Reduced sulfur accelerates Fe(III)/Fe(II) recycling in FeS2 surface for enhanced electro-Fenton reaction

FeS2 is well-known for its role in redox reactions. However, the mechanism within heterogeneous electron-Fenton (Hetero-EF) systems remains unclear. In this study, a novel FeS2 based three-dimensional system (GF/Cu-FeS2) with self-generation of H2O2 was investigated for Hetero-EF degradation of sulfamethazine (SMZ). The results revealed that SMZ could be completely removed in 1.5 h, accompanying with the mineralization efficiency of 96% within 4 h. This system performed excellent stability, evidenced by consistently eliminated 100% of SMZ within 2 h over 4 cycles. The generated Reactive Oxygen Species (ROS) of •OH and •O2- in every degradation cycle were quantitatively measured to confirm the stability of the GF/Cu-FeS2 system. Additionally, the redox reaction mechanism on the surface of FeS2 was thoroughly analyzed in detail. The accelerated reduction of Fe(III) to Fe(II), triggered by S22- on the surface of FeS2, promoted the iron cycling, thereby quickening the Fenton process. Density Functional Theory (DFT) results illustrated the process of S22- to be oxidized to in detail. Therefore, this work provides deeper insight into the mechanistic role of S22- in FeS2 for environmental remediation.

Framework confinement of multi-metals within silica hollow spheres by one-pot synthesis process

The control incorporation of metals in silica hollow spheres (SHSs) may bring new functions to silica mesoporous structures for applications including catalysis, sensing, molecular delivery, adsorption filtration, and storage. However, the strategies for incorporating metals, whether through pre-loading in the hollow interior or post-encapsulation in the mesoporous shell, still face challenges in achieving quantitative doping of various metals and preventing metal aggregation or channel blockage during usage. In this study, we explored the doping of different metals into silica hollow spheres based on the dissolution-regrowth process of silica. The process may promote the formation of more structural defects and functional silanol groups, which could facilitate the fixation of metals in the silica networks. With this simple and efficient approach, we successfully achieved the integration of ten diverse metal species into silica hollow sphere (SHS). Various single-metal, dual-metal, triple-metal, and quadruple-metal doped SHSs have been prepared, with the doped metals being stable and homogeneously dispersed in the structure. Based on the structural characterizations, we analyzed the influence of metal types on the morphology features of SHSs. The synergistic effects of multi-metals on the catalysis applications were also studied and compared.

Metal-free electrified membranes for contaminants oxidation: Synergy effect between membrane rejection and nanoconfinement

Electro-Fenton processes are frequently impeded by depletion of metal catalysts, unbalance between H2O2 generation and activation, and low concentration of reactive species (e.g., •OH) in the bulk solution. A metal-free electro-Fenton membrane was fabricated with nitrogen-doped carbon nanotube (N-CNT) and reduced graphene oxide (RGO). N-CNT acted as a catalyst for both H2O2 generation and activation, while the incorporated RGO served as the second catalyst for H2O2 generation and improved the performance of membrane rejection. The electrified membrane was optimized in terms of nitrogen precursors selection and composition of N-CNT and RGO to achieve optimal coupling between H2O2 generation and activation. The membrane fabricated with 67% mass of N-CNT with urea as the precursor achieved over 95% removal of the target contaminants in a single pass through the membrane with a water flux of 63 L m-2 h-1. This membrane also exhibited efficient transformation of various concentrations of contaminants (i.e., 1-10 mg L-1) over a broad range of pH (i.e., 3-9). Due to its good durability and low energy consumption, the metal-free electro-Fenton membrane holds promise for practical water treatment application. The concentration-catalytic oxidation model elucidated that the elevated contaminant concentration near the membrane surface enhanced the transformation rate by 40%. The nanoconfinement enhanced the transformation rate constant inside the membrane by a factor of 105 because of elevated •OH concentration inside the nanopores. Based on the prediction of this model, the configuration of the membrane reactor has been optimized.

Bio-Based Aerogels for the Removal of Heavy Metal Ions and Oils from Water: Novel Solutions for Environmental Remediation

Contamination of the aqueous environment caused by the presence of heavy metal ions and oils is a growing concern that must be addressed to reduce their detrimental impact on living organisms and safeguard the environment. Recent efficient and environmentally friendly remediation methods for the treatment of water are based on third-generation bioaerogels as emerging applications for the removal of heavy metal ions and oils from aqueous systems. The peculiarities of these materials are various, considering their high specific surface area and low density, together with a highly porous three-dimensional structure and tunable surface chemistry. This review illustrates the recent progress in aerogels developed from cellulose and chitosan as emerging materials in water treatment. The potential of aerogel-based adsorbents for wastewater treatment is reported in terms of adsorption efficacy and reusability. Despite various gaps affecting the manufacturing and production costs of aerogels that actually limit their successful implementation in the market, the research progress suggests that bio-based aerogels are ready to be used in water-treatment applications in the near future.

Simultaneous Desalination and Glyphosate Degradation by a Novel Electro-Fenton Membrane Distillation Process

The industrial effluent from glyphosate production has high salinity and refractory organic contaminants. The removal of organics and the recycling of inorganic salts from this kind of water are challenging issues. In this study, electro-Fenton (EF) and membrane distillation (MD) were coupled in a single reactor utilizing a membrane-based electrode (Mem-GDE) with the ability to bidirectionally transfer vapor and oxygen and electrochemically synthesize H2O2. The operating thermal conditions for MD significantly promoted Fenton reactions and, thus, the removal of glyphosate. During operation, Fe species deposited on the Mem-GDE and enhanced its catalytic activity and adsorptive capacity, which markedly increased the apparent reaction rate constant of glyphosate by 6 times. This novel EF-MD process simultaneously removed organics and concentrated the inorganics, which is very meaningful for decreasing the costs for subsequent crystallization and achieving high-quality crystal salts. This study provides an efficient method for the treatment of organic-inorganic hybrid wastewater.

