Cellulose nanocrystal-based polymer hydrogel embedded with iron oxide nanorods for efficient arsenic removal

A cellulose nanocrystal (CNC) polymer hydrogel containing magnetic iron oxide nanorods (Fe3O4NRs) was prepared for As(III) removal in water. Systematic studies on the performance of these prepared CNC-based composite hydrogels for the removal of As(III) have been undertaken. The maximum adsorption capacity of the CNC-g-PAA/qP4VP (CPqP) hydrogel was 241.3 mg/g. After introduction of Fe3O4NRs in the hydrogel, the maximum adsorption capacity of the resulting Fe3O4NRs@CNC-g-PAA/qP4VP (FN@CPqP) hydrogel was further improved to 263.0 mg/g. The high adsorption performance can be attributed to the facts that the 3D interconnected porous network of the hydrogel allows As species to easily enter into the hydrogel, the quaternized P4VP chains provides more adsorption sites, Fe3O4NRs uniformly distributed in the internal cavity of the hydrogel significantly reduces the nanoparticle aggregation. The adsorption kinetics indicated that the adsorption of arsenic by the hydrogel was mainly chemisorption. The isotherm analysis revealed that the adsorption of arsenic by the hydrogel was principally monolayer adsorption on a homogeneous surface. Moreover, the as-prepared CNC-based polymer hydrogels exhibited good stability and reusability with negligible performance loss after five adsorption-desorption cycles. The novel FN@CPqP hydrogel demonstrates great potential as a cost-effective adsorbent for the removal of arsenic contaminants from wastewater.

Mesoporous Magnetic/Polymer Hybrid Nanoabsorbent for Rapid and Efficient Removal of Heavy Metal Ions from Wastewater

As an advanced water purification technology, magnetic nanoabsorbents are highly attractive for their sustainability, robustness, and energy efficiency. However, magnetic responsiveness and high adsorptive capacity are irreconcilable during the design and synthesis of a high-performance magnetic nanoabsorbent. Here, we address this issue by designing a kind of mesoporous magnetic polymer hybrid microspheres, where functional polymers such as polyrhodanine and polypyrrole were attached to the pore walls in the interior of mesoporous Fe3O4 microspheres through in situ polymerization. Due to the integrated large saturation magnetic moment, porous structure, and dense polymer layer, the mesoporous magnetic polymer hybrid microspheres demonstrated fast magnetic responsiveness, excellent recycling performance, and high adsorption capacities toward Pb(II) ions (189 mg g-1) for polyrhodanine and Cr(VI) ions (199 mg g-1) for polypyrrole. Furthermore, their potential application in wastewater treatment was verified by a self-made magnetic separation column, where the designed magnetic nanoabsorbent exhibits significant advantages including rapid separation of heavy metal ions and high outflow. This study provided a promising magnetic polymer hybrid nanoabsorbent for realizing efficient removal of heavy metal ions from wastewater.

A rationale for the rapid extraction of ultra-low-level uranyl ions in simulated bioassays regulated by Mn-dopants over magnetic nanoparticles

Although the sorption of uranyl ions and other heavy metal ions over magnetic nanoparticles is well reported, the parameters governing the sorption process over the magnetic nanoparticles have not been clearly enumerated. However, to increase the efficiency of the sorption over the surface of these magnetic nanoparticles, it is essential to understand the different structural parameters that are involved in the sorption process. The sorption of uranyl ions and other competitive ions in simulated urine samples at different pH was effectively accomplished over magnetic nanoparticles of Fe₃O₄ (MNPs) and Mn-doped Fe₃O₄ (Mn-MNPs). The MNPs and Mn-MNPs were synthesized using an easily modified co-precipitation method and were thoroughly characterised using several techniques, such as XRD, HRTEM, SEM, zeta potential, and XPS. The substitutional doping of Mn (1 to 5 at%) in the Fe₃O₄ lattice (Mn-MNPs) showed better sorption ability as compared to that of MNPs. The sorption properties of these nanoparticles were mainly correlated with the different structural parameters to understand the roles of surface charge and different morphological parameters. The interaction centres over the surface of MNPs with the uranyl ions were designated and the effects of ionic interactions with uranyl ions for these sites were calculated. Extensive XPS, ab initio calculations and zeta potential studies have provided deep insights into the different aspects that play key roles in the sorption process. These materials showed one of the best K_d values (∼3 × 10⁶ cm³) in a neutral medium with very low t_1/2 values (∼0.9 min). The fast sorption kinetics (very low t_1/2) makes them amongst the best sorption materials for uranyl ions and optimal for the quantification of ultra-low-level uranyl ions in simulated bioassays.

