Visual Detection of LPS at the Femtomolar Level Based on Click Chemistry-Induced Gold Nanoparticles Electrokinetic Accumulation

Lipopolysaccharide (LPS) presents a significant threat to human health. Herein, a novel method for detecting LPS was developed by coupling hybridization chain reaction (HCR), gold nanoparticles (AuNPs) agglutination (AA) triggered by a Cu(I)-catalyzed azide-alkyne cycloaddition click chemistry (CuAAC), and electrokinetic accumulation (EA) in a microfluidic chip, termed the HCR-AA-EA method. Thereinto, the LPS-binding aptamer (LBA) was coupled with the AuNP-coated Fe3O4 nanoparticle, which was connected with the polymer of H1 capped on CuO (H1-CuO) and H2-CuO. Upon LPS recognition by LBA, the polymers of H1- and H2-CuO were released into the solution, creating a "one LPS-multiple CuO" effect. Under ascorbic acid reduction, CuAAC was initiated between the alkyne and azide groups on the AuNPs' surface; then, the product was observed visually in the microchannel by EA. Finally, LPS was quantified by the integrated density of AuNP aggregates. The limit of detections were 29.9 and 127.2 fM for water samples and serum samples, respectively. The levels of LPS in the injections and serum samples by our method had a good correlation with those from the limulus amebocyte lysate test (r = 0.99), indicating high accuracy. Remarkably, to popularize our method, a low-cost, wall-power-free portable device was developed, enabling point-of-care testing.

Ultrasensitive colorimetric detection of Staphylococcus aureus using wheat germ agglutinin and IgY as a dual-recognition strategy

A novel colorimetric platform was designed for the determination of S. aureus by utilizing a dual-recognition strategy, where wheat germ agglutinin (WGA)-functionalized magnetic beads were served as separation elements to capture and enrich S. aureus efficiently from the matrix. Horseradish peroxidase (HRP) labeled chicken anti-protein A IgY (HRP-IgY) was used to label the captured S. aureus. A chicken IgY was introduced as a signal tracer to bind with staphylococcal protein A (SPA) on the surface of S. aureus, which can circumvent the interference from protein G-producing Streptococcus. Subsequently, the colorimetric signal was achieved by an HRP-catalyzed reaction, which was amplified by HRP-IgY bound by approximately 80,000 SPA molecules on one S. aureus. The entire detection process could be accomplished within 90 min. Under optimal conditions, the linear response of different S. aureus concentrations ranged from 7.8 × 102 to 2.0 × 105 CFU/mL and the limit of detection reached down to 3.9 × 102 CFU/mL. Some common non-target bacteria yielded negative results, indicating the excellent specificity of the method. The developed strategy was successfully applied to the determination of S. aureus in various types of samples with satisfactory recoveries. Therefore, the novel dual-recognition strategy possessed the advantages of high sensitivity, specificity, and low cost and exhibited considerable potential as a promising tool to defend public health.

Integrated label-free erbium-doped fiber laser biosensing system for detection of single cell Staphylococcus aureus

A critical challenge to realize ultra-high sensitivity with optical fiber interferometers for label free biosensing is to achieve high quality factors (Q-factor) in liquid. In this work a high Q-factor of 10⁵, which significantly improves the detection resolution is described based on a structure of single mode -core-only -single mode fiber (SCS) with its multimode (or Mach-Zehnder) interference effect as a filter that is integrated into an erbium-doped fiber laser (EDFL) system for excitation. In the case study, the section of core-only fiber is functionalized with porcine immunoglobulin G (IgG) antibodies, which could selectively bind to bacterial pathogen of Staphylococcus aureus (S. aureus). The developed microfiber-based biosensing platform called SCS-based EDFL biosensors can effectively detect concentrations of S. aureus from 10 to 10⁵ CFU/mL, with a responsivity of 0.426 nm wavelength shift in the measured spectrum for S. aureus concentration of 10 CFU/mL. The limit of detection (LoD) is estimated as 7.3 CFU/mL based on the measurement of S. aureus with minimum concentration of 10 CFU/mL. In addition, when a lower concentration of 1 CFU/mL is applied to the biosensor, a wavelength shift of 0.12 nm is observed in 10% of samples (1/10), indicating actual LoD of 1 CFU/mL for the proposed biosensor. Attributed to its good sensitivity, stability, reproducibility and specificity, the proposed EDFL based biosensing platform has great potentials for diagnostics.