Adsorption and Photodegradation of Lanasol Yellow 4G in Aqueous Solution by Natural Zeolite Treated by CO2-Laser Radiation

Natural zeolite is a widely used material with excellent environmental cleaning performance, especially in water and wastewater treatment. Natural zeolite (Z_ini) calcined by CO₂-laser radiation (ZL) was tested as a catalyst for the photodegradation and the adsorption of industrial azo dye Lanasol Yellow 4G (LY4G) in water. Morphology, chemical structure, and surface composition of Z_ini and ZL were analyzed by XRD, SEM, EDS, and XPS. UV/Visible spectrophotometry was used to evaluate the photocatalytic activity of Z_ini and ZL. The photocatalytic activity of the studied zeolites was associated with the presence of Fe oxides in their composition. Laser-treated natural zeolite showed higher efficiency as a photocatalyst compared to untreated natural zeolite.

H2O2 activation and contaminants removal in heterogeneous Fenton-like systems

Emerging contaminants can be removed effectively in heterogeneous Fenton-like systems. Currently, catalyst activity and contaminant removal mechanisms have been studied extensively in Fenton-like systems. However, a systematic summary was lacking. This review summarized: 1) The effects of various heterogeneous catalysts on emerging contaminants degradation by activating H₂O₂; 2) The role of active sites in different catalysts during the activation of H₂O₂ and their contribution to the generation of active species; 3) The modulation of degradation pathways of emerging contaminants. This paper will help scholars to advance the controlled construction of active sites in heterogeneous Fenton-like systems. Suitable heterogeneous Fenton catalysts can be selected in practical water treatment processes.

From Fenton and ORR 2e−-Type Catalysts to Bifunctional Electrodes for Environmental Remediation Using the Electro-Fenton Process

Currently, the presence of emerging contaminants in water sources has raised concerns worldwide due to low rates of mineralization, and in some cases, zero levels of degradation through conventional treatment methods. For these reasons, researchers in the field are focused on the use of advanced oxidation processes (AOPs) as a powerful tool for the degradation of persistent pollutants. These AOPs are based mainly on the in-situ production of hydroxyl radicals (OH•) generated from an oxidizing agent (H2O2 or O2) in the presence of a catalyst. Among the most studied AOPs, the Fenton reaction stands out due to its operational simplicity and good levels of degradation for a wide range of emerging contaminants. However, it has some limitations such as the storage and handling of H2O2. Therefore, the use of the electro-Fenton (EF) process has been proposed in which H2O2 is generated in situ by the action of the oxygen reduction reaction (ORR). However, it is important to mention that the ORR is given by two routes, by two or four electrons, which results in the products of H2O2 and H2O, respectively. For this reason, current efforts seek to increase the selectivity of ORR catalysts toward the 2e− route and thus improve the performance of the EF process. This work reviews catalysts for the Fenton reaction, ORR 2e− catalysts, and presents a short review of some proposed catalysts with bifunctional activity for ORR 2e− and Fenton processes. Finally, the most important factors for electro-Fenton dual catalysts to obtain high catalytic activity in both Fenton and ORR 2e− processes are summarized.

Enhanced H2O2 utilization efficiency in Fenton-like system for degradation of emerging contaminants: Oxygen vacancy-mediated activation of O2

Hydrogen peroxide (H₂O₂) is the most commonly used oxidant in advanced oxidation processes for emerging organic contaminant degradation. However, the activation of H₂O₂ to generate reactive oxygen species is always accompanied by O₂ generation resulting in H₂O₂ waste. Here, we prepare a Ti doped Mn₃O₄/Fe₃O₄ ternary catalyst (Ti-Mn₃O₄/Fe₃O₄) to create abundant oxygen vacancies (OVs), which yields electron delocalization impacts on enhancing the electrical conductivity, accelerating the activation of O₂ to produce H₂O₂. In Ti-Mn₃O₄/Fe₃O₄/H₂O₂ system, OVs-mediated O₂/O₂^•-/H₂O₂ redox cycles trigger the activation of locally generated O₂, boost the regeneration of O₂^•- and on site produce H₂O₂ for replenishment. This leads to a 100% removal of tiamulin in 30 min at an unprecedented H₂O₂ utilization efficiency of 96.0%, which is 24 folds higher than that with Fe₃O₄/H₂O₂. Importantly, further integration of Ti-Mn₃O₄/Fe₃O₄ catalysts into membrane filtration achieved high rejections of tiamulin (> 83.9%) from real surface water during a continuous 12-h operation, demonstrating broad pH adaptability, excellent catalytic stability and leaching resistance. This work demonstrates a feasible strategy for developing OVs-rich catalysts for improving H₂O₂ utilization efficiency via activation of locally generated oxygen during the Haber-Weiss reaction.

High-Efficiency Chemical-Mechanical Magnetorheological Finishing for Ultra-Smooth Single-Crystal Silicon

To improve the material removal efficiency and surface quality of single-crystal silicon after magnetorheological finishing, a novel green chemical-mechanical magnetorheological finishing (CMMRF) fluid was developed. The main components of the CMMRF fluid are nano-Fe₃O₄, H₂O₂, CH₃COOH, nanodiamond, carbonyl iron powder, and deionized water. The novel CMMRF fluid can simultaneously achieve Ra 0.32 nm (0.47 mm × 0.35 mm measurement area), Ra 0.22 nm (5 μm × 5 μm measurement area), and 1.91 × 10^-2 mm³/min material removal efficiency. Comprehensive studies utilizing a scanning electron microscope and a magnetic rheometer show that the CMMRF fluid has a high mechanical removal effect due to the well-dispersed nanodiamond and nano-Fe₃O₄ particles. The results of Fourier transform infrared spectra and Young's modulus test reveal the mechanism of the chemical reaction and the mechanical characteristics deterioration of the modified layer. Under co-enhanced chemical and mechanical effects, an ultra-smooth and highly efficient MRF technology for single-crystal silicon is realized.

