Tunable stability of monodisperse secondary O/W nano-emulsions

Improving stability and bioavailability of curcumin by quaternized chitosan coated nanoemulsion

This study aims to enhance the stability and bioavailability of curcumin (Cur) using nanoemulsion coating technology. The nanoemulsion system was developed by encapsulating Cur with quaternized chitosan (QMNE), and the nanoemulsion containing Cur and medium-chain triglyceride (MCT) oil (MNE) was used as control sample. The microstructure of the nanoemulsion was examined using Dynamic light scattering (DLS), Transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). The storage, thermal, ionic strength, and pH stability of QMNE were also evaluated, respectively. The results indicate that QMNE demonstrates superior stability, in vitro gastric fluid stability, bioavailability compared to MNE. QMNE exhibits excellent emulsification activity and stability. In addition, QMNE shows significant protection against oxidation in both emulsion systems after different heat treatments. The antimicrobial activity results reveal that QMNE exhibits greater efficacy than that of MNE. Consequently, this study provides valuable insights into the formulation of a system to encapsulate Cur and the improvement of its stability and bioavailability.

Development of a novel oral complex lipid emulsion containing triptolide for targeting pancreatic cancer

Triptolide (TP), a diterpenoid triepoxide, exhibits strong anti-cancer activities, especially against pancreatic cancer, but its clinical application is limited by organ toxicity. TP was combined with diammonium glycyrrhizinate (DG), as a cytoprotective agent, in a novel oral complex lipid emulsion (TP/DG-CLE) to increase the therapeutic index of TP against pancreatic cancer. The emulsion was produced by subjecting phospholipid and active components to high shear conditions using high-pressure homogenization resulting in droplets of essentially neutral or small positive charge and consistent size below 200nm. Pharmacokinetic studies in Sprague Dawley rats revealed an AUC _(0-8h) of TP following oral dosing of TP/DG-CLE that was 4-fold higher than that achieved for triptolide/diammonium glycyrrhizinate suspension, demonstrating significantly higher TP bioavailability and longer residence time in the bloodstream. Tissue distribution data obtained in mice demonstrated that TP/DG-CLE having a TP/DG weight ratio of 1:22.5 preferentially accumulated in the pancreas. Moreover, toxicology assays in rats provided indications of minor liver damage following daily administration of the emulsion for two weeks. Together these studies establish complex lipid emulsions containing triptolide and DG as a promising oral formulation for treatment of pancreatic cancer and establish a platform for developing new chemotherapeutic treatments.

Chitosan-coated nanostructured lipid carriers for transdermal delivery of tetrahydrocurcumin for breast cancer therapy

Chitosan (Ch)-coated nanostructured lipid carriers (NLCs) have great potential for transdermal delivery with high localization of chemotherapeutics in breast cancer. This study used tetrahydrocurcumin (THC), a primary metabolite of curcumin with enhanced antioxidant and anticancer properties, as a model compound to prepare NLCs. Response surface methodology was employed to optimize THC-loaded Ch-coated NLCs (THC-Ch-NLCs) fabricated by high-shear homogenization. The optimized THC-Ch-NLCs had particle size of 244 ± 18 nm, zeta potential of -17.5 ± 0.5 mV, entrapment efficiency of 76.6 ± 0.2% and drug loading of 0.28 ± 0.01%. In vitro release study of THC-Ch-NLCs showed sustained release following the Korsmeyer-Peppas model with Fickian and non-Fickian diffusion at pH 7.4 and 5.5, respectively. THC-Ch-NLCs demonstrated significantly enhanced in vitro skin permeation, cell uptake, and remarkable cytotoxicity toward MD-MBA-231 breast cancer cells compared to the unencapsulated THC, suggesting Ch-NLCs as potential transdermal nanocarriers of THC for triple-negative breast cancer treatment.

