microbial Fuel Cells

In this study, graphite, graphene, and hydrophilic-treated graphene electrodes were evaluated in a dual-chamber microbial fuel cell (DC-MFC). Free-oxygen conditions were promoted in anodic and cathodic chambers. Hydrochloric acid at 0.1 M and pH 1.1 was used as a catholyte, in addition to deionized water in the cathodic chamber. Domestic wastewater was used as a substrate, and a DuPontTM Nafion 117 membrane was used as a proton exchange membrane. The maximum power density of 32.07 mW·m-2 was obtained using hydrophilic-treated graphene electrodes and hydrochloric acid as catholyte. This power density was 1.4-fold and 32-fold greater than that of graphene (22.15 mW·m-2) and graphite (1.02 mW·m-2), respectively, under the same operational conditions. In addition, the maximum organic matter removal efficiencies of 69.8% and 75.5% were obtained using hydrophilic-treated graphene electrodes, for hydrochloric acid catholyte and deionized water, respectively. Therefore, the results suggest that the use of hydrophilic-treated graphene functioning as electrodes in DC-MFCs, and hydrochloric acid as a catholyte, favored power density when domestic wastewater is degraded. This opens up new possibilities for improving DC-MFC performance through the selection of suitable new electrode materials and catholytes.

Synthesis of N-Doped Few-Layer Graphene through Shock-Induced Carbon Fixation from CO2

In this study, graphene and N-doped graphene nanosheets were synthesized through the shock-induced reduction of CO2 using a cylindrical shock-loading apparatus. The mixture of solid CO2 and Mg powder was filled in the pre-cooled sample tube and then impacted by a shock-driven cylindrical flyer tube. The impact generated a shockwave that propagated into the mixed precursor, inducing a chemical reaction between CO2 and Mg at a high shock pressure and high shock temperature. The recovered black powders were characterized via various techniques, confirming the presences of few-layer graphene. The mechanism is carefully shown to be that CO2 was reduced by Mg to form few-layer graphene under shock-induced high pressure and high temperature. By adding carbamide as an N source, this synthetic route was also applied to synthesize N-doped graphene nanosheets. Moreover, the yield and mass of the graphene materials in this study are up to 40% and 0.5 g, respectively. This study showed an efficient and easy-to-scale-up route to prepare few-layer graphene and N-doped few-layer graphene through shock synthesis.

Microbial-Inspired Surface Patterning for Selective Bacterial Actions for Enhanced Performance in Microbial Fuel Cells

The performance of any bio-electrochemical system is dependent on the efficiency of electrode-microbial interactions. Surface properties play a focal role in bacterial attachment and biofilm formation on the electrodes. In addition to electrode surface properties, selective bacterial adhesion onto the electrode surface is mandatory to mitigate energy loss due to undesired bacterial interactions on the electrode surface. In the present study, microbial-patterned graphite scaffolds are developed for selective bacterial-electrode interactions. A power density as high as 1105 mW/m² is achieved with mG-E (a graphite electrode patterned with Escherichia coli), which is about 3 times higher than that of the pristine graphite electrode (370 mW/m²). Initial mechanical pre-treatment of the graphite electrode, followed by bacterial patterning, results in the formation of a unique cobblestone topography with a tuned surface area of 127.12 m²/g. This provides suitable morphology with enhanced active sites for selective bacterial intercalation in graphite layers. This cannot be otherwise achieved by any mechanical or other means. A unique methodology of symbolic regression is adopted to validate a genetic algorithm suitable for predicting a perfect correlation between surface characteristics and electrochemical characteristics with a minimum root-mean-square error of 0.08. The bacterial intercalation onto the graphite electrode causes protuberance of the graphite layers that reduces the surface potential and resistance, leading to high electron transfer. The study presents a unique bacterial-inspired surface patterning on the anode, which is critical for the performance of a microbial fuel cell.

Surface Modification of 2D Photocatalysts for Solar Energy Conversion

2D materials show many particular properties, such as high surface-to-volume ratio, high anisotropic degree, and adjustable chemical functionality. These unique properties in 2D materials have sparked immense interest due to their applications in photocatalytic systems, resulting in significantly enhanced light capture, charge-transfer kinetics, and surface reaction. Herein, the research progress in 2D photocatalysts based on varied compositions and functions, followed by specific surface modification strategies, is introduced. Fundamental principles focusing on light harvesting, charge separation, and molecular adsorption/activation in the 2D-material-based photocatalytic system are systemically explored. The examples described here detail the use of 2D materials in various photocatalytic energy-conversion systems, including water splitting, carbon dioxide reduction, nitrogen fixation, hydrogen peroxide production, and organic synthesis. Finally, by elaborating the challenges and possible solutions for developing these 2D materials, the review is expected to provide some inspiration for the future research of 2D materials used on efficient photocatalytic energy conversions.