Fenton oxidation catalysed by heterogeneous iron-perlite for 8-hydroxyquinoline-5-sulfonic acid (8-HQS) degradation: efficiency comparison using raw and calcined perlite as precursors for iron fixation

Herein, the catalytic activity of two types of iron-loaded perlite catalysts prepared by impregnation of raw and calcined perlite in terms of 8-hydroxyquinoline-5-sulfonic acid (8-HQS) degradation was investigated by the Fenton reaction. Different iron contents were used to optimize the Fenton catalytic reaction. The as-prepared catalysts were characterized using different spectrophotometry techniques. The effect of some operating parameters on the Fenton oxidation of 8-HQS was carried out. Iron content of 10% has led to the highest catalytic efficiency. Furthermore, the oxidation of 8-HQS is highly affected by the addition of H₂O₂, proposing that the heterogeneous Fenton reaction has been successfully activated. Whatever the type of the used catalyst, the heterogeneous catalytic oxidation process is extremely rapid, even instantaneous. The synthesized catalysts remained potentially active and retained their catalytic activity for successive Fenton reactions suggesting their economic benefit over the homogenous Fenton process. Accordingly, the newly prepared heterogeneous solid could be successfully used to treat wastewater effluents containing persistent organic compounds.

Activated Carbon Assisted Fenton-like Treatment of Wastewater Containing Acid Red G

The Fenton reaction as an effective advanced oxidation technology has been widely used in wastewater treatment for its stable effluent quality, simple operation, mild condition, and higher organic degradation with non-selectivity. However, the traditional Fenton reaction is limited by the sluggish regeneration of Fe2+, resulting in a slower reaction rate, and it is necessary to further increase the dosage of Fe2+, which will increase the production of iron sludge. Activated carbon (AC) has a strong adsorption property, and it cannot be ignored that it also can reduce Fe3+. In this study, the degradation of acid red G (ARG) by adding AC to the Fe3+/H2O2 system, the role of the reducing ability, and the reason why AC can reduce Fe3+ were studied. By adding three kinds of ACs, including coconut shell-activated carbon (CSPAC), wood-activated carbon (WPAC), and coal-activated carbon (CPAC), the ability of ACs to assist the Fe3+/H2O2 Fenton-like system to degrade ARG was clarified. Through the final treatment effect and the ability to reduce Fe3+, the type of AC with the best promotion effect was CSPAC. The different influence factors of particle size, the concentration of CSPAC, concentration of H2O2, concentration of Fe3+, and pH value were further observed. The best reaction conditions were determined as CSPAC powder with a particle size of 75 μm and dosage of 0.6 g/L, initial H2O2 concentration of 0.4 mmol/L, Fe3+ concentration of 0.1 mmol/L, and pH = 3. By reducing the adsorption effect of CSPAC, it was further observed that CSPAC could accelerate the early reaction rate of the degradation process of ARG by the Fe3+/H2O2 system. FT-IR and XPS confirmed that the C-O-H group on the surface of CSPAC could reduce Fe3+ to Fe2+. This study can improve the understanding and role of AC in the Fenton reaction, and further promote the application of the Fenton reaction in sewage treatment.

O- and F-doped porous carbon bifunctional catalyst derived from polyvinylidene fluoride for sulfamerazine removal in the metal-free electro-Fenton process

Heteroatom-doped carbon materials can effectively activate H₂O₂ into •OH during the metal-free electro-Fenton (EF) process. However, information on bifunctional catalysts for the simultaneous generation and activation of H₂O₂ is scarce. In this study, O- and F-doped porous carbon cathode materials (PPCs) were prepared by the direct carbonization of polyvinylidene fluoride (PVDF) for sulfamerazine (SMR) removal in a metal-free EF process. The porous structure and chemical composition of the PPCs were regulated by the carbonization temperature. PPC-6 (carbonized at 600 °C) exhibited optimal electrocatalytic performance in terms of electrochemical H₂O₂ generation and activation owing to its high specific surface area, mesoporous structure, and optimum fractions of doped O and F. Excellent performance of the 2e^- oxygen reduction reaction was found with an H₂O₂ selectivity of 93.5% and an average electron transfer number of 2.13. An H₂O₂ accumulative concentration of 103.9 mg/L and an SMR removal efficiency of 90.1% were achieved during the metal-free EF process. PPC-6 was able to stably remove SMR over five consecutive cycles, retaining 92.6% of its original performance. Quantitative structure-activity relationship analysis revealed that doped oxygen functional groups contributed substantially to H₂O₂ generation, and semi-ionic C-F bonds with high electronegativity were the cause of the activation of H₂O₂ to •OH. These findings suggest that the PVDF-derived carbonaceous catalysts are feasible and desirable for metal-free EF processes.

Fe-Immobilised Catechol-Based Hypercrosslinked Polymer as Heterogeneous Fenton Catalyst for Degradation of Methylene Blue in Water

Clean water is one of the sustainable development goals. Organic dye is one of the water pollutants affecting water quality. Hence, the conversion of dyes to safer species is crucial for water treatment. The Fenton reaction using Fe as a catalyst is a promising process. However, homogeneous catalysts are normally sensitive, difficult to separate, and burdensome to reuse. Therefore, a catechol-based hypercrosslinked polymer (catechol-HCP) was developed as an inexpensive solid support for Fe (catechol-HCP-Fe) and applied as a heterogenous Fenton catalyst. The good interaction of the catechol moiety with Fe, as well as the porous structure, simple preparation, low cost, and high stability of catechol-HCP, make it beneficial for Fe-loading in the polymer and Fenton reaction utilisation. The catechol-HCP-Fe demonstrated good catalytic activity for methylene blue (MB) degradation in a neutral pH. Complete decolouration of 100 ppm MB could be observed within 25 min. The rate of reaction was influenced by H₂O₂ concentration, polymer dose, MB concentration, pH, and temperature. The catechol-HCP-Fe could be reused for at least four cycles. The dominant reactive species of the reaction was considered to be singlet oxygen (¹O₂), and the plausible mechanism of the reaction was proposed.