Synthesis and Characterization of SPIONs Encapsulating Polydopamine Nanoparticles and Their Test for Aqueous Cu2+ Ion Removal

The removal of pollutants, such as heavy metals, aromatic compounds, dyes, pesticides and pharmaceuticals, from water is still an open challenge. Many methods have been developed and exploited for the purification of water from contaminants, including photocatalytic degradation, biological treatment, adsorption and chemical precipitation. Absorption-based techniques are still considered among the most efficient and commonly used approaches thanks to their operational simplicity. In recent years, polydopamine-coated magnetic nanoparticles have emerged for the uptake of heavy metals in water treatment, since they combine specific affinity towards pollutants and magnetic separation capacity. In this context, this work focuses on the synthesis of polydopamine (PDA)-coated Super Paramagnetic Iron Oxide Nanoparticles (PDA@SPIONs) as adsorbents for Cu²⁺ ions, designed to serve as functional nanostructures for the removal of Cu²⁺ from water by applying a magnetic field. The synthetic parameters, including the amount of SPIONs and PDA, were thoroughly investigated to define their effects on the nanostructure features and properties. Subsequently, the ability of the magnetic nanostructures to bind metal ions was assessed on Cu²⁺-containing solutions. A systematic investigation of the prepared functional nanostructures was carried out by means of complementary spectroscopic, morphological and magnetic techniques. Inductively coupled plasma atomic emission spectroscopy (ICP-AES) measurements were performed in order to estimate the Cu²⁺ binding ability. The overall results indicate that these nanostructures hold great promise for future bioremediation applications.

Chitosan-based composite films to remove cationic and anionic dyes simultaneously from aqueous solutions: Modeling and optimization using RSM

Regarding the existence of cationic and anionic dyes in the water environment developing new and effective techniques to remove them simultaneously is essential. Herein, a chitosan/poly-2-aminothiazole composite film reinforced with multi-walled carbon nanotube-Mg Al-layered double hydroxide (CPML) was created, characterized, and used as an effective adsorbent for methylene blue (MB) and methyl orange (MO) dyes removal from the aquatic medium. The SEM, TGA, FTIR, XRD, and BET methods were used to characterize the synthesized CPML. Response surface methodology (RSM) was utilized to evaluate dye removal based on the initial concentration, dosage, and pH factors. The highest adsorption capacities were measured at 471.12 and 230.87 mg g^-1 for MB and MO, respectively. The study of different isotherm and kinetic models revealed that the adsorption of the dyes onto CPML nanocomposite (NC) was correlated with the Langmuir and pseudo-second-order kinetic model, which indicated a monolayer adsorption manner on the homogeneous surface of NCs. The reusability experiment clarified that the CPML NC could be applied multiple times. Experimental results show that the CPML NC has sufficient potential for treating cationic and anionic dye-contaminated water.

Synthesis of new functionalized magnetic nano adsorbents and adsorption performance for Hg(II) ions

Fe₃O₄@SiO₂-NH-nNG-SPTZ (including Fe₃O₄@SiO₂-NH-2NG-SPTZ, Fe₃O₄@SiO₂-NH-3NG-SPTZ) were prepared by 2-mercapto-5-(4-pyridyl)-1,3,4-thiadiazole and the reaction products of 3, 6-dichloropyridazine and cyanuric chloride with Fe₃O₄@SiO₂-NH₂ respectively. Fe₃O₄@SiO₂-S-nNG-SPTZ (including Fe₃O₄@SiO₂-S-2NG-SPTZ, Fe₃O₄@SiO₂-S-3NG-SPTZ) were prepared by 2-mercapto-5-(4-pyridyl)-1,3,4-thiadiazole and the reaction products of 3, 6-dichloropyridazine and cyanuric chloride with Fe₃O₄@SiO₂-SH respectively. Four novel adsorbents were characterized by SEM, TEM, FT-IR and XRD. Hg(II) ions removal efficiency of these adsorbents were more than 95%, in 15–20 min, at pH 7.0–8.0. It is easy to separate these adsorbents that adsorb mercury ions from the solution through magnets. These adsorbents have similar adsorption mechanism and have application value in the treatment of mercury ions in sewage and are worth studying.