Simultaneous detection of foodborne pathogenic bacteria in milk by fluorescence immunoassay

Rapid, sensitive and simultaneous detection of multiple bacteria in foodborne is still a major challenge in public health field. Here, a fluorescence immunoassay that can achieve high-throughput detection of three Gram-positive foodborne pathogenic bacteria simultaneously was proposed. Vancomycin and bovine serum albumin conjugate (Van-BSA) was immobilized on a polycarbonate chip to capture three Gram-positive foodborne pathogenic bacteria, Staphylococcus aureus (S. aureus), Bacillus cereus (B. cereus) and Listeria monocytogenes (L. monocytogenes). CdSe/ZnS quantum dot modified antibodies (Ab-QD) were prepared by carbodiimide coupling chemistry. Due to the affinity reaction between antibodies and proteins on the bacterial surface, the simultaneous detection of multiple Gram-positive bacteria was achieved by monitoring the fluorescence signal of quantum dot by a portable microfluidic chip analyzer. Under optimal conditions, low detection limits was 18 CFU/well, 3 CFU/well and 36 CFU/well for S. aureus, B. cereus and L. monocytogenes, respectively. With satisfactory accuracy and precision, the proposed fluorescence immunoassay holds good prospects to detect pathogens in real food samples.

Antibiotic and mammal IgG based lateral flow assay for simple and sensitive detection of Staphylococcus aureus

Lateral flow assay (LFA), performed with simple devices and short detection time, is popular in field applications. Herein, a novel sandwich type-based LFA was constructed for high sensitivity and selectivity detection of Staphylococcus aureus (S. aureus). Vancomycin-immobilized gold nanoparticles (VAN-Au NPs) were utilized as the first identifier to capture S. aureus and the specificity was guaranteed by the second recognition agent of pig immunoglobulin G (IgG). In addition, gold growth was adopted for signal amplification to further improve the detection sensitivity. S. aureus could be directly assayed by this LFA within the concentration range of 1.0 × 10³-1.0 × 10⁸ cfu mL^-1 with a detection limit of 1.0 × 10³ cfu mL^-1. Furthermore, the novel sandwich LFA realized S. aureus detection in food samples with admissible recoveries and established a rapid, simple, cost-effective and sensitive platform, could meet the demand for on-site testing of S. aureus.

Bacterial Detection and Elimination Using a Dual-Functional Porphyrin-Based Porous Organic Polymer with Peroxidase-Like and High Near-Infrared-Light-Enhanced Antibacterial Activity

The efficient fabrication of multifunctional nanoplatforms for bacterial detection and elimination is of great importance in nanobiotechnology. A new porphyrin-based porous organic polymer, FePPOP_BFPB, was synthesized via the reaction between pyrrole and 4-{2,2-bis[(4-formylphenoxy)methyl]-3-(4-formylphenoxy) propoxy} benzaldehyde (BFPB). The C-centric tetrahedral structure of BFPB promoted the formation of FePPOP_BFPB with a 3D interconnected porous structure, high specific surface area, and plentiful surface catalytic active sites. The adjustable structural alkyl chain also enhanced the absorption capability of FePPOP_BFPB in the long-wavelength visible and near-infrared regions (NIR). FePPOP_BFPB exhibited excellent peroxidase-like activity toward a representative peroxidase substrate, 3,3',5,5'-tetramethylbenzidine (TMB) with H₂O₂. Utilizing these features, a rapid and visual detection of Staphylococcus aureus (S. aureus) based on FePPOP_BFPB was established and exhibited high sensitivity and stability. Combining the catalysis with near-infrared-light (NIR) absorption, FePPOP_BFPB can effectively catalyze the decomposition of biologically relevant concentrations of H₂O₂ to produce vast amounts of •OH radicals via the photo-Fenton reaction, which avoids the utilization of high toxic concentrations of H₂O₂. On the basis of these satisfactory features, FePPOP_BFPB had a conspicuous bactericidal performance against S. aureus under NIR irradiation. To our knowledge, this is the first example of a porphyrin-based porous organic polymer antibacterial agent. The main reactive oxygen species (ROS) produced in this system and the possible antibacterial mechanism of FePPOP_BFPB was also proposed through a series of experiments.