Polyaniline derived carbon membrane and its in-situ membrane fouling mitigation performance in MBR based on metal-free electro-Fenton

An electro-enhanced membrane bioreactor (EMBR) was constructed with polyaniline-based carbon (PAC) separation membrane as the membrane-electrode, which could realize the in-situ electro-generation and activation of H₂O₂ to ·OH depending on the graphitic and pyridinic N as active sites without metal catalyst. After the continuous operation of the bioreactor for 74 days, approximately 77.41% irreversible membrane fouling occurred on the electrochemically enhanced membrane, which was less than that on the control membrane (85.96%). The ·OH oxidation combined with electrostatic barrier formed by -1.0 V enhanced PAC membrane suppressed the extracellular polymeric substances deposition on membrane. After operation, the strength of total cell, proteins, β-polysaccharides and α-polysaccharides on the membrane without bias were 5.17, 4.32, 9.65 and 16.31, respectively. In EMBR, the corresponding strength were 2.03, 3.35, 2.15 and 6.73. After calculation, the unblocked pores accounted for 35.3% and 78.5% of the total membrane surface in MBR and EMBR, respectively, indicating the fouling was alleviated obviously. Meanwhile, the EMBR owned a satisfactory wastewater treatment effect with average effluent chemical oxygen demand and NH₄⁺-N around 18.98 mg/L and 0.68 mg/L. The successful implementation of this strategy achieved a green and metal-free method for ·OH production with electrochemical effect for membrane fouling control in MBR.

Comparative Experimental and Computational Studies of Hydroxyl and Sulfate Radical-Mediated Degradation of Simple and Complex Organic Substrates

Persulfate (PS)-based advanced oxidation processes (AOPs) have been promoted as alternatives to H₂O₂-based AOPs. To gauge the potential of this technology, the PS/Fe(II) and Fenton (H₂O₂/Fe(II)) processes were comparatively evaluated using formate as a simple target compound and nanofiltration concentrate from a municipal wastewater treatment plant as a complex suite of contaminants with the aid of kinetic modeling. In terms of the short-term rate and extent of mineralization of formate and the nanofiltration concentrate, PS/Fe(II) is less effective due to slow Fe(II)/Fe(III) cycling attributable to the scavenging of superoxide by PS. However, in the concentrate treatment, PS/Fe(II) provided a sustained removal of total organic carbon (TOC), with ∼81% removed after 7 days with SO₄^•- consistently produced via homolysis of the long-life PS. In comparison, H₂O₂/Fe(II) exhibited limited TOC removal over ∼57% after 10 h due to the futile consumption of H₂O₂ by HO^•. PS/Fe(II) also offers better performance at transforming humic-like moieties to more biodegradable compounds as a result of chlorine radicals formed by the reaction of SO₄^•- with the matrix constituents present in the concentrate. The application of PS/Fe(II) is, however, subject to the limitations of slow oxidation of organic contaminants, release of sulfate, and formation of chlorinated byproducts.

Limitations and future directions of application of the Fenton-like process in micropollutants degradation in water and wastewater treatment: A critical review

Growing water scarcity and pollution are the main challenges that scientists need to focus on currently. Fenton-like processes are promising for applications related to water and wastewater treatment. Although there have been reviews on the fundamentals and applications of Fenton oxidation, a review focusing on the limitations of Fenton oxidation and their possible solutions is still insufficient. This review summarises the features, advantages, and drawbacks of the classic Fenton process. A comprehensive literature survey was conducted to review studies conducted over the last few decades dealing with the application of Fenton processes to organic pollutant removal from water and wastewater. The present overview highlights the modifications of Fenton processes focusing on industrial applications in water and wastewater treatment, especially for micropollutant degradation. Additionally, this study reviews the possibilities and future directions of research on Fenton-like processes to enable the incorporation of Fenton-based methods into existing water and wastewater treatment technologies, including industrial wastewater. It also presents a novel technological solution and improvements to the Fenton-like process to improve the efficiency and reduce the cost.

Research Trends on Pillared Interlayered Clays (PILCs) Used as Catalysts in Environmental and Chemical Processes: Bibliometric Analysis

Over the last four decades, a large number of studies have been published on pillared interlayered clays (PILCs) used as adsorbent materials and catalysts or supports for transition metals in heterogeneous catalysis. Particularly, PILCs have been used for water treatment through advanced oxidation processes (AOPs) to remove organic pollutants. They have also been studied in various chemical and environmental processes. Because of the growing interest in PILCs, this article is focused on analyzing scientific publications such as research/review articles and book chapters from the last four decades (from 1980 to 2019) through a bibliometric analysis (BA) to visualize and describe research trends on PILCs. By narrowing the bibliographic search to titles, keywords, and abstracts of publications related to PILCs, using Scopus and Web of Science (WoS) (the two scientific databases), a total of 3425 documents have been retrieved. The bibliometric dataset was analyzed by VantagePoint^®. The main research trends identified in the last four decades were the use of PILCs in environmental processes (34.4% of total publications) along with chemical processes (petrochemical reactions 17.5%, SCR NOx 10.8%, and decomposition 8.2%). In environmental processes, PILCs have been used in photo-oxidation (32%), CWPO (21.1%), and heterogeneous catalysis (19.4%). Phenols, dyes, and VOCs have been the main pollutants studied using PILCs as catalysts. Fe, Ti, Zr, Cu, and Co are the most supported active phases in PILCs. Other research trends grouped by characterization techniques, countries, research areas, institutes, scientific journals that have published the most on this topic, number of publications per 5-year period, and most frequently used keywords through the last four decades have been identified. It was determined that the number of publications on PILCs has increased since 1980 and the countries with the highest number of publications are China, Spain, and The United States of America.

Sustainable biochar/MgFe2O4 adsorbent for levofloxacin removal: Adsorption performances and mechanisms

The limitation of low efficiency and complicated separation after adsorption make the practical application of biochar a huge challenge. Here, one pomelo peel-derived magnetic biochar composite, biochar supported MgFe₂O₄ (BMF) was fabricated and adopted for Levofloxacin (LFX) adsorption. Adsorption behaviors and mechanisms were investigated by characterization analysis, batch experiments, and data modeling. Results indicated that adsorption could be strikingly influenced by pyrolysis temperature. Adsorption kinetic was well fitted by pseudo-second-order model. Adsorption isotherm was best fitted with Freundlich model. The maximum adsorption capacity was 115 mg g^-1. Moreover, hydrophobic effect played a limited contribution according to dual-mode model analysis. LFX adsorption was spontaneous and endothermic. Adsorption mechanisms were ascribed to electrostatic interactions, H-bonding, functional groups complexation, and π-π electron donor-acceptor interactions. Besides that, BMF had the potential for repeated use. This research proposed a novel and promising method for LFX or other antibiotics adsorption removal.