Synthesis and Photoluminescence Properties of MoS2/Graphene Heterostructure by Liquid-Phase Exfoliation

Here, we report the synthesis of MoS2/graphene heterostructure in single-stage, liquid-phase exfoliation using a 7:3 isopropyl alcohol/water mixture. Further, the synthesized heterostructure was characterized using UV-visible and micro-Raman spectroscopies, transmission electron microscopy (TEM), and dynamic light scattering (DLS) analysis. UV-visible and micro-Raman analyses confirmed that the synthesized heterostructure had mostly few-layered (two-to-four sheets) MoS2. The photophysical properties of the heterostructure were analyzed using steady-state and time-resolved luminescence techniques. Enhanced photoluminescence was observed in the case of the heterostructure probably due to an increase in the defect sites or reduction in the rate of nonradiative decay upon formation of the sandwiched heterostructure. Applications of this heterostructure for fluorescence live-cell imaging were carried out, and the heterostructure demonstrated a better luminescence contrast compared to its individual counterpart MoS2 in phosphate-buffered saline (PBS).

Application of reduced graphene oxide as the hole transport layer in organic solar cells synthesized from waste dry cells using the electrochemical exfoliation method

The hole transport layer (HTL) plays an important role in improving the efficiency and stability of organic solar cells (OSCs).

Graphene's Role in Emerging Trends of Capacitive Energy Storage

Technological breakthroughs in energy storage are being driven by the development of next-generation supercapacitors with favorable features besides high-power density and cycling stability. In this innovation, graphene and its derived materials play an active role. Here, the research status of graphene supercapacitors is analyzed. Recent progress is outlined in graphene assembly, exfoliation, and processing techniques. In addition, electrochemical and electrical attributes that are increasingly valued in next-generation supercapacitors are highlighted along with a summary of the latest research addressing chemical modification of graphene and its derivatives for future supercapacitors. The challenges and solutions discussed in the review hopefully will shed light on the commercialization of graphene and a broader genre of 2D materials in energy storage applications.

Drift Suppression of Solution-Gated Graphene Field-Effect Transistors by Cation Doping for Sensing Platforms

Solution-gated graphene field-effect transistors (SG-GFETs) provide an ideal platform for sensing biomolecules owing to their high electron/hole mobilities and 2D nature. However, the transfer curve often drifts in an electrolyte solution during measurements, making it difficult to accurately estimate the analyte concentration. One possible reason for this drift is that p-doping of GFETs is gradually countered by cations in the solution, because the cations can permeate into the polymer residue and/or between graphene and SiO₂ substrates. Therefore, we propose doping sufficient cations to counter p-doping of GFETs prior to the measurements. For the pre-treatment, GFETs were immersed in a 15 mM sodium chloride aqueous solution for 25 h. The pretreated GFETs showed that the charge neutrality point (CNP) drifted by less than 3 mV during 1 h of measurement in a phosphate buffer, while the non-treated GFETs showed that the CNP was severely drifted by approximately 50 mV, demonstrating a 96% reduction of the drift by the pre-treatment. X-ray photoelectron spectroscopy analysis revealed the accumulation of sodium ions in the GFETs through pre-treatment. Our method is useful for suppressing drift, thus allowing accurate estimation of the target analyte concentration.

Novel application of electrochemical bipolar exfoliated graphene for highly sensitive disposable label-free cancer biomarker aptasensors

Label-free aptasensors can be a promising point-of-care biosensor for detecting various cancer diseases due to their selectivity, sensitivity, and lower cost of production and operation. In this study, a highly sensitive aptasensor based on gold-covered polyethylene terephthalate electrodes (PET/Au) decorated with bipolar exfoliated graphene is proposed as a possible contender for disposable label-free aptasensor applications. Bipolar electrochemical exfoliation enables simultaneous exfoliation, reduction, and deposition of graphene nanosheets on prospective electrodes. Our comparative study confirms that the bipolar exfoliated graphene deposited on the negative feeding electrode (i.e., reduced graphene oxide) possesses better electrochemical properties for aptasensing. The optimized aptasensor based on bipolar exfoliated graphene deposited on PET/Au electrodes exhibits a highly sensitive response of 4.07 μA log c -1 (unit of c, pM) which is linear in the range of 0.0007-20 nM, and has a low limit of detection of 0.65 pM (S/N = 3). The aptasensor establishes highly selective performance with a stability of 91.2% after 6 days. This study demonstrates that bipolar electrochemistry is a simple yet efficient technique that could provide high-quality graphene for biosensing applications. Considering its simplicity and efficiency, the BPE technique promises the development of feasible and affordable lab-on-chip and point-of-care cancer diagnosis technologies.

Graphene preparation and graphite exfoliation

The synthesis of Graphene is critical to achieving its functions in practical applications. Different methods have been used to synthesis graphene, but graphite exfoliation is considered the simplest way to produce graphene and graphene oxide. In general, controlling the synthesis conditions to achieving the optimum yield, keeping the pristine structure to realize on-demand properties, minimum layers with the smallest lateral size, and minimum oxygen content are the most obstacles experienced by researchers. Each application requires a specific graphene model, graphene oxides GO, or even graphene intercalated compounds (GIC) depending on synthesis conditions and approach. This paper reviewed and summarized the most researches in this field and focusing on exfoliation methods.