Upgrading the Transdermal Biomedical Capabilities of Thyme Essential Oil Nanoemulsions Using Amphiphilic Oligochitosan Vehicles

(1) Background: Thymus vulgaris L. (thyme) essential oil (TEO) has gained much attention because of its long history of medicinal usage. However, the lack of precise chemical profiling of the TEO and methods to optimize the bioactivity and delivery of its constituents has hampered its research on quality control and biological function; (2) Methods: The current study aimed to analyze the TEO’s chemical composition using the GC-MS method and identify its key components. Another objective of this work is to study the impact of the protective layer of amphiphilic oligochitosan (AOC) on the physicochemical stability and transdermal potentials of TEO multilayer nanoemulsions formulated by the incorporation of TEO, Tween80, lecithin (Lec), and AOC; (3) Results: The AOC protective layer significantly improved the stability of TEO-based NEs as revealed by the constancy of their physicochemical properties (particle size and zeta potential) during storage for a week. Excessive fine-tuning of thyme extract NEs and the AOC protective layer’s persistent positive charge have been contributed to the thyme extract’s improved anti-inflammatory, transdermal, and anti-melanoma potentials; (4) Conclusions: the AOC-coated NEs could offer novel multifunctional nanoplatforms for effective transdermal delivery of lipophilic bioactive materials.

Recent Fabrication Methods to Produce Polymer-Based Drug Delivery Matrices (Experimental and In Silico Approaches)

The study of novel drug delivery systems represents one of the frontiers of the biomedical research area. Multi-disciplinary scientific approaches combining traditional or engineered technologies are used to provide major advances in improving drug bioavailability, rate of release, cell/tissue specificity and therapeutic index. Biodegradable and bio-absorbable polymers are usually the building blocks of these systems, and their copolymers are employed to create delivery components. For example, poly (lactic acid) or poly (glycolic acid) are often used as bricks for the production drug-based delivery systems as polymeric microparticles (MPs) or micron-scale needles. To avoid time-consuming empirical approaches for the optimization of these formulations, in silico-supported models have been developed. These methods can predict and tune the release of different drugs starting from designed combinations. Starting from these considerations, this review has the aim of investigating recent approaches to the production of polymeric carriers and the combination of in silico and experimental methods as promising platforms in the biomedical field.

Engineered Bacterial Cellulose Nanostructured Matrix for Incubation and Release of Drug-Loaded Oil in Water Nanoemulsion

Bacterial cellulose (BC) is a highly pure form of cellulose produced by bacteria, which possesses numerous advantages such as good mechanical properties, high chemical flexibility, and the ability to assemble in nanostructures. Thanks to these features, it achieved a key role in the biomedical field and in drug delivery applications. BC showed its ability to modulate the release of several drugs and biomolecules to the skin, thus improving their clinical outcomes. This work displays the loading of a 3D BC nanonetwork with an innovative drug delivery nanoemulsion system. BC was optimized by static culture of SCOBY (symbiotic colony of bacteria and yeast) and characterized by morphological and ultrastructural analyses, which indicate a cellulose fiber diameter range of 30–50 nm. BC layers were then incubated at different time points with a nanocarrier based on a secondary nanoemulsion (SNE) previously loaded with a well-known antioxidant and anti-inflammatory agent, namely, coenzyme-Q10 (Co-Q10). Incubation of Co-Q10–SNE in the BC nanonetwork and its release were analyzed by fluorescence spectroscopy.

Biocompatible, photo-responsive layer-by-layer polymer nanocapsules with an oil core: in vitro and in vivo study

In cancer therapy, stimulus-responsive drug delivery systems are of particular interest for reducing side effects in healthy tissues and improving drug selectivity in the tumoral ones. Here, a strategy for the preparation of a photo-responsive cross-linked trilayer deposited onto an oil-in-water nanoemulsion via a layer-by-layer technique is reported. The system is made of completely biocompatible materials such as soybean oil, egg lecithin and glycol chitosan, with heparin as the polymeric shell. The oil core is pre-loaded with curcumin as a model lipophilic active molecule with anti-tumoral properties. The trilayer cross-linkage is performed via a photoinitiator-free thiol-ene 'click' reaction. In particular, the system is implemented with an o-nitrobenzyl group functionalized with a thiol moiety which can perform both the thiol-ene 'click' reaction and the cleavage meant for controlled drug release at two different wavelengths, respectively. So the preparation and characterization of a photo-responsive natural nanocarrier (PNC) that is stable under physiological conditions owing to the thiol-ene cross-linkage are reported. PNC performance has been assessed in vitro on melanoma cells as well as in vivo on xenograft tumour-induced mice.