Ultrasensitive and selective detection of Staphylococcus aureus using a novel IgY-based colorimetric platform

To develop a specific method for the detection of S. aureus, chicken anti-protein A IgY was adopted for specifically capturing S. aureus, depending on the specific recognition of staphylococcal protein A (SPA) by chicken anti-protein A IgY, which can eliminate the interference from protein G-producing Streptococcus. HRP labeled IgG, Fc region of which has a high affinity towards SPA, was paired with IgY for the colorimeter analysis of the system. By optimizing the system, a super-low detection limit of 11 CFU of S. aureus in 100 μL PBS without enrichment, with a linear range from 5.0 × 10² CFU mL^-1 to 5.0 × 10⁴ CFU mL^-1 was obtained. The entire assay was accomplished in less than 90 min and no cross-reactivity with the other tested bacterial species was observed. Moreover, the developed assay has been applied for the detection of S. aureus in three different types of real samples (sodium chloride injection, apple juice and human urine) with satisfactory results. To the best of our knowledge, it is the first time to report using chicken anti-protein A IgY and any IgG to detect S. aureus based on the dual-recognition mode of SPA. The novel method opened up a way for monitoring S. aureus in food samples with high sensitivity, specificity and simple operation.

Simultaneous Sensing of Seven Pathogenic Bacteria by Guanidine-Functionalized Upconversion Fluorescent Nanoparticles

The method capable of simultaneously detecting multiple target bacterial pathogens is necessary and of great interest. In this research, we demonstrated our initial effort to simultaneously detect seven common foodborne bacteria by developing a straightforward upconversion fluorescence sensing approach. The fluorescent nanosensor was constructed from a designed guanidine-functionalized upconversion fluorescent nanoparticles (UCNPs@GDN), tannic acid, and hydrogen peroxide (HP) and could quantify pathogenic bacteria in a nonspecific manner because the luminescence of the upconversion fluorescent nanoparticle was effectively strengthened in the presence of bacteria. When the developed nanosensor was applied to quantify multiple bacteria including Escherichia coli, Salmonella, Cronobacter sakazakii, Shigella flexneri, Vibrio parahaemolyticus, Staphylococcus aureus, and Listeria monocytogenes, a linear range of 10³ to 10⁸ cfu mL^-1 and a detection limit of 1.30 × 10² cfu mL^-1 have been obtained for the seven model mixture bacteria. In addition, the similar linear range and detection limit were also obtained for the detection of single bacteria. The present approach also exhibited acceptable recovery values ranging from 70.0 to 118.2% for bacteria in real samples (water, milk, and beef). All these results suggested that the guanidine-functionalized upconversion fluorescent nanosensor could be considered as a promising candidate for the rapid detection and surveillance of microbial pollutants in food and water.

Femtomolar Detection of Lipopolysaccharide in Injectables and Serum Samples Using Aptamer-Coupled Reduced Graphene Oxide in a Continuous Injection-Electrostacking Biochip