Pd-containing magnetic periodic mesoporous organosilica nanocomposite as an efficient and highly recoverable catalyst

A novel magnetic ionic liquid based periodic mesoporous organosilica supported palladium (Fe₃O₄@SiO₂@IL-PMO/Pd) nanocomposite is synthesized, characterized and its catalytic performance is investigated in the Heck reaction. The Fe₃O₄@SiO₂@IL-PMO/Pd nanocatalyst was characterized using FT-IR, PXRD, SEM, TEM, VSM, TG, nitrogen-sorption and EDX analyses. This nanocomposite was effectively employed as catalyst in the Heck reaction to give corresponding arylalkenes in high yield. The recovery test was performed to study the catalyst stability and durability under applied conditions.

Zinc adsorption from aqueous solution on biosorbent from urban pruning waste

In this study, urban pruning waste biosorbent after thermal activation process was used to remove zinc ion from aqueous solution. The zinc adsorption was fast, with values above 98.0% removal after 5 min. The maximum removal achieved was 99.4% in 360 min, at 30°C, pH 5.0, and initial zinc concentration of 10 mg L^-1. The adsorption process was adequately described by the pseudo-second-order kinetic model (R² = 1.000), and data obtained from batch adsorption experiments fitted well with the Langmuir isotherm model. The maximum adsorption capacity of zinc onto urban pruning waste biosorbent was 18.382 mg g^-1 at 30°C. Thus, it is concluded that urban pruning waste can be used as a low-cost alternative biosorbent to remove zinc in aqueous solutions.

Surfactin production in the bioreactor: Emphasis on magnetic nanoparticles application

Surfactin is one of the main lipopeptide biosurfactants produced by different species of Bacillus subtilis. This study aims to analyze the effect of starch-coated Fe0 and Fe3+ nanoparticles on the biomass and biosurfactant production of Bacillus subtilis. Out of 70 soil samples, 20 Bacillus were isolated and genome sequenced by biochemical methods and 16S rRNA gene. Quantitative and qualitative screening methods were used to isolate and detect biosurfactant production. For the aim of this study, 61 and 63 (Bacillus subtilis subsp. Inaquosorum) were selected. Then, hemolytic activity, biomass amount, surfactant production, and reduction of surface tension in Minimal Salt Medium containing Fe0 and Fe3+ nanoparticles were examined after 48, 72, and 96 h of culture. Strain 61 was the best bacterium and Fe3+ was the best nanoparticle. The results were compared with the results of non-nanoparticle bioreactor. The results showed the amount of biomass, surfactin, and surface tension decrease, 72 h after growth in 61 strain containing Fe3+ reached the highest values. Surfactin from strain 61 culture in the Fe3+nanoparticle bioreactor after 72 h of growth showed higher production than the same strain culture after 72 h without Fe3+, if continuing the research, this strain can be commercialized in the future.

Multifunctional Magnetic Oxide Nanoparticle (MNP) Core-Shell: Review of Synthesis, Structural Studies and Application for Wastewater Treatment

The demand for water is predicted to increase significantly over the coming decades; thus, there is a need to develop an inclusive wastewater decontaminator for the effective management and conservation of water. Magnetic oxide nanocomposites have great potentials as global and novel remediators for wastewater treatment, with robust environmental and economic gains. Environment-responsive nanocomposites would offer wide flexibility to harvest and utilize massive untapped natural energy sources to drive a green economy in tandem with the United Nations Sustainable Development Goals. Recent attempts to engineer smart magnetic oxide nanocomposites for wastewater treatment has been reported by several researchers. However, the magnetic properties of superparamagnetic nanocomposite materials and their adsorption properties nexus as fundamental to the design of recyclable nanomaterials are desirable for industrial application. The potentials of facile magnetic recovery, ease of functionalization, reusability, solar responsiveness, biocompatibility and ergonomic design promote the application of magnetic oxide nanocomposites in wastewater treatment. The review makes a holistic attempt to explore magnetic oxide nanocomposites for wastewater treatment; futuristic smart magnetic oxides as an elixir to global water scarcity is expounded. Desirable adsorption parameters and properties of magnetic oxides nanocomposites are explored while considering their fate in biological and environmental media.