Active targeting of cancer cells by CD44 binding peptide-functionalized oil core-based nanocapsules

Selectivity in tumor targeting is one of the major issues in cancer treatment. Therefore, surface functionalization of drug delivery systems with active moieties, able to selectively target tumors, has become a worldwide-recognized strategy. The CD44 receptor is largely used as a biomarker, being overexpressed in several tumors, and consequently as a target thanks to the identification of the CD44 binding peptide. Here we implemented the CD44 binding peptide logic onto an oil core–polymer multilayer shell, taking into account and optimizing all relevant features of drug delivery systems, such as small size (down to 100 nm), narrow size distribution, drug loading capability, antifouling and biodegradability. Besides promoting active targeting, the oil core-based system enables the delivery of natural and synthetic therapeutic compounds. Biological tests, using curcumin as a bioactive compound and fluorescent tag, demonstrated that CD44 binding peptide-functionalized nanocapsules selectively accumulate and internalize in cancer cells, compared to the control, thanks to ligand–receptor binding.

CD44 binding peptide was implemented onto an oil core–polymer multilayer shell of 100 nm size and completely biodegradable. Biological tests, demonstrated that the proposed nanocarrier selectively accumulates and internalizes in cancer cells.

Cell Membrane-Coated Oil in Water Nano-Emulsions as Biomimetic Nanocarriers for Lipophilic Compounds Conveyance

Recently, we developed ultra-stable oil in water nano-emulsions (O/W NEs), able to carry both internal and external cargos (Somes), such as lipophilic compounds and hydrophilic coatings, respectively, that we call here NEsoSomes. O/W NEs are an excellent bioengineering tool for drug and molecules delivery, due to their ability to dissolve a large number of hydrophobic compounds and protect them from hydrolysis and degradation under biological conditions. At present, no report is available on the combination of cell membrane coatings with such nanocarriers, probably due to their typical instability feature. Since then, we have reported, for the first time, a new cell membrane (CM)-coated nanomaterial composed of membranes extracted from glioblastoma cancer cells (U87-MG) deposited on NEsoSomes, through a liquid-liquid interface method, to produce highly controllable membrane caked nano-capsules, namely CM-NEsoSomes. CM-NEsoSomes were physically characterized by dynamic light scattering (DLS) over time and their correct morphology was analyzed by confocal and transmission electron microscopy (TEM) microscopy. Moreover, CM-NEsoSomes biocompatibility was tested on the healthy model cell line, performing cell cytotoxicity and uptake assay, showing nanocarriers uptake by cells with no induced cytotoxicity.

Prolonged activity of a recombinant manganese superoxide dismutase through a formulation of polymeric multi-layer nanoassemblies targeting cancer cells

A new isoform of human manganese superoxide dismutase (SOD) has been recently isolated and obtained in a synthetic recombinant form and termed rMnSOD. As compared to other SODs, this isoform exhibits a dramatically improved cellular uptake and an intense antioxidant and antitumoral activity. Unfortunately, its use is severely hampered as this active pharmaceutical ingredient (API) in solution suffers from remarkable instability, which realizes as an interplay of unfolding and aggregation phenomena. This leads the API to be ineffective after three weeks only when stored at 4°C. A formulation strategy was undertaken to mitigate this instability. This was based on the incorporation of the API in hyaluronic acid and its layer-by-layer deposition over a chitosan-n-acetyl cysteine- monolayer nanoemulsion (NE) and its subsequent coverage with a further external interface of a chitosan-n-acetyl cysteine. The obtained constructs were tested over a selected panel of healthy and cancerous cell lines. The undertaken formulation strategy enhanced the API's effect in vitro already at time zero, maintaining the efficacy of this anticancer agent until up to 30 weeks when stored at 4°C.

Physicochemical Characterization of Finasteride Nanosystem for Enhanced Topical Delivery

INTRODUCTION

The current work aimed to formulate a novel chitosan-based finasteride nanosystem (FNS-NS) for skin delivery to optimize the drug availability in skin for a longer time and enhance ex vivo performance of finasteride against androgenic alopecia.