A method for microfluidic sample preconcentration to detect femtomolar level of lipopolysaccharide (LPS) is introduced, enabled by 6-carboxyfluorescein (6-FAM) labeled aptamer-LPS binding along with reduced graphene oxide (rGO). The free FAM-aptamers can be adsorbed onto the surface of rGO, resulting in fluorescence quenching of background signals. Conversely, the aptamer-LPS complex cannot be adsorbed by rGO, so the fluorescence is maintained and detected. When an electric field is applied across the microchannel with Nafion membrane in the chip, only the fluorescence of aptamer-LPS complex can be detected and stacked by continuous injection-electrostacking (CI-ES). The method shows a high selectivity (in the presence of pyrophosphate, FAD⁺, NAD⁺, AMP, ADP, ATP, phosphatidylcholine, LTA, and β-d-glucans which respond positively to LAL) to LPS and an extreme sensitivity with the limit of detection (LOD) at 7.9 fM (7.9 × 10^-4 EU/mL) and 8.3 fM (8.3 × 10^-4 EU/mL) for water sample and serum sample, respectively. As a practical application, this method can detect LPS in injections and serum samples of human and sepsis model mouse and quickly distinguish Gram-negative bacteria Escherichia coli ( E. coli) from Gram-positive bacteria Staphylococcus aureus ( S. aureus) and fungus Candida albicans ( C. albicans). More importantly, by changing the aptamers based on different targets, we can detect different analytes. Therefore, aptamer-coupled rGO in a CI-ES biochip is a universal, sensitive, and specific method. For TOC only.

A novel colorimetric sensing platform for the detection ofS. aureuswith high sensitivity and specificity

In this study, a novel colorimetric sensing platform was developed for the detection of S. aureus using dog immunoglobulin G (IgG) as the capture antibody and chicken anti-protein A immunoglobulin Y labeled with horseradish peroxidase (HRP-IgY) as the detection antibody. Dog IgG labeled with magnetic beads was used to capture S. aureus through the interaction between the Fc region of dog IgG and Staphylococcal protein A (SPA). HRP-IgY was introduced to recognize the residual SPA on the surface of S. aureus and to create a sandwich format, after which a soluble 3,3′,5,5′-tetramethylbenzidine (TMB) substrate was added. A stop solution was utilized to cease the enzymatic chromogenic reaction, and then optical density was read at 450 nm. Under optimal conditions, the proposed method displayed a low detection limit of 1.0 × 10³ CFU mL⁻¹ and a wide linear range of 3.1 × 10³ to 2.0 × 10⁵ CFU mL⁻¹. This detection method exhibited high specificity against other foodborne bacteria. The recovery rates ranged from 95.2% to 129.2%. To our knowledge, this is the first report to employ dog IgG and chicken IgY as an antibody pair to detect S. aureus. This technique exhibits high application potential for S. aureus monitoring in various kinds of samples.

Utilization of dog IgG and chicken anti-protein A IgY as an antibody pair for sensitive and selective detection of S. aureus.

Gold-copper nanoshell dot-blot immunoassay for naked-eye sensitive detection of tuberculosis specific CFP-10 antigen

Herein, a straightforward and highly specific dot-blot immunoassay was successfully developed for the detection of Mycobacterium tuberculosis antigen (10 kDa culture filtrate protein, CFP-10) via the formation of copper nanoshell on the gold nanoparticles (AuNPs) surface. The principle of dot-blot immunoassay was based on the reduction of Cu²⁺ ion on the GBP-CFP10G2-AuNPs conjugates, which has gold binding and antigen binding affinities, simultaneously, favouring to appear red dot that can be observed with naked-eye. The dot intensity is proportional to the concentration of tuberculosis antigen CFP-10, which offers a detection limit of 7.6 pg/mL. The analytical performance of GBP-CFP10G2-AuNPs-copper nanoshell dot-blot was superior than that of conventional silver nanoshell. This method was successfully applied to identify the CFP-10 antigen in the clinical urine sample with high sensitivity, specificity, and minimized sample preparation steps. This method exhibits great application potential in the field of nanomedical science for highly reliable point-of-care detection of CFP-10 antigen in real samples to early diagnosis of tuberculosis.

On the challenges of detecting whole Staphylococcus aureus cells with biosensors

Due to the increasing number of nosocomial infections and multidrug-resistant bacterial strains, Staphylococcus aureus is now a major worldwide concern. Rapid detection and characterization of this bacterium has become an important issue for biomedical applications. Biosensors are increasingly appearing as low-cost, easy-to-operate and fast alternatives for rapid detection. In this review, we will introduce the main characteristics of S. aureus and will focus on the interest of biosensors for a faster detection of whole S. aureus cells. In particular, we will review the most promising strategies in the choice of ligand for the design of selective and efficient biosensors. Their specific characteristics as well as their advantages and/or disadvantages will also be commented.

