Genotoxicity of metal oxide nanomaterials: review of recent data and discussion of possible mechanisms

Genotoxicity of nanoparticles evaluated using the in vitro micronucleus assay, a review of recent data§

The in vitro micronucleus assay is a well-known and established component of the standard genotoxicity test battery. The growing use of nanomaterials around the world along with human exposure to them has increased the need for risk assessment with regard to safety, including potential genotoxicity. The in vitro micronucleus assay is one of the most used tests for evaluating the genotoxicity of nanomaterials. This review compiles studies since 2017 that performed assessments of micronucleus formation in vitro after cellular exposure to different nanomaterials. Genotoxicity of a broad range of nanomaterials including silver, cerium, zinc, gold, nickel, cadmium, titanium, carbon, and aluminum in different cell types were reviewed. While clear trends could be seen for some nanoparticle types like silver and cerium nanoparticles, others like gold nanoparticles showed mixed results. This review highlights the usefulness and effectiveness of the micronucleus assay for studying the genotoxicity of nanomaterials, in part, and is also careful to note that standard guidelines should be followed when conducting this assay in order to generate reliable and quality-driven data.

Toxic and protective mechanisms of cyanobacteria Synechococcus sp. in response to zinc oxide nanoparticles

The rapid growth of zinc oxide nanoparticles (ZnO NPs) production leads to their accumulation in the environment. However, the impact of ZnO NPs on aquatic ecosystems has not been fully studied. The question of assessing the impact of this pollutant on microalgae and cyanobacteria as the primary-productive link of aquatic biocenoses remains relevant. In the presented study, changes in morphology, structural-functional and fluorescent indices of cyanobacterium Synechococcus sp. were established for concentrations of zinc oxide nanoparticles (ZnO NPs) ranging from 0.3-14 mg L-1. ZnO NPs have mechanical and cytotoxic effects on Synechococcus sp. cells. At high pollutant concentrations (8.4-14 mg L-1), pronounced deformation of Synechococcus sp. cell membranes was observed, which was caused by the mechanical effect of the pollutant on the cells and heteroaggregation of ZnO particles with cyanobacterial cells. At the same time, no effect of NPs on the cell morphometric indices was revealed. Physiological and biochemical parameters of single cell Synechococcus sp. and cells aggregated with NPs do not differ significantly at ZnO NPs concentrations of 1.4-14 mg L-1. At concentrations above 1.4 mg L-1, the production of reactive oxygen species in Synechococcus sp. significantly increased in both groups of cells. At the same time, deterioration of other physiological and biochemical parameters of cells was also observed. Growth inhibition, decrease of intracellular content of chlorophyll and phycoerythrin, dissociation of phycoerythrobilin in antenna complexes, decrease of metabolic activity of cells were observed. High sensitivity of the photosynthetic apparatus of Synechococcus sp. to ZnO NPs was shown. It was found that in Synechococcus sp. Unlike eukaryotic algae, the maximum efficiency of light quantum utilization and the minimum values of non-photochemical quenching of chlorophyll fluorescence are registered under light conditions corresponding to the growth conditions of cyanobacteria. The results of the presented study contribute to the understanding of the mechanisms of toxicity of dispersed ZnO NPs and effective assessment of their probable ecological risk and interaction with phototrophic microorganisms.

AI-based nanotoxicity data extraction and prediction of nanotoxicity

With the growing use of nanomaterials (NMs), assessing their toxicity has become increasingly important. Among toxicity assessment methods, computational models for predicting nanotoxicity are emerging as alternatives to traditional in vitro and in vivo assays, which involve high costs and ethical concerns. As a result, the qualitative and quantitative importance of data is now widely recognized. However, collecting large, high-quality data is both time-consuming and labor-intensive. Artificial intelligence (AI)-based data extraction techniques hold significant potential for extracting and organizing information from unstructured text. However, the use of large language models (LLMs) and prompt engineering for nanotoxicity data extraction has not been widely studied. In this study, we developed an AI-based automated data extraction pipeline to facilitate efficient data collection. The automation process was implemented using Python-based LangChain. We used 216 nanotoxicity research articles as training data to refine prompts and evaluate LLM performance. Subsequently, the most suitable LLM with refined prompts was used to extract test data, from 605 research articles. As a result, data extraction performance on training data achieved F1D.E. (F1 score for Data Extraction) ranging from 84.6 % to 87.6 % across different LLMs. Furthermore, using the extracted dataset from test set, we constructed automated machine learning (AutoML) models that achieved F1N.P. (F1 score for Nanotoxicity Prediction) exceeding 86.1 % in predicting nanotoxicity. Additionally, we assessed the reliability and applicability of models by comparing them in terms of ground truth, size, and balance. This study highlights the potential of AI-based data extraction, representing a significant contribution to nanotoxicity research.

Graphene-based materials: an innovative approach for neural regeneration and spinal cord injury repair

Spinal cord injury (SCI), the most serious disease affecting the central nervous system (CNS), is one of contemporary medicine's most difficult challenges, causing patients to suffer physically, emotionally, and socially. However, due to recent advances in medical science and biomaterials, graphene-based materials (GBMs) have tremendous potential in SCI therapy due to their wonderful and valuable properties, such as physicochemical properties, extraordinary electrical conductivity, distinct morphology, and high mechanical strength. This review discusses SCI pathology and GBM characteristics, as well as recent in vitro and in vivo findings on graphenic scaffolds, electrodes, and injectable achievements for SCI improvement using neuroprotective and neuroregenerative techniques to improve neural structural and functional repair. Additionally, it suggests possible ideas and desirable products for graphene-based technological advances, intending to reach therapeutic importance for SCI.

Current nanocomposite advances for biomedical and environmental application diversity

Nanocomposite materials are emerging as key players in addressing critical challenges in healthcare, energy storage, and environmental remediation. These innovative systems hold great promise in engineering effective solutions for complex problems. Nanocomposites have demonstrated various advantages such as simplicity, versatility, lightweight, and potential cost-effectiveness. By reinforcing synthetic and natural polymers with nanomaterials, a range of nanocomposites have exhibited unique physicochemical properties, biocompatibility, and biodegradability. Current research on nanocomposites has demonstrated promising clinical and translational applications. Over the past decade, the production of nanocomposites has emerged as a critical nano-structuring methodology due to their adaptability and controllable surface structure. This comprehensive review article systematically addresses two principal domains. A comprehensive survey of metallic and nonmetallic nanomaterials (nanofillers), elucidating their efficacy as reinforcing agents in polymeric matrices. Emphasis is placed on the methodical design and engineering principles governing the development of functional nanocomposites. Additionally, the review provides an exhaustive examination of recent noteworthy advancements in industrial, environmental, biomedical, and clinical applications within the realms of nanocomposite materials. Finally, the review concludes by highlighting the ongoing challenges facing nanocomposites in a wide range of applications.

Mechanisms and Assessment of Genotoxicity of Metallic Engineered Nanomaterials in the Human Environment

Engineered nanomaterials (ENMs) have a broad array of applications in agriculture, engineering, manufacturing, and medicine. Decades of toxicology research have demonstrated that ENMs can cause genotoxic effects on bacteria, mammalian cells, and animals. Some metallic ENMs (MENMs), e.g., metal or metal oxide nanoparticles TiO2 and CuO, induce genotoxicity via direct DNA damage and/or reactive oxygen species-mediated indirect DNA damage. There are various physical features of MENMs that may play an important role in promoting their genotoxicity, for example, size and chemical composition. For a valid genotoxicity assessment of MENMs, general considerations should be given to various factors, including, but not limited to, NM characterization, sample preparation, dosing selection, NM cellular uptake, and metabolic activation. The recommended in vitro genotoxicity assays of MENMs include hprt gene mutation assay, chromosomal aberration assay, and micronucleus assay. However, there are still knowledge gaps in understanding the mechanisms underlying the genotoxicity of MENMs. There are also a variety of challenges in the utilization and interpretation of the genotoxicity assessment assays of MENMs. In this review article, we provide mechanistic insights into the genotoxicity of MENMs in the human environment. We review advances in applying new endpoints, biomarkers, and methods to the genotoxicity assessments of MENMs. The guidance of the United States, the United Kingdom, and the European Union on the genotoxicity assessments of MENMs is also discussed.