Effective degradation of Di-n-butyl phthalate by reusable, magnetic Fe3O4 nanoparticle-immobilized Pseudomonas sp. W1 and its application in simulation

Di-n-butyl phthalate (DBP), one of the most widely used plasticizers, has been listed as a priority pollutant because of its toxicity to both humans and animals. In this study, Pseudomonas sp. W1, isolated from activated sludge, was capable of degrading 99.88% of DBP (1000 mg L^-1) within 8 days. We immobilized the W1 strain using Fe₃O₄ iron nanoparticles (IONPs) coated with poly-dopamine (PDA), and further evaluated its DBP degradation efficiency. The DBP degradation performance of W1 was improved by immobilization, exhibiting 99.69% of DBP degradation efficiency on the 6th day, which was 25.68% higher than un-immobilized W1. After three cycles of magnetic recycling and utilization, W1-PDA-IONPs retained 99.6% of their original efficiency. W1-PDA-IONPs were then used to degrade DBP in landfill leachate. When the proportion of raw leachate was ≤50%, DBP could be all degraded by W1-PDA-IONPs within 6 days. In 100% landfill leachate, DBP degradation efficiency after 10 days of incubation reached 66.40%. Furthermore, W1-PDA-IONPs cells in a simulated aeration system could be effectively magnetically separated at aeration rates from 60 to 600 mL min^-1. These results highlight the potential of W1-PDA-IONPs in the bioremediation of DBP-contaminated waste water.

Synthesis of diglycolic acid functionalized core-shell silica coated Fe3O4 nanomaterials for magnetic extraction of Pb(II) and Cr(VI) ions

Amine-terminated core-shell silica coated magnetite nanoparticles were functionalized with diglycolic acid for the first time to create acid moiety on the surface of the nanoparticles. The formation of magnetite nanoparticles was scrutinised through XRD, SEM, EDS, TEM, VSM and FTIR spectroscopy. The BET surface area of nano-sorbent was found to be 4.04 m2/g with pore size 23.68 nm. These nanomaterials were then utilized to remove the Pb(II) and Cr(VI) ions from their aqueous media and uptake of metal ions was determined by atomic absorption spectroscopy (AAS). A batch adsorption technique was applied to remove both ions at optimised pH and contact time with maximum adsorption efficiency for Pb(II) ions at pH 7 while for Cr(VI) ions at pH 3. Adsorption mechanism was studied using Langmuir and Freundlich isotherms and equilibrium data fitted well for both the isotherms, showing complex nature of adsorption comprising both chemisorption as well as physio-sorption phenomena. The nanosorbents exhibited facile separation by applying external magnetic field due to the ferrimagnetic behaviour with 31.65 emu/g saturation magnetization. These nanosorbents were also found to be used multiple times after regeneration.

Core-shell Fe3O4@Au nanocomposite as dual-functional optical probe and potential removal system for arsenic (III) from Water

We report for the very first time, development of a dual functional nanocomposite to perform as an optical probe as well as removal system for As(III) from ground water. Upon suitable thiolation using dithiothreitol (DTT), the Fe₃O₄(core)-Au(shell) nanocomposite (DTT-Fe₃O₄@Au) has been fabricated that can detect As(III) in aqueous solution with significantly low limit of detection and holds potential for selective removal of As(III) from water owing to its magnetic core. Due to high affinity of -SH groups for As(III), the nanoparticles undergo aggregation in the presence of As(III), resulting in a significant decrease in absorbance, yielding the limit of detection (LOD) as 0.86 ppb, which is much lower than the World Health Organisation (WHO) recommended threshold value of 10 ppb. UV-vis spectroscopy in conjunction with dynamic light scattering and electron microscopy techniques have further elaborated the detailed interaction between As(III) and DTT-Fe₃O₄@Au nanocomposite regarding their size dynamics and solution behaviour during the interaction. Moreover, ca.70% removal of As(III) from aqueous solution by DTT-Fe₃O₄@Au has been observed by ICP-MS measurement strengthening the potential of this nanocomposite as a dual-functional probe and filter.

