Single neuron capture and axonal development in three-dimensional microscale hydrogels

Engineered neural circuits for modeling brain physiology and neuropathology

The neural circuits of the central nervous system are the regulatory pathways for feeling, motion control, learning, and memory, and their dysfunction is closely related to various neurodegenerative diseases. Despite the growing demand for the unraveling of the physiology and functional connectivity of the neural circuits, their fundamental investigation is hampered because of the inability to access the components of neural circuits and the complex microenvironment. As an alternative approach, in vitro human neural circuits show principles of in vivo human neuronal circuit function. They allow access to the cellular compartment and permit real-time monitoring of neural circuits. In this review, we summarize recent advances in reconstituted in vitro neural circuits using engineering techniques. To this end, we provide an overview of the fabrication techniques and methods for stimulation and measurement of in vitro neural circuits. Subsequently, representative examples of in vitro neural circuits are reviewed with a particular focus on the recapitulation of structures and functions observed in vivo, and we summarize their application in the study of various brain diseases. We believe that the in vitro neural circuits can help neuroscience and the neuropharmacology. STATEMENT OF SIGNIFICANCE: Despite the growing demand to unravel the physiology and functional connectivity of the neural circuits, the studies on the in vivo neural circuits are frequently limited due to the poor accessibility. Furthermore, single neuron-based analysis has an inherent limitation in that it does not reflect the full spectrum of the neural circuit physiology. As an alternative approach, in vitro engineered neural circuit models have arisen because they can recapitulate the structural and functional characteristics of in vivo neural circuits. These in vitro neural circuits allow the mimicking of dysregulation of the neural circuits, including neurodegenerative diseases and traumatic brain injury. Emerging in vitro engineered neural circuits will provide a better understanding of the (patho-)physiology of neural circuits.

Selective capture of circulating tumor cells by antifouling nanostructure substrate made of hydrogel nanoparticles

The detection and analysis of circulating tumor cells (CTCs) from cancer patients' blood samples present a powerful means to monitor cancer progression. In this work, an antifouling nanostructure substrate made of hydrogel nanoparticles was fabricated for an effective capture of CTCs from the blood samples. The hydrogel nanoparticles were synthesized by zwitterionic sulfobetaine methacrylate (SBMA), methacrylic acid (MAA) and N, N'-methylene bisacrylamide (MBA) through a simple polymerization. SBMA could provide an effective antifouling layer for the substrate to prevent nonspecific cell adhesion, MAA could afford active carboxyl groups for the immobilization of antibody to achieve specific CTC capture, and the nanostructured surface could improve the interaction of the target cells with the antibody modified substrate surface to enhance the capture efficiency of CTCs. Moreover, it was not necessary to further modify the antifouling molecules on the hydrogel nanoparticle substrate's surface, reducing the complexity and difficulty of the substrate preparation. The results showed that about 87 % of target cells (MCF-7 cells) were captured on the antibody modified hydrogel nanoparticle substrate. In contrast, the substrate showed little adhesive capacity for the nonspecific cells (K562 cells), and only 0.15 % of cells were captured. And 98 % of the captured cells kept good cell viability. Finally, 1-32 CTCs/mL were detected from the blood samples of five cancer patients, while no CTC was found in five healthy samples. It is envisaged that the new hydrogel nanostructure substrate is capable of capturing CTCs efficiently and specifically from patient blood samples to be used in cancer treatment.

Layer-By-Layer: The Case for 3D Bioprinting Neurons to Create Patient-Specific Epilepsy Models

The ability to create three-dimensional (3D) models of brain tissue from patient-derived cells, would open new possibilities in studying the neuropathology of disorders such as epilepsy and schizophrenia. While organoid culture has provided impressive examples of patient-specific models, the generation of organised 3D structures remains a challenge. 3D bioprinting is a rapidly developing technology where living cells, encapsulated in suitable bioink matrices, are printed to form 3D structures. 3D bioprinting may provide the capability to organise neuronal populations in 3D, through layer-by-layer deposition, and thereby recapitulate the complexity of neural tissue. However, printing neuron cells raises particular challenges since the biomaterial environment must be of appropriate softness to allow for the neurite extension, properties which are anathema to building self-supporting 3D structures. Here, we review the topic of 3D bioprinting of neurons, including critical discussions of hardware and bio-ink formulation requirements.

3D Printing in Personalized Drug Delivery

Background:

Personalized medicines are becoming more popular as they enable the use of patient’s genomics and hence help in better drug design with fewer side effects. In fact, several doses can be combined into one dosage form which suits the patient’s demography. 3 Dimensional (3D) printing technology for personalized medicine is a modern day treatment method based on genomics of patient.