Cavitation-assisted decontamination of yttria from graphite of different densities

Yttria coated graphite crucibles are widely used to handle molten refractory and radioactive metals like uranium and plutonium. However, the coated layer suffers damages like cracking and peeling off owing to thermal cycles. As a result, removal of the yttria layer from the graphite surface is essential to ensure reuse of the crucible and minimization of radioactive waste. The present work investigates intensified dissolution of yttria from the coated graphite samples using ultrasound as a non-destructive decontamination technique to recycle the graphite substrate. The optimum conditions established for maximum dissolution were 8 M as acid strength, frequency of 30 kHz, temperature of 45 °C and power density of 8 W cm^-2 that resulted in maximum dissolution of 52% in 30 min. Use of an oxidant H₂O₂ to the acid, did not yield any improvement in the dissolution kinetics, instead, increased oxidation of the graphite substrate was observed, leading to the anomalous weight gain of the graphite substrate despite surface erosion. Effect of ultrasound on the dissolution was pronounced, with almost a threefold increase compared to dissolution performed under silent conditions. Rates of dissolution of yttria from the substrate of different densities and pore size distribution were also studied. The dissolution was slowest from graphite of density 1.82 g cm^-3 as the pore size distribution was conducive to accommodate the yttria particles. The dissolution in nitric acid followed ash layer diffusion controlled kinetics. The study has demonstrated the efficacy of application of ultrasound for accelerated decontamination of graphite substrates.

Paper Thermoelectrics by a Solvent-Free Drawing Method of All Carbon-Based Materials

As practical interest in the flexible or wearable thermoelectric generators (TEGs) has increased, the demand for the high-performance TEGs based on ecofriendly, mechanically resilient, and economically viable TEGs as alternatives to the brittle inorganic materials is growing. Organic or hybrid thermoelectric (TE) materials have been employed in flexible TEGs; however, their fabrication is normally carried out using wet processing such as spin-coating or screen printing. These techniques require materials dissolved or dispersed in solvents; thus, they limit the substrate choice. Herein, we have rationally designed solvent-free, all carbon-based TEGs dry-drawn on a regular office paper using few-layered graphene (FLG). This technique showed very good TE parameters, yielding a power factor of 97 μW m-1 K-2 at low temperatures. The p-type only device exhibited an output power of up to ∼19.48 nW. As a proof of concept, all carbon-based p-n TEGs were created on paper with the addition of HB pencil traces. The HB pencil exhibited low Seebeck coefficients (-7 μV K-1), and the traces were highly resistive compared to FLG traces, which resulted in significantly lower output power compared to the p-type only TEG. The demonstration of all carbon-based TEGs drawn on paper highlights the potential for future low-cost, flexible, and almost instantaneously created TEGs for low-power applications.

Controllable design of defect-rich hybrid iron oxide nanostructures on mesoporous carbon-based scaffold for pseudocapacitive applications

The controllable design of functional nanostructures for energy and environmental applications represents a critical yet challenging technology. The existing fabrication strategies focus mainly on increasing the number of accessible active sites. However, these techniques generally necessitate complex chemical agents and suffer from limited experimental conditions delivering high costs, low yields, and poor reproducibility. The present work reports a new strategy for controllable synthesis of a hybrid system including mixed iron oxide nanostructures enriched with non-stoichiometric Fe21.34O32 and Fe3+[Fe5/33+□1/32+]O4 phases, which possess a high concentration of oxygen and Fe2+ vacancies, and a mesoporous carbon-based scaffold (MCS), which was dervied from coffee residues, with graphitic surface and perforated architecture. The nanoperforates acted as trapping sites to localise the FexOy nanoparticles, thereby boosting the density of accessible active sites. Additionally, at the interfacial regions between the FexOy crystallites, a high density of oxygen vacancies with an oriented pattern was shown to create superlattice structures. The energy storage functionality of the defect-rich MCS/FexOy nanostructure with nanoperforated architecture was investigated, where the results exhibited a high gravimetric capacitance of 540 F g-1 at a current density of 1 A g-1 with outstanding capacitance retention of 73.6% after 14 000 cycles.

Characterization of Polyvinylidene Fluoride (PVDF) Electrospun Fibers Doped by Carbon Flakes

Polyvinylidene fluoride (PVDF) is a modern polymer material used in a wide variety of ways. Thanks to its excellent resistance to chemical or thermal degradation and low reactivity, it finds use in biology, chemistry, and electronics as well. By enriching the polymer with an easily accessible and cheap variant of graphite, it is possible to affect the ratio of crystalline phases. A correlation between the ratios of crystalline phases and different properties, like dielectric constant as well as piezo- and triboelectric properties, has been found, but the relationship between them is highly complex. These changes have been observed by a number of methods from structural, chemical and electrical points of view. Results of these methods have been documented to create a basis for further research and experimentation on the usability of this combined material in more complex structures and devices.