METHODS

Both undecorated and chitosan decorated FNS-NSs were synthesized by a high energy emulsification technique. All the prepared nanosystems were further subjected to physicochemical characterizations like pH, viscosity, encapsulation efficiency, surface morphology and in vitro drug release behavior. The influence of the nanosystem on the drug permeation and retention in rat skin was examined using Franz diffusion cell apparatus.

RESULTS

The droplet size of developed nanosystems ranged from 41 to 864 nm with a low polydispersity index. The zeta potential of the nanosystems was between -10 mV and +56 mV. This chitosan decorated nanosystem exhibited controlled drug release, ie about 78-97% in 24 h. Among all the nanosystems, our chitosan decorated formulation (F5) had low drug permeation (16.35 µg/cm2) and higher drug retention (10.81 µg/cm2).

CONCLUSION

The abovementioned results demonstrate satisfactory in vitro drug release, skin retention profiles and ex vivo performance with chitosan decorated FNS-NS (F5). This optimized formulation could increase drug availability in skin and could become a promising carrier for topical delivery to treat androgenic alopecia.

Electrostatic Surface Properties of Blood and Semen Extracellular Vesicles: Implications of Sialylation and HIV-Induced Changes on EV Internalization

Although extracellular vesicle (EV) surface electrostatic properties (measured as zeta potential, ζ-potential) have been reported by many investigators, the biophysical implications of charge and EV origin remains uncertain. Here, we compared the ζ-potential of human blood EVs (BEVs) and semen EVs (SEVs) from 26 donors that were HIV-infected (HIV+, n = 13) or HIV uninfected (HIV-, n = 13). We found that, compared to BEVs that bear neutral surface charge, SEVs were significantly more negatively charged, even when BEVs and SEVs were from the same individual. Comparison of BEVs and SEVs from HIV- and HIV+ groups revealed subtle HIV-induced alteration in the ζ-potential of EVs, with the effect being more significant in SEVs (∆ζ-potential = -8.82 mV, p-value = 0.0062) than BEVs (∆ζ-potential = -1.4 mV, p-value = 0.0462). These observations were validated by differences in the isoelectric point (IEP) of EVs, which was in the order of HIV + SEV ≤ HIV-SEV ≪ HIV + BEV ≤ HIV-BEV. Functionally, the rate and efficiency of SEV internalization by the human cervical epithelial cell line, primary peripheral blood lymphocytes, and primary blood-derived monocytes were significantly higher than those of BEVs. Mechanistically, removal of sialic acids from the surface of EVs using neuraminidase treatment significantly decreased SEV's surface charge, concomitant with a substantial reduction in SEV's internalization. The neuraminidase effect was independent of HIV infection and insignificant for BEVs. Finally, these results were corroborated by enrichment of glycoproteins in SEVs versus BEVs. Taken together, these findings uncover fundamental tissue-specific differences in surface electrostatic properties of EVs and highlight the critical role of surface charge in EV/target cell interactions.

Polymer Capsules with Hydrophobic Liquid Cores as Functional Nanocarriers

Recent developments in the fabrication of core-shell polymer nanocapsules, as well as their current and future applications, are reported here. Special attention is paid to the newly introduced surfactant-free fabrication method of aqueous dispersions of nanocapsules with hydrophobic liquid cores stabilized by amphiphilic copolymers. Various approaches to the efficient stabilization of such vehicles, tailoring their cores and shells for the fabrication of multifunctional, navigable nanocarriers and/or nanoreactors useful in various fields, are discussed. The emphasis is placed on biomedical applications of polymer nanocapsules, including the delivery of poorly soluble active compounds and contrast agents, as well as their use as theranostic platforms. Other methods of fabrication of polymer-based nanocapsules are briefly presented and compared in the context of their biomedical applications.