Synthesis of Template-Free Iron Oxyhydroxide Nanorods for Sunlight-Driven Photo-Fenton Catalysis

Designing a photocatalyst with high efficiency using semiconductor materials emerges as a promising approach for the treatment of wastewater. At the same time, it is very essential to develop nondestructive, green, and sustainable techniques for the degradation of refractory pollutants. Here, we have demonstrated a facile route to prepare iron oxyhydroxide nanorods (β-FeOOH) without employment of any templating agent via a light-driven solution chemistry pathway and explored the as-prepared nanorods as the photo-Fenton catalyst under solar light irradiation. The photocatalytic experiments were performed toward the degradation of the aqueous solution of two different pollutants, namely, methylene blue and rhodamine B dyes. We have illustrated the effect of pH of the solution together with the concentration of H₂O₂ during the degradation process and optimized the solution pH as well as the H₂O₂ concentration. The superb photocatalytic efficiency of β-FeOOH is attributed to the generation of reactive oxygen species in the presence of solar light, and these photo-produced reactive oxygen species assist the degradation process. The excellent photocatalytic efficacy and sustainability of β-FeOOH nanorods along with their effortless synthesis approach point to a cost-effective and environmentally benign pathway in fabricating a highly active photocatalyst for the degradation of organic dyes.

Ionic Effects in Ionic Diffusiophoresis in Chemically Driven Active Colloids

We study experimentally the effect of added salt in the phoretic motion of chemically driven colloidal particles. We show that the response of passive colloids to a fixed active colloid, be it attractive or repulsive, depends on the ionic strength, the ζ potential, and the size of the passive colloids. We further report that the direction of self-propulsion of Janus colloids can be reversed by decreasing their ζ potential below a critical value. By constructing an effective model that treats the colloid and ions as a whole subjected to the concentration field of generated ions and takes into account the joint effect of both generated and background ions in determining the Debye length, we demonstrate that the response of the passive colloids and the velocity of the Janus colloids can be quantitatively captured by this model under the ionic diffusiophoresis theory beyond the infinitely-thin-double-layer limit.

Oxidative Degradation of Tetracycline by Magnetite and Persulfate: Performance, Water Matrix Effect, and Reaction Mechanism

This study presents a strategy to remove tetracycline by using magnetite-activated persulfate. Magnetite (Fe3O4) was synthesized at high purity levels-as established via X-ray diffractometry, transmission electron microscopy, and N2 sorption analyses-and tetracycline was degraded within 60 min in the presence of both magnetite and persulfate (K2S2O8), while the use of either substance yielded limited degradation efficiency. The effects of magnetite and persulfate dosage, the initial concentration of tetracycline, and the initial pH on the oxidative degradation of tetracycline were interrogated. The results demonstrate that the efficiency of tetracycline removal increased in line with magnetite and persulfate dosage. However, the reaction rate increased only when increasing the magnetite dosage, not the persulfate dosage. This finding indicates that magnetite serves as a catalyst in converting persulfate species into sulfate radicals. Acidic conditions were favorable for tetracycline degradation. Moreover, the effects of using a water matrix were investigated by using wastewater treatment plant effluent. Comparably lower removal efficiencies were obtained in the effluent than in ultrapure water, most likely due to competitive reactions among the organic and inorganic species in the effluent. Increased concentrations of persulfate also enhanced removal efficiency in the effluent. The tetracycline degradation pathway through the magnetite/persulfate system was identified by using a liquid chromatograph-tandem mass spectrometer. Overall, this study demonstrates that heterogeneous Fenton reactions when using a mixture of magnetite and persulfate have a high potential to control micropollutants in wastewater.

Simultaneous Galvanic Generation of Fe2+ Catalyst and Spontaneous Energy Release in the Galvano-Fenton Technique: A Numerical Investigation of Phenol’s Oxidation and Energy Production and Saving

The present paper investigates the potential of the Galvano-Fenton process as an advanced technique in terms of the simultaneous oxidation of a model pollutant, phenol, and the energy release and saving as compared to conventional electrochemical techniques, namely, Fenton, Fenton-like, and Electro-Fenton. A numerical model describing the electrochemical, electrolytic, and phenol’s mineralization reactions is presented. Simulations are conducted to predict the kinetics of ferrous and ferric ions, radicals’ formation, and phenol degradation along with released power. Parametric analysis and comparisons are also performed between the basic configuration of the Galvano-Fenton process and its upgraded version integrating a pre-immersion stage of the electrodes in the electrolyte equivalent to 25% of the total experiment’s duration. The ratio of the initial concentration of H2O2 to the concentration of the released/added Fe2+ catalyst is varied from 10 to 30. The effect of phenol concentration is inspected over the range of 0.188 to 10 mg/L as well. Compared to conventional Fenton-based techniques, the Galvano-Fenton process demonstrated a higher performance by reaching 1.34% of degradation efficiency per released J. This is associated with the generation of hydroxyl radicals of 0.047 nM/released J with initial concentrations of hydrogen peroxide and phenol of 0.187 mM and 2 µM, respectively. Moreover, the integration of the pre-immersion stage allowed the overcoming the barrier of the null degradation rate at the initial instant.

Synergetic adsorption and photo-Fenton degradation of methylene blue by ZnFe2O4/SiO2 magnetic double-mesoporous-shelled hollow spheres

Adsorption and Fenton technologies have been widely employed to deal with wastewater. ZnFe₂O₄/SiO₂ magnetic double-mesoporous-shelled hollow spheres (MDSHSs) were feasibly synthesized by a solvothermal method. The as-synthesized MDSHSs show excellent adsorption and selectivity for methylene blue (MB), which it took about only 1 min to reach the adsorption equilibrium. About 50% MB was removed by adsorption, and other 50% MB was degraded under further photo-Fenton process. Effects of experimental conditions on the adsorption and photo-Fenton process were investigated. The mechanisms of MDSHSs formation and photo-Fenton process were proposed. Total organic carbon (TOC) reduction reached as high as 90% with 60 mg/L of MB for 90 min. The experimental results indicated that MDSHSs exhibit a remarkable adsorption and catalytic activity for photo-Fenton process in a wide pH range of 3.3-11.0. Simultaneously, the composite shows an excellent stability and reusability.