Inflammatory response of nanoparticles: Mechanisms, consequences, and strategies for mitigation

Numerous nano-dimensioned materials have been generated as a result of several advancements in nanoscale science such as metallic nanoparticles (mNPs) which have aided in the advancement of related research. As a result, several significant nanoscale materials are being produced commercially. It is expected that in the future, products that are nanoscale, like mNPs, will be useful in daily life. Despite certain benefits, widespread use of metallic nanoparticles and nanotechnology has negative effects and puts human health at risk because of their continual accumulation in closed biological systems, along with their complex and diverse migratory and transformation pathways. Once within the human body, nanoparticles (NPs) disrupt the body's natural biological processes and trigger inflammatory responses. These NPs can also affect the immune system by activating separate pathways that either function independently or interact with one another. Cytotoxic effects, inflammatory response, genetic material damage, and mitochondrial dysfunction are among the consequences of mNPs. Oxidative stress and reactive oxygen species (ROS) generation caused by mNPs depend upon a multitude of factors that allow NPs to get inside cells and interact with biological macromolecules and cell organelles. This review focuses on how mNPs cause inflammation and oxidative stress, as well as disrupt cellular signaling pathways that support these effects. In addition, possibilities and problems to be reduced are addressed to improve future research on the creation of safer and more environmentally friendly metal-based nanoparticles for commercial acceptance and sustainable use in medicine and drug delivery.

Nanoformulations for dismantling fungal biofilms: The latest arsenals of antifungal therapy

Globally, fungal infections have evolved as a strenuous challenge for clinicians, particularly in patients with compromised immunity in intensive care units. Fungal co-infection in Covid-19 patients has made the situation more formidable for healthcare practitioners. Surface adhered fungal population known as biofilm often develop at the diseased site to elicit antifungal tolerance and recalcitrant traits. Thus, an innovative strategy is required to impede/eradicate developed biofilm and avoid the formation of new colonies. The development of nanocomposite-based antibiofilm solutions is the most appropriate way to withstand and dismantle biofilm structures. Nanocomposites can be utilized as a drug delivery medium and for fabrication of anti-biofilm surfaces capable to resist fungal colonization. In this context, the present review comprehensively described different forms of nanocomposites and mode of their action against fungal biofilms. Amongst various nanocomposites, efficacy of metal/organic nanoparticles and nanofibers are particularly emphasized to highlight their role in the pursuit of antibiofilm strategies. Further, the inevitable concern of nanotoxicology has also been introduced and discussed with the exigent need of addressing it while developing nano-based therapies. Further, a list of FDA-approved nano-based antifungal formulations for therapeutic usage available to date has been described. Collectively, the review highlights the potential, scope, and future of nanocomposite-based antibiofilm therapeutics to address the fungal biofilm management issue.

Sub-acute administration of metal-organic Framework-5 induces behavioral impairments and augments the levels of oxidative stress and inflammation in the brain of rats

Metal-organic frameworks (MOFs) are known as potential pharmaceutical carriers because of their structure. Here, we evaluated the sub-acute administrations of MOF-5 on behavioral parameters, oxidative stress, and inflammation levels in rats. Thirty-two male Wistar rats received four injections of saline or MOF-5 at different doses which were 1, 10, and 50 mg/kg via caudal vein. Y-Maze and Morris-Water Maze (MWM) tests were used to explore working memory and spatial learning and memory, respectively. The antioxidant capacity and oxidative stress level of brain samples were assessed by ferric reducing antioxidant power (FRAP) and thiobarbituric acid-reacting substance (TBARS) assay, respectively. The expression levels of GFAP, IL-1β, and TNF-α were also measured by quantitative real-time reverse-transcription PCR (qRT-PCR). Sub-acute administration of MOF-5 reduced the spatial learning and memory as well as working memory, dose-dependently. The levels of FRAP were significantly reduced in rats treated with MOF-5 at higher doses. The Malondialdehyde (MDA) levels increased at the dose of 50 mg/kg. Additionally, the expression levels of IL-1β and TNF-α were significantly elevated in the rats' brains that were treated with MOF-5. Our findings indicate that sub-acute administration of MOF-5 induces cognitive impairment dose-dependently which might be partly mediated by increasing oxidative stress and inflammation.

New methodological developments for testing the in vitro genotoxicity of nanomaterials: Comparison of 2D and 3D HepaRG liver cell models and classical and high throughput comet assay formats

Nanomaterials (NMs) are defined as materials with at least one external dimension below 100 nm. Their small size confers them interesting unique physico-chemical properties, hence NMs are increasingly used in a diversity of applications. However, the specific properties of NMs could also make them more harmful than their bulk counterparts. Therefore, there is a crucial need to deliver efficient NM hazard assessment in order to sustain the responsible development of nanotechnology. This study analysed the genotoxic potential of several NMs: one titanium dioxide (TiO2) and two zinc oxide NMs (ZnO) that were tested up to 100 μg/mL on 2D and 3D hepatic HepaRG models. Genotoxicity analysis was performed comparing the alkaline comet assay in classical and high throughput formats. Moreover, oxidative DNA lesions were investigated with the Fpg-modified comet assay. Results showed that TiO2 NMs were not cytotoxic and not genotoxic in either cell model, although a small increase in the % tail DNA was observed in 3D HepaRG cells at 100 μg/mL in the classical format. The two ZnO NMs (ZnO S. NMs a commercial suspension and NM110 provided by the European Union Joint Research Centre) induced a concentration-dependent increase in cytotoxicity that was more pronounced in the 2D (>20% cytotoxicity was observed for ZnO S. at concentrations greater than 25 μg/mL, and for NM 110 at 50 μg/mL) than in the 3D model (more than 20% cytotoxicity for ZnO S. NMs at 50 μg/mL). While ZnO S. NMs induced DNA damage associated with cytotoxicity (at 25 and 50 μg/mL in 2D and 50 μg/mL in 3D), NM110 showed a clear genotoxic effect at non-cytotoxic concentrations (25 μg/mL in 2D and at 25 and 50 μg/mL in 3D). No major differences could be observed in the comet assay in the presence or absence of the Fpg enzyme. High throughput analysis using CometChip® mostly confirmed the results obtained with the classical format, and even enhanced the detection of genotoxicity in the 3D model. In conclusion, this study demonstrated that new approach methodologies (NAMs), 3D models and the high throughput format for the comet assay, were more efficient in the detection of genotoxic effects, and are therefore promising approaches to improve hazard assessment of NMs.

Silver nanoparticle ecotoxicity and phytoremediation: a critical review of current research and future prospects

Silver nanoparticles (AgNPs) are widely used in various industries, including textiles, electronics, and biomedical fields, due to their unique optical, electronic, and antimicrobial properties. However, the extensive use of AgNPs has raised concerns about their potential ecotoxicity and adverse effects on the environment. AgNPs can enter the environment through different pathways, such as wastewater, surface runoff, and soil application and can interact with living organisms through adsorption, ingestion, and accumulation, causing toxicity and harm. The small size, high surface area-to-volume ratio, and ability to generate reactive oxygen species (ROS) make AgNPs particularly toxic. Various bioremediation strategies, such as phytoremediation, have been proposed to mitigate the toxic effects of AgNPs and minimize their impact on the environment. Further research is needed to improve these strategies and ensure their safety and efficacy in different environmental settings.