Facile synthesis of graphene oxide from graphite rods of recycled batteries by solution plasma exfoliation for removing Pb from water

We herein present a simple, fast, efficient and environmentally friendly technique to prepare graphene oxide (GO) from graphite rods of recycled batteries by using solution plasma exfoliated techniques at atmospheric pressure. The prepared GO with an average 3 nm-thickness and 1.5 μm-length, having large surface area and high porosity, has been used to remove Pb(ii) ions from the water. The obtained results indicated that the adsorption of Pb(ii) onto GO depends on pH, contact time, temperature and initial concentration of Pb(ii). The maximum adsorption capacity of Pb(ii) onto GO determined from the Langmuir model (with a high R² value of 0.9913) was 180.1 mg g⁻¹ at room temperature. A removal efficiency of ∼96.6% was obtained after 40 min. Calculations of thermodynamic parameters (ΔG°, ΔH° và ΔS°) show the adsorption of Pb(ii) ions on the GO surface is spontaneous and intrinsically heat-absorbing. The potential mechanism can be suggested here to be the interaction of the π–π* bonding electrons and Pb(ii) as well as the electrostatic attraction between Pb(ii) and the oxygen-containing functional groups on GO.

Facile synthesis of graphene oxide from graphite rods of recycled batteries by solution plasma exfoliation for removing Pb from water.

Fully inkjet-printed multilayered graphene-based flexible electrodes for repeatable electrochemical response

Graphene has proven to be useful in biosensing applications. However, one of the main hurdles with printed graphene-based electrodes is achieving repeatable electrochemical performance from one printed electrode to another. We have developed a consistent fabrication process to control the sheet resistance of inkjet-printed graphene electrodes, thereby accomplishing repeatable electrochemical performance. Herein, we investigated the electrochemical properties of multilayered graphene (MLG) electrodes fully inkjet-printed (IJP) on flexible Kapton substrates. The electrodes were fabricated by inkjet printing three materials – (1) a conductive silver ink for electrical contact, (2) an insulating dielectric ink, and (3) MLG ink as the sensing material. The selected materials and fabrication methods provided great control over the ink rheology and material deposition, which enabled stable and repeatable electrochemical response: bending tests revealed the electrochemical behavior of these sensors remained consistent over 1000 bend cycles. Due to the abundance of structural defects (e.g., edge defects) present in the exfoliated graphene platelets, cyclic voltammetry (CV) of the graphene electrodes showed good electron transfer (k = 1.125 × 10⁻² cm s⁻¹) with a detection limit (0.01 mM) for the ferric/ferrocyanide redox couple, [Fe(CN)₆]^−3/−4, which is comparable or superior to modified graphene or graphene oxide-based sensors. Additionally, the potentiometric response of the electrodes displayed good sensitivity over the pH range of 4–10. Moreover, a fully IJP three-electrode device (MLG, platinum, and Ag/AgCl) also showed quasi-reversibility compared to a single IJP MLG electrode device. These findings demonstrate significant promise for scalable fabrication of a flexible, low cost, and fully-IJP wearable sensor system needed for space, military, and commercial biosensing applications.

A fully inkjet printed and flexible multilayer graphene based three electrode device showed electrochemical reversibility.

Graphene to Advanced MoS2: A Review of Structure, Synthesis, and Optoelectronic Device Application

In contrast to zero-dimensional (0D), one-dimensional (1D), and even their bulk equivalents, in two-dimensional (2D) layered materials, charge carriers are confined across thickness and are empowered to move across the planes. The features of 2D structures, such as quantum confinement, high absorption coefficient, high surface-to-volume ratio, and tunable bandgap, make them an encouraging contestant in various fields such as electronics, energy storage, catalysis, etc. In this review, we provide a gentle introduction to the 2D family, then a brief description of transition metal dichalcogenides (TMDCs), mainly focusing on MoS2, followed by the crystal structure and synthesis of MoS2, and finally wet chemistry methods. Later on, applications of MoS2 in dye-sensitized, organic, and perovskite solar cells are discussed. MoS2 has impressive optoelectronic properties; due to the fact of its tunable work function, it can be used as a transport layer, buffer layer, and as an absorber layer in heterojunction solar cells. A power conversion efficiency (PCE) of 8.40% as an absorber and 13.3% as carrier transfer layer have been reported for MoS2-based organic and perovskite solar cells, respectively. Moreover, MoS2 is a potential replacement for the platinum counter electrode in dye-sensitized solar cells with a PCE of 7.50%. This review also highlights the incorporation of MoS2 in silicon-based heterostructures where graphene/MoS2/n-Si-based heterojunction solar cell devices exhibit a PCE of 11.1%.