Nano-Encapsulation of Coenzyme Q10 in Secondary and Tertiary Nano-Emulsions for Enhanced Cardioprotection and Hepatoprotection in Human Cardiomyocytes and Hepatocytes During Exposure to Anthracyclines and Trastuzumab

Introduction

CoenzymeQ₁₀ (CoQ₁₀) is a well-known antioxidant and anti-inflammatory agent with cardioprotective properties. However, clinical trials based on its oral administration have failed to provide significant effect on cardiac functionality. The main limitation of CoQ₁₀ is based on its very low oral bioavailability and instability that limit dramatically its effects as a cardioprotective agent. Herein, we loaded CoQ₁₀ in high bioavailable nano-emulsions (NEs) coated with chitosan or chitosan and hyaluronic acid in order to improve its performance.

Methods

We tested cardioprotective and hepatoprotective effects of CoQ₁₀-loaded nano-carriers against Doxorubicin and Trastuzumab toxicities in cardiomyocytes and liver cells through analysis of cell viability, lipid peroxidation, expression of leukotrienes, p65/NF-kB and pro-inflammatory cytokines involved in anticancer-induced cardio and hepatotoxicity.

Results

Nano-carriers showed high stability and loading ability and increased cell viability both in hepatocytes and cardiomyocytes during anticancer treatments. We observed that these effects are mediated by the inhibition of lipid peroxidation and reduction of the inflammation. CoQ₁₀-loaded nano-emulsions showed also strong anti-inflammatory effects reducing leukotriene B4 and p65/NF-κB expression and Interleukin 1β and 6 production during anticancer treatments.

Discussion

Anthracyclines and Human epidermal growth factor receptor (HER2) inhibitors have shown significant anticancer effects in clinical practice but their use is characterized by cardiotoxicity and hepatotoxicity. Nano-carriers loaded with CoQ₁₀ showed cardio and hepatoprotective properties mediated by reduction of oxidative damages and pro-inflammatory mediators. These results set the stage for preclinical studies of cardio and hepatoprotection in HER2+ breast cancer-bearing mice treated with Doxorubicin and Trastuzumab.

Matrix metalloproteinase-cleavable nanocapsules for tumor-activated drug release

In the war against cancer, nanotechnology-based drug delivery systems may play a significant role by enhancing the efficacy of conventional therapies. Here, we tried to address some major limitations plaguing anticancer drugs, namely, poor water solubility and off-target toxicity. The systems we propose are cross-linked polyelectrolyte nanocapsules based on an oil-core and a matrix metalloproteinase-2 (MMP-2)-cleavable shell. They can load hydrophobic drugs, prevent their systemic leakage, and release their payload upon an endogenous stimulus. Both the stability enhancement and the stimuli-responsive drug release mechanisms were achieved by cross-linking the nanocapsule shell with an MMP-2-sensitive peptide. On the basis of this strategy, the system maintained its stability in PBS up to one month. Further, when tested on 3D tumor and healthy spheroid models, the nanocapsules were able to disrupt their integrity preferentially in the tumor-like microenvironment. The high level of MMP-2 enzymes expressed by tumor spheroids, indeed, catalyzed the disassembly of the nanocapsules, which ultimately leads to drug release. Therefore, this device holds great potential as a smart system that allows for the safe transport of hydrophobic drugs and for a spatially controlled release upon an endogenous stimulus coming from the very nature of the tumor itself. STATEMENT OF SIGNIFICANCE: The performance of nanoparticle-based therapeutic approaches is often hindered by some intrinsic limitations typically including laborious drug loading methods, synthetic routes of preparation and stability issues. In this work, we implemented for the first time a smart drug delivery strategy into oil-core multilayer nanocapsules, which represent an ideal family of nanocarriers. To this aim, we developed a robust method enabling the use of soft matters like oil-core nanocapsules combined with a microenvironmentally triggered release mechanism. The efficacy of nanocapsules was tested on tumor and healthy spheroids. Results clearly demonstrate their selective drug release, triggered by a stimulus intrinsically present in tumor microenvironment. We believe this study is of particular interest for cancer research and paves the way for the use of these robust stimuli-responsive nanocapsules in vivo.