Antioxidant response to ZnO nanoparticles in juvenile Takifugu obscurus: protective effects of salinity

The extensive utilization of Zinc Oxide nanoparticles (ZnO NPs) has garnered significant attention due to their detrimental impacts on ecosystem. Unfortunately, ecotoxicity of ZnO NPs in coastal waters with fluctuating salinity has been disregarded. This study mainly discussed the toxic effects of ZnO NPs on species inhabiting the transition zones between freshwater and brackish water, who are of great ecological and economic importance among fish. To serve as the model organism, Takifugu obscurus, a juvenile euryhaline fish, was exposed to different ZnO NPs concentrations (0-200 mg/L) and salinity levels (0 and 15 ppt). The results showed that a moderate increase in salinity (15 ppt) could alleviate the toxic effect of ZnO NPs, as evidenced by improved survival rates. The integrated biomarker response index on oxidative stress also revealed that the toxicity of ZnO NPs was higher in freshwater compared to brackish water. These outcomes can be attributed to higher salinity (15 ppt) reducing the bioavailability of ZnO NPs by facilitating their aggregation and inhibiting the release of metal ions. It is noteworthy that elevated salinity was found to alleviate ZnO NPs toxicity by means of osmotic adjustment via the activation of Na+/K+-ATPase activity. This study demonstrates the salinity-dependent effect of ZnO NPs on T. obscurus, suggesting the possibility for euryhaline fish like T. obscurus to adapt their habitat towards more saline environments, under constant exposure to ZnO NPs.

Comparative Analysis of Nucleic Acid-Binding Polymers as Potential Anti-Inflammatory Nanocarriers

Conventionally, nanocarriers are used to regulate the controlled release of therapeutic payloads. Increasingly, they can also be designed to have an intrinsic therapeutic effect. For example, a positively charged nanocarrier can bind damage-associated molecular patterns, inhibiting toll-like receptor (TLR) pathway activation and thus modulating inflammation. These nucleic acid-binding nanomaterials (NABNs), which scavenge pro-inflammatory stimuli, exist in diverse forms, ranging from soluble polymers to nanoparticles and 2D nanosheets. Unlike conventional drugs that primarily address inflammation symptoms, these NABPs target the upstream inflammation initiation pathway by removing the agonists responsible for inflammation. Many NABNs have demonstrated effectiveness in murine models of inflammatory diseases. However, these scavengers have not been systematically studied and compared within a single setting. Herein, we screen a subset of the most potent NABNs to define their relative efficiency in scavenging cell-free nucleic acids and inhibiting various TLR pathways. This study helps interpret existing in vivo results and provides insights into the future design of anti-inflammatory nanocarriers.

The toxicity of nanoparticles and their interaction with cells: an in vitro metabolomic perspective

Nowadays, nanomaterials (NMs) are widely present in daily life due to their significant benefits, as demonstrated by their application in many fields such as biomedicine, engineering, food, cosmetics, sensing, and energy. However, the increasing production of NMs multiplies the chances of their release into the surrounding environment, making human exposure to NMs inevitable. Currently, nanotoxicology is a crucial field, which focuses on studying the toxicity of NMs. The toxicity or effects of nanoparticles (NPs) on the environment and humans can be preliminary assessed in vitro using cell models. However, the conventional cytotoxicity assays, such as the MTT assay, have some drawbacks including the possibility of interference with the studied NPs. Therefore, it is necessary to employ more advanced techniques that provide high throughput analysis and avoid interferences. In this case, metabolomics is one of the most powerful bioanalytical strategies to assess the toxicity of different materials. By measuring the metabolic change upon the introduction of a stimulus, this technique can reveal the molecular information of the toxicity induced by NPs. This provides the opportunity to design novel and efficient nanodrugs and minimizes the risks of NPs used in industry and other fields. Initially, this review summarizes the ways that NPs and cells interact and the NP parameters that play a role in this interaction, and then the assessment of these interactions using conventional assays and the challenges encountered are discussed. Subsequently, in the main part, we introduce the recent studies employing metabolomics for the assessment of these interactions in vitro.

Immunotoxicity of metal and metal oxide nanoparticles: from toxic mechanisms to metabolism and outcomes

The influence of metal and metal oxide nanomaterials on various fields since their discovery has been remarkable. They have unique properties, and therefore, have been employed in specific applications, including biomedicine. However, their potential health risks cannot be ignored. Several studies have shown that exposure to metal and metal oxide nanoparticles can lead to immunotoxicity. Different types of metals and metal oxide nanoparticles may have a negative impact on the immune system through various mechanisms, such as inflammation, oxidative stress, autophagy, and apoptosis. As an essential factor in determining the function and fate of immune cells, immunometabolism may also be an essential target for these nanoparticles to exert immunotoxic effects in vivo. In addition, the biodegradation and metabolic outcomes of metal and metal oxide nanoparticles are also important considerations in assessing their immunotoxic effects. Herein, we focus on the cellular mechanism of the immunotoxic effects and toxic effects of different types of metal and metal oxide nanoparticles, as well as the metabolism and outcomes of these nanoparticles in vivo. Also, we discuss the relationship between the possible regulatory effect of nanoparticles on immunometabolism and their immunotoxic effects. Finally, we present perspectives on the future research and development direction of metal and metal oxide nanomaterials to promote scientific research on the health risks of nanomaterials and reduce their adverse effects on human health.

Salinity Moderated the Toxicity of Zinc Oxide Nanoparticles (ZnO NPs) towards the Early Development of Takifugu obscurus

ZnO nanoparticles (ZnO NPs) have been applied in a wide range of fields due to their unique properties. However, their ecotoxicological threats are reorganized after being discharged. Their toxic effect on anadromous fish could be complicated due to the salinity fluctuations during migration between freshwater and brackish water. In this study, the combined impact of ZnO NPs and salinity on the early development of a typical anadromous fish, obscure puffer (Takifugu obscurus), was evaluated by (i) observation of the nanoparticle characterization in salt solution; (ii) quantification of the toxicity to embryos, newly hatched larvae, and larvae; and (iii) toxicological analysis using biomarkers. It is indicated that with increased salinity level in brackish water (10 ppt), the toxicity of ZnO NPs decreased due to reduced dissolved Zn2+ content, leading to higher hatch rate of embryos and survival rate of larvae than in freshwater (0 ppt). The irregular antioxidant enzyme activity changes are attributed to the toxic effects of nanoparticles on CAT (catalase), but further determination is required. The results of present study have the significance to guide the wildlife conservation of Takifugu obscurus population.

Development of New Health Risk Assessment of Nanoparticles: EPA Health Risk Assessment Revised

The concentration of nanoparticles in the ambient air can lead to induced toxicities; however, it appears that nanoparticles’ unique properties are completely omitted when assessing health risks. This paper aims to enhance the EPA health risk assessment by incorporating two new variables that consider the size of nanoparticles: the toxicity multiplier and the size multiplier. The former considers the qualitative aspect of the size of particles within a concentration, whilst the latter takes into account the effects associated with the number of particles of the specific i-th size distribution interval. To observe the impact of the new variables, a case study was performed. The studied element was cadmium, which was measured using ICP-MS to discover concentrations of size fractions, ranging from <15.1 to <9830 nm. Next, the cadmium concentration is assessed using both the current state-of-the-art method and the proposed method with adjustments. Based on the new approach, the final risk was 1.1 × 10−5, which was almost 24 times higher compared with the current method. The contribution of nanoparticles to the risk value grew from barely 6% to an alarming 88%. Therefore, the enhanced method can lead to more realistic results when assessing the health risks of nanoparticles.