A comparison study of applying natural iron minerals and zero-valent metals as Fenton-like catalysts for the removal of imidacloprid

Natural iron minerals and zero-valent metals have been widely tested as catalysts for the Fenton-like process, but the systematical comparison study about their catalytic performance was rarely conducted, and the risk of the secondary pollution of toxic heavy metals was still not uncertain. In this paper, a comparison study of applying pyrite, ilmenite, vanadium titano-magnetite (VTM), zero-valent iron (ZVI), and zero-valent copper (ZVC) as Fenton-like catalysts for the removal of imidacloprid was performed. The results showed that ZVI exhibited the highest activity among the recyclable solid catalysts with a removal rate of 96.8% at initial pH 3 using 10.78 mmol/L H₂O₂, due to iron corrosive dissolution. Vanadium titano-magnetite (VTM) exhibited the best activity at first use among tested minerals but with low reusability. Pyrite with stable morphology showed a medium but sustainable ability to degrade imidacloprid, achieving a removal rate of 10.5% in the fifth use. The reaction much favored the acidic condition of initial pH around 2 or 3. Meanwhile, there was a significant positive correlation between removal efficiency and dissolved Fe or Cu concentration. Pyrite was considered to be a promising catalyst in Fenton-like reaction. It was suggested that the system proceeded predominantly through a homogeneous route via dissolved Fe or Cu ions. Except ZVC and VTM, other tested catalysts showed the low possibility of causing secondary pollution of toxic metals in the application of Fenton-like process.

Enhancing iron redox cycling for promoting heterogeneous Fenton performance: A review

Conventional water treatment methods are difficult to remove stubborn pollutants emerging from surface water. Advanced oxidation processes (AOPs) can achieve a higher level of mineralization of stubborn pollutants. In recent years, the Fenton process for the degradation of pollutants as one of the most efficient ways has received more and more attention. While homogeneous catalysis is easy to produce sludge and the catalyst cannot be cycled. In contrast, heterogeneous Fenton-like reaction can get over these drawbacks and be used in a wider range. However, the reduction of Fe (III) to Fe(II) by hydrogen peroxide (H₂O₂) is still the speed limit step when generating reactive oxygen species (ROS) in heterogeneous Fenton system, which restricts the efficiency of the catalyst to degrade pollutants. Based on previous research, this article reviews the strategies to improve the iron redox cycle in heterogeneous Fenton system catalyzed by iron materials. Including introducing semiconductor, the modification with other elements, the application of carbon materials as carriers, the introduction of metal sulfides as co-catalysts, and the direct reduction with reducing substances. In addition, we also pay special attention to the influence of the inherent properties of iron materials on accelerating the iron redox cycle. We look forward that the strategy outlined in this article can provide readers with inspiration for constructing an efficient heterogeneous Fenton system.

Degradation of metoprolol from wastewater in a bio-electro-Fenton system

Advanced oxidation processes (AOPs) have been intensely studied for the removal of refractory pollutants because of the strong oxidizing capacity of hydroxyl radical. One of the emerging AOP methods gaining increased attention is bio-electro-Fenton (BEF) which can generate hydroxyl radical in-situ in the cathode chamber using the energy harvested by exoelectrogenic bacteria in the anode. In this study, the feasibility of BEF technology for the removal of metoprolol, a typical micropollutant widely found in the water environment, was for the first time investigated. It was found that applied voltage and working pH had a significant effect on removal efficiency while Fe²⁺ dosage as catalyst showed a little effect. Besides removal by hydroxyl radical, metoprolol might be adsorbed on the surface of the reactor, electrode, and precipitated with iron sludge, especially at neutral pH. In a batch experiment with a supplied voltage of 0.2 V, pH 3, and a Fe²⁺ dose of 0.2 mM, the removal rate of metoprolol in the BEF for the synthetic wastewater and the real effluent from the secondary sediment tank was 66% and 55% within 12 h, respectively. A possible degradation pathway was proposed. Then the removal of metoprolol in a continuous flow BEF system was further studied at different hydraulic retention times (HRTs) of 2, 4, and 6 h, about 77%, 92%, and 95% removal was observed. A toxicity test (less than 20% inhibition on bioluminescence) during treatment and energy cost analysis (5.269 × 10^-3 kWh/order/m³) in treating 10 μg/L of metoprolol containing wastewater effluent at continuous flow mode implied that the proposed BEF has a potential for wastewater treatment.

Degradation of fluoroquinolones in homogeneous and heterogeneous photo-Fenton processes: A review

Fluoroquinolone antibiotics are frequently detected in the environment causing potential hazards to ecological and human health. Inadequate removal efficiencies were reported for fluoroquinolones during conventional wastewater treatment processes whereas the application of photo-Fenton reactions has attracted much attention due to their high reaction rate. This article summarizes the recent proceedings on homogeneous and heterogeneous photo-Fenton degradation of fluoroquinolones. Degradation efficiencies of fluoroquinolones were discussed as well as rate constants for a distinct comparison. The influences of initial fluoroquinolone concentration, H₂O₂, Fe²⁺, pH and temperature were also investigated on homogeneous photo-Fenton degradation of fluoroquinolones. The currently applied heterogenous catalysts were considered including iron oxides catalysts, iron-based composite catalysts and iron-based semiconductor. In addition, the degradation pathways for typical fluoroquinolones were proposed with the products identified in the literature. The results indicated the better performance with the aid of heterogeneous catalysts due to the generation of more active species. Intermediate products at smaller molecular weight were obtained through various types of pathways under heterogeneous photo-Fenton degradation of fluoroquinolones, implying a practical application with biological treatment processes for fully mineralization.