Processable dispersions of photocatalytically active nanosheets derived from titanium diboride: self assembly into hydrogels and paper-like macrostructures

Titanium diboride (TiB₂), a layered ceramic material, is well-known for its ultrahigh strength, wear resistance, and chemical inertness. In this work, we present a simple one-pot chemical approach that yields sheet-like nanostructures from TiB₂. We serendipitously found that TiB₂ crystals can undergo complete dissolution in a mild aqueous solution of H₂O₂ under ambient conditions. This unexpected dissolution of TiB₂ is followed by non-classical recrystallization that results in nanostructures with sheet-like morphology exhibiting Ti-O and B-O functional groups. We show that this pathway can be used to obtain an aqueous dispersion of nanosheets with concentrations ≥3 mg mL^-1. Interestingly, these nanosheets tend to transform into a hydrogel without the need of any additives. We found that the degree of gelation depends on the ratio of TiB₂ to H₂O₂, which can be tuned to achieve gels with a shear modulus of 0.35 kPa. We also show this aqueous dispersion of nanosheets is processable and forms hierarchical paper-like macrostructures upon vacuum filtration. Such an ability to assemble into free-standing 3D structures would enable a leap to practical applications. We also show that the high surface area and presence of oxy-functional groups on these nanosheets endow them a superior photocatalytic activity to degrade organic pollutants. This exemplifies the rich potential that TiB₂ offers upon nanoscaling. The results presented here not only add a novel material to the 2D flatland but also urge the scientific community to revisit the chemistry of metal borides, that have been traditionally considered as relatively inert ceramics.

Synergistic Effect of Expanded Graphite-Silane Functionalized Silica as a Hybrid Additive in Improving the Thermal Conductivity of Cementitious Grouts with Controllable Water Uptake

Recently, a growing demand for geothermal applications has led to the exploitation of energy efficiently by developing grouting materials in the borehole between pipes and the ground. Therefore, the current study developed newly formulated cementitious grouts by the integration of expanded graphite (EG)-based hybrid additives synthesized by building chemical bridges between silica particles and EG in the presence of amino functional silane coupling agents. These produced hybrid additives with controlled EG and silica ratios were utilized in grout mixtures used in borehole heat exchangers to enhance the thermal conductivity. According to the optimization study on the formulation development of grout mixtures with bentonite, silica sands, cement, and superplasticizer by adding neat EG and EG-based hybrids, the relationship between the carbon amount and water demand was found to have a significant impact on thermal conductivity. The highest thermal conductivity value of 2.656 W/mK was achieved by the incorporation of 5 wt% hybrid additive with the ratio silica/EG of 1:5 compared to the reference grout, which showed a thermal conductivity of 2.373 W/mK. Therefore, the enhancement in thermal conductivity was dependent on the increase in the EG content and also the additive loading ratio, resulting in a slight increase in the water demand.

Lightweight and Bulk Organic Thermoelectric Generators Employing Novel P-Type Few-Layered Graphene Nanoflakes

Graphene exhibits both high electrical conductivity and large elastic modulus, which makes it an ideal material candidate for many electronic devices. At present not much work has been conducted on using graphene to construct thermoelectric devices, particularly due to its high thermal conductivity and lack of bulk fabrication. Films of graphene-based materials, however, and their nanocomposites have been shown to be promising candidates for thermoelectric energy generation. Exploring methods to enhance the thermoelectric performance of graphene and produce bulk samples can significantly widen its application in thermoelectrics. Realization of bulk organic materials in the thermoelectric community is highly desired to develop cheap, Earth-abundant, light, and nontoxic thermoelectric generators. In this context, this work reports a new approach using pressed pellets bars of few-layered graphene (FLG) nanoflakes employed in thermoelectric generators (TEGs). First, FLG nanoflakes were produced by a novel dry physical grinding technique followed by graphene nanoflake liberation using plasma treatment. The resultant material is highly pure with very low defects, possessing 3 to 5-layer stacks as proved by Raman spectroscopy, X-ray diffraction measurement, and scanning electron microscopy. The thermal and electronic properties confirm the anisotropy of the material and hence the varied performance characteristics parallel to and perpendicular to the pressing direction of the pellets. The full thermoelectric properties were characterized both parallel and perpendicular to the pressing direction, and the proof-of-concept thermoelectric generators were fabricated with variable amounts of legs.

Nitrogen-Doped Graphene via In-situ Alternating Voltage Electrochemical Exfoliation for Supercapacitor Application

Doping heteroatom, an effective way to enhance the electrochemical performances of graphene, has received wide attention, especially related to nitrogen. Alternating voltage electrochemical exfoliation, as a low cost and green electrochemical approach, has been developed to construct in-situ N-doped graphene (N-Gh) material. The N-Gh presents a much higher capacity than that of pure graphene prepared via the same method, which might be attributed to the introduction of nitrogen, which has much more effects and a disordered structure. As-prepared N-Gh exhibits a low O/C ratio that is helpful in maintaining high electrical conductivity. And the effects and disorder structure are also conductive to reduce the overlaps of graphene layers. A symmetric supercapacitor assembled with N-Gh electrodes displays a satisfactory rate behavior and long cycling stability (92.3% retention after 5,000 cycles).

Raman Fingerprints of Graphene Produced by Anodic Electrochemical Exfoliation

Electrochemical exfoliation is one of the most promising methods for scalable production of graphene. However, limited understanding of its Raman spectrum as well as lack of measurement standards for graphene strongly limit its industrial applications. In this work, we show a systematic study of the Raman spectrum of electrochemically exfoliated graphene, produced using different electrolytes and types of solvents in varying amounts. We demonstrate that no information on the thickness can be extracted from the shape of the 2D peak as this type of graphene is defective. Furthermore, the number of defects and the uniformity of the samples strongly depend on the experimental conditions, including postprocessing. Under specific conditions, the formation of short conductive trans-polyacetylene chains has been observed. Our Raman analysis provides guidance for the community on how to get information on defects coming from electrolyte, temperature, and other experimental conditions, by making Raman spectroscopy a powerful metrology tool.