Cytotoxicity and Antibacterial Efficacy of AgCu and AgFe NanoAlloys: A Comparative Study

Although Ag nanoparticles (NPs) have been widely applied in daily life and in biomedical and industrial fields, there is a demand for Ag-based bimetallic nanoalloys (NAs), such as AgCu and AgFe, due to their enhanced antibacterial efficacy and reduced Ag consumption. In this work, we present a comparison study on the antibacterial efficacy and cytotoxicity rates of Ag NPs and AgCu and AgFe NAs to L929 mouse fibroblast cells using the CCK-8 technique based on the relative cell viability. The concept of the minimum death concentration (MDC) is introduced to estimate the cytotoxicity to the cells. It is found that the minimum inhibitory concentrations (MICs) of the NPs against E. coli and S. aureus decrease with the addition of both Cu and Fe. There is a strong correlation between the MDC and MIC, implying that the mechanisms of both antibacterial efficacy and cytotoxicity are similar. The enhanced antibacterial efficacy to bacteria and cytotoxicity toward the cell are attributed to Ag+ release. The following order is found for both the MIC and MDC: AgFe < AgCu < Ag NPs. However, there is no cytotoxicity to the L929 cells for AgFe and AgCu NAs at their MIC Ag concentrations against S. aureus.

Synthesis of Nanosilica for the Removal of Multicomponent Cd2+ and Cu2+ from Synthetic Water: An Experimental and Theoretical Study

Copper and cadmium ions are among the top 120 hazardous chemicals listed by the Agency for Toxic Substances and Disease Registry (ATSDR) that can bind to organic and inorganic chemicals. Silica is one of the most abundant oxides that can limit the transport of these chemicals into water resources. Limited work has focused on assessing the applicability of nanosilica for the removal of multicomponent metal ions and studying their interaction on the surface of this adsorbent. Therefore, this study focuses on utilizing a nanosilica for the adsorption of Cd²⁺ and Cu²⁺ from water. Experimental work on the single- and multi-component adsorption of these ions was conducted and supported with theoretical interpretations. The nanosilica was characterized by its surface area, morphology, crystallinity, and functional groups. The BET surface area was 307.64 m²/g with a total pore volume of 4.95×10−3 cm³/g. The SEM showed an irregular amorphous shape with slits and cavities. Several Si–O–Si and hydroxyl groups were noticed on the surface of the silica. The single isotherm experiment showed that Cd²⁺ has a higher uptake (72.13 mg/g) than Cu²⁺ (29.28 mg/g). The multicomponent adsorption equilibrium shows an affinity for Cd²⁺ on the surface. This affinity decreases with increasing Cu²⁺ equilibrium concentration due to the higher isosteric heat from the interaction between Cd and the surface. The experimental data were modeled using isotherms for the single adsorption, with the Freundlich and the non-modified competitive Langmuir models showing the best fit. The molecular dynamics simulations support the experimental data where Cd²⁺ shows a multilayer surface coverage. This study provides insight into utilizing nanosilica for removing heavy metals from water.

The g-C3N4@CdO/ZnO ternary composite: photocatalysis, thermodynamics and acute toxicity studies

Binary and ternary nanocomposites (NCs) were synthesized by precipitation and through facile one-pot ultrasonic assisted methods to serve as photocatalysts for treatment of wastewater as well as their toxicity toward aquatic organism (Nile tilapia). The crystalline structure, band gap energy and functional groups of these materials were characterized by XRD, UV-Vis, and FT-IR instrumental techniques. Based on the UV-Vis study, the band gap of ZnO/CdO (ZC) to hybrid g-C₃N₄@ZnO/CdO (GZC) nanocomposite was reduced from 3.41 eV to 3.21 eV, suggesting good charge carrier mobility. Photocatalytic degradation performances of ZC and GZC were further assessed by conducting methyl red (MR) photodegradation reaction using UV light. The highest degradation efficiency was achieved for GZC NCs (97.78%) than ZC (89.41%) in 2 h. The values of free energy, and enthalpy were negative; showing spontaneous photodegradation of MR. The kinetics of photodegradation follows pseudo-first-order reaction with rate order of 0.0713 min⁻¹. The HO∗ and O₂∗ were main active species for the photodegradation of MR. The toxicity of NCs calculated and the lethal concentration (LC₅₀) was 113 ppm after 12 h.

Silver nanoparticles instigate physiological, genotoxicity, and ultrastructural anomalies in midgut tissues of beetles

Silver nanoparticles (AgNPs) have long been materials of great interest in numerous fields; however, there is escalating alarm over their toxicity to public health since exposure to these particles is inevitable. This study sheds light on the deleterious impacts of AgNPs on the midgut tissues of beetles (Blaps polychresta) collected from Egypt as a biological model. The investigations were conducted on the beetles administered with a sublethal dose of AgNPs (0.03 mg/g body weight) after 30 days. Oxidative stress parameters and antioxidant enzyme activities were assessed, which exposed critical disruption in the antioxidant defense system of treated beetles. Remarkably, metallothionein (MT) gene expression was significantly increased, while reduced glutathione (GSH) level was notably decreased in midgut tissues subjected to AgNPs. These findings manifestly imply the presence of overproduction in terms of reactive oxygen species (ROS) inside the cells. Additionally, DNA impairment and apoptosis of midgut cells were appraised employing comet and flow cytometry analyses, respectively. The comet results revealed a significant increase in comet cells for the AgNPs treated beetles compared with the control group. Furthermore, the apoptosis results demonstrated a substantial diminution in viable cells with significant growth in apoptotic cells in midgut cells exposed to AgNPs, manifesting their striking correlation with comet and biochemical findings. Noticeably, the histopathological and ultrastructural inspections revealed substantial aberrations in the midgut tissues in the AgNPs treated group, substantiating the previous results. As far as we know, no research has been found that surveyed how the AgNPs at low doses affect the midgut tissues of beetles. Overall, these findings evince the aberrant influences of AgNPs on living organisms.

Life History of Chrysodeixis includens (Lepidoptera: Noctuidae) on Positively Charged Zein Nanoparticles

Research indicates that nanoparticles can be an effective agricultural pest management tool, though unintended effects on the insect must be evaluated before their use in agroecosystems. Chrysodeixis includens (Walker) was used as a model to evaluate chronic parental and generational exposure to empty, positively charged zein nanoparticles ((+)ZNP) and methoxyfenozide-loaded zein nanoparticles (+)ZNP(MFZ) at low-lethal concentrations. To determine concentration limits, an acute toxic response test on meridic diet evaluated (+)ZNP(MFZ) and technical grade methoxyfenozide using two diet assay techniques. No differences in acute toxicity were observed between the two treatments within their respective bioassays. With these results, population dynamics following chronic exposure to low-lethal concentrations were evaluated. Parental lifetables evaluated cohorts of C. includens reared on diet treated with LC5 equivalents of (+)ZNP, (+)ZNP(MFZ), or technical grade methoxyfenozide. Compared to technical grade methoxyfenozide, (+)ZNP(MFZ) lowered both the net reproductive rate and intrinsic rate of increase, and was more deleterious to C. includens throughout its lifespan. This was contrasted to (+)ZNP, which showed no differences in population dynamics when compared with the control. To evaluate chronic exposure to (+)ZNP, generational lifetables reared cohorts of C. includens on LC5 equivalent values of (+)ZNP and then took the resulting offspring to be reared on either (+)ZNP or untreated diet. No differences in lifetable statistics were observed between the two treatments, suggesting that (+)ZNP at low ppm do not induce toxic generational effects. This study provides evidence into the effects of nanodelivered methoxyfenozide and the generational impact of (+)ZNP.

Landscape of lipidomic metabolites in gut-liver axis of Sprague-Dawley rats after oral exposure to titanium dioxide nanoparticles

Background

The application of titanium dioxide nanoparticles (TiO₂ NPs) as food additives poses a risk of oral exposure that may lead to adverse health effects. Even though the substantial evidence supported liver as the target organ of TiO₂ NPs via oral exposure, the mechanism of liver toxicity remains largely unknown. Since the liver is a key organ for lipid metabolism, this study focused on the landscape of lipidomic metabolites in gut-liver axis of Sprague Dawley (SD) rats exposed to TiO₂ NPs at 0, 2, 10, 50 mg/kg body weight per day for 90 days.