Oil Core-PEG Shell Nanocarriers for In Vivo MRI Imaging

Oil-in-water emulsions represent a promising carrier for in vivo imaging because of the possibility to convey poorly water-soluble species. To promote accumulation at the tumor site and prolong circulation time, reduction of carrier size and surface PEGylation plays a fundamental role. In this work a novel, simple method to design an oil-core/PEG-shell nanocarrier is reported. A PEG-shell is grown around a monodisperse oil-in-water nanoemulsion with a one-pot method, using the radical polymerization of poly(ethylene glycol)diacrylate. PEG polymerization is triggered by UV, obtaining a PEG-shell with tunable thickness. This core-shell nanosystem combines the eluding feature of the PEG with the ability to confine high payloads of lipophilic species. Indeed, the core is successfully loaded with a lipophilic contrast agent, namely super paramagnetic iron oxide nanocubes. Interestingly, it is demonstrated an in vitro and an in vivo MRI response of the nanocapsules. Additionally, when the nanosystem loaded with nanocubes is mixed with a fluorescent contrast agent, indo-cyanine green, a relevant in vitro photoacoustic effect is observed. Moreover, viability and cellular uptake studies show no significant cell cytotoxicity. These results, together with the choice of low cost materials and the scale up production, make this nanocarrier a potential platform for in vivo imaging.

Cardioprotective Effects of Nanoemulsions Loaded with Anti-Inflammatory Nutraceuticals against Doxorubicin-Induced Cardiotoxicity

Doxorubicin is a highly active antineoplastic agent, but its clinical use is limited because of its cardiotoxicity. Although nutraceuticals endowed with anti-inflammatory properties exert cardioprotective activity, their bioavailability and stability are inconsistent. In an attempt to address this issue, we evaluated whether bioavailable nanoemulsions loaded with nutraceuticals (curcumin and fresh and dry tomato extracts rich in lycopene) protect cardiomyoblasts (H9C2 cells) from doxorubicin-induced toxicity. Nanoemulsions were produced with a high-pressure homogenizer. H9C2 cells were incubated with nanoemulsions loaded with different nutraceuticals alone or in combination with doxorubicin. Cell viability was evaluated with a modified MTT method. The levels of the lipid peroxidation products malondialdehyde (MDA) and 4-hydroxy-2-butanone (4-HNA), and of the cardiotoxic-related interleukins IL-6, IL-8, IL-1β and IL-10, tumor necrosis factor-alpha (TNF-α), and nitric oxide were analyzed in cardiomyoblasts. The hydrodynamic size of nanoemulsions was around 100 nm. Cell viability enhancement was 35–40% higher in cardiomyoblasts treated with nanoemulsion + doxorubicin than in cardiomyoblasts treated with doxorubicin alone. Nanoemulsions also protected against oxidative stress as witnessed by a reduction of MDA and 4-HNA. Notably, nanoemulsions inhibited the release of IL-6, IL-8, IL-1β, TNF-α and nitric oxide by around 35–40% and increased IL-10 production by 25–27% versus cells not treated with emulsions. Of the nutraceuticals evaluated, lycopene-rich nanoemulsions had the best cardioprotective profile. In conclusion, nanoemulsions loaded with the nutraceuticals described herein protect against cardiotoxicity, by reducing inflammation and lipid oxidative stress. These results set the stage for studies in preclinical models.

In vitro study of intestinal epithelial interaction with engineered oil in water nanoemulsions conveying curcumin

The development of innovative nano-bio-encapsulation systems continues to be an area of intense activity as the demand of improved delivery systems is constantly increasing in several fields including nanomedicine. For this purpose, an important goal is carrying out appropriate engineering of the surface of these nanocarriers to satisfy the organ target features for an effective in situ release and elucidate the mechanism of action which most of the time is neglected. Here, an oil-in-water (O/W) nanoemulsion coated with a polysaccharide layer film - i.e. a glycol chitosan modified with a thiol moiety - was used as nanocarrier to convey a promising poorly water-soluble nature based drug, curcumin. The final nanocarrier was completely bio-compatible and bio-stable. We investigated the enhancement of the effect of curcumin loaded in our system across monolayers of intestinal epithelial cells CaCo-2 in Transwell culture. Such in vitro platform resulted suitable to evaluate the functionality of the proposed nanocarrier and its adhesion towards the mucosal epithelial layer and, as applicative example, to investigate the anti-inflammatory effects exerted by the encapsulation of curcumin.