In-situ synthesis of CuS@carbon nanocomposites and application in enhanced photo-fenton degradation of 2,4-DCP

Novel CuS nanoparticles embedded into carbon nanosheets (CuS@CNs) were prepared in situ by applying wheat straw cellulose/feather protein hydrogel beads as templates and were used to photocatalytically activate H₂O₂ to degrade 2,4-dichlorphenol (2,4-DCP). The photo-Fenton catalytic properties of the nanocomposite catalysts obtained under different synthetic conditions, including different Cu²⁺ concentrations, S^2- concentrations and calcination temperatures, were evaluated. The results showed that CuS@CNs with 0.1 M Cu²⁺, 0.1 M S^2- at 800 °C presented excellent photo-Fenton degradation performance for 2,4-DCP (25 mg/L) in the presence of H₂O₂ and could remove 90% of 2,4-DCP in 2.5 h. The water quality parameters (pH, Cl^-, HCO₃^-, H₂PO₄^- and SO₄^2-) exhibited different effects on the photocatalytic degradation process. The catalytic activity of the CuS@CNs used in the cycle could be recovered after thermal regeneration. Radical quenching and electron paramagnetic resonance (EPR) experiments confirmed that ·OH species were main active radicals contributing to the degradation of 2,4-DCP. The photocatalytic mechanism of CuS@CNs was also explored by photoelectrochemical (PEC) measurements and UV-vis diffuse reflectance spectroscopy (DRS). Incorporation of carbon nanosheets could significantly improve the separation of photogenerated charge carriers to stimulate pollutant degradation by CuS. Based on the detected intermediates, the degradation pathway of 2,4-DCP in the CuS@CNs/H₂O₂ reaction system was also proposed.

A novel biodegradable injectable chitosan hydrogel for overcoming postoperative trauma and combating multiple tumors

Wound bacterial infections and tumor recurrence are the main reasons for the poor prognosis after primary tumor resection. Here, we fabricated a novel therapeutic nanocomposite using chitosan (CS) hydrogel combined with black phosphate nanosheets (BPNSs) and in situ grown copper nanoparticles (CuNPs). The obtained hydrogel (CS@BPNSs@CuNPs), possessing a remarkable temperature-sensitive spongy-like state, offered 24.98 % blood clotting index. The released BPNSs@CuNPs could produce reactive oxygen species (ROS) to kill infected invasive bacteria (98.1 %) and inhibit local residual tumor cell regeneration (11.3 %). Moreover, by coupling the photothermal properties of BPNSs, the BPNSs@CuNPs showed 19.6 % penetration rate to cross the blood tumor barrier (BTB) for treating brain tumors. The hydrogel platform was further combined with aPD-L1-based immunotherapy to employ its synergetic therapeutic effect in the prevention of tumors. The in vivo studies showed that biodegradable hydrogel could hold a great potential as a novel strategy for improving postoperative therapy and multi-tumor treatments.

Carbonaceous cathode materials for electro-Fenton technology: Mechanism, kinetics, recent advances, opportunities and challenges

Electro-Fenton (EF) technique has gained significant attention in recent years owing to its high efficiency and environmental compatibility for the degradation of organic pollutants and contaminants of emerging concern (CECs). The efficiency of an EF reaction relies primarily on the formation of hydrogen peroxide (H₂O₂) via 2e^─ oxygen reduction reaction (ORR) and the generation of hydroxyl radicals (^●OH). This could be achieved through an efficient cathode material which operates over a wide pH range (pH 3-9). Herein, the current progresses on the advancements of carbonaceous cathode materials for EF reactions are comprehensively reviewed. The insights of various materials such as, activated carbon fibres (ACFs), carbon/graphite felt (CF/GF), carbon nanotubes (CNTs), graphene, carbon aerogels (CAs), ordered mesoporous carbon (OMCs), etc. are discussed inclusively. Transition metals and hetero atoms were used as dopants to enhance the efficiency of homogeneous and heterogeneous EF reactions. Iron-functionalized cathodes widened the working pH window (pH 1-9) and limited the energy consumption. The mechanism, reactor configuration, and kinetic models, are explained. Techno economic analysis of the EF reaction revealed that the anode and the raw materials contributed significantly to the overall cost. It is concluded that most reactions follow pseudo-first order kinetics and rotating cathodes provide the best H₂O₂ production efficiency in lab scale. The challenges, future prospects and commercialization of EF reaction for wastewater treatment are also discussed.

A Computational Approach to Incorporate Metabolite Inhibition in the Growth Kinetics of Indigenous Bacterial Strain Bacillus subtilis MN372379 in the Treatment of Wastewater Containing Congo Red Dye

A rigorous knowledge of the bacterial growth kinetics is essential for the scaling-up and optimization of biodegradation process conditions in a bioreactor. Although a great deal of literature is available on the modeling of bacterial growth kinetics considering the inhibition at high substrate-loading, the inhibition caused by toxic metabolic byproducts was not accounted in the bacterial growth kinetics. This work primarily aimed at developing a parametric bacterial growth model to account for metabolite inhibition, indicated by a decelerating log-phase growth, which was rarely discussed in the previous studies. An efficient azo-dye degrading bacterium (Bacillus subtilis MN372379) was isolated from the sludge-waste nearby a carpet-dyeing unit. The isolated bacterial strain was used to decolorize the simulated wastewater containing Congo red dye. This study proposed a computational approach to calculate specific bacterial growth rate time-averaged over the entire sigmoidal log phase (including the decelerating phase) for incorporating the effect of metabolite-inhibition, in contrast to the conventional studies where only the initial part (accelerating) of log phase was considered. The nature of metabolite inhibition was also determined and found to be non-competitive. Next, the computed time-averaged specific bacterial growth rate was incorporated into three substrate inhibition models to account for both, the metabolite and substrate inhibitions, and subsequently their kinetic parameters were also determined. Finally, the initial dye concentration and inoculum size were optimized to yield maximum dye utilization rate. This study paves the way for predicting bacterial growth kinetic with improved accuracy to enable a better optimization of bioreactors at the industrial scale.