Multifunctional Effects of Sulfonyl-Anchored, Dual-Doped Multilayered Graphene for High Areal Capacity Lithium Sulfur Batteries

Li-S batteries (LSBs) require a minimum 6 mAh cm^-2 areal capacity to compete with the state-of-the-art lithium ion batteries (LIBs). However, this areal capacity is difficult to achieve due to a major technical issue-the shuttle effect. Nonpolar carbon materials limit the shuttle effect through physical confinement. However, the polar polysulfides (PSs) only provide weak intermolecular interactions (0.1-0.7 eV) with these nonpolar carbon materials. The physically encapsulated PSs inside the nonpolar carbon scaffold eventually diffuses out and starts shuttling. Chemically interactive hosts are more effective at interacting with the PSs due to high binding energies. Herein, a multifunctional separator coating of nitrogen-doped multilayer graphene (NGN) and -SO₃ ^- containing Nafion (N-NGN) is used to mitigate PS shuttling and to produce a high areal capacity LSB. The Nafion is used as a binder instead of PVDF to provide an additional advantage of -SO₃ ^- to chemically bind the PS. The motive of this research is to investigate the effect of highly electronegative N and -SO₃ ^- (N-NGN) in comparison with the -OH, -COOH, and -SO₃ ^- groups from a hydroxyl graphene and Nafion composite (N-OHGN) to mitigate PS shuttling in LSBs. The highly conductive doped graphene architecture (N-NGN) provides efficient pathways for both electrons and ions, which accelerates the electrochemical conversion at high sulfur loading. Moreover, the electron-rich pyridine N and -SO₃ ^- show strong chemical affinity with the PS through polar-polar interactions, which is proven by the superior electrochemical performance and density functional theory calculations. Further, the N-NGN (5 h) produces a maximum areal capacity of 12.0 and 11.0 mAh cm^-2, respectively, at 15 and 12 mg cm^-2 sulfur loading. This areal capacity limit is significantly higher than the required areal capacity of LSBs for commercial application, which shows the significant strength of N-NGN as an excellent separator coating for LSBs.

Electro-Exfoliation of Graphite to Graphene in an Aqueous Solution of Inorganic Salt and the Stabilization of Its Sponge Structure with Poly(Furfuryl Alcohol)

We demonstrate an accessible and effective technique for exfoliating graphite foil and graphite powder into graphene in a water solution of inorganic salt. In our research, we report an electrochemical cathodic exfoliation in an aqueous solution of Na₂SO₄. After electro-exfoliation, the resulting graphene was premixed with furfuryl alcohol (FA) and an inorganic template (CaCO₃ and Na₂CO₃). Once FA was polymerized to poly(furfuryl alcohol) (PFA), the mixture was carbonized. Carbon bridges originating in thermally-decomposed PFA joined exfoliated graphene flakes and stabilized the whole sponge-type structure after the nano-template was removed. Gases evolved at the graphite electrode (cathode) played an important role in the process of graphene-flake splitting and accelerated the change of graphite into graphene flakes. Starting graphite materials and graphene sponges were characterized using Raman spectroscopy, SEM, high-resolution transmission electron microscopy (HRTEM), elemental analysis, and low-temperature adsorption of nitrogen to determine their structure, morphology, and chemical composition. The discovered manufacturing protocol had a positive influence on the specific surface area and porosity of the sponges. The SEM and HRTEM studies confirmed a high separation degree of graphite and different agglomeration pathways. Raman spectra were analyzed with particular focus on the intensities of I_D and I_G peaks; the graphene-type nature of the sponges was confirmed.

Carbon Nanotube-Supported MoSe2 Holey Flake:Mo2C Ball Hybrids for Bifunctional pH-Universal Water Splitting

The design of cost-effective and efficient electrocatalysts for both hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) is pivotal for the molecular hydrogen (H₂) production from electrochemical water splitting as a future energy source. Herein, we show that the hybridization between multiple HER- and OER-active components is effective for the design and realization of bifunctional electrocatalysts for universal water splitting, i.e., in both acidic and alkaline media. Our strategy relies on the production and characterization of MoSe₂ holey flake:Mo₂C ball hybrids supported by single-walled carbon nanotube (SWCNT) electrocatalysts. Flakes of MoSe₂ are produced through hydrogen peroxide (H₂O₂)-aided liquid phase exfoliation (LPE), which promotes both the exfoliation of the materials and the formation of nanopores in the flakes via chemical etching. The amount of H₂O₂ in the solvent used for the exfoliation process is optimized to obtain ideal high ratio between edge and basal sites ratio, i.e., high-number of electrocatalytic sites. The hybridization of MoSe₂ flakes with commercial ball-like shaped Mo₂C crystals facilitates the Volmer reaction, which works in both acidic and alkaline media. In addition, the electrochemical coupling between SWCNTs (as support) and MoSe₂:Mo₂C hybrids synergistically enhances both HER- and OER-activity of the native components, reaching high η₁₀ in acidic and alkaline media (0.049 and 0.089 V for HER in 0.5 M H₂SO₄ and 1 M KOH, respectively; 0.197 and 0.241 V for OER in 0.5 M H₂SO₄ and 1 M KOH, respectively). The exploitation of the synergistic effects occurring between multicomponent electrocatalysts, coupled with the production of the electrocatalysts themselves through scalable and cost-effective solution-processed manufacturing techniques, is promising to scale-up the production of H₂ via efficient water splitting for the future energy portfolio.