Graphene based adsorbents for remediation of noxious pollutants from wastewater

The contamination of water resources with noxious pollutants is a serious issue. Many aquatic systems are contaminated with different toxic inorganic and organic species; coming to wastewater from various anthropogenic sources such as industries, agriculture, mining, and domestic households. Keeping in view of this, wastewater treatment appears to the main environmental challenge. Adsorption is one of the most efficient techniques for removing all most all types of pollutants i.e. inorganics and organics. Nowadays, graphene and its composite materials are gaining importance as nano adsorbents. Graphene; a two-dimensional nanomaterial having single-atom graphite layer; has attracted a great interest in many application areas (including wastewater treatment) due to its unique physico-chemical properties. The present paper is focused on the remediation of noxious wastes from wastewater using graphene based materials as adsorbents, and it contains all the details on materials - i.e., from their synthesis to application in the field of wastewater treatment (removal of hazardous contaminants of different chemical nature - heavy and rare-earth metal ions, and organic compounds - from wastewater effluents. The efficiency of the adsorption and desorption of these substances is considered. Certainly, this article will be useful for nano environmentalist to design future experiments for water treatment.

Micromixing Efficiency of Particles in Heavy Metal Removal Processes under Various Inlet Conditions

Water quality problems are a persistent global issue since population growth has continually stressed hydrological resources. Heavy metals released into the environment from plating plants, mining, and alloy manufacturing pose a significant threat to the public health. A possible solution for water purification from heavy metals is to capture them by using nanoparticles in micromixers. In this method, conventionally heavy metal capture is achieved by effectively mixing two streams, a particle solution and the contaminated water, under the action of external magnetic fields. In the present study, we investigated the effective mixing of iron oxide nanoparticles and water without the use of external magnetic fields. For this reason, the mixing of particles and the contaminated water was studied for various inlet velocity ratios and inflow angles of the two streams using computational fluid dynamics techniques. The Navier-Stokes equations were solved for the water flow, the discrete motion of particles was evaluated by a Lagrangian method, while the flow of substances of the contaminated water was studied by a scalar transport equation. Results showed that as the velocity ratio between the inlet streams increased, the mixing of particles with the contaminated water was increased. Therefore, nanoparticles were more uniformly distributed in the duct and efficiently absorbed the substances of the contaminated water. On the other hand, the angle between two streams was found to play an insignificant role in the mixing process. Consequently, the results from this study could be used in the design of more compact and cost efficient micromixer devices.

Preparation and characterization of amino/thiol bifunctionalized magnetic nanoadsorbent and its application in rapid removal of Pb (II) from aqueous system

To explore the effect of coexisted amino and thiol groups on adsorption of heavy metal, a novel magnetic nanoparticle was prepared by sequentially modification with (3-Chloropropyl) trimethoxysilan, polyetherimide, epichlorohydrin and thiourea. Subsequently, it was characterized by TEM, N₂ adsorption/desorption, FTIR Spectroscopy, zeta potential, and VSM. The maximum adsorption capacity for Pb²⁺, Cd²⁺ and Cu²⁺ reached 110.13 mg·g^-1, 40.23 mg·g^-1 and 29.37 mg·g^-1, respectively. The adsorption of the magnetic nanoparticles with different surface group for heavy metals were compared, which indicated that the amino and thiol group played an important role in the adsorption of heavy metals. Especially, the adsorption capacity increased dramatically after modification with the thiol group, which was attributed to the synergistic coordination of -NH₂ and -SH. The adsorption kinetics is consistent with the quasi-second-order kinetics equation, and the adsorption thermodynamic process is consistent with the Langmuir isotherm equation. The effects of experimental conditions, such as pH, the concentration of metals, adsorption time and temperature, on adsorption of Pb²⁺ were studied in detail. In addition, over 90% of removal rate was remained after 6 cycles. The magnetic nanoadsorbents was a promising nanoadsorbent with high adsorption speed, simultaneous adsorption of various heavy metals, strong anti-interference ability and reusability.