Results

TiO₂ NPs (50 mg/kg) caused slight hepatotoxicity and changed lipidomic signatures of main organs or systems in the gut-liver axis including liver, serum and gut. The cluster profile from the above biological samples all pointed to the same key metabolic pathway and metabolites, which was glycerophospholipid metabolism and Phosphatidylcholines (PCs), respectively. In addition, absolute quantitative lipidomics verified the changes of three PCs concentrations, including PC (16:0/20:1), PC (18:0/18:0) and PC (18:2/20:2) in the serum samples after treatment of TiO₂ NPs (50 mg/kg). The contents of malondialdehyde (MDA) in serum and liver increased significantly, which were positively correlated with most differential lipophilic metabolites.

Conclusions

The gut was presumed to be the original site of oxidative stress and disorder of lipid metabolism, which resulted in hepatotoxicity through the gut-liver axis. Lipid peroxidation may be the initial step of lipid metabolism disorder induced by TiO₂ NPs. Most nanomaterials (NMs) have oxidation induction and antibacterial properties, so the toxic pathway revealed in the present study may be primary and universal.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-022-00484-9.

DNA Oxidative Damage as a Sensitive Genetic Endpoint to Detect the Genotoxicity Induced by Titanium Dioxide Nanoparticles

The genotoxicity of nanomaterials has attracted great attention in recent years. As a possible occupational carcinogen, the genotoxic effects and underlying mechanisms of titanium dioxide nanoparticles (TiO2 NPs) have been of particular concern. In this study, the effect of TiO2 NPs (0, 25, 50 and 100 µg/mL) on DNA damage and the role of oxidative stress were investigated using human bronchial epithelial cells (BEAS-2B) as an in vitro model. After detailed characterization, the cytotoxicity of TiO2 NPs was detected. Through transmission electron microscopy (TEM), we found that TiO2 NPs entered the cytoplasm but did not penetrate deep into the nucleus of cells. The intracellular levels of reactive oxygen species (ROS) significantly increased in a dose-dependent manner and the ratios of GSH/GSSG also significantly decreased. The results of the normal comet assay were negative, while the Fpg-modified comet assay that specifically detected DNA oxidative damage was positive. Meanwhile, N-acetyl-L-cysteine (NAC) intervention inhibited the oxidative stress and genotoxicity induced by TiO2 NPs. Therefore, it was suggested that TiO2 NPs could induce cytotoxicity, oxidative stress and DNA oxidative damage in BEAS-2B cells. DNA oxidative damage may be a more sensitive genetic endpoint to detect the genotoxicity of TiO2 NPs.

Importance of Zinc Nanoparticles for the Intestinal Microbiome of Weaned Piglets

The scientific community is closely monitoring the replacement of antibiotics with doses of ZnO in weaned piglets. Since 2022, the use of zinc in medical doses has been banned in the European Union. Therefore, pig farmers are looking for other solutions. Some studies have suggested that zinc nanoparticles might replace ZnO for the prevention of diarrhea in weaning piglets. Like ZnO, zinc nanoparticles are effective against pathogenic microorganisms, e.g., Enterobacteriaceae family in vitro and in vivo. However, the effect on probiotic Lactobacillaceae appears to differ for ZnO and zinc nanoparticles. While ZnO increases their numbers, zinc nanoparticles act in the opposite way. These phenomena have been also confirmed by in vitro studies that reported a strong antimicrobial effect of zinc nanoparticles against Lactobacillales order. Contradictory evidence makes this topic still controversial, however. In addition, zinc nanoparticles vary in their morphology and properties based on the method of their synthesis. This makes it difficult to understand the effect of zinc nanoparticles on the intestinal microbiome. This review is aimed at clarifying many circumstances that may affect the action of nanoparticles on the weaning piglets' microbiome, including a comprehensive overview of the zinc nanoparticles in vitro effects on bacterial species occurring in the digestive tract of weaned piglets.

Role of zinc as an essential microelement for algal growth and concerns about its potential environmental risks

This work aims to measure the role of zinc as an essential micronutrient for algal growth and the effect of using different concentrations of this heavy metal on growth and essential metabolites of Dunaliella tertiolecta. The EC50 obtained was around 15 mg/l. The results obtained proved that lower concentrations of the element increased growth and the content of the measured metabolites (photosynthesis pigments, fatty acids, and protein) but with different responses. The increase in content of these metabolic products with low concentrations of the tested heavy metal may be attributed to inhibition to these metabolites' export out of cells by heavy metals. The obtained infrared peaks of the major cell constituents of the treated cells revealed the emergence of new peaks and the removal of others, indicating changes in cell constituents due to changing zinc concentrations.

Cytotoxicity of Metal-Based Nanoparticles: From Mechanisms and Methods of Evaluation to Pathological Manifestations

Metal-based nanoparticles (NPs) are particularly important tools in tissue engineering-, drug carrier-, interventional therapy-, and biobased technologies. However, their complex and varied migration and transformation pathways, as well as their continuous accumulation in closed biological systems, cause various unpredictable toxic effects that threaten human and ecosystem health. Considerable experimental and theoretical efforts have been made toward understanding these cytotoxic effects, though more research on metal-based NPs integrated with clinical medicine is required. This review summarizes the mechanisms and evaluation methods of cytotoxicity and provides an in-depth analysis of the typical effects generated in the nervous, immune, reproductive, and genetic systems. In addition, the challenges and opportunities are discussed to enhance future investigations on safer metal-based NPs for practical commercial adoption.

Understanding Nanomaterial-Liver Interactions to Facilitate the Development of Safer Nanoapplications

Nanomaterials (NMs) are widely used in commercial and medical products, such as cosmetics, vaccines, and drug carriers. Exposure to NMs via various routes such as dermal, inhalation, and ingestion has been shown to gain access to the systemic circulation, resulting in the accumulation of NMs in the liver. The unique organ structures and blood flow features facilitate the liver sequestration of NMs, which may cause adverse effects in the liver. Currently, most in vivo studies are focused on NMs accumulation at the organ level and evaluation of the gross changes in liver structure and functions, however, cell-type-specific uptake and responses, as well as the molecular mechanisms at cellular levels leading to effects at organ levels are lagging. Herein, the authors systematically review diverse interactions of NMs with the liver, specifically on major liver cell types including Kupffer cells (KCs), liver sinusoidal endothelial cells (LSECs), hepatic stellate cells (HSCs), and hepatocytes as well as the detailed molecular mechanisms involved. In addition, the knowledge gained on nano-liver interactions that can facilitate the development of safer nanoproducts and nanomedicine is also reviewed.

Identifying diverse metal oxide nanomaterials with lethal effects on embryonic zebrafish using machine learning

Manufacturers of nanomaterial-enabled products need models of endpoints that are relevant to human safety to support the "safe by design" paradigm and avoid late-stage attrition. Increasingly, embryonic zebrafish (Danio Rerio) are recognised as a key human safety relevant in vivo test system. Hence, machine learning models were developed for identifying metal oxide nanomaterials causing lethality to embryonic zebrafish up to 24 hours post-fertilisation, or excess lethality in the period of 24-120 hours post-fertilisation, at concentrations of 250 ppm or less. Models were developed using data from the Nanomaterial Biological-Interactions Knowledgebase for a dataset of 44 diverse, coated and uncoated metal or, in one case, metalloid oxide nanomaterials. Different modelling approaches were evaluated using nested cross-validation on this dataset. Models were initially developed for both lethality endpoints using multiple descriptors representing the composition of the core, shell and surface functional groups, as well as particle characteristics. However, interestingly, the 24 hours post-fertilisation data were found to be harder to predict, which could reflect different exposure routes. Hence, subsequent analysis focused on the prediction of excess lethality at 120 hours-post fertilisation. The use of two data augmentation approaches, applied for the first time in nano-QSAR research, was explored, yet both failed to boost predictive performance. Interestingly, it was found that comparable results to those originally obtained using multiple descriptors could be obtained using a model based upon a single, simple descriptor: the Pauling electronegativity of the metal atom. Since it is widely recognised that a variety of intrinsic and extrinsic nanomaterial characteristics contribute to their toxicological effects, this is a surprising finding. This may partly reflect the need to investigate more sophisticated descriptors in future studies. Future studies are also required to examine how robust these modelling results are on truly external data, which were not used to select the single descriptor model. This will require further laboratory work to generate comparable data to those studied herein.