Preparation of Few-Layer Graphene by Pulsed Discharge in Graphite Micro-Flake Suspension

Few-layer graphene nanosheets were produced by pulsed discharge in graphite micro-flake suspension at room temperature. In this study, the discharging current and voltage data were recorded for the analysis of the pulsed discharge processes. The as-prepared samples were recovered and characterized by various techniques, such as TEM, SEM, Raman, XRD, XPS, FT-IR, etc. The presence of few-layer graphene (3–9 L) in micrometer scale was confirmed. In addition, it is investigated that the size of recovered graphene nanosheets are influenced by the initial size of utilized graphite micro-flake powder. Based on the process of pulsed discharge and our experimental results, the formation mechanism of few-layer graphene was discussed. The influence of charging voltage on as-prepared samples is also investigated.

Electrochemical synthesis of multicolor fluorescent N-doped graphene quantum dots as a ferric ion sensor and their application in bioimaging

A novel electrochemical strategy for simple and facile synthesis of semicarbazide functionalized nitrogen-doped graphene quantum dots (N-GQDs) was reported, based on direct exfoliation and oxidation from graphite rods.

High-Throughput Production of Heterogeneous RuO2/Graphene Catalyst in a Hydrodynamic Reactor for Selective Alcohol Oxidation

We report on the high-throughput production of heterogeneous catalysts of RuO2-deposited graphene using a hydrodynamic process for selective alcohol oxidation. The fluid mechanics of a hydrodynamic process based on a Taylor–Couette flow provide a high shear stress field and fast mixing process. The unique fluidic behavior efficiently exfoliates graphite into defect-free graphene sheets dispersed in water solution, in which ionic liquid is used as the stabilizing reagent to prevent the restacking of the graphene sheets. The deposition of RuO2 on a graphene surface is performed using a hydrodynamic process, resulting in the uniform coating of RuO2 nanoparticles. The as synthesized RuO2/IL–graphene catalyst has been applied efficiently for the oxidation of a wide variety of alcohol substrates, including biomass-derived 5-hydroxymethylfurfural (HMF) under environmentally benign conditions. The catalyst is mechanically stable and recyclable, confirming its heterogeneous nature.

Simple Synthesis of Large Graphene Oxide Sheets via Electrochemical Method Coupled with Oxidation Process

In this paper, we report a simple two-step approach for the synthesis of large graphene oxide (GO) sheets with lateral dimensions of ≈10 μm or greater. The first step is a pretreatment step involving electrochemical exfoliation of graphite electrode to produce graphene in a mixture of H₂SO₄ and H₃PO₄. The second step is the oxidation step, where oxidation of exfoliated graphene sheets was performed using KMnO₄ as the oxidizing agent. The oxidation was carried out for different times ranging from 1 to 12 h at ∼60 °C. Prepared GO batches were characterized using a number of spectroscopy and microscopy techniques such as X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy (FTIR), and UV-visible spectroscopy. Raman and thermogravimetric analysis techniques were used to study the degree of oxidation in the as-synthesized GO batches. The UV-visible absorption spectrum showed an intense peak at 230 nm and an adjacent band at 300 nm corresponding to π-π* and n-π* transitions in all samples. Normalized FTIR plots were used to calculate the relative percentages of oxygen-containing functional groups, which were found to be maximum in GO (6 h). Boehm titration was used to quantify the functional groups present on the GO surface. Overall GO sheets obtained after 6 h of oxidation, GO (6 h), were found to be the best. XRD pattern of GO (6 h) revealed a characteristic peak at 2θ = 8.88°, with the corresponding interplanar spacing between the layers being 0.995 nm, which is among the best with respect to the previous methods reported in the literature. Raman spectroscopy showed that the degree of defect (I _D/I _G) area ratio for GO (6 h) was 1.24, which is higher than that obtained for GO (1.18) prepared by widely used Marcano's approach.

Highly Dispersive MoP Nanoparticles Anchored on Reduced Graphene Oxide Nanosheets for an Efficient Hydrogen Evolution Reaction Electrocatalyst

Electrochemical water-splitting with non-noble metal catalysts provides an eco-friendly strategy for renewable production of hydrogen. In this study, the MoP@C@reduced graphene oxide (rGO) composite was prepared via mild reactions through a chemical bath and postannealing process. With the assistance of citric acid, the MoP@C@rGO composite containing ultrafine MoP nanoparticles with a size of 3 nm anchored on two-dimensional C/rGO nanosheets has been obtained. The chelation effect with citric acid and the merits of rGO not only lead to affordable active sites but also improved the electrical conductivity and stability at the same time. Serving as the hydrogen evolution reaction (HER) electrocatalyst, the MoP@C@rGO composite presents a small overpotential of 168.9 mV at 10 mA cm^-2. It has superior durability when compared to samples of pure MoP, MoP@C, and MoP@rGO. The relative high activity and stable performance as well as the simple preparation process make the MoP@C@rGO composite a promising HER electrocatalyst.