Conducting Polymer Coating on a High-Voltage Cathode Based on Soft Chemistry Approach toward Improving Battery Performance

The surface of a 5 V class LiNi_0.5Mn_1.5O₄ particle is modified with poly(3,4-ethylenedioxythiophene) (PEDOT) conducting polymer by utilizing the hydrophobic characteristics of the 3,4-ethylenedioxythiophene (EDOT) monomer and the tail group of cetyl trimethyl ammonium bromide (CTAB) surfactants, in addition to the electrostatic attraction between cationic CTAB surfactant and cathode materials with a negative ζ potential in aqueous solution. With this novel concept, we design and prepare a uniform EDOT monomer layer on the cathode materials, and chemical polymerization of the EDOT coating layer is then carried out to achieve PEDOT-coated cathode materials via a simple one-pot preparation process. This uniform conducting polymer layer provides notable improvement in the power characteristics of electrodes, and stable electrochemical performance can be obtained especially at severe operating conditions such as the fully charged state and elevated temperatures owing to the successful suppression of the side reaction between the oxide particle and the electrolyte as well as the suppression of Mn dissolution from the oxide material.

Synthesis and Characterization of the Conducting Polymer Micro-Helix Based on the Spirulina Template

As one of the most interesting naturally-occurring geometries, micro-helical structures have attracted attention due to their potential applications in fabricating biomedical and microelectronic devices. Conventional processing techniques for manufacturing micro-helices are likely to be limited in cost and mass-productivity, while Spirulina, which shows natural fine micro-helical forms, can be easily mass-reproduced at an extremely low cost. Furthermore, considering the extensive utility of conducting polymers, it is intriguing to synthesize conducting polymer micro-helices. In this study, PPy (polypyrrole), PANI (polyaniline), and PEDOT (poly(3,4-ethylenedioxythiophene)) micro-helices were fabricated using Spirulinaplatensis as a bio-template. The successful formations of the conducting polymer micro-helix were confirmed using scanning electron microscopy (SEM). Fourier transform infrared spectroscopy (FTIR) and Raman and X-ray diffraction (XRD) were employed to characterize the molecular structures of the conducting polymer in micro-helical forms. In the electrochemical characterization, the optimized specific capacitances for the PPy micro-helix, the PANI micro-helix, and the PEDOT micro-helix were found to be 234 F/g, 238 F/g at the scan rate of 5 mV/s, and 106.4 F/g at the scan rate of 10 mV/s, respectively. Therefore, it could be expected that other conducting polymer micro-helices with Spirulina as a bio-template could be also easily synthesized for various applications.

Hydrophilic and positively charged polyethylenimine-functionalized mesoporous magnetic clusters for highly efficient removal of Pb(II) and Cr(VI) from wastewater

We develop mesoporous magnetic clusters (MMCs) functionalized with hydrophilic branched polyethylenimine (b-PEI), later called b-MG, and MMCs functionalized with positively charged b-PEI (p-MG). These materials efficiently remove Pb(II) and Cr(VI) from wastewater. Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, thermogravimetric analysis, and nitrogen adsorption-desorption analysis results clearly indicate that hydrophilic b-PEI and positively charged b-PEI are successfully attached to the MMC surfaces. Wide-angle X-ray diffraction, high-resolution transmission electron microscopy, and field-emission scanning electron microscopy analyses confirm that the crystal structures and morphologies of the MMCs are maintained well even when wet chemical modification processes are used to introduce hydrophilic b-PEI and positively charged b-PEI to the MMC surfaces. Langmuir and Sips isotherm models are applied to describe Pb(II) adsorption behavior of the b-MG and Cr(VI) adsorption behavior of the p-MG. The isotherm models indicate that the maximum adsorption capacities of b-MG and p-MG, respectively, are 216.3 and 334.1 mg g^-1, respectively. These are higher than have previously been found for other adsorbents. In reusability tests, using magnetic separation and controlling the pH, the Pb(II) recovery efficiency of the b-MG is 95.6% and the Cr(VI) recovery efficiency of the p-MG is 68.0% even after the third cycle.