Sensitive Detection of Staphylococcus aureus with Vancomycin-Conjugated Magnetic Beads as Enrichment Carriers Combined with Flow Cytometry

A novel sandwich strategy was designed to detect Staphylococcus aureus. The strategy is based on an antibacterial agent that captures bacterial cells and a fluorescein-labeled antibody that acts as the signal-output probe. Vancomycin (Van), which exerts a strong antibacterial effect on Gram-positive bacteria, was utilized as a molecular recognition agent to detect pathogenic bacteria. To effectively concentrate S. aureus, we used bovine serum albumin (BSA) as the amplification carrier to modify magnetic beads (MBs), which were then functionalized with Van. To improve the specificity of the method for S. aureus detection, we adopted fluorescein isothiocyanate (FITC)-tagged pig immunoglobulin G (FITC-pig IgG) as the signal probe and the second recognition agent that bound between the Fc fragment of pig IgG and protein A in the surface of S. aureus. To quantify S. aureus, we measured the fluorescence signal by flow cytometry (FCM). The use of multivalent magnetic nanoprobes (Van-BSA-MBs) showed a high concentration efficiency (>98%) at bacterial concentrations of only 33 colony-forming units (CFU)/mL. Furthermore, the sandwich mode (FITC-pig IgG/SA/Van-BSA-MBs) also showed ideal specificity because Van and IgG bound with S. aureus at two distinct sites. The detection limit for S. aureus was 3.3 × 10¹ CFU/mL and the total detection process could be completed within 120 min. Other Gram-positive bacteria and Gram-negative bacteria, including Listeria monocytogenes, Bacillus cereus, Cronobacter sakazakii, Escherichia coli O157:H7, and Salmonella Enteritidis, negligibly interfered with S. aureus detection. The proposed detection strategy for S. aureus possesses attractive characteristics, such as high sensitivity, simple operation, short testing time, and low cost.

Combining phagomagnetic separation with immunoassay for specific, fast and sensitive detection of Staphylococcus aureus

A Staphylococcus aureus (S. aureus)-specific lytic bacteriophage P-S. aureus-9, isolated from an environmental water sample, was assembled on magnetic beads for capturing S. aureus from samples through magnetic separation. Horseradish Peroxidase (HRP) labeled immunoglobulin (IgG) antibodies were used to detect the captured S. aureus by reacting with protein A on S. aureus followed by colorimetric signals, which were generated from the catalytic reaction between HRP and the substrate 3,3',5,5'-Tetramethylbenzidine (TMB). Under optimal conditions, the calibration curve was linear from 1.0×10⁴ to 1.0×10⁶CFUmL^-1. The limit of detection (LOD) for the assay was 2.47×10³CFUmL^-1 and 8.86×10³CFUmL^-1 of S. aureus in PBS and apple juice, respectively. Moreover, the whole assay revealed outstanding specificity towards S. aureus, without any interference of common pathogenic bacteria, and can be completed within 90min without any pre-enrichment. As far as known, it was the first time to detect S. aureus based on the double site recognition of bacteriophage and mammal IgG. The novel approach has shown good potentials for a rapid, specific, cheap and simple detection of S. aureus in food samples.

An enhanced chemiluminescence resonance energy transfer aptasensor based on rolling circle amplification and WS2 nanosheet for Staphylococcus aureus detection

