Ultrasensitive enantiomeric barbiturate analysis in body fluids through capillary electrophoresis with large volume sample stacking and ultrasound assisted dispersive liquid liquid microextraction

A rapid, straightforward, and sensitive approach to quantifying enantiomeric barbiturates in serum was developed by integrating ultrasound-assisted dispersive liquid-liquid microextraction (UA-DLLME) with large-volume sample stacking (LVSS) in capillary electrophoresis (CE). UA-DLLME was employed for sample preparation, and on-column preconcentration by using LVSS with polarity switching was implemented to enhance sensitivity. We thoroughly investigated and optimized various parameters influencing extraction and stacking to achieve optimal detection performance with the highest enrichment efficiencies. Under optimal extraction conditions (injection of a mixed solution containing 40 μL of CHCl3 and 200 μL of tetrahydrofuran into 1 mL of a sample solution at pH 10.0), LVSS was performed using 600 mM Tris-boric acid (pH 9.5) containing 35 mM hydroxypropyl-β-cyclodextrin and sodium taurodeoxycholate hydrate. A voltage of 20 kV was applied and a preinjection water plug was loaded at a height of 25 cm for 10 s. Subsequently, the sample solution was injected at a height of 25 cm for 480 s, after which a voltage of -20 kV was applied and the sample stacking was initiated. The stacking process was completed when 95 % of the separation current was attained. Under optimized conditions, the contraction folds of the four barbiturate analytes (R, S-Secobarbital, R, S-pentobarbital) were improved by approximately 6400-fold, achieving detection limits of 0.1 ng/mL. The limits of quantification for all analyte enantiomers were 0.5-50 ng/mL, demonstrating good linearity (r > 0.997). Migration times exhibited a relative standard deviation of less than 1.7 %, whereas peak areas for the four analytes exhibited a deviation of 8.7 %. Finally, the established method was effectively applied to the analysis of human serum samples.

Ultrasound and surfactant-assisted dispersive liquid-liquid microextraction prior to poly(ethylene oxide)-mediated stacking in CE for highly sensitive determination of barbiturates in human fluids

This study developed a facile, highly sensitive technique for extracting and quantifying barbiturates in serum samples. This method combined ultrasound and surfactant-assisted dispersive liquid-liquid microextraction with poly(ethylene oxide)-mediated stacking in capillary electrophoresis. Factors influencing the extraction and stacking performance, such as the type and volume of extraction solvents, the type and concentration of surfactant, extraction time, salt additives, sample matrix, solution pH, and composition of the background electrolyte, were carefully studied and optimized to achieve the optimal detection sensitivity. Under the optimized extraction (injecting 140 μL C2 H4 Cl2 into 1 mL of sample with pH 4 (5 mM sodium phosphate containing 0.05 mM Tween 20 and sonication for 1 min) and separation conditions (150 mM tris(hydroxymethyl)aminomethane-borate with pH 8.5 containing 0.5% (m/v) poly(ethylene oxide)), the limits of detection (signal-to-noise ratio = 3) of five barbiturates ranged from 0.20 to 0.33 ng/mL, and the calculated sensitivity improvement ranged from 868- to 1700-fold. The experimental results revealed excellent linearity (R2  > 0.99), with relative standard deviations of 2.1%-3.4% for the migration time and 4.3%-5.7% for the peak area. The recoveries of the spiked serum samples were 97.1% -110.3%. Our proposed approach offers a rapid and practical method for quantifying barbiturates in biological fluids.

Recent Progresses in Sensitive Determination of Drugs of Abuse by Capillary Electrophoresis

Background:

Today, “drugs of abuse” pose serious social problems such as many crimes, medical treatment costs, and economic repercussions. Several worldwide clinical laboratories use analytical separation methods to analyze their patient samples for drugs and poisons. In this way, they provide qualitative and quantitative data on the substances in various biological matrices (e.g., urine, plasma or serum, saliva, and breath).

Methods:

An extensive review of the published articles indicates that the use of Capillary Electrophoresis (CE) coupled with sensitivity enhancing methods is a very attractive area of interest in the assay of drugs of abuse.

Results:

This review was prepared to have a comprehensive study on applications of sensitivity enhancing methods on the determination of drugs of abuse especially from 2007 to present. The sample preconcentration approaches almost address all methods from online preconcentration (both electrophoretic and chromatographic-based methods) to offline preconcentration. Furthermore, detection system modification and capillary column fabrications were investigated in order to increase the detection sensitivity of complex samples in CE.