Enhanced Drug Delivery into Cell Cytosol via Glycoprotein H-Derived Peptide Conjugated Nanoemulsions

The key role of nanocarriers in improving the pharmacological properties of commonly used drugs is recognized worldwide. It is also known that in the development of new effective nanocarriers the use of targeting moieties integrated on their surface is essential. Herein, we propose a nanocarrier based on an oil in water nanoemulsion coated with a membranotropic peptide derived from the glycoprotein H of Herpes simplex virus 1, known as gH625, in order to reduce endolysosomal accumulation and to enhance cytosolic localization. In addition, we show an enhanced anti-inflammatory activity of curcumin, a bioactive compound isolated from the Curcuma longa plant, when loaded into our engineered nanocarriers. This effect is a consequence of a higher uptake combined with a high curcumin preservation exerted by the active nanocapsules compared to control ones. When loaded into our nanocapsules, indeed, curcumin molecules are directly internalized into the cytosol rather than into lysosomes. Further, in order to extend the in vitro experimental setting with a more complex model and to explore the possibility to use our nanocarriers for further biological applications, we tested their performance in a 3D sprouting angiogenesis model. Finally, we show promising preliminary in vivo results by assessing the anti-inflammatory properties of the proposed nanocarrier.

Thermoresponsive Stability of Colloids in Butyl Acetate/Ethanol Binary Solvent Realized by Grafting Linear Acrylate Copolymers

We have developed a new class of thermoresponsive colloids that can exhibit a sharp reversible transition between dispersion and aggregation in binary BuAc/EtOH solvents based on the UCST (upper critical solution temperature)-type phase separation. This is realized by grafting linear PMMA-BA (random) copolymer onto the colloidal particles. We have selected TiO₂/PS hybrid spheres (HSs) as a model system to demonstrate our general design concept. By grafting the linear PMMA-BA copolymer onto the HS surface, with the molecular weight from 30 to 40 kDa, we found that the thermoresponsive transition between dispersion and aggregation is fast, sharp, and reversible. At high mass fractions of the HSs, we have even observed a sharp transition between dispersion and gelation (or phase separation). The transition temperature can be tuned by varying the binary solvent composition, BuAc/EtOH, and the molecular weight of the grafted linear copolymer in the range from 5 to 55 °C. One of the most important features of this work is that the thermoresponsive materials used in organic solvents are initially synthesized in water with widely applied conventional (instead of research-based) techniques, thus being well suited for industrial production. In addition, the proposed approach is rather general and applicable to realizing the thermoresponsive transition for various types of colloids and nanoparticles.

Oil/water nano-emulsion loaded with cobalt ferrite oxide nanocubes for photo-acoustic and magnetic resonance dual imaging in cancer: in vitro and preclinical studies

Dual imaging dramatically improves detection and early diagnosis of cancer. In this work we present an oil in water (O/W) nano-emulsion stabilized with lecithin and loaded with cobalt ferrite oxide (Co_0.5Fe_2.5O₄) nanocubes for photo-acoustic and magnetic resonance dual imaging. The nanocarrier is responsive in in vitro photo-acoustic and magnetic resonance imaging (MRI) tests. A clear and significant time-dependent accumulation in tumor tissue is shown in in vivo photo-acoustic studies on a murine melanoma xenograft model. The proposed O/W nano-emulsion exhibits also high values of r₂/r₁ (ranging from 45 to 85, depending on the magnetic field) suggesting a possible use as T₂ weighted image contrast agents. In addition, viability and cellular uptake studies show no significant cytotoxicity on the fibroblast cell line. We also tested the O/W nano-emulsion loaded with curcumin against melanoma cancer cells demonstrating a significant cytotoxicity and thus showing possible therapeutic effects in addition to the in vivo imaging.