Heterogeneous Fenton catalysts: A review of recent advances

Heterogeneous Fenton catalysts are emerging as excellent materials for applications related to water purification. In this review, recent trends in the synthesis and application of heterogeneous Fenton catalysts for the abatement of organic pollutants and disinfection of microorganisms are discussed. It is noted that as the complexity of cell wall increases, the resistance level towards various disinfectants increases and it requires either harsh conditions or longer exposure time for the complete disinfection. In case of viruses, enveloped viruses (e.g. SARS-CoV-2) are found to be more susceptible to disinfectants than the non-enveloped viruses. The introduction of plasmonic materials with the Fenton catalysts broadens the visible light absorption efficiency of the hybrid material, and incorporation of semiconductor material improves the rate of regeneration of Fe(II) from Fe(III). A special emphasis is given to the use of Fenton catalysts for antibacterial applications. Composite materials of magnetite and ferrites remain a champion in this area because of their easy separation and reuse, owing to their magnetic properties. Iron minerals supported on clay materials, perovskites, carbon materials, zeolites and metal-organic frameworks (MOFs) dramatically increase the catalytic degradation rate of contaminants by providing high surface area, good mechanical stability, and improved electron transfer. Moreover, insights to the zero-valent iron and its capacity to remove a wide range of organic pollutants, heavy metals and bacterial contamination are also discussed. Real world applications and the role of natural organic matter are summarised. Parameter optimisation (e.g. light source, dosage of catalyst, concentration of H2O2 etc.), sustainable models for the reusability or recyclability of the catalyst and the theoretical understanding and mechanistic aspects of the photo-Fenton process are also explained. Additionally, this review summarises the opportunities and future directions of research in the heterogeneous Fenton catalysis.

Oxidation of pollutants via an electro-Fenton-like process in aqueous media using iron–zeolite modified electrodes

Eco-friendly modified electrodes based on zeolites are applied for electro-Fenton dye oxidation without the addition of H₂O₂ at room temperature.

Design and application of metal-organic frameworks and derivatives as heterogeneous Fenton-like catalysts for organic wastewater treatment: A review

Advanced oxidation process (AOP), with a high oxidation efficiency, fast reaction speed (relatively no secondary pollution), has become one of the core technologies of industrial wastewater and advanced drinking water treatment. Heterogeneous Fenton-like oxidation process (HFOP) is a kind of AOP, which developed rapidly in recent years in such a way to overcome the disadvantages of traditional Fenton reaction. Metal-organic frameworks (MOFs) and their derivatives become essential heterogeneous catalysts for organics mineralization due to the large specific surface area, abundant active sites, and ease of structural regulation. However, the knowledge gap on the mechanism and the fate of heterogeneous catalyst species during organics degradation activities by MOFs presents considerable impediments, particularly for a wide application and scaling up the process. This work has the potential to provide guidance and ideas for researchers and engineers in the fields of environmental remediation, environmental catalysis and functional materials. This review focuses on clarifying the critical mechanism of •OH production from MOFs and derivatives as well as its action on the organic's degradation process. The recent developments in MOF based HFOP are compared, and more attention is paid for the following aspects in this review: (1) classifies systematically progressive modification methods of MOFs by chemical and physical treatments; (2) analyzes the fate of catalytic species during treating organic wastewater; (3) proposes design ideas and principles for improving the performance of MOFs catalysts; (4) discusses the main factors influencing the catalytic properties and practical application; (5) summarizes the possible research challenges and directions for MOFs and their derivatives as catalysts applied to wastewater treatment in the future.

A comprehensive review on the integration of advanced oxidation processes with biodegradation for the treatment of textile wastewater containing azo dyes

The threat of dye contamination has achieved an unsurpassed abnormal state lately due to their massive consumption in several enterprises including textile, leather, cosmetic, plastic, and paper industries. This review focuses on the integrations of various advanced oxidation processes (AOPs), such as Fenton, photocatalysis, and ozonation, with biodegradation for the treatment of textile azo dyes. Such integrations have been explored lately by researchers to bring down the processing cost and improve the degree of mineralization of the treated dyeing wastewater. The review refers to the basic mechanisms, the influence of various process parameters, outcomes of recent works, and future research directions. All the three AOPs, independently, demonstrated substantial color reduction of 54–100%. The ozonation process, stand-alone, showed the most efficient decolorization (of 88–100%) consistently in all reviewed research works. In contrast, all three AOPs independently offered varied and inadequate COD reduction in the range of 16–80%. The AOPs, after getting integrated with biodegradation, yielded an additional reduction (of 11–70%) in the COD-levels and (of 16–80%) in the TOC-levels. Further, the integration of AOPs with biodegradation has potential to significantly reduce the treatment costs. The review suggests further research efforts in the direction of sequencing chemical and biological routes such that their synergistic utilization yield complete detoxification of the textile azo dyes economically at large-scale.

A High-Efficient Carbon-Coated Iron-Based Fenton-Like Catalyst with Enhanced Cycle Stability and Regenerative Performance

Carbon coated iron-based Fenton-like catalysts are now widely studied in wastewater treatment. However, their poor stability is still a big challenge and the related regenerative performance is seldom investigated. Herein, a carbon-coated Fe3O4 on carbon cloth (cc/Fe3O4@C) was prepared with glucose as carbon source via electrodeposition and ethanol solvothermal methods. An amorphous carbon layer with polar C-groups covers the surface of Fe3O4, which presents a flaky cross-linked network structure on the carbon cloth (cc). The cc/Fe3O4@C exhibits an improved catalytic activity with nearly 84% phenol was removed within 35 min with polar C-groups. What’s more, around 80% phenol can still be degraded in 120 min after 14 degradation cycles. After the regeneration treatment, the degradation performance was restored to the level of the fresh in the first two regenerations. The enhanced cycle stability and regeneration performance of the catalyst are as follows: Firstly, the catalyst’s composition and structure were recovered; Secondly, the reduction effect of the amorphous carbon layer ensuring timely supplement of Fe2+ from Fe3+. Also, the carbon layer reduces Fe leaching during the Fenton-like process.

Supported metal and metal oxide particles with proximity effect for catalysis

External influence is essential for any change to occur in this world. Similarly, the reaction path of a chemical reaction can be changed with the addition of a catalyst from outside. Sometimes a catalyst performs better when it remains associated with an inert substance, which is called a support material (SM). Improved catalyst accomplishment arises from the 'proximity effect'. Even inert supports play a role in better product formulation or environmental remediation. In this review, it has been shown how the SM, as a nest, aids the catalyst particle synergistically to perform a good job in a chemical reaction. The structure-function relationship of SM helps in catalyst activation to some extent, and produces active centres that are difficult to fully ascertain. In the text, Langmuir-Hinshelwood (L-H), Mars-van Krevelen (MVK), and Eley-Rideal (E-R) mechanisms are highlighted for the adsorption processes as the case may be. Again, the importance of SM for both catalyst and substrates has been consolidated here in the text. Finally, the role of the initiator and the promoter is also discussed in this review.