A novel approach to prepare Bi2Fe4O9 flower-like spheres with enhanced photocatalytic performance

A novel two-step approach consisting of hydrothermal process and subsequently selective etching has been developed to prepare flower-like three-dimensional porous Bi₂Fe₄O₉ spheres with good uniformity and highly photocatalytic performance. XRD patterns and SEM images reveal that the Bi₂Fe₄O₉ phase does not exhibit any changes after the etching process, and the crystal morphology evolves from micro-platelets to flower-like three-dimensional porous Bi₂Fe₄O₉ spheres by controlling the experiment parameters. The change of morphology will lead to the significant increase of specific surface area, which would be beneficial to the enhancement of photocatalytic performance owing to prominent absorption in the ultraviolet and visible light region. As compared to Bi₂Fe₄O₉ microplatelets, flower-like three-dimensional porous Bi₂Fe₄O₉ spheres exhibit excellent photocatalytic degration rate of methyl orange (MO).

In-situ one-step synthesis of carbon-encapsulated naked magnetic metal nanoparticles conducted without additional reductants and agents

C-encapsulated highly pure Ni, Co, and Fe magnetic nanoparticles (MNPs/C) were synthesized by an innovative one-step in-situ plasma in liquid method (solution plasma processing, SPP) without any additional reductants, agents, or treatment. Successful encapsulation of MNPs was demonstrated by using inductively coupled plasma-atomic emission spectrometry and cyclic voltammetry techniques. The obtained X-ray diffraction patterns and transmission electron microscopy images corresponded to MNPs with average diameters of 5 nm and good crystalline structure. The C capsules with spherical shapes (containing onion-like layers) were characterized by uniform sizes (ranging from 20 nm to 30 nm) and chain-like morphologies. The synthesized MNPs/C exhibited superparamagnetic properties at room temperature and might be utilized in data storage, biomedical, and energy applications since various NPs (including bimetallic ones) could be easily prepared by changing working electrodes. This study shows the potential of SPP to be a candidate for the next-generation synthesis method of NPs/C.

Micro-Nanocomposites in Environmental Management

Water pollution, a worldwide issue for the human society, has raised global concerns on environmental sustainability, calling for high-performance materials for effective treatments. Since the traditional techniques have inherent limitations in treatment speed and efficiency, nanotechnology is subsequently used as an environmental technology to remove pollutants through a rapid adsorption and degradation process. Therefore, here, various adsorbent and photodegradation composite materials leading to effective water remediation are summarized and predicted. Notably, recent advances in simultaneous adsorption and photodegradation micro-nanocomposites are outlined. Such materials can not only completely adsorb and remove contaminants, but the micro-nanocomposites can also be directly reused without further treatment. Finally, the future development of this unique system is discussed.

The application of prepared porous carbon materials: Effect of different components on the heavy metal adsorption

In this study, five typical municipal solid waste (MSW) components (tyres, cardboard, polyvinyl chloride (PVC), acrylic textile, toilet paper) were used as raw materials to prepare four kinds of MSW-based carbon materials (paperboard-based carbon materials (AC1); the tyres and paperboard-based carbon materials (AC2); the tyres, paperboard and PVC-based carbon materials (AC3); the tyres, paperboard, toilet paper, PVC and acrylic textile-based carbon materials (AC4)) by the KOH activation method. The characteristic results illustrate that the prepared carbon adsorbents exhibited a large pore volume, high surface area and sufficient oxygen functional groups. Furthermore, the application of AC1, AC2, AC3, AC4 on different heavy metal (Cu(2+), Zn(2+), Pb(2+), Cr(3+)) removals was explored to investigate their adsorption properties. The effects of reaction time, pH, temperature and adsorbent dosage on the adsorption capability of heavy metals were investigated. Comparisons of heavy metal adsorption on carbon of different components were carried out. Among the four samples, AC1 exhibits the highest adsorption capacity for Cu(2+); the highest adsorption capacities of Pb(2+) and Zn(2+) are obtained for AC2; that of Cr(3+) are obtained for AC4. In addition, the carbon materials exhibit better adsorption capability of Cu(2+) and Pb(2+) than the other two kind of metal ions (Zn(2+) and Cr(3+)).