Mechanisms and biological impacts of graphene and multi-walled carbon nanotubes on Drosophila melanogaster: Oxidative stress, genotoxic damage, phenotypic variations, locomotor behavior, parasitoid resistance, and cellular immune response

The use of graphene and multi-walled carbon nanotubes (MWCNTs) has now become rather common in medical applications as well as several other areas thanks to their useful physicochemical properties. While in vitro testing offers some potential, in vivo research into toxic effects of graphene and MWCNTs could yield much more reliable data. Drosophila melanogaster has recently gained significant popularity as a dynamic eukaryotic model in examining toxicity, genotoxicity, and biological effects of exposure to nanomaterials, including oxidative stress, cellular immune response against two strains (NSRef and G486) of parasitoid wasp (Leptopilina boulardi), phenotypic variations, and locomotor behavior risks. D. melanogaster was used as a model organism in our study to identify the potential risks of exposure to graphene (thickness: 2-18 nm) and MWCNTs in different properties (as pure [OD: 10-20 nm short], modified by amide [NH₂ ] [OD: 7-13 nm length: 55 μm], and modified by carboxyl [COOH] [OD: 30-50 nm and length: 0.5-2 μm]) at concentrations ranging from 0.1 to 250 μg/ml. Significant effects were observed at two high doses (100 and 250 μg/ml) of graphene or MWCNTs. This is the first study to report findings of cellular immune response against hematopoiesis and parasitoids, nanogenotoxicity, phenotypic variations, and locomotor behavior in D. melanogaster.

Salivary Leucocytes as In Vitro Model to Evaluate Nanoparticle-Induced DNA Damage

Metal oxide nanoparticles (NPs) have a wide variety of applications in many consumer products and biomedical practices. As a result, human exposure to these nanomaterials is highly frequent, becoming an issue of concern to public health. Recently, human salivary leucocytes have been proposed as an adequate non-invasive alternative to peripheral blood leucocytes to evaluate genotoxicity in vitro. The present study focused on proving the suitability of salivary leucocytes as a biomatrix in the comet assay for in vitro nanogenotoxicity studies, by testing some of the metal oxide NPs most frequently present in consumer products, namely, titanium dioxide (TiO2), zinc oxide (ZnO), and cerium dioxide (CeO2) NPs. Primary and oxidative DNA damage were evaluated by alkaline and hOGG1-modified comet assay, respectively. Any possible interference of the NPs with the methodological procedure or the hOGG1 activity was addressed before performing genotoxicity evaluation. Results obtained showed an increase of both primary and oxidative damage after NPs treatments. These data support the use of salivary leucocytes as a proper and sensitive biological sample for in vitro nanogenotoxicity studies, and contribute to increase the knowledge on the impact of metal oxide NPs on human health, reinforcing the need for a specific regulation of the nanomaterials use.

The genotoxic effects in the leukocytes of workers handling nanocomposite materials

The extensive development of nanotechnologies and nanomaterials poses a number of questions to toxicologists about the potential health risks of exposure to nanoparticles (NP). In this study, we analysed DNA damage in the leukocytes of 20 workers who were long-term exposed (18 ± 10 years) to NP in their working environment. Blood samples were collected in September 2016, before and after a shift, to assess (i) the chronic effects of NP on DNA (pre-shift samples) and (ii) the acute effects of exposure during the shift (the difference between pre- and post-shift samples). The samples from matched controls were taken in parallel with workers before the shift. Leukocytes were isolated from heparinised blood on a Ficoll gradient. The enzyme-modified comet assay (DNA formamido-pyrimidine-glycosylase and endonuclease III) demonstrated a considerable increase of both single- and double-strand breaks in DNA (DNA-SB) and oxidised bases when compared with the controls (2.4× and 2×, respectively). Acute exposure induced a further increase of DNA-SB. The welding and smelting of nanocomposites represented a higher genotoxic risk than milling and grinding of nanocomposite surfaces. Obesity appeared to be a factor contributing to an increased risk of oxidative damage to DNA. The data also indicated a higher susceptibility of males vs. females to NP exposure. The study was repeated in September 2017. The results exhibited similar trend, but the levels of DNA damage in the exposed subjects were lower compared to previous year. This was probably associated with lower exposure to NP in consequence of changes in nanomaterial composition and working operations. The further study involving also monitoring of personal exposures to NP is necessary to identify (i) the main aerosol components responsible for genotoxic effects in workers handling nanocomposites and (ii) the primary cause of gender differences in response to NP action.

Ultrasound and Magnetic Responsive Drug Delivery Systems for Cardiovascular Application

With the increasing insight into molecular mechanisms of cardiovascular disease, a promising solution involves directly delivering genes, cells, and chemicals to the infarcted myocardium or impaired endothelium. However, the limited delivery efficiency after administration fails to reach the therapeutic dose and the adverse off-target effect even causes serious safety concerns. Controlled drug release via external stimuli seems to be a promising method to overcome the drawbacks of conventional drug delivery systems (DDSs). Microbubbles and magnetic nanoparticles responding to ultrasound and magnetic fields respectively have been developed as an important component of novel DDSs. In particular, several attempts have also been made for the design and fabrication of dual-responsive DDS. This review presents the recent advances in the ultrasound and magnetic fields responsive DDSs in cardiovascular application, followed by their current problems and future reformation.

Cytotoxicity and genotoxicity of coated-gold nanoparticles on freshwater algae Pseudokirchneriella subcapitata

Gold engineered nanoparticles (nAu) are increasingly detected in ecosystems, and this raises the need to establish their potential effects on aquatic organisms. Herein, cytotoxic and genotoxic effects of branched polyethylenimine (BPEI)- and citrate (cit)-coated nAu (5, 20, and 40 nm) on algae Pseudokirchneriella subcapitata were evaluated. The apical biological endpoints: growth inhibition and chlorophyll a (Chl a) content were investigated at 62.5-1000 µg/L over 168 h. In addition, the apurinic/apyrimidinic (AP) sites, randomly amplified polymorphic deoxyribonucleic acid (RAPD) profiles, and genomic template stability (GTS) were assessed to determine the genotoxic effects of nAu. The results show algal growth inhibition at 5 nm BPEI-nAu up to 96 h, and thereafter cell recovery except at the highest concentration of 1000 µg/L. Insignificant growth reduction for cit-nAu (all sizes), as well as 20 and 40 nm BPEI-nAu, was observed over 96 h, but growth promotion was apparent at all exposures thereafter except for 40 nm BPEI-nAu at 250 µg/L. A decrease in Chl a content following exposure to 5 nm BPEI-nAu at 1000 µg/L corresponded to significant algal growth reduction. In genotoxicity studies, a significant increase in AP sites content was observed relative to the control - an indication of nAu ability to induce genotoxic effects irrespective of their size and coating type. For 5 nm- and 20 nm-sized nAu for both coating types and exposure concentrations no differences in AP sites content were observed after 72 and 168 h. However, a significant reduction in AP sites was observed following algae exposure to 40 nm-sized nAu (irrespective of coating type and exposure concentration) at 168 h compared to 72 h. Thus, AP sites results at 40 nm-size suggest likely DNA damage recovery over a longer exposure period. The findings on AP sites content showed a good correlation with an increase in genome template stability and growth promotion observed after 168 h. In addition, RAPD profiles demonstrated that nAu can induce DNA damage and/or DNA mutation to P. subcapitata as evidenced by the appearance and/or disappearance of normal bands compared to the controls. Therefore, genotoxicity results revealed significant toxicity of nAu to algae at the molecular level although no apparent effects were detectable at the morphological level. Overall, findings herein indicate that long-term exposure of P. subcapitata to low concentrations of nAu may cause undesirable sub-lethal ecological effects.