Methods:

3D printing technology uses digitally controlled devices for formulating API and excipients in a layer by layer pattern for developing a suitable personalized drug delivery system as per the need of patient. It includes various techniques like inkjet printing, fused deposition modelling which can further be classified into continuous inkjet system and drop on demand. In order to formulate such dosage forms, scientists have used various polymers to enhance their acceptance as well as therapeutic efficacy. Polymers like polyvinyl alcohol, poly (lactic acid) (PLA), poly (caprolactone) (PCL) etc can be used during manufacturing.

Results:

Varying number of dosage forms can be produced using 3D printing technology including immediate release tablets, pulsatile release tablets, and transdermal dosage forms etc. The 3D printing technology can be explored successfully to develop personalized medicines which could play a vital role in the treatment of lifethreatening diseases. Particularly, for patients taking multiple medicines, 3D printing method could be explored to design a single dosage in which various drugs can be incorporated. Further 3D printing based personalized drug delivery system could also be investigated in chemotherapy of cancer patients with the added advantage of the reduction in adverse effects.

Conclusion:

In this article, we have reviewed 3D printing technology and its uses in personalized medicine. Further, we also discussed the different techniques and materials used in drug delivery based on 3D printing along with various applications of the technology.

Recent Advances in Engineering the Stem Cell Microniche in 3D

Conventional 2D cell culture techniques have provided fundamental insights into key biochemical and biophysical mechanisms responsible for various cellular behaviors, such as cell adhesion, spreading, division, proliferation, and differentiation. However, 2D culture in vitro does not fully capture the physical and chemical properties of the native microenvironment. There is a growing body of research that suggests that cells cultured on 2D substrates differ greatly from those grown in vivo. This article focuses on recent progress in using bioinspired 3D matrices that recapitulate as many aspects of the natural extracellular matrix as possible. A range of techniques for the engineering of 3D microenvironment with precisely controlled biophysical and chemical properties, and the impact of these environments on cellular behavior, is reviewed. Finally, an outlook on future challenges for engineering the 3D microenvironment and how such approaches would further our understanding of the influence of the microenvironment on cell function is provided.

Inkjet-Spray Hybrid Printing for 3D Freeform Fabrication of Multilayered Hydrogel Structures

Here, a new bioprinting process by combining drop-on-demand inkjet printing with a spray-coating technique, which enables the high-resolution, high-speed, and freeform fabrication of large-scale cell-laden hydrogel structures is reported. Hydrogel structures with various shapes and composed of different materials, including alginate, cellulose nanofiber, and fibrinogen, are fabricated using the inkjet-spray printing. To manufacture cell-friendly hydrogel structures with controllable stiffness, gelatine methacryloyl is saponified to stabilize jet formation and is subsequently mixed with sodium alginate to prepare blend inks. The hydrogels crosslinked from the blend inks are characterized by assessing physical properties including the microstructure and mechanical stiffness and cellular responses including the cell viability, metabolic activity, and functionality of human dermal fibroblasts within the hydrogel. Cell-laden hydrogel structures are generated on a large scale and collagen type I secretion and spreading of cells within the hydrogels are assessed. The results demonstrate that the inkjet-spray printing system will ensure the formation of a cell-laden hydrogel structure with high shape fidelity in a rapid and reliable manner. Ultimately, the proposed printing technique and the blend bioink to be used to fabricate 3D laminated large-scale tissue equivalents that potentially mimic the function of native tissues is expected.

Tailoring the mechanical properties of gelatin methacryloyl hydrogels through manipulation of the photocrosslinking conditions

Photo-crosslinkable hydrogels, in particular gelatin methacryloyl (GelMa), are gaining increasing importance in biofabrication and tissue engineering. While GelMa is often described as mechanically 'tunable', clear relationships linking the photocrosslinking conditions to reaction rates, and the resulting mechanical properties, have not been described. Meanwhile the conditions employed in the literature are disparate, and difficult to compare. In this work, in situ rheological measurements were used to quantify the relative rate of reaction of GelMa hydrogels with respect to light intensity, exposure time and photo-initiator concentration. In addition the UV degradation of the photo-initiator Irgacure 2959 was measured by UV-vis spectroscopy, and used to estimate the rate of free radical production as a function of light exposure. Using these data an expression was derived which predicts the mechanical properties of GelMa hydrogels produced across a wide range of crosslinking conditions. The model was validated through fabrication of a GelMa gradient which matched predicted properties. Human mesenchymal stem cells encapsulated in crosslinked GelMa exhibited high (>90%) viability post encapsulation, however metabolic activity over one week was influenced by the intensity of light used during crosslinking. The expressions described may be used to aid rational choices of GelMa photocrosslinking conditions, especially in cell encapsulation experiments where minimising the cytotoxic elements in the reaction is a priority.