Novel Functionalized Polythiophene-Coated Fe₃O₄ Nanoparticles for Magnetic Solid-Phase Extraction of Phthalates

Poly(phenyl-(4-(6-thiophen-3-yl-hexyloxy)-benzylidene)-amine) (P3TArH) was successfully synthesized and coated on the surface of Fe₃O₄ magnetic nanoparticles (MNPs). The nanocomposites were characterized by Fourier transform infra-red (FTIR), X-ray diffractometry (XRD), Brunauer-Emmett-Teller (BET) surface area analysis, analyzer transmission electron microscopy (TEM) and vibrating sample magnetometry (VSM). P3TArH-coated MNPs (MNP@P3TArH) showed higher capabilities for the extraction of commonly-used phthalates and were optimized for the magnetic-solid phase extraction (MSPE) of environmental samples. Separation and determination of the extracted phthalates, namely dimethyl phthalate (DMP), diethyl phthalate (DEP), dipropyl phthalate (DPP), dibutyl phthalate (DBP), butyl benzyl phthalate (BBP), dicyclohexyl phthalate (DCP), di-ethylhexyl phthalate (DEHP) and di-n-octyl phthalate (DNOP), were conducted by a gas chromatography-flame ionization detector (GC-FID). The best working conditions were as follows; sample at pH 7, 30 min extraction time, ethyl acetate as the elution solvent, 500-µL elution solvent volumes, 10 min desorption time, 10-mg adsorbent dosage, 20-mL sample loading volume and 15 g·L-1 concentration of NaCl. Under the optimized conditions, the analytical performances were determined with a linear range of 0.1⁻50 µg·L-1 and a limit of detection at 0.08⁻0.468 µg·L-1 for all of the analytes studied. The intra-day (n = 7) and inter-day (n = 3) relative standard deviations (RSD%) of three replicates were each demonstrated in the range of 3.7⁻4.9 and 3.0⁻5.0, respectively. The steadiness and reusability studies suggested that the MNP@P3TArH could be used up to five cycles. The proposed method was executed for the analysis of real water samples, namely commercial bottled mineral water and bottled fresh milk, whereby recoveries in the range of 68%⁻101% and RSD% lower than 7.7 were attained.

Superparamagnetic nalidixic acid grafted magnetite (Fe3O4/NA) for rapid and efficient mercury removal from water

A new nanomaterial, nalidixic acid grafted magnetite (Fe₃O₄/NA), was synthesized via a chemical reaction with nano sized magnetite particles.

Enhanced removal performance of arsenate and arsenite by magnetic graphene oxide with high iron oxide loading

Magnetic iron oxide/graphene oxide (MGO) with high iron loading (51 wt%) has been successfully synthesized using the co-precipitation method, and then used as adsorbents for the removal of arsenate and arsenite from aqueous solutions. The resulting MGO possesses desirable magnetic properties (12.8 emu g(-1)) and excellent adsorption properties for the removal of As(III) and As(IV) with significantly enhanced adsorption capacities of 54.18 mg g(-1) and 26.76 mg g(-1), respectively. These values are much higher than those of other GO-based composites reported previously. The kinetic, equilibrium and environmental effects (pH, ionic strength, coexist anion) of MGO were obtained experimentally. A synchrotron-based X-ray fluorescent microprobe was used to generate elemental distribution maps of adsorbents; the results suggest that As(v) became preferentially associated with iron oxides during the adsorption process, and that the distribution of Fe is directly correlated with the distribution of As.

The removal of heavy metal ions from wastewater/aqueous solution using polypyrrole-based adsorbents: a review

Water pollution caused by heavy metal ions is becoming a serious threat to human and aquatic lives day by day.

Removal of endocrine disruptor di-(2-ethylhexyl)phthalate by modified polythiophene-coated magnetic nanoparticles: characterization, adsorption isotherm, kinetic study, thermodynamics

Superparamagnetic nanosorbent poly(phenyl(4-(6-thiophen-3-yl-hexyloxy)-benzylidene)-amine)/Fe₃O₄ nanoparticles (Fe₃O₄@P3TArH) were successfully synthesized via a simplistic method for the enhanced extraction of potent endocrine disruptor, di-(2-ethylhexyl)phthalate (DEHP).