Ultrastable Liquid-Liquid Interface as Viable Route for Controlled Deposition of Biodegradable Polymer Nanocapsules

Liquid-liquid interfaces are highly dynamic and characterized by an elevated interfacial tension as compared to solid-liquid interfaces. Therefore, they are gaining an increasing interest as viable templates for ordered assembly of molecules and nanoparticles. However, liquid-liquid interfaces are more difficult to handle compared to solid-liquid interfaces; their intrinsic instability may affect the assembly process, especially in the case of multiple deposition. Indeed, some attempts have been made in the deposition of polymer multilayers at liquid-liquid interfaces, but with limited control over size and stability. This study reports on the preparation of an ultrastable liquid-liquid interface based on an O/W secondary miniemulsion and its possible use as a template for the self-assembly of polymeric multilayer nanocapsules. Such polymer nanocapsules are made of entirely biodegradable materials, with highly controlled size-well under 200 nm-and multi-compartment and multifunctional features enriching their field of application in drug delivery, as well as in other bionanotechnology fields.

Multilayered silica-biopolymer nanocapsules with a hydrophobic core and a hydrophilic tunable shell thickness

Stable, biocompatible, multifunctional and multicompartment nanocarriers are much needed in the field of nanomedicine. Here, we report a simple, novel strategy to design an engineered nanocarrier system featuring an oil-core/hybrid polymer/silica-shell. Silica shells with a tunable thickness were grown in situ, directly around a highly mono-disperse and stable oil-in-water emulsion system, stabilized by a double bio-functional polyelectrolyte heparin/chitosan layer. Such silica showed a complete degradation in a physiological medium (SBF) in a time frame of three days. Moreover, the outer silica shell was coated with polyethyleneglycol (PEG) in order to confer antifouling properties to the final nanocapsule. The outer silica layer combined its properties (it is an optimal bio-interface for bio-conjugations and for the embedding of hydrophilic drugs in the porous structure) with the capability to stabilize the oil core for the confinement of high payloads of lipophilic tracers (e.g., CdSe quantum dots, Nile Red) and drugs. In addition, polymer layers--besides conferring stability to the emulsion while building the silica shell--can be independently exploited if suitably functionalized, as demonstrated by conjugating chitosan with fluorescein isothiocyanate. Such numerous features in a single nanocarrier system make it very intriguing as a multifunctional platform for smart diagnosis and therapy.

Bioinspired Oil Core/Silica Shell Nanocarriers with Tunable and Multimodal Functionalities

The application of multimodal systems in the field of nanomedicine is advantageous as they can perform two or more tasks simultaneously. Here a robust approach is presented mimicking biogenic silica to design a multilayered nanocarrier system with a central oil core encapsulated within a polymer-silica shell. The outermost silica shell has been deposited through a biosilicification process induced by poly-L-lysine molecules immobilized on the surface of emulsion droplets. This system can be simultaneously loaded with high amount of hydrophobic molecules or contrasting agents in the inner oil core, while the polymeric-silica layers can be easily tagged with at least two different contrasting agents. Additionally, the zwitterionic nature of the silica precipitating peptide (poly-L-lysine) has been efficiently exploited to modulate and entirely reverse the surface charge of the nanocarrier without using any additional coating material. It has been demonstrated experimentally that the designed nanocapsular system is monodisperse, nontoxic, cargo protective, tunable in thickness, fluorescent, and magnetic resonance imaging (MRI) active so highly versatile for multiple applications in the field of drug delivery and in vivo imaging.

Thermodynamic signature of secondary nano-emulsion formation by isothermal titration calorimetry

The stabilization of oil in water nano-emulsions by means of a polymer coating is extremely important; it prolongs the shelf life of the product and makes it suitable for a variety of applications ranging from nutraceutics to cosmetics and pharmaceutics. To date, an effective methodology to assess the best formulations in terms of thermodynamic stability has yet to be designed. Here, we perform a complete physicochemical characterization based on isothermal titration calorimetry (ITC) compared to conventional dynamic light scattering (DLS) to identify polymer concentration domains that are thermodynamically stable and to define the degree of stability through thermodynamic functions depending upon any relevant parameter affecting the stability itself, such as type of polymer coating, droplet distance, etc. For instance, the method was proven by measuring the energetics in the case of two different biopolymers, chitosan and poly-L-lysine, and for different concentrations of the emulsion coated with poly-L-lysine.