A chemiluminescence resonance energy transfer aptasensor was fabricated for the detection of Staphylococcus aureus (S. aureus) with Co²⁺ enhanced N-(aminobutyl)-N-(ethylisoluminol) (ABEI) functional flowerlike gold nanoparticles (Co²⁺/ABEI-AuNFs) as donor and WS₂ nanosheet as acceptor. In the presence of S. aureus, rolling circle amplification (RCA) can be started. Partially complementary sequence of RCA product functional ABEI-AuNFs (cDNA-ABEI-AuNFs) were then annealed to multiple sites of the RCA product to form duplex complex. This complex is less adsorbed onto the WS₂ nanosheet, thus attenuating the quenching of ABEI-AuNFs chemiluminescence by WS₂ nanosheet. In the absence of target S. aureus (and hence the absence of RCA and duplex formation), the free cDNA-ABEI-AuNFs is completely adsorbed onto the WS₂ nanosheet and chemiluminescence quenching ensues. Under optimal conditions, the logarithmic correlation between the concentration of S. aureus and the CL signal was found to be linear within the range of 50 cfu/mL to 1.5 × 10⁵ cfu/mL (R² = 0.9913). The limits of detection of the developed method were found to be 15 cfu/mL for S. aureus. The selectivity and the capability of the biosensor in meat samples were also studied. Therefore, this simple and easy operation method can be used to detect S. aureus with high sensitivity and specificity.

Self-enhanced targeted delivery of a cell wall- and membrane-active antibiotics, daptomycin, against staphylococcal pneumonia

Considering that some antibacterial agents can identify the outer structure of pathogens like cell wall and/or cell membrane, we explored a self-enhanced targeted delivery strategy by which a small amount of the antibiotic molecules were modified on the surface of carriers as targeting ligands of certain bacteria while more antibiotic molecules were loaded inside the carriers, and thus has the potential to improve the drug concentration at the infection site, enhance efficacy and reduce potential toxicity. In this study, a novel targeted delivery system against methicillin-resistant Staphylococcus aureus (MRSA) pneumonia was constructed with daptomycin, a lipopeptide antibiotic, which can bind to the cell wall of S. aureus via its hydrophobic tail. Daptomycin was conjugated with N-hydroxysuccinimidyl–polyethylene glycol–1,2-distearoyl-sn-glycero-3-phosphoethanolamine to synthesize a targeting compound (Dapt–PEG–DSPE) which could be anchored on the surface of liposomes, while additional daptomycin molecules were encapsulated inside the liposomes. These daptomycin-modified, daptomycin-loaded liposomes (DPD-L[D]) showed specific binding to MRSA as detected by flow cytometry and good targeting capabilities in vivo to MRSA-infected lungs in a pneumonia model. DPD-L[D] exhibited more favorable antibacterial efficacy against MRSA than conventional PEGylated liposomal daptomycin both in vitro and in vivo. Our study demonstrates that daptomycin-modified liposomes can enhance MRSA-targeted delivery of encapsulated antibiotic, suggesting a novel drug delivery approach for existing antimicrobial agents.

Rapid and visual detection of Listeria monocytogenes based on nanoparticle cluster catalyzed signal amplification

Foodborne pathogens pose a significant threat to human health worldwide. The identification of foodborne pathogens needs to be rapid, accurate and convenient. Here, we constructed a nanoparticle cluster (NPC) catalyzed signal amplification biosensor for foodborne pathogens visual detection. In this work, vancomycin (Van), a glycopeptide antibiotic for Gram-positive bacteria, was used as the first molecular recognition agent to capture Listeria monocytogenes (L. monocytogenes). Fe3O4 NPC modified aptamer, was used as the signal amplification nanoprobe, specifically recognize to the cell wall of L. monocytogenes. As vancomycin and aptamer recognize L. monocytogenes at different sites, the sandwich recognition showed satisfied specificity. Compared to individual Fe3O4 nanoparticle (NP), NPC exhibit collective effect-enhanced catalytic activity for the color reaction of chromogenic substrate. The change in absorbance or color could represent the concentration of target. Using the Fe3O4 NPC-based signal amplification method, L. monocytogenes whole cells could be directly assayed within a linear range of 5.4×10(3)-10(8) cfu/mL and a visual limit of detection of 5.4×10(3) cfu/mL. Fe3O4 NPC-based method was more sensitive than the Fe3O4 NP-based method. All these attractive characteristics of highly sensitivity, visual and labor-saving, make the biosensor possess a potential application for foodborne pathogenic bacteria detection.