The effect of electrical stimulation on cortical cells in 3D nanofibrous scaffolds

Cellular behaviors are significantly affected by cellular microenvironment, including mechanical supports, electrical and chemical cues, etc. Three dimensional conductive nanofibers (3D-CNFs) provide the capability to regulate cellular behaviors using mechanical, geometrical and electrical cues together, which are especially important in neural tissue engineering. However, very few studies were conducted to address combined effects of 3D nanofibrous scaffolds and electrical stimulation (ES) on cortical cell cultures. In the present study, polypyrrole (PPy)-coated electrospun polyacrylonitrile (PAN) nanofibers with a 3D structure were successfully prepared for the cortical cell culture, which was compared to cells cultured in the 2D-CNFs meshes, as well as that in the bare PAN nanofibers, both in 2D and 3D. While smooth PAN 3D nanofibers showed dispersive cell distribution, PPy coated 3D-CNFs showed clusters of cortical cells. The combined effects of 3D conductive nanofibers and ES on neurons and glial cells were studied. Different from previous observations on 2D substrates, pulsed electrical stimulations could prevent formation of cell clusters if applied at the beginning of culture, but could not disperse the clusters of cortical cells already formed. Furthermore, the electrical stimulations improved the proliferation of glial cells and accelerate neuron maturation. This study enriched the growing body of evidence for using electrical stimulation and 3D conductive nanofibers to control the culture of cortical cells, which have broad applications in neural engineering, such as implantation, biofunctional in vitro model, etc.

Cellular behaviors are significantly affected by cellular microenvironment, including mechanical supports, electrical and chemical cues, etc.

Functional and Biomimetic Materials for Engineering of the Three-Dimensional Cell Microenvironment

The cell microenvironment has emerged as a key determinant of cell behavior and function in development, physiology, and pathophysiology. The extracellular matrix (ECM) within the cell microenvironment serves not only as a structural foundation for cells but also as a source of three-dimensional (3D) biochemical and biophysical cues that trigger and regulate cell behaviors. Increasing evidence suggests that the 3D character of the microenvironment is required for development of many critical cell responses observed in vivo, fueling a surge in the development of functional and biomimetic materials for engineering the 3D cell microenvironment. Progress in the design of such materials has improved control of cell behaviors in 3D and advanced the fields of tissue regeneration, in vitro tissue models, large-scale cell differentiation, immunotherapy, and gene therapy. However, the field is still in its infancy, and discoveries about the nature of cell-microenvironment interactions continue to overturn much early progress in the field. Key challenges continue to be dissecting the roles of chemistry, structure, mechanics, and electrophysiology in the cell microenvironment, and understanding and harnessing the roles of periodicity and drift in these factors. This review encapsulates where recent advances appear to leave the ever-shifting state of the art, and it highlights areas in which substantial potential and uncertainty remain.

Synthesis, properties, and biomedical applications of gelatin methacryloyl (GelMA) hydrogels

Gelatin methacryloyl (GelMA) hydrogels have been widely used for various biomedical applications due to their suitable biological properties and tunable physical characteristics. GelMA hydrogels closely resemble some essential properties of native extracellular matrix (ECM) due to the presence of cell-attaching and matrix metalloproteinase responsive peptide motifs, which allow cells to proliferate and spread in GelMA-based scaffolds. GelMA is also versatile from a processing perspective. It crosslinks when exposed to light irradiation to form hydrogels with tunable mechanical properties. It can also be microfabricated using different methodologies including micromolding, photomasking, bioprinting, self-assembly, and microfluidic techniques to generate constructs with controlled architectures. Hybrid hydrogel systems can also be formed by mixing GelMA with nanoparticles such as carbon nanotubes and graphene oxide, and other polymers to form networks with desired combined properties and characteristics for specific biological applications. Recent research has demonstrated the proficiency of GelMA-based hydrogels in a wide range of tissue engineering applications including engineering of bone, cartilage, cardiac, and vascular tissues, among others. Other applications of GelMA hydrogels, besides tissue engineering, include fundamental cell research, cell signaling, drug and gene delivery, and bio-sensing.