Electrical Transport and Power Dissipation in Aerosol-Jet-Printed Graphene Interconnects

This paper reports the first known investigation of power dissipation and electrical breakdown in aerosol-jet-printed (AJP) graphene interconnects. The electrical performance of aerosol-jet printed (AJP) graphene was characterized using the Transmission Line Method (TLM). The electrical resistance decreased with increasing printing pass number (n); the lowest sheet resistance measured was 1.5 kΩ/sq. for n = 50. The role of thermal resistance (RTH) in power dissipation was studied using a combination of electrical breakdown thermometry and infrared (IR) imaging. A simple lumped thermal model ([Formula: see text]) and COMSOL Multiphysics was used to extract the total RTH, including interfaces. The RTH of AJP graphene on Kapton is ~27 times greater than that of AJP graphene on Al2O3 with a corresponding breakdown current density 10 times less on Kapton versus Al2O3.

Ultra sensitive detection of Cd (II) using reduced graphene oxide/carboxymethyl cellulose/glutathione modified electrode

The present work describes the electrochemical detection of Cd²⁺ using reduced graphene oxide (rGO), carboxymethyl cellulose (CMC) and glutathione (GSH) modified glassy carbon electrode (GCE) by Square Wave Anodic Stripping Voltammetry (SWASV). The prepared nanocomposite was characterized by X-ray diffraction (XRD), RAMAN, Scanning Electron Microscopy (SEM), Fourier Transform Infrared (FTIR) and X-ray photoelectron spectroscopy (XPS), Cyclic Voltammetry (CV) and Electrochemical Impedance Spectroscopy (EIS). The influence of experimental parameters such as effect of pH, choice of supporting electrolyte, deposition time and deposition potential, were optimized. Under the optimized conditions, the linear relationship between the current intensity and Cd²⁺ concentration (2-20 nM) was I (μA) = -6.78 (c/nM) + 4.547 (R² = 0.996). The detection limit and sensitivity achieved for the modified electrode were 0.05 nM and 4.5 μA/nM respectively. Finally, rGO/CMC/GSH/GCE was successfully demonstrated for the detection of Cd²⁺ in real samples, and the results were compared with AAS analysis.

Eco-friendly preparation of large-sized graphene via short-circuit discharge of lithium primary battery

We proposed a large-sized graphene preparation method by short-circuit discharge of the lithium-graphite primary battery for the first time. LiC_x is obtained through lithium ions intercalation into graphite cathode in the above primary battery. Graphene was acquired by chemical reaction between LiC_x and stripper agents with dispersion under sonication conditions. The gained graphene is characterized by Raman spectrum, X-ray diffraction (XRD), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), Atomic force microscope (AFM) and Scanning electron microscopy (SEM). The results indicate that the as-prepared graphene has a large size and few defects, and it is monolayer or less than three layers. The quality of graphene is significant improved compared to the reported electrochemical methods. The yield of graphene can reach 8.76% when the ratio of the H₂O and NMP is 3:7. This method provides a potential solution for the recycling of waste lithium ion batteries.

Exfoliation of layered materials using electrochemistry

There is a tremendous interest towards 2D layered materials. Electrochemically-assisted exfoliation of bulk crystals represents one of the most promising methods of large production of graphene and other 2D material sheets.

Synthesis of irregular graphene oxide tubes using green chemistry and their potential use as reinforcement materials for biomedical applications

Micrometer length tubes of graphene oxide (GO) with irregular form were synthesised following facile and green metal complexation reactions. These materials were obtained by crosslinking of GO with calcium, zinc or strontium chlorides at three different temperatures (24, 34 and 55°C) using distilled water as solvent for the compounds and following a remarkably simple and low-cost synthetic method, which employs no hazardous substances and is conducted without consumption of thermal or sonic energy. These irregular continuous GO networks showed a very particular interconnected structure by Field Emission Scanning Electron Microscopy with Energy-Disperse X-Ray Spectroscopy for elemental analysis and High-resolution Transmission Electron Microscopy with Scanning Transmission Electron Microscope Dark Field Imaging, and were analysed by Raman Spectroscopy. To demonstrate the potential use of these 3D GO networks as reinforcement materials for biomedical applications, two composites of calcium alginate with irregular tubes of GO and with single GO nanosheets were prepared with the same amount of GO and divalent atoms and analysed. Thus, the dynamic-mechanical modulus of the composites synthesised with the 3D crosslinked GO networks showed a very significant mechanical improvement due to marked microstructural changes confirmed by confocal microscopy, differential scanning calorimetry and Fourier transform infrared spectroscopy.