Nanoparticles: Weighing the Pros and Cons from an Eco-genotoxicological Perspective

The exponential growth of nanotechnology and the industrial production have raised concerns over its impact on human and environmental health and safety (EHS). Although there has been substantial progress in the assessment of pristine nanoparticle toxicities, their EHS impacts require greater clarification. In this review, we discuss studies that have assessed nanoparticle eco-genotoxicity in different test systems and their fate in the environment as well as the considerable confounding factors that may complicate the results. We highlight key mechanisms of nanoparticle-mediated genotoxicity. Then we discuss the reliability of endpoint assays, such as the comet assay, the most favored assessment technique because of its versatility to measure low levels of DNA strand breakage, and the micronucleus assay, which is complementary to the former because of its greater ability to detect chromosomal DNA fragmentation. We also address the current recommendations on experimental design, including environmentally relevant concentrations and suitable exposure duration to avoid false-positive or -negative results. The genotoxicity of nanoparticles depends on their physicochemical features and the presence of co-pollutants. Thus, the effect of environmental processes (e.g., aggregation and agglomeration, adsorption, and transformation of nanoparticles) would account for when determining the actual genotoxicity relevant to environmental systems, and assay procedures must be standardized. Indeed, the engineered nanoparticles offer potential applications in different fields including biomedicine, environment, agriculture, and industry. Toxicological pathways and the potential risk factors related to genotoxic responses in biological organisms and environments need to be clarified before appropriate and sustainable applications of nanoparticles can be established.

An updated overview on metal nanoparticles toxicity

Although thousands of different nanoparticles (NPs) have been identified and synthesized to date, well-defined, consistent guidelines to control their exposure and evaluate their potential toxicity have yet to be fully established. As potential applications of nanotechnology in numerous fields multiply, there is an increased awareness of the issue of nanomaterials' toxicity among scientists and producers managing them. An updated inventory of customer products containing NPs estimates that they currently number over 5.000; ten years ago, they were one fifth of this. More often than not, products bear no information regarding the presence of NPs in the indicated list of ingredients or components. Consumers are therefore largely unaware of the extent to which nanomaterials have entered our lives, let alone their potential risks. Moreover, the lack of certainties with regard to the safe use of NPs is curbing their applications in the biomedical field, especially in the diagnosis and treatment of cancer, where they are performing outstandingly but are not yet being exploited as much as they could. The production of radical oxygen species is a predominant mechanism leading to metal NPs-driven carcinogenesis. The release of particularly reactive metal ions capable of crossing cell membranes has also been implicated in NPs toxicity. In this review we discuss the origin, behavior and biological toxicity of different metal NPs with the aim of rationalizing related health hazards and calling attention to toxicological concerns involved in their increasingly widespread use.

A harmonized and standardized in vitro approach produces reliable results on silver nanoparticles toxicity in different cell lines

Despite the widespread use of silver nanoparticles (AgNPs) in different fields and the amount of investigations available, to date, there are many contradictory results on their potential toxicity. In the present study, extensively characterized 20-nm AgNPs were investigated using optimized protocols and standardized methods to test several toxicological endpoints in different cell lines. The agglomeration/aggregation state of AgNPs in culture media was measured by dynamic light scattering (DLS). DNA and chromosomal damage on BEAS-2B and RAW 264.7 cells were evaluated by comet and micronucleus assays, while oxidative DNA damage by modified comet assay and 8-oxodG/8-oxodA detection. We also investigated immunotoxicity and immunomodulation by cytokine release and NO production in RAW 264.7 and MH-S cells, with or without lipopolysaccharide (LPS) stimulus. Transmission electron microscope (TEM) analysis was used to analyze cellular uptake of AgNPs. Our results indicate different values of AgNPs hydrodynamic diameter depending on the medium, some genotoxic effect just on BEAS-2B and no or slight effects on function of RAW 264.7 and MH-S in absence or presence of LPS stimulus. This study highlights the relevance of using optimized protocols and multiple endpoints to analyze the potential toxicity of AgNPs and to obtain reliable and comparable results.

Metabolomics screening of serum biomarkers for occupational exposure of titanium dioxide nanoparticles

Although nanotoxicology studies have shown that respiratory exposure of titanium dioxide nanoparticles (TiO₂ NPs) could induce adverse health effects, limited biomarkers associated with occupational exposure of TiO₂ NPs were reported. The purpose of this study is to screen serum biomarkers among workers occupationally exposed to TiO₂ NPs using metabolomics. Compared with the control group, a total of 296 serum metabolites were differentially expressed in the TiO₂ NPs-exposed group, of which the relative expression of 265 metabolites increased, and the remaining 31 decreased. Three machine learning methods including random forest (RF), support vector machines (SVM), and boruta screened eight potential biomarkers and simultaneously selected a metabolite, Liquoric acid. Through multiple linear regression analysis to adjust the influence of confounding factors such as gender, age, BMI, smoking and drinking, occupational exposure to TiO₂ NPs was significantly related to the relative expression of the eight potential biomarkers. Meanwhile, the receiver operating characteristic curves (ROCs) of these potential biomarkers had good sensitivity and specificity. These potential biomarkers were related to lipid peroxidation, and had biological basis for occupational exposure to TiO₂ NPs. Therefore, it was demonstrated that the serum metabolites represented by Liquoric acid were good biomarkers of occupational exposure to TiO₂ NPs.

A critical review on genotoxicity potential of low dimensional nanomaterials

Low dimensional nanomaterials (LDNMs) have earned attention among researchers as they exhibit a larger surface area to volume and quantum confinement effect compared to high dimensional nanomaterials. LDNMs, including 0-D and 1-D, possess several beneficial biomedical properties such as bioimaging, sensor, cosmetic, drug delivery, and cancer tumors ablation. However, they threaten human beings with the adverse effects of cytotoxicity, carcinogenicity, and genotoxicity when exposed for a prolonged time in industry or laboratory. Among different toxicities, genotoxicity must be taken into consideration with utmost importance as they inherit DNA related disorders causing congenital disabilities and malignancy to human beings. Many researchers have performed NMs' genotoxicity using various cell lines and animal models and reported the effect on various physicochemical and biological factors. In the present work, we have compiled a comparative study on the genotoxicity of the same or different kinds of NMs. Notwithstanding, we have included the classification of genotoxicity, mechanism, assessment, and affecting factors. Further, we have highlighted the importance of studying the genotoxicity of LDNMs and signified the perceptions, future challenges, and possible directives in the field.

NanoTox: Development of a Parsimonious In Silico Model for Toxicity Assessment of Metal-Oxide Nanoparticles Using Physicochemical Features

Metal-oxide nanoparticles find widespread applications in mundane life today, and cost-effective evaluation of their cytotoxicity and ecotoxicity is essential for sustainable progress. Machine learning models use existing experimental data and learn quantitative feature-toxicity relationships to yield predictive models. In this work, we adopted a principled approach to this problem by formulating a novel feature space based on intrinsic and extrinsic physicochemical properties, including periodic table properties but exclusive of in vitro characteristics such as cell line, cell type, and assay method. An optimal hypothesis space was developed by applying variance inflation analysis to the correlation structure of the features. Consequent to a stratified train-test split, the training dataset was balanced for the toxic outcomes and a mapping was then achieved from the normalized feature space to the toxicity class using various hyperparameter-tuned machine learning models, namely, logistic regression, random forest, support vector machines, and neural networks. Evaluation on an unseen test set yielded >96% balanced accuracy for the random forest, and neural network with one-hidden-layer models. The obtained cytotoxicity models are parsimonious, with intelligible inputs, and an embedded applicability check. Interpretability investigations of the models identified the key predictor variables of metal-oxide nanoparticle cytotoxicity. Our models could be applied on new, untested oxides, using a majority-voting ensemble classifier, NanoTox, that incorporates the best of the above models. NanoTox is the first open-source nanotoxicology pipeline, freely available under the GNU General Public License (https://github.com/NanoTox).