Enhanced In Vitro Biocompatibility of Chemically Modified Poly(dimethylsiloxane) Surfaces for Stable Adhesion and Long-term Investigation of Brain Cerebral Cortex Cells

Studies on the mammalian brain cerebral cortex have gained increasing importance due to the relevance of the region in controlling critical higher brain functions. Interactions between the cortical cells and surface extracellular matrix (ECM) proteins play a pivotal role in promoting stable cell adhesion, growth, and function. Poly(dimethylsiloxane) (PDMS) based platforms have been increasingly used for on-chip in vitro cellular system analysis. However, the inherent hydrophobicity of the PDMS surface has been unfavorable for any long-term cell system investigations due to transitory physical adsorption of ECM proteins on PDMS surfaces followed by eventual cell dislodgement due to poor anchorage and viability. To address this critical issue, we employed the (3-aminopropyl)triethoxysilane (APTES) based cross-linking strategy to stabilize ECM protein immobilization on PDMS. The efficiency of surface modification in supporting adhesion and long-term viability of neuronal and glial cells was analyzed. The chemically modified surfaces showed a relatively higher cell survival with an increased neurite length and neurite branching. These changes were understood in terms of an increase in surface hydrophilicity, protein stability, and cell-ECM protein interactions. The modification strategy could be successfully applied for stable cortical cell culture on the PDMS microchip for up to 3 weeks in vitro.

Patterning Cellular Alignment through Stretching Hydrogels with Programmable Strain Gradients

The graded mechanical properties (e.g., stiffness and stress/strain) of excellular matrix play an important role in guiding cellular alignment, as vital in tissue reconstruction with proper functions. Though various methods have been developed to engineer a graded mechanical environment to study its effect on cellular behaviors, most of them failed to distinguish stiffness effect from stress/strain effect during mechanical loading. Here, we construct a mechanical environment with programmable strain gradients by using a hydrogel of a linear elastic property. When seeding cells on such hydrogels, we demonstrate that the pattern of cellular alignment can be rather precisely tailored by substrate strains. The experiment is in consistency with a theoritical prediction when assuming that focal adhesions (FAs) would drive a cell to reorient to the directions where they are most stable. A fundamental theory has also been developed and is excellent in agreement with the complete temporal alignment of cells. This work not only provides important insights into the cellular response to the local mechanical microenvironment but can also be utilized to engineer patterned cellular alignment that can be critical in tissue remodeling and regenerative medicine applications.

Frontier microfluidic techniques for short and long-term single cell analysis

Here, we review the frontier microfluidic techniques for single cell analysis (SCA), which is important for research of many biological systems. Microfluidics provides high-throughput, high-resolution experiments at low cost and reagent use, making it especially useful for single cell analysis. Recent advancements in the field have made SCA more feasible, improving device throughput and resolution, adding capabilities, and combining different functions to bring forth new assays. Developments in incubation have allowed for long-term cell tracking assays to be performed with single cell resolution. The ability of systems to provide chemical isolation or prolonged growth of adherent cells is also discussed.

Block-Cell-Printing for live single-cell printing

A unique live-cell printing technique, termed "Block-Cell-Printing" (BloC-Printing), allows for convenient, precise, multiplexed, and high-throughput printing of functional single-cell arrays. Adapted from woodblock printing techniques, the approach employs microfluidic arrays of hook-shaped traps to hold cells at designated positions and directly transfer the anchored cells onto various substrates. BloC-Printing has a minimum turnaround time of 0.5 h, a maximum resolution of 5 µm, close to 100% cell viability, the ability to handle multiple cell types, and efficiently construct protrusion-connected single-cell arrays. The approach enables the large-scale formation of heterotypic cell pairs with controlled morphology and allows for material transport through gap junction intercellular communication. When six types of breast cancer cells are allowed to extend membrane protrusions in the BloC-Printing device for 3 h, multiple biophysical characteristics of cells--including the protrusion percentage, extension rate, and cell length--are easily quantified and found to correlate well with their migration levels. In light of this discovery, BloC-Printing may serve as a rapid and high-throughput cell protrusion characterization tool to measure the invasion and migration capability of cancer cells. Furthermore, primary neurons are also compatible with BloC-Printing.

Engineering physical microenvironment for stem cell based regenerative medicine

Regenerative medicine has rapidly evolved over the past decade owing to its potential applications to improve human health. Targeted differentiations of stem cells promise to regenerate a variety of tissues and/or organs despite significant challenges. Recent studies have demonstrated the vital role of the physical microenvironment in regulating stem cell fate and improving differentiation efficiency. In this review, we summarize the main physical cues that are crucial for controlling stem cell differentiation. Recent advances in the technologies for the construction of physical microenvironment and their implications in controlling stem cell fate are also highlighted.