Conclusion:

The present review summarizes the most recent developments in the detection of drugs of abuse using CE. Although CE still has a limitation in sensitive detection, several publications in recent years have proposed valuable methods to overcome this problem.

CE with multi-walled carbon nanotubes (MWCNTs). Part II. SDS coated functionalized MWCNTs as pseudo-stationary phases in nanoparticle EKC - Retention behaviors of small and large solutes

In this study, functionalized multi-walled carbon nanotubes (MWCNTs), namely hydroxylated MWCNTs (MWCNT-OH), carboxylated MWCNTs (MWCNT-COOH) and sulfonated MWCNTs (MWCNT-SO₃H) coated with sodium dodecyl sulfate (SDS) were demonstrated as effective pseudo-stationary phases (PSPs) in the separation of various species by the nanoparticle capillary electrokinetic chromatography (NPEKC) mode of capillary electrophoresis (CE). Due to the significant increase in their surface charge density in the presence of SDS, the three SDS coated MWCNTs yielded high performance separation for herbicides, barbiturates, dansyl-DL-amino acids (Dns-AAs), dipeptides and proteins by NPEKC. In addition, high resolution tryptic peptide maps of three standard proteins including myoglobin, cytochrome C and lysozyme were readily obtained. The three PSPs systems yielded high plate numbers that spanned a wide range of values depending on the type of species. The values of the observed selectivity factors (i.e., α values) were significantly different among the three PSPs for solutes that underwent strong interactions with the SDS coated functionalized MWCNTs while for negatively charged solutes (e.g., Dns-AAs) of the same charge sign as the PSPs the α values were about the same on the three different PSPs indicating weak association with the PSPs and signaling separation based chiefly on the differences in electro-migration arising from differences in charge-to-mass ratios.

Ionophore-based potentiometric PVC membrane sensors for determination of phenobarbitone in pharmaceutical formulations

The fabrication and development of two polyvinyl chloride (PVC) membrane sensors for assaying phenobarbitone sodium are described. Sensors 1 and 2 were fabricated utilizing β- or γ-cyclodextrin as ionophore in the presence of tridodecylmethylammonium chloride as a membrane additive, and PVC and dioctyl phthalate as plasticizer. The analytical parameters of both sensors were evaluated according to the IUPAC guidelines. The proposed sensors showed rapid, stable anionic response (-59.1 and -62.0 mV per decade) over a relatively wide phenobarbitone concentration range (5.0 × 10-6-1 × 10-2 and 8 × 10-6-1 × 10-2 mol L-1) in the pH range of 9-11. The limit of detection was 3.5 × 10-6 and 7.0 × 10-6 mol L-1 for sensors 1 and 2, respectively. The fabricated sensors showed high selectivity for phenobarbitone over the investigated foreign species. An average recovery of 2.54 μg mL-1 phenobarbitone sodium was 97.4 and 101.1 %, while the mean relative standard deviation was 3.0 and 2.1 %, for sensors 1 and 2, respectively. The results acquired for determination of phenobarbitone in its dosage forms utilizing the proposed sensors are in good agreement with those obtained by the British Pharmacopoeial method.

Contemporary sample stacking in analytical electrophoresis

Sample stacking is a term denoting a multifarious class of methods and their names that are used daily in CE for online concentration of diluted samples to enhance separation efficiency and sensitivity of analyses. The essence of these methods is that analytes present at low concentrations in a large injected sample zone are concentrated into a short and sharp zone (stack) in the separation capillary. Then the stacked analytes are separated and detected. Regardless of the diversity of the stacking electromigration methods, one can distinguish four main principles that form the bases of nearly all of them: (i) Kohlrausch adjustment of concentrations, (ii) pH step, (iii) micellar methods, and (iv) transient ITP. This contribution is a continuation of our previous reviews on the topic and brings an overview of papers published during 2010-2012 and relevant to the mentioned principles (except the last one which is covered by another review in this issue).

A review of developments in the methodology and application of microemulsion electrokinetic chromatography

MEEKC is a mode of CE, which utilizes microemulsion (ME) as the BGE to achieve separation of a diverse range of analytes. MEs are composed of nanometer-sized oil droplets suspended in aqueous buffer which are stabilized by the presence of a surfactant and co-surfactant. These MEs are commonly referred to as oil-in-water MEs and their application in MEEKC has been extensively examined. This review details advances in the theory, methodology, and application of MEEKC during the period 2010-2012. Areas covered include online sample concentration, advances in chiral separations, use of coated capillaries, chemometric approaches, and the use of novel additives to the ME system. This review also provides the reader with an introduction to MEEKC and a presentation of recent applications.