Adverse Outcome Pathway Development for Assessment of Lung Carcinogenicity by Nanoparticles

Lung cancer, one of the most common and deadly forms of cancer, is in some cases associated with exposure to certain types of particles. With the rise of nanotechnology, there is concern that some engineered nanoparticles may be among such particles. In the absence of epidemiological evidence, assessment of nanoparticle carcinogenicity is currently performed on a time-consuming case-by-case basis, relying mainly on animal experiments. Non-animal alternatives exist, including a few validated cell-based methods accepted for regulatory risk assessment of nanoparticles. Furthermore, new approach methodologies (NAMs), focused on carcinogenic mechanisms and capable of handling the increasing numbers of nanoparticles, have been developed. However, such alternative methods are mainly applied as weight-of-evidence linked to generally required animal data, since challenges remain regarding interpretation of the results. These challenges may be more easily overcome by the novel Adverse Outcome Pathway (AOP) framework, which provides a basis for validation and uptake of alternative mechanism-focused methods in risk assessment. Here, we propose an AOP for lung cancer induced by nanosized foreign matter, anchored to a selection of 18 standardized methods and NAMs for in silico- and in vitro-based integrated assessment of lung carcinogenicity. The potential for further refinement of the AOP and its components is discussed in relation to available nanosafety knowledge and data. Overall, this perspective provides a basis for development of AOP-aligned alternative methods-based integrated testing strategies for assessment of nanoparticle-induced lung cancer.

Therapeutic nanostructures and nanotoxicity

Nanotechnology, with its continuous advancement, leads to the development of nanoscale-level therapeutics to mitigate many complex diseases. This results in the emergence of numerous novel nanomaterials and its composite products into the market such as liposome, polymeric nanoparticles, dendrimers, and nanostructured lipid carrier. However, their application is always determined by a high benefit to risk ratio. Very few research have been done on the toxicity assessment of nanoparticles in the biological system; therefore, the limited knowledge regarding the toxicity profile of nanotherapeutics is available leading to the ignorance of its side effects. Nanoparticles can distribute in the whole body through translocating in the bloodstream by crossing membrane barriers efficiently and shows effect in organs and tissues at cellular and molecular levels. The interaction of nanoparticle with cell may consequences into nanotoxicity. The narrow size distribution, large surface area to mass ratio and surface properties of nanoparticle are significantly associated with nanotoxicity. Nanoparticles can enter into the tissue and cell by invading the membranes and cause cellular injury as well as toxicity. Therefore, the exploration of mechanisms of nanotoxicity has prime importance now a day. The toxicity assessment should be an integral part of the development of nanotherapeutics using various toxicity evaluation models. This review has focused on the exploration of different nanostructures for therapeutic delivery system along with its physicochemical characteristics responsible for adverse effects on human biology, various toxicity evaluation models, and environmental and regulatory hurdles.

Nano-scaled materials may induce severe neurotoxicity upon chronic exposure to brain tissues: A critical appraisal and recent updates on predisposing factors, underlying mechanism, and future prospects

Owing to their tremendous potential, the inference of nano-scaled materials has revolutionized many fields including the medicine and health, particularly for development of various types of targeted drug delivery devices for early prognosis and successful treatment of various diseases, including the brain disorders. Owing to their unique characteristic features, a variety of nanomaterials (particularly, ultra-fine particles (UFPs) have shown tremendous success in achieving the prognostic and therapeutic goals for early prognosis and treatment of various brain maladies such as Alzheimer's disease, Parkinson's disease, brain lymphomas, and other ailments. However, serious attention is needful due to innumerable after-effects of the nanomaterials. Despite their immense contribution in optimizing the prognostic and therapeutic modalities, biological interaction of nanomaterials with various body tissues may produce severe nanotoxicity of different organs including the heart, liver, kidney, lungs, immune system, gastro-intestinal system, skin as well as nervous system. However, in this review, we have primarily focused on nanomaterials-induced neurotoxicity of the brain. Following their translocation into different regions of the brain, nanomaterials may induce neurotoxicity through multiple mechanisms including the oxidative stress, DNA damage, lysosomal dysfunction, inflammatory cascade, apoptosis, genotoxicity, and ultimately necrosis of neuronal cells. Our findings indicated that rigorous toxicological evaluations must be carried out prior to clinical translation of nanomaterials-based formulations to avoid serious neurotoxic complications, which may further lead to develop various neuro-degenerative disorders.

A review on nanotoxicity and nanogenotoxicity of different shapes of nanomaterials

Nanomaterials (NMs) generally display fascinating physical and chemical properties that are not always present in bulk materials; therefore, any modification to their size, shape, or coating tends to cause significant changes in their chemical/physical and biological characteristics. The dramatic increase in efforts to use NMs renders the risk assessment of their toxicity highly crucial due to the possible health perils of this relatively uncharted territory. The different sizes and shapes of the nanoparticles are known to have an impact on organisms and an important place in clinical applications. The shape of nanoparticles, namely, whether they are rods, wires, or spheres, is a particularly critical parameter to affect cell uptake and site-specific drug delivery, representing a significant factor in determining the potency and magnitude of the effect. This review, therefore, intends to offer a picture of research into the toxicity of different shapes (nanorods, nanowires, and nanospheres) of NMs to in vitro and in vivo models, presenting an in-depth analysis of health risks associated with exposure to such nanostructures and benefits achieved by using certain model organisms in genotoxicity testing. Nanotoxicity experiments use various models and tests, such as cell cultures, cores, shells, and coating materials. This review article also attempts to raise awareness about practical applications of NMs in different shapes in biology, to evaluate their potential genotoxicity, and to suggest approaches to explain underlying mechanisms of their toxicity and genotoxicity depending on nanoparticle shape.

Drosophila as a model for assessing nanopesticide toxicity

One of the fastest-moving fields in today's world of applied science, nanotechnology allows the control and design of matter on an extremely small scale, so it has now become an integral part of various industries and scientific areas, such as agriculture, food sector, healthcare and engineering. Understanding the interactions between nanopesticides and edible plants, as well as non-target animals, is crucial in assessing the potential impact of nanotechnology products on the environment, agriculture and human health. The dramatic increase in efforts to use nanopesticides renders the risk assessment of their toxicity and genotoxicity highly crucial due to the potential adverse impact of this relatively uncharted territory. Such widespread use naturally increases our exposure to nanopesticides, raising concerns over their possible adverse effects on humans and non-target organisms, which might include severe impairment of both male and female reproductive capacity. We therefore need better insight into such effects to derive conclusive evidence on the safety or toxicity/genotoxicity of nanopesticides, and Drosophila melanogaster (fruit fly) can prove an ideal model organism for the risk assessment and toxicological classification of nanopesticides, as it bears striking similarities to various systems in human body. This editorial review attempts to summarize our current knowledge derived from previous in vivo studies to examine the impact of several nanomaterials on various species of mammals and non-target model organisms at the genetic, cellular, and molecular levels, attracting attention to the possible mechanisms and potential toxic/genotoxic effects of nanopesticides widely used in agriculture on D. melanogaster as a non-target organism.

Toxic impacts and industrial potential of graphene

Advancement in the field of nanotechnology has increased the synthesis and exploitation of graphene-like nanomaterials. Graphene is a two-dimensional planar and hexagonal array of carbon atoms. Due to its flexible nature graphene and its derivatives have several significant prospects extending from electronics to life sciences and drug delivery systems. In this review, we enlist some of the toxic effects of graphene family nanomaterials (GFNs) in various aspects of biosystems viz., in vitro, in vivo, microbial, molecular and environmental. We also appreciate their extensive and promising applications though with some underlying challenges. This review also draws attention toward current and future prospect of global graphene market for wide-range commercialization.